Search Results

Search found 40915 results on 1637 pages for 'virtual method'.

Page 1021/1637 | < Previous Page | 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028  | Next Page >

• Strange requests coming from Korean Site

  - by Jim Jeffers

  Lately I've been finding a lot of strange requests like this coming to my rails app: Processing ApplicationController#index (for 189.30.242.61 at 2009-12-14 07:38:24) [GET] Parameters: {"_SERVER"=>{"DOCUMENT_ROOT"=>"http://www.usher.co.kr/bbs/id1.txt???"}} ActionController::RoutingError (No route matches "/browse/brand/nike ///" with {:method=>:get}): It looks like it's automated as I get a lot of them and notice the strange parameters they're trying to send: _SERVER"=>{"DOCUMENT_ROOT"=>"http://www.usher.co.kr/bbs/id1.txt??? Is this something malicious and if so what should I do about it?

  Read the article

• Network / Internet diagnostic tool to locate an error?

  - by Jesper

  Hi, I’m facing some difficulties with the Internet / network at my work and I have trouble locating the precise error and when and how it occurs. The problem is that the client machines in the house sporadic is disconnected to the Internet. I’m some what new so I haven’t that much inside in the network and apparently neither has my predecessor. What I am requesting and hoping you guys knows about is, if there exist some kind of network monitor tool I can install and run and it will periodically check the network, the Internet connection etc. and record to logs. Then, if there suddenly arises a problem some time of the day in some part of the network or the Internet connection, I can check it perhaps the next day. I’ve just downloaded and installed Microsoft Network Monitor 3.3 application and hopeful it can give me some answers on where the instability is located but I still would like a tool to make different checks and test in some time interval. Do anyone know about such a program or another kind of performance / diagnostic tool / method I can use? Sincere Jesper

  Read the article

• Can I easily use a VPN to duplicate SSH Tunneling functionality?

  - by Steve V.

  Right now, when I want to use an unsecured wireless connection with my (Linux) laptop, I secure my connection using a variation of the method provided here. However, to the best of my knowledge, the (non-jailbroken) iPad does not allow applications to tunnel traffic through local ports. However, it does seem to allow certain VPN traffic. I have never set up, or even used, a VPN before. I'm looking for confirmation that I'm not barking up the wrong tree before I invest significant effort into setting up my own VPN server. If I want to secure my wireless iPad traffic over an unsecure wireless connection, would I be on the right track by looking at a VPN?

  Read the article

• Forms authentication failed between web server and sql server

  - by Matt Bear

  I've actually found the solution, but I'm trying to understand why it failed, and why my solution fixed the problem. We have an application that uses forms authentication between a web server and sql server, web server runs server 2008, sql server runs 2008 r2, and sql server 2008. In august the sql server was patched with .net 3.5.1, the web server was untouched, and the forms authentication continued to work. 1 week ago we virtualized the web server onto our vSphere server because of failing hardware. Afterwards the form authentication failed with event code 4005, detail code 50201, The ticket supplied was invalid (on the sql server). In fact the sql server started generating Schannel errors and began blue screening 3-4 times a day. At this point I touched the sql server for the first time(ever), the errors were non specific, any reference to them I could find had to do with either zone alarm(which we don't run), or memory errors. So I applied service pack 1, which stopped the blue screening, but did not fix the forms authentication. At this point we had a work around, so we put it on the back burner while we completed another project, and I was able to get back on it last night. First thing was to adjust some code in the webconfig file on the sql server, nothing, next was regenerate and change out the machine key, still no change. Update the DNS servers, no change. Finally I went through and installed all windows updates, two reboots, (over RDP installed a network card driver which failed, and did not have my server room key, that was fun). After that, forms authentication was working again. And the sql server stopped generating as many errors, I've gotten two schannel errors since then. In short, forms authentication began failing when the web server was cloned onto a virtual machine, which caused the sql server to blue sceen? and forms authentication to fail. And could only be fixed by applying patches to the sql server?(I'm wishing I had patched the servers one at a time so I could know for sure which patch on which server fixed it). My question is why did it fail, and why did patching fix it? I hate fixing something without fully understanding the why and how.

  Read the article

• deploying a Python application from a PHP developer

  - by user1218776

  I'm a little confused on the deployment process for Python. Let's say you create a brand new project with virtualenv source bin/activate pip install a few libraries write a simple hello world app pip freeze the dependencies When I deploy this code into a machine, do I need first make sure the machine is sourced before installing dependencies? I don't mean to sound like a total noob but in the PHP world, I don't have to worry about this because it's already part of the project. All the dependencies are registered with the autoloader in place. The steps would be: rsync the files (or any other method) source bin/activate pip install the dependencies from the pip freeze output file It feels awkward, or just wrong and very error prone. What are the correct steps to make? I've searched around but it seems many tutorials/articles make an assumption that anyone reading the article has past python experience (imo).

  Read the article

• Python Django sites on Apache+mod_wsgi with nginx proxy: highly fluctuating performance

  - by Halfgaar

  I have an Ubuntu 10.04 box running several dozen Python Django sites using mod_wsgi (embedded mode; the faster mode, if properly configured). Performance highly fluctuates. Sometimes fast, sometimes several seconds delay. The smokeping graphs are al over the place. Recently, I also added an nginx proxy for the static content, in the hopes it would cure the highly fluctuating performance. But, even though it reduced the number of requests Apache has to process significantly, it didn't help with the main problem. When clicking around on websites while running htop, it can be seen that sometimes requests are almost instant, whereas sometimes it causes Apache to consume 100% CPU for a few seconds. I really don't understand where this fluctuation comes from. I have configured the mpm_worker for Apache like this: StartServers 1 MinSpareThreads 50 MaxSpareThreads 50 ThreadLimit 64 ThreadsPerChild 50 MaxClients 50 ServerLimit 1 MaxRequestsPerChild 0 MaxMemFree 2048 1 server with 50 threads, max 50 clients. Munin and apache2ctl -t both show a consistent presence of workers; they are not destroyed and created all the time. Yet, it behaves as such. This tells me that once a sub interpreter is created, it should remain in memory, yet it seems sites have to reload all the time. I also have a nginx+gunicorn box, which performs quite well. I would really like to know why Apache is so random. This is a virtual host config: <VirtualHost *:81> ServerAdmin [email protected] ServerName example.com DocumentRoot /srv/http/site/bla Alias /static/ /srv/http/site/static Alias /media/ /srv/http/site/media WSGIScriptAlias / /srv/http/site/passenger_wsgi.py <Directory /> AllowOverride None </Directory> <Directory /srv/http/site> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Ubuntu 10.04 Apache 2.2.14 mod_wsgi 2.8 nginx 0.7.65 Edit: I've put some code in the settings.py file of a site that writes the date to a tmp file whenever it's loaded. I can now see that the site is not randomly reloaded all the time, so Apache must be keeping it in memory. So, that's good, except it doesn't bring me closer to an answer... Edit: I just found an error that might also be related to this: File "/usr/lib/python2.6/subprocess.py", line 633, in __init__ errread, errwrite) File "/usr/lib/python2.6/subprocess.py", line 1049, in _execute_child self.pid = os.fork() OSError: [Errno 12] Cannot allocate memory The server has 600 of 2000 MB free, which should be plenty. Is there a limit that is set on Apache or WSGI somewhere?

  Read the article

• IIS is overriding my response content, if i manually set the Response.StatusCode

  - by Pure.Krome

  Hi Folks, Problem when i manually set the HTTP Status of my Response stream to .. say 404 or 503, IIS renders up the stock IIS content/view, instead of my custom view. When I do this with the Web Development Server (aka. Casinni), it works correctly (ie. my content is displayed and the response.statuscode == my entered data. Is there anyway I can override this behaviour? How To Replicate Make a default ASP.NET MVC1 web app. Add the following route public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", "{*catchall}", new { controller = "Home", action = "Index" } ); } Now replace the the HomeController's Index method with... [HandleError] public class HomeController : Controller { public ActionResult Index() { Response.StatusCode = 404; return View(); } } :( Please help!

  Read the article

• http://localhost:8080 is not working on running apacher Server through XAMPP

  - by Dinesh Kumar

  I am unable to configure a PHP/MySQL/Apache environment on my local machine using XAMPP. In my xampp control panel the Apache and MySQL status is as started, but localhost is not working. I have tried the following method but still i am unable to execute: I tried to reinstall after uninstalling several time. I changed the "Listen 80" to Listen localhost:80, localhost:8080, 127.0.0.1:80,127.0.0.1:8080, MySystemIP:80/8080 and tried to execute the relevant url in my browser. I executed the netstat -noa and tasklist and found Apache is is using Port80. Skype is also not using the port80. I edited the firewall to allow port80. Also disabled the firewall. Is there any other solution to fix my problem. I remember 8 months back everything worked properly. Now when i try to reinstall xampp the issue raised it. I am Using Win-xp os. Thanks in advance

  Read the article

• ReadyNAS issue with Google Apps?

  - by Jauder Ho

  The power went out (again) in my house today so I decided to set up some alerting. Since I have a ReadyNAS and the latest version of Raidinator seems to have SMTP TLS support, I figured I would try setting things up to email to a domain I have hosted on Google Apps. At this point, I have everything working IF I use a Gmail account but as soon as I switch to a Google Apps email address, it stops working and complains with smtpstatus=535 smtpmsg='535-5.7.1 Username and Password not accepted. Learn more at \n535 5.7.1 http://mail.google.com/support/bin/answer.py?answer=14257 30sm16076226wfd.23' errormsg='authentication failed (GNU SASL, method PLAIN)' exitcode=EX_NOPERM I'm wondering if anyone else has encountered this. Google's extremely aggressive captcha does not help but I am able to log in now without a captcha from a browser so I'm open to any ideas why the simple switch of a user/password combo that is supposed to work does not. I'm also attaching my config so that others can see how to set things up.

  Read the article

• awstats parse of postfix mail log drops all records

  - by accidental admin

  I'm trying to get awstats to parse the postfix mail log, but it drops allmost all entries with messages like: Corrupted record (date 20091204042837 lower than 20091211065829-20000): 2009-12-04 04:28:37 root root localhost 127.0.0.1 SMTP - 1 17480 Few more are dropped with an invalid LogFormat: Corrupted record line 24 (record format does not match LogFormat parameter): 2009-11-16 04: 28:22 root root localhost 127.0.0.1 SMTP - 14755 My conf LogFormat="%time2 %email %email_r %host %host_r %method %url %code %bytesd" I believe matches the log format (and besides is the log format I've seen everywhere for awstats mail parsing). Besides, is the same entry format as all the other entries in the mail log. Whatever is left is dropped too: Dropped record (host localhost and 127.0.0.1 not qualified by SkipHosts): 2009-12-07 04:28:36 root root localhost 127.0.0.1 SMTP - 1 17152 I added SkipHosts="" to the .conf file but to no avail. I feel like awstats really has some personal quarrel with me today.

  Read the article

• Pause/play AJAX on particular tabs in firefox

  - by bguiz

  Hi, I want to know if there is some method to disable AJAX on particular tabs within Firefox and re-enable them later. My concern is that I have metered bandwidth, and I need to conserve my usage. But I also like to leave several Gmail tabs open in the background. It would be great if I could just hit a "Pause AJAX" button, to stop the contents of that tab from sending or receiving anything, and then later on hit a "Play" button when I want it to start doing its thing again. Any suggestions?

  Read the article

• I/O intensive MySql server on Amazon AWS

  - by rhossi

  We recently moved from a traditional Data Center to cloud computing on AWS. We are developing a product in partnership with another company, and we need to create a database server for the product we'll release. I have been using Amazon Web Services for the past 3 years, but this is the first time I received a spec with this very specific hardware configuration. I know there are trade-offs and that real hardware will always be faster than virtual machines, and knowing that fact forehand, what would you recommend? 1) Amazon EC2? 2) Amazon RDS? 3) Something else? 4) Forget it baby, stick to the real hardware Here is the hardware requirements This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 1 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 2 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. Thanks in advance. Best,

  Read the article

• Setting up SSL on apache on linux ubuntu

  - by ThomasReggi

  I'm trying to get SSL to run on my apache web server. I do not have the DNS for the domain setup yet is that an issue? How do I setup SSL on my web server? When I start apache it fails. root@vannevar:/etc/apache2/ssl# service apache2 start * Starting web server apache2 Action 'start' failed. The Apache error log may have more information. The log stats that it's unable to read the certificate. [Thu Jun 28 15:01:02 2012] [error] Init: Unable to read server certificate from file /etc/apache2/ssl/www.example.com.csr [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218529960 error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag [Thu Jun 28 15:01:02 2012] [error] SSL Library Error: 218595386 error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error The contents of /etc/apache2/httpd.conf ServerName [SERVERIP] The contents of /etc/apache2/ports.conf # If you just change the port or add more ports here, you will likely also # have to change the VirtualHost statement in # /etc/apache2/sites-enabled/000-default # This is also true if you have upgraded from before 2.2.9-3 (i.e. from # Debian etch). See /usr/share/doc/apache2.2-common/NEWS.Debian.gz and # README.Debian.gz NameVirtualHost [SERVERIP]:443 NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> The contents of /etc/apache2/sites-available/www.example.com <VirtualHost *:80> ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost> <VirtualHost [SERVERIP]:443> SSLEngine On SSLCertificateFile /etc/apache2/ssl/www.example.com.csr SSLCertificateKeyFile /etc/apache2/ssl/www.example.com.key SSLCACertificateFile /etc/apache2/ssl/comodo.crt ServerAdmin [email protected] ServerName example.com ServerAlias www.example.com DocumentRoot /srv/sites/example.com/public/ ErrorLog /srv/sites/example.com/logs/error.log CustomLog /srv/sites/example.com/logs/access.log combined </VirtualHost>

  Read the article

• VMware networking - PortChannel or not?

  - by dunxd

  My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

  Read the article

• Filezilla FTP Server - Security Implications of its usage on Windos Server 2003

  - by Brian Webster

  I'm running Filezilla server on my dedicated windows 2003 server. It uses its own user-access control system. The Filezilla server service itself is running under the System user. When I setup users within the FTP Server Administrator Interface, I do not need to setup equivalent users, or adjust permissions on folders to allow users to login. Example: I setup TestFTP user with password 'p' I set the home directoy of TestFTP user to be e:/website I verify that e:/website only has permission for the System and Admin accounts (right click - security in windows explorer) TestFTP is able to login to the server just fine. I'm OK with this (perhaps due to ignorance?). Is it generally frounded upon to utilize a FTP Server such as FileZilla Server that bypasses the built-in UAC in this method? If I wasn't clear enough, please let me know.

  Read the article

• Changing The Text Selection Shortcuts on a Mac

  - by Berk U.

  I've recently switched over from a PC to a Mac and I'm wondering if there is any way to edit the text selection/deletion shortcuts on a Mac. I write a lot of code and I've found these shortcuts to be very helpful. Here is a quick overview of the deletion shortcuts (http://lifehacker.com/5803041/the-mac-os-x-delete-key-it-goes-both-ways); the selection shortcuts on the mac are similar, except that you can use arrow keys instead of delete. I'd be happy to learn of any method, though I would much prefer it if someone can come up with a way to do it using KeyRemap4MacBook.

  Read the article

• What's the simplest configuration of SVN on a Windows Server to avoid plain text password storage?

  - by detly

  I have an SVN 1.6 server running on a Windows Server 2003 machine, served via CollabNet's svnserve running as a service (using the svn protocol). I would like to avoid storing passwords in plain text on the server. Unfortunately, the default configuration and SASL with DIGEST-MD5 both require plain text password storage. What is the simplest possible way to avoid storing passwords in plain text? My constraints are: Path-based access control to the SVN repository needs to be possible (currently I can use an authz file). As far as I know, this is more-or-less independent of the authentication method. Active directory is available, but it's not just domain-connected windows machines that need to authenticate: workgroup PCs, Linux PCs and software that uses PySVN to perform SVN operations all need to be able to access the repositories. Upgrading the SVN server is feasible, as is installing additional software.

  Read the article

• Subnet mask and how to resolve IP range [duplicate]

  - by user2789433

  This question already has an answer here: How does IPv4 Subnetting Work? 5 answers If you click on this link WHO IS query You will see the results from a who is query for a random IP address. On the line "inetnum": "122.4.0.0/14", What does it mean for the prefix to be 14? I am using this as a reference Subnet Mask Cheatsheet While resolving it, I get a very wide range which is something like 122.7.0.0-122.4.0.0 I am not able to understand how the IP range is calculate from the subnet mask and I am only able to find calculators online and not a method to solve it.

  Read the article

• Using Apache / Kerberos / Keytab to Authenticate Redmine Users Against Active Directory

  - by David Kaczynski

  Please bare with me, as I am still fresh to these technologies. We have a Debian (squeeze) server to which I have root access. It is running Apache, and Redmine is deployed to the server (currently using a local MySQL database for authentication). Apache is configured to use Kerberos and a keytab file to authenticate users against Active Directory. With the current configuration, as soon as a user attempts to access anything over https, the user is prompted for a username / password, which is successfully authenticated against Active Directory. I understand (somewhat) that Redmine has its own LDAP configuration that can be used to authenticate users against an existing Active Directory, but this would require the user to enter their credentials one time for Apache and then a second time for Redmine. I am wondering, Can I somehow configure Redmine to share the Apache authentication method as opposed to requiring the user to enter their credentials a second time? (Using Apache to authenticate against Active Directory is a requirement for a separate application on the server)

  Read the article

• Problem with authentication of users via IE when using "host header value"

  - by Richard

  Hi, I'm trying to set multiple web sites up in an IIS 6. I've got a working virtual site residing under the default web site, but if I create a new web site in the IIS and asign it a host header value, let it point to the very same file structure as in the prevoiusly mentioned site and finally asign windows integrated security only to the site - I still cannot log in to the new site using MSIE 6 or 8 but FF 3.5 works fine. In the web log I get these entries if I access the localhost site 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1 127.0.0.1 GET /client/Default.asp - 80 xxx\Administrator 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 200 0 0 If I however access via the host headre value site I get prompted to login but the login fail and I also get an error "401 1 2148074252" which not present when it succeeds. Can this be the issue? Pre login screen 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 2 2148074254 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 post login screen (note that win credentials have not been submitted) 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 0 2009-11-19 09:15:59 W3SVC1793297778 127.0.0.1 GET / - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+Trident/4.0;+.NET+CLR+2.0.50727) 401 1 2148074252 Firefox will try to access using anonymous access and will prompt for login, after submitting win credentials it all works fine. For what reasoon is the IE so stubornly refusing to submit credentials to the "host header value" site? The site is in the Local intranet Zone and login is ticked for that zone. No teaming NIC's no FW, no nothing, I'm cluless :( /Richard

  Read the article

• Trackpad and battery on stop working at same time

  - by Alex Krycek

  Gateway E-475M G Windows 7 Professional SP1 Synaptics TouchPad 15.2.20.0 Microsoft ACPI-Compliant Control Method Battery 6.1.7600.16385 It seems that when my battery stops working correctly, my touchpad will also act erratically. Specifically, the computer will charge for a few seconds, then stop charging for another few seconds. This will continue for some time. But if I close the lid, the charging LED will stay lit. As for the touchpad, it'll click or highlight things at random when I can get it to move. As a test, I stopped charging my computer. Now it seems my touchpad is working fine. I've tried to reinstall both the battery and touchpad drivers. I've also started the computer in safe mode, but that didn't help either. Edit: I've now tried booting my computer with an Ubuntu live cd, and the charging problem persists. So, it now seems my computer can only charge continuously as long as it's turned off or sleeping.

  Read the article

• Getting rid of site-specific hotkeys

  - by ZyX

  How do I disable site-specific hotkeys if (and only if) they are already mapped in Opera? For example, I use <C-b> instead of <Right> and <C-h> instead of <BS>. On Stack Overflow/Super User they produce **strong text** and ## Heading ## respectively. I do not want this happen. I can examine Super User/Stack Overflow/some_other_site's javascript and write a userjs to do the job, but this method is not universal. I'm using Opera-10.51_pre6252 in Gentoo Linux.

  Read the article

• Can't log in via SSH to any accounts set to use /bin/bash as a default shell

  - by Gui Ambros

  I'm trying to install bash as the default shell on a ARM Linux running on an embedded device (Synology DS212+ NAS). But there's something really wrong, and I can't figure out what it is. Symptoms: 1) Root has /bin/bash as default shell, and can log in normally via SSH: $ grep root /etc/passwd root:x:0:0:root:/root:/bin/bash $ ssh root@NAS root@NAS's password: Last login: Sun Dec 16 14:06:56 2012 from desktop # 2) joeuser has /bin/bash as default shell, and receives "Permission denied" when trying to log in via SSH: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/bash $ ssh joeuser@localhost joeuser@NAS's password: Last login: Sun Dec 16 14:07:22 2012 from desktop Permission denied, please try again. Connection to localhost closed. 3) changing joeuser's shell back to /bin/sh: $ grep joeuser /etc/passwd joeuser:x:1029:100:Joe User:/home/joeuser:/bin/sh $ ssh joeuser@localhost Last login: Sun Dec 16 15:50:52 2012 from localhost $ To make things even more strange, I can log in as joeuser using /bin/bash using the serial console (!). Also a su - joeuser as root works fine, so the bash binary itself is working fine. In an act of despair, I changed joeuser's uid to 0 on /etc/passwd, but also didn't work, so it doesn't seem to be anything permission related. Seems that bash is doing some extra checking that sshd didn't like, and blocking the connections for non-root users. Maybe some sort of sanity checking - or terminal emulation - that is triggering the SIGCHLD, but only when called via ssh. I already went through every single item on sshd_config, and also put SSHD in debug mode, but didn't find anything strange. Here's my /etc/ssh/sshd_config: LogLevel DEBUG LoginGraceTime 2m PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile %h/.ssh/authorized_keys ChallengeResponseAuthentication no UsePAM yes AllowTcpForwarding no ChrootDirectory none Subsystem sftp internal-sftp -f DAEMON -u 000 And here's the output from /usr/syno/sbin/sshd -d, showing the failed attempt of joeuser trying to log in, with /bin/bash as the shell: debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: HPN Buffer Size: 87380 debug1: sshd version OpenSSH_5.8p1-hpn13v11 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: read PEM private key done: type ECDSA debug1: private host key: #2 type 3 ECDSA debug1: rexec_argv[0]='/usr/syno/sbin/sshd' debug1: rexec_argv[1]='-d' Set /proc/self/oom_adj from 0 to -17 debug1: Bind to port 22 on ::. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. debug1: Server TCP RWIN socket size: 87380 debug1: HPN Buffer Size: 87380 Server listening on 0.0.0.0 port 22. debug1: Server will not fork when running in debugging mode. debug1: rexec start in 6 out 6 newsock 6 pipe -1 sock 9 debug1: inetd sockets after dupping: 4, 4 Connection from 127.0.0.1 port 52212 debug1: HPN Disabled: 0, HPN Buffer Size: 87380 debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1-hpn13v11 SSH: Server;Ltype: Version;Remote: 127.0.0.1-52212;Protocol: 2.0;Client: OpenSSH_5.8p1-hpn13v11 debug1: match: OpenSSH_5.8p1-hpn13v11 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1-hpn13v11 debug1: permanently_set_uid: 1024/100 debug1: MYFLAG IS 1 debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: AUTH STATE IS 0 debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: client->server aes128-ctr hmac-md5 none SSH: Server;Ltype: Kex;Remote: 127.0.0.1-52212;Enc: aes128-ctr;MAC: hmac-md5;Comp: none debug1: REQUESTED ENC.NAME is 'aes128-ctr' debug1: kex: server->client aes128-ctr hmac-md5 none debug1: expecting SSH2_MSG_KEX_ECDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user joeuser service ssh-connection method none SSH: Server;Ltype: Authname;Remote: 127.0.0.1-52212;Name: joeuser debug1: attempt 0 failures 0 debug1: Config token is loglevel debug1: Config token is logingracetime debug1: Config token is permitrootlogin debug1: Config token is rsaauthentication debug1: Config token is pubkeyauthentication debug1: Config token is authorizedkeysfile debug1: Config token is challengeresponseauthentication debug1: Config token is usepam debug1: Config token is allowtcpforwarding debug1: Config token is chrootdirectory debug1: Config token is subsystem debug1: PAM: initializing for "joeuser" debug1: PAM: setting PAM_RHOST to "localhost" debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user joeuser service ssh-connection method password debug1: attempt 1 failures 0 debug1: do_pam_account: called Accepted password for joeuser from 127.0.0.1 port 52212 ssh2 debug1: monitor_child_preauth: joeuser has been authenticated by privileged process debug1: PAM: establishing credentials User child is on pid 9129 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 65536 max 16384 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request pty-req reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. debug1: Received SIGCHLD. debug1: session_by_pid: pid 9130 debug1: session_exit_message: session 0 channel 0 pid 9130 debug1: session_exit_message: release channel 0 debug1: session_by_tty: session 0 tty /dev/pts/1 debug1: session_pty_cleanup: session 0 release /dev/pts/1 Received disconnect from 127.0.0.1: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials Here you have the full output of sshd -dd, together with ssh -vv. Bash: # bash --version GNU bash, version 3.2.49(1)-release (arm-none-linux-gnueabi) Copyright (C) 2007 Free Software Foundation, Inc. The bash binary was cross compiled from source. I also tried using a pre-compiled binary from the Optware distribution, but had the exact same problem. I checked for missing shared libraries using objdump -x, but they're all there. Any ideas what could be causing this "Permission denied, please try again."? I'm almost diving in the bash source code to investigate, but trying to avoid hours chasing something that may be silly.

  Read the article

• Reinstall after a Root Compromise?

  - by Zoredache

  After reading this question on a server compromise, I started to wonder why people continue to seem to believe that they can recover a compromised system using detection/cleanup tools, or by just fixing the hole that was used to compromise the system. Given all the various root kit technologies and other things a hacker can do most experts suggest you should reinstall the operating system. I am hoping to get a better idea why more people don't just take off and nuke the system from orbit. Here are a couple points, that I would like to see addressed. Are there conditions where a format/reinstall would not clean the system? Under what types conditions do you think a system can be cleaned, and when must you do a full reinstall? What reasoning do you have against doing a full reinstall? If you choose not to reinstall, then what method do you use to be reasonably confident you have cleaned and prevented any further damage from happening again.

  Read the article

• How can I use Windows Firewall to only permit the Windows Update service to make an outbound connection?

  - by microsmash

  I'm trying to tailor my Windows Firewall settings (using the Windows Firewall with Advanced Security console) to only permit programs that need to access the Internet with an outbound connection to do so. This works fine for normal applications as I can just allow the program, but services that load in the svchost.exe process are a problem. The only services I actually need to give access to are Windows Update and the Background Intelligent Transfer Service (and even that, I would only like Windows Update to be able to submit jobs to, but that's another issue.) Is there a method to only allow these to be permitted an outbound connection, and not any of the other services loaded in svchost?

  Read the article

< Previous Page | 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028  | Next Page >