Daily Archives

Articles indexed Saturday June 16 2012

Page 9/13 | < Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >

• Atheros AR9485 wireless card doesn't work in an ASUS K53E

  - by John

  I just installed Ubuntu 11.10 32-bit version in dual boot mode on an ASUS K53. Every thing seems to work fine except for the wireless. The wireless works on Windows 7. Ubuntu finds the wireless card, but it does not appear to be turned on. The only physical means of turning on the card is the FN-F2 key combo. That works on Windows, but not in Ubuntu. I've looked in the forums for a solution and I'm not quite sure what to do. I've gathered the following information: jdwbmc@Spatha:~$ cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" Linux Spatha 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux jdwbmc@Spatha:~$ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: AzureWave Device [1a3b:1186] Kernel driver in use: ath9k -- 04:00.0 Ethernet controller [0200]: Atheros Communications AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) Subsystem: ASUSTeK Computer Inc. Device [1043:1851] Kernel driver in use: atl1c jdwbmc@Spatha:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 058f:a014 Alcor Micro Corp. jdwbmc@Spatha:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thrff Fragment thrff Power Managementff jdwbmc@Spatha:~$ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no jdwbmc@Spatha:~$ lsmod Module Size Used by parport_pc 32114 0 ppdev 12849 0 snd_hda_codec_hdmi 31426 1 bnep 17923 2 rfcomm 38408 0 bluetooth 148839 10 bnep,rfcomm snd_hda_codec_realtek 254125 1 binfmt_misc 17292 1 joydev 17393 0 asus_nb_wmi 12469 0 asus_wmi 19333 1 asus_nb_wmi sparse_keymap 13658 1 asus_wmi uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 24262 2 snd_hda_codec 91754 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80468 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 wmi 18744 1 asus_wmi snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event arc4 12473 2 i915 505108 3 snd_timer 28932 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq ath9k 112711 0 psmouse 73673 0 serio_raw 12990 0 mac80211 272785 1 ath9k drm_kms_helper 32889 1 i915 ath9k_common 13599 1 ath9k drm 192226 4 i915,drm_kms_helper ath9k_hw 293893 2 ath9k,ath9k_common ath 19387 2 ath9k,ath9k_hw cfg80211 172392 3 ath9k,mac80211,ath snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_i ntel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,s nd_seq,snd_timer,snd_seq_device soundcore 12600 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm mei 36466 0 i2c_algo_bit 13199 1 i915 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 3 libahci 25727 1 ahci atl1c 36638 0 xhci_hcd 72915 0 jdwbmc@Spatha:/var/lib/NetworkManager$ cat NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true WimaxEnabled=true jdwbmc@Spatha:~$ lspci -nn | grep 0280 02:00.0 Network controller [0280]: Atheros Communications Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) Any help would be appreciated. Thanks.

  Read the article

• Will an Atheros AR928X work with WPA2?

  - by Tommy

  Basically I need only the answer to above question. Please think of that I am new to linux. For further explanation here is the full story: I have the following problem. My friends notebook (Vista) has got a trojan and refuses to work anymore. The Avira Rescue CD did not help either. So I tried an old (9.1) Ubuntu CD and backed up all the essential files. Since we have no Windows Install Disk we want to put Ubuntu on that notebook. But with the 9.1 version there is no WLAN. Systemtest tells me, that it finds an Atheros AR928X, but ifconfig does not show that and the network manager tells me there are no LAN/WLAN devices. So: does that work easier with the new Ubuntu version or is that network adapter a known troublemaker? And: if I get the adapter to work, will it work with the WPA2-network around here?

  Read the article

• Frequent disconnects using wlan AR9285

  - by John Neil

  I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

  Read the article

• How do I install a driver for an Atheros AR9285?

  - by Fernando

  How to install the driver for Atheros AR9285 in Ubuntu 11.10. Still no package for 11.10 according to this https://help.ubuntu.com/community/WifiDocs/Device/Atheros/AR9285 Here is the output of the commands marc@fer-VPCYA1V9E:~$ sudo lshw -class network *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 4c:0f:6e:d6:65:cc width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.0.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:d3400000-d340ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: 54:42:49:a2:1f:bc capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:d2400000-d243ffff ioport:1000(size=128) And the second command marc@fer-VPCYA1V9E:~$ rfkill list 0: sony-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: sony-bluetooth: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: hci0: Bluetooth Soft blocked: no Hard blocked: no 4: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Is there a way to make it work?

  Read the article

• My WiFi gets deauthenticated every few minutes or seconds (Reason: 7)

  - by dan

  My Wifi on my new Thinkpad W520 running Natty keeps dropping out and coming back on. Output from dmesg below. Any advice? [30493.687552] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [30493.689127] wlan0: authenticated [30493.689144] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [30493.693592] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [30493.693595] wlan0: associated [31631.172868] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31631.211847] cfg80211: All devices are disconnected, going to restore regulatory settings [31631.211868] cfg80211: Restoring regulatory settings [31631.211873] cfg80211: Calling CRDA to update world regulatory domain [31631.215037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [31631.215042] cfg80211: World regulatory domain updated: [31631.215044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31631.215046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215049] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31632.289638] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [31632.291262] wlan0: authenticated [31632.291276] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [31632.295119] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [31632.295123] wlan0: associated [31886.234836] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31886.306735] cfg80211: All devices are disconnected, going to restore regulatory settings [31886.306740] cfg80211: Restoring regulatory settings [31886.306744] cfg80211: Calling CRDA to update world regulatory domain

  Read the article

• Book My Cloud Offering FREE PREMIUM Cpanel Accounts

  - by asd

  Book My Cloud Offering FREE PREMIUM Cpanel Accounts Reuqest Type: http://support.bookmycloud.com/ Select Request Type Free Cpanel Hosting Related Features: Resources Disk quota : 10 GB Monthly bandwidth : 300 GB Max FTP Accounts : 5 Max Email Accounts : Unlimited Max Email Lists : Unlimited Max Databases : 500 Max Sub Domains : 500 Max Parked Domains : 100 Max Addon Domains : 1000 Control Panel: Cpanel NO Ads Full DNS Management

  Read the article

• how should I network my turn based game?

  - by ddriver1

  I'm writing a very basic turn based strategy game which allows a player to select units and attack enemy units on their turn. The game is written in Java using the slick2d library and I plan to use kyronet for the networking api. I want the game to be networked, but I do not know how I should go about it. My current idea is to connect two users together, and the first one to join the game becomes the game host, while the other becomes the client. However after reading http://gafferongames.com/networking-for-game-programmers/what-every-programmer-needs-to-know-about-game-networking/ it seems my game would be suited to a peer to peer lockstep model. Would that make programming the networking side much easier? Any suggestions on how I should structure my networking would be greatly appreciated

  Read the article

• How do I make my rain effect look more like rain and less like snowfall?

  - by Nikhil Lamba

  I am making a game in that game I want a rain effect. I am little bit far from this right now. I am creating the rain effect like below: particleSystem.addParticleInitializer(new ColorInitializer(1, 1, 1)); particleSystem.addParticleInitializer(new AlphaInitializer(0)); particleSystem.setBlendFunction(GL10.GL_SRC_ALPHA, GL10.GL_ONE); particleSystem.addParticleInitializer(new VelocityInitializer(2, 2, 20, 10)); particleSystem.addParticleInitializer(new RotationInitializer(0.0f, 30.0f)); particleSystem.addParticleModifier(new ScaleModifier(1.0f, 2.0f, 0, 150)); particleSystem.addParticleModifier(new ColorModifier(1, 1, 1, 1f, 1, 1, 1, 3)); particleSystem.addParticleModifier(new ColorModifier(1, 1, 1f, 1, 1, 1, 1, 6)); particleSystem.addParticleModifier(new AlphaModifier(0, 1, 0, 3)); particleSystem.addParticleModifier(new AlphaModifier(1, 0, 1, 125)); particleSystem.addParticleModifier(new ExpireModifier(50, 50)); scene.attachChild(particleSystem); But it looks like snowfall! What changes can I do for it to look more like rain? EDIT Here is a screenshot:

  Read the article

• Java Play Mustache NPE Error

  - by zanedev

  We are getting a mustache play error in production (amazon linux EC2 AMI) but not in development (MACs) and we have tried upgrading the jvm, using the jdk instead, and changing from a tomcat deploy model to match our development environments as much as possible but nothing is working. Please any help would be greatly appreciated. We have lots of shared code in java and javascript using mustache and it would be a big deal to rewrite everything if we had to ditch mustache on the java side. 20:48:52,403 ERROR ~ @6al2dd0po Internal Server Error (500) for request GET /mystuff/people Execution exception (In {module:mustache-0.2}/app/play/modules/mustache/MustacheTags.java around line 32) NullPointerException occured : null play.exceptions.JavaExecutionException at play.templates.BaseTemplate.throwException(BaseTemplate.java:90) at play.templates.GroovyTemplate.internalRender(GroovyTemplate.java:257) at play.templates.Template.render(Template.java:26) at play.templates.GroovyTemplate.render(GroovyTemplate.java:187) at play.mvc.results.RenderTemplate.<init>(RenderTemplate.java:24) at play.mvc.Controller.renderTemplate(Controller.java:660) at play.mvc.Controller.renderTemplate(Controller.java:640) at play.mvc.Controller.render(Controller.java:695) at controllers.MyStuff.people(MyStuff.java:183) at play.mvc.ActionInvoker.invokeWithContinuation(ActionInvoker.java:548) at play.mvc.ActionInvoker.invoke(ActionInvoker.java:502) at play.mvc.ActionInvoker.invokeControllerMethod(ActionInvoker.java:478) at play.mvc.ActionInvoker.invokeControllerMethod(ActionInvoker.java:473) at play.mvc.ActionInvoker.invoke(ActionInvoker.java:161) at Invocation.HTTP Request(Play!) Caused by: java.lang.NullPointerException at play.modules.mustache.MustacheTags._template(MustacheTags.java:32) at play.modules.mustache.MustacheTags$_template.call(Unknown Source) at /app/views/User/people.html.(line:22) at play.templates.GroovyTemplate.internalRender(GroovyTemplate.java:232) ... 13 more

  Read the article

• Java Socket Connection is flooding network OR resulting in high ping

  - by user1461100

  i have a little problem with my java socket code. I'm writing an android client application which is sending data to a java multithreaded socket server on my pc through direct(!) wireless connection. It works fine but i want to improve it for mobile applications as it is very power consuming by now. When i remove two special lines in my code, the cpu usage of my mobile device (htc one x) is totally okay but then my connection seems to have high ping rates or something like that... Here is a server code snippet where i receive the clients data: while(true) { try { .... Object obj = in.readObject(); if(obj != null) { Class clazz = obj.getClass(); String className = clazz.getName(); if(className.equals("java.lang.String")) { String cmd = (String)obj; if(cmd.equals("dc")) { System.out.println("Client "+id+" disconnected!"); Server.connectedClients[id-1] = false; break; } if(cmd.substring(0,1).equals("!")) { robot.keyRelease(PlayerEnum.getKey(cmd,id)); } else { robot.keyPress(PlayerEnum.getKey(cmd,id)); } } } } catch .... Heres the client part, where i send my data in a while loop: private void networking() { try { if(client != null) { .... out.writeObject(sendQueue.poll()); .... } } catch .... when i write it this why, i send data everytime the while loop gets executed.. when sendQueue is empty, a null "Object" will be send. this results in "high" network traffic and in "high" cpu usage. BUT: all send comments are received nearly immediately. when i change the code to following: while(true) ... if(sendQueue.peek() != null) { out.writeObject(sendQueue.poll()); } ... the cpu usage is totally okay but i'm getting some laggs.. the commands do not arrive fast enough.. as i said, it works fine (besides cpu usage) if i'm sending data(with that null objects) every while execution. but i'm sure that this is very rough coding style because i'm kind of flooding the network. any hints? what am i doing wrong?? Thanks for your Help! Sincerly yours, maaft

  Read the article

• How do I use compiler intrinsic __fmul_?

  - by Eric Thoma

  I am writing a massively parallel GPU application. I have been optimizing it by hand. I received a 20% performance increase with _fdividef(x, y), and according to The Cuda C Programming Guide (section C.2.1), using similar functions for multiplication and adding is also beneficial. The function is stated as this: "_fmulrn,rz,ru,rd". __fdividef(x,y) was not stated with the arguments in brackets. I was wondering, what are those brackets? If I run the simple code: int t = __fmul_(5,4); I a compiler error about how _fmul is undefined. I have the CUDA runtime included, so I don't think it is a setup thing; rather it is something to do with those square brackets. How do I correctly use this function? Thank you.

  Read the article

• Mac OS X: Best way to do runtime check for retina display?

  - by Todd Ditchendorf

  Given a Cocoa application which runs on Mac OS X 10.7 and later: What is the best way to check, at runtime, if your app is currently running on a Mac with at least one retina display attached? If checking for this sort of thing is just really wrong-headed, I fully welcome a well-reasoned explanation of why. But I'd still like to know :). It seems likely you could just do a check specifically for the new Mac Book Pro "Retina" hardware (the only Mac at this time which currently has a retina display), but ideally, I'd really prefer a more general/generic/future-proof way to check than this. Ideally, I'd like to know how to detect the retina display, not the specific Mac model which currently happens to ship with a retina display.

  Read the article

• different markers on google maps v3

  - by user1447313

  i need help again :( How i can add different markers to google map v3. here is example for may marker var latlng = new google.maps.LatLng(lat,lng); var image = "../img/hotel_icon.png"; var locationDescription = this.locationDescription; var marker = new google.maps.Marker({ map: map, position: latlng, title:'pk:'+name, icon: image }); bounds.extend(latlng); setMarkes(map, marker, name, locationDescription); });//close each map.fitBounds(bounds); });//close getjson }//close initialize function setMarkes(map, marker, name, locationDescription){ google.maps.event.addListener(marker, 'mouseover', function() { infowindow.close(); infowindow.setContent('<h3>'+name+'</h3><em>'+locationDescription+'</em>'); infowindow.open(map, marker); }); } is any help

  Read the article

• php soapclient responds as 'null' but xml response is ok using __getLastResponse

  - by Roger S

  I'm looking for help with a php soapclient call: The call is to a remote panel and I want to pull off the log data. There are various services published via the WSDL and I am able to use several with no issues. Here's the list: array(12) { [0]=> string(77) "GetGPTimerChannelsResponse GetGPTimerChannels(GetGPTimerChannels $parameters)" [1]=> string(74) "GetGPTimerChannelResponse GetGPTimerChannel(GetGPTimerChannel $parameters)" [2]=> string(74) "SetGPTimerChannelResponse SetGPTimerChannel(SetGPTimerChannel $parameters)" [3]=> string(47) "GetSlaveResponse GetSlave(GetSlave $parameters)" [4]=> string(71) "GetLogDataInlineResponse GetLogDataInline(GetLogDataInline $parameters)" [5]=> string(71) "GetLogItemInlineResponse GetLogItemInline(GetLogItemInline $parameters)" [6]=> string(59) "GetAlarmListResponse GetAlarmList(GetAlarmList $parameters)" [7]=> string(50) "GetSyslogResponse GetSyslog(GetSyslog $parameters)" [8]=> string(47) "SetSlaveResponse SetSlave(SetSlave $parameters)" [9]=> string(53) "GetVersionResponse GetVersion(GetVersion $parameters)" [10]=> string(53) "GetTDBInfoResponse GetTDBInfo(GetTDBInfo $parameters)" [11]=> string(53) "GetLogItemResponse GetLogItem(GetLogItem $parameters)" } I am trying to use the GetLogDataInline service which requires four parameters - these I'm passing as an array and all seems OK when doing the connection (the request/response takes around 30 seconds to process). When I look at a var_dump / print_r of the result, it returns NULL, whereas when I do a call to the __getLastResponse all of the data I need to populate my local database is there. Below is the code for the soapclient call: $client = new soapclient ("http://192.168.1.126/cgi-bin/cgi.cgi?WSDL", array("trace" => 1, "exceptions" => true, "cache_wsdl" => WSDL_CACHE_NONE, "features" => SOAP_SINGLE_ELEMENT_ARRAYS )); $params = array ( "ResponseType" => "Xml", "Step" => 15, "Start" => "2012-06-14T12:00:00+01:00", "End" => "2012-06-14T23:59:45+01:00" ); $result = $client -> GetLogDataInline ($params); An extract from the var_dump / __getLastResponse is: var_dump($client) object(SoapClient)#1 (4) { ["trace"]= int(1) ["_features"]= int(1) ["_soap_version"]= int(1) ["sdl"]= resource(4) of type (Unknown) } var_dump($result) NULL __getLastResponse 15 2012-06-14T12:00:00+01:00 2012-06-14T23:59:45+01:00 External Temperature Workshop Lux Level Electricity Pulse 100wh Workshop PIR Active Boiler Flow Temp Outside Lux Workshop_Light_Override_Hours Water Consumption (Litres) Electricity kWh Consumption Water Consumption M3 Gas kWh Consumption Outside Lighting Heating Effective Setpoint Router Reset Workshop Lighting State Heating Run Hours Heating On Receptin Percent RH Reception Temp Reception RH Reception Temp 2012-06-14T12:00:00+01:00 -85.6 2.1 -1.0 Off -91.5 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:15+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:30+01:00 -85.4 2.1 -1.0 Off -91.8 13.8 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 53.0 22.0 53.0 22.0 2012-06-14T12:00:45+01:00 -85.4 2.1 -1.0 Off -91.5 13.7 0.0 -1.0 0.0 0.0 -0.1 Off 21.0 Off Off 0.0 Off 54.0 22.0 54.0 22.0 (this should be xml but doesn't appear to have copied correctly) If you've got this far, thanks for taking the time. Any help would be much appreciated.

  Read the article

• IE8 removes background-color of header row of Asp:Gridview

  - by Hitesh Riziya

  I am using Asp.net 4.0 GridView control to display data from database. I have applied the inbuilt theme to GridView. <asp:GridView ID="gv" runat="server" CellPadding="4" EmptyDataText="No records found." ForeColor="#333333" OnRowCommand="gv_RowCommand" Width="99%" OnPageIndexChanging="gv_PageIndexChanged" PageSize="50" AllowPaging="True" GridLines="None" AutoGenerateColumns="true"> <AlternatingRowStyle BackColor="White" /> <EditRowStyle BackColor="#7C6F57" /> <FooterStyle BackColor="#1C5E55" Font-Bold="True" ForeColor="White" /> <HeaderStyle CssClass="GridHeader" BackColor="#1C5E55" Font-Bold="True" ForeColor="White" HorizontalAlign="Left" /> <PagerStyle BackColor="#666666" ForeColor="White" HorizontalAlign="Center" /> <RowStyle BackColor="#E3EAEB" /> <SelectedRowStyle BackColor="#C5BBAF" Font-Bold="True" ForeColor="#333333" /> <SortedAscendingCellStyle BackColor="#F8FAFA" /> <SortedAscendingHeaderStyle BackColor="#246B61" /> <SortedDescendingCellStyle BackColor="#D4DFE1" /> <SortedDescendingHeaderStyle BackColor="#15524A" /></asp:GridView> I tried setting the CSS forcefully in my Master page .GridHeader { background-color:#1C5E55 !important;} But I am still missing the background-color. I can see the backgroundcolor applied to grid (for less-than 1 sec) while the page loading the js/css content NOTE: I already tried clearing cache of IE, ctrl + F5, shift + reload etc. Here is sample page of my issue. http://vd2.weenggs.com/Items.aspx email: [email protected] pass: test Thanks

  Read the article

• Rails 3 Create method using nested resources?

  - by user1461119

  How can I clean this up using rails 3 features? I have a post that belongs to a group and also a user. The group and user has_many posts. I am using a nested resource resources :groups do resources :posts end <%= form_for @post, :url => group_posts_path(params[:group_id]) do |f| %> .... <% end %> def create @group = Group.find(1) @post = @group.posts.build(params[:post]) @post.user_id = current_user.id respond_to do |format| if @post.save ..... end end end Thank you.

  Read the article

• how to use sed/awk to remove words with multiple pattern count

  - by user1461112

  I have a file of string records where one of the fields - delimited by "," - can contain one or more "-" inside it. The goal is to delete the field value if it contains more than two "-". i am trying to recoup my past knowledge of sed/awk but can't make much headway ========== info,whitepaper,Data-Centers,yes-the-6-top-problems-in-your-data-center-lane info,whitepaper,Data-Centers,the-evolution-center info,whitepaper,Data-Centers,the-evolution-of-lan-technology-lanner ========== expected outcome: info,whitepaper,Data-Centers info,whitepaper,Data-Centers,the-evolution-center info,whitepaper,Data-Centers thanks

  Read the article

• Calling function from an object with event listener

  - by Mirat Can Bayrak

  i have a view model something like this: CANVAS = getElementById... RemixView = function(attrs) { this.model = attrs.model; this.dragging = false; this.init(); }; RemixView.prototype = { init: function() { CANVAS.addEventListener("click", this.handleClick); }, handleClick: function(ev) { var obj = this.getHoveredObject(ev); }, getHoveredObject: function(ev) {} ... ... } rv = new RemixView() the problem is my when clickHandler event fired, this object is being equal to CANVAS object, not RemixView. So i get error that says: this.getHoveredObject is not a function What is correct approach at that stuation?

  Read the article

• vertical align img

  - by JK36

  I have a div called "images" which has a width of 277px. Within that div I have 9 images in it, just stored as tags. I've got the images to float left and line up quite nicely within my div, but I would like the images to align vertically, as some are portrait and others are landscape. I know I can do this if I enclose each image in a div, but the plugin I use to launch the gallery won't recognise which image is being fired, so i need to enclose them as just within the tags. This is the code I have, if someone can help me just align the images horizontally and vertically. I don't want the images to be skewed. #images_box a { float:left; padding:9px; width: 70px; height: 70px; text-align: center; vertical-align: middle; display: table-cell; } my data <div id="images"> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7069/7060779347_fbee5aae15_b.jpg" title="morning after[explored] (mariosworld343)"> <img src="http://farm8.staticflickr.com/7069/7060779347_fbee5aae15_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7234/7047458501_46a2203733_b.jpg" title="Self confined... (TVidhya)"> <img src="http://farm8.staticflickr.com/7234/7047458501_46a2203733_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7053/6918451990_20fa76f338_b.jpg" title="kleiner schrittmacher (KatjaGiersig)"> <img src="http://farm8.staticflickr.com/7053/6918451990_20fa76f338_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7121/7059981833_abe404f4a0_b.jpg" title="(caro diario.)"> <img src="http://farm8.staticflickr.com/7121/7059981833_abe404f4a0_m.jpg" alt="" /> </a> </div>

  Read the article

• ShowWindow not working from a DLL on a 64-bit OS?

  - by Auto Roast

  I have a process that calls SetWindowsHook to catch keyboard events. In the DLL that processes the events, I conditionally call ShowWindow on the handle of the window of the process who set the hook. That code works perfectly on a 32-bit OS (XP) and as a 32-bit application on a 64-bit OS, but when compiled to 64-bit, the window is not showing. The code to make the window visible is: if (idx == passlen) { HWND h = FindWindow(NULL,windowNameToShow); ShowWindow(h,SW_SHOW); idx = 0; logger->backerase(passlen - 1); nextCharToMatch = passPointer; }

  Read the article

• Checking if user owns file before deleting it

  - by Martin Hoe

  I'm building an API for my site that allows users to delete the files they upload. Obviously, I want to check if the user owns that file before they delete it through the API. I have a files table and a users table, here's the schema: f_id, s_id, u_id, name, size, uploaded u_id, username, password, email, activated, activation_code u_id is a foreign key. The u_id field in the files table points to the u_id in the users table. Given the users username, I want to find the users u_id, and then check if they own the file through the file ID (f_id). I wrote this SQL: $sql = 'SELECT u.username FROM `users` u JOIN `files` f ON u.u_id = f.u_id WHERE f_id = ? AND u.u_id = ? LIMIT 1'; I'm assuming that'd work if I was given the users u_id in the API request, but alas I'm given only their username. How can I modify that SQL to find their user ID and use that? Thanks. Edit: Alright I've got this query but it's always returning an empty result set even though both the file ID and username exist. SELECT u.username FROM `users` u JOIN `files` f ON u.u_id = f.u_id WHERE f.f_id = ? AND u.username = ? LIMIT 1

  Read the article

• Update a tableView with a plist took from another table

  - by Pheel

  Background: I have a tab bar application, which has a tableView as the "heart" of the app. It loads data from a plist and, through a button that checks if there are any updates on the remote plist file, updates the local plist with the remote contents. Then, i have another tableView, that should display only those plist items that have a bool value set to YES. Now i want to add a button to the second table that reloads the plist took from the first table. Expected: When i update the local plist from the first table and when i press the button on the second table, the 2nd table is supposed to update and show the cells with that bool value set to YES. (Note: I set YES as default to some items on plist). What happens: The first table updates its content from remote. The second table shows the old items with the value set to YES. When i press the button to refresh data, it reads the plist fine (by logging it, it has the same contents of the first table -only those set to YES-),but it doesn't update data even if i have [self.tableView reloadData];. When i close the app and open it again, the second table is filled with the right items. :\ Code i'm using: //Reading Plist { NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSCachesDirectory, NSUserDomainMask, YES); NSString *plistPath = [[documentPaths lastObject] stringByAppendingPathComponent:@"myPlist.plist"]; NSFileManager *fMgr = [NSFileManager defaultManager]; if (![fMgr fileExistsAtPath:plistPath]) { plistPath = [[NSBundle mainBundle] pathForResource:@"myPlist" ofType:@"plist"]; } NSMutableArray *returnArr = [NSMutableArray arrayWithContentsOfFile:plistPath]; NSPredicate *predicate = [NSPredicate predicateWithFormat:@"isFav == YES"]; for (NSDictionary *sect in returnArr) { NSArray *arr = [sect objectForKey:@"Rows"]; [sect setValue:[arr filteredArrayUsingPredicate:predicate] forKey:@"Rows"]; } [self.tableView reloadData]; } //Refresh data button - (void) refreshTable:(id)sender { NSLog(@"plist read"); [self readPlist]; NSLog(@"refreshed plist:%@",[self readPlist]); [self.tableView reloadData]; } Does anyone know why the table is not updating?

  Read the article

• Android - overlay small check icon over specific image in gridview or change border

  - by oscar

  I've just asked a question about an hour ago, while waiting for replies, I've thought maybe I can achieve what I want differently. I was thinking of changing the image but it would be better if I could perhaps overlay something over the top of complete levels in the gridview i.e a small tick icon At the moment, when a level has been completed I am storing that with sharedpreferences So I have a gridView layout to display images that represent levels. Let's just say for this example I have 20 levels. When one level is complete is it possible to overlay the tick icon or somehow highlight the level image. Maybe change the border of the image?? Here are the image arrays I use int[] imageIDs = { R.drawable.one, R.drawable.two, R.drawable.three, R.drawable.four, R.drawable.five, R.drawable.six etc....... and then I have my code to set the images in gridView. Obviously there is more code in between. public View getView(int position, View convertView, ViewGroup parent) { ImageView imageView; if (convertView == null) { imageView = new ImageView(context); imageView.setLayoutParams(new GridView.LayoutParams(140, 140)); imageView.setScaleType(ImageView.ScaleType.CENTER_CROP); imageView.setPadding(5, 5, 5, 5); } else { imageView = (ImageView) convertView; } imageView.setImageResource(imageIDs[position]); return imageView; would it be possible to do any of the above, even the border method would be fine. Thanks for any help

  Read the article

• Play 2.0 RESTful request post-processing

  - by virtualeyes

  In regard to this question I am curious how one can do post-request REST processing a la (crude): def postProcessor[T](content: T) = { request match { case Accepts.Json() => asJson(content) case Accepts.Xml() => asXml(content) case _ => content } } overriding onRouteRequest in Global config does not appear to provide access to body of the response, so it would seem that Action composition is the way to go to intercept the response and do post-processing task(s). Question: is this a good idea, or is it better to do content-type casting directly within a controller (or other class) method where the type to cast is known? Currently I'm doing this kind of thing everywhere: toJson( i18n("account not found") ) toJson( Map('orderNum-> orderNum) ) while I'd like the toJson/toXml conversion to happen based on accepts header post-request.

  Read the article

• Hudson + Jboss AS 7.1 + Maven 3 Project Build Error

  - by Zehra Gül Çabuk

  I've wanted to prepare an environment that I'm able to build my project and run my tests on a integration server. So I've installed an Jboss application server 7.1 and deployed hudson.war to it. Then I've created a project to trigger "mvn clean install" and when I built it I've got following exception. [INFO] Using bundled Maven 3 installation [INFO] Checking Maven 3 installation environment [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn --help [INFO] Checking Maven 3 installation version [INFO] Detected Maven 3 installation version: 3.0.3 [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml [DEBUG] Waiting for connection on port: 37183 Apache Maven 3.0.3 (r1075438; 2011-02-28 19:31:09+0200) Maven home: /disk7/hudson_home/maven/slavebundle/bundled-maven Java version: 1.7.0_04, vendor: Oracle Corporation Java home: /usr/lib/jvm/jdk1.7.0_04/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux", version: "3.2.0-24-generic", arch: "amd64", family: "unix" [ERROR] o.h.m.e.DelegatingEventSpy - Init failed java.lang.NoClassDefFoundError: hudson/remoting/Channel at org.hudsonci.maven.eventspy.common.RemotingClient.open(RemotingClient.java:103) ~[maven3-eventspy-runtime.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.openChannel(RemotingEventSpy.java:86) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.init(RemotingEventSpy.java:114) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.DelegatingEventSpy.init(DelegatingEventSpy.java:128) ~[maven3-eventspy-3.0.jar:na] at org.apache.maven.eventspy.internal.EventSpyDispatcher.init(EventSpyDispatcher.java:84) [maven-core-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.container(MavenCli.java:403) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:191) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) [maven-embedder-3.0.3.jar:3.0.3] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[na:1.7.0_04] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) ~[na:1.7.0_04] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[na:1.7.0_04] at java.lang.reflect.Method.invoke(Method.java:601) ~[na:1.7.0_04] at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) [plexus-classworlds-2.4.jar:na] Caused by: java.lang.ClassNotFoundException: hudson.remoting.Channel at org.codehaus.plexus.classworlds.strategy.SelfFirstStrategy.loadClass(SelfFirstStrategy.java:50) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:244) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:230) ~[plexus-classworlds-2.4.jar:na] ... 16 common frames omitted [ERROR] ABORTED [ERROR] Failed to initialize [ERROR] Caused by: hudson/remoting/Channel [ERROR] Caused by: hudson.remoting.Channel [ERROR] Failure: java.net.SocketException: Connection reset FATAL: Connection reset java.net.SocketException: Connection reset at java.net.SocketInputStream.read(SocketInputStream.java:189) at java.net.SocketInputStream.read(SocketInputStream.java:121) at java.io.FilterInputStream.read(FilterInputStream.java:133) at java.io.BufferedInputStream.fill(BufferedInputStream.java:235) at java.io.BufferedInputStream.read(BufferedInputStream.java:254) at hudson.remoting.Channel.<init>(Channel.java:385) at hudson.remoting.Channel.<init>(Channel.java:347) at hudson.remoting.Channel.<init>(Channel.java:320) at hudson.remoting.Channel.<init>(Channel.java:315) at hudson.slaves.Channels$1.<init>(Channels.java:71) at hudson.slaves.Channels.forProcess(Channels.java:71) at org.hudsonci.maven.plugin.builder.internal.PerformBuild.doExecute(PerformBuild.java:174) at org.hudsonci.utils.tasks.PerformOperation.execute(PerformOperation.java:58) at org.hudsonci.maven.plugin.builder.MavenBuilder.perform(MavenBuilder.java:169) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:630) at hudson.model.Build$RunnerImpl.build(Build.java:175) at hudson.model.Build$RunnerImpl.doRun(Build.java:137) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:429) at hudson.model.Run.run(Run.java:1366) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) I want to point out the command which is tried to execute by hudson : /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml It tries to find "hudson-remoting-2.2.0.jar" to put it to build path but it searches it at the wrong place because when I look where the hudson-remoting jar I found it at /disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/hudson-remoting-2.2.0.jar for this build(not in contents). So how can I configure the hudson to force it looking at the right place for jars? Is there anyone has an idea? Thanks in advance.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >