Search Results

Search found 6432 results on 258 pages for 'wireless adapter'.

Page 102/258 | < Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >

  • Verizon 4G LTE vs. a LAN

    - by n8wrl
    I have been having quite a bit of trouble getting my new Verizon 4G-LTE service running on a Windows 7 desktop. My desktop is on a LAN here at home with two other PC's. We all share printers, files, media, etc. Until yesterday, we also shared a Verizon 3G modem via a NetGear 3G broadband WAP. That isn't compatible with the 4G so now I am just trying to get the 4G modem working directly connected to one of the desktops. After some USB wrangling, it seems to work. Except, every 7-10 minutes the connection would drop. After some time on the phone with a very nice Verizon technician, it seems to be staying up - it's been up for 20 minutes now. He told me that my LAN was causing the 4G to drop. That traffic on my LAN, even though it is not destined for the internet (ICS not working yet) was causing the cell tower to detect an 'IP change' and a 'security violation' in my modem and drop my connection. Is this Verizon's way of forbidding more than one computer to share a modem? I have my computer running now without a LAN connection and the 4G is still up. But this isn't practical. Has anyone heard of this?

    Read the article

  • What is a good custom MAC address? [closed]

    - by rausch
    My new notebook has been dropping the WiFi connection infrequently. The reason was, that my PS3 had the same MAC address. I changed the MAC address of my notebook and the WiFi is now stable. At first I just reduced the address' last block by 1, which happened to be the MAC address of another device. I reduced it again and for now it's fine. In order to avoid conflicts in the future, is there an address range that is safe to use for custom/non-vendor MAC addresses?

    Read the article

  • Cannot Resolve Host Or Access Website Through Router

    - by Boris_yo
    This is weird. I am on Windows XP with Edimax BR 6204Wg. I have 3 devices - 2 laptops and 1 smartphone. 1st laptop and smartphone are connected through WiFi to router and 2nd laptop is connected through LAN to router. Before firmware upgrade i did not try to access website but after firmware upgrade to latest version: http://www.edimax.eu/en/support_detail.php?pd_id=11&pl1_id=3#02 i had problems resolving host, pinging, tracerting and accessing website. Sometimes ping and tracert work but i cannot access website and sometimes i can access website but ping and tracert do not work. Weird? I downgraded to previous version and no changes. If i can no longer access that website through Internet Explorer, i can access it in Firefox. I tried deleting cookies, clearing cache and that seem not make difference. Switching LAN port did not make difference. When i disconnect router and connect laptop through LAN to internet modem, everything is normal. I tried resetting router, resetting to factory default settings and all did not help. At the moment i can access website on laptop connected through LAN from Firefox and Internet Explorer, but on my smartphone i can access website only with Opera but not with built-in browser and Skyfire. UPDATE: I just could only access with Internet Explorer but not with other browsers on my PC. Minutes later i could access with all browsers. But on smartphone i could only access with Opera and not with other browsers. I am confused. I also determined that sometimes i can access and sometimes can't. What is also weird is that when ping and tracert cannot resolve host, i still am able to access website.

    Read the article

  • How to setup a Wi-Fi 2-computer network with Internet sharing?

    - by Narek
    I have the following devices: Desktop Computer (Windows XP Professional) Laptop Computer (Windows Vista Home Premium) A USB modem that I want to connect to my Desktop computer (so my Desktop has Internet) And a Wi-Fi router (D-Link, model: DIR-300) that I want to use in order to create a connection between mentioned two computers to be able to share files and what is the most important thing to make my laptop to have access to the Internet. What steps I should do to have this system?

    Read the article

  • Load-balance with LAN and Wifi

    - by Synox
    I have a Mac, which runs Mac OSX 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wifi, one can be accessed via LAN. In OSX i can define the priority, which network to choose first. But what i wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused wifi routers if this would help. Compiling and configuring programms in linux is no problem for me. Thanks for any help.

    Read the article

  • Networking not working in Windows 7 - "The account specified for this service is different from the account specified for other services"

    - by tog22
    I have a homebuilt computer with a GA-Z68MA-D2H-B3 motherboard with a Realtek RTL8111E LAN chip. Ethernet was working fine in Windows 7 until I reinstalled this OS, but now it's stopped, while still working in other OSes. I've tried reinstalling drivers from both the Gigabyte and Realtek sites to no avail; I've also plugged in and installed an Asus USB-N13 wifi dongle and this doesn't work oddly. How can I diagnose and fix this issue? In 'Network and Sharing Center' says "The account specified for this service is different from the account specified for other services running in the same process" under the heading 'Unknown'. Following the advice at http://www.sevenforums.com/network-sharing/130159-dependency-service-group-failed-start.html#post1122627 I've gone to 'Control Panel= Admin Tools= Services' and ensured the services listed at that URL are started (one - IIRC 'Come+ Event System' refused to start as user 'Local services' so I've had to set it to log on with the 'Local system account'... I suspect this may be part of the problem).

    Read the article

  • Why can I view my site over a 3G connection but not through my wifi?

    - by Jonathan
    So, I am sitting in my office with four computers on the same network and internet connection. Two of the computers can visit this particular website. Two of the computer get a message "Google Chrome could not find". I have tried FF and IE also with the same problem. I can view the site 90% of the time on two of the working computers although the site seems slow and sometimes I also get the same errors as the other two computers. I have flushed the DNS, reset the router, tested the site on other peoples computers with success. Is this likely to be a site issue, an ISP issue, a hosting issue? Any advice is greatly appreciated. Here is the ping from the working machine: C:\Users\Jon>ping www.balihaicruises.com Pinging www.balihaicruises.com [208.113.173.102] with 32 bytes of data: Reply from 208.113.173.102: bytes=32 time=331ms TTL=47 Reply from 208.113.173.102: bytes=32 time=327ms TTL=47 Reply from 208.113.173.102: bytes=32 time=326ms TTL=47 Reply from 208.113.173.102: bytes=32 time=329ms TTL=47 Ping statistics for 208.113.173.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 326ms, Maximum = 331ms, Average = 328ms Traceroute: Tracing route to www.balihaicruises.com [208.113.173.102] over a maximum of 30 hops: 1 1 ms 17 ms 3 ms 192.168.1.1 2 42 ms 37 ms 36 ms 180.254.224.1 3 39 ms 47 ms 40 ms 180.252.1.69 4 36 ms 616 ms 57 ms 61.94.115.221 5 84 ms 76 ms 80 ms 180.240.191.98 6 73 ms 80 ms 72 ms 180.240.191.97 7 157 ms 143 ms 116 ms 180.240.190.82 8 115 ms 113 ms 120 ms ae1-123.hkg11.ip4.tinet.net [183.182.80.93] 9 331 ms 332 ms 335 ms xe-3-2-1.was14.ip4.tinet.net [89.149.184.30] 10 327 ms 330 ms 331 ms internap-gw.ip4.tinet.net [77.67.69.254] 11 437 ms 415 ms 350 ms border10.pc2-bbnet2.wdc002.pnap.net [216.52.127.73] 12 322 ms 823 ms 398 ms dreamhost-2.border10.wdc002.pnap.net [216.52.125.74] 13 328 ms 336 ms 326 ms ip-208-113-156-4.dreamhost.com [208.113.156.4] 14 326 ms 328 ms 336 ms ip-208-113-156-14.dreamhost.com [208.113.156.14] 15 327 ms 331 ms 333 ms apache2-udder.crisp.dreamhost.com [208.113.173.102] And then for the machine that doesn't work: C:\Users\Microsoft>ping www.balihaicruises.com Ping request could not find host www.balihaicruises.com. Please check the name and try again. C:\Users\Microsoft>tracert www.balihaicruises.com Unable to resolve target system name www.balihaicruises.com.

    Read the article

  • Windows 7 freezes on connecting second time to same wifi network

    - by Rakesh Juyal
    I am using Lenovo - y470, which comes with windows 7 home premium. I can connect to my wifi network and there is no issue in that. But the problem comes if the network get disconnected and i again try to connect to same wifi network. As soon as i click on connect my system freezes, and i can not even press ctrl+ alt+ del . The only think i am allowed to do at that time is press and hold power button to shut down the system and restart it again. Please tell me how to resolve this issue. Please let me know if some more information is required. OS: Windows 7 Router: Netgear n-150

    Read the article

  • 802.11 Capture Frame

    - by ALi
    I am using wireshark in monitor mode to capture all the frame. I buffered all the QosData in order to calculate the biterate of each station on the network. I calculate the biterate but it is not an accurate value. what i need to know is when the station use the network alone and when it uses it with another station? i know if two station with different wifi card for exemple ( st1 802.11g 54 Mb/s, st2 802.11n 300 Mb/s) if st1 uses alone the line the biterate used is 28 MB/s and if st2 uses alone the network the bit rate increase to approximately 150Mb/s but if the two station use the network at the same time the st1 lost about 80% of its bit rate because of the st1 wifi card thx in advance

    Read the article

  • Disable WLan if Wired/Cable Network is available

    - by ifischer
    The question says it all. All i want is that my W-Lan connection should be disabled whenever a wired connection is available. What would be the easiest way to do that in Ubuntu/Gnome? In all guides (for instance some about guessnet) i found i had to configure my whole network configuration (WPA keys, DHCP, ...), but i find that a bit too complicated for such a simple use case. I just want to disable wlan0 when eth0 is connected.

    Read the article

  • router only assigns small number of IPs

    - by Liam Coates
    Been having a problem with my router for a while now, might just be because it is really old but here's the problem: If a lot of computers are connected to my home network someone will get disconnected. They are assigned IPs and it seems like at a certain point (and I don't know how many) you either get assigned the same IP as someone else or something else is happening and you get disconnected - until i soft reset it and it works again which takes 30 secs. I'd say my tablet, my PC, my sisters iPad, 2 laptops and a netbook is the most that can be connected at one time so that is 6 but that should be fine. The only way I know this is the problem is because I turned on my tablet and I was online on my PC, got disconnected but my tablet was still connected, this is just after i turned the tablet on so I know my router is having difficulty with IPs, it is like it assigned the same IP to the tablet which then clashed with my desktop and knocked me off. I see that sometimes the following solves it as well so I wrote a batch file with a menu to execute these commands as I have to do it so often. ipconfig /release ipconfig /flushdns ipconfig /renew Any ideas? Or shall I just get a new router as this one is old and maybe can't handle giving out that many IPs? Cheers!

    Read the article

  • Pushing WiFi configuration through Active Directory

    - by Hank Gettinger
    I'm trying to push wifi settings to client computers through Active Directory, something that will add a defaul SSID to connect to and a WPA password. The only thing I've heard of is a script by Aruba labs called wificfg_xp.exe on a couple of forums (Here and here), but the link to the download page is always broken. Does any one know of an alternative way to download this file, or another way to push these settings with AD?

    Read the article

  • Load-balance with LAN and Wi-Fi

    - by Synox
    I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programms in Linux is no problem for me.

    Read the article

  • Virtual Wifi on Vista

    - by XGreen
    Hi Guys, Sorry if this is a very dumb question. I have installed the virtualWIFI msi on vista. I assumed that would simply just allow selecting more than one wifi connection with my single card however I don't get much new options. Any help on how to get this running on vista is greatly appreciated.

    Read the article

  • Find the IP of the router between me and main router/gateway?

    - by Crash893
    I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

    Read the article

  • Internet connectivity issues with one router but work ok with other router

    - by user825904
    I have one Tplink ADSL ROUTER and when i enter username and password on setup page then everything works fine. Now i have one more router Netgear router then when i enter same username and password then interworks ok for some 50% websites but for other 50% websites the page is not loaded and it hangs there. In the sats bar it says website found , waiting for reply and it hnags there and no site is displayed. I wonder which setting is different on these two routers. The Tplink router i have bought is from local shop but netgear router is from different country. Can that make some difference

    Read the article

  • Can't access certain specific IP/domain on Windows 7

    - by jfrobishow
    Been banging my head on the wall for some time now. I have a fresh install of Windows 7 - Ultimate ~x86. Some IPs can't resolve properly, it doesn't matter if I try using Firefox, Chrome or IE I end up with a domain not found (server not found, etc.) I am behind a router, all the other computers aren't affected only this Win 7 machine. It's only certain sites. e.g. xkcd.com, facebook's cdn, google group. Things I have tried: flushdns ipconfig renew Disable IP v6 on the NIC Double checked that the computer was in the right timezone @ the right time. Reinstall the NIC driver. Again 90% of the sites will work but not the major one :P help!!!

    Read the article

  • Laptop kicks other users off the wifi when it connects, then gets disconnected itself

    - by Devon
    I've got an Acer Aspire One running Linux. When I connect to my building's wifi, everything seems fine for a short period of time (I can google a few things or start downloading an Apt package), but then other devices on the network lose their IP addresses. Shortly after that, my computer also gets disconected. My computer is set to use DHCP. What causes this, and do you know how it could be fixed? Am I causing a broadcast storm?

    Read the article

  • Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

    - by d4ryl3
    I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

    Read the article

  • Setting up VM server access via host MacBook Pro's WiFi hotspot

    - by user7609
    I have a virtual machine (VM) hosted on a MacBook Pro (MBP). There is a server installed on the VM. I'm trying to make this server accessible via MBP's WiFi hotspot so I can see it from my iPhone when connected to the hotspot. The VM is Parallels (latest version) and its OS is Win7 and the MBP is 2013 with Mavericks. With default settings and no hotspot enabled I can access the VM's server from the host OSX. The network setting on the VM is "Shared" and it's IP is 10.211.x.x. When I join the hotspot from another laptop the other laptop gets an IP 169.254.x.x and it can't ping 10.211.x.x or access the server on that VM Is there a combination of settings on the VM and MBP's hotspot such that I can access the VM server from a client on the MPB's hotspot?

    Read the article

  • How to take advantage of two Internet connections (WiFi / Wired) ?

    - by Madhur Ahuja
    I have two separate internet connections, one through WiFi and other Wired. However, generally I have observed that Windows try to use only one ( mostly faster one/ Or Wired by preference - I am not sure). Is there a way I can take advantage of having both ? For example I can have my web browser use the wired one and my torrent software use the Wifi One. PS: This question may be regarded as duplicate but reason I am posting it again is I have not found any concrete answer for it. Two internet Connections, one LAN - how to share?

    Read the article

  • Add 802.11n to existing 802.11g environment

    - by Andrew Robinson
    I have a small home network that is currently running 802.11g. Two computers that are capable of 802.11n and two devices (a BlackBerry and a Skype phone) that are limited to 802.11g. I have a few neighbors running 802.11g but their signals are very weak. How big an impact will the two G devices have on N speeds? Will they pull the whole network back down to G? These two devices are hardly ever used where as the other N devices are heavily used. If I add an N router to the network (instead of replacing the G) and set my existing G router to use channel 1 with 20MHz bandwidth and then set the N router to use 6 & 11 for 40MHz will I eliminate the overlap and allow for full speed on both networks?

    Read the article

< Previous Page | 98 99 100 101 102 103 104 105 106 107 108 109  | Next Page >