Search Results

Search found 30252 results on 1211 pages for 'network programming'.

Page 1074/1211 | < Previous Page | 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081  | Next Page >

  • Web server with static IP from cable provider

    - by Dmitri
    I have a subscription to 5 static IP addresses. I want to run a web server from behind a router. My network config is as follows: Server's local address is 10.1.10.2, has IIS running on it, port 80 and 443 (IIS is not my fault, had to be done) the server's ip address is static, the subnet mask is 255.255.255.0, gateway is 10.1.10.1, which is the local address of the cable modem / router / gateway thingy. All looks to be in textbook order as far as the LAN goes. I can get to anything on my LAN from any computer on my LAN, whether they have static IP or get it through DHCP from the cable modem/router thingy. however, I have no internet access form any of my LAN computers. I called Comcast tech support and they say they can connect to my modem/router just fine and can actually use it to ping any computer on the internet or any computer on my LAN from the router/modem (i checked, myself, this is in fact the case). However, nothing on my LAN has internet connectivity. I tried pinging the DNS servers, nothing. I tried directly typing in web sites' IP addresses, nothing, so doesn't seem to be a DNS issue. Any Ideas? What malfunction of a router could be causing such weird behavior? nay ideas or educated guesses are very much appreciated.

    Read the article

  • SCCM 2012 - some remote clients unable to download some applications, 401.2 error

    - by growse
    I've got a small SCCM 2012 deployment with about 35 clients attached. Most of these clients are in the same network as the single SCCM host, but three are about 1000 miles away. Oddly, these three clients have stopped being able to download some application packages over BITS. Publishing a new package works for all the other clients, but for these three it never seems to download. If I go to the software centre, it just hangs at "0% downloaded". On the client, the DataTransfer.log says (repeatedly): CDTSJob::HandleErrors: DTS Job '{2DCBBB4C-6D84-479A-9218-885B72C834B9}' BITS Job '{E78147DD-4A26-4942-B4FD-6EC3EB77EECD}' under user 'S-1-5-18' OldErrorCount 442 NewErrorCount 443 ErrorCode 0x80072EE2 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) CDTSJob::HandleErrors: DTS Job ID='{2DCBBB4C-6D84-479A-9218-885B72C834B9}' URL='http://sccm-host:80/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1' ProtType=1 DataTransferService 30/07/2012 09:27:41 2964 (0x0B94) Cas.log says (repeatedly): Location update from CTM for content Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 and request {AD041FCB-03D2-4FE6-A6FA-38A6B80FB2A1} ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download location found 0 - http://lonsbrndsccm02.mcs.int.thomsonreuters.com/SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1 ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) Download request only, ignoring location update ContentAccess 30/07/2012 08:33:39 5048 (0x13B8) On the server, I've enabled failed request log tracing. The raw IIS log says the following: 2012-07-30 08:28:42 10.13.111.35 GET /SMS_DP_SMSPKG$/Content_3e7f6982-6346-4f27-ae00-ad5dcb391455.1/sccm /NSCP-0.4.0.172-x64.msi 80 - 10.2.27.19 Microsoft+BITS/7.5 401 2 5 293 Which is a 401.2 error, meaning access denied. The failed request log is large, but the punchline is that it chucks out a Unauthorized: Access is denied due to invalid credentials. message. All clients are members of the same domain and appear to be (otherwise) working great. I've re-installed the SCCM client, deleted and re-added the computer to SCCM. Some other packages seem to work fine, the daily anti-malware delta gets downloaded and patched without issue. Why are these packages failing?

    Read the article

  • ipvsadm lists a few hosts by IP only, rest by name

    - by dmourati
    We use keepalived to manage our Linux Virtual Server (LVS) load balancer. The LVS VIPs are setup to use a FWMARK as configured in iptables. virtual_server fwmark 300000 { delay_loop 10 lb_algo wrr lb_kind NAT persistence_timeout 180 protocol TCP real_server 10.10.35.31 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.31" misc_timeout 30 } } real_server 10.10.35.32 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.32" misc_timeout 30 } } real_server 10.10.35.33 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.33" misc_timeout 30 } } real_server 10.10.35.34 { weight 24 MISC_CHECK { misc_path "/usr/local/sbin/check_php_wrapper.sh 10.10.35.34" misc_timeout 30 } } } http://www.austintek.com/LVS/LVS-HOWTO/HOWTO/LVS-HOWTO.fwmark.html [root@lb1 ~]# iptables -L -n -v -t mangle Chain PREROUTING (policy ACCEPT 182G packets, 114T bytes) 190M 167G MARK tcp -- * * 0.0.0.0/0 w1.x1.y1.4 multiport dports 80,443 MARK set 0x493e0 62M 58G MARK tcp -- * * 0.0.0.0/0 w1.x1.y2.4 multiport dports 80,443 MARK set 0x493e0 [root@lb1 ~]# ipvsadm -L IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn FWM 300000 wrr persistent 180 -> 10.10.35.31:0 Masq 24 1 0 -> dis2.domain.com:0 Masq 24 3 231 -> 10.10.35.33:0 Masq 24 0 208 -> 10.10.35.34:0 Masq 24 0 0 At the time the realservers were setup, there was a misconfigured dns for some hosts in the 10.10.35.0/24 network. Thereafter, we fixed the DNS. However, the hosts continue to show up as only their IP numbers (10.10.35.31,10.10.35.33,10.10.35.34) above. [root@lb1 ~]# host 10.10.35.31 31.35.10.10.in-addr.arpa domain name pointer dis1.domain.com. OS is CentOS 6.3. Ipvsadm is ipvsadm-1.25-10.el6.x86_64. kernel is kernel-2.6.32-71.el6.x86_64. Keepalived is keepalived-1.2.7-1.el6.x86_64. How can we get ipvsadm -L to list all realservers by their proper hostnames?

    Read the article

  • HP ProCurve & Cisco switches interoperability

    - by Kamil Z
    I have a couple of questions regarding Cisco and HP ProCurve interoperability. Here's a link to pdf with my network topology. Can someone help me with basic VLAN configuration in such topology? Below there are some details of my configuration: # m_management_2 interface FastEthernet0/43 switchport access vlan 250 switchport mode access spanning-tree port-priority 32 spanning-tree cost 100 # MTA2-swmgmt1 vlan 1 name "DEFAULT_VLAN" untagged 1-48 ip address 10.10.249.190 255.255.255.128 exit # MTA2-swtr1 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.188 255.255.255.128 exit # MTA2-swtr2 vlan 1 name "DEFAULT_VLAN" untagged 1-14,16-48 no ip address no untagged 15 exit vlan 100 name "MTA Mgmt" untagged 15 ip address 10.10.249.189 255.255.255.128 exit I don't post MTA2-bcsw[12] configuration, because I wasn's successfull in this one yet. Every time I configure VLANs on MTA2-bcsw[12] Fa0/24 interface on m_management_2 goes down bacause of receiving tagged BPDUs on access port (there are no VLANs configured on MTA2-swmgmt1 because of fact that only 250 VLAN is allowed in this switch. Is it correct?). Can someone provide me some basic configuration for this topology? Second thing I want to ask is concept of connection from MTA2-swmgmt1 to MTA2-swtr[12] HP switches for the sake of management. How to configure such ports on HP switches (managed switch and manager switch). Is my actual configuration correct?

    Read the article

  • Scheduled tasks fail to start unless I'm logged in to the server

    - by Chuck
    Tasks need to open a CMD window and pass net use commands, then do a DIR command, pipping the output to a file on the server. Log in as either me (Sysadmin) or with one of the system accounts and task will only run if I'm physically logged into the server. Run as batch file is set in security properties for both users (me and service account), security is granted to all directories, etc. It almost acts like a scheduled task, since it is not physically connected to a display can't create a CMD window and pass the WinID so the command can be sent. I'm guessing. Anyone know of a document that explains how the server handles initiation of a window if done via scheduled task and no attached user is associated with the task? If I log onto the box and run the scheduled tasks they run fine, but produce no errors or event log entries and then just show that it ran successfully and sets the next run time. Have tried both with the run if logged in checkbox on and off and makes no difference. Other tasks work fine, except that they are acting on local drives with no display writing or updating taking place, so I'm guessing the system either can't instantiate a window if no display is connected to a logged on user, or it can't establish a point if it is trying to create a virtual screen. You'd think it is just creating a memory map and then mapping it to a device to display, but that doesn't seem to be the case, but I can find no documentation on how the system handles a scheduled task and how to invoke a fake or virtual screen that it could write to so it appears that a user was connected. Thanks This is driving me nuts and I've tried everything I can think of as well as our network boys ideas and nothing seems to work.

    Read the article

  • Virtual Machines Renaming/Backing up/Sharing

    - by evan
    I've started using VMware virtual machines for all of my software development projects and have a few questions for others doing the same thing. First, how can you rename the virtual machine and the name of the virtual hard drive? I have a base development machine that I clone for different projects. I'd like to name the machine and it's hard drive according the the project (right now when I copy them via cut and paste, the file names remain the same and I can only organize them by putting them in a specific directory). Second, what is the best way to back up a virtual machine? Is it possible (by breaking the virtual hard drive up into chunks instead of one big file) to get incremental backups working? It seems time machine always tries to make a copy of the whole thing which is time consuming because each virtual machine is around 30GB. Finally, how slow would it be to have a virtual machine shared on an NFS mount on a wireless N network and used from multiple computers (but with only one person using it at a time.) Would it be more reasonable on a gigabit lan connection? Thanks for your input! And please feel free to share any advice or wisdom about using virtual machines for software development and the best ways to speed them up!

    Read the article

  • Force Windows Local Subnet Traffic through a Gateway

    - by Beerey
    Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

    Read the article

  • ubuntu 9.04 pptp broken after a power failure

    - by kevin42
    I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

    Read the article

  • 426 Connection closed; transfer aborted.

    - by Jiaoziren
    Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

    Read the article

  • IPv6: Can't ping anything - "Operation not permitted"

    - by Matthew Iselin
    I've been working on getting IPv6 support into my network, and had everything working properly for a short while. The server is running Ubuntu Server 8.10. Now however whenever I attempt to do anything related to IPv6 on the server, I get "Operation not permitted". This is coming from things like wide-dhcpv6-client (when trying to get an IPv6 address from the ISP) and radvd - both log errors of this type into syslog. Even pinging the loopback interface fails: xxx@gordon:~$ ping6 ::1 PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms xxx@gordon:~$ sudo ping6 ::1 sudo: unable to resolve host gordon PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms As you can see, I have attempted pinging as root, as most of the material I've found on the internet points to a permission problem. However, that has not helped. Any hints to getting unstuck would be appreciated.

    Read the article

  • VMWare Fusion: "No Permission to access this virtual machine"

    - by Craig Walker
    I had a VMWare Fusion VM backed up on my home network file server (Ubuntu). I wanted to run it again, so I copied it back to my Macbook. When I tried to launch it in VMWare, I got an error message: No permission to access this virtual machine. Configuration file: /Users/craig/WinXP Clean + Scanner.vmwarevm/WinXP Pro Test.vmx The permissions look fine to me: The bundle directory is 777 The bundle files (including the listed .vmx) are all 666 User is craig (my current user); group is staff. I changed the group to wheel at the suggestion of this page, but that didn't help. Finder shows read & write for craig, staff, and everyone on the bundle directory The bundle dir is also not locked Finder also shows rw and unlocked for the .vmx file The parent directory is also rw & unlocked Disk Utility permissions check doesn't show any problems with any of the associated files It sure looks like I should have wide open access to run this VM; why is Fusion complaining?

    Read the article

  • Outbound HTTP performance tuning recommendations

    - by Richard Gadsden
    I'll detail my exact setup below, but general recommendations for a better web-browsing experience will be useful. A nice checklist of things to try would be great! I have 600 users on a single site with an 8MB leased line. I get a lot of moans about the performance of "the internet" (ie web-browsing). What recommendations do the community have for speeding things up without just throwing more bandwidth at it? I expect I will end up buying some more, but good management tips are always valuable. My setup is this: Cisco PIX (515E) firewall on the edge of the network. It's just doing some basic NAT, and opening up a handful of ports to various bastion hosts (aka DMZ servers). The DMZ is just a switch that the servers are plugged into. ISA 2006 Enterprise array (two servers) connecting DMZ to the internal LAN, with WebSense Web Security filtering HTTP traffic so users can't look at porn or waste bandwidth on YouTube during working hours. I've done a few things - I've just switched my internal DNS over to use root hints, which halved DNS query latency from 500ms to 250ms. Well worth doing. I'm trying to cache more aggressively, but so much more of the internet is AJAXy and doesn't cache very well as compared to five years ago. Plus the 70GB of cache which felt like a lot a few years ago really isn't any more. I'm getting about 45% cache hits by number of requests, but only about 22% by size, ie larger objects are less likely to be cached. Latency seems to be part of the problem. Is that attributable to the bandwidth problem, or are there things I can look at to try to reduce latency even on heavily-loaded bandwidth?

    Read the article

  • Reloading NAT configuration on a running VMWare Server 2.0.2

    - by Jonathan Clarke
    I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

    Read the article

  • Sticky connection and HTTPS support for HAProxy

    - by Saif
    We have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 apache nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file. global # to have these messages end up in /var/log/haproxy.log you will # need to: # # 1) configure syslog to accept network log events. This is done # by adding the '-r' option to the SYSLOGD_OPTIONS in # /etc/sysconfig/syslog # # 2) configure local2 events to go to the /var/log/haproxy.log # file. A line like the following can be added to # /etc/sysconfig/syslog # # local2.* /var/log/haproxy.log # log 127.0.0.1 local0 log 127.0.0.1 local1 notice chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon # turn on stats unix socket stats socket /var/lib/haproxy/stats #--------------------------------------------------------------------- # common defaults that all the 'listen' and 'backend' sections will # use if not designated in their block #--------------------------------------------------------------------- defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 #--------------------------------------------------------------------- # main frontend which proxys to the backends #--------------------------------------------------------------------- frontend main *:5000 acl url_static path_beg -i /static /images /javascript /stylesheets acl url_static path_end -i .jpg .gif .png .css .js use_backend static if url_static default_backend app #--------------------------------------------------------------------- # static backend for serving up images, stylesheets and such #--------------------------------------------------------------------- backend static balance roundrobin server static 127.0.0.1:4331 check #--------------------------------------------------------------------- # round robin balancing between the various backends #--------------------------------------------------------------------- backend app listen ha-http 10.190.1.28:80 mode http stats enable stats auth admin:xxxxxx balance roundrobin cookie JSESSIONID prefix option httpclose option forwardfor option httpchk HEAD /haproxy.txt HTTP/1.0 server apache1 portal-04:80 cookie A check server apache2 im-01:80 cookie B check server apache3 im-02:80 cookie B check server apache4 im-03:80 cookie B check Please advice. Thanks for your help in advance.

    Read the article

  • Not Able To Connect to Windows Server 2008 R2 using FileZilla Externally

    - by obautista
    I configured FTP Service/Role on my Windows Server 2008 R2 machine. I am able to connect from the inside, but not from the outside. On the inside I tested using cmd prompt and IE FTP. On the outside, I am testing with FileZilla and IE FTP. From the outside, IE FTP prompts me to enter my username/pwd, but nothing happens. Page eventually times out and I get "Internet Explorer cannot display page". Using FileZilla, I get the following messages. Note FileZilla resolved domain name and authenticates. I did not configure FTP Wirewall Support on the FTP site. I am not sure if I need to do this. I set up basic authentication, non-ssl, not allowing anonymous. I testing with Windows Firewall Turned off and on (I added windows firewall rule for port 21). On my network firewall (Cisco), I added a rule to forward port 21 traffic to FTP Server. Status: Resolving address of ftp.technologyblends.com Status: Connecting to 75.149.66.201:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER * Response: 331 Password required for . Command: PASS *** Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing

    Read the article

  • Bind9 DNS help with psuedo domains

    - by Tempname
    I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

    Read the article

  • Azure can't ping or telnet VM from client

    - by Raif
    I have a VM on Azure with an instance sqlserver 2012 running on it. From my work computer and my home computer I can't get sqlserver management studio connect to it. I have looked at ALL the settings recommended in numerous articles. everything is setup correctly. endpoint 1433 Private and public sqlserver tcp enabled. sqlserver tcp listening on right port sqlserver using mixed auth windows fire wall, holes poked and then disabled on both client and VM can log in from VM using the credentials that I'm trying to use remotely further more I can't ping the dns or ip or tellnet address from my local machines. I can however hit the iis from a browser using the ip. strange. CS asked me to download MS Network Monitor, which I did and pinged and telneted. I have the results saved but can't really make heads or tails of them. CS hasn't responded yet. I can post some info here that would help. EDIT Never one to shrink from a challenge, I deleted my VM and re-did everything. Now it works although my confidence azure is somewhat shaken.

    Read the article

  • Windows 7 BSOD with Service Exception Error and Randomly Reboots

    - by Jason Shultz
    I've got a windows 7 laptop that BSOD with a Service Exception Error when I connect to a wireless network. It also does it when it's just sitting still doing nothing. I ran bluescreenview and here are the last four BSOD's from today: ================================================== Dump File : 051210-18642-01.dmp Crash Time : 5/12/2010 8:36:14 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06fda160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-18642-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-16551-01.dmp Crash Time : 5/12/2010 8:41:04 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`06f40160 Parameter 4 : 00000000`00000000 Caused By Driver : ntoskrnl.exe Caused By Address : ntoskrnl.exe+70600 File Description : NT Kernel & System Product Name : Microsoft® Windows® Operating System Company : Microsoft Corporation File Version : 6.1.7600.16539 (win7_gdr.100226-1909) Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-16551-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-17269-01.dmp Crash Time : 5/12/2010 8:45:51 AM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`07db1160 Parameter 4 : 00000000`00000000 Caused By Driver : Ntfs.sys Caused By Address : Ntfs.sys+7f030 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-17269-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== ================================================== Dump File : 051210-19453-01.dmp Crash Time : 5/12/2010 5:46:25 PM Bug Check String : SYSTEM_SERVICE_EXCEPTION Bug Check Code : 0x0000003b Parameter 1 : 00000000`c000001d Parameter 2 : fffff880`00000000 Parameter 3 : fffff880`02625160 Parameter 4 : 00000000`00000000 Caused By Driver : win32k.sys Caused By Address : win32k.sys+2d4201 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\Minidump\051210-19453-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ==================================================  

    Read the article

  • What's the risk of running a Domain Controller so that it is accessible from the internet?

    - by Adrian Grigore
    I have three remote dedicated web servers at different webhosts. Adding them to a common domain would make a lot of administration tasks much easier. Since two of the servers are running Windows 2008 R2 Standard, I thought about promoting them to Domain Controllers in order to set up the windows domain. There's another thread at Serverfault that recommends this. At the same time I've read a lot of times on different websites that this is not a good idea because an domain controller should always be behind a firewall LAN. But I can't set up something like this because I don't have a LAN with a static IP accessible from the internet. In fact I don't even have a windows server in my LAN. What I have not found out is why exposing a DC to the Internet would be bad idea. The only risk I can see is that if someone penetrates one of my webservers, it should be much easier to penetrate the others as well. But as far as I can see that's the worst case scenario since I am only going my web servers to that domain, not any computers from my local network. Is this the only downside or does it also make it easier to penetrate one of my web servers in the first place? Thanks, Adrian

    Read the article

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Why does my Belkin wireless router has eMule port open?

    - by Jeremy Powell
    I have a Belkin F6D4230-4 v1 router. When I port scan it with nmap I get the following: $ sudo nmap -sS -A -T5 192.168.2.1 -p- Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-17 11:40 CDT Interesting ports on 192.168.2.1: Not shown: 65532 closed ports PORT STATE SERVICE VERSION 80/tcp open http Belkin 2307 wifi router http config (IP_SHARER httpd 1.0) |_ html-title: '+i1+' 4661/tcp filtered unknown 4662/tcp filtered edonkey MAC Address: 00:22:75:5D:52:D8 (Belkin International) Device type: WAP|broadband router|firewall|printer|specialized|webcam Running (JUST GUESSING) : Linksys embedded (95%), TRENDnet embedded (95%), Netgear embedded (92%), Canon embedded (89%), On Time RTOS (89%), Symantec embedded (89%), D-Link embedded (86%), Polycom embedded (85%) Aggressive OS guesses: Linksys WRT54GC or TRENDnet TEW-431BRP wireless broadband router (95%), TRENDnet TW100-BRF114 broadband router (95%), Netgear FR114P ProSafe VPN firewall (92%), Canon PIXMA MX850 printer (89%), On Time RTOS (89%), Symantec Firewall/VPN 100 (89%), D-Link DI-714P+ wireless broadband router (86%), Polycom ViewStation video conferencing system (85%) No exact OS matches for host (test conditions non-ideal). Network Distance: 1 hop Service Info: Device: WAP OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 21.57 seconds Why are the 4461 and 4462 ports open? This is a basic, out-of-the-box installation.

    Read the article

  • MAC addresses on dual-NIC mainboards

    - by Tom O'Connor
    Here's a weird problem. We've got a number of devices with dual-NIC mainboards. Some are Realtek NICs, which suck. Some are Intel e1000s, which don't. I've just noticed on 2 machines, one is an Intel NIC, one is a Realtek, that when I put the MAC address of one machine into the dhcpd.conf file on our DHCP server to get it to PXE boot the machine into a rebuild environment, initially everything is fine. The server gets a DHCP allocation, and PXE boots into the Ubuntu preseed enviroment. On one or two machines, it gets as far as Ubuntu's DHCP network configuration, and fails. If i pull up a busybox shell (on tty2 on the installing machine), and run ip link, I can see that the UP flag is set on the other NIC. Here's some stuff. host xeon16-ghz240-gb48-node1 { hardware ethernet BC:AE:C5:07:1F:18; filename "pxelinux.0"; next-server 192.168.123.80; } That's what's in dhcpd.conf This is what ip link on the evil machine looks like. Only one NIC is actually connected (deliberately). As you can see, the NIC that's in the dhcpd config, is not marked as UP, and the link that is UP, isn't the one in DHCP. So far I've seen this on two brands of dual-NIC configuration. Does anyone know 1) what's causing it, and b) What we can do about it?

    Read the article

  • Firebird 2.5 Database Corrupt

    - by BrendanH
    We have an issue where a database hangs the server when: a backup is performed (Hangs on a specific table) selecting * or count(1) from a specific table or viewing data that is related to the table (FKs, etc) We could browse the table to a certain point (using IBExpert) however after about 2900 records the machine just spikes and hangs. Performing a gfix -m does not work, and the validation reports back Record level errors = 4 (no matter how many times we run gfix -m, -v, etc. The Firebird.log file reports back these types of messages: Relation has 91631 orphan backversions (9214273 in use) in table BINS (137) - {Which is apparently just a warning} Unable to complete network request to host "MHPLZA1". Error reading data from the connection. INET/inet_error: read errno = 10054 SERVER/process_packet: broken port, server exiting Shutting down the server with 1 active connection(s) to 1 database(s), 0 active service(s) - {If we leave the backup to run while hanging, it eventually logs this error message} The setup is: The table is question has about 7000 records. The Firebird version is 2.5 Classic Server x64 install. The OS is Windows Server 2008. This is a virtual machine (VMWare) running on a massive server. (Does anyone have issues with VMs and Firebird?). We have the same setup running fine on other servers (However they are not virtual machines). Is there anyway to pin point the issue and or the cause?

    Read the article

  • WebDAV through Apache2 permissions/missing files

    - by Strifariz
    I have a WebDAV setup on Apache2 on a server running Debian 5.0 (Lenny), which I am accessing through a mapped network drive under Windows 7. The setup appears to run fine, I receive no permission errors when copying a file to the share the first time, but the file never shows up in the directory (it's invisible, doing a ls -lha on the directory as root on the server also shows no files. When attempting to copy the file once more I am informed that the file already exists though, and I am asked if I wish to overwrite the file, when selecting "Yes" to this, I receive a permission error saying I'm not able to write to the folder. My logs aren't reporting any access violations of any kind, what could be the problem? (See log excerpt below) [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 201 304 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "LOCK /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "LOCK /1.png HTTP/1.1" 200 447 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PROPPATCH /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PROPPATCH /1.png HTTP/1.1" 207 389 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "HEAD /1.png HTTP/1.1" 401 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "HEAD /1.png HTTP/1.1" 200 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:34 +0100] "PUT /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PUT /1.png HTTP/1.1" 204 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PROPPATCH /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "PROPPATCH /1.png HTTP/1.1" 207 389 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "UNLOCK /1.png HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:35 +0100] "UNLOCK /1.png HTTP/1.1" 204 - "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:38 +0100] "PROPFIND / HTTP/1.1" 401 525 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600" [17/Jan/2011:10:26:38 +0100] "PROPFIND / HTTP/1.1" 207 1634 "-" "Microsoft-WebDAV-MiniRedir/6.1.7600"

    Read the article

  • Vmware Player 3.0 - cannot ping 32 bits guest from 64 bits (guest or host)

    - by npmj
    I'm stuck with what seems a bug in VmWare Player (build 203739). I'm using W7 Ultimate 64bits as host and have a CentOS 5.4 (64 bits) as a guest and a Windows XP Professional SP3 (32 bits) as another guest. From the 64 bits machines (the host and the linux guest) I cannot ping the windows XP. Off course, I already turned off the windows firewall in the guest and also in the host. The network is pretty basic, I'm using Vmnet8 (NAT), with DHCP and port forwarding (to the windows XP's IP). Everything is working ok, I have internet access from host and from both guests. Port forwarding to the XP guest is working ok too. The only problem is that I cannot access the XP guest through the Vmnet8. I monitored the traffic using wireshark (in the host and in the windows guest). If I try to ping the XP guest from the host, what I see is the ARP request leaving the host, being answered by the guest and, after that, there is no echo request leaving the host. The same occurs if I try to ping the XP from the CentOs guest. From the windows XP guest I can ping both the host and the CentOs guest. From the XP guest I can access the host shares. Obviously, from the host I cannot see the XP shares (as I cannot even ping the guest). I want to maintain this setup (using NAT to share the host's internet connection). Any suggestions?

    Read the article

< Previous Page | 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081  | Next Page >