Search Results

Search found 11 results on 1 pages for 'jona ekenberg'.

Page 1/1 | 1 

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which produces the following output trixbox1.localdomain ~]# setup-pstn -------------------------------------------------------------- Detecting PSTN cards and USB PSTN Devices -------------------------------------------------------------- Hardware present! STOPPING ASTERISK Asterisk Stopped STOPPING FOP SERVER FOP Server Stopped Unloading DAHDI hardware modules: done Loading DAHDI hardware modules: wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] opvxa1200: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] wcb4xxp: [ OK ] wctc4xxp: [ OK ] xpp_usb: [ OK ] Running dahdi_cfg: [ OK ] SETTING FILE PERMISSIONS Permissions OK STARTING ASTERISK Asterisk Started STARTING FOP SERVER FOP Server Started Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service dahdi_scan returns: dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 10 basechan=1 totchans=4 irq=209 type=analog port=1,FXO port=2,none port=3,none port=4,none And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook A cat of /etc/asterisk/dahdi.conf shows: [trixbox1.localdomain ~]# cat /etc/asterisk/dahdi-channels.conf ; Autogenerated by /usr/sbin/dahdi_genconf on Tue May 25 17:45:13 2010 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". I have one outbound route which uses the dial pattern 9|. and the Trunk Zap/1 and one Zap Trunk which uses Zap Identifier (trunk name): 1 and has no Dial Rules. The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. When running tail -f /var/log/asterisk/full and placing a call I get the following output: [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP TOS bits 184 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP CoS mark 5 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP TOS bits 136 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP CoS mark 6 [May 26 11:10:52] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:1] Macro("SIP/801-b7ce8c28", "user-callerid,SKIPTTL,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/801-b7ce8c28", "1?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/801-b7ce8c28", "AMPUSERCIDNAME=Jona") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/801-b7ce8c28", "AMPUSERCID=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/801-b7ce8c28", "CALLERID(all)="Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/801-b7ce8c28", "REALCALLERIDNUM=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/801-b7ce8c28", "0?Set(CHANNEL(language)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/801-b7ce8c28", "1?continue") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-user-callerid,s,20) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/801-b7ce8c28", "Using CallerID "Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:2] Set("SIP/801-b7ce8c28", "_NODEST=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:3] Macro("SIP/801-b7ce8c28", "record-enable,801,OUT,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/801-b7ce8c28", "1?check") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-record-enable,s,4) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/801-b7ce8c28", "recordingcheck,20100526-111052,1274868652.1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck [May 26 11:10:52] VERBOSE[2858] logger.c: recordingcheck,20100526-111052,1274868652.1: Outbound recording not enabled [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28>AGI Script recordingcheck completed, returning 0 [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:4] Macro("SIP/801-b7ce8c28", "dialout-trunk,1,01483890915,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/801-b7ce8c28", "DIAL_TRUNK=1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/801-b7ce8c28", "0?sub-pincheck,s,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/801-b7ce8c28", "0?disabletrunk,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/801-b7ce8c28", "DIAL_NUMBER=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=tr") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/801-b7ce8c28", "OUTBOUND_GROUP=OUT_1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/801-b7ce8c28", "1?nomax") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s,9) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/801-b7ce8c28", "0?skipoutcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/801-b7ce8c28", "outbound-callerid,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/801-b7ce8c28", "0?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/801-b7ce8c28", "1?normcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,6) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/801-b7ce8c28", "USEROUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/801-b7ce8c28", "EMERGENCYCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/801-b7ce8c28", "TRUNKOUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/801-b7ce8c28", "1?trunkcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,12) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/801-b7ce8c28", "0?AGI(fixlocalprefix)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/801-b7ce8c28", "OUTNUM=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/801-b7ce8c28", "custom=DAHDI/1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/801-b7ce8c28", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/801-b7ce8c28", "dialout-trunk-predial-hook,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/801-b7ce8c28", "0?bypass,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/801-b7ce8c28", "0?customtrunk") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/801-b7ce8c28", "DAHDI/1/01483890915,300,") in new stack [May 26 11:10:52] WARNING[2858] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) [May 26 11:10:52] VERBOSE[2858] logger.c: == Everyone is busy/congested at this time (1:0/0/1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/801-b7ce8c28", "s-CHANUNAVAIL,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/801-b7ce8c28", "1?noreport") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/801-b7ce8c28", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:5] Macro("SIP/801-b7ce8c28", "outisbusy,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/801-b7ce8c28", "all-circuits-busy-now,noanswer") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'all-circuits-busy-now.ulaw' (language 'en') [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:2] Playback("SIP/801-b7ce8c28", "pls-try-call-later,noanswer") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'pls-try-call-later.ulaw' (language 'en') [May 26 11:10:54] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/801-b7ce8c28' in macro 'outisbusy' [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (from-internal, 901483890915, 5) exited non-zero on 'SIP/801-b7ce8c28' [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [h@from-internal:1] Macro("SIP/801-b7ce8c28", "hangupcall") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/801-b7ce8c28", "vw") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/801-b7ce8c28", "1?skiprg") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,6) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/801-b7ce8c28", "1?skipblkvm") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,9) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/801-b7ce8c28", "1?theend") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,11) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/801-b7ce8c28' in macro 'hangupcall' [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/801-b7ce8c28' I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• My ASUS U32U with fresh Xubuntu install shows a black screen 50-80% of the startups

  - by Jona Ekenberg

  I have recently installed Ubuntu 12.10 with Xubuntu-package on my ASUS U32U notebook (Radeon HD 6320 GPU). The issue I have is that more often than not, after the GRUB-select screen I get a black screen, and three times total white lines (kind of) flashes very quickly (with maybe 5 seconds between each flash). I'm not even able to get to the login-screen (nor the Xubuntu loading screen). At first I thought it was simply me having installed something dumb or messed up some settings, but even after reformatting the partition and installing ubuntu again, the problem remains. Before I formatted it xfce4's window manager wouldn't start either, but it does now (when I am able to see anything). I can access the virual consoles (ctrl+alt+f1), but I can't see anything, but I've managed to shutdown the computer by using it (sudo shutdown -h now).

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

• asterisk send mute command to jukebox on incoming call

  - by Jona

  Hi, We're trialling a Asterisk Now server to take over from our ageing PBX system. One of the "nice to have" features would be the ability to pause or lower the volume on the office jukebox if an incoming call is detected. We currently run a linux jukebox which plays music out of the speakers using mpd and can be controlled by the mpc client. We can manually issue the following command to achieve this: mpc volume 20 Does anyone know how to get asterisk to execute this command or some action that we could hook into when a phone call is incoming to specific extensions?

  Read the article

• openvz graphing user_beancounters

  - by Jona

  Hi there, We run a cluster of openvz servers and are looking for a way to automatically graph the content of user_beancounters for all ves. We currently have a fairly rudimentary cron which alerts us when limits are hit but we could like a graphing solution to show us history. Obviously we could roll our own using some fancy bash/php/perl and rrdtool but we're wondering if there are any existing solutions before we go down this path. We current run a cacti/snmp based graphing infrastructure.

  Read the article

• BGP Router reccomendations for simple redundancy [closed]

  - by Jona

  We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

  Read the article

• Office jukebox systems

  - by Jona

  We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

  Read the article

• I would like to make a field part of a many to many relationship

  - by jona

  I have the following table called stores id store zip 1 Market 1 01569 2 Market 2 01551 3 Market 3 10468 4 Market 4 10435 Zip code table INSERT INTO `zip_codes` (`restaurants_locations_id`, `zip`, `state`, `latitude`, `longitude`, `city`, `full_state`) VALUES (1, '06001', 'CT', ' 41.789698', ' -72.86431', 'Avon', 'Connecticut'), (2, '06002', 'CT', ' 41.832798', ' -72.72642', 'Bloomfield', 'Connecticut'), (3, '06010', 'CT', ' 41.682249', ' -72.93365', 'Bristol', 'Connecticut'), (4, '06013', 'CT', ' 41.758415', ' -72.94642', 'Burlington', 'Connecticut'), (5, '06016', 'CT', ' 41.909097', ' -72.54393', 'Windsorville', 'Connecticut'), (6, '06018', 'CT', ' 42.023510', ' -73.31103', 'Canaan', 'Connecticut'), (7, '06019', 'CT', ' 41.834247', ' -72.89174', 'Canton', 'Connecticut'), etc.... what I want is to create a table which will connect the zip field in the stores tables where one store will be found in several zicodes... How would that table would look like? Thanks

  Read the article

• little java help....

  - by jona

  Hi I am doing some practice problems and trying to print a diagonal line like the example below. I have writen the program you see below and I honestly dont understand what I am doing wrong. I m a java beginner and I cant see how to find the error. Example ( If you only see a straight line of stars...then imagine it diagonally....from top left to bottom right) * * * * * code: class Diagonal{ public static void main(String args[]) { int row, col; for(row = 1; row < 6; row++) { for(col = 1; col <= row; col++) { if(col==row){ System.out.print("*"); } else{ System.out.print(""); } System.out.println(); } } } } I am trying to learn for loops because they really confuse me. Another practice is to print a similar diagonal line but this time from right to left. I cant do that without getting this right however :( I believe they will be pretty similar? Above my reasining is this: As long as the column # is the same as the row number the print the line or otherwise leave a blank....what's wrong with how i did it? THANK YOU!

  Read the article

• CSS Z-Index with Gradient Background

  - by Jona

  I'm making a small webpage where the I would like the top banner with some text to remain on top, as such: HTML: <div id = "topBanner"> <h1>Some Text</h1> </div> CSS: #topBanner{ position:fixed; background-color: #CCCCCC; width: 100%; height:200px; top:0; left:0; z-index:900; background: -moz-linear-gradient(top, rgba(204,204,204,0.65) 0%, rgba(204,204,204,0.44) 32%, rgba(204,204,204,0.12) 82%, rgba(204,204,204,0) 100%); /* FF3.6+ */ background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(204,204,204,0.65)), color-stop(32%,rgba(204,204,204,0.44)), color-stop(82%,rgba(204,204,204,0.12)), color-stop(100%,rgba(204,204,204,0))); /* Chrome,Safari4+ */ background: -webkit-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* Chrome10+,Safari5.1+ */ background: -o-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* Opera 11.10+ */ background: -ms-linear-gradient(top, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* IE10+ */ background: linear-gradient(to bottom, rgba(204,204,204,0.65) 0%,rgba(204,204,204,0.44) 32%,rgba(204,204,204,0.12) 82%,rgba(204,204,204,0) 100%); /* W3C */ filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#a6cccccc', endColorstr='#00cccccc',GradientType=0 ); /* IE6-9 */ } /*WebPage Header*/ h1{ font-size:3em; color:blue; text-shadow:#CCCCCC 2px 2px 2px, #000 0 -1px 2px; position: absolute; width: 570px; left:50%; right:50%; line-height:20px; margin-left: -285px; z-index:999; } The z-index works fine, except that because I'm using a gradient any time I scroll down the elements behind the banner are still visible, albeit somewhat transparent. Is there any way to make them total invisible? i.e., what I'm trying to do is make it as though the banner is a solid color, even though it's a gradient. Thanks in advance for any help!

  Read the article

• User activation problem in JSF by providing a link to user?

  - by Paul

  I am giving a link to user to activate his account. Link is http://xyz.in/JSF_WEB_WFE/faces/index.jsp?confirmuser=jona&emailid=valid. I read the parameters in a Beans constructor and then making some decision like, activated / already activated. It works fine in local but while we deploy in web some times it works fine and some time not. what may be the problem. What can we do for better solution?

  Read the article

1