Search Results

Search found 37316 results on 1493 pages for 'model view controller'.

Page 100/1493 | < Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >

  • PC doesn't POST with a certain model of PSU

    - by Core Xii
    I have this PC with an Asus P5N32-E SLI motherboard and an Intel Q6600 CPU. I got a new RX-5300 PSU, but it didn't work. The motherboard power LED is on fine When I switch power on, the PC powers up briefly (0.5-1 sec) then shuts down From there on out when I switch power on, it stays on, all fans and components seem to be receiving power, but the motherboard won't POST. No video output, no PC speaker beeps, nothing If I turn the hard switch on the PSU off and then back on again, go to step 2; The PC turns on and then off immediately again, and on subsequent power-ups it stays on but won't POST I disconnected every component but the motherboard, CPU and PSU. Still nothing. I tried three other models of PSU on this PC, both of higher (600) and lower (<300) wattage than the 530 on the RX-5300 and they all work fine. At this point I was convinced the PSU was faulty so I returned it. When the replacement arrived, it behaved exactly the same. So two different units of RX-5300 both with the same symptoms, neither working with this motherboard + CPU. Yet, three other models of PSU work perfectly fine. The PC store couldn't reproduce my problem with the returned PSU. I tried resetting the CMOS with the jumper. I tried with both the 4 and 4+4 (with and without the extra +4 connected) CPU connectors (curiously the RX-5300 comes equipped with both). Could it be a statistical probability that I get two units of the same model of PSU that are faulty in the exact same manner? Could the RX-5300 model itself be somehow incompatible with this motherboard? I was under the impression that PSUs were pretty much universal so long as you have the wattage. Could the motherboard be broken in some such a way as to work with certain PSUs but not others? What's going on here?

    Read the article

  • Leftover Nav Bar in Landscape View

    - by Rob Bonner
    Hello, I am working to force a view into landscape mode, and have picked up all kinds of cool tips to make this happen, but am stuck on one item that is left on the screen. I have my XIB file laid out in landscape, and in my code I create the view controller normally: RedeemViewController *aViewController = [[RedeemViewController alloc] initWithNibName:@"RedeemViewController" bundle:nil]; aViewController.hidesBottomBarWhenPushed = YES; aViewController.wantsFullScreenLayout = YES; [[self navigationController] pushViewController:aViewController animated:YES]; Inside the controller viewDidLoad I complete the following: [[UIApplication sharedApplication] setStatusBarOrientation:UIInterfaceOrientationLandscapeRight]; [[self navigationController] setNavigationBarHidden:YES animated:YES]; [UIView beginAnimations:@"View Flip" context:nil]; [UIView setAnimationDuration:.75]; [UIView setAnimationCurve:UIViewAnimationCurveEaseInOut]; if (self.interfaceOrientation == UIInterfaceOrientationPortrait) { self.view.transform = CGAffineTransformIdentity; self.view.transform = CGAffineTransformMakeRotation(degreesToRadian(90)); self.view.bounds = CGRectMake(0.0, 0.0, 480, 320); } [UIView commitAnimations]; What I end up with is a perfectly rotated view, with a grey vertical bar on the left side (see pic). So to the question, how do I get rid of the bar? Edit: I am pretty sure this is the navigation bar that is not being hidden. This is a duplicate of another post, with some modified code, the other question was being answered with the bug.

    Read the article

  • Accessing a nested hash in a controller

    - by Magicked
    I have the following (snipped) parameters passed into my controller. Parameters: {"commit"=>"OK", "action"=>"set_incident_incident_status_id", "id"=>"1", "controller"=>"incidents", "incident"=>{"incident_status_id"=>"1"}} I know that if I want to select the incident, I can do: @incident = Incident.find(params[:id]) How do I access the "incident"={"incident_status_id"="1"}? I thought to try something like: @incident_status = IncidentStatus.find(params[:incident => :incident_status_id]) But that didn't work. I'm assuming it's just a syntax problem at this point, and I haven't found a solution yet. Any help would be much appreciated!

    Read the article

  • Rails Variable across all controller actions

    - by bob
    Hello, This should be a very simple rails question. I have a variable like the following. @administration = Administration.first I want this variable to be accessible through every controller action across all my controllers so for example if I have a Product controller and inside of it I have the usual CRUD actions, I want the @administration variable as defined above to be put into all the CRUD actions. (It would not be needed in destroy or create or update). I have many controllers throughout my project and I was wondering if there is an easier way than adding it manually through all of the actions that I want it in. I tried a global variable $administration = Administration.first but I run into an issue where it is not updated when I update the actual content of the Administration.first table. Also, I would like to avoid global variables. Any help would be much appreciated. Thanks! :)

    Read the article

  • MVC Pass textbox to controller if not in a form tag

    - by user1679820
    I am working on and Microsoft MVC3 project and cannot pass a parameter which has been edited to the controller. It will only pass back the original set parameter For example: @Ajax.ActionLink("share file", InviteController.Actions.Result, InviteController.Name, new { message = Model.Message }, new AjaxOptions { HttpMethod = "GET", UpdateTargetId = "popup", OnSuccess = "$('#popup').dialog('open')" }, new { id = "popup-button" }) <label>Personal Message <span class="optional-message">(optional)</span></label> @Html.TextAreaFor(x => x.Message) </div> This will pass the to the following controller but the 'message' parameter has the original message and not the updated message: public ActionResult Result(FormCollection coll, string message) { I'd love if someone could give me some advice. Many Thanks

    Read the article

  • Rails has_one vs belongs_to semantics

    - by Anurag
    I have a model representing a Content item that contains some images. The number of images are fixed as these image references are very specific to the content. For example, the Content model refers to the Image model twice (profile image, and background image). I am trying to avoid a generic has_many, and sticking to multiple has_one's. The current database structure looks like: contents - id:integer - integer:profile_image_id - integer:background_image_id images - integer:id - string:filename - integer:content_id I just can't figure out how to setup the associations correctly here. The Content model could contain two belongs_to references to an Image, but that doesn't seem semantically right cause ideally an image belongs to the content, or in other words, the content has two images. This is the best I could think of (by breaking the semantics): class Content belongs_to :profile_image, :class_name => 'Image', :foreign_key => 'profile_image_id' belongs_to :background_image, :class_name => 'Image', :foreign_key => 'background_image_id' end Am I way off, and there a better way to achieve this association?

    Read the article

  • Performance when querying a View

    - by Nate Bross
    I'm wondering if this is a bad practice or if in general this is the correct approach. Lets say that I've created a view that combines a few attributes from a few tables. My question, what do I need to do so I can query against this view as if it were a table without worrying about performance? All attributes in the original tables are indexed, my concern is that the result view will have hundreds of thousands of records, which I will want to narrow down quite a bit based on user input. What I'd like to avoid, is having multiple versions of the code that generates this view floating around with a few extra "where" conditions to facilitate the user input filtering. For example, assume my view has this header VIEW(Name, Type, DateEntered) this may have 100,000+ rows (possibly millions). I'd like to be able to make this view in SQL Server, and then in my application write querlies like this: SELECT Name, Type, DateEntered FROM MyView WHERE DateEntered BETWEEN @date1 and @date2; Basically, I am denormalizing my data for a series of reports that need to be run, and I'd like to centralize where I pull the data from, maybe I'm not looking at this problem from the right angle though, so I'm open to alternative ways to attack this.

    Read the article

  • jQuery ajax Data Sent to Controller are Empty only in IE

    - by saman gholami
    This is my jQuery code : $.ajax({ url: "/Ajax/GetConcertTime", type: "POST", cache: false, data: { concertID: concertID.replace("ct", ""), date: selectedDateValue }, success: function (dataFromServer) { //some codes ... }, error: function (a, b, c) { alert(c); } }); And this is my controller code for catching parameters : [HttpPost] public ActionResult GetConcertTime(string concertId, string date) { int cid = Convert.ToInt32(concertId); try { MelliConcertEntities db = new MelliConcertEntities(); var lst = (from x in db.Showtimes where x.Concert.ID == cid && x.ShowtimeDate.Equals(date) && x.IsActive == true select x.ShowtimeTime).Distinct().ToList(); JavaScriptSerializer js = new JavaScriptSerializer(); return Content(js.Serialize(lst)); } catch (Exception ex) { return Content(ex.Message); } } After debugging i know the parameters in Controller (concertId and date) are empty when i useing IE browser.but in other browser it's work properly. What should i do for this issue?

    Read the article

  • Instantiating and referencing models in MVC

    - by fig-gnuton
    In MVC, should each model be a globally accessible singleton accessible to any view/controller? Or should the models be singletons that are dependency injected into any component that requires them? Or should a new model instance be created for each component that needs one, in which case events would be used to propagate changes across model instances of the same class?

    Read the article

  • NSTableView doesn't populate with array objects until a new object is added via the controller

    - by Luke
    I have an NSTableView and an array controller set up as shown here, using cocoa bindings: https://developer.apple.com/library/mac/documentation/Cocoa/Conceptual/TableView/PopulatingViewTablesWithBindings/PopulatingView-TablesWithBindings.html#//apple_ref/doc/uid/10000026i-CH13-SW3 In my app delegate during applicationDidFinishLaunching I have the following snippet in here, initialising the array and filling it with objects array = [[NSMutableArray alloc] init]; SomeObject* foo = [[Object alloc] init]; foo.text = @"sup"; [array addObject:foo]; //Repeat this a few times However, when I build the app and run it I end up with an empty table. However, if I bind a button to the array controller's add: input and click it during runtime (this adds a new object to the array and table) then the table will show the new object first, with the objects added during applicationDidFinishLaunching following it. Why does this happen? And is there a way to make my table populate without having to add an element first?

    Read the article

  • Rails - How to connect Helper to Controller Module

    - by red eye
    I have helper: module BreadcrumbsHelper def breadcrumbs_cache_wrap(key, options, &block) ... end end And i extract part of Controller to module: module ApplicationController::Breadcrumbs def default_breadcrumbs ... end class ApplicationController include ApplicationController::Breadcrumbs ... end Now i want to connect Helper to Controller. I can do it like this: class ApplicationController include ApplicationController::Breadcrumbs helper :breadcrumbs ... end It's working. But can i incapsulate connection to Breadcrumbs Module? module ApplicationController::Breadcrumbs helper :breadcrumbs ... end Unfortunately this code is not working "undefined method `helper'".

    Read the article

  • One model and Many edit views

    - by user179438
    Hi, I have a model I named User, and I want use two different Views to edit it: the usual edit view and another view I called edit_profile. I had no problem in creating routing, controller and views: I added edit_profile and update_profile views, and I added on routes.rb the line: map.resources :users ,:member => {:edit_profile => :get, :update_profile => :put} The problem is: when I submit the form in edit_profile and some error occur in some input fields, rails reload the edit_path page instead of edit_profile_path page ! This is the form on edit_profile.html.erb form_for(:user, @user, :url => {:action => :update_profile}, :html => { :method => :put} ) do |f| = f.text_field :description = f.text_area :description = f.error_message_on :description .... .... = f.submit 'Update profile' After clicking Update profile, if input errors occur I want to show edit_profile view instead of edit view Do You have some ideas ? many thanks

    Read the article

  • Accessing two sides of a user-user relationship in rails

    - by Lowgain
    Basically, I have a users model in my rails app, and a fanship model, to facilitate the ability for users to become 'fans' of each other. In my user model, I have: has_many :fanships has_many :fanofs, :through => :fanships In my fanship model, I have: belongs_to :user belongs_to :fanof, :class_name => "User", :foreign_key => "fanof_id" My fanship table basically consists of :id, :user_id and :fanof_id. This all works fine, and I can see what users a specific user is a fan of like: <% @user.fanofs.each do |fan| %> #things <% end %> My question is, how can I get a list of the users that are a fan of this specific user? I'd like it if I could just have something like @user.fans, but if that isn't possible what is the most efficient way of going about this? Thanks!

    Read the article

  • Deleted nib still displayed when controller is pushed

    - by yahuie
    I have an application with a UINavcontroller under a tab bar controller. To create the navigation model I want, I push a container UIView object onto the stack to manage additional views(Thanks Frank). When I created the container class, an associated nib file was created along with it. I at first used that nib file, but it turned out it was better not to. So I deleted the nib (and selected 'also move to trash'). The problem is that it still shows up when I push its view controller onto the stack. I have tried emptying the cache in xcode and restarting xcode. What am I missing?

    Read the article

  • Overriding Magento Admin Controller, for Beginners

    - by Knowledge Craving
    In the Magento Admin section, I want to override the "Sales/Order/ShipmentController.php" controller file of the core Mage. I have tried rewriting the URL, using the "from" & "to" tags, but in vain. I don't know what is the actual & correct way of doing this, as I'm a newbie in Magento. Please anybody provide some good fundamental & correct answer, so that at least the concept gets clear. Also, if possible, please tell me, what is the actual purpose of the controller, for both the frontend & the back-end? Any help is greatly appreciated.

    Read the article

  • How to connect Model through Controller to View using bindings?

    - by Paperflyer
    I have an NSTextField in my view. Its value is bound to an NSNumber *number in my controller. The controller simply calls through to the model (value) to get the appropriate value. // In the controller - (NSNumber *)number { return [NSNumber numberWithFloat:[model value]]; } - (void)setNumber:(NSNumber *)aNumber { [model setValue:[aNumber floatValue]]; } This is fine, only the controller is not notified of model changes and thus, changing the value in the model does not update the NSTextField. The only other option I can think of is to have the model notify the controller and the controller manually update the view through an Outlet. But this circumvents the binding. // In the model, after value change [[NSNotificationCenter defaultCenter] postNotificationName:@"ValueChanged" object:self]; // In the controller, after being notified - (void)updateView:(NSNotification *)aNotification { [myTextField setFloatValue:[model value]]; } Is there a better, binding-aware way to implement this communication?

    Read the article

  • case sensititivity with users controller on certain hosting

    - by Leo
    We generally use two different hosting services. On one, everything works ticketyboo, as it does on my local dev servers. On the other server, however, I am having this problem: I can't access the users controller like this: http://www.example.com/users/login But I can like this: http://www.example.com/Users/login ** note the capitalised 'Users' ** If I displace the application to a sub-folder everything works fine (both upper- and lowercase). The hosting company have looked at it and can't see a problem at their end and they assure me that users is not a reserved word. You might say this isn't a problem, just use the version that works. Unfortunately it leads to problems downstream where Cake core starts generating urls itself. Anybody else seen this problem or know the solution? [This only occurs on the users controller - all others work as expected]

    Read the article

  • Joining the same model twice in a clean way, but making the code reusable

    - by Shako
    I have a model Painting which has a Paintingtitle in each language and a Paintingdescription in each language: class Painting < ActiveRecord::Base has_many :paintingtitles, :dependent => :destroy has_many :paintingdescriptions, :dependent => :destroy end class Paintingtitle < ActiveRecord::Base belongs_to :painting belongs_to :language end class Paintingdescription < ActiveRecord::Base belongs_to :painting belongs_to :language end class Language < ActiveRecord::Base has_many :paintingtitles, :dependent => :nullify has_many :paintingdescriptions, :dependent => :nullify has_many :paintings, :through => :paintingtitles end As you might notice, I reference the Language model from my Painting model via both the Paintingtitle model and Paintingdescription model. This works for me when getting a list of paintings with their title and description in a specific language: cond = {"paintingdescription_languages.code" => language_code, "paintingtitle_languages.code" => language_code} cond['paintings.publish'] = 1 unless admin paginate( :all, :select => ["paintings.id, paintings.publish, paintings.photo_file_name, paintingtitles.title, paintingdescriptions.description"], :joins => " INNER JOIN paintingdescriptions ON (paintings.id = paintingdescriptions.painting_id) INNER JOIN paintingtitles ON (paintings.id = paintingtitles.painting_id) INNER JOIN languages paintingdescription_languages ON (paintingdescription_languages.id = paintingdescriptions.language_id) INNER JOIN languages paintingtitle_languages ON (paintingtitle_languages.id = paintingtitles.language_id) ", :conditions => cond, :page => page, :per_page => APP_CONFIG['per_page'], :order => "id DESC" ) Now I wonder if this is a correct way of doing this. I need to fetch paintings with their title and description in different functions, but I don't want to specify this long join statement each time. Is there a cleaner way, for instance making use of the has_many through? e.g. has_many :paintingdescription_languages, :through => :paintingdescriptions, :source => :language has_many :paintingtitle_languages, :through => :paintingtitles, :source => :language But if I implement above 2 lines together with the following ones, then only paintingtitles are filtered by language, and not the paintingdescriptions: cond = {"languages.code" => language_code} cond['paintings.publish'] = 1 unless admin paginate( :all, :select => ["paintings.id, paintings.publish, paintings.photo_file_name, paintingtitles.title, paintingdescriptions.description"], :joins => [:paintingdescription_languages, :paintingtitle_languages], :conditions => cond, :page => page, :per_page => APP_CONFIG['per_page'], :order => "id DESC" )

    Read the article

  • Getting an Ajax response from Zend Framework Controller

    - by JavaLava
    I'm doing an Ajax request on one of my views to a Controller but I am unable to send back a response to the Ajax method. In the snippet below, I am trying to send the word 'hellopanda' back but in the alert message, I'll get data as an object. View : $.ajax({ type: "POST", url: "localhost/some-activity", data: dataString, success: function(data) { alert( "Data is: " + data); //do something with data }, error: function(data){ alert( "Data is: " + data); //do something with data }, onComplete: function(){ } }); Controller: public function someActivityAction(){ //do stuff echo "hellopanda"; } I'm pretty sure the echo is the problem. Any insights on to how to do a proper response to the view would be greatly appreciated.

    Read the article

  • How to reference filtered ng-repeat items from a controller in AngularJS

    - by ParkerDigital
    I have some JSON data that is rendered out via the ng-repeat directive, and the results are then filtered via some checkboxes/drop-downs, and some custom filter functions in my controller. I now want to add a function to my controller that is triggered by an 'ng-change' on some of the checkboxes, that can reference the current list of items in my 'ng-repeat'. I realise I can reference these values from a custom filter, for example $scope.filterProvider = function(item), but this function is then called for each and every item in the ng-repeat, which isn't what I want - I want the function to just be called each time a checkbox is checked/unchecked, and I need that function to be able to reference the items in my ng-repeat...does that make sense to anyone?! And if so, does anyone know how I can do that? Thanks :-)

    Read the article

  • View Mobile Websites in Windows with Safari 4 Developer Tools

    - by Matthew Guay
    Want to try out mobile websites designed for the iPhone and other mobile devices on your PC?  Safari 4 for Windows lets you do this easily with their developer tools. By default, Safari will show standard desktop websites.  But by making a simple change, you can switch it to work like Safari Mobile on the iPhone or iPod Touch. Getting Started First make sure you have Safari 4 for Windows installed.  You can download Safari directly (link below) and install it as usual.   Or if you already have another Apple program installed, such as QuickTime or iTunes, then you can install it from Apple Software update.  Simply enter apple software update in the Start menu search box. And then select Safari 4 from the list of new software available.  Click Install to automatically download and install Safari. Accept the license Agreement, and then Safari will automatically install. Once this is finished, Safari will be ready to use. View Mobile Sites in Safari First, we need to enable the developer tools.  Click the gear icon on the toolbar, and select Preferences. Click the Advanced tab, and then check the box that says “Show Develop menu in menu bar”. Once you’ve closed your settings box, click the page icon, select Develop, then User Agent, and then choose one of the Mobile Safari settings.  In our test we chose Mobile Safari 3.1.2 – iPhone. To make your browser emulate a mobile device better, you can hide the bookmarks and tab bar to have a more streamlined interface. Click the Gear icon, and select “Hide Bookmarks Bar”, and then repeat and click “Hide Tab Bar”. You can also shrink your window to be closer to the size of a mobile device screen.  Once you’ve done these things, Safari should look similar to this screenshot.  Here we have loaded Google.com, and you can see it in its iPhone-style interface. Simply enter any website into the address bar, and it will load in its mobile interface if it has one.  Here is Google’s other mobile offerings, right inside Windows. Gmail loads messages with the default iPhone interface. One especially interesting mobile site is Apple’s online iPhone User Guide.  When loaded in Safari with the iPhone setting, it loads with a very nice mobile UI that works just like an iPhone app.  In fact, you can even click and drag to scroll, just like you would with your finger on an iPhone. Conclusion Even if you do not have a Smartphone, you can still preview what websites will look like on them with this trick. Not all sites will work of course, but it’s fun to play around with different sites that have mobile versions. Links: Safari 4 Download Apple iPhone online user guide Similar Articles Productive Geek Tips Make Safari Stop Crashing Every 20 Seconds on Windows VistaCustomize Safari for Windows ToolbarSave Screen Space by Hiding the Bookmarks Toolbar in Safari for WindowsEdit Text in a Webpage with Internet Explorer 8Keep Websites From Using Tiny Fonts in Safari TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet

    Read the article

  • How do i mount my SD Card? I am using ubuntu 10.04

    - by shobhit
    root@shobhit:/media# lsusb Bus 002 Device 017: ID 14cd:125c Super Top Bus 002 Device 003: ID 0c45:6421 Microdia Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 011: ID 413c:8160 Dell Computer Corp. Bus 001 Device 006: ID 413c:8162 Dell Computer Corp. Bus 001 Device 005: ID 413c:8161 Dell Computer Corp. Bus 001 Device 004: ID 138a:0008 DigitalPersona, Inc Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lspci -v -nn 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fbc08000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbc07000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=20, subordinate=20, sec-latency=32 Capabilities: [50] Subsystem: Dell Device [1028:0441] 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01) Subsystem: Dell Device [1028:0441] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at fbc06000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Dell Device [1028:0441] Flags: medium devsel, IRQ 3 Memory at fbc05000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at fbc04000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- 12:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Subsystem: Dell Device [1028:0010] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number cb-c0-8b-ff-ff-38-00-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl 13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 28 I/O ports at e000 [size=256] Memory at d0b04000 (64-bit, prefetchable) [size=4K] Memory at d0b00000 (64-bit, prefetchable) [size=16K] Expansion ROM at fba00000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03 Kernel driver in use: r8169 Kernel modules: r8169 root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lshw shobhit description: Portable Computer product: Vostro 3500 vendor: Dell Inc. version: A10 serial: FV1L3N1 width: 32 bits capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp configuration: boot=normal chassis=portable cpus=2 uuid=44454C4C-5600-1031-804C-C6C04F334E31 *-core description: Motherboard product: 0G2R51 vendor: Dell Inc. physical id: 0 version: A10 serial: .FV1L3N1.CN7016612H00PW. slot: To Be Filled By O.E.M. *-cpu:0 description: CPU product: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 slot: CPU 1 size: 1197MHz capacity: 2926MHz width: 64 bits clock: 533MHz capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: id=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 3MiB capacity: 3MiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 4.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 width: 64 bits capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 width: 64 bits capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 width: 64 bits capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 width: 64 bits capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 width: 64 bits capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 width: 64 bits capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a width: 64 bits capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b width: 64 bits capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c width: 64 bits capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d width: 64 bits capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e width: 64 bits capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f width: 64 bits capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 3GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT112S6TFR8C-H9 vendor: AD80 physical id: 0 serial: 5525C935 slot: DIMM_A size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT125S6TFR8C-H9 vendor: AD80 physical id: 1 serial: 3441D6CA slot: DIMM_B size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A10 (10/25/2010) size: 64KiB capacity: 1984KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 size: 1197MHz capacity: 1197MHz capabilities: vmx ht cpufreq configuration: id=4 *-logicalcpu:0 description: Logical CPU physical id: 4.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 capabilities: logical *-pci description: Host bridge product: Core Processor DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 18 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: msi pm bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:30 memory:fac00000-faffffff memory:c0000000-cfffffff(prefetchable) ioport:f080(size=8) *-communication UNCLAIMED description: Communication controller product: 5 Series/3400 Series Chipset HECI Controller vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc09000-fbc0900f *-usb:0 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fbc08000-fbc083ff *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:22 memory:fbc00000-fbc03fff *-pci:0 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:24 ioport:2000(size=4096) memory:bc000000-bc1fffff memory:bc200000-bc3fffff(prefetchable) *-pci:1 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:25 ioport:3000(size=4096) memory:fbb00000-fbbfffff memory:bc400000-bc5fffff(prefetchable) *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:8b:aa:d8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=10.0.1.50 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbb00000-fbb03fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:26 ioport:e000(size=4096) memory:fba00000-fbafffff ioport:d0b00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 03 serial: 78:2b:cb:cc:0e:2a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:28 ioport:e000(size=256) memory:d0b04000-d0b04fff(prefetchable) memory:d0b00000-d0b03fff(prefetchable) memory:fba00000-fba1ffff(prefetchable) *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:27 ioport:d000(size=4096) memory:fb000000-fb9fffff ioport:d0000000(size=10485760) *-usb:1 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fbc07000-fbc073ff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a6 width: 32 bits clock: 33MHz capabilities: pci bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 06 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 06 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:29 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fbc06000-fbc067ff *-disk description: ATA Disk product: WDC WD3200BEKT-7 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21AC0W1945 size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=77e3ed41 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: aa69-51c0 size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-04-03 02:00:15 filesystem=ntfs label=System Reserved state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 9854ff5c-1dea-a147-84a6-624e758f44b8 size: 48GiB capacity: 48GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-10 13:55:31 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:2 description: Extended partition physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 size: 48GiB capacity: 48GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 1952MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/56AA8094AA807273 version: 3.1 serial: 22a29e8d-56c7-9a4a-adea-528103948f6d size: 200GiB capacity: 200GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-02 20:17:15 filesystem=ntfs modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-cdrom description: DVD-RAM writer product: DVD+-RW TS-L633J vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: D200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 06 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fbc05000-fbc050ff ioport:f000(size=32) *-generic UNCLAIMED description: Signal processing controller product: 5 Series/3400 Series Chipset Thermal Subsystem vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc04000-fbc04fff *-scsi physical id: 2 bus info: usb@2:1.1 logical name: scsi15 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@15:0.0.0 logical name: /dev/sdb I have tried all options like fdisk /dev/sdb , pmount /dev/sdb but nothing is working .Pls guide me

    Read the article

< Previous Page | 96 97 98 99 100 101 102 103 104 105 106 107  | Next Page >