Search Results

Search found 11707 results on 469 pages for 'boot failure'.

Page 107/469 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • AD-Integrated DNS failure: "Access was Denied"

    - by goldPseudo
    I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

    Read the article

  • SCCM 2012 R2 - OSD Task Sequence failure on physical computers

    - by user1422136
    I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

    Read the article

  • SCCM 2012 R2 - OSD Task Sequence failure on physical computers

    - by Svanste
    I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

    Read the article

  • How to troubleshoot Hyper-V VSS writer causing backup failure on Server 2008 R2

    - by Tim Anderson
    I have a Windows Server 2008 R2 machine running Hyper-V. Backups using Windows Server Backup fail with the error: The backup operation that started at '?2011?-?01?-?02T10:37:01.230000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved. I have traced this to a problem with the Hyper-V VSS writer. vssadmin list writers reports: Writer name: 'Microsoft Hyper-V VSS Writer' Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} Writer Instance Id: {fcf0dd79-d282-4465-88ae-7b6857e055c2} State: [8] Failed Last error: Inconsistent shadow copy However I can't get any further. A few relevant facts: I get the error even if all the VMs are shut down If I disable the Hyper-V VSS Writer by stopping the Hyper-V Management Service backup completes OK There are no errors in the Hyper-V-VMMS application log I tried to set tracing for VSS but can't get any output for some reason. I set the correct registry entries but no trace log is generated. Tim

    Read the article

  • Failure sending mails using Microsoft Exchange

    - by Yves
    Hi, I seem to have a problem configuring my Microsoft Exchange to send mails outisde of the domain. I have setup my smtp connectors and everything else. I can receive mails but I can't seem to send any. I keep getting #5.5.0 smtp;550 Sender verify failed Anyone has an idea how I could fix that? Regards, Yves

    Read the article

  • Screen is greyed out after power failure shutdown: Mac OSX

    - by Don MacLachlan
    When the battery power is down and the unit not plugged in the computer is forced into a sleep mode requiring pushing the start button when power is re-connected. The initial desktop screen appears to be greyed out and is unresponsive with a timer bar which, when the timing sequence is complete restores an active desktop. I can't find any reference to this phenomenon in the OSX literature I have. Any pointers to where I can get more information? Perhaps I am using the wrong search criteria?

    Read the article

  • XP Client for NFS failure dialog on startup, but drive mapping works

    - by Matt Bennett
    I'm mounting an NFS share to some windows machines using the tools that come in the Services for UNIX Administration toolkit. I've set up the User Name Mapping service to use local passwd and group files. I had to manually start the User Name Mapping service, and then created an 'advanced map' from the XP machine's user to a uid that exists in on my NFS server, like so: Windows User: Matt Bennett UNIX Domain: PCNFS UNIX User: mattbennett UID: 10250 Primary: * I can map a network drive without any issues, and it correctly identifies the UID and GID to use, but when I reboot I get this message: "An error occurred while connecting to the NFS server. Make sure that the Client for NFS service has started. If the problem persists make sure Client for NFS service can communicate with User Name Mapping or PCNFS server." After dismissing the dialog, the machine finishes booting and the network drive is there in My Computer with the title "Disconnected Network Drive", but I can open it I can see the network share without a problem, and then it drops the 'disconnected' from its title. It seems like the services are starting in the wrong order or something, so the first attempt to connect fails but subsequent ones work as expected. There don't seem to be any symptoms apart from the dialog box, but obviously something's not quite right. What have I done wrong? Thanks, Matt.

    Read the article

  • Android failure to boot on LG [migrated]

    - by Ukavi
    I need to recover data from my AT&T LG Thrill Android Phone Background: My AT&T LG Thrill phone's battery died a couple of days ago because I forgot to charge it. When I charged the phone and tried to turn it on, it showed the LG logo followed by the dropping balls and the AT&T "Rethink Possible" screen. I then get a mesage that the Application Google Services Framework has crashed and the phone goes into a loop with the dropping balls showing again followed by "Rethink Possible" screen. This sequence repeats itself over and over and the phone does not get out of this loop. I have been able to go into the recovery screen (both Safe Mode and the Android Recovery Service) and have cleared cache, etc. However, I DO NOT want to wipe user data and restore to factory settings as this will wipe all of my data (pictures, application data, etc). Solution Needed: I need a suggestion to a way of accessing my data so that I can back it up onto an SD card/computer. I DO NOT want to root the phone as this may void the warranty. What I'm looking for is a way of perhaps putting the original flash image on the micro SD card and then have the phone read that image. Or some other similar solution that will get the phone out of this loop and allow me to get to the data.

    Read the article

  • Ubuntu 12.04 taking too much time to boot

    - by adarshdinesh
    Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

    Read the article

  • multi-user rvm gem install failure when called from CloudFormation::Init

    - by Peter Mounce
    I've taken an Amazon Linux AMI (based on CentOS) and installed RVM (1.10.3) to it in multi-user fashion (see {1} below). I used that to install ruby 1.9.3-p125, rubygems 1.8.17, and bundler 1.1 as the baseline requirements for most things I'm going to be using the instances for. I've captured that instance to an AMI, and am now launching it via CloudFormation, with some CloudFormation::Init commands. One of them is to use s3cmd to pull down a private gem from S3, and the next one, the one that fails, is to install that gem. It fails with an error message 2012-03-15 16:53:20,201 [ERROR] Command 20_install_gems (/usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem install ./*.gem) failed 2012-03-15 16:53:20,202 [DEBUG] Command 20_install_gems output: /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12:in `require': no such file to load -- rubygems (LoadError) from /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12 Now, that happens during the cfn-init execution - I assume, but haven't checked yet, that cfn-init is being run with an environment different from that of ec2-user (there are no other users on the instance). If I run gem install mygem.gem in an interactive session then that works fine. So, my question really, is what should I do to make this work for cfn-init? Have I correctly set up rvm as multi-user? I've confirmed that cfn-init is being run as the root user, with his restricted environment. How should I source the /etc/profile.d/rvm.sh into root's sessions? {1} My semi-automated rvm installation steps (run in interactive session as ec2-user): sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer ) sudo gpasswd -a ec2-user rvm # iconv-devel is baked into centos' glibc sudo yum install -y autoconf automake bison bzip2 gcc-c++ git libffi-devel libtool libxml2-devel libxslt-devel libyaml-devel make openssl-devel patch readline readline-devel zlib zlib-devel source /etc/profile.d/rvm.sh rvm list known # in a new session: rvm install ruby-1.9.3-p125 rvm use 1.9.3 --default gem update --system # gems required by public_web-awareness gem install aws-sdk bundler cocaine sinatra echo -e "gem: --no-ri --no-rdoc\n" > /home/ec2-user/.gemrc # delete unnecessary documentation files rm -rf `gem env gemdir`/doc sudo -s sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/skel/.gemrc sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/gemrc # ctrl + d out of the sudo session Some environment information: [ec2-user@ip ~]$ echo $PATH /usr/local/rvm/gems/ruby-1.9.3-p125/bin:/usr/local/rvm/gems/ruby-1.9.3-p125@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p125/bin:/usr/local/rvm/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/aws/bin:/home/ec2-user/bin [ec2-user@ip ~]$ echo $GEM_HOME /usr/local/rvm/gems/ruby-1.9.3-p125 [ec2-user@ip ~]$ echo $GEM_PATH /usr/local/rvm/gems/ruby-1.9.3-p125:/usr/local/rvm/gems/ruby-1.9.3-p125@global [ec2-user@ip ~]$ echo $BUNDLE_PATH [ec2-user@ip ~]$ gem list *** LOCAL GEMS *** aws-sdk (1.3.6) bundler (1.1.0) cocaine (0.2.1) httparty (0.8.1) json (1.6.5) multi_json (1.1.0) multi_xml (0.4.1) nokogiri (1.5.1, 1.5.0) rack (1.4.1) rack-protection (1.2.0) rake (0.9.2) sinatra (1.3.2) tilt (1.3.3) uuidtools (2.1.2) yamler (0.1.0)

    Read the article

  • Wireless Keyboard Intermittent Failure to Type and Added Characters

    - by Kashif
    My keyboard has been acting up from time to time. It's wireless so this may be a wireless issue. What happens is I will be typing and then all of a sudden it seems to stop responding. If I type out this sentence it may show up like so If I ttennnnnnnnn it may ssssssp so While typing that sentence I may have to mash on a key repeatedly to get it to type. The resulting strings of letters seem to be coming as if the keyboard buffer cannot keep up. It's so weird. If I take the USB tranceiver and yank it out then plug it back in, Voila! Problem solved. I did the battery check so that's not a problem. Any suggestions? My keyboard is the Logitech MX3200

    Read the article

  • TCP failure on Solaris

    - by anurag kohli
    Hi All, I recently ran into a problem where a Solaris server could not establish a TCP socket on port 2126. From a packet capture I see this (note: A is a Solaris server, B is a router): A sends SYN to B B sends SYN, ACK to A Notice A (Solaris) does not acknowledge the SYN from B. Due to the business impact of the problem, I had to reboot the server to fix the problem. That said, I want to know the next time the problem occurs, what can I do to get a root cause (ie before server reboot)? Thanks in advance.

    Read the article

  • XP Restart After Power Failure

    - by Jim
    Hello, I've almost got my power settings sorted and was hoping someone could help? If I'm running XP and the power is cut, when the power is restored my machine auto restarts (this is what I want!) However, if I shutdown my machine properly (from the start menu & without touching the PC power button!), then switch the power off at the socket, then switch the power back on, the PC does not automatically restart. It's like the bios(?) recieives a message saying "aha, genuine shutdown and not a power cut, therefore do not restart on power restore." I want my PC to restart everytime it sees power restored from the socket? Any way round this? Anyone seen this before? I've upgraded my bios. Thanks in advance, Jim

    Read the article

  • Robocopy failure with Windows Server 2008 Scheduled Task

    - by CC
    So I have a batch script for robocopy. Running this from the command line does exactly what I want. robocopy "D:\SQL Backup" \\server1\Backup$\daily /mir /s /copyall /log:\\lmcrfs4g\NavBackup$\robocopyLog.txt /np Then I create a Scheduled Task in Windows Server 2008. If I set up the task to use my Domain Admin account, great. But I'm trying to get it to run as a separate domain account for Scheduled Tasks. If I use that account, folders get created, but files aren't copied. I get the following error: 2011/02/17 15:41:48 ERROR 1307 (0x0000051B) Copying NTFS Security to Destination Directory D:\SQL Backup\folder\ This security ID may not be assigned as the owner of this object. I've verified my domain\Scheduled Tasks account has Full Control NTFS permissions on both the source and destination, and the Full Control Sharing on my hidden \server1\backup$ share. Just for giggles, I've tried adding the domain account to the local Administrators group on both servers. This works fine, but that seems like a lot of privileges just to copy files. Any ideas on what I'm missing?

    Read the article

  • How do I start VNC Server on boot?

    - by broiyan
    How do I create a system-wide autostart file? This would be on a cloud server running the desktop version of Maverick. I logged in as root and created an autostart file using System/Preferences/StartupApplications but it ended up in /root/.config/autostart and did not execute (as far as I can tell) upon rebooting. The autostart file is to invoke a bash script that invokes the VNC server. I copied the .desktop autostart file from /root/.config/autostart to /etc/xdg/autostart and rebooted. This did not seem to make a difference.

    Read the article

  • HAProxy with 'backup' failure

    - by A.RG
    I have a simple configuration of 2 MySQL being load balanced by HAProxy. For an unfortunate reason I need to use them in Passive\Active mode. So I thought I'd configure one DB as 'backup' and go to sleep. But I was wrong. Whenever I add the 'backup' to the server line HAProxy throws a communication link error (essentially saying 'no DB available" (with the 'backup' it works great). It just doesnt consider that server as a valid option any more... I have tried this configuration: listen mysql 10.0.0.109:3307 mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup and also this configuration: frontend mysql_proxy bind 10.0.0.109:3307 default_backend mysql backend mysql mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup Nothing worked! Can anyone point me in the right direction? Thanks

    Read the article

  • Windows7 x64 clipboard failure

    - by Konoplianko
    Hi. I'm using windows 7 x64 and i need to work with citrix client. Unfortunately my clipboard stops working after 5-10 minutes with citrix apps. I can't copy/paste anything. But on citrix clipboard is still working. Problem disappears after rebooting computer. But it's takes too much time. Is there any way to restart clipboard process or fix this problem without rebooting ? Thanks ! UPD.1 Copy/Paste is broken only on my local computer. It means that when I'm pressing ctrl+c (also when doing the same with mouse) ctrl+v pastes nothing (in GUI menu it's highlighted with gray - disabled). Occasionally it repairs itself when I'm starting rebooting: nsd.exe crashes with some exception, reboot stops and then it works again. But I'm still not sure that problem is in nsd.exe (Lotus notes)

    Read the article

  • SSD with multiple partitions - disk life implications

    - by Nicolas Webb
    Each block on a SSD has a finite number of writes. This is mitigated on modern drives by "spreading" the writes around as you use the drive. I'm wondering if you partition a SSD into several partitions (a Mac using Boot Camp, for example) if this measure is defeated somewhat - can the writes be spread across the entire drive? Or are they contained strictly within the partition boundaries? Any SSD controller engineers here :)?

    Read the article

  • Laptop freezes on boot, not sure where to start

    - by J. Pablo Fernández
    I have an Ubuntu laptop that stops responding when booting up. It will change between consoles with ctrl-alt-FN but pressing enter in the console would not even enter a blank line. The last printed line when booting up in recovery mode was "Skipping EDID probe due to cached edid". Any ideas what might be wrong? Pressing ctrl-alt-del successfully rebooted it when in that mode. Another symptom is that GRUB stopped booting automatically, not sure if related (I doubt it).

    Read the article

  • T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

    - by Edward De Leau
    Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the vga output works. symptom: Screen blanks / no display but works on second monitor steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noice of about 10 seconds) - right after the sounds ends the monitor gets black times seem to be the same each time. software: installed no new software before/after, running zone alarm and antivirus. other: it does not feel hot in any place, there dont seem to be running processes with strange behaviour. warranty: out of warranty what was i doing: typing text on a website and doing some php coding in a text editor. Anyone any idea what I can do here other than buy a new laptop? / does it sound familiar to known cases? update: * exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj) here: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 and here: "i have that same problem. i replaced the CCRL on mine and it works fine when the screen is not screwed in. once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the lcd is no use, he tried it 3 times). same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core isse but some electric issue so it seems replacing the LCD is not the thing todo here. I have the following question: If it is not the LCD that needs to be replaced (see other threads) which parts can I order to fix this? Has anyone got any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense?

    Read the article

  • HP Pavillion DV6500 recovery disk failure

    - by Scott W
    I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

    Read the article

  • Re-Initialize RAID-0 in software after card failure

    - by Ben
    I'm working on a Friend's WD MyBook "1TB" HDD that is not mounting. When I got in to it, I discovered that it is really 2 500GB HDD's set up as RAID-0. It appears that the drives themselves are fine, but that the logic board has failed. My questions is this: can I re-initialize the RAID-0 using software RAID so that I can recover the data to another drive? If so, how and which software RAID would be best (Preferably open source. any platform OK).

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >