Search Results

Search found 18713 results on 749 pages for 'suggestions wanted'.

Page 109/749 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

  • Design Patterns: Should I learn them?

    - by prelic
    So it's kinda weird asking two questions back-to-back, but they aren't very related and I didn't want to combine them, but I'm not spamming questions, I promise! Anyway, I'm a recent college grad, and my education only touched on design patterns...we implemented a few simple ones, touched on the fact that there were more complicated ones, and were instructed to turn to the GoF book if we wanted to learn more. My question is, is it worth learning the patterns in the GoF book? To me, it's always seemed counter-intuitive to try and make a problem fit a classic pattern, but obviously the book, and the patterns, are famous for a reason. Do they show up enough that I should be learning them? Thanks again!

    Read the article

  • How do I reset proxy in terminal to automatic if not connected via proxy

    - by therealnube
    Well,all I ever wanted was to download and install an application from the terminal. And to my surprise I just can't I tried to reset proxy of the terminal by some commands but it doesn't happen and automatically switches back to this proxy 172.16.0.16 (which apparently was my college proxy). I checked in my system settings too.. I don't understand why this is recurring. Please be comprehensive,I am a nube :) Also I further would like to know how to bypass proxy server since I couldn't access any of the repositories as they were blocked in my college's proxy settings as is Ubuntu's homepage. Thanks for your time. For sudo ls /etc/apt/apt.conf.d/ it displays a different set of options where proxy is not listed.I am on 12.10,if this should help any.I put a snap of the terminal after the above command has been entered.

    Read the article

  • iPhone site optimization: Custom viewport size

    - by Brandon Durham
    I've got a site that should max out a 575px on the iphone and wanted to know what the best method is for defaulting the viewport to this size. Currently I am using this meta tag: <meta name="viewport" content="width=575; user-scalable=no;"> This displays some odd behavior in that it loads fully zoomed out and then, once the page is loaded, zooms in to 575. What are the best methods to ensure that my site will surely display at 575px wide in mobile browsers?

    Read the article

  • Any good, easy to learn from books or tutorials for learning assembly? [on hold]

    - by pythonian29033
    I've been a developer since 2009 and I've learnt a lot of languages since, but I've always wanted to understand and be able to code in the lowest level language so I can directly (or at least very close to directly) speak to machines through my code. There was a point in time when someone showed me how to do an if statement in assembly, but out of all the books that I got, I could never really understand where/how to start learning to code in assembler. any help please? I'm obsessed with learning this! PS: if you have any software suggestions, I use ubuntu and am looking to convert to backtrack soon, so it would be preferred if you could give me something that'll be easily installed on debian linux, otherwise don't sweat it, give me the name of the windows software and I'll find an equivalent myself

    Read the article

  • Geometry Shader input vertices order

    - by NPS
    MSDN specifies (link) that when using triangleadj type of input to the GS, it should provide me with 6 vertices in specific order: 1st vertex of the triangle processed, vertex of an adjacent triangle, 2nd vertex of the triangle processed, another vertex of an adjacent triangle and so on... So if I wanted to create a pass-through shader (i.e. output the same triangle I got on input and nothing else) I should return vertices 0, 2 and 4. Is that correct? Well, apparently it isn't because I did just that and when I ran my app the vertices were flickering (like changing positions/disappearing/showing again or sth like that). But when I instead output vertices 0, 1 and 2 the app rendered the mesh correctly. I could provide some code but it seems like the problem is in the input vertices order, not the code itself. So what order do input vertices to the GS come in?

    Read the article

  • What are some good Photo and Artwork APIs?

    - by Ryan T
    We had an idea for starting a ecards service and were looking into the possibility of populating our site using photo/artwork APIs. Due to legal reasons, Flikr probably won't work, although I've started to scour the web for other options. Basically we just need two functions the user should be able to browse the site's collection and choose a picture we should be able to recall and render a specific picture on our site. From there we should have no problem building our application. The main obstacle is that we're lacking content at the moment. I haven't been able to find too many examples of this being done, so I was wondering if anyone here might know people who have done something similar to what we're trying to do, or know of any leads that might be able to help us out. Suggestions for other APIs that are out there, or forums/communities that might be able to point us in the right direction are also welcome.

    Read the article

  • How can a student programmer improve his teamwork skill?

    - by xiao
    I am a student right now. Recently, I am working in a project as a leader with three other students. Due to the lack of experience, our project is progressing slowly and our members are frustrated. They do not feel sense of accomplishment in the project. I am pressured and frustrated, too. But as a team leader, I think I need to push them. But I do not know how to do. Do I help them solve coding problem or just encouragement? But if I pay too much attention on it, it would slow down my own progress. It is a not technical question, but it is very common in software development. I hope veteran programmers would give me some suggestions. Thanks!

    Read the article

  • Resources for understanding iOS architecture [closed]

    - by BlackJack
    I recently finished reading Randall Hyde's excellent book Write Great Code: Volume 1: Understanding the Machine, and I have a much better knowledge of what's going on under the hood now. I want to start making iPhone apps, and there are lots of guides for that. Embracing my inner Hyde, however, I want to first learn about the iOS system architecture. Apple has a really good overview here: iOS Technology Overview Before I start, I wanted to know if there were any other good resources for understanding iOS architecture and using that knowledge for iPhone programming. Thanks.

    Read the article

  • Will having many timers affect my game performance?

    - by iQue
    I'm making a game for android, and earlier today I was trying to add some cool stuff to my game. The problem is this thing needs like 5 timers. I build my timers like this: timer += deltaTime; if(timer >= 2.0f){ doStuff; timer -= 2.0f; } // this timers gets stuff done every 2 secs Will having to many timers like this, getting checked every frame, screw up my games performance? The effect I wanted to add was a crosshair every 2 sec, then remove it after 2 sec and do a timed animation. So an array of crosshairs dependent on a bunch of timers to be exact. This caused my game to shut down when used, so thats why Im wondering if using that many timers causes my game to flip out.

    Read the article

  • Why do operating systems do low level stuff in C and C++? Why not just C++?

    - by Cole Johnson
    On the Wikipedia page for Windows, it states the Windows is written in Assembly for the bootloader and task switcher, and C and C++ for kernel routines. This confuses me because AFAIK, you can call C++ functions from an extern "C"'d block as C++ is just C with extra features (all of which can be rewritten in C if you wanted to AFAIK). I can get using C for the kernel functions so pure C apps can use them (like printf and such), but if they can just be wrapped in an extern "C " block, then why code in C? So my question is: Why would a kernel be written in both C and C++ instead of just C++

    Read the article

  • Importing Debian Bugs to Launchpad

    - by noddy
    While reading about how the bugs from debian are imported to launchpad, I came across a blueprint https://blueprints.launchpad.net/launchpad/+spec/debian-bug-import which was used initially to import bugs from debian. I cannot find the script that was used to import them or the logic that was used. Did the people import all the bugs from debian or did they filter the bugs. And how are the bugs presently imported from debian to launchpad. I came across a script in launchpad which imports bugs from debian given certain bug numbers but I wanted to know whether there is some automation that exists for importing relevant debian bugs to launchpad. Thanks.

    Read the article

  • The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

    - by david.talamelli
    [Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

    Read the article

  • How to remove desktop environments?

    - by MyNameIs...
    I installed few environments that I wanted to try out on Ubuntu 12.04, but none of them worked at all. It could be that I installed them all at the same time, meaning the OS didn't get a chance to work everything out, but either way, they didn't work. I would now like to remove them. The one's that I installed are Fluxbox, OpenBox, XFCE, and MATE. I installed them through the help of this site. Everything seemed to have been working properly until I actually tried to use the shells and nothing loaded at all. Except for Fluxbox, I think that one worked. I want to know of any way to repair or perhaps just remove the packages entirely. I might have already removed them because I did the apt-get remove command on all of them, but they were still in the list on the login screen.

    Read the article

  • FFmpeg not recording audio during screen capture

    - by King
    I'm using the script below to run FFmpeg on Ubuntu 10.10. I followed these instructions to install FFmpeg & x264. While ffmpeg does capture the screen it does not capture the mic audio. I've checked that the mic works via "System Preferences". Anyone have any ideas on what the problem(s) could be and suggestions on how to resolve this issue? Thanks. ffmpeg -f alsa -ac 2 -i hw:0,0 -f x11grab -r 30 -s $(xwininfo -root | grep 'geometry' | awk '{print $2;}') -i :0.0 -acodec pcm_s16le -vcodec libx264 -vpre lossless_ultrafast -threads 0 -y screen-capture.mkv

    Read the article

  • Software Management Tools for Agile Process Development

    - by Graviton
    We would like to implement the Agile/ Scrum process in our daily software management, so as to provide better progress visibility and feature managements, here are some of the activities that we want to do: Daily stand-up Release cycles of 6 weeks with 3 2-week iterations. Having a product back-log of tasks (integrate with bugzilla) and bugs estimated out. Printing a daily burn down to make velocity visible. When used as motivator, it's great. Easy feature development tracking and full blown visibility, especially for the sales and stake holders ( this means that it must be a web based tool). My team is distributed, so physical whiteboards aren't feasible. Is there such a web based tool that meets our needs? I heard icescrum may be one, but I've never used it so I don't know. There are a few more suggestions as here, but I've never heard of them, anyone cares to elaborate or suggest new tools?

    Read the article

  • How to correct Google Earth's "invalid HTTP request" notice?

    - by Hejar Mukriyani
    I am running Ubuntu 12.04. As you might know Google Earth 7 doesn't work in Ubuntu 12.04 yet. I installed Google Earth via make-googleearth-package --force command. My installation was saccesful. At the beginning everything was working fine. But after some days I had a problem. When I type in "Fly to" box a city I wanted to search for it. It gives me "invalid HTTP request" error as seen in the picture: How to solve? P.S: I removed and reinstalled it but problem still consists. I can search globe via mouse only.

    Read the article

  • font showing up as squares during installation

    - by EmileBeaulieu
    I am very new to linux, just so you know. I chose ubuntu as my first linux distro. I created a boot flash drive and installed it on to my little netbook. It works fine, and I'm having fun playing around with it. Now I wanted to install it on my main computer, however after inserting the flash drive and rebooting, and after the initial startup screen, the first screen that comes up has ALL the text showing up as little squares! If I remember correctly from when I installed it on the netbook, it's asking me what language I want on this screen. Why would this happen on my main computer and not on the little netbook, when I used the exact same flash drive and installation? I have a screenshot, but since I'm new here, it won't let me post it.

    Read the article

  • Adding a DLL to the GAC in Windows 7

    - by Jim Giercyk
    I recently created a DLL and I wanted to reference it from a project I was developing in Visual Studio.  In previous versions of Windows, doing so was simply a matter of dropping the DLL file in the C:\Windows\assembly folder.  That would add the DLL to the Global Assembly Cache (GAC) and make it accessible in Visual Studio.  However, as is often the case, Window 7 is different.  Even if you have Administrator privileges on your machine, you still do not have permission to drop a file in the assembly folder.  Undaunted, I thought about using the old DOS command line utility gacutil.exe.  Microsoft developed the tool as part of the .Net framework, and it is available in the Windows SDK Framework Tools.  If you have never used gacutil.exe before, you can find out everything you ever wanted to know but were afraid to ask here: http://msdn.microsoft.com/en-us/library/ex0ss12c(v=vs.80).aspx .  Unfortunately, if you do not have the Windows SDK loaded on your development machine, you will need to install it to use gacutil, but it is relatively quick and painless, and the framework tools are very useful.  Look here for your latest SDK: http://www.microsoft.com/download/en/search.aspx?q=Windows%20SDK .   After installing the SDK, I tried installing my DLL to the GAC by running gacutil from a DOS command line: That’s odd.  Microsoft is shipping a tool that cannot be executed even with Administrator rights?  Let me stop here and say that I am by no means a Windows security expert, so I actually did contact my system administrators, and they were not sure how to fix the problem….there must be a super administrator access level, but it isn’t available to your average developer in my company.  The solution outlined here is working within the boundaries of a normal windows Administrator. So, now the hacker in me bubbles to the surface.  What if I were to create a simple BAT file containing the gacutil command?  It’s so crazy it just might work!  Ugh!  I was starting to think this would never work, but then I realized that simply executing a batch program did not change my level of access.  Typically in Windows 7, you would select the “Run As Administrator” option to temporarily act as an administrator for the purpose of executing a process.  However, that option is not available for BAT files run from the command line.  SOLUTION: Create a desktop shortcut to execute the BAT file, which in turn will execute the line command…..are you still with me?  I created a shortcut and pointed it to my batch file.  Theoretically, all I need to do now is right-click on the shortcut and select “Run As Administrator” and we’re good, right?  Well, kinda.  If you notice the syntax of my BAT file, the name of the DLL is passed in as a parameter.  Therefore, I either have to hard-code the file name in the BAT program (YUCK!!), or I can leave the parameter and drag the DLL file to the shortcut and drop it.  Sweet, drag-and-drop works for me…..but if I use the drag-and-drop method, there is no way for me to right-click and select “Run As Administrator”.  That is not a problem…..I simply have to adjust the properties of the shortcut I created and I am in business.  I Right-clicked on the shortcut and select “Properties”.  Under the “Shortcut” tab there is an “Advanced” button…..I clicked it. All I needed to do was check the “Run As Administrator” box: In summary, what I have done is create a BAT file to execute a command line utility, gacutil.exe.  Then, rather than executing the BAT file from the command line, I created a desktop shortcut to run it and set the shortcut properties to “Run As Administrator”.  This will effectively mean I am executing the command line utility with Administrator privileges.  Pretty sneaky. Now, when I drag the DLL file  over to the shortcut, it starts the BAT file and adds the DLL to the assembly cache.  I created another BAT file to remove a DLL from the GAC in case the need should arise.  The code for that is: Give it a try.  I can’t imagine why updating the GAC has been made into such a chore in Windows 7.  Hopefully there is a service pack in the works that will give developers the functionality they had in Windows XP, but in the meantime, this workaround is extremely useful.

    Read the article

  • Bitbucket and a small development house

    - by Marlon
    I am in the process of finally rolling Mercurial as our version control system at work. This is a huge deal for everyone as, shockingly, they have never used a VCS. After months of putting the bug in management's ears, they finally saw the light and now realise how much better it is than working with a network of shared folders! In the process of rolling this out, I am thinking of different strategies to manage our stuff and I am leaning towards using Bitbucket as our "central" repository. The projects in Bitbucket will solely be private projects and everyone will push and pull from there. I am open to different suggestions, but has anyone got a similar setup? If so, what caveats have you encountered?

    Read the article

  • Web Hosting Backup/Disaster Recovery Plan - Which Company?

    - by Harry Muscle
    I've been asked to look after consolidating all of our various company websites onto one host and also provide a disaster recover plan in case the chosen host goes down/out of business/etc. We're most likely going to go with HostGator as our chosen host, however, I'm not sure who to pick for our backup host. HostGator uses cPanel and has the functionality to provide regular full (ie: including configuration) backups of all the sites we host. Ideally I'm looking for a solution where we can provide these backups to another company and within a short period of time they restore all the sites onto their servers and we're back up and running. The whole disaster recover process has to be fairly straight forward from the point of view of what we need to do in case I am unavailable to assist in the disaster recovery process and no one else overly technical is available to assist (ie: take these backup files, send them to this company, and ask them to do this). Any suggestions on which company would be a good choice for this backup solution would be highly appreciated. Thanks, Harry

    Read the article

  • Ho do I install Ubuntu on my Mac PowerPC G5

    - by Matt
    How do I install Ubuntu on my powerpc G5? which version do I download? where do I download it from? and how do I get it to install? I tried burning ubuntu powerpc 12.04 and booting from the cd and all I get is a DOS like setup prompt "boot:" I've tried 'live' and everything else listed when I push tab; but, every time I get a bunch of white text on black screen, then black text on white and then my monitor just goes black and nothing happens??? what am I doing wrong? any suggestions?

    Read the article

  • R vs Python for data analysis

    - by The_Cthulhu_Kid
    I have been programming for about a year and I am really interested in data analysis and machine learning. I am taking part in a couple of online courses and am reading a couple of books. Everything I am doing uses either R or Python and I am looking for suggestions on whether or not I should concentrate on one language (and if so which) or carry on with both; do they complement each other? -- I should mention that I use C# in school but am familiar with Python through self-study.

    Read the article

  • SQL Interview Preparation : QA Engineer Position

    - by user9009
    Hello, I have interview with enterprise company for QA Engineer(New Grad-Mid level experience) position. I was told i would expect some questions on SQL. The company is eCommerce shopping portal. So what kind of questions do i expect for SQL coding ? . DO i need to learn how to code complex queries? Any inputs would be appreciated. Please provide links which you think can be helpful. Yes i found similar question on StackOverflow, but i wanted to know important SQL topics from QA Engineer Perspective Thanks

    Read the article

  • What are the benefits of designing a KeyBinding relay?

    - by Adam Naylor
    The input system of Quake3 is handled using a Keybinding relay, whereby each keypress is matched against a 'binding' which is then passed to the CLI along with a time stamp of when the keypress (or release) occurred. I just wanted to get an idea from developers what they considered to be the key benefits of designing your input system around this approach? One thing i don't particularly like is the appending of the timestamp to the bound command. This seems like a bit of a hack to bend the CLI into handling the games input? Also I feel that detecting the keypress only to add the command to a stream of text that gets parsed at a later date to be a slightly latent way of responding to input? (or is this unfounded?) The only real benefit i can see is that it allows you to bind 'complex' commands to keypresses; like 'switch weapon;+fire;' for example. Or maybe for journaling purposes? Thanks for any insights!

    Read the article

  • Virtualising Windows 8 on OS X with VMware Fusion above the 8GB limit

    - by mbrit
    tl;dr - don't.VMware Fusion has an 8GB limit, so on my 16GB MacBook Pro (which is an old one with a 16GB memory upgrade), I wanted to use more than 8GB. You can fudge it my editing the .vmx file and changing the memsize value to whatever you want.However it turns out that if you do this the performance on the whole machine turns into a big. It beachballs all over the place, both in VMware and without. Constant hanging of VMware, fan running hot the whole time, etc.This is just an apocryphal view, but having spent a week and a half with it unusable and me thinking I was going to have to go back to Win7, turn it down back to using 8GB exactly seems to be working much more stably.

    Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >