Search Results

Search found 79 results on 4 pages for 'dma k'.

Page 1/4 | 1 2 3 4  | Next Page >

  • Does the DMA Buffer Size should be same as UART FIFO size?

    - by ddpd
    I have written a driver for a UART in omap4460 panda board running on Linux platform.I have enabled DMA in FIFO mode in UART.My user application transfers 100 bytes of data from user space to kernel buffer(DMA buffer). As soon as the DMA channel is enabled, data from DMA buffer is copied to FIFO which is then transmitted to TSR of UART.Since my FIFO size is 64bytes,only 64 bytes is transmitted to TSR. What should I do to transfer remaining bytes from DMA buffer to FIFO?/ IS there any overflow occuring?

    Read the article

  • Bad DMA/do_IRQ errors on suspend/resume, with occasional freezing

    - by Steve Kroon
    Every time I suspend or resume my laptop (Dell Latitude E6520, bought this year), I get 2 messages of the form displayed on the console just before shutting down/starting up: [ 407.107610] ehci_hcd 0000:00:1d.0: dma_pool_free buffer-128, f6f18000/36f18000 (bad dma) On occasion, I get a message of the form: [ 3753.979066] do_IRQ: 0.177 No irq handler for vector (irq -1) On occasion, my machine freezes with a flashing Caps Lock button when suspending, after which I need to do a hard shutdown. This never happened before the messages started appearing (a while back), and I think it never happens without a do_IRQ message appearing (although I'm not sure about that). [There's nothing in the owner's manual on a flashing Caps Lock button; apparently it may be a kernel panic if the scroll lock also flashes, but the laptop doesn't have a scroll lock light, and there's no message on the console saying kernel panic.] Are these bad DMA/do IRQ messages serious, and what can I do to investigate/troubleshoot them and the freezing? Edit: I've also now received the following error messages a few times: [246943.023908] JBD: I/O error detected when updating journal superblock for sdb1. [246943.023958] Buffer I/O error on device sdb1, logical block 0 [246943.023996] EXT3-fs (sdb1): I/O error while writing superblock Edit: Output of dmesg at http://pastebin.com/ra7MTQEj ; contents of /var/log/kern.log at http://pastebin.com/i6jf0Md9 Edit: the output of some smartctl (-a, -x, --log=error, --log=xerror) instructions is available at http://paste.ubuntu.com/1088488/ . Edit (31/8/2012): Output of dmesg|grep -i ehci available at http://paste.ubuntu.com/1177246/ .

    Read the article

  • Slow dvd burning/reading speeds: how to solve

    - by wouter205
    I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

    Read the article

  • Primary IDE Channel: Ultra DMA Mode 5 >> PIO Mode

    - by Wesley
    Hi, my netbook was having huge audio lag and just abnormally slow processing. After doing some searching on the internet, I found out that I needed to uninstall/reinstall the Primary IDE Channel found under the IDE controller section in the Device Manager. I would then set the Transfer Mode to DMA if available and everything would be great. For a period of time, I would see that "Ultra DMA Mode 5" was the current transfer mode, but every so often, it'd revert back to "PIO Mode", which is when it's really laggy. What can I do to prevent the Primary IDE Channel to revert from Ultra DMA Mode to PIO Mode? Also, my netbook has BSODed a few times when it is in PIO Mode, without any real explanation. I have a Samsung N120. Specs are as follows: http://www.samsung.com/ca/consumer/office/mobile-computing/netbook/NP-N120-KA01CA/index.idx?pagetype=prd_detail&tab=spec&fullspec=F. Only difference is that I have upgraded to 2.0 GB of DDR2 RAM. EDIT: For all who are looking for an answer to this problem, click the link in Kythos's answer and look at number 6 (Re-enable DMA using the Registry Editor). This always works for me now. If on reboot, you seem to only have a black screen after XP is loading, just wait... it is still loading and will show signs of life after 2-3 minutes.

    Read the article

  • Should I enable "Intel NIC DMA Channels"?

    - by javapowered
    I have HP DL360p Gen8 646902-xx1 I'm trying to optimize my config for low latency trading. Should I enable "Intel NIC DMA Channels"? Will that help/affect my system? From HP doc: Added a new ROM Based Setup Utility (RBSU) Advanced Performance Option menu that allows the user to enable Intel NIC DMA Channels (IOAT). This option is disabled by default. When enabled, certain networking devices may see an improvement in performance by utilizing Intel's DMA engine to offload network activity. Please consult documentation from the network adapter to determine if this feature is supported.

    Read the article

  • SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

    - by digby280
    I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Multi-word dma 2

    - by Streki
    Hi, after installation of XP MODE I have in device manager in IDE ATA/ATAPI controler on my SSD disk Multi-word dma 2 mode/same mode like XP mode BIOS/. I using AHCI mode in bios and w7. Its any choice to get back Ultra DMA 6 mode? Thanks for help.

    Read the article

  • Multi-word dma 2

    - by Streki
    Hi, after installation of XP MODE I have in device manager in IDE ATA/ATAPI controler on my SSD disk Multi-word dma 2 mode/same mode like XP mode BIOS/. I using AHCI mode in bios and w7. Its any choice to get back Ultra DMA 6 mode? Thanks for help.

    Read the article

  • Automatically disable devices to save power and mitigate DMA attack in Windows 7

    - by Martheen Cahya Paulo
    Some OEM include energy saving apps that can switch off certain devices such as webcam or optical drive. Is there any brand-agnostic app out there that can do it? If the list of disabled device is customizable, it would be useful too for mitigating DMA attack (disabling Firewire, PCMCIA, SDIO, Thunderbolt, etc). Even better if it can recognize lock/logoff event, to mimic OSX behavior in mitigating the DMA attack.

    Read the article

  • Enabling DMA in pc with windows 7

    - by Mugen
    I was checking my pc settings using AIDA64 (supposed to be the successor for Everest - it basically shows you detailed hardware you currently have). For my ATA hard disk it shows the setting for DMA as "supported, disabled". But when I checked the windows setting I see that it is actually enabled. How can I find out which is correct? And if its disabled what do I do to enable it? Thanks for your help. Here are some screenshots for this:

    Read the article

  • What happens after a packet is captured?

    - by Rayne
    Hi all, I've been reading about what happens after packets are captured by NICs, and the more I read, the more I'm confused. Firstly, I've read that traditionally, after a packet is captured by the NIC, it gets copied to a block of memory in the kernel space, then to the user space for whatever application that then works on the packet data. Then I read about DMA, where the NIC directly copies the packet into memory, bypassing the CPU. So is the NIC - kernel memory - User space memory flow still valid? Also, do most NIC (e.g. Myricom) use DMA to improve packet capture rates? Secondly, does RSS (Receive Side Scaling) work similarly in both Windows and Linux systems? I can only find detailed explanations on how RSS works in MSDN articles, where they talk about how RSS (and MSI-X) works on Windows Server 2008. But the same concept of RSS and MSI-X should still apply for linux systems, right? Thank you. Regards, Rayne

    Read the article

  • Organizations & Architecture UNISA Studies – Chap 7

    - by MarkPearl
    Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

    Read the article

  • Failing Sata HDD

    - by DaveCol
    I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

    Read the article

  • Disk failure is imminent Laptop Hard drive ~5 months old

    - by Drew
    There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

    Read the article

  • panic! apache2 cannot start due to unable to read error.log !

    - by vvvvvvv
    apache2 fails to start because it cannot open error.log I've checked the syslog, and found something troubling... Jan 20 02:58:18 unassigned sm-mta[3559]: o0FAD04C017861: to=<[email protected]>, delay=4+22:45:18, xdelay=00:06:18, mailer=esmtp, pri=63390823, relay=asdfa$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3939]: (root) CMD (if [ -x /usr/bin/vnstat ] && [ `ls /var/lib/vnstat/ | wc -l` -ge 1 ]; then /usr/bin/vnstat -u; f$ Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3944]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jan 20 03:00:01 unassigned /USR/SBIN/CRON[3949]: (www-data) CMD ([ -x /usr/lib/cgi-bin/awstats.pl -a -f /etc/awstats/awstats.conf -a -r /var/log/apache/acces$ Jan 20 03:02:48 unassigned kernel: [371919.642705] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:48 unassigned kernel: [371919.642754] ata3.00: BMDMA stat 0x24 Jan 20 03:02:48 unassigned kernel: [371919.642779] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:48 unassigned kernel: [371919.642780] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:48 unassigned kernel: [371919.642824] ata3.00: status: { DRDY ERR } Jan 20 03:02:48 unassigned kernel: [371919.657647] ata3.00: configured for UDMA/133 Jan 20 03:02:48 unassigned kernel: [371919.657661] ata3: EH complete Jan 20 03:02:50 unassigned kernel: [371921.857580] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:50 unassigned kernel: [371921.857620] ata3.00: BMDMA stat 0x24 Jan 20 03:02:50 unassigned kernel: [371921.857645] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:50 unassigned kernel: [371921.857646] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:50 unassigned kernel: [371921.857688] ata3.00: status: { DRDY ERR } Jan 20 03:02:50 unassigned kernel: [371921.881468] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371921.881479] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371924.081382] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:02:54 unassigned kernel: [371924.081417] ata3.00: BMDMA stat 0x24 Jan 20 03:02:54 unassigned kernel: [371924.081443] ata3.00: cmd 25/00:08:37:59:e2/00:00:42:00:00/e0 tag 0 dma 4096 in Jan 20 03:02:54 unassigned kernel: [371924.081444] res 51/01:00:37:59:e2/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:02:54 unassigned kernel: [371924.081487] ata3.00: status: { DRDY ERR } Jan 20 03:02:54 unassigned kernel: [371924.105252] ata3.00: configured for UDMA/133 Jan 20 03:02:54 unassigned kernel: [371924.105261] ata3: EH complete Jan 20 03:02:54 unassigned kernel: [371933.656925] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656941] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656944] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656956] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:02:54 unassigned kernel: [371933.656972] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB) Jan 20 03:02:54 unassigned kernel: [371933.656979] sd 2:0:0:0: [sda] Write Protect is off Jan 20 03:02:54 unassigned kernel: [371933.656982] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 20 03:02:54 unassigned kernel: [371933.656993] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 20 03:03:34 unassigned kernel: [371966.060069] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371971.776846] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371971.776871] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371971.776872] res 51/01:00:87:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371971.776914] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371971.800668] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371971.800687] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371974.157850] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371974.157885] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371974.157911] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371974.157912] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371974.157956] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371974.179773] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371974.179786] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371976.398570] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371976.398610] ata3.00: BMDMA stat 0x24 Jan 20 03:05:48 unassigned kernel: [371976.398635] ata3.00: cmd 25/00:18:87:10:ee/00:00:42:00:00/e0 tag 0 dma 12288 in Jan 20 03:05:48 unassigned kernel: [371976.398636] res 51/01:00:88:10:ee/01:00:42:00:00/e0 Emask 0x1 (device error) Jan 20 03:05:48 unassigned kernel: [371976.398678] ata3.00: status: { DRDY ERR } Jan 20 03:05:48 unassigned kernel: [371976.423477] ata3.00: configured for UDMA/133 Jan 20 03:05:48 unassigned kernel: [371976.423495] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK Jan 20 03:05:48 unassigned kernel: [371976.423498] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Jan 20 03:05:48 unassigned kernel: [371976.423501] Descriptor sense data with sense descriptors (in hex): Jan 20 03:05:48 unassigned kernel: [371976.423503] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Jan 20 03:05:48 unassigned kernel: [371976.423508] 42 ee 10 88 Jan 20 03:05:48 unassigned kernel: [371976.423510] sd 2:0:0:0: [sda] Add. Sense: Address mark not found for data field Jan 20 03:05:48 unassigned kernel: [371976.423515] end_request: I/O error, dev sda, sector 1122898056 Jan 20 03:05:48 unassigned kernel: [371976.423536] ata3: EH complete Jan 20 03:05:48 unassigned kernel: [371978.630504] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Jan 20 03:05:48 unassigned kernel: [371978.630547] ata3.00: BMDMA stat 0x24

    Read the article

  • Hard Disk DRDY error: is it a crash

    - by pranjal
    I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

    Read the article

  • How to read oom-killer syslog messages?

    - by Grant
    I have a Ubuntu 12.04 server which sometimes dies completely - no SSH, no ping, nothing until it is physically rebooted. After the reboot, I see in syslog that the oom-killer killed, well, pretty much everything. There's a lot of detailed memory usage information in them. How do I read these logs to see what caused the OOM issue? The server has far more memory than it needs, so it shouldn't be running out of memory. Oct 25 07:28:04 nldedip4k031 kernel: [87946.529511] oom_kill_process: 9 callbacks suppressed Oct 25 07:28:04 nldedip4k031 kernel: [87946.529514] irqbalance invoked oom-killer: gfp_mask=0x80d0, order=0, oom_adj=0, oom_score_adj=0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529516] irqbalance cpuset=/ mems_allowed=0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529518] Pid: 948, comm: irqbalance Not tainted 3.2.0-55-generic-pae #85-Ubuntu Oct 25 07:28:04 nldedip4k031 kernel: [87946.529519] Call Trace: Oct 25 07:28:04 nldedip4k031 kernel: [87946.529525] [] dump_header.isra.6+0x85/0xc0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529528] [] oom_kill_process+0x5c/0x80 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529530] [] out_of_memory+0xc5/0x1c0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529532] [] __alloc_pages_nodemask+0x72c/0x740 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529535] [] __get_free_pages+0x1c/0x30 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529537] [] get_zeroed_page+0x12/0x20 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529541] [] fill_read_buffer.isra.8+0xaa/0xd0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529543] [] sysfs_read_file+0x7d/0x90 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529546] [] vfs_read+0x8c/0x160 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529548] [] ? fill_read_buffer.isra.8+0xd0/0xd0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529550] [] sys_read+0x3d/0x70 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529554] [] sysenter_do_call+0x12/0x28 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529555] Mem-Info: Oct 25 07:28:04 nldedip4k031 kernel: [87946.529556] DMA per-cpu: Oct 25 07:28:04 nldedip4k031 kernel: [87946.529557] CPU 0: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529558] CPU 1: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529560] CPU 2: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529561] CPU 3: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529562] CPU 4: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529563] CPU 5: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529564] CPU 6: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529565] CPU 7: hi: 0, btch: 1 usd: 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529566] Normal per-cpu: Oct 25 07:28:04 nldedip4k031 kernel: [87946.529567] CPU 0: hi: 186, btch: 31 usd: 179 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529568] CPU 1: hi: 186, btch: 31 usd: 182 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529569] CPU 2: hi: 186, btch: 31 usd: 132 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529570] CPU 3: hi: 186, btch: 31 usd: 175 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529571] CPU 4: hi: 186, btch: 31 usd: 91 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529572] CPU 5: hi: 186, btch: 31 usd: 173 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529573] CPU 6: hi: 186, btch: 31 usd: 159 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529574] CPU 7: hi: 186, btch: 31 usd: 164 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529575] HighMem per-cpu: Oct 25 07:28:04 nldedip4k031 kernel: [87946.529576] CPU 0: hi: 186, btch: 31 usd: 165 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529577] CPU 1: hi: 186, btch: 31 usd: 183 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529578] CPU 2: hi: 186, btch: 31 usd: 185 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529579] CPU 3: hi: 186, btch: 31 usd: 138 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529580] CPU 4: hi: 186, btch: 31 usd: 155 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529581] CPU 5: hi: 186, btch: 31 usd: 104 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529582] CPU 6: hi: 186, btch: 31 usd: 133 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529583] CPU 7: hi: 186, btch: 31 usd: 170 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529586] active_anon:5523 inactive_anon:354 isolated_anon:0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529586] active_file:2815 inactive_file:6849119 isolated_file:0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529587] unevictable:0 dirty:449 writeback:10 unstable:0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529587] free:1304125 slab_reclaimable:104672 slab_unreclaimable:3419 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529588] mapped:2661 shmem:138 pagetables:313 bounce:0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529591] DMA free:4252kB min:780kB low:972kB high:1168kB active_anon:0kB inactive_anon:0kB active_file:4kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15756kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:11564kB slab_unreclaimable:4kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:1 all_unreclaimable? yes Oct 25 07:28:04 nldedip4k031 kernel: [87946.529594] lowmem_reserve[]: 0 869 32460 32460 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529599] Normal free:44052kB min:44216kB low:55268kB high:66324kB active_anon:0kB inactive_anon:0kB active_file:616kB inactive_file:568kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:890008kB mlocked:0kB dirty:0kB writeback:0kB mapped:4kB shmem:0kB slab_reclaimable:407124kB slab_unreclaimable:13672kB kernel_stack:992kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:2083 all_unreclaimable? yes Oct 25 07:28:04 nldedip4k031 kernel: [87946.529602] lowmem_reserve[]: 0 0 252733 252733 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529606] HighMem free:5168196kB min:512kB low:402312kB high:804112kB active_anon:22092kB inactive_anon:1416kB active_file:10640kB inactive_file:27395920kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:32349872kB mlocked:0kB dirty:1796kB writeback:40kB mapped:10640kB shmem:552kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:1252kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 25 07:28:04 nldedip4k031 kernel: [87946.529609] lowmem_reserve[]: 0 0 0 0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529611] DMA: 6*4kB 6*8kB 6*16kB 5*32kB 5*64kB 4*128kB 2*256kB 1*512kB 0*1024kB 1*2048kB 0*4096kB = 4232kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.529616] Normal: 297*4kB 180*8kB 119*16kB 73*32kB 67*64kB 47*128kB 35*256kB 13*512kB 5*1024kB 1*2048kB 1*4096kB = 44052kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.529622] HighMem: 1*4kB 6*8kB 27*16kB 11*32kB 2*64kB 1*128kB 0*256kB 0*512kB 4*1024kB 1*2048kB 1260*4096kB = 5168196kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.529627] 6852076 total pagecache pages Oct 25 07:28:04 nldedip4k031 kernel: [87946.529628] 0 pages in swap cache Oct 25 07:28:04 nldedip4k031 kernel: [87946.529629] Swap cache stats: add 0, delete 0, find 0/0 Oct 25 07:28:04 nldedip4k031 kernel: [87946.529630] Free swap = 3998716kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.529631] Total swap = 3998716kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.571914] 8437743 pages RAM Oct 25 07:28:04 nldedip4k031 kernel: [87946.571916] 8209409 pages HighMem Oct 25 07:28:04 nldedip4k031 kernel: [87946.571917] 159556 pages reserved Oct 25 07:28:04 nldedip4k031 kernel: [87946.571917] 6862034 pages shared Oct 25 07:28:04 nldedip4k031 kernel: [87946.571918] 123540 pages non-shared Oct 25 07:28:04 nldedip4k031 kernel: [87946.571919] [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name Oct 25 07:28:04 nldedip4k031 kernel: [87946.571927] [ 421] 0 421 709 152 3 0 0 upstart-udev-br Oct 25 07:28:04 nldedip4k031 kernel: [87946.571929] [ 429] 0 429 773 326 5 -17 -1000 udevd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571931] [ 567] 0 567 772 224 4 -17 -1000 udevd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571932] [ 568] 0 568 772 231 7 -17 -1000 udevd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571934] [ 764] 0 764 712 103 1 0 0 upstart-socket- Oct 25 07:28:04 nldedip4k031 kernel: [87946.571936] [ 772] 103 772 815 164 5 0 0 dbus-daemon Oct 25 07:28:04 nldedip4k031 kernel: [87946.571938] [ 785] 0 785 1671 600 1 -17 -1000 sshd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571940] [ 809] 101 809 7766 380 1 0 0 rsyslogd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571942] [ 869] 0 869 1158 213 3 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571943] [ 873] 0 873 1158 214 6 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571945] [ 911] 0 911 1158 215 3 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571947] [ 912] 0 912 1158 214 2 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571949] [ 914] 0 914 1158 213 1 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571950] [ 916] 0 916 618 86 1 0 0 atd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571952] [ 917] 0 917 655 226 3 0 0 cron Oct 25 07:28:04 nldedip4k031 kernel: [87946.571954] [ 948] 0 948 902 159 3 0 0 irqbalance Oct 25 07:28:04 nldedip4k031 kernel: [87946.571956] [ 993] 0 993 1145 363 3 0 0 master Oct 25 07:28:04 nldedip4k031 kernel: [87946.571957] [ 1002] 104 1002 1162 333 1 0 0 qmgr Oct 25 07:28:04 nldedip4k031 kernel: [87946.571959] [ 1016] 0 1016 730 149 2 0 0 mdadm Oct 25 07:28:04 nldedip4k031 kernel: [87946.571961] [ 1057] 0 1057 6066 2160 3 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571963] [ 1086] 0 1086 1158 213 3 0 0 getty Oct 25 07:28:04 nldedip4k031 kernel: [87946.571965] [ 1088] 33 1088 6191 1517 0 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571967] [ 1089] 33 1089 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571969] [ 1090] 33 1090 6175 1451 3 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571971] [ 1091] 33 1091 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571972] [ 1092] 33 1092 6191 1451 0 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571974] [ 1109] 33 1109 6191 1517 0 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571976] [ 1151] 33 1151 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:04 nldedip4k031 kernel: [87946.571978] [ 1201] 104 1201 1803 652 1 0 0 tlsmgr Oct 25 07:28:04 nldedip4k031 kernel: [87946.571980] [ 2475] 0 2475 2435 812 0 0 0 sshd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571982] [ 2494] 0 2494 1745 839 1 0 0 bash Oct 25 07:28:04 nldedip4k031 kernel: [87946.571984] [ 2573] 0 2573 3394 1689 0 0 0 sshd Oct 25 07:28:04 nldedip4k031 kernel: [87946.571986] [ 2589] 0 2589 5014 457 3 0 0 rsync Oct 25 07:28:04 nldedip4k031 kernel: [87946.571988] [ 2590] 0 2590 7970 522 1 0 0 rsync Oct 25 07:28:04 nldedip4k031 kernel: [87946.571990] [ 2652] 104 2652 1150 326 5 0 0 pickup Oct 25 07:28:04 nldedip4k031 kernel: [87946.571992] Out of memory: Kill process 421 (upstart-udev-br) score 1 or sacrifice child Oct 25 07:28:04 nldedip4k031 kernel: [87946.572407] Killed process 421 (upstart-udev-br) total-vm:2836kB, anon-rss:156kB, file-rss:452kB Oct 25 07:28:04 nldedip4k031 kernel: [87946.573107] init: upstart-udev-bridge main process (421) killed by KILL signal Oct 25 07:28:04 nldedip4k031 kernel: [87946.573126] init: upstart-udev-bridge main process ended, respawning Oct 25 07:28:34 nldedip4k031 kernel: [87976.461570] irqbalance invoked oom-killer: gfp_mask=0x80d0, order=0, oom_adj=0, oom_score_adj=0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461573] irqbalance cpuset=/ mems_allowed=0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461576] Pid: 948, comm: irqbalance Not tainted 3.2.0-55-generic-pae #85-Ubuntu Oct 25 07:28:34 nldedip4k031 kernel: [87976.461578] Call Trace: Oct 25 07:28:34 nldedip4k031 kernel: [87976.461585] [] dump_header.isra.6+0x85/0xc0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461588] [] oom_kill_process+0x5c/0x80 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461591] [] out_of_memory+0xc5/0x1c0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461595] [] __alloc_pages_nodemask+0x72c/0x740 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461599] [] __get_free_pages+0x1c/0x30 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461602] [] get_zeroed_page+0x12/0x20 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461606] [] fill_read_buffer.isra.8+0xaa/0xd0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461609] [] sysfs_read_file+0x7d/0x90 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461613] [] vfs_read+0x8c/0x160 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461616] [] ? fill_read_buffer.isra.8+0xd0/0xd0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461619] [] sys_read+0x3d/0x70 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461624] [] sysenter_do_call+0x12/0x28 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461626] Mem-Info: Oct 25 07:28:34 nldedip4k031 kernel: [87976.461628] DMA per-cpu: Oct 25 07:28:34 nldedip4k031 kernel: [87976.461629] CPU 0: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461631] CPU 1: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461633] CPU 2: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461634] CPU 3: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461636] CPU 4: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461638] CPU 5: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461639] CPU 6: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461641] CPU 7: hi: 0, btch: 1 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461642] Normal per-cpu: Oct 25 07:28:34 nldedip4k031 kernel: [87976.461644] CPU 0: hi: 186, btch: 31 usd: 61 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461646] CPU 1: hi: 186, btch: 31 usd: 49 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461647] CPU 2: hi: 186, btch: 31 usd: 8 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461649] CPU 3: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461651] CPU 4: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461652] CPU 5: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461654] CPU 6: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461656] CPU 7: hi: 186, btch: 31 usd: 30 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461657] HighMem per-cpu: Oct 25 07:28:34 nldedip4k031 kernel: [87976.461658] CPU 0: hi: 186, btch: 31 usd: 4 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461660] CPU 1: hi: 186, btch: 31 usd: 204 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461662] CPU 2: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461663] CPU 3: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461665] CPU 4: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461667] CPU 5: hi: 186, btch: 31 usd: 31 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461668] CPU 6: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461670] CPU 7: hi: 186, btch: 31 usd: 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461674] active_anon:5441 inactive_anon:412 isolated_anon:0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461674] active_file:2668 inactive_file:6922842 isolated_file:0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461675] unevictable:0 dirty:836 writeback:0 unstable:0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461676] free:1231664 slab_reclaimable:105781 slab_unreclaimable:3399 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461677] mapped:2649 shmem:138 pagetables:313 bounce:0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461682] DMA free:4248kB min:780kB low:972kB high:1168kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:4kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15756kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:11560kB slab_unreclaimable:4kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:5687 all_unreclaimable? yes Oct 25 07:28:34 nldedip4k031 kernel: [87976.461686] lowmem_reserve[]: 0 869 32460 32460 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461693] Normal free:44184kB min:44216kB low:55268kB high:66324kB active_anon:0kB inactive_anon:0kB active_file:20kB inactive_file:1096kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:890008kB mlocked:0kB dirty:4kB writeback:0kB mapped:4kB shmem:0kB slab_reclaimable:411564kB slab_unreclaimable:13592kB kernel_stack:992kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:1816 all_unreclaimable? yes Oct 25 07:28:34 nldedip4k031 kernel: [87976.461697] lowmem_reserve[]: 0 0 252733 252733 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461703] HighMem free:4878224kB min:512kB low:402312kB high:804112kB active_anon:21764kB inactive_anon:1648kB active_file:10652kB inactive_file:27690268kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:32349872kB mlocked:0kB dirty:3340kB writeback:0kB mapped:10592kB shmem:552kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:1252kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 25 07:28:34 nldedip4k031 kernel: [87976.461708] lowmem_reserve[]: 0 0 0 0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461711] DMA: 8*4kB 7*8kB 6*16kB 5*32kB 5*64kB 4*128kB 2*256kB 1*512kB 0*1024kB 1*2048kB 0*4096kB = 4248kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.461719] Normal: 272*4kB 178*8kB 76*16kB 52*32kB 42*64kB 36*128kB 23*256kB 20*512kB 7*1024kB 2*2048kB 1*4096kB = 44176kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.461727] HighMem: 1*4kB 45*8kB 31*16kB 24*32kB 5*64kB 3*128kB 1*256kB 2*512kB 4*1024kB 2*2048kB 1188*4096kB = 4877852kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.461736] 6925679 total pagecache pages Oct 25 07:28:34 nldedip4k031 kernel: [87976.461737] 0 pages in swap cache Oct 25 07:28:34 nldedip4k031 kernel: [87976.461739] Swap cache stats: add 0, delete 0, find 0/0 Oct 25 07:28:34 nldedip4k031 kernel: [87976.461740] Free swap = 3998716kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.461741] Total swap = 3998716kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.524951] 8437743 pages RAM Oct 25 07:28:34 nldedip4k031 kernel: [87976.524953] 8209409 pages HighMem Oct 25 07:28:34 nldedip4k031 kernel: [87976.524954] 159556 pages reserved Oct 25 07:28:34 nldedip4k031 kernel: [87976.524955] 6936141 pages shared Oct 25 07:28:34 nldedip4k031 kernel: [87976.524956] 124602 pages non-shared Oct 25 07:28:34 nldedip4k031 kernel: [87976.524957] [ pid ] uid tgid total_vm rss cpu oom_adj oom_score_adj name Oct 25 07:28:34 nldedip4k031 kernel: [87976.524966] [ 429] 0 429 773 326 5 -17 -1000 udevd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524968] [ 567] 0 567 772 224 4 -17 -1000 udevd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524971] [ 568] 0 568 772 231 7 -17 -1000 udevd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524973] [ 764] 0 764 712 103 3 0 0 upstart-socket- Oct 25 07:28:34 nldedip4k031 kernel: [87976.524976] [ 772] 103 772 815 164 2 0 0 dbus-daemon Oct 25 07:28:34 nldedip4k031 kernel: [87976.524979] [ 785] 0 785 1671 600 1 -17 -1000 sshd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524981] [ 809] 101 809 7766 380 1 0 0 rsyslogd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524983] [ 869] 0 869 1158 213 3 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.524986] [ 873] 0 873 1158 214 6 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.524988] [ 911] 0 911 1158 215 3 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.524990] [ 912] 0 912 1158 214 2 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.524992] [ 914] 0 914 1158 213 1 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.524995] [ 916] 0 916 618 86 1 0 0 atd Oct 25 07:28:34 nldedip4k031 kernel: [87976.524997] [ 917] 0 917 655 226 3 0 0 cron Oct 25 07:28:34 nldedip4k031 kernel: [87976.524999] [ 948] 0 948 902 159 5 0 0 irqbalance Oct 25 07:28:34 nldedip4k031 kernel: [87976.525002] [ 993] 0 993 1145 363 3 0 0 master Oct 25 07:28:34 nldedip4k031 kernel: [87976.525004] [ 1002] 104 1002 1162 333 1 0 0 qmgr Oct 25 07:28:34 nldedip4k031 kernel: [87976.525007] [ 1016] 0 1016 730 149 2 0 0 mdadm Oct 25 07:28:34 nldedip4k031 kernel: [87976.525009] [ 1057] 0 1057 6066 2160 3 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525012] [ 1086] 0 1086 1158 213 3 0 0 getty Oct 25 07:28:34 nldedip4k031 kernel: [87976.525014] [ 1088] 33 1088 6191 1517 0 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525017] [ 1089] 33 1089 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525019] [ 1090] 33 1090 6175 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525021] [ 1091] 33 1091 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525024] [ 1092] 33 1092 6191 1451 0 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525026] [ 1109] 33 1109 6191 1517 0 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525029] [ 1151] 33 1151 6191 1451 1 0 0 /usr/sbin/apach Oct 25 07:28:34 nldedip4k031 kernel: [87976.525031] [ 1201] 104 1201 1803 652 1 0 0 tlsmgr Oct 25 07:28:34 nldedip4k031 kernel: [87976.525033] [ 2475] 0 2475 2435 812 0 0 0 sshd Oct 25 07:28:34 nldedip4k031 kernel: [87976.525036] [ 2494] 0 2494 1745 839 1 0 0 bash Oct 25 07:28:34 nldedip4k031 kernel: [87976.525038] [ 2573] 0 2573 3394 1689 3 0 0 sshd Oct 25 07:28:34 nldedip4k031 kernel: [87976.525040] [ 2589] 0 2589 5014 457 3 0 0 rsync Oct 25 07:28:34 nldedip4k031 kernel: [87976.525043] [ 2590] 0 2590 7970 522 1 0 0 rsync Oct 25 07:28:34 nldedip4k031 kernel: [87976.525045] [ 2652] 104 2652 1150 326 5 0 0 pickup Oct 25 07:28:34 nldedip4k031 kernel: [87976.525048] [ 2847] 0 2847 709 89 0 0 0 upstart-udev-br Oct 25 07:28:34 nldedip4k031 kernel: [87976.525050] Out of memory: Kill process 764 (upstart-socket-) score 1 or sacrifice child Oct 25 07:28:34 nldedip4k031 kernel: [87976.525484] Killed process 764 (upstart-socket-) total-vm:2848kB, anon-rss:204kB, file-rss:208kB Oct 25 07:28:34 nldedip4k031 kernel: [87976.526161] init: upstart-socket-bridge main process (764) killed by KILL signal Oct 25 07:28:34 nldedip4k031 kernel: [87976.526180] init: upstart-socket-bridge main process ended, respawning Oct 25 07:28:44 nldedip4k031 kernel: [87986.439671] irqbalance invoked oom-killer: gfp_mask=0x80d0, order=0, oom_adj=0, oom_score_adj=0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439674] irqbalance cpuset=/ mems_allowed=0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439676] Pid: 948, comm: irqbalance Not tainted 3.2.0-55-generic-pae #85-Ubuntu Oct 25 07:28:44 nldedip4k031 kernel: [87986.439678] Call Trace: Oct 25 07:28:44 nldedip4k031 kernel: [87986.439684] [] dump_header.isra.6+0x85/0xc0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439686] [] oom_kill_process+0x5c/0x80 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439688] [] out_of_memory+0xc5/0x1c0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439691] [] __alloc_pages_nodemask+0x72c/0x740 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439694] [] __get_free_pages+0x1c/0x30 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439696] [] get_zeroed_page+0x12/0x20 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439699] [] fill_read_buffer.isra.8+0xaa/0xd0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439702] [] sysfs_read_file+0x7d/0x90 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439704] [] vfs_read+0x8c/0x160 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439707] [] ? fill_read_buffer.isra.8+0xd0/0xd0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439709] [] sys_read+0x3d/0x70 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439712] [] sysenter_do_call+0x12/0x28 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439714] Mem-Info: Oct 25 07:28:44 nldedip4k031 kernel: [87986.439714] DMA per-cpu: Oct 25 07:28:44 nldedip4k031 kernel: [87986.439716] CPU 0: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439717] CPU 1: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439718] CPU 2: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439719] CPU 3: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439720] CPU 4: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439721] CPU 5: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439722] CPU 6: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439723] CPU 7: hi: 0, btch: 1 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439724] Normal per-cpu: Oct 25 07:28:44 nldedip4k031 kernel: [87986.439725] CPU 0: hi: 186, btch: 31 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439726] CPU 1: hi: 186, btch: 31 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439727] CPU 2: hi: 186, btch: 31 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439728] CPU 3: hi: 186, btch: 31 usd: 0 Oct 25 07:28:44 nldedip4k031 kernel: [87986.439729] CPU 4: hi: 186, btch: 31 usd: 0 Oct 25 07:33:48 nldedip4k031 kernel: imklog 5.8.6, log source = /proc/kmsg started. Oct 25 07:33:48 nldedip4k031 rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="2880" x-info="http://www.rsyslog.com"] start Oct 25 07:33:48 nldedip4k031 rsyslogd: rsyslogd's groupid changed to 103 Oct 25 07:33:48 nldedip4k031 rsyslogd: rsyslogd's userid changed to 101 Oct 25 07:33:48 nldedip4k031 rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ]

    Read the article

  • ath9k driver does not weak up

    - by shantanu
    I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

    Read the article

  • Disk failing on dell mini, are there diagnostic tools?

    - by John Lawrence Aspden
    Hi, my dell mini 10v running Ubuntu 10.10 runs ok for hours, but then will suddenly slow down drastically. Switching to a console shows lots of error messages, which also get into /var/log/syslog. These errors happen every couple of seconds. I'm figuring that the disk is failing, but is there anyway to be sure, and can laptop disks be replaced easily? Mar 20 11:08:12 dell-mini kernel: [ 2476.378774] ata1.00: status: { DRDY ERR } Mar 20 11:08:12 dell-mini kernel: [ 2476.378785] ata1.00: error: { UNC } Mar 20 11:08:12 dell-mini kernel: [ 2476.449841] ata1.00: configured for UDMA/133 Mar 20 11:08:12 dell-mini kernel: [ 2476.449887] ata1: EH complete Mar 20 11:08:14 dell-mini kernel: [ 2478.777754] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 20 11:08:14 dell-mini kernel: [ 2478.777976] ata1.00: BMDMA stat 0x24 Mar 20 11:08:14 dell-mini kernel: [ 2478.778059] ata1.00: failed command: READ DMA Mar 20 11:08:14 dell-mini kernel: [ 2478.778162] ata1.00: cmd c8/00:08:43:3b:97/00:00:00:00:00/e0 tag 0 dma 4096 in Mar 20 11:08:14 dell-mini kernel: [ 2478.778166] res 51/40:00:47:3b:97/00:00:00:00:00/00 Emask 0x9 (media error)

    Read the article

  • Kinetic Scroll in Maverick

    - by Shoaib
    I have Sony VAIO FW 230J laptop. I was using Lucid and upgraded my system to Maverick beta in September 2010. Although there were few issues with beta release on my system although I did not felt myself in any deadlock. The most notable experience on my ubuntu was the smooth and kinetic scrolling and very sensitive touch pad experience with finer control that was oddly normal in previous releases and even on windows 7 currently. Definitely this release of ubuntu is improved for touch UI experience. I believe that this is magic of 10.10. For my official system I waited until the final release was out. After installing (upgrading) official system to Maverick I am not feeling the same smooth and kinetic scroll experience. My laptop has Graphics: Intel DMA-X4500MHD while my official desktop has Graphics: Intel DMA-X4500HD Do I need to install or update some software package to have similar kinetic scroll experience?

    Read the article

  • xen domUs crashes or unavailability

    - by Rush
    I've xen server with 8 domU. Server is Xeon E31270 with 16gb ram. I think it is enough for 8 machines. Sometimes domU's crashes and i can't figure out the reason. After crash i can connect to console and there is somthing like this: Oct 8 22:20:49 server kernel: [30892.320780] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.320790] Node 0 DMA: 10*4kB 3*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8080kB Oct 8 22:20:49 server kernel: [30892.320817] Node 0 DMA32: 648*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5760kB Oct 8 22:20:49 server kernel: [30892.320842] 1491 total pagecache pages Oct 8 22:20:49 server kernel: [30892.320847] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.320852] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.320858] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.320862] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.324024] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.324024] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.324024] 424467 pages shared Oct 8 22:20:49 server kernel: [30892.324024] 503538 pages non-shared Oct 8 22:20:49 server kernel: [30892.330308] apache2 invoked oom-killer: gfp_mask=0x200da, order=0, oom_adj=0 Oct 8 22:20:49 server kernel: [30892.330322] apache2 cpuset=/ mems_allowed=0 Oct 8 22:20:49 server kernel: [30892.330330] Pid: 23938, comm: apache2 Not tainted 2.6.32-5-xen-amd64 #1 Oct 8 22:20:49 server kernel: [30892.330337] Call Trace: Oct 8 22:20:49 server kernel: [30892.330349] [<ffffffff810b7180>] ? oom_kill_process+0x7f/0x23f Oct 8 22:20:49 server kernel: [30892.330358] [<ffffffff810b76a4>] ? __out_of_memory+0x12a/0x141 Oct 8 22:20:49 server kernel: [30892.330367] [<ffffffff810b77fb>] ? out_of_memory+0x140/0x172 Oct 8 22:20:49 server kernel: [30892.330376] [<ffffffff810bb59c>] ? __alloc_pages_nodemask+0x4e5/0x5f5 Oct 8 22:20:49 server kernel: [30892.330385] [<ffffffff810cc224>] ? do_wp_page+0x386/0x707 Oct 8 22:20:49 server kernel: [30892.330395] [<ffffffff8100c3a5>] ? __raw_callee_save_xen_pud_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330404] [<ffffffff8100c369>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e Oct 8 22:20:49 server kernel: [30892.330412] [<ffffffff810cdfc7>] ? handle_mm_fault+0x7aa/0x80f Oct 8 22:20:49 server kernel: [30892.330422] [<ffffffff8130f906>] ? do_page_fault+0x2e0/0x2fc Oct 8 22:20:49 server kernel: [30892.330433] [<ffffffff8130d7a5>] ? page_fault+0x25/0x30 Oct 8 22:20:49 server kernel: [30892.330439] Mem-Info: Oct 8 22:20:49 server kernel: [30892.330443] Node 0 DMA per-cpu: Oct 8 22:20:49 server kernel: [30892.330450] CPU 0: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330463] CPU 1: hi: 0, btch: 1 usd: 0 Oct 8 22:20:49 server kernel: [30892.330466] Node 0 DMA32 per-cpu: Oct 8 22:20:49 server kernel: [30892.330469] CPU 0: hi: 186, btch: 31 usd: 0 Oct 8 22:20:49 server kernel: [30892.330472] CPU 1: hi: 186, btch: 31 usd: 60 Oct 8 22:20:49 server kernel: [30892.330476] active_anon:342076 inactive_anon:115398 isolated_anon:0 Oct 8 22:20:49 server kernel: [30892.330477] active_file:268 inactive_file:481 isolated_file:0 Oct 8 22:20:49 server kernel: [30892.330477] unevictable:1125 dirty:2 writeback:13 unstable:0 Oct 8 22:20:49 server kernel: [30892.330478] free:3410 slab_reclaimable:1718 slab_unreclaimable:6946 Oct 8 22:20:49 server kernel: [30892.330478] mapped:899 shmem:113 pagetables:35697 bounce:0 Oct 8 22:20:49 server kernel: [30892.330502] Node 0 DMA free:8036kB min:32kB low:40kB high:48kB active_anon:1144kB inactive_anon:1268kB active_file:8kB inactive_file:8kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:11792kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:224kB kernel_stack:16kB pagetables:1228kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330518] lowmem_reserve[]: 0 2004 2004 2004 Oct 8 22:20:49 server kernel: [30892.330523] Node 0 DMA32 free:5604kB min:5708kB low:7132kB high:8560kB active_anon:1367160kB inactive_anon:460324kB active_file:1064kB inactive_file:1916kB unevictable:4500kB isolated(anon):0kB isolated(file):0kB present:2052320kB mlocked:4500kB dirty:8kB writeback:52kB mapped:3600kB shmem:452kB slab_reclaimable:6872kB slab_unreclaimable:27560kB kernel_stack:3528kB pagetables:141560kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:992 all_unreclaimable? no Oct 8 22:20:49 server kernel: [30892.330539] lowmem_reserve[]: 0 0 0 0 Oct 8 22:20:49 server kernel: [30892.330544] Node 0 DMA: 1*4kB 2*8kB 13*16kB 10*32kB 7*64kB 3*128kB 2*256kB 2*512kB 1*1024kB 2*2048kB 0*4096kB = 8036kB Oct 8 22:20:49 server kernel: [30892.330579] Node 0 DMA32: 609*4kB 2*8kB 1*16kB 0*32kB 1*64kB 0*128kB 0*256kB 0*512kB 1*1024kB 1*2048kB 0*4096kB = 5604kB Oct 8 22:20:49 server kernel: [30892.330605] 1522 total pagecache pages Oct 8 22:20:49 server kernel: [30892.330610] 0 pages in swap cache Oct 8 22:20:49 server kernel: [30892.330615] Swap cache stats: add 0, delete 0, find 0/0 Oct 8 22:20:49 server kernel: [30892.330621] Free swap = 0kB Oct 8 22:20:49 server kernel: [30892.330625] Total swap = 0kB Oct 8 22:20:49 server kernel: [30892.333018] 524288 pages RAM Oct 8 22:20:49 server kernel: [30892.333018] 11010 pages reserved Oct 8 22:20:49 server kernel: [30892.333018] 424367 pages shared Oct 8 22:20:49 server kernel: [30892.333018] 503658 pages non-shared Seems like there isn't enough memory for this domU. But there is no any memory problems reported in munin monitoring: As you see system uses around 0.2G and 1G is available. So my question is: Is it xen specific problem, that real memory usage and memory usage that shows munin are different (I've never seen such problems oh real hardware machines)? Or maybe it is just monitoring problem, that can't catch moment when there is unusual high load and domU go down? And how I can to defeat this problem? it is really annoying to catch messages in e-mail that domU went down. Btw, such situation was when domU had 2G memory.

    Read the article

  • CUDA & MSI GT60 with Optimus enabled GTX670M?

    - by user1076693
    I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

    Read the article

  • How do you setup the driver for a Philips based TV capture card?

    - by user8270
    Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección

    Read the article

1 2 3 4  | Next Page >