Search Results

Search found 2466 results on 99 pages for 'vmware vmdk'.

Page 10/99 | < Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >

  • VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

    - by Spirit
    Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

    Read the article

  • VMworkstation Windows 7 vm from physical partition?

    - by rich
    Hi All, i have a machine with 2 disks. my secondary drive has two partitions, one of which is a windows 7 64 boot partition. I have VM workstation and i would like to make a VM from the physical partition (described above). Ideally this would boot from the live disk, but if i can make a vmdk from the two partitions on the secondary drive that would be fine. 1 issue is the drive is 140gig raptor of which the two partitions i want are 40g and 30g partitions. the rest of the space is unallocated. So if i make a vmdk i really need it to be fixed at say 80 gig. I have converter but i don't understand how i can make the vmdk using this... specs Drive 1: this drive is a 120 SSD, running the host OS (Windows 7 64bit) - i've got 95 gigs free on this Drive 2: 140 gig raptor, partition 1 40g is also a windows 7 64bit install, partition 2 is 35 gig with program files folder on it.. sorta of needed to get the vm to work. There is 65gig unallocated on this disk. Drive 1 will host drive 2 as a VM.. my hope.

    Read the article

  • Slow local file transfer (copy) on ESX vmware server?

    - by Sorin Sbarnea
    I have a 8 CPU VmWare ESX server (3.5) with 4 HDD drives in RAID that is not loaded at all. I enabled SSH and installed mc (midnight commander) in order to be able to copy(clone) virtual machines but I observed that if does copy the files very slow - around 3.5mb/s on local drive. Why is this happening and how should I solve the issue?

    Read the article

  • Can't install .NET 4.0 on Windows XP virtual machine! (VMWare Player)

    - by Vercas
    So, every time I try to install .NET Framework 4.0 on my Windows XP Professional SP3 VMWare Player virtual machine, I get a fatal error. It doesn't work with either Windows Update, the Web Installer or the normal installer! I don't know if it matters (AND I HOPE IT DOES NOT), but the host OS's Operating System drive is encrypted, and the VM HDD file resides on that partition. I don't think it matters because other programs can be installed! And downloaded!

    Read the article

  • How To Enlarge a Virtual Machine’s Disk in VirtualBox or VMware

    - by Chris Hoffman
    When you create a virtual hard disk in VirtualBox or VMware, you specify a maximum disk size. If you want more space on your virtual machine’s hard disk later, you’ll have to enlarge the virtual hard disk and partition. Note that you may want to back up your virtual hard disk file before performing these operations – there’s always a chance something can go wrong, so it’s always good to have backups. However, the process worked fine for us. Image Credit: flickrsven How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

    Read the article

  • Installed Ubuntu in VMware Player, Black side bars / broken GUI

    - by Eric
    I recently installed Ubuntu 12.10 in VMware Player and have came up with a black sidebar, missing icons, a pretty broken GUI. Everything works just fine though. I am able to run Firefox and open termainal and all that good stuff just fine, it's just that I can SEE them on the sidebar. I have to open up a seperate window on Windows with a picture of the Ubuntu 12.10 desktop in order for me to know what to click on, but once I do click on it, it's pretty much smooth sailing from there(not counting closing Firefox and several other things). Again, everything works just fine, but when it comes to the sidebar, the GUI, the dashboard (get a completely black screen for when I open dash board), they come up as completely black, broken (visual tears and what not), and hoving over them just brings up a big black bar (assuming it's the "zooming" in of the icon, but it just shows a black bar of where the icon should be). I'm not exactly sure what so do to get this to work (to fix the GUI), any ideas as to what I may do to fix this?

    Read the article

  • Not getting GUI mode on ubuntu 12.04 desktop edition after installation on vmware workstation 7

    - by Salil Naik
    I installed Ubuntu 12.04 desktop edition on my PC using VMWare workstation 7. I assigned 1GB RAM and 20 GB Hard disk to Ubuntu. While starting Ubuntu virtual machine, It is not starting up with GUI mode. In is prompting me my Login ID in textual mode always. After waiting for long time as well the GUI mode is not appearing. I tried running sudo apt-get install updates sudo apt-get install xinit sudo apt-get install ubuntu-desktop Honestly, i don't know the meaning of all these.I am very new to ubuntu.Please help me here what to do? Below is my Laptop configuration OS: Genuine Windows 7 Home Basic(64 bit) RAM: 3 GB Processor: Intel core i3 Regards Salil

    Read the article

  • Vmware 3D Acceleration Ubuntu 14.04

    - by Bowser5543
    I have installed Vmware Player 6.0.3 build-1895310. The problem I have is that when I run a Windows 7 Vm, it says that 3D support was disabled. (I can't read the exact report atm because it has a chance of crashing my machine.) I have the 3D support box enabled. Here is my graphics card: Mobile Intel® GM45 Express Chipset x86/MMX/SSE2. Can anyone tell me to install drivers or something? I can't find mine anywhere!

    Read the article

  • VMware Player and Ubuntu 12.04 - Full Screen

    - by DotNetStudent
    I have installed VMware Player 4.0.2 under Ubuntu 12.04 (Final) and, apart from having to patch the modules, everything went smoothly. However, there's an irritating behavior when toggling full screen mode: toggling full screen (using Virtual Machine Toggle Full Screen or Ctrl + Alt + Return), minimizing the player and maximizing it again changes the resolution of the guest to some strange one and the player gets "nested" between GNOME3's taskbar as every other of Ubuntu's native windows. To switch to full screen again I have to Ctrl + Alt + Return twice. Can anyone please tell me if this is the nromal, expected behavior? Is there any way of "correcting" it? The host operating system is Ubuntu 12.04 (Final) and the guest is Windows 7 (both 64 bits).

    Read the article

  • How Can I Convert A VMware .vmdk File To A .iso File in Windows

    - by Dwayne
    I recently obtained a copy of Mac OS Snow Leopard in VMware (.vmdk) format. It is incredibly slow when running virtualised and I would like to just install it directly to my machine dual booting with Windows 7 (32 bit). Is there any way preferably free that I can convert a VMware .vmdk image to an .iso I can burn to a DVD to boot from? I've seen this done in Linux and presume there is a way to do it in Windows as well. Downloading another copy that isn't a VMware image isn't an option considering my broadband plan is creeping closer to its limit for the month.

    Read the article

  • Extensive use of HDD after VmWare Player virtual machine is closed.

    - by Bobrovsky
    Each time I close virtual machine in VmWare Player I see extensive use of HDD in my system. Basically, whole system becomes unresponsive for about 5-7 minutes. Host system is Windows 7 Utimate x64 SP1 with 6 GB of memory, i3-M350 processor. Virtual machine is Windows XP SP3 x86 (2GB of memory allocated for VM). What can be the cause and what can I do to solve the issue? UPDATE: I am not shutting down the VM, I just close Player window and VM saves it's state. System becomes unresponsive right after VM have saved it state (as indicated by Player) and Player itself have closed.

    Read the article

  • In a virtual machine monitor such as VMware’s ESXi Server, how are shadow page tables implemented?

    - by ali01
    My understanding is that VMMs such as VMware's ESXi Server maintain shadow page tables to map virtual page addresses of guest operating systems directly to machine (hardware) addresses. I've been told that shadow page tables are then used directly by the processor's paging hardware to allow memory access in the VM to execute without translation overhead. I would like to understand a bit more about how the shadow page table mechanism works in a VMM. Is my high level understanding above correct? What kind of data structures are used in the implementation of shadow page tables? What is the flow of control from the guest operating system all the way to the hardware? How are memory access translations made for a guest operating system before its shadow page table is populated? How is page sharing supported? Short of straight up reading the source code of an open source VMM, what resources can I look into to learn more about hardware virtualization?

    Read the article

  • How to run boot loader in VMWare?

    - by Asim Haroon
    I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

    Read the article

  • Static IP Address on Ubuntu 12.04 Virtual Machine

    - by chrisnankervis
    I've setup a VM running Ubuntu 12.04 specifically for local web development and am having some problems ensuring it has a static IP address. A static IP address is important as I'm using the IP address in my hosts file to assign a .local suffix to addresses used both in browser and to connect to the correct database on the VM. Currently, every time I connect to a new network or my VM is assigned a new IP address I need to reconfigure my whole environment which is becoming quite a pain. It also probably doesn't help that the default-lease-time on the Ubuntu VM is set to 1800 by default. At the moment I'm using VMWare Fusion and the Network Adapter is enabled and set to "Autodetect" under Bridged Networking. I've tried to set a static IP address within the dhcpd.conf using the code below: host ubuntu { hardware ethernet 00:50:56:35:0f:f1; fixed-address: 192.168.100.100; } The fixed-address that I've used is also outside the range specified in the subnet block (which in this case is 192.168.100.128 to 192.168.100.254). I've tried adding and removing the network adapter and restarting my Mac after each time to no avail. Below is an ifconfig of the VM that might be of some help: eth0 Link encap:Ethernet HWaddr 00:50:56:35:0f:f1 inet addr:192.168.0.25 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe35:ff1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1624 errors:0 dropped:0 overruns:0 frame:0 TX packets:416 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:147348 (147.3 KB) TX bytes:41756 (41.7 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Are there any specific issues with 12.04 that I'm missing? Otherwise has anyone else got any ideas? Thanks in advance.

    Read the article

  • Setting console resolution in Ubuntu Server 13.10 within VMware

    - by user205625
    I've completed an install of Ubuntu Server 13.10 within VMware and am running into a problem configuring the console (non-graphical) resolution. When I was running Ubuntu Server 13.04, I ran into the same problem... posted the question here, which I later solved by editing /etc/default/grub thus: GRUB_CMDLINE_LINUX_DEFAULT="splash vga=789" I then ran sudo update-grub, sudo reboot and 13.04 stuck in a larger-size console mode... just what I wanted. BUT when I run the same commands in 13.10, during the reboot it changes to the new screen-res, BUT the screen stays black and I can't interact with it. I power down the VM, go back to a previous snapshot, and try again... and again. Since the hwinfo package is no longer available, I can't run sudo hwinfo --framebuffer to see what options are available. Ideas anyone? Here are the uncommented settings in my /etc/default/grub file at this moment: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=lsb_release -i -s 2> /dev/null || echo Debian GRUB_CMDLINE_LINUX_DEFAULT="splash" GRUB_CMDLINE_LINUX="find_preseed=/preseed.cfg" GRUB_DISABLE_LINUX_RECOVERY=false GRUB_GFXMODE=800x600

    Read the article

  • cloning a kvm guest os to a vmdk file

    - by Bond
    I have a production environment where I am having 4 Guest OS running on a Ubuntu server which uses kvm. These OS are in an LVM based setup.I want these Virtual Machines to be in a vmdk format also.Where people would do experiments with these Virtual Machines so this in a vmware environment (or it can be Xen too) would be different from the kvm server.I would not have any control on that other environment so I want to give people vmdk images of these virtual machines. The production Virtual Machines will still keep running on kvm server but the VMs on which experiments would be done would be of type vmdk.(vmdk is a constraint) Here is output of lvscan ACTIVE '/dev/abcd/lvm1' [100.00 GiB] inherit ACTIVE '/dev/abcd/lvm2' [150.00 GiB] inherit ACTIVE '/dev/abcd/lvm3' [50.00 GiB] inherit ACTIVE '/dev/abcd/lvm4' [100.00 GiB] inherit I was reading man page of qemu-img and what I understand is I need to first create a qcow image file which I need to populate and then convert that to a vmdk file. Is that understanding correct? Now suppose /dev/abcd/lvm4 is the virtual machine with which I am going to start this experiment.I can shutdown the production VMs for some time to do this. So is the following way correct to go on server 1 (where kvm is running) qemu-img convert -c -f raw -O vmdk /dev/abcd/lvm4 /backup/lvm4.img or it will affect the lvm4 on kvm server 1. I do not want the VM running on original server to at all loose its any of the content but also have a vmdk file for each of the Guest OS on kvm. Before I proceed with any of the above things on the production machine I just want to make sure that I am doing the correct thing so I asking here.

    Read the article

  • Duplicate ping response when running Ubuntu as virtual machine (VMWare)

    - by Stonerain
    I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

    Read the article

  • EFI VMware Virtual SCSI Hard Drive (0.0) ... unsuccessful

    - by Ravichandra
    I installed the VMware-workstation-full-8.0.0-471780 and created new virtual michin with Mac OSX 10.6.6 with 4GB Ram, 1 Processer, 40GB Hard Disk(SCSI) and General -- Guest Operating system : Apple Mac OS X, Version: Mac OS Server 10.6. when I Power On the the VMWare gives the follwing unsuccessfull comments. -- EFI VMware Virtual SCSI Hard Drive (0.0) ... unsuccessful -- EFI VMware Virtual IDE CDROM Drive (IDE 1.0) ... unsuccessful Could you please help me. how to solve this errors

    Read the article

  • No wireless networks found - BackTrack 5 - Wicd Network Manager - VmWare

    - by litlmike
    I have a Lenovo T500 laptop with an Intel(R) WiFi Link 5100 AGN I have Win 7 Enterprise installed as the OS Inside that Win 7 install, I have installed VmWare Workstation (8.0.0 build-471780) Inside the VmWare, I have installed BackTrack 5 (BT5r1-GNOME-64) Under the VmWare settings, I have Bridged Mode Enabled for the Network Adapter In BT5r1-GNOME-64, under the Wicd Network Manager, it says "No wireless networks found" What do I fix so that it can find the wireless networks? Is the issue with BackTrack, VmWare, etc.?

    Read the article

  • How can I copy a VMware Fusion virtual machine to a FAT32 partition?

    - by Michael Prescott
    I created the virtual machine on a host running OS X. I then moved the machine to a FAT32 partition on an external drive. It moved the first time without error. Then I moved it from the external drive to a host running Ubuntu 9.10. I had to move to a FAT32 partition first because Ubuntu doesn't recognize Mac OS Extended partitions on the drive. So, the virtual machine (vm) ran on the ubuntu host for a while and then I moved it back to the FAT32 partition and from there back to the OS X host. I worked on the vm for a while on the OS X host and then attempted to move it back to the FAT32 partition. I get the following system error: The Finder can’t complete the operation because some data in “my-virtual-machine” can’t be read or written. (Error code -36) Interestingly, I can move the file to another OS X partition, just not FAT32. I also perused VMware's forums and found advice to set permissions on all files and folders to 777. I did this, but have had no success. I notice the the files within the vm package are 777 now, but there is an extended attributes symbol on their permission details "rwxrwxrwx@" Since I can copy the vm between OS X partitions, but not to non OS X partitions, and all files and folders withing the vm package and the package itself have permissions of 777, I speculate that the "@" is the problem. How can I remove the "@" or is there something else I need to modify to allow me to copy/move the vm to other hosts?

    Read the article

  • VMware "boot screen" - add info like contact, phone number, etc.?

    - by TheCleaner
    I've tried searching Google and VMware's KB but maybe I'm not typing the right search criteria...only finding ways to fix problems with booting or screen issues. On the default boot screen of a host it looks similar to this picture from GIS: I'm curious if it is possible somehow to make it look like this instead (adding custom details): I know for the most part the info is "useless" since it is administered remotely, etc. But when I deploy standalone hosts to branch offices, it'd be nice for them to see this type of info on the boot screen. I may also include the VMs hosted on it (again on standalone hosts). Normal monitoring, etc. will be done remotely. This is strictly for odd times when the branch contact may say "the electricians are saying they need to turn off this circuit but I have no idea who to call in IT to tell them this box needs to be shut down" or similar. Anyone who has dealt with small branch offices can tell you that if it isn't labeled they easily forget what it is for and will simply say after the incident "I didn't know what it was or who to call." Possible?

    Read the article

  • conversion of a VMDK image with qemu-img failed with "error while reading sector 131072: Invalid argument"

    - by Erik Sjölund
    I tried to convert a VMDK image found in a OVA file to the QCOW2 format with the qemu-img command but it failed with the error message qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ wget ftp://ftp.sanger.ac.uk/pub/databases/Pfam/vm/PfamWeb_20120124.ova user@ubuntu:/tmp$ tar xfv PfamWeb_20120124.ova PfamWeb_20120124_2.ovf PfamWeb_20120124_2.mf PfamWeb_20120124_2-disk1.vmdk user@ubuntu:/tmp$ qemu-img convert -O qcow2 PfamWeb_20120124_2-disk1.vmdk PfamWeb_20120124_2.qcow2 qemu-img: error while reading sector 131072: Invalid argument user@ubuntu:/tmp$ qemu-img --version | grep "qemu-img version" qemu-img version 1.0, Copyright (c) 2004-2008 Fabrice Bellard user@ubuntu:/tmp$ dpkg-query -f='${Version}\n' --show qemu-utils 1.0+noroms-0ubuntu14.1 user@ubuntu:/tmp$ cat /etc/issue Ubuntu 12.04.1 LTS \n \l How do I avoid the error?

    Read the article

< Previous Page | 6 7 8 9 10 11 12 13 14 15 16 17  | Next Page >