Search Results

Search found 28223 results on 1129 pages for 'view controller'.

Page 1066/1129 | < Previous Page | 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073  | Next Page >

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• Integrating Code Metrics in TFS 2010 Build

  - by Jakob Ehn

  The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications.  This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

  Read the article

• Why does setting a geometry shader cause my sprites to vanish?

  - by ChaosDev

  My application has multiple screens with different tasks. Once I set a geometry shader to the device context for my custom terrain, it works and I get the desired results. But then when I get back to the main menu, all sprites and text disappear. These sprites don't dissappear when I use pixel and vertex shaders. The sprites are being drawn through D3D11, of course, with specified view and projection matrices as well an input layout, vertex, and pixel shader. I'm trying DeviceContext->ClearState() but it does not help. Any ideas? void gGeometry::DrawIndexedWithCustomEffect(gVertexShader*vs,gPixelShader* ps,gGeometryShader* gs=nullptr) { unsigned int offset = 0; auto context = mp_D3D->mp_Context; //set topology context->IASetPrimitiveTopology(m_Topology); //set input layout context->IASetInputLayout(mp_inputLayout); //set vertex and index buffers context->IASetVertexBuffers(0,1,&mp_VertexBuffer->mp_Buffer,&m_VertexStride,&offset); context->IASetIndexBuffer(mp_IndexBuffer->mp_Buffer,mp_IndexBuffer->m_DXGIFormat,0); //send constant buffers to shaders context->VSSetConstantBuffers(0,vs->m_CBufferCount,vs->m_CRawBuffers.data()); context->PSSetConstantBuffers(0,ps->m_CBufferCount,ps->m_CRawBuffers.data()); if(gs!=nullptr) { context->GSSetConstantBuffers(0,gs->m_CBufferCount,gs->m_CRawBuffers.data()); context->GSSetShader(gs->mp_D3DGeomShader,0,0);//after this call all sprites disappear } //set shaders context->VSSetShader( vs->mp_D3DVertexShader, 0, 0 ); context->PSSetShader( ps->mp_D3DPixelShader, 0, 0 ); //draw context->DrawIndexed(m_indexCount,0,0); } //sprites void gSpriteDrawer::Draw(gTexture2D* texture,const RECT& dest,const RECT& source, const Matrix& spriteMatrix,const float& rotation,Vector2d& position,const Vector2d& origin,const Color& color) { VertexPositionColorTexture* verticesPtr; D3D11_MAPPED_SUBRESOURCE mappedResource; unsigned int TriangleVertexStride = sizeof(VertexPositionColorTexture); unsigned int offset = 0; float halfWidth = ( float )dest.right / 2.0f; float halfHeight = ( float )dest.bottom / 2.0f; float z = 0.1f; int w = texture->Width(); int h = texture->Height(); float tu = (float)source.right/(w); float tv = (float)source.bottom/(h); float hu = (float)source.left/(w); float hv = (float)source.top/(h); Vector2d t0 = Vector2d( hu+tu, hv); Vector2d t1 = Vector2d( hu+tu, hv+tv); Vector2d t2 = Vector2d( hu, hv+tv); Vector2d t3 = Vector2d( hu, hv+tv); Vector2d t4 = Vector2d( hu, hv); Vector2d t5 = Vector2d( hu+tu, hv); float ex=(dest.right/2)+(origin.x); float ey=(dest.bottom/2)+(origin.y); Vector4d v4Color = Vector4d(color.r,color.g,color.b,color.a); VertexPositionColorTexture vertices[] = { { Vector3d( dest.right-ex, -ey, z),v4Color, t0}, { Vector3d( dest.right-ex, dest.bottom-ey , z),v4Color, t1}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t2}, { Vector3d( -ex, dest.bottom-ey , z),v4Color, t3}, { Vector3d( -ex, -ey , z),v4Color, t4}, { Vector3d( dest.right-ex, -ey , z),v4Color, t5}, }; auto mp_context = mp_D3D->mp_Context; // Lock the vertex buffer so it can be written to. mp_context->Map(mp_vertexBuffer, 0, D3D11_MAP_WRITE_DISCARD, 0, &mappedResource); // Get a pointer to the data in the vertex buffer. verticesPtr = (VertexPositionColorTexture*)mappedResource.pData; // Copy the data into the vertex buffer. memcpy(verticesPtr, (void*)vertices, (sizeof(VertexPositionColorTexture) * 6)); // Unlock the vertex buffer. mp_context->Unmap(mp_vertexBuffer, 0); //set vertex shader mp_context->IASetVertexBuffers( 0, 1, &mp_vertexBuffer, &TriangleVertexStride, &offset); //set texture mp_context->PSSetShaderResources( 0, 1, &texture->mp_SRV); //set matrix to shader mp_context->UpdateSubresource(mp_matrixBuffer, 0, 0, &spriteMatrix, 0, 0 ); mp_context->VSSetConstantBuffers( 0, 1, &mp_matrixBuffer); //draw sprite mp_context->Draw( 6, 0 ); }

  Read the article

• Verizon Wireless Supports its Mission-Critical Employee Portal with MySQL

  - by Bertrand Matthelié

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Verizon Wireless, the #1 mobile carrier in the United States, operates the nation’s largest 3G and 4G LTE network, with the most subscribers (109 millions) and the highest revenue ($70.2 Billion in 2011). Verizon Wireless built the first wide-area wireless broadband network and delivered the first wireless consumer 3G multimedia service in the US, and offers global voice and data services in more than 200 destinations around the world. To support 4.2 million daily wireless transactions and 493,000 calls and emails transactions produced by 94.2 million retail customers, Verizon Wireless employs over 78,000 employees with area headquarters across the United States. The Business Challenge Seeing the stupendous rise in social media, video streaming, live broadcasting…etc which redefined the scope of technology, Verizon Wireless, as a technology savvy company, wanted to provide a platform to its employees where they could network socially, view and host microsites, stream live videos, blog and provide the latest news. The IT team at Verizon Wireless had abundant experience with various technology platforms to support the huge number of applications in the company. However, open-source products weren’t yet widely used in the organization and the team had the ambition to adopt such technologies and see if the architecture could meet Verizon Wireless’ rigid requirements. After evaluating a few solutions, the IT team decided to use the LAMP stack for Vzweb, its mission-critical, 24x7 employee portal, with Drupal as the front end and MySQL on Linux as the backend, and for a few other internal websites also on MySQL. The MySQL Solution Verizon Wireless started to support its employee portal, Vzweb, its online streaming website, Vztube, and internal wiki pages, Vzwiki, with MySQL 5.1 in 2010. Vzweb is the main internal communication channel for Verizon Wireless, while Vztube hosts important company-wide webcasts regularly for executive-level announcements, so both channels have to be live and accessible all the time for its 78,000 employees across the United States. However during the initial deployment of the MySQL based Intranet, the application experienced performance issues. High connection spikes occurred causing slow user response time, and the IT team applied workarounds to continue the service. A number of key performance indexes (KPI) for the infrastructure were identified and the operational framework redesigned to support a more robust website and conform to the 99.985% uptime SLA (Service-Level Agreement). The MySQL DBA team made a series of upgrades in MySQL: Step 1: Moved from MyISAM to InnoDB storage engine in 2010 Step 2: Upgraded to the latest MySQL 5.1.54 release in 2010 Step 3: Upgraded from MySQL 5.1 to the latest GA release MySQL 5.5 in 2011, and leveraging MySQL Thread Pool as part of MySQL Enterprise Edition to scale better After making those changes, the team saw a much better response time during high concurrency use cases, and achieved an amazing performance improvement of 1400%! In January 2011, Verizon CEO, Ivan Seidenberg, announced the iPhone launch during the opening keynote at Consumer Electronic Show (CES) in Las Vegas, and that presentation was streamed live to its 78,000 employees. The event was broadcasted flawlessly with MySQL as the database. Later in 2011, Hurricane Irene attacked the East Coast of United States and caused major life and financial damages. During the hurricane, the team directed more traffic to its west coast data center to avoid potential infrastructure damage in the East Coast. Such transition was executed smoothly and even though the geographical distance became longer for the East Coast users, there was no impact in the performance of Vzweb and Vztube, and the SLA goal was achieved. “MySQL is the key component of Verizon Wireless’ mission-critical employee portal application,” said Shivinder Singh, senior DBA at Verizon Wireless. “We achieved 1400% performance improvement by moving from the MyISAM storage engine to InnoDB, upgrading to the latest GA release MySQL 5.5, and using the MySQL Thread Pool to support high concurrent user connections. MySQL has become part of our IT infrastructure, on which potentially more future applications will be built.” To learn more about MySQL Enterprise Edition, Get our Product Guide.

  Read the article

• Not so long ago in a city not so far away by Carlos Martin

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is the story of how the EMEA Presales Center turned an Oracle intern into a trusted technology advisor for both Oracle’s Sales and customers. It was the summer of 2011 when I was finishing my Computer Engineering studies as well as my internship at Oracle when I was offered what could possibly be THE dream job for any young European Computer Engineer. Apart from that, it also seemed like the role was particularly tailored to me as I could leverage almost everything I learned at University and during the internship. And all of it in one of the best cities to live in, not only from my home country but arguably from Europe: Malaga! A day at EPC As part of the EPC Technology pillar, and later on completely focused on WebCenter, there was no way to describe a normal day on the job as each day had something unique. Some days I was researching documentation in order to elaborate accurate answers for a customer’s question within a Request for Information or Proposal (RFI/RFP), other days I was doing heavy programming in order to bring a Proof of Concept (PoC) for a customer to life and last not but least, some days I presented to the customer via webconference the demo I built for them the past weeks. So as you can see, the role has research, development and presentation, could you ask for more? Well, don’t worry because there IS more! Internationality As the organization’s name suggests, EMEA Presales Center, it is the Center of Presales within Europe, Middle East and Africa so I got the chance to work with great professionals from all this regions, expanding my network and learning things from one country to apply them to others. In addition to that, the teams based in the Malaga office are comprised of many young professionals hailing mainly from Western and Central European countries (although there are a couple of exceptions!) with very different backgrounds and personalities which guaranteed many laughs and stories during lunch or coffee breaks (or even while working on projects!). Furthermore, having EPC offices in Bucharest and Bangalore and thanks to today’s tele-presence technologies, I was working every day with people from India or Romania as if they were sitting right next to me and the bonding with them got stronger day by day. Career development Apart from the research and self-study I’ve earlier mentioned, one of the EPC’s Key Performance Indicators (KPI) is that 15% of your time is spent on training so you get lots and lots of trainings in order to develop both your technical product knowledge and your presentation, negotiation and other soft skills. Sometimes the training is via webcast, sometimes the trainer comes to the office and sometimes, the best times, you get to travel abroad in order to attend a training, which also helps you to further develop your network by meeting face to face with many people you only know from some email or instant messaging interaction. And as the months go by, your skills improving at a very fast pace, your relevance increasing with each new project you successfully deliver, it’s only a matter of time (and a bit of self-promoting!) that you get the attention of the manager of a more senior team and are offered the opportunity to take a new step in your professional career. For me it took 2 years to move to my current position, Technology Sales Consultant at the Oracle Direct organization. During those 2 years I had built a good relationship with the Oracle Direct Spanish sales and sales managers, who are also based in the Malaga office. I supported their former Sales Consultant in a couple of presentations and demos and were very happy with my overall performance and attitude so even before the position got eventually vacant, I got a heads-up from then in advance that their current Sales Consultant was going to move to a different position. To me it felt like a natural step, same as when I joined EPC, I had at least a 50% of the “homework” already done but wanted to experience that extra 50% to add new product and soft skills to my arsenal. The rest is history, I’ve been in the role for more than half a year as I’m writing this, achieved already some important wins, gained a lot of trust and confidence in front of customers and broadened my view of Oracle’s Fusion Middleware portfolio. I look back at the 2 years I spent in EPC and think: “boy, I’d recommend that experience to absolutely anyone with the slightest interest in IT, there are so many different things you can do as there are different kind of roles you can end up taking thanks to the experience gained at EPC” /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Lync Server 2010

  - by ManojDhobale

  Microsoft Lync Server 2010 communications software and its client software, such as Microsoft Lync 2010, enable your users to connect in new ways and to stay connected, regardless of their physical location. Lync 2010 and Lync Server 2010 bring together the different ways that people communicate in a single client interface, are deployed as a unified platform, and are administered through a single management infrastructure. Workload Description IM and presence Instant messaging (IM) and presence help your users find and communicate with one another efficiently and effectively. IM provides an instant messaging platform with conversation history, and supports public IM connectivity with users of public IM networks such as MSN/Windows Live, Yahoo!, and AOL. Presence establishes and displays a user’s personal availability and willingness to communicate through the use of common states such as Available or Busy. This rich presence information enables other users to immediately make effective communication choices. Conferencing Lync Server includes support for IM conferencing, audio conferencing, web conferencing, video conferencing, and application sharing, for both scheduled and impromptu meetings. All these meeting types are supported with a single client. Lync Server also supports dial-in conferencing so that users of public switched telephone network (PSTN) phones can participate in the audio portion of conferences. Conferences can seamlessly change and grow in real time. For example, a single conference can start as just instant messages between a few users, and escalate to an audio conference with desktop sharing and a larger audience instantly, easily, and without interrupting the conversation flow. Enterprise Voice Enterprise Voice is the Voice over Internet Protocol (VoIP) offering in Lync Server 2010. It delivers a voice option to enhance or replace traditional private branch exchange (PBX) systems. In addition to the complete telephony capabilities of an IP PBX, Enterprise Voice is integrated with rich presence, IM, collaboration, and meetings. Features such as call answer, hold, resume, transfer, forward and divert are supported directly, while personalized speed dialing keys are replaced by Contacts lists, and automatic intercom is replaced with IM. Enterprise Voice supports high availability through call admission control (CAC), branch office survivability, and extended options for data resiliency. Support for remote users You can provide full Lync Server functionality for users who are currently outside your organization’s firewalls by deploying servers called Edge Servers to provide a connection for these remote users. These remote users can connect to conferences by using a personal computer with Lync 2010 installed, the phone, or a web interface. Deploying Edge Servers also enables you to federate with partner or vendor organizations. A federated relationship enables your users to put federated users on their Contacts lists, exchange presence information and instant messages with these users, and invite them to audio calls, video calls, and conferences. Integration with other products Lync Server integrates with several other products to provide additional benefits to your users and administrators. Meeting tools are integrated into Outlook 2010 to enable organizers to schedule a meeting or start an impromptu conference with a single click and make it just as easy for attendees to join. Presence information is integrated into Outlook 2010 and SharePoint 2010. Exchange Unified Messaging (UM) provides several integration features. Users can see if they have new voice mail within Lync 2010. They can click a play button in the Outlook message to hear the audio voice mail, or view a transcription of the voice mail in the notification message. Simple deployment To help you plan and deploy your servers and clients, Lync Server provides the Microsoft Lync Server 2010, Planning Tool and the Topology Builder. Lync Server 2010, Planning Tool is a wizard that interactively asks you a series of questions about your organization, the Lync Server features you want to enable, and your capacity planning needs. Then, it creates a recommended deployment topology based on your answers, and produces several forms of output to aid your planning and installation. Topology Builder is an installation component of Lync Server 2010. You use Topology Builder to create, adjust and publish your planned topology. It also validates your topology before you begin server installations. When you install Lync Server on individual servers, the installation program deploys the server as directed in the topology. Simple management After you deploy Lync Server, it offers the following powerful and streamlined management tools: Active Directory for its user information, which eliminates the need for separate user and policy databases. Microsoft Lync Server 2010 Control Panel, a new web-based graphical user interface for administrators. With this web-based UI, Lync Server administrators can manage their systems from anywhere on the corporate network, without needing specialized management software installed on their computers. Lync Server Management Shell command-line management tool, which is based on the Windows PowerShell command-line interface. It provides a rich command set for administration of all aspects of the product, and enables Lync Server administrators to automate repetitive tasks using a familiar tool. While the IM and presence features are automatically installed in every Lync Server deployment, you can choose whether to deploy conferencing, Enterprise Voice, and remote user access, to tailor your deployment to your organization’s needs.

  Read the article

• SQL SERVER – SSMS: Top Object and Batch Execution Statistics Reports

  - by Pinal Dave

  The month of June till mid of July has been the fever of sports. First, it was Wimbledon Tennis and then the Soccer fever was all over. There is a huge number of fan followers and it is great to see the level at which people sometimes worship these sports. Being an Indian, I cannot forget to mention the India tour of England later part of July. Following these sports and as the events unfold to the finals, there are a number of ways the statisticians can slice and dice the numbers. Cue from soccer I can surely say there is a team performance against another team and then there is individual member fairs against a particular opponent. Such statistics give us a fair idea to how a team in the past or in the recent past has fared against each other, head-to-head stats during World cup and during other neutral venue games. All these statistics are just pointers. In reality, they don’t reflect the calibre of the current team because the individuals who performed in each of these games are totally different (Typical example being the Brazil Vs Germany semi-final match in FIFA 2014). So at times these numbers are misleading. It is worth investigating and get the next level information. Similar to these statistics, SQL Server Management studio is also equipped with a number of reports like a) Object Execution Statistics report and b) Batch Execution Statistics reports. As discussed in the example, the team scorecard is like the Batch Execution statistics and individual stats is like Object Level statistics. The analogy can be taken only this far, trust me there is no correlation between SQL Server functioning and playing sports – It is like I think about diet all the time except while I am eating. Performance – Batch Execution Statistics Let us view the first report which can be invoked from Server Node -> Reports -> Standard Reports -> Performance – Batch Execution Statistics. Most of the values that are displayed in this report come from the DMVs sys.dm_exec_query_stats and sys.dm_exec_sql_text(sql_handle). This report contains 3 distinctive sections as outline below.   Section 1: This is a graphical bar graph representation of Average CPU Time, Average Logical reads and Average Logical Writes for individual batches. The Batch numbers are indicative and the details of individual batch is available in section 3 (detailed below). Section 2: This represents a Pie chart of all the batches by Total CPU Time (%) and Total Logical IO (%) by batches. This graphical representation tells us which batch consumed the highest CPU and IO since the server started, provided plan is available in the cache. Section 3: This is the section where we can find the SQL statements associated with each of the batch Numbers. This also gives us the details of Average CPU / Average Logical Reads and Average Logical Writes in the system for the given batch with object details. Expanding the rows, I will also get the # Executions and # Plans Generated for each of the queries. Performance – Object Execution Statistics The second report worth a look is Object Execution statistics. This is a similar report as the previous but turned on its head by SQL Server Objects. The report has 3 areas to look as above. Section 1 gives the Average CPU, Average IO bar charts for specific objects. The section 2 is a graphical representation of Total CPU by objects and Total Logical IO by objects. The final section details the various objects in detail with the Avg. CPU, IO and other details which are self-explanatory. At a high-level both the reports are based on queries on two DMVs (sys.dm_exec_query_stats and sys.dm_exec_sql_text) and it builds values based on calculations using columns in them: SELECT * FROM    sys.dm_exec_query_stats s1 CROSS APPLY sys.dm_exec_sql_text(sql_handle) AS s2 WHERE   s2.objectid IS NOT NULL AND DB_NAME(s2.dbid) IS NOT NULL ORDER BY  s1.sql_handle; This is one of the simplest form of reports and in future blogs we will look at more complex reports. I truly hope that these reports can give DBAs and developers a hint about what is the possible performance tuning area. As a closing point I must emphasize that all above reports pick up data from the plan cache. If a particular query has consumed a lot of resources earlier, but plan is not available in the cache, none of the above reports would show that bad query. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

  Read the article

• Weekend With #iPad

  - by andrewbrust

  Saturday morning, I got up, got dressed and took a 7-minute walk up to the Apple Store in New York’s Meatpacking District to pick up my reserved iPad.  This precinct, which borders Greenwich Village (where I live and grew up) was, when I was a kid, a very industrial and smelly neighborhood during the day  and a rough neighborhood at night.  So imagine my sense of irony as I walked up Hudson Street towards 14th Street, to go wait in line with a bunch of hipsters to buy an iPad on launch day. Numerous blue T-shirt-clad Apple store workers were on hand to check people in to the line specifically identified for people who had reserved an iPad.  Others workers passed out water and all of them, I kid you not, applauded people as they got their chance to go into the store and buy their devices.  They also cheered people and yelled “congratulations” as they left.  The event had all the charm of a mass wedding officiated by Reverend Sung Myung Moon.  Once inside, a nice dude named Trey, with lots of tattoos on his calves, helped me and I acquired my device in short order.  Another guy helped me activate the device, which was comical, because that has to be done through iTunes, which I hadn’t logged into in a while. Turns out my user id was my email address from the company I sold 5 1/2 years ago.  Who knew?  Regardless, I go the device working, packed up and left the store, shuddering as I was cheered and congratulated.  By this time (about 10:30am) the line for reserved units and even walk-ins, was gone.  The iPhone launch this was not. As much as I detested the Apple Store experience, I must say the device is really nice.  the screen is bright, the colors are bold, and the experience is ultra-smooth.  I quickly tested Safari, YouTube, Google Maps, and then installed a few apps, including the New York Times Editors’ Choice and a couple of Twitter clients. Some initial raves: Google Maps and Street View on the iPad is just amazing.  The screen is full-size like a PC or Mac, but it’s right in front of you and responding to taps and flicks and pinches and it’s really engulfing.  Video and photos are really nice on this device, despite the fact that 16:9 and anamorphic aspect ration content is letter boxed.  It still looks amazing.  And apps that are designed especially for the iPad, including The Weather Channel and Gilt and Kayak just look stunning.  The richness, the friendly layout, the finger-friendly UIs, and the satisfaction of not having a keyboard between you and the information you’re managing, while you sit on a couch or an easy chair, is just really a beautiful thing.  The mere experience of seeing these apps’ splash screens causes a shiver and Goosebumps.  Truly.  The iPad is not a desktop machine, and it’s not pocket device.  That doesn’t mean it’s useless though.  It’s the perfect “couchtop” computer. Now some downsides: the WiFi radio seems a bit flakey.  More than a few times, I have had to toggle the WiFi off and back on to get it to connect properly.  Worse yet, the iPad is totally bamboozled by the fact that I have four WiFi access points in my house, each with the same SSID.  My laptops are smart enough to roam from one to the other, but the iPad seems to maintain an affinity for the downstairs access point, even if I’m turning it on two flights up.  Telling the iPad to “forget” my WiFi network and then re-associate with it doesn’t help. More downers: as you might expect, there are far more applications developed for the iPhone than the iPad.  And although iPhone apps run on the iPad, that provides about the same experience as watching standard def on a big HD flat panel, complete with the lousy choice of thick black borders or zooming the picture in to fill the screen.  And speaking of iPhone Apps, I can’t get the Sonos one to work.  Ideally, they’d have a dedicated iPad app and it would work on the first try.  And the iPad is just as bad as any netbook when it comes to being a magnet for fingerprints.  The lack of multi-tasking is quite painful too – truly, I don’t mind if only one app can be active at once, but the lack of ability to switch between apps, and the requirement to return to the home screen and re-launch a previous app to switch back, is already old and I’ve had the thing less than 48 hours. These are just initial impressions.  I’ll have a fuller analysis soon, after I’ve had some more break-in time with my new toy.  I’ll be thinking not just about the iPad and iPhone but also about Android, the 2.1 update for which was pushed to my Droid today, and Windows Phone 7, whose “hub” concept I now understand the value of.  This has been a great year for alternative computing devices, and I see no net downside for Apple, Google or Microsoft.  Exciting times.

  Read the article

• How big can my SharePoint 2010 installation be?

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). 3 years ago, I had published “How big can my SharePoint 2007 installation be?” Well, SharePoint 2010 has significant under the covers improvements. So, how big can your SharePoint 2010 installation be? There are three kinds of limits you should know about Hard limits that cannot be exceeded by design. Configurable that are, well configurable – but the default values are set for a pretty good reason, so if you need to tweak, plan and understand before you tweak. Soft limits, you can exceed them, but it is not recommended that you do. Before you read any of the limits, read these two important disclaimers - 1. The limit depends on what you’re doing. So, don’t take the below as gospel, the reality depends on your situation. 2. There are many additional considerations in planning your SharePoint solution scalability and performance, besides just the below. So with those in mind, here goes.   Hard Limits - Zones per web app 5 RBS NAS performance Time to first byte of any response from NAS must be less than 20 milliseconds List row size 8000 bytes driven by how SP stores list items internally Max file size 2GB (default is 50MB, configurable). RBS does not increase this limit. Search metadata properties 10,000 per item crawled (pretty damn high, you’ll never need to worry about it). Max # of concurrent in-memory enterprise content types 5000 per web server, per tenant Max # of external system connections 500 per web server PerformancePoint services using Excel services as a datasource No single query can fetch more than 1 million excel cells Office Web Apps Renders One doc per second, per CPU core, per Application server, limited to a maximum of 8 cores.   Configurable Limits - Row Size Limit 6, configurable via SPWebApplication.MaxListItemRowStorage property List view lookup 8 join operations per query Max number of list items that a single operation can process at one time in normal hours 5000 Configurable via SPWebApplication.MaxItemsPerThrottledOperation   Also you get a warning at 3000, which is configurable via SPWebApplication.MaxItemsPerThrottledOperationWarningLevel   In addition, throttle overrides can be requested, throttle overrides can be disabled, and time windows can be set when throttle is disabled. Max number of list items for administrators that a single operation can process at one time in normal hours 20000 Configurable via SPWebApplication.MaxItemsPerThrottledOperationOverride Enumerating subsites 2000 Word and Powerpoint co-authoring simultaneous editors 10 (Hard limit is 99). # of webparts on a page 25 Search Crawl DBs per search service app 10 Items per crawl db 25 million Search Keywords 200 per site collection. There is a max limit of 5000, which can then be modified by editing the web.config/client.config. Concurrent # of workflows on a content db 15. Workflows running in the timer service are not counted in this limit. Further workflows are queued. Can be configured via the Set-SPFarmConfig powershell commandlet. Number of events picked by the workflow timer job and delivered to workflows 100. You can increase this limit by running additional instances of the workflow timer service. Visio services file size 50MB Visio web drawing recalculation timeout 120 seconds Configurable via – Powershell commandlet Set-SPVisioPerformance Visio services minimum and maximum cache age for data connected diagrams 0 to 24 hours. Default is 60 minutes. Configurable via – Powershell commandlet Set-SPVisioPerformance   Soft Limits - Content Databases 300 per web app Application Pools 10 per web server Managed Paths 20 per web app Content Database Size 200GB per Content DB Size of 1 site collection 100GB # of sites in a site collection 250,000 Documents in a library 30 Million, with nesting. Depends heavily on type and usage and size of documents. Items 30 million. Depends heavily on usage of items. SPGroups one SPUser can be in 5000 Users in a site collection 2 million, depends on UI, nesting, containers and underlying user store AD Principals in a SPGroup 5000 SPGroups in a site collection 10000 Search Service Instances 20 Indexed Items in Search 100 million Crawl Log entries 100 million Search Alerts 1 million per search application Search Crawled Properties 1/2 million URL removals in search 100 removals per operation User Profiles 2 million per service application Social Tags 500 million per social database Comment on the article ....

  Read the article

• WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

  - by JuergenKress

  You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Oracle SQL Developer v3.2.1 Now Available

  - by thatjeffsmith

  Oracle SQL Developer version 3.2.1 is now available. I recommend that everyone now upgrade to this release. It features more than 200 bug fixes, tweaks, and polish applied to the 3.2 edition. The high profile bug fixes submitted by customers and users on our forums are listed in all their glory for your review. I want to highlight a few of the changes though, as I recognize many of you lack the time and/or patience to ‘read the docs.’ That would include me, which is why I enjoy writing these kinds of blog posts. I’m lazy – just like you! No more artificial line breaks between CREATE OR REPLACE and your PL/SQL In versions 3.2 and older, when you pull up your stored procedural objects in our editor, you would see a line break inserted between the CREATE OR REPLACE and then the body of your code. In version 3.2.1, we have removed the line break. 3.1 3.2.1 Trivia Did You Know? The database doesn’t store the ‘CREATE’ or ‘CREATE OR REPLACE’ bit of your PL/SQL code in the database. If we look at the USER_SOURCE view, we can see that the code begins with the object name. So the CREATE OR REPLACE bit is ‘artificial’ The intent is to give you the code necessary to recreate your object – and have it ‘compile’ into the database. We pretty much HAVE to add the ‘CREATE OR REPLACE.’ From now on it will appear inline with the first line of your code. Exporting Tables & Views When exporting data from your tables or views, previous versions of SQL Developer presented a 3 step wizard. It allows you to choose your columns and apply data filters for what is exported. This was kind of redundant. The grids already allowed you to select your columns and apply filters. Wouldn’t it be more intuitive AND efficient to just make the grids behave in a What You See Is What You Get (WYSIWYG) fashion? In version 3.2.1, that is exactly what will happen. The wizard now only has two steps and the grid will export the data and columns as defined in the visible grid. Let the grid properties define what is actually exported! And here is what is pasted into my worksheet: "BREWERY"|"CITY" "3 Brewers Restaurant Micro-Brewery"|"Toronto" "Amsterdam Brewing Co."|"Toronto" "Ball Brewing Company Ltd."|"Toronto" "Big Ram Brewing Company"|"Toronto" "Black Creek Historic Brewery"|"Toronto" "Black Oak Brewing"|"Toronto" "C'est What?"|"Toronto" "Cool Beer Brewing Company"|"Toronto" "Denison's Brewing"|"Toronto" "Duggan's Brewery"|"Toronto" "Feathers"|"Toronto" "Fermentations! - Danforth"|"Toronto" "Fermentations! - Mount Pleasant"|"Toronto" "Granite Brewery & Restaurant"|"Toronto" "Labatt's Breweries of Canada"|"Toronto" "Mill Street Brew Pub"|"Toronto" "Mill Street Brewery"|"Toronto" "Molson Breweries of Canada"|"Toronto" "Molson Brewery at Air Canada Centre"|"Toronto" "Pioneer Brewery Ltd."|"Toronto" "Post-Production Bistro"|"Toronto" "Rotterdam Brewing"|"Toronto" "Steam Whistle Brewing"|"Toronto" "Strand Brasserie"|"Toronto" "Upper Canada Brewing"|"Toronto" JUST what I wanted And One Last Thing Speaking of export, sometimes I want to send data to Excel. And sometimes I want to send multiple objects to Excel – to a single Excel file that is. In version 3.2.1 you can now do that. Let’s export the bulk of the HR schema to Excel, with each table going to it’s own workbook in the same worksheet. Select many tables, put them in in a single Excel worksheet If you try this in previous versions of SQL Developer it will just write the first table to the Excel file. This is one of the bugs we addressed in v3.2.1. Here is what the output Excel file looks like now: Many tables - Many workbooks in an Excel Worksheet I have a sneaky suspicion that this will be a frequently used feature going forward. Excel seems to be the cornerstone of many of our popular features. Imagine that!

  Read the article

• Passing the CAML thru the EY of the NEEDL

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Passing the CAML thru the EY of the NEEDL Definitions: CAML (Collaborative Application Markup Language) is an XML based markup language used in Microsoft SharePoint technologies  Anonymous: A camel is a horse designed by committee  Dov Trietsch: A CAML is a HORS designed by Microsoft  I was advised against putting any Camel and Sphinx rhymes in here. Look it up in Google!  _____ Now that we have dispensed with the dromedary jokes (BTW, I have many more, but they are not fit to print!), here is an interesting problem and its solution.  We have built a list where the title must be kept unique so I needed to verify the existence (or absence) of a list item with a particular title. Two methods came to mind:  1: Span the list until the title is found (result = found) or until the list ends (result = not found). This is an algorithm of complexity O(N) and for long lists it is a performance sucker. 2: Use a CAML query instead. Here, for short list we’ll encounter some overhead, but because the query results in an SQL query on the content database, it is of complexity O(LogN), which is significantly better and scales perfectly. Obviously I decided to go with the latter and this is where the CAML s--t hit the fan.   A CAML query returns a SPListItemCollection and I simply checked its Count. If it was 0, the item did not already exist and it was safe to add a new item with the given title. Otherwise I cancelled the operation and warned the user. The trouble was that I always got a positive. Most of the time a false positive. The count was greater than 0 regardles of the title I checked (except when the list was empty, which happens only once). This was very disturbing indeed. To solve my immediate problem which was speedy delivery, I reverted to the “Span the list” approach, but the problem bugged me, so I wrote a little console app by which I tested and tweaked and tested, time and again, until I found the solution. Yes, one can pass the proverbial CAML thru the ey of the needle (e’s missing on purpose).  So here are my conclusions:  CAML that does not work:  Note: QT is my quote:  char QT = Convert.ToChar((int)34); string titleQuery = "<Query>><Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where></Query>"; titleQuery += "<ViewFields><FieldRef Name=" + QT + "Title" + QT + "/></ViewFields>";  Why? Even though U2U generates it, the <Query> and </Query> tags do not belong in the query that you pass. Start your query with the <Where> clause.  Also the <ViewFiels> clause does not belong. I used this clause to limit the returned collection to a single column, and I still wish to do it. I’ll show how this is done a bit later.   When you use the <Query> </Query> tags in you query, it’s as if you did not specify the query at all. What you get is the all inclusive default query for the list. It returns evey column and every item. It is expensive for both server and network because it does all the extra processing and eats plenty of bandwidth.   Now, here is the CAML that works  string titleQuery = "<Where><Eq>"; titleQuery += "<FieldRef Name=" + QT + "Title" + QT + "/>"; titleQuery += "<Value Type=" + QT + "Text" + QT + ">" + uniqueID + "</Value></Eq></Where>";  You’ll also notice that inside the unusable <ViewFields> clause above, we have a <FieldRef> clause. This is what we pass to the SPQuery object. Here is how:  SPQuery query = new SPQuery(); query.Query = titleQuery; query.ViewFields = "<FieldRef Name=" + QT + "Title" + QT + "/>"; query.RowLimit = 1; SPListItemCollection col = masterList.GetItems(query);  Two thing to note: we enter the view fields into the SPQuery object and we also limited the number of rows that the query returns. The latter is not always done, but in an existence test, there is no point in returning hundreds of rows. The query will now return one item or none, which is all we need in order to verify the existence (or non-existence) of items. Limiting the number of columns and the number of rows is a great performance enhancer. That’s all folks!!

  Read the article

• Diagnosing ADF Mobile iOS deployment problems

  - by Chris Muir

  From time to time I encounter customers who have taken possession of a brand new Apple Mac, have that excited "I've just spent more on a computer then I ever wanted to but it's okay" crazy gleam in their eye, but on pre-loading all the necessary software for Oracle's ADF Mobile to start their mobile campaign, following Oracle's setup instructions and deploying their first app to Apple's XCode iPhone Simulator they hit this error message in the JDeveloper Log-Deployment window: [01:36:46 PM] Deployment cancelled. [01:36:46 PM] ----  Deployment incomplete  ----. [01:36:46 PM] Failed to build the iOS application bundle. [01:36:46 PM] Deployment failed due to one or more errors returned by '/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  The following is a summary of the returned error(s): Command-line execution failed (Return code: 69) "Oh, return code 69, I know that well" I hear you say.  Admittedly the error code is less than useful besides drawing some titters from the peanut gallery. Before explaining what's gone wrong, I think it's useful to teach customers how to diagnose these issues themselves.  When ADF Mobile commences a deployment, be it to Apple's iOS or Google's Android platforms, JDeveloper and ADF Mobile do a good job in the Log window of showing you what the deployment process entails.  In the case of deploying to iOS the log window will literally include the XCode commands executed to complete the deployment cycle. As example here's the log output that was produced before the error message was raised.... take the opportunity to read this line by line and note the command line calls highlighted in blue: (Note some of the following lines have been split over multiple lines to suit reading on this blog, each original line is preceded by a timestamp. Ensure to check the exact commands from JDev) [01:36:33 PM] Target platform is (iOS). [01:36:33 PM] Beginning deployment of ADF Mobile application 'LayoutDemo' to iOS using profile 'IOS_MOBILE_NATIVE_archive1'. [01:36:34 PM] Command-line executed: [/Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild, -version] [01:36:34 PM] Command-line execution succeeded. [01:36:34 PM] Running dependency analysis... [01:36:34 PM] Building... [01:36:34 PM] Deploying 3 profiles... [01:36:35 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ApplicationController/ deploy/ApplicationController.jar [01:36:35 PM] WARNING: No Resource Catalog enabled ADF components found to package [01:36:36 PM] Wrote Archive Module to /Users/chris/fmw/jdeveloper/jdev/extensions/ oracle.adf.mobile/Samples/PublicSamples/LayoutDemo/ViewController/ deploy/ViewController.jar [01:36:36 PM] Verifying existence of the .adf source directory of the ADF Mobile application... [01:36:36 PM] Verifying Application Controller project exists... [01:36:36 PM] Verifying application dependencies... [01:36:36 PM] The application may not function correctly because the following dependent libraries are missing: /Users/chris/jdev/jdeveloper/jdeveloper/jdev/extensions/oracle.adf.mobile/ lib/adfmf.springboard.jar [01:36:36 PM] Verifying project dependencies... [01:36:36 PM] Validating application XML files... [01:36:36 PM] Validating XML files in project ApplicationController... [01:36:36 PM] Validating XML files in project ViewController... [01:36:40 PM] Copying common javascript files... [01:36:41 PM] Copying FARs to the ADF Mobile Framework application... [01:36:41 PM] Extracting Feature Archive file, "ApplicationController.jar" to deployment folder, "ApplicationController". [01:36:42 PM] Extracting Feature Archive file, "ViewController.jar" to deployment folder, "ViewController". [01:36:42 PM] Deploying skinning files... [01:36:43 PM] Copying the CVM SDK files built for the x86 processor... [01:36:43 PM] Copying the CVM JDK files built for the x86 processor... [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/x86/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/ Samples/PublicSamples/ LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Command-line executed: [cp, -R, -p, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/ temporary_xcode_project/lib] [01:36:43 PM] Command-line execution succeeded. [01:36:43 PM] Copying security related files to the ADF Mobile Framework application... [01:36:44 PM] Command-line executed from path: /Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/temporary_xcode_project/ [01:36:44 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/ Developer/SDKs/iPhoneSimulator6.1.sdk DSTROOT=/Users/chris/fmw/jdeveloper/jdev/extensions/oracle.adf.mobile/Samples/ PublicSamples/LayoutDemo/deploy/IOS_MOBILE_NATIVE_archive1/Destination_Root/ IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=LayoutDemo ADD_SETTINGS_BUNDLE=NO As you can see when we move from JDeveloper undertaking its work, it then passes the code off in the last few lines for Apple's XCode to assemble and deploy the required .ipa file.  From the original error message which followed this complaining about xcodebuild failing with return code 69, we can quickly see the exact command line used to call xcodebuild. As this is the exact command line call with all its options, you're free to open a Terminal window in Mac OSX and execute the same command by simply copying and pasting the command line. And via this you'll then find out what return code actually 69 means.  Unfortunately it's not that exciting. For Macs that have just been installed and configured with XCode, XCode (and for that matter iTunes) which is required by ADF Mobile to deploy must have been run at least once before hand on your brand new Mac (to be clear that's once ever, not once every restart). On doing so you will be presented with a license agreement from Apple that you must accept. Only once you've done this will the command line calls work.  They're currently failing as you haven't accepted the legal terms and conditions. (arguably you an also accept the terms and conditions from the command line too, but ADF Mobile cannot do this on your behalf, so it's just easier to open the tools and confirm the legal requirements that way). Putting aside the error code and its meaning, watching the log window, watching what commands are executed, learning what they do, this will assist you to diagnose issues yourself and solve these sort of issues more relatively quickly.  From my perspective as an Oracle Product Manager, it allows me to say "this is the stuff you don't need to worry about when you use ADF Mobile when it's configured correctly" .... as you can see my salesman qualities shine through. For anyone who is happily using ADF Mobile on a Mac and wondering why you didn't hit these issues, it's quite likely that you already accepted the license conditions before deploying via ADF Mobile.  For instance, though I'm not a fan of iTunes itself, iTunes was one of the first things I loaded on my Mac to access my Justin Bieber albums. Image courtesy of winnond / FreeDigitalPhotos.net

  Read the article

• Oracle Database 12c Spatial: Vector Performance Acceleration

  - by Okcan Yasin Saygili-Oracle

  Most business information has a location component, such as customer addresses, sales territories and physical assets. Businesses can take advantage of their geographic information by incorporating location analysis and intelligence into their information systems. This allows organizations to make better decisions, respond to customers more effectively, and reduce operational costs – increasing ROI and creating competitive advantage. Oracle Database, the industry’s most advanced database,  includes native location capabilities, fully integrated in the kernel, for fast, scalable, reliable and secure spatial and massive graph applications. It is a foundation for deploying enterprise-wide spatial information systems and locationenabled business applications. Developers can extend existing Oracle-based tools and applications, since they can easily incorporate location information directly in their applications, workflows, and services. Spatial Features The geospatial data features of Oracle Spatial and Graph option support complex geographic information systems (GIS) applications, enterprise applications and location services applications. Oracle Spatial and Graph option extends the spatial query and analysis features included in every edition of Oracle Database with the Oracle Locator feature, and provides a robust foundation for applications that require advanced spatial analysis and processing in the Oracle Database. It supports all major spatial data types and models, addressing challenging business-critical requirements from various industries, including transportation, utilities, energy, public sector, defense and commercial location intelligence. Network Data Model Graph Features The Network Data Model graph explicitly stores and maintains a persistent data model withnetwork connectivity and provides network analysis capability such as shortest path, nearest neighbors, within cost and reachability. It loads partitioned networks into memory on demand, overcomingthe limitations of in-memory analysis. Partitioning massive networks into manageable sub-networkssimplifies the network analysis. RDF Semantic Graph Features RDF Semantic Graph has native support for World Wide Web Consortium standards. It has open, scalable, and secure features for storing RDF/OWL ontologies anddata; native inference with OWL 2, SKOS and user-defined rules; and querying RDF/OWL data withSPARQL 1.1, Java APIs, and SPARQLgraph patterns in SQL. Video: Oracle Spatial and Graph Overview Oracle spatial is embeded on oracle database product. So ,we can use oracle installer (OUI).The Oracle Universal Installer (OUI) is used to install Oracle Database software. OUI is a graphical user interface utility that enables you to view the Oracle software that is installed on your machine, install new Oracle Database software, and delete Oracle software that you no longer need to use. Online Help is available to guide you through the installation process. One of the installation options is to create a database. If you select database creation, OUI automatically starts Oracle Database Configuration Assistant (DBCA) to guide you through the process of creating and configuring a database. If you do not create a database during installation, you must invoke DBCA after you have installed the software to create a database. You can also use DBCA to create additional databases. For installing Oracle Database 12c you may check the Installing Oracle Database Software and Creating a Database tutorial under the Oracle Database 12c 2-Day DBA Series.You can always check if spatial is available in your database using  "select comp_id, version, status, comp_name from dba_registry where comp_id='SDO';"   One of the most notable improvements with Oracle Spatial and Graph 12c can be seen in performance increases in vector data operations. Enabling the Spatial Vector Acceleration feature (available with the Spatial option) dramatically improves the performance of commonly used vector data operations, such as sdo_distance, sdo_aggr_union, and sdo_inside. With 12c, these operations also run more efficiently in parallel than in prior versions through the use of metadata caching. For organizations that have been facing processing limitations, these enhancements enable developers to make a small set of configuration changes and quickly realize significant performance improvements. Results include improved index performance, enhanced geometry engine performance, optimized secondary filter optimizations for Spatial operators, and improved CPU and memory utilization for many advanced vector functions. Vector performance acceleration is especially beneficial when using Oracle Exadata Database Machine and other large-scale systems. Oracle Spatial and Graph vector performance acceleration builds on general improvements available to all SDO_GEOMETRY operations in these areas: Caching of index metadata, Concurrent update mechanisms, and Optimized spatial predicate selectivity and cost functions. These optimizations enable more efficient use of: CPU, Memory, and Partitioning Resulting in substantial query performance improvements.UsageTo accelerate the performance of spatial operators, it is recommended that you set the SPATIAL_VECTOR_ACCELERATION database system parameter to the value TRUE. (This parameter is authorized for use only by licensed Oracle Spatial users, and its default value is FALSE.) You can set this parameter for the whole system or for a single session. To set the value for the whole system, do either of the following:Enter the following statement from a suitably privileged account:   ALTER SYSTEM SET SPATIAL_VECTOR_ACCELERATION = TRUE;Add the following to the database initialization file (xxxinit.ora):   SPATIAL_VECTOR_ACCELERATION = TRUE;To set the value for the current session, enter the following statement from a suitably privileged account:   ALTER SESSION SET SPATIAL_VECTOR_ACCELERATION = TRUE; Checkout the complete list of new features on Oracle.com @ http://www.oracle.com/technetwork/database/options/spatialandgraph/overview/index.html Spatial and Graph Data Sheet (PDF) Spatial and Graph White Paper (PDF)

  Read the article

• Fusion HCM SaaS – Integration

  - by Kiran Mundy

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Fusion HCM SaaS – Integration A typical implementation pattern we’re seeing with Fusion Apps early adopters is implementing a few Fusion HCM applications that bring the most benefit to their company with the least disruption to existing programs and interfaces. Very often this ends up being Fusion Goals & Performance, Talent, Compensation or Benefits, often with Taleo for recruiting. The implementation picture looks like what you see below: Here, you can see that all the “downstream integrations” from the On-Premise Core HR, are unaffected because the master for employee data is still your On-Premise Core HR system – all updates and new hires are made here (although they may be fed in from Taleo to start with). As a second phase when customers migrate Core HR to Fusion HCM, they have to come up with a strategy to manage integrations to all their downstream applications that require employee details. For customers coming from EBS HR, a short term strategy that allows for minimal impact, is to extract employee data from Fusion (Via HCM Extract), and load the shared EBS HR tables (which are part of an EBS Financials install anyways), and let your downstream integrations continue to function based on this data as shown below. If you are not coming from EBS HR and there are license implications, you may want to consider: Creating an On-Premise warehouse for extracting data from Fusion Apps. Leveraging Fusion Apps Web Services (available to SaaS customers starting R7) to directly retrieve/write data to Fusion Apps. Integration Tools File Based Loader This is the primary mechanism for loading HCM data (both initial load and incremental updates) into Fusion HCM. Employee & related data can be uploaded into Fusion HCM using File Based Loader. Note that ability to schedule File Based Loader to run on a pre-defined schedule will be available as a patch on top of Rel 5. Hr2Hr has been deprecated in favor of File Based Loader, but for existing customers using Hr2Hr, here are some sample scripts that show how to get more informative error messages. They can be run by creating data model sql queries in BI Publisher. The scripts currently have hard coded values for request id and loader batch id, which your developer will need to update to the correct values for you. The BI Publisher Training Session recorded on Apr 18th is available here (under "Recordings"). This will enable a somewhat technical resource to create a data model sql query. Links to Documentation & Traning Reference documentation for File Based Loader on docs.oracle.com FBL 1.1 MOS Doc Id 1533860.1 Sample demo data files for File Based Loader HCM SaaS Integrations ppt and recording. EBS api's Loading Information into EBS Full or Shared HCM This could be candidate information being loaded from Taleo into EBS or  Employee information being loaded from Fusion HCM into an EBS shared HR install (for downstream applications & EBS Financials). Oracle HRMS Product Family Publicly Callable Business Process APIs (A Reference Consolidation) [ID 216838.1] This is a guide to the EBS R12 Integration Repository accessible from an EBS instance. EBS HRMS Publicly Callable Business Process APIs in Release 11i & 12 [ID 121964.1] Fusion HCM Extract Fusion HCM Extract is the primary mechanism used to extract employee information from Fusion HCM. Refer to the "Configure Identity Sync" doc on MOS  for additional mechanisms. Additional documentation (you'll need an oracle.com account to access) HCM Extracts User Guides (Rel 4 & 5) HCM Extract Entity/Attributes (Rel 5) HCM Extract User Guide (Rel 5) If you don’t have an oracle.com account, download the zipped HCM Extract Rel 5 Docs (Click on File --> Download on next screen). View Training Recordings on Fusion HCM Extract Benefits Extract To setup the benefits extract, refer to the following guide. Page 2-15 of the User Documentation describes how to use the benefits extract. Benefit enrollments can also be uploaded into Fusion Benefits. Instructions are here along with a sample upload file. However, if the defined benefits extract does not meet your requirements, you can use BI Publisher (Link to BI Publisher presentation recording from Apr 18th) to create your own version of Benefits extract. You can start with the data model query underlying the benefits extract. Payroll Interface Fusion Payroll Interface enables you to capture personal payroll information, such as earnings and deductions, along with other data from Oracle Fusion Human Capital Management, and send that information to a third-party payroll provider. Documentation: Payroll interface guide Sample file DBI's used for the payroll interface.Usage Patterns always accessible @ http://www.finapps.com Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• Convert a PDF eBook to ePub Format

  - by Matthew Guay

  Would you like to read a PDF eBook on an eReader or mobile device, but aren’t happy with the performance? Here’s how you can convert your PDFs to the popular ePub format so you can easily read them on any device. PDFs are a popular format for eBooks since they render the same on any device and can preserve the exact layout of the print book.  However, this benefit is their major disadvantage on mobile devices, as you often have to zoom and pan back and forth to see everything on the page.  ePub files, on the other hand, are an increasingly popular option. They can reflow to fill your screen instead of sticking to a strict layout style.  With the free Calibre program, you can quickly convert your PDF eBooks to ePub format. Getting Started Download the Calibre installer (link below) for your operating system, and install as normal.  Calibre works on recent versions of Windows, OS X, and Linux.  The Calibre installer is very streamlined, so the install process was quite quick. Calibre is a great application for organizing your eBooks.  It can automatically sort your books by their metadata, and even display their covers in a Coverflow-style viewer. To add an eBook to your library, simply drag-and-drop the file into the Calibre window, or click Add books at the top.  Here you can choose to add all the books from a folder and more. Calibre will then add the book(s) to your library, import the associated metadata, and organize them in the catalog. Convert your Books Once you’ve imported your books into Calibre, it’s time to convert them to the format you want.  Select the book or books you want to convert, and click Convert E-books.  Select whether you want to convert them individually or bulk convert them. The convertor window has lots of options, so you can get your ePub book exactly like you want.  You can simply click Ok and go with the defaults, or you can tweak the settings. Do note that the conversion will only work successfully with PDFs that contain actual text.  Some PDFs are actually images scanned in from the original books; these will appear just like the PDF after the conversion, and won’t be any easier to read. On the first tab, you’ll notice that Calibri will repopulate most of the metadata fields with info from your PDF.  It will also use the first page of the PDF as the cover.  Edit any of the information that may be incorrect, and add any additional information you want associated with the book. If you want to convert your eBook to a different format other than ePub, Calibri’s got you covered, too.  On the top right, you can choose to output the converted eBook into a many different file formats, including the Kindle-friendly MOBI format. One other important settings page is the Structure Detection tab.  Here you can choose to have it remove headers and footers in the converted book, as well as automatically detect chapter breaks. Click Ok when you’ve finished choosing your settings and Calibre will convert the book.  This may take a few minutes, depending on the size of the PDF.  If the conversion seems to be taking too long, you can click Show job details for more information on the progress.   The conversion usually works good, but we did have one job freeze on us.  When we checked the job details, it indicated that the PDF was copy-protected.  Most PDF eBooks, however, worked fine. Now, back in the main Calibri window, select your book and save it to disk.  You can choose to save only the EPUB format, or you can select Save to disk to save all formats of the book to your computer. You can also view the ePub file directly in Calibri’s built-in eBook viewer.  This is the PDF book we converted, and it looks fairly good in the converted format.  It does have some odd line breaks and some misplaced numbers, but on the whole, the converted book is much easier to read, especially on small mobile devices.   Even images get included inline, so you shouldn’t be missing anything from the original eBook. Conclusion Calibri makes it simple to read your eBooks in any format you need. It is a project that is in constant development, and updates regularly adding better stability and features.  Whether you want to ready your PDF eBooks on a Sony Reader, Kindle, netbook or Smartphone, your books will now be more accessible than ever.  And with thousands of free PDF eBooks out there, you’ll be sure to always have something to read. If you’d like some Geeky PDF eBooks, Microsoft Press is offering a number of free PDF eBooks right now.  Check them out at this link (Account Required). Download the Calibre eBook program Similar Articles Productive Geek Tips Format a String as Currency in C#Convert Older Excel Documents to Excel 2007 FormatShare OneNote 2010 Notebooks with OneNote 2007Install an RPM Package on Ubuntu LinuxConvert PDF Files to Word Documents and Other Formats TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

  Read the article

• What Did You Do? is a Bad Question

  - by Ajarn Mark Caldwell

  Brian Moran (blog | Twitter) did a great presentation today for the PASS Professional Development Virtual Chapter on The Art of Questions.  One of the points that Brian made was that there are good questions and bad (or at least not-as-good) questions.  Good questions tend to open-up the conversation and engender positive reactions (perhaps even trust and respect) between the participants; and bad questions tend to close-down a conversation either through the narrow list of possible responses (e.g. strictly Yes/No) or through the negative reactions they can produce.  And this explains why I so frequently had problems troubleshooting real-time problems with users in the past.  I’ll explain that in more detail below, but before we go on, let me recommend that you watch the recording of Brian’s presentation to learn why the question Why is often problematic in the U.S. and yet we so often resort to it. For a short portion (3 years) of my career, I taught basic computer skills and Office applications in an adult vocational school, and this gave me ample opportunity to do live troubleshooting of user challenges with computers.  And like many people who ended up in computer related jobs, I also have had numerous times where I was called upon by less computer-savvy individuals to help them with some challenge they were having, whether it was part of my job or not.  One of the things that I noticed, especially during my time as a teacher, was that when I was helping somebody, typically the first question I would ask them was, “What did you do?”  This seemed to me like a good way to start my detective work trying to figure out what happened, what went wrong, how to fix it, and how to help the person avoid it again in the future.  I always asked it in a polite tone of voice as I was just trying to gather the facts before diving in deeper.  However; 99.999% of the time, I always got the same answer, “Nothing!”  For a long time this frustrated me because (remember I’m in detective mode at that point) I knew it could not possibly be true.  They HAD to have done SOMETHING…just tell me what were the last actions you took before this problem presented itself.  But no, they always stuck with “Nothing”.  At which point, with frustration growing, and not a little bit of disdain for their lack of helpfulness, I would usually ask them to move aside while I took over their machine and got them out of whatever they had gotten themselves into.  After a while I just grew used to the fact that this was the answer I would usually receive, but I always kept asking because for the .001% of the people who would actually tell me, I could then help them understand what went wrong and how to avoid it in the future. Now, after hearing Brian’s talk, I understand what the problem was.  Even though I meant to just be in an information gathering mode, the words I was using, “What did YOU do?” have such a strong negative connotation that people would instinctively go into defense-mode and stop sharing information that might make them look bad.  Many of them probably were not even consciously aware that they had gone on the defensive, but the self-preservation instinct, especially self-preservation of the ego, is so strong that people would end up there without even realizing it. So, if “What did you do” is a bad question, what would have been better?  Well, one suggestion that Brian makes in his talk is something along the lines of, “Can you tell me what led up to this?” or “what was happening on the computer right before this came up?”  It’s subtle, but the point is to take the focus off of the person and their behavior; instead depersonalizing it and talk about events from more of a 3rd-party observer point of view.  With this approach, people will be more likely to talk about what the computer did and what they did in response to it without feeling the interrogation spotlight is on them.  They are also more likely to mention other events that occurred around the same time that may or may not be related, but which could certainly help you troubleshoot a larger problem if it is not just user actions.  And that is the ultimate goal of your asking the questions.  So yes, it does matter how you ask the question; and there are such things as good questions and bad questions.  Excellent topic Brian!  Thanks for getting the thinking gears churning! (Cross-posted to the Professional Development Virtual Chapter blog.)

  Read the article

• Context Issue in ASP.NET MVC 3 Unobtrusive Ajax

  - by imran_ku07

      Introduction:          One of the coolest feature you can find in ASP.NET MVC 3 is Unobtrusive Ajax and Unobtrusive Client Validation which separates the javaScript behavior and functionality from the contents of a web page. If you are migrating your ASP.NET MVC 2 (or 1) application to ASP.NET MVC 3 and leveraging the Unobtrusive Ajax feature then you will find that the this context in the callback function is not the same as in ASP.NET MVC 2(or 1). In this article, I will show you the issue and a simple solution.       Description:           The easiest way to understand the issue is to start with an example. Create an ASP.NET MVC 3 application. Then add the following javascript file references inside your page,   <script src="@Url.Content("~/Scripts/MicrosoftAjax.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/MicrosoftMvcAjax.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery-1.4.4.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.unobtrusive-ajax.js")" type="text/javascript"></script>             Then add the following lines into your view,   @Ajax.ActionLink("About", "About", new AjaxOptions { OnSuccess = "Success" }) <script type="text/javascript"> function Success(data) { alert(this.innerHTML) } </script>              Next, disable Unobtrusive Ajax feature from web.config,   <add key="UnobtrusiveJavaScriptEnabled" value="false"/>              Then run your application and click the About link, you will see the alert window with "About" message on the screen. This shows that the this context in the callback function is the element which is clicked. Now, let's see what will happen when we leverage Unobtrusive Ajax feature. Now enable Unobtrusive Ajax feature from web.config,     <add key="UnobtrusiveJavaScriptEnabled" value="true"/>              Then run your application again and click the About link again, this time you will see the alert window with "undefined" message on the screen. This shows that the this context in the callback function is not the element which is clicked. Here, this context in the callback function is the Ajax settings object provided by jQuery. This may not be desirable because your callback function may need the this context as the element which triggers the Ajax request. The easiest way to make the this context as the element which triggers the Ajax request is to add this line in jquery.unobtrusive-ajax.js file just before $.ajax(options) line,   options.context = element;              Then run your application again and click the About link again, you will find that the this context in the callback function remains same whether you use Unobtrusive Ajax or not.       Summary:          In this article I showed you a breaking change and a simple workaround in ASP.NET MVC 3. If you are migrating your application from ASP.NET MVC 2(or 1) to ASP.NET MVC 3 and leveraging Unobtrusive Ajax feature then you need to consider this breaking change. Hopefully you will enjoy this article too.     SyntaxHighlighter.all()

  Read the article

• Five Reasons to Attend PLM Summit 2013: The Conference Formerly Known as AGILITY

  - by Terri Hiskey

  As we approach the end of 2012, we are also closing in on the last couple of weeks that Agile customers and prospects can register for the upcoming PLM Summit 2013 for the bargain early bird rate of $195. Register now to secure your spot! The Conference Formerly Known as AGILITY... Long-time Agile customers may remember AGILITY, which was Agile's PLM customer conference that was held on an annual basis prior to Oracle's acquisiton of Agile in 2007. In February 2012, due to feedback we received from our Agile PLM community, we successfully resurrected the AGILITY conference and renamed it the PLM Summit. The PLM Summit was so well received and well-attended, that we are doing it again in 2013. This upcoming PLM Summit is being co-located in San Francisco under the overarching banner of the Oracle Value Chain Summit, and will be held alongside several other Oracle customer conferences that cover a range of value chain solutions, including Value Chain Planning, Value Chain Execution, Procurement, Maintenance and Manufacturing. This setup offers PLM attendees the best of all worlds--the opportunity to participate and learn about PLM in smaller, focused sessions by product and by industry, while also giving attendees the chance to see how PLM works together with other critical enterprise applications that address other important aspects of the value chain. Top Five Reasons to Attend the PLM Summit 2013 In the spirit of all of the end-of-the-year lists that are currently popping up, here is a list of the top five reasons to attend the PLM Summit for anyone out there needs a little extra encouragement to register: 1. The Best Opportunities for Customer Networking   The PLM Summit offers attendees numerous opportunities to learn and network with fellow Agile users. Customer stories are featured in keynote and breakout presentations and the schedule allows for plenty of networking time during breakfasts, lunches, breaks and dinners. Customer networking is the number one reason that Agile users attend the PLM Summit. Read what attendees thought of the most recent PLM Summit: "Hearing about the implementation of Agile products from a customers’ perspective is invaluable." - Director of Quality Assurance & Regulatory Affairs, leading medical device manufacturer "Understanding the scope of other companies’ projects and the lessons learned made attending this event well worth my time." - Director of Test Engineering, global industrial manufacturer "The most beneficial thing about attending this event is the opportunity to network with other customers with similar experiences." - Director of Business Process Improvement, leading high technology company Come to the PLM Summit and play an active role within the PLM community: swap war stories and business cards, connect on LinkedIn and Facebook, share your stories and discuss the sessions from each day. Register now! 2. It's Educational! The PLM Summit is the premier educational event for anyone in the Agile PLM community. There are nearly 40 PLM-focused in-depth educational sessions led by Agile PLM experts, customers and partners that will cover a range of specific product and industry-focused topics. Keynotes will give attendees a broad overview of the entire Agile PLM footprint, while sessions will delve deeply into specific product functionality and customer case studies. There is truly something for everyone. Check out the latest agenda for view of all the sessions. 3. Visit with the PLM Partner Community Our partners play a significant and important role within the Agile PLM community. At the PLM Summit, attendees will be able to meet and mingle with several of the top Oracle Agile PLM partners including: Deloitte, Domain, GoEngineer, Hitachi Consulting, IBM, Kalypso, KPIT Cummins (CPG Solutions), Perception Software, Verdant, Xavor and ZeroWaitState. Go here for a complete list of all the Value Chain Summit sponsors. 4. See Agile PLM in Action at our Dedicated PLM Demo Pods At the PLM Summit, attendees will have the chance to see Agile PLM in action at dedicated PLM demo pods, manned by expert members of our Agile PLM team. If you would like to see up close specific Agile PLM functionality, or if you have a question on how to extend the scope of your current implemention or if you want a better understanding of how to leverage Agile PLM to address specific use-cases, stop by one of the Agile PLM demo pods and engage the Agile PLM experts on hand at the PLM Summit. 5. Spend Some Time in Lovely San Francisco Still on the fence about the upcoming PLM Summit? Remember that it is being held in San Francisco, which is a fantastic city for a getaway. After spending time learning and networking about PLM, take an extra day or two to escape the dreary winter and enjoy the beautiful scenery and the unique actitivies offered only by the City by the Bay. You will walk away from the conference not only with renewed excitement about Agile PLM, but feeling rejuvenated in general.

  Read the article

• Extending QuickBooks Reporting with the QuickBooks ADO.NET Data Provider

  - by dataintegration

  The ADO.NET Provider for QuickBooks comes with several reports you may request from QuickBooks by default. However, there are many more that are not readily available. The ADO.NET Provider for QuickBooks makes it easy for you to create new reports and customize existing ones. In this article, we will illustrate how to create your own report and retrieve it from the Server Explorer in Visual Studio. For this example we will show how to create an Item Profitability Report. Creating the report script file Step 1: Download the sample reports available here. Extract them to a folder of your choice. Step 2: Make a copy of the ReportGeneralSummary.rsd file and rename it to ItemProfitability.rsd. Then open the file in any text editor. Step 3: Open the installation directory of the ADO.NET Provider for QuickBooks. Under the \db\ folder, locate the ReportJob.rsb file. Open this file in another text editor. Note: Although we are using ReportJob.rsb for this example, other reports may be contained in other Report*.rsb files. We recommend consulting the included help file and first locating the Report stored procedure and ReportType you are looking for. Otherwise, you may open each Report*.rsb file and look under the "reporttype" input for the report you are attempting to create. Step 4: First, let's rename the title of ItemProfitability.rsd. Near the top of the file you will see a title and description. Change the title to match the name of the file. Change the description to anything you like. For example: <rsb:info title="ItemProfitability" description="Executes my custom report."> Just below the Title, there are a number of columns. The Id represents the row number. The RowType represents the type of data returned by QuickBooks. The ColumnValue* columns represent all of the column data returned by QuickBooks. In some instances, we may need to add additional ColumnValue columns. Step 5: To add additional ColumnValue columns, simply copy the last column, paste it directly below, and continue increasing the numerical value at end of the attribute name. For example: <attr name="ColumnValue9" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue10" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue11" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> <attr name="ColumnValue12" xs:type="string" readonly="true" required="false" desc="Represents a column of data."/> ... Caution: Do not rename the ColumnValue* definitions themselves. They are generalized so that we can understand each type of report returned by QuickBooks. Renaming them to something other than ColumnValue* will cause your columns to return with null values. Step 6: Now let's update the available inputs for the table. From the ReportJob.rsb file, copy all of the input elements into ItemProfitability under the "Psuedo-Column definitions" comment. You will be replacing the existing input elements in ItemProfitability with inputs from ReportJob. When you are done, it should look like this: <!-- Psuedo-Column definitions --> <input name="reporttype" description="The type of the report." value="ITEMESTIMATESVSACTUALS,ITEMPROFITABILITY,JOBESTIMATESVSACTUALSDETAIL,JOBESTIMATESVSACTUALSSUMMARY,JOBPROFITABILITYDETAIL,JOBPROFITABILITYSUMMARY," default="ITEMESTIMATESVSACTUALS" /> <input name="reportperiod" description="Report date range in the format (fromdate:todate), and either value may be omitted for an open ended range (e.g. 2009-12-25:). Supported date format: yyyy-MM-dd." /> <input name="reportdaterangemacro" description="Use a predefined date range." value="ALL,TODAY,THISWEEK,THISWEEKTODATE,THISMONTH,THISMONTHTODATE,THISQUARTER,THISQUARTERTODATE,THISYEAR,THISYEARTODATE,YESTERDAY,LASTWEEK,LASTWEEKTODATE,LASTMONTH,LASTMONTHTODATE,LASTQUARTER,LASTQUARTERTODATE,LASTYEAR,LASTYEARTODATE,NEXTWEEK,NEXTFOURWEEKS,NEXTMONTH,NEXTQUARTER,NEXTYEAR," default="ALL" /> ... Step 7: Now let's update the operationname attribute. This needs to match the same operationname used by ReportJob. After you have copied the correct value from ReportJob.rsb, the operationname in ItemProfitability should look like so: <rsb:set attr="operationname" value="qbReportJob"/> Step 8: There is one more thing we can do to make this a true Item Profitability report. We can remove the reporttype input and hardcode the value. To do this, copy and paste the rsb:set used for operationname. Then rename the attr and value to match the name and value you want to use. For example: <rsb:set attr="operationname" value="qbReportJob"/> <rsb:set attr="reporttype" value="ITEMPROFITABILITY"/> After this you can remove the input for reporttype. Now that you have your own report file, we can move on to displaying the report in the Visual Studio server explorer. Accessing the report through the Data Provider Step 1: Open Visual Studio. In the Server Explorer, configure a new connection with the QuickBooks Data Provider. Step 2: For the Location connection string property, enter the directory where the new report has been saved to. Step 3: The new report should appear as a new view in the Server Explorer. Let's retrieve data from it. Step 4: You can specify any inputs in the WHERE clause. New Report Example Script To help you get started using this new QuickBooks Data Provider report, you will need to download the QuickBooks ADO.NET Data Provider and the fully functional sample script.

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• Recover that Photo, Picture or File You Deleted Accidentally

  - by The Geek

  Have you ever accidentally deleted a photo on your camera, computer, USB drive, or anywhere else? What you might not know is that you can usually restore those pictures—even from your camera’s memory stick. Windows tries to prevent you from making a big mistake by providing the Recycle Bin, where deleted files hang around for a while—but unfortunately it doesn’t work for external USB drives, USB flash drives, memory sticks, or mapped drives. The great news is that this technique also works if you accidentally deleted the photo… from the camera itself. That’s what happened to me, and prompted writing this article. Restore that File or Photo using Recuva The first piece of software that you’ll want to try is called Recuva, and it’s extremely easy to use—just make sure when you are installing it, that you don’t accidentally install that stupid Yahoo! toolbar that nobody wants. Now that you’ve installed the software, and avoided an awful toolbar installation, launch the Recuva wizard and let’s start through the process of recovering those pictures you shouldn’t have deleted. The first step on the wizard page will let you tell Recuva to only search for a specific type of file, which can save a lot of time while searching, and make it easier to find what you are looking for. Next you’ll need to specify where the file was, which will obviously be up to wherever you deleted it from. Since I deleted mine from my camera’s SD card, that’s where I’m looking for it. The next page will ask you whether you want to do a Deep Scan. My recommendation is to not select this for the first scan, because usually the quick scan can find it. You can always go back and run a deep scan a second time. And now, you’ll see all of the pictures deleted from your drive, memory stick, SD card, or wherever you searched. Looks like what happened in Vegas didn’t stay in Vegas after all… If there are a really large number of results, and you know exactly when the file was created or modified, you can switch to the advanced view, where you can sort by the last modified time. This can help speed up the process quite a bit, so you don’t have to look through quite as many files. At this point, you can right-click on any filename, and choose to Recover it, and then save the files elsewhere on your drive. Awesome! Restore that File or Photo using DiskDigger If you don’t have any luck with Recuva, you can always try out DiskDigger, another excellent piece of software. I’ve tested both of these applications very thoroughly, and found that neither of them will always find the same files, so it’s best to have both of them in your toolkit. Note that DiskDigger doesn’t require installation, making it a really great tool to throw on your PC repair Flash drive. Start off by choosing the drive you want to recover from…   Now you can choose whether to do a deep scan, or a really deep scan. Just like with Recuva, you’ll probably want to select the first one first. I’ve also had much better luck with the regular scan, rather than the “dig deeper” one. If you do choose the “dig deeper” one, you’ll be able to select exactly which types of files you are looking for, though again, you should use the regular scan first. Once you’ve come up with the results, you can click on the items on the left-hand side, and see a preview on the right.  You can select one or more files, and choose to restore them. It’s pretty simple! Download DiskDigger from dmitrybrant.com Download Recuva from piriform.com Good luck recovering your deleted files! And keep in mind, DiskDigger is a totally free donationware software from a single, helpful guy… so if his software helps you recover a photo you never thought you’d see again, you might want to think about throwing him a dollar or two. Similar Articles Productive Geek Tips Stupid Geek Tricks: Undo an Accidental Move or Delete With a Keyboard ShortcutRestore Accidentally Deleted Files with RecuvaCustomize Your Welcome Picture Choices in Windows VistaAutomatically Resize Picture Attachments in Outlook 2007Resize Your Photos with Easy Thumbnails TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi

  Read the article

• SQL SERVER – TechEd India 2012 – Content, Speakers and a Lots of Fun

  - by pinaldave

  TechEd is one event which every developers and IT professionals are looking forward to attend. It is opportunity of life time and no matter how many time one gets chance to engage with it, it is never enough. I still remember every single moment of every TechEd I have attended so far. We are less than 100 hours away from TechEd India 2012 event.This event is the one must attend event for every Technology Enthusiast. Fourth time in the row I am going to attend this event and I am equally excited as the first time of the event. There are going to be two very solid SQL Server track this time and I will be attending end of the end both the tracks. Here is my view on each of the 10 sessions. Each session is carefully crafted and leading exeprts from industry will present it. Day 1, March 21, 2012 T-SQL Rediscovered with SQL Server 2012 – This session is going to bring some of the lesser known enhancements that were brought with SQL Server 2012. When I learned that Jacob Sebastian is going to do this session my reaction to this is DEMO, DEMO and DEMO! Jacob spends hours and hours of his time preparing his session and this will be one of those session that I am confident will be delivered over and over through out the next many events. Catapult your data with SQL Server 2012 Integration Services – Praveen is expert story teller and one of the wizard when it is about SQL Server and business intelligence. He is surely going to mesmerize you with some interesting insights on SSIS performance too. Processing Big Data with SQL Server 2012 and Hadoop – There are three sessions on Big Data at TechEd India 2012. Stephen is going to deliver one of the session. Watching Stephen present is always joy and quite entertaining. He shares knowledge with his typical humor which captures ones attention. I wrote about what is BIG DATA in a blog post. SQL Server Misconceptions and Resolutions – I will be presenting this Session along with Vinod Kumar. READ MORE HERE. Securing with ContainedDB in SQL Server 2012 – Pranab is expert when it is about SQL Server and Security. I have seen him presenting and he is indeed very pleasant to watch. A dry subject like security, he makes it much lively. A Contained Database is a database which contains all the necessary settings and metadata, making database easily portable to another server. This database will contain all the necessary details and will not have to depend on any server where it is installed for anything. You can take this database and move it to another server without having any worries. Day 3, March 23, 2012 Peeling SQL Server like an Onion: Internals Demystified – Vinod Kumar has been writing about this extensively on his other blog post. In recent conversation he suggested that he will be creating very exclusive content for this presentation. I know Vinod for long time and have worked with him along many community activities. I am going to pay special attention to the details. I know Vinod has few give-away planned now for attending the session now only if he shares with us. Speed Up – Parallel Processes and unparalleled Performance – Performance tuning is my favorite subject. I will be discussing effect of parallelism on performance in this session. Here me out, there will be lots of quiz questions during this session and if you get the answers correct – you can win some really cool goodies – I Promise! READ MORE HERE. Keep your database available – AlwaysOn – Balmukund is like an army man. He is always ready to show and prove that he has coolest toys in terms of SQL Server and he knows how to keep them running AlwaysON. Availability groups, Listener, Clustering, Failover, Read-Only replica etc all will be demo’ed in this session. This is really heavy but very interesting content not to be missed. Lesser known facts about SQL Server Backup and Restore – Amit Banerjee – this name is known internationally for solving SQL Server problems in 140 characters. He has already blogged about this and this topic is going to be interesting. A successful restore strategy for applications is as good as their last good known backup. I have few difficult questions to ask to Amit and I am very sure that his unique style will entertain people. By the way, his one of the slide may give few in audience a funny heart attack. Top 5 reasons why you want SQL Server 2012 BI – Praveen plans to take a tour of some of the BI enhancements introduced in the new version. Business Insights with SQL Server is a critical building block and this version of SQL Server is no exception. For the matter of the fact, when I saw the demos he was going to show during this session, I felt like that I wish I can set up all of this on my machine. If you miss this session – you will miss one of the most informative session of the day. Also TechEd India 2012 has a Live streaming of some content and this can be watched here. The TechEd Team is planning to have some really good exclusive content in this channel as well. If you spot me, just do not hesitate to come by me and introduce yourself, I want to remember you! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Create a Social Community of Trust Along With Your Federal Digital Services Governance

  - by TedMcLaughlan

  The Digital Services Governance Recommendations were recently released, supporting the US Federal Government's Digital Government Strategy Milestone Action #4.2 to establish agency-wide governance structures for developing and delivering digital services. Figure 1 - From: "Digital Services Governance Recommendations" While extremely important from a policy and procedure perspective within an Agency's information management and communications enterprise, these recommendations only very lightly reference perhaps the most important success enabler - the "Trusted Community" required for ultimate usefulness of the services delivered. By "ultimate usefulness", I mean the collection of public, transparent properties around government information and digital services that include social trust and validation, social reach, expert respect, and comparative, standard measures of relative value. In other words, do the digital services meet expectations of the public, social media ecosystem (people AND machines)? A rigid governance framework, controlling by rules, policies and roles the creation and dissemination of digital services may meet the expectations of direct end-users and most stakeholders - including the agency information stewards and security officers. All others who may share comments about the services, write about them, swap or review extracts, repackage, visualize or otherwise repurpose the output for use in entirely unanticipated, social ways - these "stakeholders" will not be governed, but may observe guidance generated by a "Trusted Community". As recognized members of the trusted community, these stakeholders may ultimately define the right scope and detail of governance that all other users might observe, promoting and refining the usefulness of the government product as the social ecosystem expects. So, as part of an agency-centric governance framework, it's advised that a flexible governance model be created for stewarding a "Community of Trust" around the digital services. The first steps follow the approach outlined in the Recommendations: Step 1: Gather a Core Team In addition to the roles and responsibilities described, perhaps a set of characteristics and responsibilities can be developed for the "Trusted Community Steward/Advocate" - i.e. a person or team who (a) are entirely cognizant of and respected within the external social media communities, and (b) are trusted both within the agency and outside as practical, responsible, non-partisan communicators of useful information. The may seem like a standard Agency PR/Outreach team role - but often an agency or stakeholder subject matter expert with a public, active social persona works even better. Step 2: Assess What You Have In addition to existing, agency or stakeholder decision-making bodies and assets, it's important to take a PR/Marketing view of the social ecosystem. How visible are the services across the social channels utilized by current or desired constituents of your agency? What's the online reputation of your agency and perhaps the service(s)? Is Search Engine Optimization (SEO) a facet of external communications/publishing lifecycles? Who are the public champions, instigators, value-adders for the digital services, or perhaps just influential "communicators" (i.e. with no stake in the game)? You're essentially assessing your market and social presence, and identifying the actors (including your own agency employees) in the existing community of trust. Step 3: Determine What You Want The evolving Community of Trust will most readily absorb, support and provide feedback regarding "Core Principles" (Element B of the "six essential elements of a digital services governance structure") shared by your Agency, and obviously play a large, though probably very unstructured part in Element D "Stakeholder Input and Participation". Plan for this, and seek input from the social media community with respect to performance metrics - these should be geared around the outcome and growth of the trusted communities actions. How big and active is this community? What's the influential reach of this community with respect to particular messaging or campaigns generated by the Agency? What's the referral rate TO your digital services, FROM channels owned or operated by members of this community? (this requires governance with respect to content generation inclusive of "markers" or "tags"). At this point, while your Agency proceeds with steps 4 ("Build/Validate the Governance Structure") and 5 ("Share, Review, Upgrade"), the Community of Trust might as well just get going, and start adding value and usefulness to the existing conversations, existing data services - loosely though directionally-stewarded by your trusted advocate(s). Why is this an "Enterprise Architecture" topic? Because it's increasingly apparent that a Public Service "Enterprise" is not wholly contained within Agency facilities, firewalls and job titles - it's also manifested in actual, perceived or representative forms outside the walls, on the social Internet. An Agency's EA model and resulting investments both facilitate and are impacted by the "Social Enterprise". At Oracle, we're very active both within our Enterprise and outside, helping foster social architectures that enable truly useful public services, digital or otherwise.

  Read the article

< Previous Page | 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073  | Next Page >