Search Results

Search found 3121 results on 125 pages for 'resolution independence'.

Page 10/125 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Host name resolution on a home network

    - by Kris
    Hi, I have several machines (both virtual and physical) in my internal network at home. Currently I have to connect via 1P addresses. The one main machine I connect with to all the other machines is running Windows Vista. Is there a way I can have some sort of DNS capability inside my network as well so I can refer to these machines with a name? I think this would be a common problem in most households (running a few computers) and I think there might be some simple solutions out there. This would be something most routers should support out of the box - but why don't they? Can anyone recommend some of these or an easy way to accomplish this?

    Read the article

  • Using native resolution on external display results in stretched, out of bounds image

    - by Roni Yaniv
    I have an HP min 311 netbook with Windows XP, which I've connected to a Samsung SyncMaster 2043BW display via the supplied analog cable. The external display's native res is 1680x1050, which the netbook's ION GPU supports. I've configured the external display as the single display (no cloning or any such fancy stuff). However, once I set the native res, the image just stretches out. It looks squashed, and it goes outside the monitor's edges. In contrast, lower resolutions manage to stay within the monitor's display edges, though obviously they are skewed in some way (vertically or horizontally). BTW, the only res which seems to be displayed relatively clearly (it's the least blurry) is 1280x720. I tried looking all over the web for an explanation/advice but could not find any. I already played with the settings on the external display itself several times. So either it's not that, or I missed something. Has someone run into this issue? I need help.

    Read the article

  • VPS DNS Resolution problem

    - by fatnic
    Hi. I've recently moved from a shared hosting to a VPS at vps.net but I think I might have broken it already! I have domain.com and domain.net. I have setup DNS records for both to point to my server. However, only domain.com pings to the correct IP address. domain.net is pointing to a different IP address. Possibly the old server it was pointing to. This has now been deleted. Is there possibly any way to correct this without having to submit a ticket to VPS.net?

    Read the article

  • Buying Dual Monitors of different size and resolution

    - by rutherford
    I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

    Read the article

  • Buying Dual Monitors of different size and resolution

    - by rutherford
    I'm about to go choose a dual monitor setup: 1) Is there any reason why I can't just walk out and buy the two TFT screens I like (a wide screen and a 'portrait' screen) and combine them? Mainly wide screen would be for gaming, and portrait for browsing. I'd want the desktop stretching from one to the other (ie drag pointer, apps from one screen to the other) 2) Also do I need separate gfx cards for each monitor or can one cover both? any performance cost? 3) And can I have separate background images for each, seeing as they'll be different resolutions?

    Read the article

  • DNS resolution problems; dig SERVFAIL error

    - by JustinP
    I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

    Read the article

  • Windows Desktop Randomly Switches Resolution

    - by bobber205
    Once per log in a specific account, Windows XP is switching to 800x600 and 8 (looks like) bit color. It then after a few seconds switches back to the regular settings. This, so far, has only happened, once per log in session but it is becoming very annoying for the end user. :P Any ideas? I've tried turning off hardware acceleration as well as getting rid of her picture desktop wallpaper but nothing has made a difference. Thanks for any help!

    Read the article

  • Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

    - by DeadMG
    Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

    Read the article

  • Need to hookup HP dv7-3085dx with NVIDIA GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resolution

    - by user14660
    I recently bought an HP laptop (dv7-3085dx) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor. I've now bought an HDMI to dual link DVI cable - this is after Best Buy's 70 dollar HDMI to DVI (perhaps it was 'single' link?) didn't give me the best resolution. In Windows 7, when I try to set the max resolution for my 30" monitor, I only get 1280x800, which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. I therefore can't figure out why I'm not getting a better resolution. When I "detect" my monitor in Windows 7, it is shown correctly as a DELL 3007WFP!

    Read the article

  • Crossplatform way to change screen resolution

    - by macropas
    Is there any crossplatform way (Windows, Linux, MacOSX) to change screen resolution? Neither Java nor .Net-Mono can do it. Only through native API invocation. It's very strange situation: there are clear (managed) methods to obtain screen resolution, but method for setting is absent. Is this feature very dangerous or complicated? Does any other crossplatform system (Parrot, RealBasic etc.) do this?

    Read the article

  • Controls resize based on screen resolution

    - by user337173
    I have panel control. More controls are in panel.I set the dock property for panel as 'fill' .The panel are resized based on screen resolution. but the controls remains same.The controls in the panel are not resized based on screen solution. i have more labels and panels and text-boxs and button in the same page. How to set the dock property to resize all controls in page based on screen resolution? Thanks for any help

    Read the article

  • Screen Resolution Problem In WPF ?

    - by Mohammad
    I'm gonna detect the resolution with the following code in WPF : double height = System.Windows.SystemParameters.PrimaryScreenHeight; double width = System.Windows.SystemParameters.PrimaryScreenWidth; Current resolution of my screen is 1920*1200, but height is 960.0 and width is 1536.0 !!! What's wrong with it ? Thanks in advance.

    Read the article

  • How can I take browser screenshots at a higher resolution than my browser supports?

    - by user53575
    I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 16000x12800 pixels. My laptop's screen has a native resolution of 1280x800. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work? Here was an answer: http://superuser.com/questions/120266/how-can-i-take-browser-screenshots-at-a-higher-resolution-than-my-browser-support But it doesn't work. Firefox remains in the resolution of the physical screen. The window blinks and shrinks back to normal resolution. Please Help!!

    Read the article

  • How do I change my resolution to 1600*900 for a wide screen monitor?

    - by Madhu
    How do I change my resolution to 1600*900 for a wide screen monitor in Oneiric? My Hardware configuration is as below: madhu@madhu-Home:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10) madhu@madhu-Home:~$ cat /etc/X11/xorg.conf

    Read the article

  • how to save a png as a smaller file but the same resolution?

    - by Radek
    not sure what stackexchange site is the best for this question. I have a scanned jpg file with below properties and size 8.5MB pixel dimension: 2468 × 3484 pixels print size: 208.96 × 294.98 millimeters resolution: 300 × 300 ppi I need to save the file as png while the size cannot be bigger than 4MB. The most important is that the size of picture must remain the same. I mean that the object size in the picture must stay the same. Could anybody tell me what is used to define the size of the objects in the picture?

    Read the article

  • What could be the reason for my resolution to be right running 11.10 on VirtualBox and not on machine?

    - by Hadrian de Oliveira
    When I install Ubuntu 11.10 on my VirtualBox (running on Windows 7) and update the packages, it recognizes the display as the VirtualBox display, and gives me the options of various resolutions, one of them being right for my display, all works well. But then, when i install it on my machine (like was Windows 7) it doesn't give me the resolution options, even with the system updated and the openchrome graphics driver installed (which was also when running on Virtualbox). What could be the reason for this happening? (Could the VB guest software influence on this?)

    Read the article

  • Dual monitor, with a low resolution projector

    - by user900978
    I need to show a presentaion to a conference tomorrow. Today I tryed my Ubuntu 10.04 with the projector. My notebook has a resolution of 1440x960, the projector seems to have a really lower resolution. However, thanks to nvidia-settings I configured my video card (a nvidia 9800), it works with other display, but not with the projector. I found the projector, configured as Twin-view, resolution Auto and pressed on Apply, then "Save to x Configuration". On projector is visualized just a quarter of my notebook display. I tryed also to reduce my resolution and to change the resolution of projector, but I obtained no better results. How can I Solve it? On windows all goes well, but I need Ubuntu for personal reasons. Thanks in advance

    Read the article

  • Can't change screen resolution Ubuntu 10.04 (BT)

    - by Universal Coder
    I'm using Backtrack 5 R2 , what is based on Ubuntu 10.04 LTS. It is installed on Samsung Laptop , and default screen resolution in Windows for it is 1366x768 , but BT/Ubuntu Screen Resolution GUI tool (System=Preferences=Monitors) shows that only resolution available is 1024x768 , and called my monitor as "Unknown". Found a solution , that I have to change resolution in /usr/share/xresprobe/xorg.conf , but I did it , logged out/in and restarted many times , but it took me nowhere. Tried with xrandr , but it shows only mentioned 1024x768 as only solution , and when I tried to input needed resolution , but it did not accept it , because it is not available. As much as I googled , there are a lot of people that had similar problems with BT , but most of them solved with VirtualBox additional tools , but it can't help me , because I've installed it as second OS. In one forum read , that same problems is in Ubuntu 12 , so I ask this question here.

    Read the article

  • How can I change resolution of "my video" in Skype?

    - by koushik
    I have a logitech Quickcam Pro 9000 connected to my ubuntu desktop and it works fine with Skype. However, Skype inputs and sends my video at the native (for the webcam I think) resolution of 1600 x 1200. I can confirm that the camera supports a wide variety of resolutions starting from 160 x 120 upto 1600 x 1200 (including e.g., 320 x 240, 352 x 288) using cheese. I can select these resolutions and see the output is appropriately scaled. Also, I don't see any improvements in smoothness of motion in the captured video so I suspect the original 1600 x 1200 is scaled down in the path somewhere. Is it possible to somehow to enable this scaling capability towards Skype?

    Read the article

  • How can I increase resolution when impossible to set up nvidia driver?

    - by Asimov4
    I was stuck at 1024x758 before creating an /etc/X11/xorg.conf file as follows which works well to allow me to have a resolution of 1920x1200 with the vesa driver. Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" EndSubSection EndSection But now my display is kind of slow. I have an NVIDIA GeForce 8600GT but really cannot find how to set up the driver to work. Are there any alternatives to VESA that would work faster?

    Read the article

  • Why Ubuntu always force itself to be in 1440x900 resolution?

    - by rainlover
    My screen's resolution is 1024x768 and when I installed Ubuntu it was forcefully in 1440x900. I changed it in my account and again I've to change it in another standard account. I don't know any way to change it in login screen. Also when shutting down that black screen with some commands also appears in 1440x900. I don't know why Ubuntu force itself to be in 1440x900. I want 1024x768 in whole way. I don't know whether it is required but I have Intel chipset 128 MB.

    Read the article

  • java setting resolution and print size for an Image

    - by Ingrid
    I wrote a program that generates a BufferedImage to be displayed on the screen and then printed. Part of the image includes grid lines that are 1 pixel wide. That is, the line is 1 pixel, with about 10 pixels between lines. Because of screen resolution, the image is displayed much bigger than that, with several pixels for each line. I'd like to draw it smaller, but when I scale the image (either by using Image.getScaledInstance or Graphics2D.scale), I lose significant amounts of detail. I'd like to print the image as well, and am dealing with the same problem. In that case, I am using this code to set the resolution: HashPrintRequestAttributeSet set = new HashPrintRequestAttributeSet(); PrinterResolution pr = new PrinterResolution(250, 250, ResolutionSyntax.DPI); set.add(pr); job.print(set); which works to make the image smaller without losing detail. But the problem is that the image is cut off at the same boundary as if I hadn't set the resolution. I'm also confused because I expected a larger number of DPI to make a smaller image, but it's working the other way. I'm using java 1.6 on Windows 7 with eclipse.

    Read the article

  • 1360x768x32 Resolution in Windows 8 in VirtualBox

    - by mbcrump
    My Lenovo ThinkPad's built-in screen maxes at 1366x768x32. I wanted to use that same resolution with Windows 8 Developer Preview inside of VirtualBox. So, what did I do? Downloaded the latest build of VirtualBox v4.1.6 (because it supports Windows 8 x64) Installed Windows 8 Developer Preview in VirtualBox as I did earlier this year. Installed Guest Additions. Ran the CustomVideoMode described in this blog post. …and quickly found out that I didn’t have the option to use 1366x768x32 inside of VirtualBox despite using the following command: VBoxManage.exe setextradata  "[Virtual Machine Name]" CustomVideoMode1 1920x1080x32   So how do you fix it? If you do a little research on this resolution, then you will find it is a non-standard resolution. Even if you run the command: VBoxManage.exe setextradata "[Virtual Machine Name]" CustomVideoMode1 1366x768x32 It will still not show that resolution inside of VirtualBox. You can fix this easily by using the following command as shown below: VBoxManage.exe setextradata "[Virtual Machine Name]" CustomVideoMode1 1360x768x32 I hope that you noticed the command used the resolution of 1360 instead of 1366. Now if you go to your display option for Windows 8 inside of Virtualbox then you can select that resolution. Anyways, I hope this helps someone with a similar problem. I created this blog partially for myself but it is always nice to help my fellow developer.  Thanks for reading. Subscribe to my feed

    Read the article

  • XDocument.Parse fails due to resolution error, how to disable resolution

    - by Frank Krueger
    I am trying to parse the contents of http://feeds.feedburner.com/riabiz using XDocument.Parse(string) (because it gets cached in a DB.) However, it keeps failing with the below stack trace when it tries to resolve some URIs in that XML. I don't care about validation or any of that XML nonsense, I just want the structure parsed. How can I use XDocument without this URI resolution? System.ArgumentException: The specified path is not of a legal form (empty). at System.IO.Path.InsecureGetFullPath (System.String path) [0x00000] in :0 at System.IO.Path.GetFullPath (System.String path) [0x00000] in :0 at System.Xml.XmlResolver.ResolveUri (System.Uri baseUri, System.String relativeUri) [0x00000] in :0 at System.Xml.XmlUrlResolver.ResolveUri (System.Uri baseUri, System.String relativeUri) [0x00000] in :0 at Mono.Xml2.XmlTextReader.ReadStartTag () [0x00000] in :0 at Mono.Xml2.XmlTextReader.ReadContent () [0x00000] in :0 at Mono.Xml2.XmlTextReader.Read () [0x00000] in :0 at System.Xml.XmlTextReader.Read () [0x00000] in :0 at Mono.Xml.XmlFilterReader.Read () [0x00000] in :0 at Mono.Xml.XmlFilterReader.Read () [0x00000] in :0 at System.Xml.XmlReader.ReadEndElement () [0x00000] in :0 at System.Xml.Linq.XElement.LoadCore (System.Xml.XmlReader r, LoadOptions options) [0x00000] in :0 at System.Xml.Linq.XNode.ReadFrom (System.Xml.XmlReader r, LoadOptions options) [0x00000] in :0 ...

    Read the article

  • Jelly script to reset the issue resolution in JIRA

    - by edlftt
    I am trying to run a jelly script in JIRA to set the resolution to null for all my issues. The following script runs without errors and returns this: <JiraJelly xmlns:jira='jelly:com.atlassian.jira.jelly.JiraTagLib' xmlns:log='jelly:log' xmlns:core='jelly:core' xmlns:jx='jelly:xml' xmlns:util='jelly:util'>org.ofbiz.core.entity.GenericValue.NULL_VALUEorg.ofbiz.core.entity.GenericValue.NULL_VALUEorg.ofbiz.core.entity.GenericValue.NULL_VALUE.... </JiraJelly> Here is the script. <JiraJelly xmlns:jira="jelly:com.atlassian.jira.jelly.JiraTagLib" xmlns:util="jelly:util" xmlns:core="jelly:core" xmlns:jx="jelly:xml" xmlns:log="jelly:log"> <jira:RunSearchRequest var="issues" /> <core:forEach var="genericIssue" items="${issues}"> <core:invokeStatic className="com.atlassian.jira.issue.IssueImpl" method="getIssueObject" var="issue"> <core:arg type="org.ofbiz.core.entity.GenericValue" value="${genericIssue}"/> </core:invokeStatic> <core:invoke on="${issue}" method="setResolution"> <core:arg type="org.ofbiz.core.entity.GenericValue">org.ofbiz.core.entity.GenericValue.NULL_VALUE</core:arg> </core:invoke> </core:forEach> </JiraJelly> Does any one have any idea why this isn't working or have any ideas on how I might set the resolution to nothing? Thank you!!

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >