Search Results

Search found 19 results on 1 pages for 'logstash'.

Page 1/1 | 1 

• Logstash shipper & server on the samebox

  - by keftes

  I'm trying to setup a central logstash configuration. However I would like to be sending my logs through syslog-ng and not third party shippers. This means that my logstash server is accepting via syslog-ng all the logs from the agents. I then need to install a logstash process that will be reading from /var/log/syslog-clients/* and grabbing all the log files that are sent to the central log server. These logs will then be sent to redis on the same VM. In theory I need to also configure a second logstash process that will read from redis and start indexing the logs and send them to elasticsearch. My question: Do I have to use two different logstash processes (shipper & server) even if I am in the same box (I want one log server instance)? Is there any way to just have one logstash configuration and have the process read from syslog-ng --- write to redis and also read from redis --- output to elastic search ? Diagram of my setup: [client]-------syslog-ng--- [log server] ---syslog-ng <----logstash-shipper --- redis <----logstash-server ---- elastic-search <--- kibana

  Read the article

• "Tail" a logstash server query

  - by phatmanace

  Assuming I have a logstash server chocked full of logs being loaded regularly, is there a reasonably elegant way that I can tail the results of a continuously executing query on the logstash server and show this in a terminal window e.g some-special-logstash-command.sh | egrep -v "(searchword1|searchword2)" the idea being that the command pipes stuff out of logstash and to my grep query that filters and shows me the filtered output for. .. of course if there is a logstash command that can do the grep piece for me as well, then that works too :) motivation for doing this, is that assuming all of my events from my estate is being loaded into logstash, then would be nice to have a terminal window with a continuous tail of interesting events as they occur scrolling past the screen. -Ace

  Read the article

• Problems configuring logstash for email output

  - by user2099762

  I'm trying to configure logstash to send email alerts and log output in elasticsearch / kibana. I have the logs successfully syncing via rsyslog, but I get the following error when I run /opt/logstash-1.4.1/bin/logstash agent -f /opt/logstash-1.4.1/logstash.conf --configtest Error: Expected one of #, {, ,, ] at line 23, column 12 (byte 387) after filter { if [program] == "nginx-access" { grok { match = [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} [%{HTTPDATE:time_local}] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded = false host = " Here is my logstash config file input { syslog { type => syslog port => 5544 } } filter { if [program] == "nginx-access" { grok { match => [ "message" , "%{IPORHOST:remote_addr} - %{USERNAME:remote_user} \[% {HTTPDATE:time_local}\] %{QS:request} %{INT:status} %{INT:body_bytes_sent} %{QS:http_referer} %{QS:http_user_agent}” ] } } } output { stdout { } elasticsearch { embedded => false host => "localhost" cluster => "cluster01" } email { from => "logstash[email protected]" match => [ "Error 504 Gateway Timeout", "status,504", "Error 404 Not Found", "status,404" ] subject => "%{matchName}" to => "[email protected]" via => "smtp" body => "Here is the event line that occured: %{@message}" htmlbody => "<h2>%{matchName}</h2><br/><br/><h3>Full Event</h3><br/><br/><div align='center'>%{@message}</div>" } } I've checked line 23 which is referenced in the error and it looks fine....I've tried taking out the filter, and everything works...without changing that line. Please help

  Read the article

• Logstash agent doesn't run as a daemon on MAC OS X 10.9.1

  - by user329324

  I need to run the logstash agent as a Daemon on an MAC OS X System whenever the system boots up terminal: /usr/local/logstash/bin/logstash agent -f /usr/local/etc/cvlog.conf Per terminal the program is working succesfully but as an daemon it doesn't start. My com.bcd.logstash.plist <plist version="1.0"> <dict> <key>Label</key> <string>com.bcd.logstash</string> <key>KeepAlive</key> <dict> <key>SuccessfulExit</key> </false> </dict> <key>ProgramArguments</key> <array> <string>/usr/local/logstash/bin/logstash</string> <string>agent</string> <string>-f</string> <string>/usr/local/etc/cvlog.conf</string> </array> <key>RunAtLoad</key> </true> </dict> </plist> I start with: launchtl load /Library/LaunchDaemons/com.bcd.logstash.plist Syslog Error Message com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:1 com.apple.launchd[1] (com.bcd.logstash[pid]): Exited with code:143 What's wrong with my plist?

  Read the article

• Apache multiple vhost logs, stored locally and sent to remote logstash

  - by benbradley

  I'm investigating centralised logging and it seems there's so many different ways this can be done. I don't want to run logstash as a log "sender", preferring to keep the web servers as lean and simple possible. So that means either using syslog, syslog-ng or the one I'm testing now, rsyslog. But I would like to have separate vhost log files on the web server, in addition to these logs being sent to a remote log collector. I've tested rsyslog using the imfile module to watch the Apache log files, but this means I have to hard-code each vhost log file into my rsyslog.conf. Not ideal as people will invariably forget when they add/remove sites on the server. The reason I'm using rsyslog's imfile is that Apache doesn't appear to let you log to file and syslog. And I want to keep vhost-specific log files on the web server. So how can I do this? Is there a way of having rsyslog produce local log files and forward the logs to a remote collector? I am prepared to change my Apache config to log to a single access/error log for all vhosts, so long as there are vhost-specific log files produced somewhere on the web server machine. I just don't want to lose any logging info if the remote log collector can't be contacted for any reason. Any comments/suggestions? Cheers, B

  Read the article

• Postfix - searching emails (logstash, greylog or other solution)

  - by Yarik Dot

  We are currently having ~100 servers and all of them are using remote syslog, so we have aggregated all logs on one server. The most questioned problem from our support team is: Has an email from .... to ... been delivered? I'd like to give to our support team access to some logging tool and some guide for searching in logs. What would you have recommended me? Or, do you know any other alternatives to test? The problem of grepping logs is that there is not sender and recipient address on one line. So I supposed, there might by some aggregation by email id.

  Read the article

• CentOS centralised logging, syslogd, rsyslog, syslog-ng, logstash sender?

  - by benbradley

  I'm trying to figure out the best way to setup a central place to store and interrogate server logs. syslog, Apache, MySQL etc. I've found a few different options but I'm not sure what would be best. I'm looking for something that is easy to install and keep updated on many virtual machines. I can add it to a VM template going forward but I'd also like it to be easy to install to keep the VM complexity down. The options I've found so far are: syslogd syslog-ng rsyslog syslogd/syslog-ng/rsyslog to logstash/ElasticSearch logstash agent in each log "client" to send to Redis/logstash/ElasticSearch And all sorts of permutations of the above. What's the most resilient and light from the log "client" perspective? I'd like to avoid the situation where log "clients" hang because they are unable to send their logs to the logging server. Also I would still like to keep local logging and the rotation/retention provided by logrotate in place. Any ideas/suggestions or reasons for or against any of the above? Or suggestions of a different structure entirely? Cheers, B

  Read the article

• Linking RSA with Logstash etc

  - by Anuj

  i was wondering whether we can use logstash or any other opn source or free Log management too to collect,index the data and then feed this index into RSA envision or any other enterprise SIEM tool. Will this be beneficial in any way? Also are the indexes of various Log Management and SIEM tools -- splunk,RSA envision,HP Arcsight Logger and Logstash etc compatiable with each other. My organization is planning to buy RSA envision appliance and is there any way to restrict or select only certian type of log files eg: security logs or apache logs .. so that onlt those are monitored and this will reduce the EPS(events per second).

  Read the article

• How to maintain the log source host using logstash

  - by Ray Rodriguez

  I am following the steps in this blog to set up rsyslog + logstash + graylog2 and I can't figure out how to replace the @source_host attribute in logstash using the mutate - replace filter. In the exmaple the author replaces his @source_host with a string value but I'd like to use the actual value that is parsed from in this case a syslog. mutate { type => loc1 replace => ["@source_host", "loc1"] } mutate { type => loc2 replace => ["@source_host", "loc2"] } How do I actually maintain the original source host in my logs?

  Read the article

• Hiera concatenated lookup from yaml

  - by Brian

  I am trying to configure the puppet-logstash module via Hiera. When I make the call to hiera('profiles::logstash::config'), the return value is a concatenated string. It tells me that it cannot convert a String into a hash. shipper.pp class profiles::logstash::shipper() { $shipper_config = hiera('profiles::logstash::config') notice("${shipper_config}") class { 'logstash': ensure => 'present', version => '1.4.1-1_bd507eb', status => 'enabled', } profiles::logstash::config { $shipper_config: } include logstash } hostname.yaml classes: - os::repo - profiles::logstash::shipper profiles::logstash::config: - {content: this is a test, order: 10} Output when used with notice(): order10contentthis is a test Did I order my YAML wrong?

  Read the article

• Foward slash in kibana 3 query

  - by G Mawr

  I'm trying to add a query that will match a request that ends with a slash, like this one: n.n.n.n - - [16/Oct/2013:16:40:41 +0100] "GET / HTTP/1.1" 200 25058 "-" "Mozilla/5.0 (iPad; CPU OS 7_0_2 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A501 Safari/9537.53" I'm using the Lucene query type. If my query is set to *, I see the event. If I set it to request:"css", I see CSS requests, as expected. However, all of the following yield no results: request:"/" request:"\/" request:"\\/" I tried a Lucene regular expression, with no luck: request:/\// I note that someone else is getting what appears to be a similar issue, although that's on Kibana 2: https://github.com/rashidkpc/Kibana/issues/401 How can I query for requests that end with a / character?

  Read the article

• Using rspec to check creation of template

  - by Brian

  I am trying to use rspec with puppet to check the generation of a configuration file from an .erb file. However, I get the error 1) customizations should generate valid logstash.conf Failure/Error: content = catalogue.resource('file', 'logstash.conf').send(:parameters)[:content] ArgumentError: wrong number of arguments (0 for 1) # ./spec/classes/logstash_spec.rb:29:in `catalogue' # ./spec/classes/logstash_spec.rb:29 And the logstash_spec.rb: describe "customizations" do let(:params) { {:template => "profiles/logstash/output_broker.erb", :options => {'opt_a' => 'value_a' } } } it 'should generate valid logstash.conf' do content = catalogue.resource('file', 'logstash.conf').send(:parameters)[:content] content.should match('logstash') end end

  Read the article

• simple and reliable centralized logging inside Amazon VPC

  - by Nakedible

  I need to set up centralized logging for a set of servers (10-20) in an Amazon VPC. The logging should be as to not lose any log messages in case any single server goes offline - or in the case that an entire availability zone goes offline. It should also tolerate packet loss and other normal network conditions without losing or duplicating messages. It should store the messages durably, at the minimum on two different EBS volumes in two availability zones, but S3 is a good place as well. It should also be realtime so that the messages arrive within seconds of their generation to two different availability zones. I also need to sync logfiles not generated via syslog, so a syslog-only centralized logging solution would not fulfill all the needs, although I guess that limitation could be worked around. I have already reviewed a few solutions, and I will list them here: Flume to Flume to S3: I could set up two logservers as Flume hosts which would store log messages either locally or in S3, and configure all the servers with Flume to send all messages to both servers, using the end-to-end reliability options. That way the loss of a single server shouldn't cause lost messages and all messages would arrive in two availability zones in realtime. However, there would need to be some way to join the logs of the two servers, deduplicating all the messages delivered to both. This could be done by adding a unique id on the sending side to each message and then write some manual deduplication runs on the logfiles. I haven't found an easy solution to the duplication problem. Logstash to Logstash to ElasticSearch: I could install Logstash on the servers and have them deliver to a central server via AMQP, with the durability options turned on. However, for this to work I would need to use some of the clustering capable AMQP implementations, or fan out the deliver just as in the Flume case. AMQP seems to be a yet another moving part with several implementations and no real guidance on what works best this sort of setup. And I'm not entirely convinced that I could get actual end-to-end durability from logstash to elasticsearch, assuming crashing servers in between. The fan-out solutions run in to the deduplication problem again. The best solution that would seem to handle all the cases, would be Beetle, which seems to provide high availability and deduplication via a redis store. However, I haven't seen any guidance on how to set this up with Logstash and Redis is one more moving part again for something that shouldn't be terribly difficult. Logstash to ElasticSearch: I could run Logstash on all the servers, have all the filtering and processing rules in the servers themselves and just have them log directly to a removet ElasticSearch server. I think this should bring me reliable logging and I can use the ElasticSearch clustering features to share the database transparently. However, I am not sure if the setup actually survives Logstash restarts and intermittent network problems without duplicating messages in a failover case or similar. But this approach sounds pretty promising. rsync: I could just rsync all the relevant log files to two different servers. The reliability aspect should be perfect here, as the files should be identical to the source files after a sync is done. However, doing an rsync several times per second doesn't sound fun. Also, I need the logs to be untamperable after they have been sent, so the rsyncs would need to be in append-only mode. And log rotations mess things up unless I'm careful. rsyslog with RELP: I could set up rsyslog to send messages to two remote hosts via RELP and have a local queue to store the messages. There is the deduplication problem again, and RELP itself might also duplicate some messages. However, this would only handle the things that log via syslog. None of these solutions seem terribly good, and they have many unknowns still, so I am asking for more information here from people who have set up centralized reliable logging as to what are the best tools to achieve that goal.

  Read the article

• Is it possible to export Windows event logs from multiple servers to a non-windows host, without running event manager on each of the Windows servers?

  - by Taylor Matyasz

  I want to export event logs from Windows to a non-Windows host. I was considering using Logstash, but that would seem to require that I install and run Logstash on each server. Is it possible to do this without having to run it on all of the servers? I am hoping to be able to consolidate all of the information from different servers to make searching and reporting much easier. If not, what would you recommend is the best way to export to a non-Windows host in real time? Thank you.

  Read the article

• rsyslogd not monitoring all files

  - by Tom O'Connor

  So.. I've installed Logstash, and instead of using the logstash shipper (because it needs the JVM and is generally massive), I'm using rsyslogd with the following configuration. # Use traditional timestamp format $ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat $IncludeConfig /etc/rsyslog.d/*.conf # Provides kernel logging support (previously done by rklogd) $ModLoad imklog # Provides support for local system logging (e.g. via logger command) $ModLoad imuxsock # Log all kernel messages to the console. # Logging much else clutters up the screen. #kern.* /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none;cron.none;local6.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* -/var/log/maillog # Log cron stuff cron.* /var/log/cron # Everybody gets emergency messages *.emerg * # Save news errors of level crit and higher in a special file. uucp,news.crit /var/log/spooler # Save boot messages also to boot.log local7.* /var/log/boot.log In /etc/rsyslog.d/logstash.conf there are 28 file monitor blocks using imfile $ModLoad imfile # Load the imfile input module $ModLoad imklog # for reading kernel log messages $ModLoad imuxsock # for reading local syslog messages $InputFileName /var/log/rabbitmq/startup_err $InputFileTag rmq-err: $InputFileStateFile state-rmq-err $InputFileFacility local6 $InputRunFileMonitor .... $InputFileName /var/log/some.other.custom.log $InputFileTag cust-log: $InputFileStateFile state-cust-log $InputFileFacility local6 $InputRunFileMonitor .... *.* @@10.90.0.110:5514 There are 28 InputFileMonitor blocks, each monitoring a different custom application logfile.. If I run [root@secret-gm02 ~]# lsof|grep rsyslog rsyslogd 5380 root cwd DIR 253,0 4096 2 / rsyslogd 5380 root rtd DIR 253,0 4096 2 / rsyslogd 5380 root txt REG 253,0 278976 1015955 /sbin/rsyslogd rsyslogd 5380 root mem REG 253,0 58400 1868123 /lib64/libgcc_s-4.1.2-20080825.so.1 rsyslogd 5380 root mem REG 253,0 144776 1867778 /lib64/ld-2.5.so rsyslogd 5380 root mem REG 253,0 1718232 1867780 /lib64/libc-2.5.so rsyslogd 5380 root mem REG 253,0 23360 1867787 /lib64/libdl-2.5.so rsyslogd 5380 root mem REG 253,0 145872 1867797 /lib64/libpthread-2.5.so rsyslogd 5380 root mem REG 253,0 85544 1867815 /lib64/libz.so.1.2.3 rsyslogd 5380 root mem REG 253,0 53448 1867801 /lib64/librt-2.5.so rsyslogd 5380 root mem REG 253,0 92816 1868016 /lib64/libresolv-2.5.so rsyslogd 5380 root mem REG 253,0 20384 1867990 /lib64/rsyslog/lmnsd_ptcp.so rsyslogd 5380 root mem REG 253,0 53880 1867802 /lib64/libnss_files-2.5.so rsyslogd 5380 root mem REG 253,0 23736 1867800 /lib64/libnss_dns-2.5.so rsyslogd 5380 root mem REG 253,0 20768 1867988 /lib64/rsyslog/lmnet.so rsyslogd 5380 root mem REG 253,0 11488 1867982 /lib64/rsyslog/imfile.so rsyslogd 5380 root mem REG 253,0 24040 1867983 /lib64/rsyslog/imklog.so rsyslogd 5380 root mem REG 253,0 11536 1867987 /lib64/rsyslog/imuxsock.so rsyslogd 5380 root mem REG 253,0 13152 1867989 /lib64/rsyslog/lmnetstrms.so rsyslogd 5380 root mem REG 253,0 8400 1867992 /lib64/rsyslog/lmtcpclt.so rsyslogd 5380 root 0r REG 0,3 0 4026531848 /proc/kmsg rsyslogd 5380 root 1u IPv4 1200589517 0t0 TCP 10.10.10.90 t:40629->10.10.10.90:5514 (ESTABLISHED) rsyslogd 5380 root 2u IPv4 1200589527 0t0 UDP *:45801 rsyslogd 5380 root 3w REG 253,3 17999744 2621483 /var/log/messages rsyslogd 5380 root 4w REG 253,3 13383 2621484 /var/log/secure rsyslogd 5380 root 5w REG 253,3 7180 2621493 /var/log/maillog rsyslogd 5380 root 6w REG 253,3 43321 2621529 /var/log/cron rsyslogd 5380 root 7w REG 253,3 0 2621494 /var/log/spooler rsyslogd 5380 root 8w REG 253,3 0 2621495 /var/log/boot.log rsyslogd 5380 root 9r REG 253,3 1064271998 2621464 /var/log/custom-application.monolog.log rsyslogd 5380 root 10u unix 0xffff81081fad2e40 0t0 1200589511 /dev/log You can see that there are nowhere near 28 logfiles actually being read. I really had to get one file monitored, so I moved it to the top, and it picked it up, but I'd like to be able to monitor all 28+ files, and not have to worry. OS is Centos 5.5 Kernel 2.6.18-308.el5 rsyslogd 3.22.1, compiled with: FEATURE_REGEXP: Yes FEATURE_LARGEFILE: Yes FEATURE_NETZIP (message compression): Yes GSSAPI Kerberos 5 support: Yes FEATURE_DEBUG (debug build, slow code): No Atomic operations supported: Yes Runtime Instrumentation (slow code): No Questions: Why is rsyslogd only monitoring a very small subset of the files? How can I fix this so that all the files are monitored?

  Read the article

• thought on real time web analytics

  - by Linus

  we have a few web servers and am planning to create a dashboard to show the real time stats ip address,geo-location and other custom data based on database lookups. Splunk sort of fits perfectly but wondering if there are any open source alternative . i have looked at logstash and graylog2, but to my knowledge they are more of a log analysis tools. Piwik is sort of interesting except that i cannot put any javascript on the webpages. All i have access to is apache web log. Any recommendations please..

  Read the article

• Preferred method for allowing unprivileged UNIX/Linux users to view syslog information

  - by Joshua Hoblitt

  I have some non-privileged "role accounts" that need the ability to view [some of] the local syslogs (eg. /var/log/messages) for debugging purposes. This is explicitly local log data, not remote syslog, logstash, etc. Obviously, there's several ways to address this issue. What I'd like to know is if there is a fairly "standardized" way to solve this issue. Typically, I solve this problem with sudo but either POSIX groups or acls is attractive as it's few chars for the users to type and it removes entries from the sudo log. However, I don't believe I've ever seen that done before. What is your experience? How do large install base sites address this?

  Read the article

• How to go about rotating logs which are arbitrary named and placed in deeply nested directories?

  - by Roman Grazhdan

  I have a couple of hosts which are basically a playground for developers. On these hosts, each of them has a directory under /tmp where he is free to do all he wants - store files, write logs etc. Of course, the logs are to be rotated, or else the disc will be 100% full in a week. The files can be plenty, but I've dealt with it with paths like /tmp/[a-e]*/* and so on and lived happily for a while, but as they try new cool stuff on the machine logrotate rules grow ugly and unmanageable, and it's getting more difficult to understand which files hit the glob. Also, logrotate would segfault if asked to rotate a socket. I don't feel like trying to enforce some naming policies in that environment, I think it's going to take quite a lot of time and get people annoyed and still would fail at some point. And I still need to manage the logs, not just rm the dirs at night. So is it a good idea in circumstances like these to write a script which would handle these temporary files? I prefer sticking with standard utilities whenever possible, but here I think logrotate is getting less and less manageable. And probably someone heard of some logrotate alternatives which would work well in such an environment? I don't need emailing logs or some other advanced features, so theoretically some well commented find | xargs would do. P.S. I do have a log aggregator but this stuff is not going to touch my little cute logstash machine.

  Read the article

• Exception in thread "main" java.lang.NoSuchMethodError: sun/misc/Unsafe.allocateDBBMemory

  - by user2524935

  Has anyone been able to compile JRuby on a s390x Linux system? I am trying to use LogStash, which apparently requires JRuby, however SLES 11 has no JRuby repo included. jar ant produces the following. compile-annotation-binder: [javac] Compiling 18 source files to /home/user7/jruby-1.7.4/build/classes/jruby [javac] warning: [options] bootstrap class path not set in conjunction with -source 1.6 [javac] Note: /home/user7/jruby-1.7.4/src/org/jruby/util/CodegenUtils.java uses unchecked or unsafe operations. [javac] Note: Recompile with -Xlint:unchecked for details. [javac] 1 warning compile-jruby: [javac] Compiling 1395 source files to /home/user7/jruby-1.7.4/build/classes/jruby [javac] Exception in thread "main" java.lang.NoSuchMethodError: sun/misc/Unsafe.allocateDBBMemory(J)J [javac] at java.nio.DirectByteBuffer.(DirectByteBuffer.java:127) [javac] at java.nio.ByteBuffer.allocateDirect(ByteBuffer.java:306) [javac] at sun.misc.Perf.createLong(Native Method) [javac] at sun.misc.PerfCounter.(PerfCounter.java:77) [javac] at sun.misc.PerfCounter.newPerfCounter(PerfCounter.java:83) [javac] at sun.misc.PerfCounter$CoreCounters.(PerfCounter.java:140) [javac] at java.lang.J9VMInternals.initializeImpl(Native Method) [javac] at java.lang.J9VMInternals.initialize(J9VMInternals.java:236) [javac] at sun.misc.PerfCounter.getZipFileOpenTime(PerfCounter.java:194) [javac] at java.util.zip.ZipFile.(ZipFile.java:230) [javac] at java.util.zip.ZipFile.(ZipFile.java:159) [javac] at java.util.jar.JarFile.(JarFile.java:167) [javac] at java.util.jar.JarFile.(JarFile.java:104) [javac] at sun.misc.URLClassPath$JarLoader.getJarFile(URLClassPath.java:958) [javac] at sun.misc.URLClassPath$JarLoader.access$700(URLClassPath.java:826) [javac] at sun.misc.URLClassPath$JarLoader$1.run(URLClassPath.java:909) [javac] at sun.misc.URLClassPath$JarLoader$1.run(URLClassPath.java:899) [javac] at java.security.AccessController.doPrivileged(AccessController.java:280) [javac] at sun.misc.URLClassPath$JarLoader.ensureOpen(URLClassPath.java:898) [javac] at sun.misc.URLClassPath$JarLoader.(URLClassPath.java:871) [javac] at sun.misc.URLClassPath$3.rtJarLoader(URLClassPath.java:596) [javac] at sun.misc.URLClassPath$3.run(URLClassPath.java:546) [javac] at sun.misc.URLClassPath$3.run(URLClassPath.java:536) [javac] at java.security.AccessController.doPrivileged(AccessController.java:280) [javac] at sun.misc.URLClassPath.getLoader(URLClassPath.java:535) [javac] at sun.misc.URLClassPath.getLoader(URLClassPath.java:498) [javac] at sun.misc.URLClassPath.getResource(URLClassPath.java:324) [javac] at java.net.URLClassLoader$ClassFinder.run(URLClassLoader.java:1157) [javac] at java.security.AccessController.doPrivileged(AccessController.java:314) [javac] at java.net.URLClassLoader.findClass(URLClassLoader.java:594) [javac] at java.lang.ClassLoader.loadClassHelper(ClassLoader.java:743) [javac] at java.lang.ClassLoader.loadClass(ClassLoader.java:711) [javac] at java.lang.ClassLoader.loadClassHelper(ClassLoader.java:735) [javac] at java.lang.ClassLoader.loadClass(ClassLoader.java:711) [javac] at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:325) [javac] at java.lang.ClassLoader.loadClass(ClassLoader.java:690) [javac] at sun.launcher.LauncherHelper.checkAndLoadMain(LauncherHelper.java:494) BUILD FAILED /home/user7/jruby-1.7.4/build.xml:636: The following error occurred while executing this line: /home/user7/jruby-1.7.4/build.xml:289: Compile failed; see the compiler error output for details. Total time: 1 minute 37 seconds Line 636 of build.xml <target name="jar" depends="init" description="Create the jruby.jar file. Used during dev."> -> <antcall target="jar-jruby" inheritall="true"/> </target> Line 289 of build.xml <javac destdir="${jruby.classes.dir}" fork="true" debug="true" source="${javac.version}" target="${javac.version}" -> deprecation="true" encoding="UTF-8" includeantruntime="true" memorymaximumsize="${jruby.compile.memory}"> <classpath refid="jruby.execute.classpath"/> <src path="${src.dir}"/> <exclude name="org/jruby/runtime/Constants.java"/> java -version java version "1.7.0" Java(TM) SE Runtime Environment (build pxz6470sr4fp1-20130325_01(SR4 FP1)) IBM J9 VM (build 2.6, JRE 1.7.0 Linux s390x-64 Compressed References 20130306_140761 (JIT enabled, AOT enabled) J9VM - R26_Java726_SR4_FP1_20130306_1011_B140761 JIT - r11.b03_20130131_32403ifx1 GC - R26_Java726_SR4_FP1_20130306_1011_B140761_CMPRSS J9CL - 20130306_140761) JCL - 20130315_01 based on Oracle 7u13-b08 ant -version Apache Ant version 1.7.1

  Read the article

1