Daily Archives

Articles indexed Monday June 18 2012

Page 8/16 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Do 10m external SAS cables work?

  - by Joachim Sauer

  According to the Wikipedia page external SAS cables are specified for up to 10m length. However, I found it pretty hard to actually find places that sell cables of that length. This made me wonder: Are there any known problems with using cables that are as long as this? Will it be more fragile? Slower? And if 10m is not suggested, would 6m be any more stable? A little background: for several reasons we'd like to put a tape library physically separate from our main server and 10m would be enough to put it on a separate floor.

  Read the article

• VLAN ID 4095 for guest VLAN tagging

  - by user121282

  Just want to know if it's true that if you use the VLAN ID 4095 for guest VLAN tagging, then vMotion will not work correctly as there is nowhere to pass back the reverse arp to? So, the problem we have noticed is when we have vmotioned VM's that are tagged on our trunk network, you cannot ping them from anywhere between 30-300 seconds. The hosts don't know which VLAN the guest is on. Is this right and also the correct behaviour? Thanks

  Read the article

• Exchange 2010 550 5.7.1 unable to relay

  - by isorfir

  I have a website application that needs to send email via our Exchange servers. It sends email internally fine, but when sending to an external address I get the 550 5.7.1 unable to relay error. I followed this guide to create a connector to allow relay. Unfortunately, all office email was trying to use that connector and was not being routed correctly. It also appeared as though it opened it up for spammers to use. This is obviously unacceptable and a secure method is needed.

  Read the article

• How to patch Solaris

  - by Gk.

  I have Solaris 10 and 11 running on my system. I want to update all of them to newest patch. I don't have license or support plan for Solaris yet (the OS is pre-installed on my server). On Solaris 11 I heard I need a support license and a cert to connect to Oracle software repository. What about Solaris 10? Can I fetch patch bundle and install it without connect to Oracle (for both Solaris 10 and 11)? TIA.

  Read the article

• Address rewriting postfix

  - by ACHAL

  I am using CentOs5 and postfix as an MTA for my server. My situation is as follows:- I have a mail server through which Php applications connect and send mails to the destination addresses. The problem is that the the application servers do not have spf/dkim record set up and my server which actually relays the mails to the network has spf/dkim records. So i want the mail sent by an application having a return address:[email protected] to change to [email protected]. r09.4reseller.org is hostname of my mail server. This i have done by generic mapping in postfix: smtp_generic_maps = hash:/etc/postfix/generic In /etc/postfix/generic: [email protected] [email protected] This is working as return address is changed to [email protected] when mail is sent. But when i try to sent mail on [email protected] I don't get mail on [email protected]. I have tried virtual mapping in postfix i.e by the file /etc/postfix/virtual but its not helping.

  Read the article

• Yum update not working on CentOS 6.2 minimal install

  - by Owen

  Note: This is my first question on the stack exchange network so please give mercy and provide guidance where needed. I have installed a CentOS 6.2 KVM guest and I am having problem getting yum to work. This is my first time working with CentOS so I feel that it's a setting somewhere that I am missing but cannot find using google. Here are my steps; Downloaded CentOS-6.2-x86_64-minimal.iso, booted, and went through default steps (only questions asked where keyboard, timezone, root password and use entire hdd) Restarted, logged in, pinged google.com to no avail Set the following settings; vi /etc/resolv.conf nameserver 8.8.8.8 nameserver 8.8.4.4 vi /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE="eth0" HWADDR="52:54:00:42:1B:4A" #NM_CONTROLLED="yes" BOOTPROTO=none ONBOOT="yes" NETMASK=255.255.255.0 IPADDR=192.168.122.151 TYPE=Ethernet vi /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=server3.example.com GATEWAY=192.168.122.1 I can now ping google.com ping google.com PING google.com (173.194.70.139) 56(84) bytes of data. 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=1 ttl=50 time=5.88 ms 64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_seq=2 ttl=50 time=5.77 ms But I cannot 'yum update' yum update Loaded plugins: fastestmirror, presto Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=6&arch=x86_64&repo=os error was 14: PYCURL ERROR 7 - "Failed to connect to 2a01:c0:2:4:216:3eff:fe0d:266d: Network is unreachable" Error: Cannot find a valid baseurl for repo: base My KVM guest is also NAT'd incase it's of concern.

  Read the article

• Test site speed

  - by Elad Lachmi

  I am test driving an Akmai CDN architecture and before committing to buy, I would like to gauge the real performance gain from the acceleration feature. What would be the best MO for doing speed tests from different locations around the world? I would like to test the page load speed and not just the server response time. I would like to test speed from as many edge locations as possible. I do not mind a paid service as well, if it is optimal. Thank you!

  Read the article

• Is it possible to open an Active Director or Exchange Management Console user dialog directly from Powershell?

  - by Myrddin Emrys

  I'd like to be able to launch either the AD user dialog, or the EMC mailbox dialog directly from a Powershell script to open a specific user. The workflow goes something to the effect of "Does everything look correct on this user? Y/N" to continuing on, or to bringing up the account to edit. There's no reason to completely duplicate the functionality of these dialogs. I don't mind requiring that EMC or ADU&C already be open before the script is run, if necessary.

  Read the article

• SPF blocking some emails. How to complete disable it?

  - by Rafael Colucci

  We have configured a SMTP server on IIS. We have not configured any SPF rule. Some emails are going straight to the badmail folder. Most of them have this error message: Address does not pass the Sender Policy Framework Is there any way to disable that? I know this is insecure and spammers could use it to send spam, but I really need it to be disabled for now until I have configured and tested the SPF correctly.

  Read the article

• Workaround for API limits [closed]

  - by blunders

  Problem: Planning on building out a client services company that requires access to APIs. Most APIs are limited based on user, IP, etc. - and even though the API calls would be on a per client basis, there's no way to get usage not tied to IPs. (Theoretical) Solution: Have each client install on their network a proxy/VPN that would allow my systems to connect and use their assigned usage. So, it's possible there's a better solution than the one I've thought of, but it's the only one I've been able to come up with.

  Read the article

• pam_ecryptfs: Error getting passwd (ProFTPD)

  - by Olirav

  proftpd: pam_ecryptfs: Error getting passwd info for user [USERNAME] I am getting this error in the syslog nearly every time any user connects via FTP, the user is able to connect and the session seems to continue without a hitch. ProFTPD.log shows no error, this warning only show in the syslog. My VPS is running Ubuntu 11.10 and Proftpd 1.3.4rc2 from the Ubuntu Repo, I have made only a few changes to the config (no weird auth methods). This has been going on for quite a while but I can't quite find the cause. Anyone got any ideas? EDIT: been looking around but all I can find with this error is the source code for the program itself; it appears to be and error in ecryptfs-utils that only proftpd is triggering.

  Read the article

• Any need to make backup of data on Amazon S3?

  - by Chrille

  I'm hosting 200 GB of product images at S3 (this is my primary file host). Do I need to back that data up somewhere else, or is S3 safe as it is? I have been experimenting with mounting the S3 bucket to a EC2 instance, and then making a nightly rsync backup. The problem is that it's about 3 million files, so it takes a while to generate the different rsync needs. The backup actually takes about 3 days to complete. Any ideas how to do this better? (if it's even necessary?)

  Read the article

• Monitor ESXi hosts with Nagios

  - by Kyle Brandt

  Does anyone recommend any methods for monitoring ESXi 4.1 hosts with Nagios? I have looked into SNMP but it seems to be in a pretty sorry state. Net-SNMP does not seem to be included and there is a built it SNMP daemon that I set up. However from the standard MIBs there only seems to really be network interface counters and the VMWare MIBs seem quite useless. Right now I am considering SNMP for the interface speed and trying the plugins listed at http://unimpressed.org/post/96949609/monitoring-esxi-performance-through-nagios . Anyone have a better idea? I would like to monitor the hosts directly, not through something like vCenter.

  Read the article

• How to efficiently restore Library folder partially deleted on OS X

  - by flow

  I am using OS X Lion, and trying to delete some files I did accidentally (from home directoy): rm -fr Library I realized about this some 15 seconds later and did killall rm Some folders have been deleted, of course, inside "Library". Now the system seems to be ok, but I fear what will happen in case of reboot. I have a Time Machine backup from 5 days ago. I wonder if it would be a good solution, just to copy whole "Library" folder from my home directory from backup and replace this one. Or, what do you think would be the best approach? PS: In order to restore just deleted directories inside "Library", in which order does "rm" start to delete directories, alphabetically?

  Read the article

• Understanding !d command in sed with respect to saves

  - by richardh

  I have a directory of tab-delimited text files and some have comments in the first few lines that I would like to delete. I know that the first good line starts with "Mark" so I can use /^Mark/,$!d to delete these comments. After this deletion I have several other replacements that I make in the (new) first line that has variable names. My question is, why do I have to save sed's output to get my script to work? I understand that if I line is deleted, then the output doesn't proceed downstream because there is no output. But if I don't delete (i.e., !d) then why do I have to save to file? Thanks! Here is my shell script. (I'm a sed newbie, so any other feedback is also appreciated.) #!/bin/bash for file in *.txt; do mv $file $file.old1 sed -e '/^Mark/,$!d' $file.old1 > $file.old2 sed -e '1s/\([Ss]\)hareholder/\1hrhldr/g'\ -e '1s/\([Ii]\)mmediate/\1mmdt/g'\ -e '1s/\([Nn]\)umber/\1o/g'\ -e '1s/\([Cc]\)ompany/\1o/g'\ -e '1s/\([Ii]\)nformation/\1nfo/g'\ -e '1s/\([Pp]\)ercentage/\1ct/g'\ -e '1s/\([Dd]\)omestic/\1om/g'\ -e '1s/\([Gg]\)lobal/\1lbl/g'\ -e '1s/\([Cc]\)ountry/\1ntry/g'\ -e '1s/\([Ss]\)ource/\1rc/g'\ -e '1s/\([Oo]\)wnership/\1wnrshp/g'\ -e '1s/\([Uu]\)ltimate/\1ltmt/g'\ -e '1s/\([Ii]\)ncorporation/\1ncorp/g'\ -e '1s/\([Tt]\)otal/\1ot/g'\ -e '1s/\([Dd]\)irect/\1ir/g'\ $file.old2 > $file rm -f $file.old* done

  Read the article

• Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

  - by Paula

  I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

  Read the article

• break Folder Protection, Folder Guard Lock or Folder in Windows XP?

  - by SonyAdi

  when I'm making a new partition by the partition magic. Then all of a sudden power failure. Unfortunately because my computer is not equipped with UPS (Power supply Uniterruptible), my computer finally died, too. When power is restored, I tried to turn on the computer. Suddenly my computer can not boot normally into windows. Option through safemode and others all I've tried. The result fails, can not boot at all, into safe mode also can not. And I know the cause. Partition Magic did not finish the work and stopped in the middle of the road and cause the transfer of data files or stopped, finally file2 any default windows were destroyed as well. Unfortunately my important data I store in my document. Finally, I take my hard drive to a friend. Hopes to open a computer hard drive through friend, at least I could save my important data, and then I can install window again by reformatting my hard drive is first. I read the hard drive in explorer my friend, complete with their data, but the data of my important data in my document can not get to go because it requires administrator privileges or the original user's default start my windows (my computer) to open my document folder tersebut.Ini actually very similar to the work or Folder Protection Folder Guard. result I was disappointed and almost desperate to get back my important data is. how do i break Folder Protection, Folder Guard Lock or Folder in Windows XP?

  Read the article

• Is there a way to remove duplicate emails from a remote account?

  - by Mister IT Guru

  I have a user who has multiple duplicated emails across multiple folders on his IMAP account. How he managed to create them is beyond me, but mine is not to reason why, just to fix it! Can anyone recommend an application that I may use to remove the duplicates. (we're talking mailboxes in excess of 9G, and it's a remote server) I don't mind what OS I have to use to clean up the mailbox, I'm just looking for some recommendations. Thanks

  Read the article

• Is it possible to use software raid in Windows 7 on the boot partition?

  - by DoctaJonez

  I want to use RAID 1 on my workstation configuration at work, and I've been looking at using the build in mirror functionality in Windows 7. When you click on the add mirror option it presents you with the following warning. I've done some Google searching and the consensus seems to be that you cannot boot from a dynamic volume, but some forum posts seem to indicate that people have tried this with success (e.g. here). With Google searches producing contradictory information I thought I'd ask you guys for an authoritative answer. Can I use the inbuilt Windows 7 mirroring for my boot partition? Or as I suspect, will it make it unbootable due to it being converted to a dynamic disk?

  Read the article

• How do I find out what's linked to my Excel Worksheet?

  - by dwwilson66

  I've got an Excel 2007 worksheet that I inherited, and each time it opens, I get the dialog box asking if I would like to update values from an outside, linked worksheet. I'm trying to track down if I should be saying yes or no; as I'm not familiar with the linked spreadsheet, nor what types of data it creates, nor if it's even in use and updated regularly. Is there a way I can get a list of worksheets, paths, and linked cells so I can trace the formulae and see which links can be severed? d

  Read the article

• In which order does Excel process its formulae?

  - by dwwilson66

  I've got a fairly large spreadsheet with major calculations going on, and it's starting to slow down every time a value that's part of a calculated field is modified. I'm in the process of optimizing the file, adding arrays where I can, and seeing where I can shave off a few milliseconds here and there. Let's say there's data in Columns A-H. Column H is set based on relationships between values in Columns A, B and C, which change dynamically from an outside program. Users enter the data in Column F. Formulas in D & E calculate relationships between F & H and H & D, respectively. How does Excel manage formulae in the case, for instance, where they're dependent on data further into the sheet? Will my value in H be available the first time that the formulae in D & E calculate? or, will D & E calculate based on an old value for H, because H's update hasn't happened yet? Are there any efficiencies to be gained by positioning dependencies in particular rows or columns in the speadsheet? Do positions above and left the current position get processed sooner than things below and to the right?

  Read the article

• Process keeps creating dump files

  - by Pieter

  We have a Delphi application running on a terminal server that keeps generating dump files. For the same PID, it keeps creating dump files with an interval of around 1 second until the process is killed manually. Another weird thing is the name of the dump files: ±_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_40.dmp ÷_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_42.dmp k_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_39.dmp Ô_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_41.dmp Ž_minidump_default_pid_7916_tid_x6590_2012_6_18_13_48_40.dmp The dump files aren't telling us much and we would like to have a suggestion where we should start looking.

  Read the article

• Do I need a helper column, or can I do this with a formula?

  - by dwwilson66

  I am using this formula =IF((LEFT($B26,2)="<p"),0,IF($B26="",0,IF($F26<>"",0,(FIND("""../",$B26))))) To parse data similar to the following. <nobr>&nbsp;&nbsp;&nbsp;&nbsp;contractor information</nobr><br> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<a href="../City_Electrical_Inspectors.htm"><b> City Electrical Inspectors</b></a><br> <nobr>&nbsp;&nbsp;&nbsp;&nbsp;<a href="../City_Electrical_Inspectors.htm"><b>inspection</b></a></nobr><br> My problem comes in cases such as the first line, in which the line is not a new paragraph nor a link, and my FIND returns an error of #VALUE! Id like to create an IF test to scan the line for the existence of the pattern in my FIND statement before processing that statement. I figured that looking for an error condition may be the way to go. However, the only way I can envision this is as a self-referential formula, similart to the following pseudocode. IF(ISERROR($L26)=TRUE,$L26=0,L$26=the-result-of-the-formula-above) Can this be done with a formula or do I need to use a new helper column? Thanks.

  Read the article

• Updating an Uploaded Zip File without re-uploading the whole files

  - by Stranger

  Imagine I have uploaded a zip file which contains thousands of images and its size is about 2GB. Now I want to add 100 new pictures which their size is about 10MB. The only way I can imagine is that I add these images to my 2GB collection, then upload the whole collection AGAIN!!! But I'm looking for a way that I can inject only new files without re-uploading the whole collection. So is there any way to do this? any good way or software?

  Read the article

• Laptop turns off after 20 minutes of use

  - by Christoph

  My laptop a sony vaio VGN-NW11S http://www.trustedreviews.com/Sony-VAIO-VGN-NW11S-S---15-5in-Laptop_Laptop_review. Everytime i turn it on, in safe mode or not, if i try to open an application i.e. run a process such as google chrome or event viewer, defrag, virus scan, it completely turns off without warning, nor giving a trace of events the next time I switch it on. Apart from that, I had worries it might be my battery or power supply but I dont think it is that, I took the laptop apart cleaning fans etc. and have ordered some cpu paste as I checked to see the condition of the processor. I will post to see if re-applying the paste works. One more thing, when the heavy processes kick in, the fan starts to make a lot of noise, maybe trying to cool down the CPU? Any ideas on what else it could be and what I could do to test what is wrong?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >