Search Results

Search found 4068 results on 163 pages for 'intel pentium4'.

Page 106/163 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • Is 850W SMPS enough for the below Config?

    - by bali208
    We are planing to assemble a file server of the following configuration. 1) Intel S2400SC2 Motherboard. 2) Xeon 2407 Processor x 2 (Dual Processors) 3) 8gb x 8 ECC DDR3 RAM 4) One 2 TB Seagate HDD. 5) 8 cabinet fans fitted for NZXT Switch 810 Cabinet. Our question is is CoolerMaster 850 Watts power supply enough for our machine? Or we have to put 1050 Watts power Supply? Please suggest the best Brand and Wattage of SMPS we have to buy for our system. Thank you.

    Read the article

  • HDD vanished after wakeup from standby

    - by Sam
    In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

    Read the article

  • How do I know which hardware components are compatible when building a computer?

    - by darkie15
    I am trying to setup my own new computer. I haven't done this before and hence needed guidance from all here. I can google out the results for steps to follow for setting up my machine, but I do not understand what components are compatible with each other? For example there must be specific models of motherboard that are compatible with Intel Core i5-2500K Sandy Bridge 3.3GHz. In general, if there is a website that can guide me on all compatible components, that would be great. If not, how would I be able to check compatibility?

    Read the article

  • Cannot find my hard disk while installing linux-“No root file system defined” error

    - by Syam Kumar S
    I am trying install Linux on my computer (tried Ubuntu 10.4 and Linux Mint 9). I started the installation wizard and on the hard disk selection page the hard disk is not displayed. I have a 500GB disk with 5 partitions and windows 7 ultimate in one partition. If I click the forward button, it shows an error- "No root file system defined". I have tried to install by booting from CD and pendrive but both shows the same error. When I load Linux as live CD it doesn't show the hard disk. My hard disk works fine in windows 7. System config: intel i3 2100, 500GB hdd, 2GB ram

    Read the article

  • Best way to backup and restore millions of files

    - by bongo
    Hi, I'm facing a rebuilding of the volume on which I host the mail storage (kerio mailserver, which uses maildirs). I need to backup and restore as quick as possible the 3.5+ millions (for about 600GB) small files of the store directory. It takes more than 12 hours via rsync to a NFS share, but I also have a 1TB firewire 800 raid1 disk that I can use (from some preliminary tests it's faster). I'm working off a XServe intel. What is the fastest way to do it? Rsync? Finder copy? tar?

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • PSU Suggestions for SLI EVGA GTX 680 + i7

    - by JMH
    So i am putting together a new machine and am trying to determine the best PSU to go with for this setup. Here is the build i am thinking about Processor Intel Core i7-3770K Ivy Bridge 3.5GHz Motherboard ASRock Z77 Professional Graphics Card (2 SLI) EVGA 02G-P4-2680-KR Sound Card HT | OMEGA eClaro 7.1 Fan/Heat Sync ZALMAN CNPS9500A-LED Case COOLER MASTER HAF X RC-942-KKN1 RAM G.SKILL Ripjaws X Series 32GB (4 x 8GB) SSD Of some Sort So my guess is that i need a 750 -1000W PSU, but which brand.... how much, etc --- really in the woods. Thanks -Josh

    Read the article

  • Options for gaming remotely on a LAN?

    - by Schwern
    I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

    Read the article

  • taskmgr.exe 100% CPU Usage

    - by Burnsys
    Hi. I have 2 IBM servers Intel Xeon Dual core with 2gb RAM. the problem is that Taskmanager uses one full core when i open it. The same happens when i copy files in the explorer. OS: Windows 2003 Server Things i tried: Installed all updates They has kaspersky anti virus and they previously had Nod32. All drivers installed OK. All unused devices are disabled in the bios. Reinstalled win 2003 SP2. No conflict in drivers Tried opening via remote desktop and the problem continues. The cpu utilization is in the Kernel Times (Red in taskmanager) If i open Proces Explorer and i navigate to the threads consuming CPU the stack traces ends always in "NtkrnlPA!UnexpectedInterrupt", all threads stacks end in "UnexpectedInterrupt" ntoskrnl.exe!KiUnexpectedInterrupt+0x48 ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!CcSetReadAheadGranularity+0x1ff9 ntoskrnl.exe!IoAllocateIrp+0x3fd ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!NtWaitForSingleObject+0x94 ntoskrnl.exe!DbgBreakPointWithStatus+0xe05 ntdll.dll!KiFastSystemCallRet kernel32.dll!WaitForSingleObject+0x12 taskmgr.exe+0xeef6 kernel32.dll!GetModuleHandleA+0xdf Any help would be appreciated!

    Read the article

  • How to compare speed of graphics cards in Windows desktop environment?

    - by Al Kepp
    I use Windows 7 and Intel Core i3 CPU with integrated graphics. My problem is that it eats valuable system RAM for display. I can replace it with an old PCIe Radeon X700, so all system RAM will be usable for applications. The question is if an old Radeon X700 is comparable in W7 desktop speed to a new integrated i3 graphics. Are there any test programs which compare the speed of graphic cards in Windows 7 desktop environment (i.e. no Direct3D games, just Windows desktop)? (According to Tomshardware, Radeon X700 is probably even faster than Core i3 in 3D. But there are no native WDDM 1.1 W7 drivers for X700, only WDDM 1.0 Vista drivers are available.)

    Read the article

  • Boot Vista x64 with both ICH8 and ICH10 AHCI support

    - by adurity
    I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

    Read the article

  • GIMP Slow Startup

    - by muntoo
    Is there any way to speed up GIMP's startup time on Windows Vista Home Premium 32-Bit 1.6 [Dual] Intel Processors? On XP [different computer], it loads in less than 3 seconds. On Vista, it takes 20 seconds: 2 Seconds (other - fonts, brushes, etc) 18 Seconds (extension-script-fu) It just freezes at extension-script-fu. Looking at ProcessExplorer (or Task Manager, whatever), I see that it's not taking any CPU. EDIT: it does seem to be taking 50% of the CPU. It gets stuck for about 18 seconds, then starts working again, and the actual GIMP program pops up [...finally]. I have the latest stable version running (I think). I tried it with XP SP2 Compatibiliy mode and/or Run As Administrator, but that didn't help. EDIT: One way would be to disable script-fu. Does anyone know how to disable it at startup? (NOTE: Just wanted to point out that the title and the tags are the same. :D )

    Read the article

  • Does HP 8530w support Wifi 802.11n?

    - by FoxyBOA
    According to vendor site HP 8530w supports 802.11n draft mode. My Windows 7 tell me that network card is 5100 ABG and know nothing about N mode (guys from Intel forum mentioned, that 802.11N versions must ended with N letter, e.g. 5100 ABN). Not sure if it matter, but my laptop model id is #FU462EA. How could I check that my Wifi card compliant with 802.11n (I suspect that "draft N" could have two "special" meaning: doesn't work with 802.11n at all or requires special activation of the mode). Any hints are welcome.

    Read the article

  • Problem with Lenovo x200s Wifi under Ubutu Karmic

    - by oneself
    Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

    Read the article

  • Samsung 830 very slow benchmark numbers

    - by alekop
    I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

    Read the article

  • ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

    - by TecBrat
    The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

    Read the article

  • 59 vs 60 hertz on external display via DisplayPort

    - by Shiki
    Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

    Read the article

  • Force the computer to always use current display settings

    - by sazpaz
    So I'm having a terrible black screen problem with my new installation of Windows 8. The screen basically goes to black every time I turn it on or sleep, or connect to an external or monitor. I dont really know what steps actually cause the problem and cant seem to figure what steps allow the screen to come back, besides forcing restarts, going to sleep and waking up, and smashing Win + P. I have a strong feeling it's because the Switchable graphics I have (Intel HD + Radeon 5060), so I'm looking for a way to make the computer always use a specified mode (i.e the current mode I'm on, that does show stuff on the screen) and force it to use it everytime? Any ideas? EDIT: I've Installed all the latest drivers I've found. Tried most of the solutions around the web for this problem. Updated the BIOS to UEFI (from HP Support Assistant), etc. Laptop is an HP- Envy 14

    Read the article

  • Slow internet using Arch Linux

    - by GZaidman
    after a week or so of using Arch Linux I cant access the internet - it takes around 5 mins to load google (most of the other websites just give me a timeout), pacman's downloading speed range between 5-2Kbs, and pinging google takes around 9Kms. I'm connected using wireless network (wifi card is Intel Ultimate 6300 and router is Edimax 6524n). Every other Windows machine that's connected to the network (and even the T410 running Windows) is fine, so the problem lies in Linux. So far, i checked the resolv.conf file (my router ip address is listed), and the hosts file (pretty much default), and I disabled the ipv6 module. None of that helped. PS: i'm using NetworkManager (but the problem still occurs when connecting using wicd) running on Gnome3. Thanks in advance for any help you can provide! EDIT: something really strange happens whenever I ping google: i get an unknown host 'google.com', but the bit rate from the card jumps at the exact second I ping google (so far, the bit rate jumped to 54Mb/s from 1Mb/s over the course of 4 pings).

    Read the article

  • How to add higher video resolution in Ubuntu 10.04 (UNR on EEE1101HA)

    - by lexu
    I picked up an ASUS EEE 1101HA with Windows 7 and installed UBUNTU 10.04 Netbook Remix (dual boot). Ubuntu runs fine, but it doesn't recognize that the notebook LCD is 1388x768 and thus only offers 1024x768 and 800x600 as monitor resolution. So .. how can I tell it about that higher resolution? (Have root pwd & vi, una-bash-ed to use both.. ) UPDATE there is currently (early May 2010) no video-driver for the Intel GMA500 "Poulsbo" => no solution exists for now.

    Read the article

  • Mecer laptop gives me a white screen when I close the screen

    - by Dane Rossenrode
    I'm having a very strange hardware issue with my Mecer m770u laptop with intel i7 quad core, etc... I'm wondering if anyone has had this issue with any other brand/model of laptop, and what I should fix/replace to solve it...? Basically when I close the screen of the laptop, the screen often goes completely white. If I open it slowly and smoothly again, the screen returns to normal. But if I close the screen when the computer is off, and then switch it on, it boots with a white screen, and opening it slowly/smoothly doesn't help. I have to then switch it on and off a few times before it returns to normal. Makes travelling with my laptop really difficult! Any suggestions?

    Read the article

  • off-the-shelf HDD in Dell Optiplex 755 - Invalid Replacement - Press F1 when rebooting

    - by Eric Liprandi
    Hi, I recently put an SSD into my work Optiplex 755. Since then, every time the system boots or reboots, I get prompted to hit F1 to continue with a message like HDD replacement is not valid. The system works just fine. What I am gathering from Dell's website is that I left the original drive internally as a data drive. And apparently the Optiplex does not support 2 drives in the configuration we purchased originally and complains. Any suggestions on how to get rid of this message? some suggested the MEBx or whatever from Intel and to turn it off, but I did not succeed earlier. It's not a big deal 80% of the time, but I regularly work from home and occasionally need to fire a reboot and well, you don't get the BIOS screen remotely :) Regards, Eric.

    Read the article

  • Is there a test to see if hardware virtualization (vmx / xvm) are presently enabled within a Linux session?

    - by Dr. Edward Morbius
    I'm writing procedures for configuring VirtualBox support for 64-bit SMP guests, which requires hardware virtualization suppot (VTx/Intel, AMD-V/AMD). I have successfully configured this myself, however I'd like the procedure to be clear. sed -ne '/^flags/s/^.*: //p' /proc/cpuinfo | egrep -q '(vmx|svm)' && echo Has hardware virt || echo No HW virt ... shows if the CPU is capable. I've still got to go enable the feature in BIOS. Any way to test from within Linux to see that this is no or not? Thanks.

    Read the article

  • Can't find onboard NIC with windows server 2008

    - by Sanarothe
    Hi. I'm trying to setup a windows server, but I can't seem to get it to install ethernet drivers :( motherboard is ms-6743 chipset 82865g/pe/p(intel) The MSI drivers specifically for this motherboard are bad links. Not surprising... MSI is rarely helpful. Sisoft Sandra doesn't see any network devices, and all of my leads to drivers have reported that there is no network adapter to install a driver for. The light is ON on the mobo, the onboard setting in bios is ON and the computer worked just fine with a standard install of windows 7 about a month ago. I don't know what to do :(

    Read the article

  • Ruby Rails Mongrel Sever failing to serve OXS1.6

    - by Mark V
    Hi there I'm fairly new to Rails and the Mac, and doing my first deploy... I'm trying to set up my rails app on a brand new Apple mini-server running OXS1.6 (Snow Leopard). It is currently running fine on my new iMac i7 (same OS). I start mongrel with this command: mongrel_rails start -e production -p 3000 -d -a 127.0.0.1 --debug And it starts giving this output in the log/mongrel.log ** Daemonized, any open files are closed. Look at log/mongrel.pid and log/mongrel.log for info. ** Starting Mongrel listening at 127.0.0.1:3000 ** Installing debugging prefixed filters. Look in log/mongrel_debug for the files. ** Starting Rails with production environment... /Library/Ruby/Gems/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:119:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:9: warning: already initialized constant ID_PREFIX /Users/danadmin/ServiceApp/ServiceApp/app/helpers/input_grid_manager.rb:10: warning: already initialized constant ADD_ID ** Rails loaded. ** Loading any Rails specific GemPlugins ** Signals ready. TERM => stop. USR2 => restart. INT => stop (no restart). ** Rails signals registered. HUP => reload (without restart). It might not work well. ** Mongrel 1.1.5 available at 127.0.0.1:3000 ** Writing PID file to log/mongrel.pid The output is the same on my dev iMac (including the warnings). The difference is that accessing http://127.0.0.1:3000 on my iMac serves up the app's login page. Where as on the mac mini-server accessing the same results in this error 500 text from mongrel: "We're sorry, but something went wrong." It's as if rails is not working. I'm pretty good at figuring things out if I have some log file messages to direct me, but mongrel.log has no error message (the output remains the same as above), and the log/production.log is empty (which makes me think rails has not started?). My gems are all the same versions between machines and so is the app code; and there are no clues I can see in any of the mongrel_debug logs, except that rails.log on the mac mini-server and the iMac are different. After a start and single access, first is the rails.log from the mac mini-server: D, [2010-04-15T13:45:34.870406 #6914] DEBUG -- : TRACING ON Thu Apr 15 13:45:34 +1200 2010 Thu Apr 15 13:46:08 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_CACHE_CONTROL: max-age=0 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_0; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive While on my iMac it seems the same except for the addition of the HTTP_COOKIE and the HTTP_IF_NONE_MATCH, here is rails.log from my iMac # Logfile created on Thu Apr 15 13:41:42 +1200 2010 by logger.rb/22285 D, [2010-04-15T13:41:42.934088 #2070] DEBUG -- : TRACING ON Thu Apr 15 13:41:42 +1200 2010 Thu Apr 15 13:42:05 +1200 2010 REQUEST / --- !map:Mongrel::HttpParams SERVER_NAME: 127.0.0.1 HTTP_ACCEPT: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_HOST: 127.0.0.1:3000 HTTP_USER_AGENT: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.9 Safari/533.2 REQUEST_PATH: / SERVER_PROTOCOL: HTTP/1.1 HTTP_IF_NONE_MATCH: "\"216cc63ce3c1f286ef8dd4f18f354f6e\"" HTTP_ACCEPT_LANGUAGE: en-US,en;q=0.8 REMOTE_ADDR: 127.0.0.1 PATH_INFO: / SERVER_SOFTWARE: Mongrel 1.1.5 SCRIPT_NAME: / HTTP_COOKIE: _ServiceApp_session=BAh7DDonY3VzdG9tZXJfbGlzdF9maWx0ZXJfam9iX3N0YXR1c19pZGn6Og9zZXNzaW9uX2lkIiU0ZTk1ZWZjMmViMGU3NjE2YzA0NDc2YTkxYzJlNDZiOToaY3VycmVudF9jdXN0b21lcl9uYW1lIilUSEUgQ1VTVE9NRVIgTkFNRSBORUVEUyBUTyBCRSBMT0FERUQ6EF9jc3JmX3Rva2VuIjFuT1JMUWk0NlZrWlM3c2lUN3BaWCs5NkhRajhxYnFwRnhzVHVTWXEvUWY0PToZam9iX2xpc3RfZmlsdGVyX3RleHQiADogam9iX2xpc3RfZmlsdGVyX2VtcGxveWVlX2lkafo6HmN1c3RvbWVyX2xpc3RfZmlsdGVyX3RleHQiAA%3D%3D--d01bc5d0b457ad524d16cb3402b5dfed9afce83d HTTP_VERSION: HTTP/1.1 REQUEST_URI: / SERVER_PORT: "3000" HTTP_ACCEPT_CHARSET: ISO-8859-1,utf-8;q=0.7,*;q=0.3 REQUEST_METHOD: GET GATEWAY_INTERFACE: CGI/1.2 HTTP_ACCEPT_ENCODING: gzip,deflate,sdch HTTP_CONNECTION: keep-alive Any direction or ideas would be greatly appreciated. Thanks.

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >