Search Results

Search found 13 results on 1 pages for 'hdl'.

Page 1/1 | 1 

• Problem setting output flags for ALU in "Nand to Tetris" course

  - by MahlerFive

  Although I tagged this homework, it is actually for a course which I am doing on my own for free. Anyway, the course is called "From Nand to Tetris" and I'm hoping someone here has seen or taken the course so I can get some help. I am at the stage where I am building the ALU with the supplied hdl language. My problem is that I can't get my chip to compile properly. I am getting errors when I try to set the output flags for the ALU. I believe the problem is that I can't subscript any intermediate variable, since when I just try setting the flags to true or false based on some random variable (say an input flag), I do not get the errors. I know the problem is not with the chips I am trying to use since I am using all builtin chips. Here is my ALU chip so far: /** * The ALU. Computes a pre-defined set of functions out = f(x,y) * where x and y are two 16-bit inputs. The function f is selected * by a set of 6 control bits denoted zx, nx, zy, ny, f, no. * The ALU operation can be described using the following pseudocode: * if zx=1 set x = 0 // 16-bit zero constant * if nx=1 set x = !x // Bit-wise negation * if zy=1 set y = 0 // 16-bit zero constant * if ny=1 set y = !y // Bit-wise negation * if f=1 set out = x + y // Integer 2's complement addition * else set out = x & y // Bit-wise And * if no=1 set out = !out // Bit-wise negation * * In addition to computing out, the ALU computes two 1-bit outputs: * if out=0 set zr = 1 else zr = 0 // 16-bit equality comparison * if out<0 set ng = 1 else ng = 0 // 2's complement comparison */ CHIP ALU { IN // 16-bit inputs: x[16], y[16], // Control bits: zx, // Zero the x input nx, // Negate the x input zy, // Zero the y input ny, // Negate the y input f, // Function code: 1 for add, 0 for and no; // Negate the out output OUT // 16-bit output out[16], // ALU output flags zr, // 1 if out=0, 0 otherwise ng; // 1 if out<0, 0 otherwise PARTS: // Zero the x input Mux16( a=x, b=false, sel=zx, out=x2 ); // Zero the y input Mux16( a=y, b=false, sel=zy, out=y2 ); // Negate the x input Not16( in=x, out=notx ); Mux16( a=x, b=notx, sel=nx, out=x3 ); // Negate the y input Not16( in=y, out=noty ); Mux16( a=y, b=noty, sel=ny, out=y3 ); // Perform f Add16( a=x3, b=y3, out=addout ); And16( a=x3, b=y3, out=andout ); Mux16( a=andout, b=addout, sel=f, out=preout ); // Negate the output Not16( in=preout, out=notpreout ); Mux16( a=preout, b=notpreout, sel=no, out=out ); // zr flag Or8way( in=out[0..7], out=zr1 ); // PROBLEM SHOWS UP HERE Or8way( in=out[8..15], out=zr2 ); Or( a=zr1, b=zr2, out=zr ); // ng flag Not( in=out[15], out=ng ); } So the problem shows up when I am trying to send a subscripted version of 'out' to the Or8Way chip. I've tried using a different variable than 'out', but with the same problem. Then I read that you are not able to subscript intermediate variables. I thought maybe if I sent the intermediate variable to some other chip, and that chip subscripted it, it would solve the problem, but it has the same error. Unfortunately I just can't think of a way to set the zr and ng flags without subscripting some intermediate variable, so I'm really stuck! Just so you know, if I replace the problematic lines with the following, it will compile (but not give the right results since I'm just using some random input): // zr flag Not( in=zx, out=zr ); // ng flag Not( in=zx, out=ng ); Anyone have any ideas? Edit: Here is the appendix of the book for the course which specifies how the hdl works. Specifically look at section 5 which talks about buses and says: "An internal pin (like v above) may not be subscripted". Edit: Here is the exact error I get: "Line 68, Can't connect gate's output pin to part". The error message is sort of confusing though, since that does not seem to be the actual problem. If I just replace "Or8way( in=out[0..7], out=zr1 );" with "Or8way( in=false, out=zr1 );" it will not generate this error, which is what lead me to look up in the appendix and find that the out variable, since it was derived as intermediate, could not be subscripted.

  Read the article

• Verilog code simulates but does not run as predicted on FPGA

  - by chester.boo

  I did a behavioral simulation of my code, and it works perfectly. The results are as predicted. When I synthesize my code and upload it to a spartan 3e FPGA and try to analyze using chipscope, the results are not even close to what I would have expected. What have I done incorrectly? http://pastebin.com/XWMekL7r

  Read the article

• Verilog linting tools?

  - by mrflibble

  What are your favorite linting tools for verilog? I am currently looking for a good verilog linting tool. And preferably one that can be configured to either handle or ignore certain vendor specific primitives like LUT's, PLL's, etc. I recently tried verilator-3.810, but out of the box it needs a little help with the primitives. So what (linting) tools do you use to deal with the not-so-strict syntax of verilog?

  Read the article

• fail2ban custom action to permanent ban IPs from China

  - by John Magnolia

  When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

  Read the article

• How to reference other documents in a couchDB view (joining like functionality)

  - by Surfrdan

  We have a CouchDB representation of an XML database which we use to power a javascript based frontend for manipulating the XML documents. The basic structure is a simple 3 level hierachy. i.e. A - B - C A: Parent doucument (type A) B: any number of child documents of parent type A C: any number of child documents of parent type B We represent these 3 document types in CouchDB with a 'type' attribute: e.g. { "_id":"llgc-id:433", "_rev":"1-3760f3e01d7752a7508b047e0d094301", "type":"A", "label":"Top Level A document", "logicalMap":{ "issues":{ "1":{ "URL":"http://hdl.handle.net/10107/434-0", "FILE":"llgc-id:434" }, "2":{ "URL":"http://hdl.handle.net/10107/467-0", "FILE":"llgc-id:467" etc... } } } } { "_id":"llgc-id:433", "_rev":"1-3760f3e01d7752a7508b047e0d094301", "type":"B", "label":"a B document", } What I want to do is produce a view which returns documents just like the A type but includes the label attribute from the B document within the logicalMap list e.g. { "_id":"llgc-id:433", "_rev":"1-3760f3e01d7752a7508b047e0d094301", "type":"A", "label":"Top Level A document", "logicalMap":{ "issues":{ "1":{ "URL":"http://hdl.handle.net/10107/434-0", "FILE":"llgc-id:434", "LABEL":"a B document" }, "2":{ "URL":"http://hdl.handle.net/10107/467-0", "FILE":"llgc-id:467", "LABEL":"another B document" etc... } } } } I'm struggling to get my head around the best way to perform this. It looks like it should be fairly simple though!

  Read the article

• Parent Objects

  - by Ali Bahrami

  Support for Parent Objects was added in Solaris 11 Update 1. The following material is adapted from the PSARC arc case, and the Solaris Linker and Libraries Manual. A "plugin" is a shared object, usually loaded via dlopen(), that is used by a program in order to allow the end user to add functionality to the program. Examples of plugins include those used by web browsers (flash, acrobat, etc), as well as mdb and elfedit modules. The object that loads the plugin at runtime is called the "parent object". Unlike most object dependencies, the parent is not identified by name, but by its status as the object doing the load. Historically, building a good plugin is has been more complicated than it should be: A parent and its plugin usually share a 2-way dependency: The plugin provides one or more routines for the parent to call, and the parent supplies support routines for use by the plugin for things like memory allocation and error reporting. It is a best practice to build all objects, including plugins, with the -z defs option, in order to ensure that the object specifies all of its dependencies, and is self contained. However: The parent is usually an executable, which cannot be linked to via the usual library mechanisms provided by the link editor. Even if the parent is a shared object, which could be a normal library dependency to the plugin, it may be desirable to build plugins that can be used by more than one parent, in which case embedding a dependency NEEDED entry for one of the parents is undesirable. The usual way to build a high quality plugin with -z defs uses a special mapfile provided by the parent. This mapfile defines the parent routines, specifying the PARENT attribute (see example below). This works, but is inconvenient, and error prone. The symbol table in the parent already describes what it makes available to plugins — ideally the plugin would obtain that information directly rather than from a separate mapfile. The new -z parent option to ld allows a plugin to link to the parent and access the parent symbol table. This differs from a typical dependency: No NEEDED record is created. The relationship is recorded as a logical connection to the parent, rather than as an explicit object name However, it operates in the same manner as any other dependency in terms of making symbols available to the plugin. When the -z parent option is used, the link-editor records the basename of the parent object in the dynamic section, using the new tag DT_SUNW_PARENT. This is an informational tag, which is not used by the runtime linker to locate the parent, but which is available for diagnostic purposes. The ld(1) manpage documentation for the -z parent option is: -z parent=object Specifies a "parent object", which can be an executable or shared object, against which to link the output object. This option is typically used when creating "plugin" shared objects intended to be loaded by an executable at runtime via the dlopen() function. The symbol table from the parent object is used to satisfy references from the plugin object. The use of the -z parent option makes symbols from the object calling dlopen() available to the plugin. Example For this example, we use a main program, and a plugin. The parent provides a function named parent_callback() for the plugin to call. The plugin provides a function named plugin_func() to the parent: % cat main.c #include <stdio.h> #include <dlfcn.h> #include <link.h> void parent_callback(void) { printf("plugin_func() has called parent_callback()\n"); } int main(int argc, char **argv) { typedef void plugin_func_t(void); void *hdl; plugin_func_t *plugin_func; if (argc != 2) { fprintf(stderr, "usage: main plugin\n"); return (1); } if ((hdl = dlopen(argv[1], RTLD_LAZY)) == NULL) { fprintf(stderr, "unable to load plugin: %s\n", dlerror()); return (1); } plugin_func = (plugin_func_t *) dlsym(hdl, "plugin_func"); if (plugin_func == NULL) { fprintf(stderr, "unable to find plugin_func: %s\n", dlerror()); return (1); } (*plugin_func)(); return (0); } % cat plugin.c #include <stdio.h> extern void parent_callback(void); void plugin_func(void) { printf("parent has called plugin_func() from plugin.so\n"); parent_callback(); } Building this in the traditional manner, without -zdefs: % cc -o main main.c % cc -G -o plugin.so plugin.c % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() As noted above, when building any shared object, the -z defs option is recommended, in order to ensure that the object is self contained and specifies all of its dependencies. However, the use of -z defs prevents the plugin object from linking due to the unsatisfied symbol from the parent object: % cc -zdefs -G -o plugin.so plugin.c Undefined first referenced symbol in file parent_callback plugin.o ld: fatal: symbol referencing errors. No output written to plugin.so A mapfile can be used to specify to ld that the parent_callback symbol is supplied by the parent object. % cat plugin.mapfile $mapfile_version 2 SYMBOL_SCOPE { global: parent_callback { FLAGS = PARENT }; }; % cc -zdefs -Mplugin.mapfile -G -o plugin.so plugin.c However, the -z parent option to ld is the most direct solution to this problem, allowing the plugin to actually link against the parent object, and obtain the available symbols from it. An added benefit of using -z parent instead of a mapfile, is that the name of the parent object is recorded in the dynamic section of the plugin, and can be displayed by the file utility: % cc -zdefs -zparent=main -G -o plugin.so plugin.c % elfdump -d plugin.so | grep PARENT [0] SUNW_PARENT 0xcc main % file plugin.so plugin.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent main, dynamically linked, not stripped % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() We can also observe this in elfedit plugins on Solaris systems running Solaris 11 Update 1 or newer: % file /usr/lib/elfedit/dyn.so /usr/lib/elfedit/dyn.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent elfedit, dynamically linked, not stripped, no debugging information available Related Other Work The GNU ld has an option named --just-symbols that can be used in a similar manner: --just-symbols=filename Read symbol names and their addresses from filename, but do not relocate it or include it in the output. This allows your output file to refer symbolically to absolute locations of memory defined in other programs. You may use this option more than once. -z parent is a higher level operation aimed specifically at simplifying the construction of high quality plugins. Although it employs the same operation, it differs from --just symbols in 2 significant ways: There can only be one parent. The parent is recorded in the created object, and can be displayed by 'file', or other similar tools.

  Read the article

• Setting up a pc bluetooth server for android

  - by Del

  Alright, I've been reading a lot of topics the past two or three days and nothing seems to have asked this. I am writing a PC side server for my andriod device, this is for exchanging some information and general debugging. Eventually I will be connecting to a SPP device to control a microcontroller. I have managed, using the following (Android to pc) to connect to rfcomm channel 11 and exchange data between my android device and my pc. Method m = device.getClass().getMethod("createRfcommSocket", new Class[] { int.class }); tmp = (BluetoothSocket) m.invoke(device, Integer.valueOf(11)); I have attempted the createRfcommSocketToServiceRecord(UUID) method, with absolutely no luck. For the PC side, I have been using the C Bluez stack for linux. I have the following code which registers the service and opens a server socket: int main(int argc, char **argv) { struct sockaddr_rc loc_addr = { 0 }, rem_addr = { 0 }; char buf[1024] = { 0 }; char str[1024] = { 0 }; int s, client, bytes_read; sdp_session_t *session; socklen_t opt = sizeof(rem_addr); session = register_service(); s = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); loc_addr.rc_family = AF_BLUETOOTH; loc_addr.rc_bdaddr = *BDADDR_ANY; loc_addr.rc_channel = (uint8_t) 11; bind(s, (struct sockaddr *)&loc_addr, sizeof(loc_addr)); listen(s, 1); client = accept(s, (struct sockaddr *)&rem_addr, &opt); ba2str( &rem_addr.rc_bdaddr, buf ); fprintf(stderr, "accepted connection from %s\n", buf); memset(buf, 0, sizeof(buf)); bytes_read = read(client, buf, sizeof(buf)); if( bytes_read 0 ) { printf("received [%s]\n", buf); } sprintf(str,"to Android."); printf("sent [%s]\n",str); write(client, str, sizeof(str)); close(client); close(s); sdp_close( session ); return 0; } sdp_session_t *register_service() { uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; uint8_t rfcomm_channel = 11; const char *service_name = "Remote Host"; const char *service_dsc = "What the remote should be connecting to."; const char *service_prov = "Your mother"; uuid_t root_uuid, l2cap_uuid, rfcomm_uuid, svc_uuid; sdp_list_t *l2cap_list = 0, *rfcomm_list = 0, *root_list = 0, *proto_list = 0, *access_proto_list = 0; sdp_data_t *channel = 0, *psm = 0; sdp_record_t *record = sdp_record_alloc(); // set the general service ID sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); sdp_set_service_id( record, svc_uuid ); // make the service record publicly browsable sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP); root_list = sdp_list_append(0, &root_uuid); sdp_set_browse_groups( record, root_list ); // set l2cap information sdp_uuid16_create(&l2cap_uuid, L2CAP_UUID); l2cap_list = sdp_list_append( 0, &l2cap_uuid ); proto_list = sdp_list_append( 0, l2cap_list ); // set rfcomm information sdp_uuid16_create(&rfcomm_uuid, RFCOMM_UUID); channel = sdp_data_alloc(SDP_UINT8, &rfcomm_channel); rfcomm_list = sdp_list_append( 0, &rfcomm_uuid ); sdp_list_append( rfcomm_list, channel ); sdp_list_append( proto_list, rfcomm_list ); // attach protocol information to service record access_proto_list = sdp_list_append( 0, proto_list ); sdp_set_access_protos( record, access_proto_list ); // set the name, provider, and description sdp_set_info_attr(record, service_name, service_prov, service_dsc); int err = 0; sdp_session_t *session = 0; // connect to the local SDP server, register the service record, and // disconnect session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); err = sdp_record_register(session, record, 0); // cleanup //sdp_data_free( channel ); sdp_list_free( l2cap_list, 0 ); sdp_list_free( rfcomm_list, 0 ); sdp_list_free( root_list, 0 ); sdp_list_free( access_proto_list, 0 ); return session; } And another piece of code, in addition to 'sdptool browse local' which can verifty that the service record is running on the pc: int main(int argc, char **argv) { uuid_t svc_uuid; uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; int err; bdaddr_t target; sdp_list_t *response_list = NULL, *search_list, *attrid_list; sdp_session_t *session = 0; str2ba( "01:23:45:67:89:AB", &target ); // connect to the SDP server running on the remote machine session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); // specify the UUID of the application we're searching for sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); search_list = sdp_list_append( NULL, &svc_uuid ); // specify that we want a list of all the matching applications' attributes uint32_t range = 0x0000ffff; attrid_list = sdp_list_append( NULL, &range ); // get a list of service records that have UUID 0xabcd err = sdp_service_search_attr_req( session, search_list, \ SDP_ATTR_REQ_RANGE, attrid_list, &response_list); sdp_list_t *r = response_list; // go through each of the service records for (; r; r = r-next ) { sdp_record_t *rec = (sdp_record_t*) r-data; sdp_list_t *proto_list; // get a list of the protocol sequences if( sdp_get_access_protos( rec, &proto_list ) == 0 ) { sdp_list_t *p = proto_list; // go through each protocol sequence for( ; p ; p = p-next ) { sdp_list_t *pds = (sdp_list_t*)p-data; // go through each protocol list of the protocol sequence for( ; pds ; pds = pds-next ) { // check the protocol attributes sdp_data_t *d = (sdp_data_t*)pds-data; int proto = 0; for( ; d; d = d-next ) { switch( d-dtd ) { case SDP_UUID16: case SDP_UUID32: case SDP_UUID128: proto = sdp_uuid_to_proto( &d-val.uuid ); break; case SDP_UINT8: if( proto == RFCOMM_UUID ) { printf("rfcomm channel: %d\n",d-val.int8); } break; } } } sdp_list_free( (sdp_list_t*)p-data, 0 ); } sdp_list_free( proto_list, 0 ); } printf("found service record 0x%x\n", rec-handle); sdp_record_free( rec ); } sdp_close(session); } Output: $ ./search rfcomm channel: 11 found service record 0x10008 sdptool: Service Name: Remote Host Service Description: What the remote should be connecting to. Service Provider: Your mother Service RecHandle: 0x10008 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 11 And for logcat I'm getting this: 07-22 15:57:06.087: ERROR/BTLD(215): ****************search UUID = 0000*********** 07-22 15:57:06.087: INFO//system/bin/btld(209): btapp_dm_GetRemoteServiceChannel() 07-22 15:57:06.087: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:06.097: INFO/ActivityManager(88): Displayed activity com.example.socktest/.socktest: 79 ms (total 79 ms) 07-22 15:57:06.697: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:07.517: WARN/BTLD(215): ccb timer ticks: 2147483648 07-22 15:57:07.517: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:07.547: WARN/BTLD(215): info:x10 07-22 15:57:07.547: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14) 07-22 15:57:07.547: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up() 07-22 15:57:07.547: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up: dummy_handle = 342 07-22 15:57:07.547: DEBUG/ADAPTER(253): adapter_get_device(00:02:72:AB:7C:EE) 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:07.777: WARN/BTLD(215): process_service_search_attr_rsp 07-22 15:57:07.787: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 14) 07-22 15:57:07.787: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_rmt_service_channel: success=0, service=00000000 07-22 15:57:07.787: ERROR/DTUN_HCID_BZ4(253): discovery unsuccessful! 07-22 15:57:08.497: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:09.507: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:09.597: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 11 pbytes (hdl 14) 07-22 15:57:09.597: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down() 07-22 15:57:09.597: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down device = 0xf7a0 handle = 342 reason = 22 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:09.597: DEBUG/BluetoothA2dpService(88): Received intent Intent { act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } 07-22 15:57:10.107: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:12.107: DEBUG/BluetoothService(88): Cleaning up failed UUID channel lookup: 00:02:72:AB:7C:EE 00000000-0000-0000-0000-000000000000 07-22 15:57:12.107: ERROR/Socket Test(5234): connect() failed 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: fd 31 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: bind not completed on this socket 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: event BTLIF_BTS_EVT_ABORT matched 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wrp_close_s_only [31] (31:-1) [] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: data socket closed 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wsactive_del: delete wsock 31 from active list [ad3e1494] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wsock fully closed, return to pool 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btsk_free: success 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_destroy 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: btsk not found, normal close (31) 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 33 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (33) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 32 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (32) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 31 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (31) 07-22 15:57:12.157: DEBUG/Sensors(88): close_akm, fd=151 07-22 15:57:12.167: ERROR/CachedBluetoothDevice(477): onUuidChanged: Time since last connect14970690 07-22 15:57:12.237: DEBUG/Socket Test(5234): -On Stop- Sorry for bombarding you guys with what seems like a difficult question and a lot to read, but I've been working on this problem for a while and I've tried a lot of different things to get this working. Let me reiterate, I can get it to work, but not using service discovery protocol. I've tried a several different UUIDs and on two different computers, although I only have my HTC Incredible to test with. I've also heard some rumors that the BT stack wasn't working on the HTC Droid, but that isn't the case, at least, for PC interaction.

  Read the article

• How to make multiple wires quickly in Verilog?

  - by user1334858

  I am trying to make 24 wires in total very quickly but I keep getting the error: Error (10170): Verilog HDL syntax error at your_ALU_mux.v(81) near text "="; expecting ".", or an identifier Here is my code: module your_ALU_mux(your_out, operandA, operandB, opcode, switches, address); input [7:0] operandA, operandB, address; input [3:0] opcode, switches; output [7:0] your_out; wire [0:7] Bnot, newb, newa; wire Cin, Cout; not (Bnot[0], operandB[0]), (Bnot[1], operandB[1]), (Bnot[2], operandB[2]), (Bnot[3], operandB[3]), (Bnot[4], operandB[4]), (Bnot[5], operandB[5]), (Bnot[6], operandB[6]), (Bnot[7], operandB[7]); // Getting A' and B' if (address == 16'h00 || address == 16'h01) // Add A + B if (address == 16'h00) // newa = A newa[0] = operandA[0]; newa[1] = operandA[1]; newa[2] = operandA[2]; newa[3] = operandA[3]; newa[4] = operandA[4]; newa[5] = operandA[5]; newa[6] = operandA[6]; newa[7] = operandA[7]; // newb = B' newb[0] = Bnot[0]; newb[1] = Bnot[1]; newb[2] = Bnot[2]; newb[3] = Bnot[3]; newb[4] = Bnot[4]; newb[5] = Bnot[5]; newb[6] = Bnot[6]; newb[7] = Bnot[7]; // Carry in = 1 Cin = 1; // A-B else if (address == 16'h01) // newb = B newb[0] = operandB[0]; newb[1] = operandB[1]; newb[2] = operandB[2]; newb[3] = operandB[3]; newb[4] = operandB[4]; newb[5] = operandB[5]; newb[6] = operandB[6]; newb[7] = operandB[7]; // newa = A newa[0] = operandA[0]; newa[1] = operandA[1]; newa[2] = operandA[2]; newa[3] = operandA[3]; newa[4] = operandA[4]; newa[5] = operandA[5]; newa[6] = operandA[6]; newa[7] = operandA[7]; // Carry in = 0 Cin = 0; end RippleCarryAdd A+B(.S0(your_out[0]), .S1(your_out[1],.S2(your_out[2],.S3(your_out[3],.S4(your_out[4],.S5(your_out[5] S6.(your_out[6]), S7.(your_out[7], .Cout(Cout),.Cin(Cin), .A0(newa[0]),.A1(newa[1]),.A2(newa[2]),.A3(newa[3]),.A4(newa[4]),.A5(newa[5]), .A6(newa[6]),.A7(newa[7]), .B0(newb[0]),.B1(newb[1]),.B2(newb[2]),.B3(newb[3]),.B4(newb[4]), .B5(newb[5]),.B6(newb[6]),.B7(newb[7])); endmodule I also get in error saying: Error (10170): Verilog HDL syntax error at your_ALU_mux.v(66) near text "if"; expecting "endmodule" And the it brings me to my first if statement. Is this the wrong way of going about creating wires and them using them?

  Read the article

• AutoVue 20.2 for Agile Released

  - by Kerrie Foy

  I saw an important post on the Oracle's AutoVue Enterprise Visualization Blog that I wanted to share with you all in the Agile community.  This was originally posted by Angus Graham here. AutoVue 20.2 for Agile Released Oracle’s AutoVue 20.2 for Agile PLM is now available on Oracle’s Software Delivery Cloud. This latest release allows Agile PLM customers to take advantage of new AutoVue 20.2 features in the following Agile PLM environments: 9.3.1.x; 9.3.0.  AutoVue 20.2 delivers improvements in the following areas. New Format Support: AutoVue 20.2 adds support for the latest versions of popular file formats including: ECAD: Cadence Concept HDL 16.5, Allegro Layout 16.5, Orcad Capture 16.5, Board Station ASCII Symbol Geometry, Cadence Cell Library MCAD: CATIA V5 R21, PTC Creo Parametric 1.0, Creo Element\Direct Modeling 17.10, 17.20, 17.25, 17.30, 18.00, SolidWorks 2012, SolidEdge ST3 & ST4, PLM XML 2D CAD: Creo Element/Direct Drafting 17.10 to 18.00 Office: MS Office 2010: Word, Excel, PowerPoint, Outlook Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards Updated version of AutoVue Document Print Service offerings, which include the ability to select CAD layers for printing  For further details, check out the What’s New in AutoVue 20.2 datasheet

  Read the article

• AutoVue 20.2 for Agile Released

  - by Angus Graham

  Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Oracle’s AutoVue 20.2 for Agile PLM is now available on Oracle’s Software Delivery Cloud. This latest release allows Agile PLM customers to take advantage of new AutoVue 20.2 features in the following Agile PLM environments: 9.3.1.x; 9.3.0.  AutoVue 20.2 delivers improvements in the following areas. New Format Support: AutoVue 20.2 adds support for the latest versions of popular file formats including: ECAD: Cadence Concept HDL 16.5, Allegro Layout 16.5, Orcad Capture 16.5, Board Station ASCII Symbol Geometry, Cadence Cell Library MCAD: CATIA V5 R21, PTC Creo Parametric 1.0, Creo Element\Direct Modeling 17.10, 17.20, 17.25, 17.30, 18.00, SolidWorks 2012, SolidEdge ST3 & ST4, PLM XML 2D CAD: Creo Element/Direct Drafting 17.10 to 18.00 Office: MS Office 2010: Word, Excel, PowerPoint, Outlook Enhancements to AutoVue enterprise readiness: reliability and performance improvements, as well as security enhancements which adhere to Oracle’s Software Security Assurance standards Updated version of AutoVue Document Print Service offerings, which include the ability to select CAD layers for printing  For further details, check out the What’s New in AutoVue 20.2 datasheet

  Read the article

• ??????????

  - by Allen Gao

  ???????RAC??????????????????10gR2?11gR1.??????????????CRS???????1.ocssd : ???????????(Node Monitoring)????(Group Management),??CRS????????????????????????,????????????(network heartbeat)?????(disk heartbeat)???,?????????????????????,????????????,??????????????????,?????node kill escalation(???11gR1????????),??????????????????????????(reboot time,???3?)????????:ocssd.bin??????????????????????????,??????????????????????????????,misscount(???30?,??????????????600?),????????????,???????????????????,?????????????2???,??????,??????????????,?????????????????????:ocssd.bin?????????????(Voting File)??????????,?????????????????????????????,disk timeou(???200?),?????????????????????,CRS???[N/2]+1????????,??N??????,??????2.oclsomon:????????ocssd????,????ocssd.bin??????,???????3.oprocd:??????Linux?Unix??,????????????????????????????????,?????????:????????????init.cssd?????????????????????????1.??????2.<crs???>/log/<????>/cssd/ocssd.log3.oprocd.log(/etc/oracle/oprocd/*.log.* ? /var/opt/oracle/oprocd/*.log.*)4.<crs???>/log/<????>/cssd/oclsomon/oclsomon.log5. Oracle OSWatcher ????????????????????1.?ocssd???????????ocssd.log???????,????????????????????????????????,???????,OSW??(traceroute???),???????(cluster interconnect)??????,?????????[ CSSD]2012-03-02 23:56:18.749 [3086] >WARNING: clssnmPollingThread: node <node_name> at 50% heartbeat fatal, eviction in 14.494 seconds[ CSSD]2012-03-02 23:56:25.749 [3086] >WARNING: clssnmPollingThread: node <node_name> at 75% heartbeat fatal, eviction in 7.494 seconds[ CSSD]2012-03-02 23:56:32.749 [3086] >WARNING: clssnmPollingThread: node <node_name>at 90% heartbeat fatal, eviction in 0.494 seconds[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmPollingThread: Eviction started for node <node_name>, flags 0x040d, state 3, wt4c 0[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmDiscHelper: <node_name>, node(4) connection failed, con (1128a5530), probe(0)[CSSD]2012-03-02 23:56:33.243 [3086] >TRACE:   clssnmDiscHelper: node 4 clean up, con (1128a5530), init state 5, cur state 5[CSSD]2012-03-02 23:56:33.243 [3600] >TRACE:   clssnmDoSyncUpdate: Initiating sync 196446491[CSSD]2012-03-02 23:56:33.243 [3600] >TRACE:   clssnmDoSyncUpdate: diskTimeout set to (27000)ms??:???????ocssd.log?????????????????????,?????????????????????ocssd.log???????,??????????????????????????????,OSWatcher??(iostat???),???i/o????????,?????????2010-08-13 18:34:37.423: [    CSSD][150477728]clssnmvDiskOpen: Opening /dev/sdb82010-08-13 18:34:37.423: [    CLSF][150477728]Opened hdl:0xf4336530 for dev:/dev/sdb8:2010-08-13 18:34:37.429: [   SKGFD][150477728]ERROR: -9(Error 27072, OS Error (Linux Error: 5: Input/output errorAdditional information: 4Additional information: 720913Additional information: -1))2010-08-13 18:34:37.429: [    CSSD][150477728](:CSSNM00060: )clssnmvReadBlocks: read failed at offset 17 of /dev/sdb82010-08-13 18:34:38.205: [    CSSD][4110736288](:CSSNM00058: )clssnmvDiskCheck: No I/O completions for 200880 ms for voting file /dev/sdb8)2010-08-13 18:34:38.206: [    CSSD][4110736288](:CSSNM00018: )clssnmvDiskCheck: Aborting, 0 of 1 configured voting disks available, need 12010-08-13 18:34:38.206: [    CSSD][4110736288]###################################2010-08-13 18:34:38.206: [    CSSD][4110736288]clssscExit: CSSD aborting from thread clssnmvDiskPingMonitorThread 2010-08-13 18:34:38.206: [    CSSD][4110736288]###################################2. ?oclsomon???????????oclsomon.log ?????,??????????ocssd????,??ocssd??????(RT)???,?????????????(?cpu)??,?????????????,OSW??(vmstat,top???),?????????3.?oprocd???????????oprocd?????????,?????????oprocd????? Dec 21 16:15:30.369857 | LASTGASP | AlarmHandler:  timeout(2312 msec) exceeds interval(1000 msec)+margin(500 msec).   Rebooting NOW.??oprocd?????????????????????,?????ntp(?????????),??diagwait=13 ????????,??,?????????????,??????CRS,???????????????,??????????????oprocd????,??,?????OSWatcher??(vmstat,top???),??????????????????????????????,????????????????? ???????,??????MOS ???Note 265769.1 :Troubleshooting 10g and 11.1 Clusterware RebootsNote 1050693.1 :Troubleshooting 11.2 Clusterware Node Evictions (Reboots)

  Read the article

• key-words highlight in <textarea> (again)

  - by Halst

  Wait, I know! I know that this "syntax highlight in textarea"-question was raised like a million times on stackoverflow! But, please, listen. offtopic: I'm not a web-developer, and technically I'm not a programmer at all. I study mechatronics and deal mostly with control-engineering and digital-hardware. And I'm so pissed off that whenever I want to share some application (that would be helpful in my field) and embed it into the web, I need to know such a crazy amount of technologies, like html, css, javascript, flash, etc.. that takes time, which I could have been spending for the benefit of my own field. Right now I'm playing with hardware-description-languages and I'm writing some Python-libraries to convert one HDL into another. And I wanted to embed such feature on the web: http://xhdl2vhdl.appspot.com/ I wanted to implement some basic syntax highlighting (only keywords highlighting will be enough) so that the code could be readable. But the whole idea highlighting something in textarea is not trivial at all. The other difficulty is that the languages I work with are rare, and there are no out-of-box solutions for them. I tried to dig into these solutions, but they are very complicated for me: http://www.nicolarizzo.com/gamesroom/experimental/CodeEditor.html http://marijn.haverbeke.nl/codemirror/jstest.html and there is no clear descriptions how to use them (for my level of knowledge of web-development). So, is there a simple solution, just to highlight a bunch of key-words in textarea or perform something equivalent? Thank you.

  Read the article

• SPP Socket createRfcommSocketToServiceRecord will not connect

  - by philDev

  Hello, I want to use Android 2.1 to connect to an external Bluetooth device, wich is offering an SPP port to me. In this case it is an external GPS unit. When I'm trying to connect I can't connect an established socket while being in the "client" mode. Then if I try to set up a socket (being in the server role), to RECEIVE text from my PC everything works just fine. The Computer can connect as the client to the Socket on the Phone via SPP using the SSP UUID or some random UUID. So the Problem is not that I'm using the wrong UUID. But the other way around (e.g. calling connect on the established client socket) createRfcommSocketToServiceRecord(UUID uuid)) just doesn't work. Sadly I don't have the time to inspect the problem further. It would be greate If somebody could point me the right way. In the following part of the Logfile has to be the Problem. Greets PhilDev P.S. I'm going to be present during the Office hours. Here the log file: 03-21 03:10:52.020: DEBUG/BluetoothSocket.cpp(4643): initSocketFromFdNative 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): connect 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): doSdp 03-21 03:10:52.050: DEBUG/ADAPTER(2132): create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.050: DEBUG/ADAPTER(2132): adapter_create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.055: DEBUG/DEVICE(2132): Creating device [address = 01:00:00:7F:B5:B3] /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 [name = ] 03-21 03:10:52.055: DEBUG/DEVICE(2132): btd_device_ref(0x10c18): ref=1 03-21 03:10:52.065: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:DeviceCreated from /org/bluez/2132/hci0 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Object Path = /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Pattern = 00001101-0000-1000-8000-00805f9b34fb, strlen = 36 03-21 03:10:52.070: DEBUG/DEVICE(2132): *************DiscoverServices******** 03-21 03:10:52.070: INFO/DTUN_HCID(2132): dtun_client_get_remote_svc_channel: starting discovery on (uuid16=0x0011) 03-21 03:10:52.070: INFO/DTUN_HCID(2132): bdaddr=01:00:00:7F:B5:B3 03-21 03:10:52.070: INFO/DTUN_CLNT(2132): Client calling DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4) 03-21 03:10:52.070: INFO/(2106): DTUN_ReceiveCtrlMsg: [DTUN] Received message [BTLIF_DTUN_METHOD_CALL] 4354 03-21 03:10:52.070: INFO/(2106): handle_method_call: handle_method_call :: received DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4), len 134 03-21 03:10:52.075: ERROR/BTLD(2106): ****************search UUID = 1101*********** 03-21 03:10:52.075: INFO//system/bin/btld(2103): btapp_dm_GetRemoteServiceChannel() 03-21 03:10:52.120: DEBUG/BluetoothService(1914): updateDeviceServiceChannelCache(01:00:00:7F:B5:B3) 03-21 03:10:52.120: DEBUG/BluetoothEventLoop(1914): ClassValue: null for remote device: 01:00:00:7F:B5:B3 is null 03-21 03:10:52.120: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:PropertyChanged from /org/bluez/2132/hci0 03-21 03:10:52.305: WARN/BTLD(2106): bta_dm_check_av:0 03-21 03:10:56.395: DEBUG/WifiService(1914): ACTION_BATTERY_CHANGED pluggedType: 2 03-21 03:10:57.440: WARN/BTLD(2106): SDP - Rcvd conn cnf with error: 0x4 CID 0x43 03-21 03:10:57.440: INFO/BTL-IFS(2106): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 10) 03-21 03:10:57.445: INFO/DTUN_CLNT(2132): dtun-rx signal [DTUN_SIG_DM_RMT_SERVICE_CHANNEL] (id 42) len 15 03-21 03:10:57.445: INFO/DTUN_HCID(2132): dtun_dm_sig_rmt_service_channel: success=1, service=00000000 03-21 03:10:57.445: ERROR/DTUN_HCID(2132): discovery unsuccessful! package de.phil_dev.android.BT; import java.io.BufferedInputStream; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.util.UUID; import android.app.Activity; import android.bluetooth.BluetoothAdapter; import android.bluetooth.BluetoothClass; import android.bluetooth.BluetoothDevice; import android.bluetooth.BluetoothServerSocket; import android.bluetooth.BluetoothSocket; import android.content.Intent; import android.os.Bundle; import android.util.Log; import android.widget.Toast; public class ThinBTClient extends Activity { private static final String TAG = "THINBTCLIENT"; private static final boolean D = true; private BluetoothAdapter mBluetoothAdapter = null; private BluetoothSocket btSocket = null; private BufferedInputStream inStream = null; private BluetoothServerSocket myServerSocket; private ConnectThread myConnection; private ServerThread myServer; // Well known SPP UUID (will *probably* map to // RFCOMM channel 1 (default) if not in use); // see comments in onResume(). private static final UUID MY_UUID = UUID .fromString("00001101-0000-1000-8000-00805F9B34FB"); // .fromString("94f39d29-7d6d-437d-973b-fba39e49d4ee"); // ==> hardcode your slaves MAC address here <== // PC // private static String address = "00:09:DD:50:86:A0"; // GPS private static String address = "00:0B:0D:8E:D4:33"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); if (D) Log.e(TAG, "+++ ON CREATE +++"); mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter(); if (mBluetoothAdapter == null) { Toast.makeText(this, "Bluetooth is not available.", Toast.LENGTH_LONG).show(); finish(); return; } if (!mBluetoothAdapter.isEnabled()) { Toast.makeText(this, "Please enable your BT and re-run this program.", Toast.LENGTH_LONG).show(); finish(); return; } if (D) Log.e(TAG, "+++ DONE IN ON CREATE, GOT LOCAL BT ADAPTER +++"); } @Override public void onStart() { super.onStart(); if (D) Log.e(TAG, "++ ON START ++"); } @Override public void onResume() { super.onResume(); if (D) { Log.e(TAG, "+ ON RESUME +"); Log.e(TAG, "+ ABOUT TO ATTEMPT CLIENT CONNECT +"); } // Make the phone discoverable // When this returns, it will 'know' about the server, // via it's MAC address. // mBluetoothAdapter.startDiscovery(); BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address); Log.e(TAG, device.getName() + " connected"); // myServer = new ServerThread(); // myServer.start(); myConnection = new ConnectThread(device); myConnection.start(); } @Override public void onPause() { super.onPause(); if (D) Log.e(TAG, "- ON PAUSE -"); try { btSocket.close(); } catch (IOException e2) { Log.e(TAG, "ON PAUSE: Unable to close socket.", e2); } } @Override public void onStop() { super.onStop(); if (D) Log.e(TAG, "-- ON STOP --"); } @Override public void onDestroy() { super.onDestroy(); if (D) Log.e(TAG, "--- ON DESTROY ---"); } private class ServerThread extends Thread { private final BluetoothServerSocket myServSocket; public ServerThread() { BluetoothServerSocket tmp = null; // create listening socket try { tmp = mBluetoothAdapter .listenUsingRfcommWithServiceRecord( "myServer", MY_UUID); } catch (IOException e) { Log.e(TAG, "Server establishing failed"); } myServSocket = tmp; } public void run() { Log.e(TAG, "Beginn waiting for connection"); BluetoothSocket connectSocket = null; InputStream inStream = null; byte[] buffer = new byte[1024]; int bytes; while (true) { try { connectSocket = myServSocket.accept(); } catch (IOException e) { Log.e(TAG, "Connection failed"); break; } Log.e(TAG, "ALL THE WAY AROUND"); try { connectSocket = connectSocket.getRemoteDevice() .createRfcommSocketToServiceRecord(MY_UUID); connectSocket.connect(); } catch (IOException e1) { Log.e(TAG, "DIDNT WORK"); } // handle Connection try { inStream = connectSocket.getInputStream(); while (true) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); break; } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); break; } } } void cancel() { } } private class ConnectThread extends Thread { private final BluetoothSocket mySocket; private final BluetoothDevice myDevice; public ConnectThread(BluetoothDevice device) { myDevice = device; BluetoothSocket tmp = null; try { tmp = device.createRfcommSocketToServiceRecord(MY_UUID); } catch (IOException e) { Log.e(TAG, "CONNECTION IN THREAD DIDNT WORK"); } mySocket = tmp; } public void run() { Log.e(TAG, "STARTING TO CONNECT THE SOCKET"); setName("My Connection Thread"); InputStream inStream = null; boolean run = false; //mBluetoothAdapter.cancelDiscovery(); try { mySocket.connect(); run = true; } catch (IOException e) { run = false; Log.e(TAG, this.getName() + ": CONN DIDNT WORK, Try closing socket"); try { mySocket.close(); } catch (IOException e1) { Log.e(TAG, this.getName() + ": COULD CLOSE SOCKET", e1); this.destroy(); } } synchronized (ThinBTClient.this) { myConnection = null; } byte[] buffer = new byte[1024]; int bytes; // handle Connection try { inStream = mySocket.getInputStream(); while (run) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } // starting connected thread (handling there in and output } public void cancel() { try { mySocket.close(); } catch (IOException e) { Log.e(TAG, this.getName() + " SOCKET NOT CLOSED"); } } } }

  Read the article

1