Search Results

Search found 33445 results on 1338 pages for 'single instance storage'.

Page 1048/1338 | < Previous Page | 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055  | Next Page >

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • F2 in Paste mode

    - by dotancohen
    Vim has a terrific paste mode, in which abbreviations and mappings are ignored. Frustratingly, even keys that do not map to pastable ASCII characters, such as the function keys, are pasted literally. For instance the key F2 is pasted as <F2>. Is there anyway around this? Note that pastetoggle can in fact be mapped to a function key to easily leave paste mode, however the function that I am writing changes other values when entering or leaving paste mode (such as enabling or disabling line numbers and other things). Therefore I would really like to find a workaround. For reference, here is the current version of the function (that gets stuck in paste mode): iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> " Triple-toggle Insert Modes: coding, prose, and paste let g:insertModeGlobal=1 function! Te() if g:insertModeGlobal==3 " Was in paste insert mode, go to coding insert mode set nu set nopaste let g:insertModeGlobal=4 endif if g:insertModeGlobal==2 " Was in prose insert mode, go to paste insert mode set nolinebreak nnoremap j j nnoremap k k nnoremap gj gj nnoremap gk gk set relativenumber execute ":Signs" iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> set nonu set paste let g:insertModeGlobal=3 endif if g:insertModeGlobal==1 " Was in coding insert mode, go to prose insert mode set linebreak nnoremap j gj nnoremap k gk nnoremap gj j nnoremap gk k set number execute ":DisableSigns" iab if if let g:insertModeGlobal=2 endif if g:insertModeGlobal==4 let g:insertModeGlobal=1 endif endfunction

    Read the article

  • Apache suddenly very slow on http and faster on https

    - by hsnm
    Background: I have Apache 2 running on ubuntu. There is a low usage on it and mostly being accessed for a web service URL from mobile apps. It was working fine until I installed SSL certificates. I now have both http and https. When I access the server using https, I get a fairly quick response (but probably not as fast as before). When I use http, it's so slow. What I tried: From this post: I curl localhost from the host and it takes some time, meaning there is no routing issue. The server runs on Amazon EC2 instance and is managed by me only. Also: I see that Apache once running, creates the maximum number of processes it is allowed to, which was not the case before. I lowered the MaxClients to 20 and I think I'm getting faster responses but it still takes over a minute and I always have MaxClients Apache processes. dmesg returns many [ 1953.655703] TCP: Possible SYN flooding on port 80. Sending cookies. When I netstat I get many entries with SYN_RECV. Possibly a DDoS attack? From EC2's monitoring diagrams I see a pattern of high "Maximum Network In (Bytes)" since 2 days ago. By the way the server is still being tested, the actual traffic is very low and not consistent. I tried to go with this solution to limit incoming connections using iptables, still no luck, but I'm trying. Question: What could be the problem? Is this a DDoS attack?

    Read the article

  • Run a rails server on Amazon EC2 [on hold]

    - by Jashwant
    Context: I've tried rubber gem, but that does not fulfill my requirements ( I needed to deploy on existing instance, so don't recommend me rubber) So, I followed this excellent tutorial http://stackoverflow.com/questions/15535140/installing-ruby-2-0-and-rails-4-0-0beta-on-aws-ec2 Now, I have ruby 2.0 and rails 4.0.0 running on AWS EC2. I successfully ran the server with RDS (mysql) as db and default webrick as server ( Using command rails server ) But, I've read that webrick is a development server and shouldn't be used at production. What I tried: I googled and came up with some alternatives. Capistrano Nginx / apache with passenger Passenger with Capistrano Unicorn Puma My Question: What exactly is capistrano / passenger ? Are they middleware to ease my deployment process ? I don't see any difficulty in doing rails server command. If they are just middleware, nginx with passenger and capistrano does not make any sense ? Why would I add a learning curve ( to learn nginx, passenger and capistrano configs) just to run my server ? I can just use nginx to deploy my app. Can't I ? What combination should I use on Amazon EC2 (or may be at any some other production server).

    Read the article

  • Help trying to figure out why IIS7 is crashing / locking up / denying connections

    - by Pure.Krome
    Hi folks, I've got a pretty busy website that is running on a single web front end machine, on W2K8 + IIS7. Every now and then - eg. maybe monday at 3am or something, then a few days later .. some early morning time .. then nothing for 2 weeks ... etc - the website fails to respond to any client connections. ie. no one can connect to the website. I can remote desktop to the machine, etc no probs. I restart the app pool (the website is running in intergrated mode), still nothing. I try and get a crash dump of the process (it's around 600 mb maybe even more) ... that fails after about a min of trying (and i have plenty of HD space). The only way to fix this issue, is to manually stop the www service and then start it again. The stopping takes a while (a minute?) while starting is nearly instant. I'm at a loss to figure out what part of my code is causing this. At first, I thought it might be a stack overflow because of some error that might be going to the error page, which in turn errors .. rinse repeat boom. But i've had a look at the error page and it feels ok. So, I'm hoping someone might be able to help and say how I can correctly get a proper dump of the IIS process so i can then do some more autopsy on it. I would email Tess Ferrandez (the goddess of crash debuging) but I thought I'd try here before I spam her. Can anyone have any suggestions to how I can figure out how to start to debug this issue?

    Read the article

  • DPM server 2010 Attach agent error : administrator privileges missing?

    - by Michael
    I’m hoping you would be able to help me out with this little problem I’m having. I installed DPM 2010 in our test environment to test backups on Exchange 2010 servers. The environment includes : 1xDC 2x Exchange Server 2010 1x DPM 2010 server All of these are running on Microsoft server 2008 R2 Virtual machines. The host machines are using Hyper-v. So the problem goes like this : 1- I tried to install the agents from the DPM server GUI, which failed saying I didn’t have the correct permissions. 2- So then I tried the manual installation using the commands from : the Microsoft site http://technet.microsoft.com/en-us/library/bb870935.aspx 3- The agent installation worked but when I get to attaching the agents to the DPM server it still gives me the error saying that the specified account does not have administrator rights. 4- I tried the Domain admin, users who are domain admin + local admin, single local admins. 5- I have turned off the windows firewall and made sure all the services are running. So now I’m out of ideas and really need help, the agent attach to the DPM server is the last thing that is holding me back from deploying everything to the production site. Any help would be really appreciated.

    Read the article

  • How to quickly check if two columns in Excel are equivalent in value?

    - by mindless.panda
    I am interested in taking two columns and getting a quick answer on whether they are equivalent in value or not. Let me show you what I mean: So its trivial to make another column (EQUAL) that does a simple compare for each pair of cells in the two columns. It's also trivial to use conditional formatting on one of the two, checking its value against the other. The problem is both of these methods require scanning the third column or the color of one of the columns. Often I am doing this for columns that are very, very long, and visual verification would take too long and neither do I trust my eyes. I could use a pivot table to summarize the EQUAL column and see if any FALSE entries occur. I could also enable filtering and click on the filter on EQUAL and see what entries are shown. Again, all of these methods are time consuming for what seems to be such a simple computational task. What I'm interested in finding out is if there is a single cell formula that answers the question. I attempted one above in the screenshot, but clearly it doesn't do what I expected, since A10 does not equal B10. Anyone know of one that works or some other method that accomplishes this?

    Read the article

  • Textmate add multiline text at end of line

    - by Yuval
    In Textmate, I am able to add text to several lines at once by clicking and holding the Option key and dragging with the mouse. say I have the following lines: foo 1: foo 2: foo 3: I can easily click and hold option and then drag down with the lines to select the text at the end of each line, and then type "bar" once and it will be added to all lines, as such: foo 1: bar foo 2: bar foo 3: bar Fantastic. The problem I run into, is when my lines aren't the same length, as such foo 19: foo 37842342346: foo 503: Now if I want to add text to the end of each line, I have to either do it manually, or choose enough space so that the longest line is not overwritten, as such: foo 19: bar foo 37842342346: bar foo 503: bar This results in a lot of unwanted whitespace in lines that don't need it. Granted, I could easily run a regular expression search to replace all multiple occurrences of a space with a single one, but I was wondering if there's a way to select all ending of lines at once without having to do that. Any idea? Thanks!

    Read the article

  • How to Deploy an ASP.NET Web API- and Browser-based Application to a Production Environment [closed]

    - by lmttag
    Possible Duplicate: How to Deploy an ASP.NET Web API- and Browser-based Application to a Production Environment We have an ASP.NET Web API server that serves up a SQL Server data driven website. The API uses JSON to transfer data from SQL Server to the front end. We need to move it to an internal production environment (nothing will be exposed on the public Internet) and we’re having problems - or just not understanding what needs to be done. There are two domains: The corporate domain - where all users login normally. The process domain - contains the database the Web API needs to access. The IT staff wants to put a DMZ between the two domains to house the IIS app and shield the users on the corporate domain from having access into the process domain directly. The ideal configuration is: corp domain (end users) <–> firewall (open port 80) <–> DMZ (web server running IIS) <–> firewall (open port 80 or 1433????) <–> process domain (IIS for Web API and SQL Server) We don’t really understand how to deploy our browser/Web API application in this scenario. Do we need to break up our application so that all the client code is on the IIS server in the DMZ, while the Web API gets installed on the server in the process domain? Does the entire app (client code and Web API) stay together on the IIS server in the DMZ, which then somehow accesses the SQL Server instance to get data? From the IIS server and app in the DMZ, would you simply access the Web API on the server in the process domain by going to http://server/appname/api/getitmes? In the second firewall between the DMZ and the process domain, would you have to open port 1433 or just port 80 since the Web API is a HTTP endpoint? Or, is there some better way of deployment (i.e., how ASP.NET Web API single page applications written all in HTML5 and JavaScript supposed to be deployed to production environments?)? NB: The servers are Win2k8 R2, SQL Server 2k8 R2, and IIS 7.5.

    Read the article

  • In APC+PHP, how much RAM is too much? Is it okay to set apc.shm_size to many GB?

    - by Jeremy Clarke
    On our server we have a LOT of RAM for our traffic levels (16GB). The HTTP processes regularly eat up all CPU and need to be restarted without even getting close to using swap memory, so I'm looking for ways to spend RAM to ease the load on Apache (and/or help the seperate MySQL server which may be breaking Apache). I have many WordPress installs on the HTTPD instance so APC sometimes uses as much as 900MB of ram (according to the apc.php charts). Just in case I have apc.shm_size set to 1600MB which is more than it needs but not more than I can spare. This means there is usually lots of extra RAM available to APC but also very little turnover and fragmentation is never more than 1%. Is this dangerous? Should I be slimming down APC to less than 1GB just on principle? Should I be expecting some turnover within APC in the name of bringing it's overall footprint down? Having so much memory devoted to APC means that in top/htop every single httpd process shows ~1.9GB in the VIRT memory column. Obviously this is shared memory and not used per-process, but could it be hurting our server? NOTE: The problem with the server remains unclear but the effect is that about 60 times a day all 8 CPU's fill up to 100% and everything stops working until Monit sees that Apache is broken and restarts it (Monin also saves the MySQL server). I'm not sure if APC is even part of the problem but I'm trying to optimize everything just in case.

    Read the article

  • Perfectly reproducable select statement default ordering issue....

    - by Dave
    Hi, I've recently been chasing an issue with a client's db... solution found, but impossible to recreate. Essentially, we're doing a Select * from mytable where ArbitraryColumn = 75 Where MyTable has an Identity column, called 'MyIndentityColumn' - incremented by one in each insert. Naturally, and normally I would assume that the order returned would be the order in which they are inserted (bad assumption, but one which was forced onto me, through an inherited application - which has been patched). Essentially, I would like suggestions as to why the database, when restored to my local machine (same OS, same SQL server version - 200 sp3) same collation, and same backup instance restored on it, as a test DB on the client site. When I perform the above select, I get them in order of insert (i.e. identity column ordered ascending). On the client, it seems random (but the same 'random' order each time)... A few other points: I have the same collation on my test server as client Same DB backup restored to a test only I can access Same SQL server version and service pack Same OS Test DB is a new DB - new log and MDF... I have the problem 'solved' by adding an explicit order by clause but I want to undertand the cause of the issue, given the exact nature of my attempts to recreate it beuing futile, and perfectly recreatable on the client server... Thanks in advance, Dave

    Read the article

  • Outlook 2007 + Exchange 2010 (Save All Attachments)

    - by RobertPitt
    About 3 weeks back our company upgraded our mail system to Exchange 2010, all went smooth, few issues but nothing major. A few days ago we had a call from a colleague where he was unable to save all attachments, From File > Save As > Save All Attachments. When the email has a single attachment it works perfectly normal, and depending on the file type it allows you to save multiple attachments. But there's a lot of file types that will not work, such as zip, pdf, doc etc, Usually we get a location box open up asking where we would like to drop the attachments, but it does nothing, You click Save All Attachments and nothing happens. After hours of research I have come across mixed results, a lot of people on forums have been explaining that they have recently crossed over to Exchange 2010 and there issues started there. But on the other hand Microsoft released a KB (278188) which was depressing if that, but that article was published in 2007, as stated by the time stamp, and Exchange 2010 has only come out recently. Im looking to see if you guys have any clues what could be causing this, anything server side that I can take a look at (AD, Exchange, ...). Any help on this is greatly supported

    Read the article

  • Web based KVM management for Ubuntu

    - by Tim
    We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim Update: Anyone have any suggestions? It's awfully quiet here..

    Read the article

  • Setting umask for all users

    - by Yarin
    I'm trying to set the default umask to 002 for all users including root on my CentOS box. According to this and other answers, this can be achieved by editing /etc/profile. However the comments at the top of that file say: It's NOT a good idea to change this file unless you know what you are doing. It's much better to create a custom.sh shell script in /etc/profile.d/ to make custom changes to your environment, as this will prevent the need for merging in future updates. So I went ahead and created the following file: /etc/profile.d/myapp.sh with the single line: umask 002 Now, when I create a file logged in as root, the file is born with 664 permissions, the way I had hoped. But files created by my Apache wsgi application, or files created with sudo, still default to 644 permissions... $ touch newfile (as root): Result = 664 (Works) $ sudo touch newfile: Result = 644 (Doesn't work) Files created by Apache wsgi app: Result = 644 (Doesn't work) Files created by Python's RotatingFileHandler: Result = 644 (Doesn't work) Why is this happening, and how can I ensure 664 file permissions system wide, no matter what creates the file? UPDATE: I ended up finding a cleaner solution to this on a per-directory basis using ACLs, which I describe here.

    Read the article

  • At what point does the performance gap between GPU & CPU become so great that the CPU is holding back a system?

    - by Matthew Galloway
    I know that generally speaking for gaming performance the GPU is the primary factor which holds back performance, with everything else such as RAM/motherboard/PSU/CPU being secondary in importance to the graphics card. But at some point the other components ARE going to be significant in holding back the whole system! For instance nobody would be silly enough to play modern games with 512MB RAM and the very latest graphics cards (such as an HD7970) as I bet the performance increase over such a system with only 512MB but a mid range card would be non-existent! Thus it would be a "waste" for such a person to buy any high end graphics card without resolving first the system's other problems. The same point applies to other components, such as if it only had a Pentium II a current high end graphics card would be wasted on it! So my core question is how do you determine at what point for your system is spending on extra GPU power be completely "wasted"? (also, a slightly more nuanced question is trying work out at what point might the extra graphics power not be "wasted" but would be "sub optimal" value for money, when the expenditure should then be split around graphics card and other components. As obviously a gamer shouldn't always just spend on upgrading the graphics card! But needs to balance it out)

    Read the article

  • Is there a utility to visualise / isolate and watch application calls

    - by MyStream
    Note: I'm not sure what to search for so guidance on that may be just as valuable as an answer. I'm looking for a way to visually compare activity of two applications (in this case a webserver with php communicating with the system or mysql or network devices, etc) such that I can compare the performance at a glance. I know there are tools to generate data dumps from benchmarks for apache and some available for php for tracing that you can dump and analyse but what I'm looking for is something that can report performance metrics visually from data on calls (what called what, how long did it take, how much memory did it consume, how can that be represented visually in a call stack) and present it graphically as if it were a topology or layered visual with different elements of system calls occupying different layers. A typical visual may consist of (e.g. using swim diagrams as just one analogy): Network (details here relevant to network diagnostics) | ^ back out v | Linux (details here related to firewall/routing diagnostics) ^ back to network | | V ^ back to system Apache (details here related to web request) | | ^ response to V | apache PHP (etc) PHP---------->other accesses to php files/resources----- | ^ v | MySQL (total time) MySQL | ^ V | Each call listed + time + tables hit/record returned My aim would be to be able to 'inspect' a request/range of requests over a period of time to see what constituted the activity at that point in time and trace it from beginning to end as a diagnostic tool. Is there any such work in this direction? I realise it would be intensive on the server, but the intention is to benchmark and analyse processes against each other for both educational and professional reasons and a visual aid is a great eye-opener compared to raw statistics or dozens of discrete activity vs time graphs. It's hard to show the full cycle. Any pointers welcome. Thanks! FROM COMMENTS: > XHProf in conjunction with other programs such as Perconna toolkit > (percona.com/doc/percona-toolkit/2.0/pt-pmp.html) for mySQL run apache > with httpd -X & (Single threaded debug mode and background) then > attach with strace -> kcache grind

    Read the article

  • Why is my Mac not displaying anything to my LCD tv using HDMI?

    - by Pure.Krome
    Hi folks, I've got an iMac desktop computer. Love it. I wish to connect it to my LCD TV using HDMI. There is no HDMI output on the iMac so i had to buy one of these bad boys :- so now I can output video (via the mini Display Port) and sound (via USB) through this box, to my LCD. Works great ... with a single direct cable. I have another 3 or 5 metre cable inserted into my wall, so i do not have to have a silly hdmi cable floating in the air between my iMac and my LCD TV. When I do this, there is no picture. To better explain all of this, i made a quick video explaining my problem in detail, so you can exactly see what is going on/wrong. I've also tried changing the output format for the TV from 1080i down to 720p and even lower .. incase the cable in the wall doesn't allow 1080i. here's the video with the full explanation :- http://www.youtube.com/watch?v=ZkKRKnRIh6Q (NOTE: I incorrectly said in the video that the hidden wall cable is 10 metres long. me == fail. It's 3m or 5m...). Can someone please watch it and suggest some ideas to getting it working?

    Read the article

  • nginx proxying different servers for different subdomains

    - by The.Anti.9
    i just set up an nginx server. On the same computer as nginx, I have apache running on port 8000 (this was previously set up.) and I want no subdomain and the www. subdomain to go to the local apache instance. But i want the stuff. subdomain to link to my server where i keep all my miscellaneous files (pictures, documents, etc.), which is also listening on port 80 at the ip 192.168.1.102. I tried configuring it, but when i go to my domain, I just get the "Welcome to nginx!". Here's what I have: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/conf.d/*.conf; server { listen 80; server_name theanti9.com www.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://localhost:8000; } } server { listen 80; server_name stuff.theanti9.com; access_log /var/log/nginx/access.log; location / { proxy_pass http://192.168.1.102:80; } } } I'm not really sure what's wrong. Any suggestions?

    Read the article

  • My bios datetime is resetting to 2002, what should I do?

    - by Thierry Lam
    I bought my PC brand new in mid-2006. I'm currently dual booting Win XP 32 bits and Ubuntu Karmic Desktop. Over the last few days, when I boot up my computer, it tells me that my bios time is not set. I now have 2 choices for booting in: Windows first: I can safely get into Windows but the date now shows 2002/01/01 at 00:00. From there, Windows will not sync its time to its servers, I have to manually advance the date myself. I can also advance the date from the bios at startup. Ubuntu first: Since the time date is still set at 2002, the boot system cannot find my linux partition. I can fix that issue by booting to Windows, set the date properly and the linux issue will be fixed automatically. The above two issues can also be fixed if I manually set the bios date/time manually when I turn on my computer. It's annoying to do that every single day since I shut down my PC daily. Am I having an OS issue or a hardware issue? How can I resolve this problem?

    Read the article

  • How to connect AD Explorer from Sysinternals to Global Catalog

    - by Oliver
    I'm using the sysinternals AD Explorer quite frequently to search and inspect an Active Directory without any big problems. But now i'd like to connect not only to a single AD Server. Instead i like to inspect the global catalog. If i enter within the AD Explorer connect dialog only the dns name of the machine (e.g. dns.to.domain.controller) that is serving the global catalog i only receive the concrete domain for which it is responsible, but not the whole forest (that's normal behaviour and expected by me). If i'm going to add the default port number (3268) for the global catalog in the form dns.to.domain.controller:3268 AD Explorer will simply crash without any further message. The global catalog itself works as expected under the given name and port number, cause our apache server use exactly this address and port number to authenticate some users. So any hints or tips to access the global catalog out of AD Explorer? Or there are any other nice tools like AD Explorer out there that doesn't have any problems to access the global catalog?

    Read the article

  • My PC suddenly doesn't detect the primary drive (SSD)

    - by smoth190
    My computer has been working fine for months, and it worked today, but tonight I went to start it up to find that my OCZ Vertex 2 isn't being found. When I turn on my computer, the loading screen gets stuck at "Detecting IDE drives...". After a while, it keeps going and lists the drives it finds. The first one in the list should be my Vertex 2, but it just says "None". The computer proceeds to get stuck on "Loading operating system...", which is understandable because the drive with the OS is "gone". My first thought was drive failure, but every time drives have crashed on me, they're still detected--they just don't work. This drive is an SSD, it's pretty new, and I had no problems beforehand. I find it hard to believe it failed. I'm sure it's possible, but I hope this isn't the case. There has been nothing strange going on at all with my PC, it's been running perfect until now. I was just about to do my monthly dskchk and defrag today. I popped in my Windows 7 Home Premium disk and booted from it. When I launched the repair tool, it didn't list any operating systems (because the drive is 100% missing...). When I've had disks crash before, it still listed the OS, you just couldn't do anything with it. I tried to restore from an image, but I don't have any of those, either. I opened the command console and listed the drivers with wmic logicaldisk get name. Only C: and D: came up. C: was my 1TB storage driver (luckily, all my stuff is here--only the OS is on the SSD!) and D: was the disk driver. So I still had an MIA drive... The SSD didn't come with any driver disks, so I can't install drivers. If there's a way to do this from a CD I can burn with my other PC, please let me know. What the heck do I do? Although only the OS is on my SSD, a new SSD is expensive. I'll probably also have to buy a new copy of Windows (an upgrade would be nice, though...) because I've found it eats my registration key when my PC crashes (and my thousands of dollars of Adobe programs, I'll be on the phone with tech support for a week to get those keys back). And I'll lose my registry, all my settings, all sorts of other stuff that I'll spend weeks restoring. My computer is a pain in the butt to take out and open up, so if I can't fix it, I'll try fiddling with the plug or putting it into a new computer, but not right now. Any help is greatly appreciated! The day when they make crash-less drives will be the day I live without worry.

    Read the article

  • SQL Server Subscriber Migration

    - by SuperCoolMoss
    We're currently have one way transaction replication from a SQL Server 2005 OLTP publisher/distrbituor to two subscribers (one SQL 2005 and the other SQL2008 R2). Replication security is via the SQL Agents' domain service account (the same account is used on all boxes). The SQL2008R2 subscriber is used for BI purposes and hosts a database that has a subset of the Production publisher database tables, with different security and indexes. We need to migrate this BI subscriber to a newer box with more performant hardware. The plan is as follows: Stop replicating to the BI box (continue replicating to the other subscriber). Backup all databases on the BI box (including system databases). Restore all databases (including master in single user mode) to the new BI box (this has SQL Server 2008R2 already installed). Take the old BI box off the network and shut it down. Rename and Re-IP the new BI box to be the same as the old box. Switch replication back on. Are there any flaws in this approach?

    Read the article

  • NVidia TwinView - slow rendering on dual desktop

    - by lisak
    Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • Apache Virtual Hosts behind Cisco Router

    - by Theo
    I'm setting up an Apache 2.2 Ubuntu web server for internal services that is also supposed to be accessed from outside our LAN. Our LAN has a single external IP that is the external IP of our RV042 Cisco router. We have set up several A records on our external DNS server that point to this IP. Our internal DNS server resolve the same records to the internal IP of our web server, so computers from inside the network can access them using the same address as if they were outside. We forwarded the router's external 80 port to our web server's 80 port. I have set up one Virtual Host for each domain name in our list, and my httpd.conf is something like this: ServerName web.domain.com NameVirtualHost *:80 <VirtualHost *:80> ServerName alfresco.domain.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://localhost:8080/alfresco ProxyPassReverse /alfresco http://localhost:8080/alfresco ProxyPass /share http://localhost:8080/share ProxyPassReverse /share http://localhost:8080/share </VirtualHost> <VirtualHost *:80> ServerName crm.domain.com DocumentRoot /var/www/sugarcrm </VirtualHost> Now, this works if we are in our LAN. However, if we are outside of our LAN we reach our web server's default page saying: It Works! This is the default web page for this server. But we can't reach the virtual hosts, as if the domain name is not being preserved when the router forward the packets to the web server. Am I doing something wrong? How can I check what is going on? What should be the settings to make this work from outside?

    Read the article

  • WSUS performance for unneeded updates

    - by mhouston100
    We have a WSUS server serving around 300 PC's and a couple of dozen servers and a discussion came up at work as to what products to include. We have a single SQL 2005 instance on one of the servers and it has NEVER been updated. My first thought was to just tick the box for SQL 2005 and let WSUS do it's thing to upgrade to the latest service pack at least. One of the other guys here has the opinion that having updates that are relevant to only a small selection of hosts would effect the performance of WSUS as a whole, claiming that each update does a 'check' against all the hosts or something similar. My argument is that manually updating these servers is obviously not working as the admins are not paying attention to what is needed. So my question is: Do updates that only effect a sub-set of the hosts effect the overall performance of the WSUS server in relation to ALL the hosts? (disk space is not an issue at this point) Is there any performance justification for or against manually updating small amounts of products? Basically I'm needing a rebuttal against his argument and I'm unable to find any concrete documentation to prove him wrong.

    Read the article

< Previous Page | 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055  | Next Page >