Daily Archives

Articles indexed Tuesday June 3 2014

Page 8/19 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • How to install aircrack on Ubuntu 12.04

    - by user287903
    I have downloaded the tar.gz package from the site and then I have extracted using tar -zxvf command as mentioned over there. After that I used sudo apt-get install build-essential then I further installed libssl-dev. Then I changed directory to the aircrack folder. But when I type either sudo make or just make I am getting this same error. I don't know what to do. I have installed the file what they have asked in the error as well. Still the same error is shown. Okay I am not permitted to upload images. The error is : common.mak:85: *** Cannot find development files for any supported version of libnl. install either libnl1 or libnl3.. Stop.

    Read the article

  • ubuntu 14 painfully slow on dell r200

    - by sirmonkey
    I didn't notice it at first. The machines (there is 20 plus) are to be used a simple file servers. It wasn't until samba just wouldn't act right that I installed a desktop gui and started more diagnoseing the problem did I catch the slow preformance... I've tested 4 servers they all suck. And windows 7 runs fantastic on them. I have Google and searched. But nothing to explain this. The easy test is dmesg is so slow you can almost read it. I'm guessing it's an apic or cpu power management issue. What output would you all like????? It is a core2 machine with 4Gb of ram. On board data.

    Read the article

  • Ubuntu not booting after install from USB (kernel panic?)

    - by user287782
    After booting fine frome a live USB I installed it and everything was going swimmingly but when I try to boot from the hard drive it just stops and I have to do a hard reboot. I tried booting into grub as recommended in other questions but it wouldn't work. Here is a photo of the boot once stuck: Same for recovery boot: I've got an Asus K43SJ laptop with an intel i5, 4Gb of RAM, an nVidia GeForce GT 520M and a 750Gb hard drive.

    Read the article

  • Windows no longer display with proprietary ATI Catalyst drivers

    - by Insomniac
    I recently started having an issue that opening any application would would show nothing on screen. At the time I noticed it I assumed it was an incompatibility between the new 14 update so reinstalled the old 13.10 iso I used originally. I have now tried a range of ATI drivers including the latest and the exact file I installed the first time with the same results. I can only assume then that it is one of the updates applied at some point, but have no idea which one or how I would go about rolling these back or getting earlier versions of packages. Is anyone else getting this issue? The system has 2 ati 6850s installed, not in crossfire. The open source drivers work fine but I need the ATI ones for cgminer to work.

    Read the article

  • Super+digit takes precedence over Ctrl+Super+digit

    - by Gauthier
    I use Ctrl+Super+digit` to switch workspace. I also use Super+digit to start programs that are pinned to the bar (unity default). The problem is that when I try to switch workspace, if I happen to press Super before Ctrl, Super+digit is executed as if Ctrl was never pressed although it is. How do I make sure that Ctrl+Super+digit is recognized as such, whatever the order in which Ctrl and Super were pressed?

    Read the article

  • Error installing packages using Synaptic in Ubuntu 14.04 ?

    - by Mr_Chmod
    Each time I install something with synaptic I received the following error when I click in details: (synaptic:16174): GLib-CRITICAL **: g_child_watch_add_full: assertion 'pid > 0' failed The packages are installed with no problem at all. I have google it and I know that many people have this error I was wondering if this is already being analysed or if there is a fix for it... ERROR MESSAGE From Synaptic:

    Read the article

  • va_getDriverName() failed with unknown

    - by MIkCode
    i upgraded to 14.04 and afterwards i got an issue with cpu usage when playing HD. I checked the vainfo and this what i got back ibva info: VA-API version 0.35.0 libva info: va_getDriverName() returns -1 libva error: va_getDriverName() failed with unknown libva error,driver_name=(null) vaInitialize failed with error code -1 (unknown libva error),exit I re install the driver sudo apt-get --reinstall install i965-va-driver but i steel got the same error. Any thoghts

    Read the article

  • How to install Juniper VPN on Ubuntu 14.04 LTS?

    - by Max Ricardo Mercurio Ribeiro
    Could you please help me ? On my old Ubuntu 13.10 I was able to run Juniper VPN (on Firefox only) using a workaround which requires you to install the missing 32libs and IcedTea (32bits). However, I recently upgraded from Ubuntu 13.10 to 14.04 (both 64 bits) and my Juniper VPN does not work anymore because it fails during startup showing the following message: "Please ensure that necessary 32 bit libraries are installed. For more details, refer KB article KB25230" "Setup failed. Please install 32 bit Java and update alternatives links using update-alternatives command. For more details, refer KB article KB25230" For some odd reason, it seems the 14.04 upgrade do not work anymore with the openjdk-7:386 and consequently the Juniper VPN as well. Any ideas ? Thanks

    Read the article

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • Uploading or attaching files that located on a shared drive doesn't work?

    - by Alex
    I have this odd, quite minor, but annoying issue that I am quite perplexed about. Whenever I try to upload a file via my browser(let's say attach a file to an email in GMail), I click 'Browse' button and it opens standard file selection dialog, that doesn't show network drives. Further more if I try to drag a file from a network drive into GMail, it doesn't work either, it just doesn't let me do that. This issue has been around for quite sometime now, and I am just curious if this is something on my side or if it's a bug or a misconfiguration of some sort. FWIW, I am currently running 10.10, network drive is a samba share on NAS. This happens in FF and Chrome and this is only happens with Samba mounts. As a matter of fact, NFS volumes that are located on the same network operate perfectly fine.

    Read the article

  • Is this the place to ask SEO questions [on hold]

    - by user39206
    I'm adding business listings to an existing website of which Google has sort of been referencing well but my Meta tags have a lot to be desired! Due to other work commitments I have kind of neglected the site but now think I should put the proper time and effort into getting it just right as it does earn me money. I am a developer so I have all the necessary skills to build the site, it's almost done!. Now I'm just a little worried that I could do something wrong and loose the rapport I've built up with Google in the past or be ban. Especially with the new tags I see like: <link rel=”publisher” href=”https://plus.google.com/[YOUR BUSINESS G+ PROFILE HERE]“/> Really I just want to know for now, is this the place to ask SEO question?

    Read the article

  • Can other domain registrars view non-public whois information?

    - by user3188544
    If my domains are hosted at a registrar (lets take Gandi, for example) and it has privacy protection on the whois information, can another ICANN-accredited registrar (GoDaddy, for example) still view my actual information that is behind the privacy guard? i.e. I don't have a GoDaddy account. But, since they are ICANN-accredited, could they access the real whois info without the privacy protection?

    Read the article

  • Wordpress theme usage rights with GPLv2

    - by user3177012
    I've been searching for a great looking wordpress theme to use on a small magazine website idea that I had and I've just found one that would be ideal, with lots of blank spaces specifically designed for adverts - But then when I came to download it there was a notice: License: GPLv2 or later. Type: Non-Commercial Does this mean that you can use the theme but not use the advert space? What are the limitations?

    Read the article

  • SEO: best way to deal with short lifetime URLs?

    - by Mike Norgate
    I am currently in the process of redesigning a job advert site and am trying to put a lot more effort into my SEO. My question is how should I deal with the URLs that point to job adverts when the advert expires. The options I have thought of so far are: Return a 404 error and redirect to a 404 page. Will it have an effect on ranking if there are a lot of URLs that return 404s after only being up for a few weeks? Redirect to job listing page - When the user requests a URL for an advert that has expired just redirect to the main job listing page. Show the advert but tell the user to has closed - Show the advert page but with a notification that the advert has closed. The issue I see with this is that the user will visit the page, see its closed and then leave the site again which would not be good for rankings

    Read the article

  • SEO and internal links

    - by hanazair
    I'm fairly new to SEO and although I've read many articles on the topic I still don't have a clear idea of how to get my client's website get to the first page of Google Search. I run MOZ competitor analysis and see that a competitor that comes up at the top of Google Search has approximately same Domain Authority, Domain Moz Rank and Trust. They have 8 External Linking Root Domains while my client's site has five. Yet the competitor comes up as one of the top sites on the first page, and my client's side is on page #3. Then I noticed one drastic difference in competitor's ranking and that is Total Links. He has 1,388! I don't understand how this could be a positive factor in Search Engine ranking and how can they legitimately have 1,388 links (while only 14 of those are external). Another competitor who is #2 in search engine rankings has 773 links total with only 14 external links. It seems fishy, but yet there they are - at the top of the search engine results. Is that some current way to trick Search Engines? What to do if I'd like to get my client's website onto the first page by some legitimate means? Thanks.

    Read the article

  • Transfer ownership of abandoned Google Analytics account

    - by Bobe
    The web team of a new client was fully responsible for the client's Google Analytics account, meaning the client didn't keep records of the account. Now that that web team has gone under we are trying to retrieve the account. Is it possible to request an account to be transferred to another owner, or alternatively have a full-privileged user added to the account? What steps should I take to resolve this issue with Google?

    Read the article

  • How can I show contextual ads after a user filtered page contents by keyword?

    - by lex82
    I am building a social bookmarking service that is monetized in part by Google Adsense. However, I don't know how to influence how the ads are displayed. I think Google scans my pages and decides itself which ads to show where. Navigation on my site is mainly based on the selection of categories or tags being provided by the users. So after a user filters a list of bookmarks by the tag "SEO", I think I know pretty well what he is looking for. So I am looking for a service that allows me to show contextual ads for these particular keywords. How I can guide Google to show relevant ads? Can you recommend an alternative ad network, that gives me more control?

    Read the article

  • why is glVertexAttribDivisor crashing?

    - by 2am
    I am trying to render some trees with instancing. This is rather weird, but before sleeping yesterday night, I checked the code, and it was in a running state, when I got up this morning, it is crashing when I am calling glVertexAttribDivisor I haven't changed any code since yesterday. Here is how I am sending data to GPU for instancing. glGenBuffers(1, &iVBO); glBindBuffer(GL_ARRAY_BUFFER, iVBO); glBufferData(GL_ARRAY_BUFFER, (ml_instance->i_positions.size()*sizeof(glm::vec4)) , NULL, GL_STATIC_DRAW); glBufferSubData(GL_ARRAY_BUFFER, 0, (ml_instance->i_positions.size()*sizeof(glm::vec4)), &ml_instance->i_positions[0]); And then in vertex specification-- glBindBuffer(GL_ARRAY_BUFFER, iVBO); glVertexAttribPointer(i_positions, 4, GL_FLOAT, GL_FALSE, 0, 0); glEnableVertexAttribArray(i_positions); glVertexAttribDivisor(i_positions,1); // **THIS IS WHERE THE PROGRAM CRASHES** glDrawElementsInstanced(GL_TRIANGLES, indices.size(), GL_UNSIGNED_INT, 0,TREES_INSTANCE_COUNT); I have checked ml_instance->i_positions, it has all the data that needs to render. I have checked the value of i_positions in vertex shader, it is the same as whatever I have defined there. I am little out of ideas here, everything looks pretty much fine. What am I missing?

    Read the article

  • ng-grid get filtered column count after filtering

    - by Ryan Langton
    I'm using ng-grid with filtering. Any time the filter updates I want to get the filtered item count. I have been able to do this using the filteredRows property of ngGrid. However I'm getting the rows BEFORE the filtering occurs and I want them AFTER the filtering occurs. Here is a plunker to demonstrate the behavior: http://plnkr.co/edit/onyE9e?p=preview Here is the code where filtering is occuring: $scope.$watch('gridOptions.filterOptions.filterText2', function(searchText, oldsearchText) { if (searchText !== oldsearchText) { $scope.gridOptions.filterOptions.filterText = "name:" + searchText + "; "; $scope.recordCount = $scope.gridOptions.ngGrid.filteredRows.length; } });

    Read the article

  • How do I confirm a pdf loaded correctly with Watir webdriver testing

    - by Mike Rose
    This is a general type question that I dont know what code I could post that would help get an answer. So I apologize in advance, but if some piece of code would help, please let me know and Ill add it. The question is, how do I confirm that a pdf loaded in a web browser when using Ruby/Cucumber/Watir Webdriver? My test clicks on a random link that should load a pdf in a new browser window, so I cant check the url because it will vary with each test. Any ideas how I can make sure the correct pdf loads after clicking the link that should load it?

    Read the article

  • git merge, git rebase none seems to work, should I delete my github fork and refork from the upstream master?

    - by Joan Yin
    I have to confess my github sins. 4 month ago, I forked a upstream repo, without knowing much of git and pull request, i did some work on master branch locally, later on I realized the mistake, created a new branch, and squashed the changes to one and successfully send a PR later from that branch. the PR is accepted, and I moved on. Now I need to submit another PR. But my master branch is so messed up, when I do merge, or rebase, there are so many mistakes. I probably committed a few more sins this morning. I have been battling this for the whole morning now. so it comes to the point that I want a clean start. Can I delete the github fork and refork from the upstream master? What are the correct steps?

    Read the article

  • Ember model is gone when I use the renderTemplate hook

    - by Mickael Caruso
    I have a single template - editPerson.hbs <form role="form"> FirstName: {{input type="text" value=model.firstName }} <br/> LastName: {{input type="text" value=model.lastName }} </form> I want to render this template when the user wants to edit an existing person or create a new person. So, I set up routes: App.Router.map(function(){ this.route("createPerson", { path: "/person/new" }); this.route("editPerson", { path: "/person/:id}); // other routes not show for brevity }); So, I define two routes - one for create and one for edit: App.CreatePersonRoute = Ember.Route.extend({ renderTemplate: function(){ this.render("editPerson", { controller: "editPerson" }); }, model: function(){ return {firstName: "John", lastName: "Smith" }; } }); App.EditPersonRoute = Ember.Route.extend({ model: function(id){ return {firstName: "John Existing", lastName: "Smith Existing" }; } }); So, I hard-code the models. I'm concerned about the createPerson route. I'm telling it to render the editPersonTemplate and to use the editPerson controller (which I don't show because I don't think it matters - but I made one, though.) When I use renderTemplate, I lose the model John Smith, which in turn, won't display on the editTemplate on the web page. Why? I "fixed" this by creating a separate and identical (to editPerson.hbs) createPerson.hbs, and removing the renderTemplate hook in the CreatePerson. It works as expected, but I find it somewhat troubling to have a separate and identical template for the edit and create cases. I looked everywhere for how to properly do this, and I found no answers.

    Read the article

  • Word wrapping issue in text file export

    - by photec
    I just whipped up a program to export a dataset to a text file and am running into a issue with data from an observation being wrapped to the line below in the exported file. Below is a stripped down version of my program and the text seems to be wrapping at column 1025. Does anyone happen to know why this is occurring and how to go about ensuring that record data stays on its own row? Any help would be greatly appreciated. data ; set (firstobs = 1 obs = 75); file '\' lrecl = 32767; put first_var $1 ... last_var 1244; run;

    Read the article

  • Error using paho-mqtt in App Engine Python App

    - by calumb
    I am trying to right a Google Cloud Platform app in python with Flask that makes an MQTT connection. I have included the paho python library by doing pip install paho-mqtt -t libs/. However, when I try to run the app, even if I don't try to connect to MQTT. I get a weird error about IP address checking: RuntimeError: error('illegal IP address string passed to inet_pton',) It seems something in the remote_socket lib is causing a problem. Is this a security issue? Is there someway to disable it? Relevant code: from flask import Flask import paho.mqtt.client as mqtt import logging as logger app = Flask(__name__) # Note: We don't need to call run() since our application is embedded within # the App Engine WSGI application server. #callback to print out connection status def on_connect(mosq, obj, rc): logger.info('on_connect') if rc == 0: logger.info("Connected") mqttc.subscribe('test', 0) else: logger.info(rc) def on_message(mqttc, obj, msg): logger.info(msg.topic+" "+str(msg.qos)+" "+str(msg.payload)) mqttc = mqtt.Client("mqttpy") mqttc.on_message = on_message mqttc.on_connect = on_connect As well as full stack trace: ERROR 2014-06-03 15:14:57,285 wsgi.py:262] Traceback (most recent call last): File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/runtime/wsgi.py", line 239, in Handle handler = _config_handle.add_wsgi_middleware(self._LoadHandler()) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/runtime/wsgi.py", line 298, in _LoadHandler handler, path, err = LoadObject(self._handler) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/runtime/wsgi.py", line 84, in LoadObject obj = __import__(path[0]) File "/Users/cbarnes/code/ignite/tank-demo/appengine-flask-demo/main.py", line 24, in <module> mqttc = mqtt.Client("mqtthtpp") File "/Users/cbarnes/code/ignite/tank-demo/appengine-flask-demo/lib/paho/mqtt/client.py", line 403, in __init__ self._sockpairR, self._sockpairW = _socketpair_compat() File "/Users/cbarnes/code/ignite/tank-demo/appengine-flask-demo/lib/paho/mqtt/client.py", line 255, in _socketpair_compat listensock.bind(("localhost", 0)) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/dist27/socket.py", line 222, in meth return getattr(self._sock,name)(*args) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 668, in bind self._SetProtoFromAddr(request.mutable_proxy_external_ip(), address) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 632, in _SetProtoFromAddr proto.set_packed_address(self._GetPackedAddr(address)) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 627, in _GetPackedAddr AI_NUMERICSERV|AI_PASSIVE): File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 338, in getaddrinfo canonical=(flags & AI_CANONNAME)) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 211, in _Resolve canon, aliases, addresses = _ResolveName(name, families) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/remote_socket/_remote_socket.py", line 229, in _ResolveName apiproxy_stub_map.MakeSyncCall('remote_socket', 'Resolve', request, reply) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/apiproxy_stub_map.py", line 94, in MakeSyncCall return stubmap.MakeSyncCall(service, call, request, response) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/apiproxy_stub_map.py", line 328, in MakeSyncCall rpc.CheckSuccess() File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/api/apiproxy_rpc.py", line 156, in _WaitImpl self.request, self.response) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/ext/remote_api/remote_api_stub.py", line 200, in MakeSyncCall self._MakeRealSyncCall(service, call, request, response) File "/Users/cbarnes/google-cloud-sdk/platform/google_appengine/google/appengine/ext/remote_api/remote_api_stub.py", line 234, in _MakeRealSyncCall raise pickle.loads(response_pb.exception()) RuntimeError: error('illegal IP address string passed to inet_pton',) INFO 2014-06-03 15:14:57,291 module.py:639] default: "GET / HTTP/1.1" 500 - Thanks!

    Read the article

  • Nested ng repeat not working

    - by Rodrigo Fonseca
    Ok, i've two ng-repeat working here, the first(board in boards) is working good, no problem, but the second(task in tasks), when i try to get "{{task.title}}" i don't get anything but i can display all the style from it... here is my model: $scope.tasks = [{boardIndex: 0, title: "test"}, {boardIndex: 1, title: "test2"}]; Here is my code(it's in jade, ok?) section(data-ng-repeat="board in boards", ng-cloak) .board_header div(data-ng-controller="AddTaskBtnController") i.add_task_btn.fa.fa-plus-square-o.fa-2x(ng-click='setSelected(board.id)', ng-class="{icon_add_hover: isSelected(board.id)}") h2(data-ng-bind="board.title") .content_board .task(data-ng-repeat="task in tasks", data-ng-if="task.boardIndex == board.id", data-ng-controller='TaskController', data-ng-hide='modeTask', data-ng-init='setTaskId()') .user_icon_task i.fa.fa-user.fa-3x.icon-user-not-selected .quest_task .puzzle_task(data-ng-hide='modeTask') i.fa.fa-check-circle-o.fa-lg h2 {{task.title}} ul.icons_details_task_wrapper li i.fa.fa-check-circle-o span.icon_counter li.pull_left i.fa.fa-puzzle-piece span.icon_counter ul.task_details_wrapper li.task_priority(data-ng-show='goal.selectedDrawAttention', data-ng-click='toggleSelected()', data-ng-class='{draw_attention_selected: goal.selectedDrawAttention }', style='cursor: inherit;') i.fa.fa-eye li.task_priority i.fa .task_time_ago span(am-time-ago='message.time')

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >