Search Results

Search found 1263 results on 51 pages for 'unsharp mask'.

Page 10/51 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • Intel 82576 Network card

    - by No1_Melman
    I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

    Read the article

  • how to find and filter blobs from segment image using python?

    - by Python Team
    Am trying to detect number plate from an image.I have converted an image to grayscale and segment image. Now i have to find and filter blobs from an image and to detect number plate from an image. I will explain what i did.. I jus read segment image license_plate = cv2.imread('license1_segmented.png',cv2.CV_LOAD_IMAGE_COLOR) license_plate_size = (license_plate.shape[1], license_plate.shape[0]) mask = cv2.cv.CreateImage (license_plate_size, 8, 1) cv2.cv.Set(mask, 1) thresh_image_ipl = cv2.cv.CreateImage(license_plate_size, cv2.cv.IPL_DEPTH_8U, 1) cv2.cv.SetData(thresh_image_ipl,thresh_image.tostring(),thresh_image.dtype.itemsize * 1 * thresh_image.shape[1]) min_blob_size = 100 # Blob must be 30 px by 30 px max_blob_size = 10000 threshold = 100 **myblobs = CBlobResult(thresh_image_ipl,mask, threshold, True)** myblobs.filter_blobs(min_blob_size, max_blob_size) blob_count = myblobs.GetNumBlobs() trying to find and filter blobs from an image.But am getting error while passing the parameters to CBlobResult which i highlighted above code.I mentioned the error below what i get while passing. Traceback (most recent call last): File "rectdetect1.py", line 110, in <module> myblobs = CBlobResult(thresh_image_ipl,image_area, threshold, True) File "/home/oomsys/pyblobs-read-only/blobs/BlobResult.py", line 92, in __init__ this = _BlobResult.new_CBlobResult(*args) NotImplementedError: Wrong number or type of arguments for overloaded function 'new_CBlobResult'. Possible C/C++ prototypes are: CBlobResult::CBlobResult() CBlobResult::CBlobResult(IplImage *,IplImage *,int,bool) CBlobResult::CBlobResult(CBlobResult const &) Anyone help me to find out the erros and to solve this and all... Thanks in advance...

    Read the article

  • Matching the superclass's constructor's parameter list, is treating a null default value as a non-null value within a constructor a violation of LSP?

    - by Panzercrisis
    I kind of ran into this when messing around with FlashPunk, and I'm going to use it as an example. Essentially the main sprite class is pretty much class Entity. Entity's constructor has four parameters, each with a default value. One of them is graphic, whose default value is null. Entity is designed to be inherited from, with many such subclasses providing their own graphic within their own internal workings. Normally these subclasses would not have graphic in their constructor's parameter lists, but would simply pick something internally and go with it. However I was looking into possibly still adhering to the Liskov Substitution Principal. Which led me to the following example: package com.blank.graphics { import net.flashpunk.*; import net.flashpunk.graphics.Image; public class SpaceGraphic extends Entity { [Embed(source = "../../../../../../assets/spaces/blank.png")] private const BLANK_SPACE:Class; public function SpaceGraphic(x:Number = 0, y:Number = 0, graphic:Graphic = null, mask:Mask = null) { super(x, y, graphic, mask); if (!graphic) { this.graphic = new Image(BLANK_SPACE); } } } } Alright, so now there's a parameter list in the constructor that perfectly matches the one in the super class's constructor. But if the default value for graphic is used, it'll exhibit two different behaviors, depending on whether you're using the subclass or the superclass. In the superclass, there won't be a graphic, but in the subclass, it'll choose the default graphic. Is this a violation of the Liskov Substitution Principal? Does the fact that subclasses are almost intended to use different parameter lists have any bearing on this? Would minimizing the parameter list violate it in a case like this? Thanks.

    Read the article

  • network manager says "device not managed"

    - by Daniella Glover
    I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

    Read the article

  • OpenGL ES rotate texture

    - by 0xSina
    I just got started with OpenGL ES... I have a fragment: const char * sFragment = _STRINGIFY( varying highp vec2 coordinate; precision mediump float; uniform vec4 maskC; uniform float threshold; uniform sampler2D videoframe; uniform sampler2D videosprite; uniform vec4 mask; uniform vec4 maskB; uniform int recording; vec3 normalize(vec3 color, float meanr) { return color*vec3(0.75 + meanr, 1., 1. - meanr); } void main() { float d; float dB; float dC; float meanr; float meanrB; float meanrC; float minD; vec4 pixelColor; vec4 spriteColor; pixelColor = texture2D(videoframe, coordinate); spriteColor = texture2D(videosprite, coordinate); meanr = (pixelColor.r + mask.r)/8.; meanrB = (pixelColor.r + maskB.r)/8.; meanrC = (pixelColor.r + maskC.r)/8.; d = distance(normalize(pixelColor.rgb, meanr), normalize(mask.rgb, meanr)); dB = distance(normalize(pixelColor.rgb, meanrB), normalize(maskB.rgb, meanrB)); dC = distance(normalize(pixelColor.rgb, meanrC), normalize(maskC.rgb, meanrC)); minD = min(d, dB); minD = min(minD, dC); gl_FragColor = spriteColor; if (minD > threshold) { gl_FragColor = pixelColor; } } Now, depending on wether recording is 0 or 1, I want to rotate uniform sampler2D videosprite 180 degrees (reflection in x-axis, flip vertically). How can I do that? I found the function glRotatef(), but how do i specify that I want to rotate video sprite and not videoframe? Thanks

    Read the article

  • Not able to connect to local network

    - by Roopesh
    I have installed Kubuntu , I am able to connect to Internet and able to access external sites, but in my local network i have bugzila installed that i am not able to access, even i am not able to ping the gateway also 192.168.1.1 . below is the result of ifconfig command Please help . Thanks ~# ifconfig eth0 Link encap:Ethernet HWaddr b8:70:f4:da:f9:a8 inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:884 errors:0 dropped:0 overruns:0 frame:0 TX packets:884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:81131 (81.1 KB) TX bytes:81131 (81.1 KB) wlan0 Link encap:Ethernet HWaddr 68:5d:43:2e:1c:79 inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe2e:1c79/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2446 errors:0 dropped:0 overruns:0 frame:0 TX packets:2324 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1909441 (1.9 MB) TX bytes:393292 (393.2 KB)

    Read the article

  • Wifi Hotspot not created in ubuntu 12.04

    - by user2406568
    I am using Hp Pavillion g4 with braodcom wireledd adpater. I have the following hardware configuration, for lan and wifi eth0 Link encap:Ethernet HWaddr 10:1f:74:b2:61:cc inet addr:10.3.10.45 Bcast:10.3.11.255 Mask:255.255.252.0 inet6 addr: fe80::121f:74ff:feb2:61cc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:190855 errors:0 dropped:0 overruns:0 frame:0 TX packets:133209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:77642990 (77.6 MB) TX bytes:25290447 (25.2 MB) Interrupt:44 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 38:59:f9:7d:d6:b2 inet addr:10.3.9.180 Bcast:10.3.11.255 Mask:255.255.252.0 inet6 addr: fe80::3a59:f9ff:fe7d:d6b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:245562 errors:82 dropped:0 overruns:0 frame:408011 TX packets:90383 errors:260 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:140772881 (140.7 MB) TX bytes:13041542 (13.0 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3230 errors:0 dropped:0 overruns:0 frame:0 TX packets:3230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:435198 (435.1 KB) TX bytes:435198 (435.1 KB) whenever I click on create hotspot nothing happens. Any solution???

    Read the article

  • jquery masked input with asp.net control problem

    - by Eyla
    Hi, I have problem while using jquery maskedinput with asp.net textbox. I have a check box that when I check will set a mask to the textbox and when uncheck it change the mask. the problem that when the focus is lost before the mask completed to be filled the text box will empty. how can I fix the problem??? here is my code: <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>Untitled Page</title> <script src="js/jquery-1.4.1.js" type="text/javascript"></script> <script src="js/jquery.maskedinput-1.2.2.js" type="text/javascript"></script> <script type="text/javascript"> function mycheck() { if ($('#<%=chk.ClientID %>').is(':checked')) { $("#<%=txt.ClientID %>").unmask(); $("#<%=txt.ClientID %>").val(""); $("#<%=txt.ClientID %>").mask("999999999999"); } else { $("#<%=txt.ClientID %>").unmask(); $("#<%=txt.ClientID %>").val(""); $("#<%=txt.ClientID %>").mask("(999)999-9999"); } } </script> <style type="text/css"> #form1 { margin-top: 0px; } </style> </head> <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server" /> <div> <p> <asp:CheckBox ID="chk" runat="server" CssClass="kk" onclick="mycheck()" /> </p> <p> <asp:TextBox ID="txt" runat="server" CssClass="tt" ></asp:TextBox> </p> </div> </form> </body> </html>

    Read the article

  • With 2 superposed cameras at different depths and switching their culling masks between layers to implement object-selective antialising:

    - by user36845
    We superposed two cameras, one of which uses AA as post-processing effect (AA filtering is cancelled). The camera with the AA effect has depth 0 and the camera with no effect has depth 1 as can be seen in the 5th and 6th Picture. The objects seen on the left are in layer 1 and the ones on the right are in layer 2. We then wrote a script that switches the culling masks of the cameras between the two layers at the push of buttons 1 and 2 respectively, and accomplishes object-selective antialiasing as seen in the first the three pictures. (The way two cameras separately switch culling masks between layers is illustrated in pictures 7,8 & 9.) HOWEVER, after making the environment 3D (see pictures 1-4), by parenting the 2 cameras under First-Person Controller, we started moving around in the environment and stumbled upon a big issue: When we look at the objects from such an angle as in the 4th Picture and we want to apply antialiasing to the first object (object on the left) which stands closer to our cameras now, the culling mask of 1st camera which is at depth 0, has to be switched to that object’s layer while the second object has to be in the culling mask of the 2nd camera at depth 1. And since the two image outputs of two superposed cameras are laid on top of one another; we obtain the erroneous/unrealistic result of the object farther in the back appearing closer to the camera than the front object (see 4th Picture). We already tried switching depths of cameras so that the 1st camera –with AA- now has depth 1 and the second has depth 0; BUT the camera with the AA effect Works in such a way that it applies the AA effect to its full view. So; the camera with the AA effect always has to remain at the lowest depth and the layer of the object to be antialiased has to be then assigned to the culling mask of the AA camera; otherwise all objects in the AA camera’s view (the two cubes in our case) become antialised, which we don’t want. So; how can we resolve this? The pictures are below and in the comments since each post can have 2 pics: Pic 1. No button is pushed: Both objects seem aliased. Pic 2. Button 1 is pushed: Left (1st) object is antialiased. 2nd object remains aliased. Pic 3. Button 2 is pushed: Right (2nd) object is antialiased. 1st object remains aliased. Pic 4. The problematic result in 3D, when using two superposed cameras with different depths Pic 5. Camera 1’s properties can be seen: using AA post-processing and its depth is 0 Pic 6. Camera 2’s properties can be seen: NOT using AA post-processing and its depth is 1 Pic 7. When no button is pushed, both objects are in the culling mask of Camera 2 and are aliased Pic 8. When pushed 1, camera 1 (bottom) shows the 1st object and camera 2 (top) shows the 2nd Pic 9. When pushed 2, camera 1 (bottom) shows the 2nd object and camera 2 (top) shows the 1st

    Read the article

  • vlans on openvz, centos 6

    - by arheops
    i have centos 6 with openvz installed on it, switch with vlan support. I need following setup: 1) eth0 on openvz have be tagged multiple vlans. 2) each virtualhost have to be in single vlan. yes,i already read wiki on openvz, but it is just not work. I have on main server interface eth0.108 and able ping address on that interface(using nootbook on untagged port vlan 108), but i not able ping address inside container. Main node: [root@box1 conf]# ifconfig eth0 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:506 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:68939 (67.3 KiB) TX bytes:1780 (1.7 KiB) Interrupt:16 Memory:c0000000-c0012800 eth0.108 Link encap:Ethernet HWaddr D0:67:E5:F4:11:60 inet addr:10.11.108.3 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::d267:e5ff:fef4:1160/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:238 errors:0 dropped:0 overruns:0 frame:0 TX packets:19 errors:0 dropped:12 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25890 (25.2 KiB) TX bytes:926 (926.0 b) eth1 Link encap:Ethernet HWaddr D0:67:E5:F4:11:61 inet addr:192.168.23.233 Bcast:192.168.23.255 Mask:255.255.255.0 inet6 addr: fe80::d267:e5ff:fef4:1161/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1967 errors:0 dropped:0 overruns:0 frame:0 TX packets:356 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365298 (356.7 KiB) TX bytes:115007 (112.3 KiB) Interrupt:17 Memory:c2000000-c2012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:784 (784.0 b) TX bytes:784 (784.0 b) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet6 addr: fe80::1/128 Scope:Link UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:3 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) veth108.0 Link encap:Ethernet HWaddr 00:18:51:DA:94:D5 inet6 addr: fe80::218:51ff:feda:94d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:639 errors:0 dropped:0 overruns:0 frame:0 TX packets:5 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17996 (17.5 KiB) TX bytes:308 (308.0 b) virtual node [root@pbx108 /]# ifconfig eth0.108 Link encap:Ethernet HWaddr 00:18:51:CA:B5:C5 inet addr:10.11.108.1 Bcast:10.11.111.255 Mask:255.255.252.0 inet6 addr: fe80::218:51ff:feca:b5c5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:685 errors:0 dropped:2 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:308 (308.0 b) TX bytes:19284 (18.8 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:683 errors:0 dropped:0 overruns:0 frame:0 TX packets:683 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76288 (74.5 KiB) TX bytes:76288 (74.5 KiB) /etc/vz/conf/108.conf # RAM PHYSPAGES="0:4000M" # Swap SWAPPAGES="0:512M" # Disk quota parameters (in form of softlimit:hardlimit) DISKSPACE="200G:200G" DISKINODES="20000000:22000000" QUOTATIME="0" # CPU fair scheduler parameter CPUUNITS="4000" VE_ROOT="/vz/root/$VEID" VE_PRIVATE="/vz/private/$VEID" OSTEMPLATE="centos-6-x86_64" ORIGIN_SAMPLE="vswap-256m" NETIF="ifname=eth0.108,mac=00:18:51:CA:B5:C5,host_ifname=veth108.0,host_mac=00:18:51:DA:94:D5" NAMESERVER="8.8.8.8" HOSTNAME="pbx108.localhost" IP_ADDRESS=""

    Read the article

  • c++ multithread

    - by chnet
    I use C++ to implement a thread class. My code shows in the following. I have a problem about how to access thread data. In the class Thread, I create a thread use pthread_create() function. then it calls EntryPoint() function to start thread created. In the Run function, I want to access the mask variable, it always shows segment fault. So, my question is whether the new created thread copy the data in original class? How to access the thread own data? class Thread { public: int mask; pthread_t thread; Thread( int ); void start(); static void * EntryPoint (void *); void Run(); }; Thread::Thread( int a) { mask =a; } void Thread::Run() { cout<<"thread begin to run" <<endl; cout << mask <<endl; // it always show segmentfault here } void * Thread::EntryPoint(void * pthis) { cout << "entry" <<endl; Thread *pt = (Thread *) pthis; pt->Run(); } void Thread::start() { pthread_create(&thread, NULL, EntryPoint, (void *)ThreadId ); pthread_join(thread, NULL); } int main() { int input_array[8]={3,1,2,5,6,8,7,4}; Thread t1(1); t1.start(); }

    Read the article

  • iPhone OpenGL ES Texture2D Masking

    - by Robert Neagu
    What's the best choice when trying to mask a texture like ColorSplash or other apps like iSteam, etc? I started learning OPENGL ES like... 4 days ago (I'm a total rookie) and tried the following approach: 1) I created a colored texture2D, a grayscale version of the first texture and a third texture2D called mask 2) I also created a texture2D for the brush... which is grayscale and it's opaque (brush = black = 0,0,0,1 and surroundings = white = 1,1,1,1). My intention was to create an antialiased brush with smooth edges but i'm fine with a normal one right now 3) I searched for masking techniques on the internet and found this tutorial ZeusCMD - Design and Development Tutorials : OpenGL ES Programming Tutorials - Masking about masking. The tutorial tells me to use blending to achieve masking... first draw colored, then mask with glBlendFunc(GL_DST_COLOR, GL_ZERO) and then grayscale with glBlendFunc(GL_ONE, GL_ONE) ... and this gives me something close to what i want... but not exactly what i want. The result is masked but it's somehow overbright-ed 4) For drawing to the mask texture i used an extra frame buffer object (FBO) I'm not really happy with the resulting image (overbright-ed picture) nor with the speed achieved with this method. I think the normal way was to draw directly to the grayscale (overlay) texture2D affecting only it's alpha channel in the places where the brush hits. Is there a fast way to achieve this? I have searched a lot and never got an answer that's clear and understandable. Then, in the main draw loop I could only draw the colored texture and then blend the grayscale ontop with glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA). I just want to learn to use OPENGL ES and it's driving me nuts because i can't get it to work properly. An advice, a link to a tutorial would be much appreciated.

    Read the article

  • Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

    - by Nathan Jones
    I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

    Read the article

  • Computer Networks UNISA - Chap 10 &ndash; In Depth TCP/IP Networking

    - by MarkPearl
    After reading this section you should be able to Understand methods of network design unique to TCP/IP networks, including subnetting, CIDR, and address translation Explain the differences between public and private TCP/IP networks Describe protocols used between mail clients and mail servers, including SMTP, POP3, and IMAP4 Employ multiple TCP/IP utilities for network discovery and troubleshooting Designing TCP/IP-Based Networks The following sections explain how network and host information in an IPv4 address can be manipulated to subdivide networks into smaller segments. Subnetting Subnetting separates a network into multiple logically defined segments, or subnets. Networks are commonly subnetted according to geographic locations, departmental boundaries, or technology types. A network administrator might separate traffic to accomplish the following… Enhance security Improve performance Simplify troubleshooting The challenges of Classful Addressing in IPv4 (No subnetting) The simplest type of IPv4 is known as classful addressing (which was the Class A, Class B & Class C network addresses). Classful addressing has the following limitations. Restriction in the number of usable IPv4 addresses (class C would be limited to 254 addresses) Difficult to separate traffic from various parts of a network Because of the above reasons, subnetting was introduced. IPv4 Subnet Masks Subnetting depends on the use of subnet masks to identify how a network is subdivided. A subnet mask indicates where network information is located in an IPv4 address. The 1 in a subnet mask indicates that corresponding bits in the IPv4 address contain network information (likewise 0 indicates the opposite) Each network class is associated with a default subnet mask… Class A = 255.0.0.0 Class B = 255.255.0.0 Class C = 255.255.255.0 An example of calculating  the network ID for a particular device with a subnet mask is shown below.. IP Address = 199.34.89.127 Subnet Mask = 255.255.255.0 Resultant Network ID = 199.34.89.0 IPv4 Subnetting Techniques Subnetting breaks the rules of classful IPv4 addressing. Read page 490 for a detailed explanation Calculating IPv4 Subnets Read page 491 – 494 for an explanation Important… Subnetting only applies to the devices internal to your network. Everything external looks at the class of the IP address instead of the subnet network ID. This way, traffic directed to your network externally still knows where to go, and once it has entered your internal network it can then be prioritized and segmented. CIDR (classless Interdomain Routing) CIDR is also known as classless routing or supernetting. In CIDR conventional network class distinctions do not exist, a subnet boundary can move to the left, therefore generating more usable IP addresses on your network. A subnet created by moving the subnet boundary to the left is known as a supernet. With CIDR also came new shorthand for denoting the position of subnet boundaries known as CIDR notation or slash notation. CIDR notation takes the form of the network ID followed by a forward slash (/) followed by the number of bits that are used for the extended network prefix. To take advantage of classless routing, your networks routers must be able to interpret IP addresses that don;t adhere to conventional network class parameters. Routers that rely on older routing protocols (i.e. RIP) are not capable of interpreting classless IP addresses. Internet Gateways Gateways are a combination of software and hardware that enable two different network segments to exchange data. A gateway facilitates communication between different networks or subnets. Because on device cannot send data directly to a device on another subnet, a gateway must intercede and hand off the information. Every device on a TCP/IP based network has a default gateway (a gateway that first interprets its outbound requests to other subnets, and then interprets its inbound requests from other subnets). The internet contains a vast number of routers and gateways. If each gateway had to track addressing information for every other gateway on the Internet, it would be overtaxed. Instead, each handles only a relatively small amount of addressing information, which it uses to forward data to another gateway that knows more about the data’s destination. The gateways that make up the internet backbone are called core gateways. Address Translation An organizations default gateway can also be used to “hide” the organizations internal IP addresses and keep them from being recognized on a public network. A public network is one that any user may access with little or no restrictions. On private networks, hiding IP addresses allows network managers more flexibility in assigning addresses. Clients behind a gateway may use any IP addressing scheme, regardless of whether it is recognized as legitimate by the Internet authorities but as soon as those devices need to go on the internet, they must have legitimate IP addresses to exchange data. When a clients transmission reaches the default gateway, the gateway opens the IP datagram and replaces the client’s private IP address with an Internet recognized IP address. This process is known as NAT (Network Address Translation). TCP/IP Mail Services All Internet mail services rely on the same principles of mail delivery, storage, and pickup, though they may use different types of software to accomplish these functions. Email servers and clients communicate through special TCP/IP application layer protocols. These protocols, all of which operate on a variety of operating systems are discussed below… SMTP (Simple Mail transfer Protocol) The protocol responsible for moving messages from one mail server to another over TCP/IP based networks. SMTP belongs to the application layer of the ODI model and relies on TCP as its transport protocol. Operates from port 25 on the SMTP server Simple sub-protocol, incapable of doing anything more than transporting mail or holding it in a queue MIME (Multipurpose Internet Mail Extensions) The standard message format specified by SMTP allows for lines that contain no more than 1000 ascii characters meaning if you relied solely on SMTP you would have very short messages and nothing like pictures included in an email. MIME us a standard for encoding and interpreting binary files, images, video, and non-ascii character sets within an email message. MIME identifies each element of a mail message according to content type. MIME does not replace SMTP but works in conjunction with it. Most modern email clients and servers support MIME POP (Post Office Protocol) POP is an application layer protocol used to retrieve messages from a mail server POP3 relies on TCP and operates over port 110 With POP3 mail is delivered and stored on a mail server until it is downloaded by a user Disadvantage of POP3 is that it typically does not allow users to save their messages on the server because of this IMAP is sometimes used IMAP (Internet Message Access Protocol) IMAP is a retrieval protocol that was developed as a more sophisticated alternative to POP3 The single biggest advantage IMAP4 has over POP3 is that users can store messages on the mail server, rather than having to continually download them Users can retrieve all or only a portion of any mail message Users can review their messages and delete them while the messages remain on the server Users can create sophisticated methods of organizing messages on the server Users can share a mailbox in a central location Disadvantages of IMAP are typically related to the fact that it requires more storage space on the server. Additional TCP/IP Utilities Nearly all TCP/IP utilities can be accessed from the command prompt on any type of server or client running TCP/IP. The syntaxt may differ depending on the OS of the client. Below is a list of additional TCP/IP utilities – research their use on your own! Ipconfig (Windows) & Ifconfig (Linux) Netstat Nbtstat Hostname, Host & Nslookup Dig (Linux) Whois (Linux) Traceroute (Tracert) Mtr (my traceroute) Route

    Read the article

  • Why is it 8 here,understanding buffer overflow

    - by Mask
    void function(int a, int b, int c) { char buffer1[5]; char buffer2[10]; int *ret; ret = buffer1 + 12; (*ret) += 8;//why is it 8?? } void main() { int x; x = 0; function(1,2,3); x = 1; printf("%d\n",x); } The above demo is from here: http://insecure.org/stf/smashstack.html But it's not working here: D:\test>gcc -Wall -Wextra hw.cpp && a.exe hw.cpp: In function `void function(int, int, int)': hw.cpp:6: warning: unused variable 'buffer2' hw.cpp: At global scope: hw.cpp:4: warning: unused parameter 'a' hw.cpp:4: warning: unused parameter 'b' hw.cpp:4: warning: unused parameter 'c' 1 And I don't understand why it's 8 though the author thinks: A little math tells us the distance is 8 bytes.

    Read the article

  • How is printf() implemented in c?

    - by Mask
    Disassembling printf doesn't give much info: (gdb) disas printf Dump of assembler code for function printf: 0x00401b38 <printf+0>: jmp *0x405130 0x00401b3e <printf+6>: nop 0x00401b3f <printf+7>: nop End of assembler dump. How is it implemented under the hood? Why disassembling doesn't help? What does * mean before 0x405130?

    Read the article

  • How to write a buffer-overflow exploit in windows XP,x86?

    - by Mask
    void function(int a, int b, int c) { char buffer1[5]; char buffer2[10]; int *ret; ret = buffer1 + 12; (*ret) += 8;//why is it 8?? } void main() { int x; x = 0; function(1,2,3); x = 1; printf("%d\n",x); } The above demo is from here: http://insecure.org/stf/smashstack.html But it's not working here: D:\test>gcc -Wall -Wextra hw.cpp && a.exe hw.cpp: In function `void function(int, int, int)': hw.cpp:6: warning: unused variable 'buffer2' hw.cpp: At global scope: hw.cpp:4: warning: unused parameter 'a' hw.cpp:4: warning: unused parameter 'b' hw.cpp:4: warning: unused parameter 'c' 1 And I don't understand why it's 8 though the author thinks: A little math tells us the distance is 8 bytes. My gdb dump as called: Dump of assembler code for function main: 0x004012ee <main+0>: push %ebp 0x004012ef <main+1>: mov %esp,%ebp 0x004012f1 <main+3>: sub $0x18,%esp 0x004012f4 <main+6>: and $0xfffffff0,%esp 0x004012f7 <main+9>: mov $0x0,%eax 0x004012fc <main+14>: add $0xf,%eax 0x004012ff <main+17>: add $0xf,%eax 0x00401302 <main+20>: shr $0x4,%eax 0x00401305 <main+23>: shl $0x4,%eax 0x00401308 <main+26>: mov %eax,0xfffffff8(%ebp) 0x0040130b <main+29>: mov 0xfffffff8(%ebp),%eax 0x0040130e <main+32>: call 0x401b00 <_alloca> 0x00401313 <main+37>: call 0x4017b0 <__main> 0x00401318 <main+42>: movl $0x0,0xfffffffc(%ebp) 0x0040131f <main+49>: movl $0x3,0x8(%esp) 0x00401327 <main+57>: movl $0x2,0x4(%esp) 0x0040132f <main+65>: movl $0x1,(%esp) 0x00401336 <main+72>: call 0x4012d0 <function> 0x0040133b <main+77>: movl $0x1,0xfffffffc(%ebp) 0x00401342 <main+84>: mov 0xfffffffc(%ebp),%eax 0x00401345 <main+87>: mov %eax,0x4(%esp) 0x00401349 <main+91>: movl $0x403000,(%esp) 0x00401350 <main+98>: call 0x401b60 <printf> 0x00401355 <main+103>: leave 0x00401356 <main+104>: ret 0x00401357 <main+105>: nop 0x00401358 <main+106>: add %al,(%eax) 0x0040135a <main+108>: add %al,(%eax) 0x0040135c <main+110>: add %al,(%eax) 0x0040135e <main+112>: add %al,(%eax) End of assembler dump. Dump of assembler code for function function: 0x004012d0 <function+0>: push %ebp 0x004012d1 <function+1>: mov %esp,%ebp 0x004012d3 <function+3>: sub $0x38,%esp 0x004012d6 <function+6>: lea 0xffffffe8(%ebp),%eax 0x004012d9 <function+9>: add $0xc,%eax 0x004012dc <function+12>: mov %eax,0xffffffd4(%ebp) 0x004012df <function+15>: mov 0xffffffd4(%ebp),%edx 0x004012e2 <function+18>: mov 0xffffffd4(%ebp),%eax 0x004012e5 <function+21>: movzbl (%eax),%eax 0x004012e8 <function+24>: add $0x5,%al 0x004012ea <function+26>: mov %al,(%edx) 0x004012ec <function+28>: leave 0x004012ed <function+29>: ret In my case the distance should be - = 5,right?But it seems not working..

    Read the article

  • How to write a buffer-overflow exploit in GCC,windows XP,x86?

    - by Mask
    void function(int a, int b, int c) { char buffer1[5]; char buffer2[10]; int *ret; ret = buffer1 + 12; (*ret) += 8;//why is it 8?? } void main() { int x; x = 0; function(1,2,3); x = 1; printf("%d\n",x); } The above demo is from here: http://insecure.org/stf/smashstack.html But it's not working here: D:\test>gcc -Wall -Wextra hw.cpp && a.exe hw.cpp: In function `void function(int, int, int)': hw.cpp:6: warning: unused variable 'buffer2' hw.cpp: At global scope: hw.cpp:4: warning: unused parameter 'a' hw.cpp:4: warning: unused parameter 'b' hw.cpp:4: warning: unused parameter 'c' 1 And I don't understand why it's 8 though the author thinks: A little math tells us the distance is 8 bytes. My gdb dump as called: Dump of assembler code for function main: 0x004012ee <main+0>: push %ebp 0x004012ef <main+1>: mov %esp,%ebp 0x004012f1 <main+3>: sub $0x18,%esp 0x004012f4 <main+6>: and $0xfffffff0,%esp 0x004012f7 <main+9>: mov $0x0,%eax 0x004012fc <main+14>: add $0xf,%eax 0x004012ff <main+17>: add $0xf,%eax 0x00401302 <main+20>: shr $0x4,%eax 0x00401305 <main+23>: shl $0x4,%eax 0x00401308 <main+26>: mov %eax,0xfffffff8(%ebp) 0x0040130b <main+29>: mov 0xfffffff8(%ebp),%eax 0x0040130e <main+32>: call 0x401b00 <_alloca> 0x00401313 <main+37>: call 0x4017b0 <__main> 0x00401318 <main+42>: movl $0x0,0xfffffffc(%ebp) 0x0040131f <main+49>: movl $0x3,0x8(%esp) 0x00401327 <main+57>: movl $0x2,0x4(%esp) 0x0040132f <main+65>: movl $0x1,(%esp) 0x00401336 <main+72>: call 0x4012d0 <function> 0x0040133b <main+77>: movl $0x1,0xfffffffc(%ebp) 0x00401342 <main+84>: mov 0xfffffffc(%ebp),%eax 0x00401345 <main+87>: mov %eax,0x4(%esp) 0x00401349 <main+91>: movl $0x403000,(%esp) 0x00401350 <main+98>: call 0x401b60 <printf> 0x00401355 <main+103>: leave 0x00401356 <main+104>: ret 0x00401357 <main+105>: nop 0x00401358 <main+106>: add %al,(%eax) 0x0040135a <main+108>: add %al,(%eax) 0x0040135c <main+110>: add %al,(%eax) 0x0040135e <main+112>: add %al,(%eax) End of assembler dump. Dump of assembler code for function function: 0x004012d0 <function+0>: push %ebp 0x004012d1 <function+1>: mov %esp,%ebp 0x004012d3 <function+3>: sub $0x38,%esp 0x004012d6 <function+6>: lea 0xffffffe8(%ebp),%eax 0x004012d9 <function+9>: add $0xc,%eax 0x004012dc <function+12>: mov %eax,0xffffffd4(%ebp) 0x004012df <function+15>: mov 0xffffffd4(%ebp),%edx 0x004012e2 <function+18>: mov 0xffffffd4(%ebp),%eax 0x004012e5 <function+21>: movzbl (%eax),%eax 0x004012e8 <function+24>: add $0x5,%al 0x004012ea <function+26>: mov %al,(%edx) 0x004012ec <function+28>: leave 0x004012ed <function+29>: ret In my case the distance should be - = 5,right?But it seems not working.. Why function needs 56 bytes for local variables?( sub $0x38,%esp )

    Read the article

  • How is return address specified in stack?

    - by Mask
    This is what I see by disassemble for the statement function(1,2,3);: movl $0x3,0x8(%esp) movl $0x2,0x4(%esp) movl $0x1,(%esp) call 0x4012d0 <_Z8functioniii> It seems the ret address is not pushed into stack at all,then how does ret work?

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >