Search Results

Search found 224 results on 9 pages for 'dust'.

Page 1/9 | 1 2 3 4 5 6 7 8 9  | Next Page >

  • How do I clean a computer from dust?

    - by Jonas
    As computers become faster and generate more heat it gets more important to have good ventilation, but that also increases the amount of dust sticking to the components of the computer. It's of course better to make sure the computer never gets dusty by vacuum cleaning around it (not in it) frequently. But what to do if it's already to late? I've heard that vacuum cleaning the computer itself is very bad, since it can cause static electricity that hurts the computer. So, Does anyone have any tips for how to remove dust from your computer?

    Read the article

  • How do I clean dust from a computer?

    - by Jonas
    As computers become faster and generate more heat it gets more important to have good ventilation, but that also increases the amount of dust sticking to the components of the computer. It's of course better to make sure the computer never gets dusty by vacuum cleaning around it (not in it) frequently. But what to do if it's already to late? I've heard that vacuum cleaning the computer itself is very bad, since it can cause static electricity that hurts the computer. So, Does anyone have any tips for how to remove dust from your computer?

    Read the article

  • Prototype Fanless Heatsink Is Silent and Dust-Immune

    - by Jason Fitzpatrick
    What does this chip cooler do that your’s doesn’t? Run 30 times more efficiently, nearly silently, and repel any dust that settles on it, for starters. Check out the video to see it in action. Although the video is a bit dry the heatsink in action is pretty impressive–nearly silent? repels dust? radically more efficient? Our only complaint is we can’t slap one on a test machine right this minute. [via Extreme Tech] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Can Dust Actually Damage My Computer?

    - by Jason Fitzpatrick
    Thousands of hours per year of fan-driven air movement combined with electrostatic charges make computers veritable dust magnets. Is all that dust simply a nuisance or is it actually harmful? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It?

    Read the article

  • How would you measure the amount of atmospheric dust in a server room?

    - by Tom O'Connor
    We've been advised by our tape library vendor that one of the reasons we might be seeing lots of errors is if our server room is particularly dusty. It doesn't look dusty, but that's not to say it's not there. We've got an environment sensor cluster which measures Temperature, Airflow and Relative Humidity. I should probably point out that the low-hanging fruit solution I came up with is to use Sellotape (scotch tape) in a loop, one side stuck to the server cabinet, the other side free-hanging. I've also put a couple of other tape loops by the exit and intake fans of the hardware (not blocking airflow, naturally). How can we (electronically, ideally) measure dust levels?

    Read the article

  • What is a long-term strategy to deal with CPU fan dust in my home office?

    - by PaulG
    There are numerous discussions of CPU overheating and how sometimes this can be corrected by removing the dust from the CPU fan. I have read many of these, but I can't find anyone expressing a long-term strategy to deal with this problem. There are some suggestions here, for example, about how often the inside of the computer should be dusted. But I find this generally unsatisfactory. As it stands, in my rather dusty house (heated by a wood stove, with no central air circulation), I need to vacuum out the CPU fan every 3 to 4 months. At high CPU load, this can make a difference between 65C and 100C. I'm tired of hauling out the vacuum every time I anticipate high CPU load. What steps can I take to deal with this systematically in the long-term? Moving my high CPU load computing to the cloud is not a realistic option. Neither is vacuuming my home office more than once a week! (Details: my computer is on the floor in a Cooler Master HAF922 case, and uses an Intel CPU fan on an i7 chip) EDIT: While this would definitely solve the problem (submerging motherboard in mineral oil), it is a bit of an expensive solution.

    Read the article

  • Dust prevention for home servers [closed]

    - by Payson Welch
    I found some posts on here about dealing with dust relating to servers but nothing that specifically addressed my question. I have several servers at home for research and as you can probably guess they are not cheap. It is impossible for me to remove 100% of the dust from my home as much as I may try. Does anyone know of any practical solutions to filtering the air that will go into the servers? For instance maybe place some sort of material over the bezel to catch dust particles before they enter? I realize the ideal home solution would be to have a small room with environmental controls but I'm not there yet. Thanks!

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Server Cabinet/Room Cooling

    - by user37226
    Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

    Read the article

  • Why My Hi-Tech Chemical Compound Lost Its Full Effectiveness?

    - by Boris_yo
    I have bought this thing a month ago: It is so far best dust cleaner that i have ever used and all was well until i left it out of its package for half day. Then it became sturdy and could be torn apart, less sticky and flexible which i video'ed here. Can this item be restored back to fully functioning state as it was before? Maybe it just became dry and i should put it in a place with moisture? Since all was in Chinese, i also do not know the storage conditions that must be met.

    Read the article

  • Material to use for computer system cover against UV and salty air?

    - by hippietrail
    I live right next to the sea and have a large window quite close to my computer setup which allows a lot of indirect sunlight to enter. I'd like to buy or make a cover for my computer system. From visiting my usual mom & pop computer shop yesterday I got the impression these might not really exist any more. If I make my own I need a material with these qualities: Block or reduce ultraviolet light which can depolymerize plastics (the sun here in Australia is much stronger than in the northern hemisphere). Block salt-laden sea air which can oxidize USB and other connectors. Not cause static electricity when covering or uncovering. Keep dust off of course (-: My setup is a laptop plugged into a wide-screen LCD with a few external drives. So I think I'd want a largish sheet to flop over the whole desk. Are such covers commonly sold these days? What material(s) should I look for which provides the listed attributes?

    Read the article

  • Does liquid cooling mean I no longer need to dust my machine?

    - by Starkers
    I've got two long haired cats, a dog and I live with a smoker. I use my computer pretty much all day everday, and though I put it to sleep in the night, those fans are constantly going during the day. In just 6 months the rear fans have so much hair wrapped around them it looks more like something from a vacuum cleaner rather than electronic equipment! Due to this, I'm interested in liquid cooling. However, it appears that liquid cooled systems have fans and liquid cooling? Are those just hybrid solutions? They wouldn't really help my situation. There does appear to be fanless systems that use a radiator to dissipate heat. If I implemented one of these could I seal up the vents on my PC and never have to dust it again? Is there a disadvantage to fanless liquid cooling? I don't need to overclock at the moment but I ever want to push my components will fanless liquid cooling be pretty rubbish?

    Read the article

  • How to Tell If Your Computer is Overheating and What to Do About It

    - by Chris Hoffman
    Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

    Read the article

  • So Your Laptop’s Fan Has Stopped Working Then? [Humorous Image]

    - by Asian Angel
    There is such a thing as dust build-up and then there are the odd cases of dust-ball evolution… What is the worst case of dust build-up that you have dealt with? Make sure to share your stories with your fellow readers in the comments! Help, my laptop’s fan is not working! [via Reddit Tech Support Gore] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Upgraded to Maverick; can't change theme

    - by Mike Doherty
    Hi, I just upgraded to Maverick, and now I can't change my theme except for the cursor and window border/decoration. I've just reinstalled the themes I want to use (Dust + Dust extra) successfully, and while the window border/decorations change properly when I select them, nothing else changes. The icon set doesn't change; gnome-panel doesn't change. I'm stuck on the fugly fallback theme - the one you see when you do gksudo gedit or something. Halp! -Mike

    Read the article

  • My desktop has started overheating -- how hot is hot?

    - by Jerry
    I have a two year old desktop, some random quad core HP desktop. It used to run very quietly, but in the past month, the fans start up anytime anything "serious" is being done -- compiles, playing video, etc. Right now, speedfan and speccy report the cores are between 50C and 70C. Speedfan reports this as hot. (Nice flame icon.) Well, the system does sit on my carpet, so two weeks ago, I took off the lid, and cough *cough* it was pretty filled with dust. I got out an air can, turned on a vacuum and carefully got out all the dust that I saw on the CPU fan the case fans any fan I saw (graphics board) and blew out all the dust I could from all the circuit boards. And then I closed the case back up. It has definitely run cooler since then, but it still runs hot, and I hear high speed fan noise I never heard before. How hot is too hot? At what temps do consumer grade CPUs die? What should I be looking to do? Replace CPU fan? (It seems to work) Replace power supply fan? Assuming the dust problem is gone, where should I be looking to determine why the machine is heating up? Epilogue: After following the various pieces of advice given here, the system did run cooler, but it was still noticeably running louder (hotter) than just a few months prior. I ended up purchasing a new cpu heatsink and fan and during installation found the cooling grease from the original heatsink was just a dried, cracked layer, probably more of an insulator than heat transfer agent. With the new fan AND the new heatsink compound, the system ran much much cooler and the fan rarely turns on.

    Read the article

  • PC shut downs automatically after 10-20 second. No POST screen, no beeps

    - by emzero
    I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware. UPDATE I've removed the old thermal paste and apply a brand new one. I also cleaned every dust using a high pressure gas dust remover. Checked for bad capacitors, all of them seem ok. Opened the PSU, removed big giant dust balls, cleaned with high pressure dust remover. Still the same problem, but now it stays powered on for almost 20 seconds maybe. But no POST screen, no beeps at all, nothing. So I suspect it's a motherboard or PSU failure. Unfortunately I don't have an energy tester to test the PSU... Don't know what else to try. I don't have another 775-motherboard to test the CPU, RAM and VGA with it.

    Read the article

  • Network Server Cabinets - How does the ventilation work?

    - by Nicholas
    Recently I've been looking at a range of network server cabinets with a mesh door at the rear. At the top of the cabinet are ceiling mounted fans with dust filters attached. These fans suck air out of the cabinet - presumably to remove the hot air that has risen to the top. My question is why do these fans have dust filters? What point do they serve? If the air flow is pulled in by these fans through the mesh door, then surely they are not there to protect the hardware inside from dust? Also, there are other minor grilled gaps around the enclosure, how does this kind of ventilation design work?

    Read the article

  • NSMutableArray to NSString and Passing NSString to Another View IOS5.1

    - by Space Dust
    I have an NSMutableArray of names. I want the pass the data (selected name) inside of NSMutableArray as text to another view's label. FriendsController.m: - (void)viewDidLoad { [super viewDidLoad]; arrayOfNames=[[NSMutableArray alloc] init]; arrayOfIDs=[[NSMutableArray alloc] init]; userName=[[NSString alloc] init]; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { long long fbid = [[arrayOfIDs objectAtIndex:indexPath.row]longLongValue]; NSString *user=[NSString stringWithFormat:@"%llu/picture",fbid]; [facebook requestWithGraphPath:user andDelegate:self]; userName=[NSString stringWithFormat:@"%@",[arrayOfNames objectAtIndex:indexPath.row]]; FriendDetail *profileDetailName = [[FriendDetail alloc] initWithNibName: @"FriendDetail" bundle: nil]; profileDetailName.nameString=userName; [profileDetailName release]; } - (void)request:(FBRequest *)request didLoad:(id)result { if ([result isKindOfClass:[NSData class]]) { transferImage = [[UIImage alloc] initWithData: result]; FriendDetail *profileDetailPicture = [[FriendDetail alloc] initWithNibName: @"FriendDetail" bundle: nil]; [profileDetailPicture view]; profileDetailPicture.profileImage.image= transferImage; profileDetailPicture.modalTransitionStyle = UIModalTransitionStyleCrossDissolve; [self presentModalViewController:profileDetailPicture animated:YES]; [profileDetailPicture release]; } } In FriendDetail.h NSString nameString; IBOutlet UILabel *profileName; @property (nonatomic, retain) UILabel *profileName; @property (nonatomic, retain) NSString *nameString; In FriendDetail.m - (void)viewDidLoad { [super viewDidLoad]; profileName.text=nameString; } nameString in second controller(FriendDetail) returns nil. When i set a breakpoint in firstcontroller I see the string inside of nameString is correct but after that it returns to nil somehow.

    Read the article

  • How to add objects to NSArray from a different class with ARC

    - by Space Dust
    I needed to convert my code to ARC. I have an NSArray that I use to draw a path. I fill the objects of NSArray values from a different class. Problem is after converting to ARC, NSArray returns always null I can not see what I am doing wrong. bug.h @interface Ladybug : CCSprite <CCTargetedTouchDelegate>{ CCArray *linePathPosition; } @property (nonatomic, strong) CCArray *linePathPosition; @end bug.m @synthesize linePathPosition; -(id) init { if( (self=[super init] )) { self.linePathPosition = [[CCArray alloc] init]; } return self; } -(void) updatePosition:(CGPoint) position { [self.linePathPosition addObject:[NSValue valueWithCGPoint:position]]; NSLog(@"line path %@",linePathPosition); } -(void) breakMoveLadyBug { [self.linePathPosition removeAllObjects]; } In main .m - (void)ccTouchMoved:(UITouch *)touch withEvent:(UIEvent *)event { Ladybug *ladybug1 = (Ladybug *)[self getChildByTag:99]; CCMotionStreak* streak = (CCMotionStreak *)[self getChildByTag:999]; CGPoint touchLocation = [touch locationInView: [touch view]]; CGPoint curPosition = [[CCDirector sharedDirector] convertToGL:touchLocation]; if (ladybug1.isSelected) { streak.position = curPosition; [ladybug1 updatePosition:curPosition]; NSLog(@"Cur position %@",NSStringFromCGPoint(curPosition)); if (!ladybug1.isMoving) { [ladybug1 startMoveLadyBug]; } } } Log: Cur position {331, 110} line path (null) What am I doing wrong? What is the proper way to define and init NSArray with ARC?

    Read the article

  • Blu-ray BD-R: Would you physically store it in a CaseLogic Wallet pocket?

    - by Rob
    I keep several backup copies of my material and files. For my DVDs, one set of copies is kept in a CaseLogic wallet folder pack, so that I can easily move this around when visiting friends, family or for business. This is highly convenient. The other sets are kept in their jewel cases in hard plastic see thru storage boxes. Although CaseLogic wallet material is designed to be abrasion free, their caveat is that external dust will be the cause of any blemishes. If hard dust gets in these pockets, which is inevitable, this will occasionally cause light hair like scratches on the disc surface as the discs are removed and returned for access to their contents. This is of no consequence as the laser and error correction can more than cope with this. I'm aware that the blu-ray spec requires anti-scratch in disc surfaces but was wondering that, given the smaller pits, would dust and light scratches from wallet storage cause more problems with blu-rays than they would with DVDs? I'm using Blu-ray BD-R and BD-R DL write once media.

    Read the article

  • How to clean this Dell Precision M6400

    - by Daniel Pratt
    I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

    Read the article

1 2 3 4 5 6 7 8 9  | Next Page >