Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 1018/1173 | < Previous Page | 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025  | Next Page >

• Mapped network drive connection timeout

  - by Terix

  I have server "Alpha" and server "Beta". Server Beta has a shared folder, that is mapped on server Alpha as "X:" On server Alpha there is a .vbs script that runs and take some files on local drive and copy them on X: drive. My issue is if no user log on server Alpha for a long time, it seems like the tcp connection underneath the mapped drive has a timeout, and the vbs script fails on the copy of file. As soon I log with remote desktop on Alpha server, the .vbs is successfull on the copy of the files. I have made many tests, using file logs to check what was happening and I found no way to refresh the connection and let the .vbs be able to copy files unattended.. I have always to log with remote desktop on Alpha server to refresh the connection and let the .vbs copy the files without issues. What can I do to avoid to log every time? The .vbs script runs 3 times a day and is very annoying. I do not have control over server Beta so I cannot change anything there, and I am very limited on changes I can do on server Alpha ( I cannot change registry and that sort of things)

  Read the article

• Virus cleanup; Windows Automatic Updates service crashes in esent.dll

  - by quack quixote

  Background I'm doing system recovery on an old WinXP SP1 system brought to me on suspicion of virus infection. After taking preliminary backups, I used MalwareBytes to detect and clean the infection. I might've even gotten it all. In the process, I've discovered (a) the system drive is showing signs of impending failure, and (b) the owner has been using the system's old crusty IE-6 instead of the up-to-date Firefox I've provided for him. So naturally, thinking I had a relatively stable system, I tried to hit the Windows Update site to install IE-8, in case further training doesn't stick. The update site told me it needed to update the installer, and I started that process. Soon after, wuauclt.exe started crashing, reporting addresses in module esent.dll. There's a Microsoft KB (910437) on a problem with that DLL, so I downloaded the hotfix and installed. The crashing did not stop. I attempted to install SP3 from the offline installer, but that didn't fix the issue either. The system is reporting a few hard drive / IDE controller errors, but they don't correlate to the crashes, so they aren't the direct cause. I've also attempted to rollback to the time between the infection removal and the first crashes, but that doesn't help. Question The hotfix I tried to install dealt with problem in transaction logs of the Extensible Storage Engine (ESE) database. I suspect this issue is similar, but that the database itself (whatever the ESE database is) is corrupted. Is there a way to clean or clear this database so that system operation returns to normal? Can someone enlighten me as to what the ESE database actually is, and where it resides? Can I just locate some files and delete them to bring this under control?

  Read the article

• Denying access to website via htaccess based on http header

  - by neekster

  I've been trying for ages to get this to work and I can't put my finger on it. What I'm trying to do is block access to a site from a number of countries, based on the CF-IPCountry header added by CloudFlare. I figured htaccess was a suitable way to do this. We are running LiteSpeed 4.2.4 on top of DirectAdmin for a control panel. The problem we having is the htaccess rule doesn't seem to do anything. Here's the rule we tried: SetEnvIf CF-IPCountry AU UnwantedCountry=1 Order allow,deny Deny from env=UnwantedCountry Allow from all That makes no difference at all, connections are still accepted. Just to check that the rule was at least being processed, I changed Allow from all to Deny from all, and connections were refused. So it appears to be a problem wit the variable. Here's the relevant headers that come in with the request. Connection: Keep-Alive Accept-Encoding: gzip CF-Connecting-IP: xx.xx.xx.xx CF-IPCountry: AU X-Forwarded-For: xx.xx.xx.xx.xx CF-RAY: c9062956e2d04b6 X-Forwarded-Proto: http CF-Visitor: {"scheme":"http"} Zone-Name: xx.com.au Hopefully someone can help me out, this has been driving me nuts for too long. Thanks

  Read the article

• Using VMware Guest OS to enable Host OS to ssh to remote network

  - by Reuben L.

  Basically I have an issue because my host OS is 64-bit Linux Mint (Ubuntu derived) and it doesn't seem to be compatible with the Juniper Network Connect that is used by the network at my workplace. Thus, I am unable to ssh from terminal to the network. I can't make changes to the workplace network either so that leaves me with looking for solutions on my end. The main reason for me to access the network from home is to check on my running processes or to issue more commands to a few workstations. Putty is the desperate choice I usually make but it means I have to reboot to Windows and also have limited control. I've tried several other methods and they have all failed. Recently, I setup a VM with Windows 7 as the guest OS. Now half my problems are fixed as I don't have to physically reboot the system - I just have to engage Juniper Network Connect on the VM. However, I would still like to use my Linux terminal to ssh to the network. It sounds plausible that I could somehow manipulate ports to connect to the remote network from the host OS tunneled through the guest OS, but I really have no clue how to do so... Can anyone help?

  Read the article

• Wirelss card not being detected in backtrack 5

  - by Jesse Nelson

  I just installed backtrack 5 and I am unable to detect my wireless card. iwconfig doesn't list my interface. I can see that the hardware is present in lspci -vnn (see below) but I can't get the interface detected. I have tried to reinstall the compat-wireless package but I get errors during the build (see below) I have done a ton of researching and I keep hitting a brick wall, mostly because the wiki for backtrack is down and I can't find any good resources. Does anyone know how to fix the issue? Also, does anyone no how I can scan the hardware to determine what NIC is assigning my interface? If I can figure out the interface name I think I can set it up manually by putting up the link and using wireless-tools to manually configure the connection, this is what I had to do in arch on my mac. As stated the wiki for backtrack is down and I can't find any help on the issue. I tried to do the full kernel upgrade suggested in my software update but after the update was complete and I logged back in I had a new log in manager and the only thing I was able to log into was window managers. However, after this update my wireless was working fine. Please help I am new to Linux and the wiki is down, I have nowhere else to turn. Forgot to mention I am using the KDE version, not Gnome. Thanks in advance for any help or support. Attempt at make: root@bt:/usr/src/compat-wireless-3.3-rc1-2# make /usr/src/compat-wireless-3.3-rc1-2/config.mk:254: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m." make -C /lib/modules/2.6.38/build M=/usr/src/compat-wireless-3.3-rc1-2 modules make: *** /lib/modules/2.6.38/build: No such file or directory. Stop. make: *** [modules] Error 2 lspci output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn -i net lspci: I/O error at net, line 0 root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn 02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:0032] (rev ff) (prog-if ff) !!! Unknown header type 7f ( This is the problem but I can't find the solution) Kernel modules: ath9k iwconfig output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# iwconfig lo no wireless extensions. eth0 no wireless extensions.

  Read the article

• Having trouble keeping a 1GB RAM Centos server running

  - by Josh

  This is my first time configuring a VPS server and I'm having a few issues. We're running Wordpress on a 1GB Centos server configured per the internet (online research). No custom queries or anything crazy but closing in on 8K posts. At arbitrary intervals, the server just goes down. From the client side, it just says "Loading..." and will spin more or less indefinitely. On the server side, the shell will lock completely. We have to do a hard reboot from the control panel and then everything is fine. Watching "top" I see it hovering between 35 - 55% memory usage generally and occasional spikes up to around 80%. When I saw it go down, there were about 30 - 40 Apache processes showing which pushed memory over the edge. "error_log" tells me that maxclients was reached right before each reboot instance. I've tried tinkering with that but to no avail. I think we'll probably need to bump the server up to the next RAM level but with ~120K pageviews per month, it seems like that's a bit overkill since it was running fairly well on a shared server before. Any ideas? httpd.conf and my.cnf values to add? I'll update this with the current ones if that helps. Thanks in advance! This has been a fun and important learning experience but, overall, quite frustrating! Edit: quick top snapshot: top - 15:18:15 up 2 days, 13:04, 1 user, load average: 0.56, 0.44, 0.38 Tasks: 85 total, 2 running, 83 sleeping, 0 stopped, 0 zombie Cpu(s): 6.7%us, 3.5%sy, 0.0%ni, 89.6%id, 0.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2051088k total, 736708k used, 1314380k free, 199576k buffers Swap: 4194300k total, 0k used, 4194300k free, 287688k cached

  Read the article

• MySql server answer #2002

  - by LOIC

  Since this morning, phpmyadmin is giving me the error message #2002 the server doesn't answer (or the connection to local Mysql is not well configured) and a message about control-use. I'm disappointed it used to work until 2am last night and now the MySQL engine doesn't want to start (told me sometimes about sockets ..) LAMPP is installed on a ubuntu 12.04 lm@Famou:~$ sudo service mysqld status mysqld: unrecognized service    & lm@Famou:~$ sudo service mysqld start mysqld: unrecognized service  : It never works with 'service' !!! and root@Famou:/opt/lampp# /opt/lampp/lampp restart Stopping XAMPP for Linux 1.7.7... XAMPP: Stopping Apache with SSL... XAMPP: XAMPP-MySQL is not running. XAMPP: Stopping ProFTPD... XAMPP stopped. Starting XAMPP for Linux 1.7.7... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Couldn't start MySQL! XAMPP: Starting ProFTPD... XAMPP for Linux started. is the result of restart lampp

  Read the article

• Creating security permissions for a non-domain-member user in Windows Server 2008

  - by Overhed

  Hello everyone, I apologize in advance for incorrect use of terminology, as I'm not an IT person by trade. I'm doing some remote work via a VPN for a client and I need to add some DCOM Service security permissions for my remote user. Even though I'm on the VPN, the request for access to the DCOM service is using my PCs native user (and since I'm running Vista Home Premium it looks something like: PC-NAME\Username). The request for access comes back with access denied and I can not add this user to the security permissions as it "is not from a domain listed in the Select Location dialog box, and is therefore not valid". I'm pretty stuck and have no clue what kind of steps I need to do here. Any help would be appreciated, thanks in advance. EDIT: I have no control over what credentials are being passed in to the server by my computer. This scenario is occurring in an installation wizard that has a section which requests you point it to the machine running the "server" version of the software I'm installing (it then tries to invoke the relevant COM service, but my user does not have "Remove Activation Permissions" on that service, so I get request denied).

  Read the article

• Looking to get a small server – need web, PHP, PostgreSQL.

  - by Javawag

  Hi all! I'm looking to get a cheap (low end) server to serve web pages (xHTML/PHP), but I also need to be able to set up PostGreSQL on the system too. Ideally the server would have low power consumption, run Linux (I prefer Mac OS X but a Mac Mini, although the size I'm looking for, is too much money!) and be around £100 (~$160US). EDIT: Just to make it clearer, I'm looking to purchase the server hardware myself – but I want something about Mac Mini sized. I don't want to pay for hosting! Also, quick question – if it's to serve web pages from my home (standard ISP connection, no static IP!), what do I need in place to get this working. I'm guessing I would sign up with some service like no-ip, and register a domain to point to my no-ip address (then install the no-ip software on the server to update that with the current IP). I know the idea of running a server behind a normal ISP connection isn't very elegant, but I'd prefer to have the server where I can see it then pay over the odds for a hosting service where I have little to no control over what happens. Also, I could write my own server software for apps/etc to connect to as well. Anyways I'm rambling! What do you guys think?! Javawag

  Read the article

• Deploy our own software using Puppet?

  - by Ken

  (Apologies in advance for the stupidity in this question. I'm normally a programmer, not a sysadmin, but I've taken it upon myself to automate some things, and clean up some other things which are automated but not in the prettiest way. :-) I've been looking around at various tools for automation of software deployment to a bunch of servers, like cfengine, Puppet, and Chef. So far, Puppet looks the most appealing, but I've certainly not committed to anything yet. These tools all look like they can do a great job of keeping a bunch of servers up-to-date with prepackaged software. What I don't get is: how does one use a tool (like Puppet) to manage deployments of our own internal software? I think I'm at a loss because I've seen a thousand tutorials showing how to keep Apache ensure => latest (which is pretty cool), but nothing that quite corresponds to my use-case today, which is something more like: when a human being pushes The Button, pull branch A from the version-control repository B run command C to compile it copy the binaries D to servers E1 through E10 on each server, run command F to make all changes take effect Puppet sounds great, and I totally see the advantage of declarative, idempotent configuration over some shell scripts, but I've not seen any tutorials for "you want to update your shell scripts to Puppet (or Chef, or cfengine) so here's what you should do". Is there such a thing? Is it obvious to other people how to take the things provided in the Puppet docs and replicate the behavior I want? Am I just not getting it? What it's sounding like to me, so far, is that the human being (#1) would manually package the software (#2 and #3) external to Puppet, manually update the Puppet config, which would trigger Puppet to update the servers ... maybe? (I'm a little confused here, as I'm sure you can tell.) Thanks!

  Read the article

• Ubuntu server crashes; need help figuring how to figure out why

  - by neezer

  I have a 768 Slice at slicehost.com running Ubuntu Server 8.04.2 LTS (hardy) with a LAMP stack on it that periodically crashes, though why I am not sure. From what I can tell, there is a process that basically goes rogue and consumes all the memory on the slice, suffocating all the other programs running until the whole thing comes to a grinding halt, and I have to do a hard reboot of the slice to get it back up and running again. I can't detect any pattern for this (it seems to happen about once a month, more or less). Here's a screenshot of my console during the last crash: I would assume that a possible cause might a PHP script or an apache configuration rule that might cause the crash if triggered? How would I be able to find out which one is the offending one? I've checked and rechecked all my PHP scripts, and running them doesn't seem to trigger the crash. I've also been able to log on to my system during a crash and see what's running (with top), but I can't tell how the offending process was started, so I can't trace the root of the problem! I know my description is overly generic, but unfortunately my expertise in tracking down the source of these glitches is very limited. If you need any additional information about my system in order to help me figure this out, please let me know in the comments, and I will append it to the question. My only other lead as to the culprit here is Wordpress, which we have installed on this server. Here are the details: Wordpress 3.0.3 with the following plugins installed and activated: Addmarx - Bookmark/Share/Email Dropdown, Akismet, All in One SEO Pack, Animated Banners, Automatically publish highlights of any website, directly to your Blog, Broken Link Checker, CMS Dashboard, Collapsing Categories, Status Updater, SubHeading, Ultimate Google Analytics, VastSubCat, WP-CMS Post Control, and WP Super Cache

  Read the article

• Setup: Eclipse in Ubuntu with Apache2 and Subversion

  - by Ricalsin

  Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

  Read the article

• Should an HA failover occur in this scenario?

  - by joeqwerty

  I'm running vSphere 5 in an HA cluster across two hosts (vsphereA and vsphereB). I have the HA cluster configured for host monitoring and datastore heartbeat monitoring with admission control disabled (hopefully I rightfully understand that datastore heartbeat monitoring prevents inadvertent and unwanted HA failovers due to management network isolation). Each host has a single connection to a dedicated iSCSI network and iSCSI target (no MPIO). All vmdk's for all VM's exist on the iSCSI datastore. As a test of HA I disconnected the iSCSI connection on vsphereB and was surprised to see that the running VM's on vsphereB continued to run on vsphereB. The powered off VM's were showing as inaccessible (which I expected due to the fact that they weren't running and the connection from vsphereB to the iSCSI target was severed) but the running VM's continued to run and continued to be "owned" by vsphereB. I expected to see an HA failover occur for those VM's and expected to see them "owned" by vsphereA after the HA failover (which didn't occur). I'm at a loss to understand why an HA failover didn't occur for those VM's. Am I misunderstanding in which cases an HA failover should occur?

  Read the article

• Copying windows home server backup offsite

  - by Simon

  What ways are there to copy a windows home server backup to an offsite location? I'm talking specifically (and only) about the automated backup of my entire machine, and not the shared network folders. I am 90% working away from home on my laptop which has a 640GB drive so the shared folders are essentially useless to me. I backup every night, but if my house burns down or broken into the I'm in serious serious trouble ! I'm really looking for some alternative way to back up my entire machine - which much not interfere with the reliability or speed by which my WHS backs up my laptop every night. Either a way to 'export' a complete machine backup from the server, or recommendations on non-conflicting software I can backup to a 1TB drive at work are what I'm looking for. Note: I believe that WHS uses its own completely proprietary backup and doesn't use things like any 'backup bit' or 'archive bit'. I just dont want to install some other backup software that will conflict. PS I'm now running Windows 7 and just realized that I should probably check out the backup functionality it gives me. I assume that won't conflict right! Edit: Thanks for the hosted solutions. I'd also appreciate ways to backup to an 'offsite' location that I control - like my office vs. my home. The hosted solutions I think will be too slow or expensive for my needs.

  Read the article

• IPv6 routing to another interface

  - by Robert

  I'm trying to get an IPv6 enabled router to forward data from one interface to the other and I'm having issues. When following this example (http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080ba6106.shtml) I am able to get full connectivity between all 3 routers in my simulator. However when I try to use only 1 router; I can't get connectivity to the other interfacs on the same router. My PC is directly attached to FA 0/1 and it can ping the router's interface. However it can not ping any other interface on the router(which unless I'm missing something it should be able to do). The router on the other hand can ping everything. I thought static routes might help; but the router already has routes for everything. I'm thinking the packet should come in; router looks up the destination in it's ipv6 routing table and then realizes it's for itself, and should respond. I thought maybe it couldn't respond directly; so I tried pinging a device like 2001:0000:0000:1000::2, but i don't get a response. I'm running on IOS 12.4. I'm missing something(hopefully simple), but I just can't see what it is. With only 1 router; how do I enable my PC to talk to the other subnets? Thank you in advance, Robert Topology: R1 FA 0/0: 2001:0000:0000:0000::1/52 FA 0/1: 2001:0000:0000:1000::1/52 FA 1/0: 2001:0000:0000:2000::1/52 Loopback 0: 2001:0000:0000:3000::1/52 PC: 2001:0000:0000:2000::2/52 PC plugs directly into FA 1/0 on the router. --- Configuration --- ipv6 cef ipv6 unicast routing interface Loopback0 no ip address ipv6 address 2001:0000:0000:3000::1/52 ipv6 enable ! interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000::1/52 ipv6 enable ! interface FastEthernet0/1 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:1000::1/52 ipv6 enable ! interface FastEthernet1/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:2000::1/52 ipv6 enable --- end of config --- --- routing table --- IPV6Lab#show ipv6 route IPv6 Routing Table - 10 entries Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP U - Per-user Static route I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 C 2001:0000:0000::/52 [0/0] via ::, FastEthernet0/0 L 2001:0000:0000::1/128 [0/0] via ::, FastEthernet0/0 C 2001:0000:0000:1000::/52 [0/0] via ::, FastEthernet0/1 L 2001:0000:0000:1000::1/128 [0/0] via ::, FastEthernet0/1 C 2001:0000:0000:2000::/52 [0/0] via ::, FastEthernet1/0 L 2001:0000:0000:2000::1/128 [0/0] via ::, FastEthernet1/0 C 2001:0000:0000:3000::/52 [0/0] via ::, Loopback0 L 2001:0000:0000:3000::1/128 [0/0] via ::, Loopback0 L FE80::/10 [0/0] via ::, Null0 L FF00::/8 [0/0] via ::, Null0 --- end of routing table ---

  Read the article

• What are the IR codes the new Apple Remote (alu) uses?

  - by index

  I would like to clone the new Apple Remote (infrared, second generation, aluminium) just for fun with a microcontroller. Most codes of the previous model can be found in the LIRC remote control database (all except the key combinations menu + <<,play, which unpair, change ID, pair the remote. I also don't know which bit encodes the battery status. It uses a modified 32 bit NEC protocol (reverse LIRC codes bytewise). But the new Apple remote uses two additional codes for the play and the new select button. I don't have a mac, so I can't brute force test codes either ;-) So if someone possesses such a remote and the ability of recording those two new buttons and three combinations I'd really appreciate it. If you can't run LIRC (or it gets confused by the new codes) and you don't have an oscilloscope or logic analyser, maybe you could hook up a photo diode to your sound input and record the codes with Audacity? Just hit record, hit each button and combo a few times, hit stop, upload the uncompressed WAV file to a sharing site, done. That'd be great!

  Read the article

• Windows 8.1 in a VMWare Workstation 10 guest's mouse is missing, but only sometimes

  - by Rob Perkins

  I have VMWare Workstation 10 running on a Windows 7 machine, hosting a k guest OS. Before upgrading to WS 10 I was using version 9, and the Win8 guest OS ran without difficulty or error conditions. Since upgrading and installing the most current VMWare Tools inside the guest after upgrading to version 10, there are circumstances where the mouse pointer is not visible; the mouse position appears stuck at a screen location which is not the center of the virtualized display; and mouse click and scrolling events still get processed. Once this begins happening I have to reboot the host machine to get it to stop. (VMWare Tools 9.6.1 build-1378637 is what the WS 10 software installed) The problem seems to correlate with whether the mouse is captured during Win 8.1's bootup process, before control is passed to the login screen. If I explicitly click the mouse into the guest OS and move it slowly around while the system is booting, then I see the mouse after clicking to lift the first screen and expose the password prompt, and there is never a problem within the guest. If I don't do this during bootup, there is no mouse pointer, with the symptoms listed above. I have tried removing and reinstalling VMWare tools, and the other steps published for "mouse problems" from VMWare's chaotic troubleshooting database. The problem persists. Is there a setting in the virtual machine's configuration which could prevent this behavior?

  Read the article

• Could hybrid SSD + HDD be made with fixed internal partitions?

  - by Aaron

  I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

  Read the article

• How to play 24 fps video smoothly on a 60Hz display? (or which player supports frame interpolation?)

  - by netvope

  I use mpc-hc to play videos on Win7 x64. With the default settings (#1), video playback is great most of the time. But for panning shots, playback is not smooth. I stepped through the video frame by frame and found that the panning movement is smooth (e.g. each frame shifts horizontally by 10 pixels), so the problem is how the 23.976 fps video is interpolated to 60Hz. The judder looks like what would be caused by a "2:3 pulldown", where the frames are played unevenly like: frame 1, 1, 2, 2, 2, 3, 3, 4, 4, 4, etc (#2) Using "optimal renderer settings" (#3) instead of the default disables the Aero theme and causes tearing. Setting my LCD display to 50Hz may have improved the judder slightly (but I can't really tell). My display does not support 24Hz or 48Hz, and forcing them in the Nvidia control panel gives blurry screen. I've tried other video players (VLC and KMPlayer), the ReClock Directshow Filter, video files from different sources (#4), turning on/off DXVA, and a computer with a different GPU, but the judder in the playback is similar. None of them solved the problem. So, how can I play 23.976 or 24 fps video smoothly on a 60Hz display? I think a video player could make the video smoother by doing linear interpolation, such as: 1. 100% frame 1 2. 60% frame 1 + 40% frame 2 3. 20% frame 1 + 80% frame 2 4. 80% frame 2 + 20% frame 3 5. 40% frame 2 + 60% frame 3 6. 100% frame 3 7. 60% frame 3 + 40% frame 4 .. etc Can any existing video player do this? Footnotes: (#1) Video renderer: EVR Custom Pres. (#2) This example converts a 24 fps video into 30 fps (#3) View Renderer settings Reset Reset to optimal renderer settings (#4) The files I have are all H.264 mkv files, but I don't think the file format/encoding matters.

  Read the article

• Unable to connect to second name of Windows 2008 Server R2 machine from XP

  - by Tumba

  I used the command netdom computername /add:newname.domainname.com to add a second name to a server running Windows 2008 Server R2. After restarting the server, I had DNS "A" entries for both names. In addition, the second name was added to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames, which I believe should have taken care of any NetBIOS resolution. From my Windows 7 workstation, I can ping both names and running net view on both names reveals the same list of resources. From Windows XP, I can ping both names, but net view only works on the first name. Running net view on the second name returns: System error 52 has occurred. You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again. What do I need to do to make the second name usable from XP clients? Update: I was able to resolve the problem by adding the REG_DWORD key DisableStrictNameChecking = 1 to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters, then restarting the Server service. However, I do not understand why this was necessary.

  Read the article

• Is git-annex appropriate for my scenario?

  - by Karel Bílek

  I have a git repository with source codes I want to put in the open on github. However, I also have gigabytes of data that I don't want to have in the open and in the repo - they are big, they are proprietary, they are "burdened" with copyrights and so on. However, those are also logically "part of the same project" and I wish to have some control over their history (basically, what git already does). Right now, I have them in the directory "data" in the repository and I have the directory ignored and I resign on getting them to git. However, I have read about git-annex and it seems it can do what I want. So, I have two questions. Is git annex appropriate for me? How exactly should I use git annex for my scenario? Meaning - which commands should I use and how? I have tried to read the official documentation but it talks about use cases that I don't care about. I have the data on one computer only and I don't think I will be moving them soon (it's nice to have the possibility, but it's not why I want to use git annex). Also, the documentation is pretty hard to read.

  Read the article

• How to debug modsecurity_audit_log

  - by max87

  I was accessing www.example.com/RestAPI/index.php/tweets.json in my server. The modsec_audit.log showed the following error, but there is no related errors/warnings in modsec_debug.log. I could see the Internal Server error is logged in example-error_log. How can I debug this Internal Server error? --8560e90b-A-- [21/Mar/2012:07:01:52 +0000] T2l84H8AAAEAAGxPZ@QAAAAG x.x.x.x 33101 x.x.x.x 80 --8560e90b-B-- GET /RestAPI/index.php/tweets.json HTTP/1.1 Host: www.example.com User-Agent: Mozilla/5.0 (X11; Linux i686; rv:11.0) Gecko/20100101 Firefox/11.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Cookie: __utma=159129855.1463065063.1331789485.1331789485.1331789485.1; __utmz=159129855.1331789485.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); 8cb6a414cf5ec1919864de0e80bea4da=0es7dcu0p10cocfpferb2lddi0; 8926e4f3c475bb6fcacb409299f1bd27=53cf8c5e6bf78ea45096945377e6d609 Connection: keep-alive Cache-Control: max-age=0 --8560e90b-F-- HTTP/1.0 500 Internal Server Error X-Powered-By: PHP/5.3.5 Content-Length: 0 Connection: close Content-Type: text/html; charset=UTF-8 --8560e90b-H-- Apache-Handler: php5-script Stopwatch: 1332313312358005 130428 (- - -) Producer: ModSecurity for Apache/2.5.12 (http://www.modsecurity.org/); core ruleset/2.0.5. Server: Apache --8560e90b-Z--

  Read the article

• Internet in the router but not in the local network.

  - by TheMouse

  I have a PC and a laptop (Windows 7 - both) which should connect through router to Internet. The router is Linksys wrt120. My ISP is using PPPoE. I have connected the Internet cable to the router, clone the MAC of my PC, writing the username and the password for my Internet connection. After seconds the router has acquired IP from my ISP. I have used the administration panel of Linksys and with the help of the ping and tracert commands which are built into it - I can connect to the world, outside the network. The problem is when I try to connect the PC or the laptop to the network. There's no problem here. The DHCP server of the router gives them appropriate addresses. The problem is that they couldn't connect to either Internet addresses (google.com) or IP addresses. But they can connect to the router and its control panel. I tried several times, reset the router..but there's no Internet..still.

  Read the article

• Transferring domain from one registrar to another

  - by Macha

  I have a domain from my old web host, which was free with my hosting account. After a few years, I am moving to a VPS. Most of my other domains were registered with Namecheap, so it was just a matter of changing a few DNS records. However, given that my old host does not provide me with a DNS control panel, and I don't want to be paying a full hosting bill for just domains, I'm now looking into transferring it. My old host says there will be a charge of $15 to them. NameCheap's page seems to imply you don't need the current registrar to do anything, but it also seems to be based on sending an email to the one listed in whois. Of course, my old host have whoisguard on the domain so the only email on it is [email protected] (and not a unique [email protected], just [email protected]) which doesn't go to me. Again, there doesn't seem to be an option to disable this. So, is it a case of paying my old host's fee, and paying again for the domain from NameCheap, or is there some other way to transfer my domain? (I'm not really sure which of the trilogy sites this is best for.)

  Read the article

• LDAP Account Locked Out Sporadically after Password change - Finding the source of invalid attempts

  - by CityView

  On a small network of machines (<1000) we have a user whose account is being locked out after an indeterminate interval following a password change. We are having severe difficulties finding the source of the invalid logon attempts and I would appreciate it greatly if some of you could go through your thought process and the checks you would perform in order to fix the problem. All I know for sure is that the account is locked out several (5+) times a day, I can't even be sure it's due to failed login attempts as there is no record of failure until the account is locked. So far I have tried; Logging the account out of everything we can think of and back in with the new password Scanning the user's box for any non standard software which might perform an LDAP lookup Checking all installed services on our production boxes to check none are attempting to run under the account Changing the user back to their old password (Problem persists so perhaps password change is a red herring) Wireshark on a box where lots of LDAP authentication is performed - Rejects only occur after account is already locked out Clearing the credential cache in - Control Panel - User Accounts - Advanced Looking at the local I'm at a loss for what to try. I am happy to try any suggestions you have in order to diagnose the issue. I think my question boils down to a simple request; I need a technique for deriving the source (Application/Host) of the invalid login attempts which are causing the account to be locked. I'm not sure if that's even possible but I suspect there must be more I can try. Many thanks, CityView

  Read the article

< Previous Page | 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025  | Next Page >