Search Results

Search found 4846 results on 194 pages for 'vertical sync'.

Page 109/194 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Linux Software Raid runs checkarray on the First Sunday of the Month? Why?

  - by mgjk

  It looks like Debian has a default to run checkarray on the first Sunday of the month. This causes massive performance problems and heavy disk usage for 12 hours on my 2TB mirror. Doing this "just in case" is bizzare to me. Discovering data out of sync between the two disks without quorum would be a failure anyway. This massive checking could only tell me that I have an unrecoverable drive failure and corrupt data. Which is nice, but not all that helpful. Is it necessary? Given I have no disk errors and no reason to believe my disks have failed, why is this check necessary? Should I take it out of my cron? /etc/cron.d# tail -1 /etc/cron.d/mdadm 57 0 * * 0 root [ -x /usr/share/mdadm/checkarray ] && [ $(date +\%d) -le 7 ] && /usr/share/mdadm/checkarray --cron --all --quiet Thanks for any insight,

  Read the article

• linux xorg dual different monitors mouse border

  - by Metiu

  If I hook an external monitor to my Linux laptop and configure it for dual head with the Gnome system tools, I do get them configured with the proper resolution and position (one to the left of the other) The mouse pointer, however, will apparently use the greatest of the two vertical resolutions. This way, when I move up to the top border, the mouse exits the visible screen, traveling in empty space, and this is quite annoying, because you can't go to the upper panel just by going up very fast. Is there a way of enforcing the right resolutions for the mouse, too? Thank you

  Read the article

• Is Joerg Schilling's "sdd" a full replacement for "dd"

  - by fishtoprecords

  I'm trying to use 'sdd' on my Debian system, and can't get one set of options to work. They do work in 'dd' so I am wondering if I am specifying them incorrectly, or if sdd didn't implement them, or something else. What I want to do is sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 conv=sync,noerror if I leave out the "conv=..." option, it works, or at least starts copying data. sdd if=/dev/hdh1 of=/bay5/imagebay1 bs=4096 Can you shed a bit of light?

  Read the article

• Poor quality when trying to stream a 720p video to XBox 360 using Media Center Extender

  - by MBraedley

  I have my XBox 360 set up as a Media Center Extender for my Windows 7 desktop. SD quality avi videos stream fine to my XBox, either though the video library or through Media Center Extender, but when I try a 720p mkv file, the frame rate plummets and the A/V sync is completely lost. I don't want to transcode or switch container formats (mkv isn't supported by the 360), but still want to stream. Both my desktop and 360 are plugged into the same gigabit switch, which is plugged into my ISP supplied modem/router. The video plays fine on my machine in a number of programs. Considering that I should have more than enough bandwidth to accommodate this video, why won't it play back properly?

  Read the article

• Dhcp server change fail after successful importing to new machine

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• Missing menu items for Azure SQL tables within SQL Server Management Studio?

  - by Sid

  I have a table (say Table1) that is replicated via SQL Data Sync Agent across a local SQL Server 2012 as well as an Azure SQL Server (part of Microsoft Azure). Everything about Table1 (schema, table values etc ) is identical to the best of my understanding. However, when I list and right click Table1 from Microsoft SQL Server Management Studio 2012 (SSMS), I get some very different menu options, even for seemingly basic stuff. Lets focus only on the 'Design' menu item: It is visible for Table1 on the local SQL server in SSMS It is missing for Table1 on Azure SQL via SSMS It is visible for Table1 (as Open Table Definition) on Azure SQL when reaching it via Visual Studio 2012 (Server Explorer - Data connections) This is seen in the screenshots below: Now I use scripts from some real stuff (esp when I need to check in the SQL scripts etc) but this difference concerns me to some extent. Am I witnessing just a tools artifact in SQL Server Management Studio when connecting to Azure SQL? or is it something more serious about limitations of Azure SQL itself (although, just seeing the Design surface is so basic!)?

  Read the article

• PhpMyAdmin Hangs On MySQL Error

  - by user75228

  I'm currently running PhpMyAdmin 4.0.10 (the latest version supporting PHP 4.2.X) on my Amazon EC2 connecting to a MySQL database on RDS. Everything works perfectly fine except actions that return a mysql error message. Whether I perform "any" kind of action that will return a mysql error, Phpmyadmin will hang with the yellow "Loading" box forever without displaying anything. For example, if I perform the following command in MySQL CLI : select * from 123; It instantly returns the following error : ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '123' at line 1 which is completely normal because table 123 doesn't exist. However, if I execute the exact same command in the "SQL" box in Phpmyadmin, after I click "Go" it'll display "Loading" and stops there forever. Has anyone ever encountered this kind of issue with Phpmyadmin? Is this a bug or I have something wrong with my config.inc.php? Any help would be much appreciated. I also noticed these error messages in my apache error logs : /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open /opt/apache/bin/httpd: symbol lookup error: /opt/php/lib/php/extensions/no-debug-non-zts-20060613/iconv.so: undefined symbol: libiconv_open Below are my config.inc.php settings : <?php /* vim: set expandtab sw=4 ts=4 sts=4: */ /** * phpMyAdmin sample configuration, you can use it as base for * manual configuration. For easier setup you can use setup/ * * All directives are explained in documentation in the doc/ folder * or at <http://docs.phpmyadmin.net/>. * * @package PhpMyAdmin */ /* * This is needed for cookie based authentication to encrypt password in * cookie */ $cfg['blowfish_secret'] = 'something_random'; /* YOU MUST FILL IN THIS FOR COOKIE AUTH! */ /* * Servers configuration */ $i = 0; /* * First server */ $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'cookie'; /* Server parameters */ $cfg['Servers'][$i]['host'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = true; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['LoginCookieValidity'] = '3600'; /* * phpMyAdmin configuration storage settings. */ /* User used to manipulate with storage */ $cfg['Servers'][$i]['controlhost'] = '*.rds.amazonaws.com'; $cfg['Servers'][$i]['controluser'] = 'pma'; $cfg['Servers'][$i]['controlpass'] = 'password'; /* Storage database and tables */ $cfg['Servers'][$i]['pmadb'] = 'phpmyadmin'; $cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark'; $cfg['Servers'][$i]['relation'] = 'pma__relation'; $cfg['Servers'][$i]['table_info'] = 'pma__table_info'; $cfg['Servers'][$i]['table_coords'] = 'pma__table_coords'; $cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages'; $cfg['Servers'][$i]['column_info'] = 'pma__column_info'; $cfg['Servers'][$i]['history'] = 'pma__history'; $cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs'; $cfg['Servers'][$i]['tracking'] = 'pma__tracking'; $cfg['Servers'][$i]['designer_coords'] = 'pma__designer_coords'; $cfg['Servers'][$i]['userconfig'] = 'pma__userconfig'; $cfg['Servers'][$i]['recent'] = 'pma__recent'; /* Contrib / Swekey authentication */ // $cfg['Servers'][$i]['auth_swekey_config'] = '/etc/swekey-pma.conf'; /* * End of servers configuration */ /* * Directories for saving/loading files from server */ $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; /** * Defines whether a user should be displayed a "show all (records)" * button in browse mode or not. * default = false */ //$cfg['ShowAll'] = true; /** * Number of rows displayed when browsing a result set. If the result * set contains more rows, "Previous" and "Next". * default = 30 */ $cfg['MaxRows'] = 50; /** * disallow editing of binary fields * valid values are: * false allow editing * 'blob' allow editing except for BLOB fields * 'noblob' disallow editing except for BLOB fields * 'all' disallow editing * default = blob */ //$cfg['ProtectBinary'] = 'false'; /** * Default language to use, if not browser-defined or user-defined * (you find all languages in the locale folder) * uncomment the desired line: * default = 'en' */ //$cfg['DefaultLang'] = 'en'; //$cfg['DefaultLang'] = 'de'; /** * default display direction (horizontal|vertical|horizontalflipped) */ //$cfg['DefaultDisplay'] = 'vertical'; /** * How many columns should be used for table display of a database? * (a value larger than 1 results in some information being hidden) * default = 1 */ //$cfg['PropertiesNumColumns'] = 2; /** * Set to true if you want DB-based query history.If false, this utilizes * JS-routines to display query history (lost by window close) * * This requires configuration storage enabled, see above. * default = false */ //$cfg['QueryHistoryDB'] = true; /** * When using DB-based query history, how many entries should be kept? * * default = 25 */ //$cfg['QueryHistoryMax'] = 100; /* * You can find more configuration options in the documentation * in the doc/ folder or at <http://docs.phpmyadmin.net/>. */ ?>

  Read the article

• How to play two or more videos side by side in a syncronized fashion in Linux?

  - by Grumbel

  I have two (or more) video files that I want to play side by side. I could do that simply by opening them in two seperate windows, but that would also seperate all the controls (play/pause/forward/...). I want to play them in a synchronized fashion so that pause/forwarding/... works on both videos simultaneously so that they always stay at the same timecode and they don't go out of sync. How would I accomplish that in Linux? This is needed for viewing only, so compositing them into a new video file first should be avoided if possible, but if there isn't an easy way to do that, I welcome answers doing it with composition as well.

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• ext4 loopback device, Buffer I/O Error on reboot

  - by cvb

  I am trying to mount a loopback device on my ext4 formatted ssd drive. I get these errors when I reboot on Linux kernel 2.6.38.8 Buffer I/O error on device loop1, logical block 0 Here is what I do: dd if=/dev/zero of=/mnt/s/lodev bs=4096 count=250000 mkfs.ext4 /mnt/s/lodev mount -n -o loop,rw /mnt/s/lodev /mnt/test The loopback mount is successful, but on reboot I get errors as mentioned above. Even mouting with 'sync','data=writeback' does not help. I tried to losetup a device, but see the same behavior. I also reformatted the base device and created the loopback device and mounted as above, I still see these errors. I do not see them when I format them as vfat. Appreciate any suggestions on this problem.

  Read the article

• Synckolab will not start automatically

  - by EBV2010

  We have a Kolab server for e-mail, calendar and contacts with Thunderbird for a client. The add-ons are Lightning and Synckolab. The workstations are Kubuntu, most 10.04, some 11.10. It basically works but for one nagging problem: the automatic sync (that is, the settings that starts Synckolab upon start of Thunderbird and every x minutes as per setting) does not fire. We went through the whole routine: setting it, setting it to zero and back to any number of minutes, stopping/starting Thunderbird or the entire computer to make sure it sees and sets it. In the configuration console is reflects the changes. But still it will not automatically fire Synckolab. Manual syncs work without any problem (none that we've seen - it reflects all the added, changed etc calendar events). In short: Synckolab does not fire automatically with any setting who have thought of.

  Read the article

• Backing up data (including mysqldumps) to S3

  - by seengee

  We have a web app on a number of servers and we want to add an additional layer of redundancy by backing up the key data to S3. The key data is the MySQL database and a folder containing dynamically created site assets - predominantly images. Some kind of rsync based solution would initially seem the best plan. A couple of years ago we played with S3cmd (in particular s3cmd sync) with some success but we didn't find it particularly reliable although this may have changed since. Its occurred to me though that a rsync solution might not work particularly well with a single db.sql file created with mysqldump and I assume this means the whole database getting transferred each time, with multiple databases of over 1GB this is going to add up to a lot of traffic (and $s) very quickly. With the image files I could simply just transfer files modified within the last day which would be far more simple. What approach should I look at?

  Read the article

• Dhcp clients fail after successful import of server to new machine (win2k3)

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• windows 2008 server move users to new server

  - by moos3

  I have a new server that is replacing a current windows 2008 server r2. I want to move all the local users and IIS sites to the new box. Is there away to export the two and import them on the new box? I have sync'd all the files for all the sites to the new box. This box doesn't belong to a domain so its not a matter of joining to the domain. The users I'm talking about are the local computer users.

  Read the article

• get a list of running ec2 instances programmatically

  - by user113981

  Hi i have started with aws and found out that we can get a list of running servers with the aws php sdk. Is there any other way to get the list of all ec2 instances? after getting the list i want to sync the data from one main instances to all the instances. Something like a button click can also do the operation. Are rsync, incron the only options, or it can be done by aws php sdk also. Please provide some tutorial links.

  Read the article

• Rsync over ssh with root access on both sides

  - by Tim Abell

  Hi, I have one older ubuntu server, and one newer debian server and I am migrating data from the old one to the new one. I want to use rsync to transfer data across to make final migration easier and quicker than the equivalent tar/scp/untar process. As an example, I want to sync the home folders one at a time to the new server. This requires root access at both ends as not all files at the source side are world readable and the destination has to be written with correct permissions into /home. I can't figure out how to give rsync root access on both sides. I've seen a few related questions, but none quite match what I'm trying to do. I have sudo set up and working on both servers.

  Read the article

• Please help to troubleshoot the issue with Inspiron 8600 laptop

  - by user34300

  Hello! I have a Dell Inspiron 8600 laptop which display stopped working all of the sudden. It started to show a purple fog pattern along with some color vertical lines. I talked to Dell support and they told me that is a screen gone bad and I should get a new one which I did. But surprisingly the new display won't work either! The pattern on the screen is different but still no picture. So I tried to connect the old display to another laptop (Lenovo Z61) and it turns out it works just fine with it! So please help me to identify the cause of the issue. I think it could be a video card but the external display works flawlessly. I appreciate your thoughts about it so I won't need to buy spares which I don't need. Thank you! P.S. Please do not suggest to contact Dell support again.

  Read the article

• virtual box strectch to fit resolution

  - by Scarface

  Hey guys I have a really annoying problem, that I hope someone has figured out. I just installed ubuntu on virtual box and installed the guest additions so everything was great. I had a resolution that stretched across my screen from left to right and the only virtual box components that were visible were the windows vista title bar : minimize/exit/maximize buttons and virtual box controls at the bottom. Now all of a sudden now that I have installed the ubuntu 170mb of automatic updates, I see vertical and horizontal scroll bars that are part of virtual box and the ubuntu resolution will not stretch across my screen anymore. What I want is a ubuntu resolution that will stretch to fit the maximized window of virtual box, and remove the scroll bars. If anyone has any ideas, I would really appreciate it.

  Read the article

• Microsoft Wireless Keyboard 3000 v2.0 not working, but paired Wireless Mouse 5000 on same receiver does?

  - by John Straka

  I have a Microsoft Wireless Keyboard 3000 v2.0 that was bought paired with a Microsoft Wireless Mouse 5000. They're both Bluetooth and use the same receiver. The keyboard no longer works. The receiver is fine, as the mouse still works. The keyboard is still detected by Windows when the receiver is plugged in. The batteries have been replaced. There are no on/off switches on the keyboard or mouse, and no re-sync button on them or the receiver. Results are the same when using the receiver in a different USB port, or on a different machine. Anything else I might try to fix this, or should I hold a funeral for the keyboard?

  Read the article

• Logitech Revue - tv picture extends too far off left/right side of tv?

  - by super user

  Hi, I got a logitech revue (for google tv). I hooked it up, works ok, but the picture is not fitting horizontally in my hdtv. The hdtv is a Sony Bravia, 2010 model. The tv picture is fitting vertically just fine, but it looks like the left and right ends of the picture extend way off farther than they should be. In other words, it looks like the picture is starting about 4 inches to the left of the left side of the tv, and extends 4 inches past the right edge of the tv. I know in menu - settings you have an option to "maximize" your picture, which works for the vertical directions, but the horizontal directions seem convinced that they're maximized properly and I cannot adjust. Any help here? Thanks

  Read the article

• Using iTunes within Terminal Services 2008 R2 - Pitfalls etc

  - by Kristiaan

  I was hoping to get some further information on any possible Do's and Don't when it comes to installing, using and maintaining iTunes within a Termina Server environment. We have come across a situation in our company whereby some of our users who are using thin clients now need the ability to sync, update and manage their devices, previously they used either standard desktop systems or laptops so there was no issue with running iTunes. I have not found much information on the web about using iTunes within a Terminal Server Farm, Id like to find out if iTunes works within the environment, any known or common issues that occur due to running it like this.

  Read the article

• VirtualBox guest not recognizing daylight savings transition

  - by user41421

  I want to test an app's behaviour during transitions in and out of daylight savings time. I therefore want to be able to set the date and time of a VirtualBox VM, (preferably from the Control Panel applet, but from a batch file is fine) and not have it "corrected" to the host's time for me. I have turned of Internet sync in the guest and that seems to have achieved this, so I wrote a couple of batch files to set the date to a value just prior to the time of transition in and out of daylight savings time. The VirtualBox guest doesn't seem to recognize the daylight savings changeover date - it just marches on past with no change of time, no message (yes - "Adjust clock for daylight savings" is enabled). Any ideas?

  Read the article

• %sessionname% returns incorrect session name

  - by Samuel Walker

  I have a virtualised Windows XP SP3 machine, which I am connecting to over Remote Desktop. One of my scripts needs to use the %sessionname% variable. However this returns incorrect information. C:\>%sessionname% constantly returns RDP-Tcp#5, instead of the value for the currently connected session (RDP-Tcp#35 or similar), as shown in Task Manager This causes my scripts to contain incorrect information. What can I do to resolve this? Edit Further Information: A restart appears to solve the problem for the first connection, but then subsequent connections have the numbers fall out of sync again.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

• How can I convert and repair MPEG-TS (DVB-S captures) for better playback?

  - by SofaKng

  I have a lot of MPEG-TS video files (H.264 video with AC3 or MP3 in a .TS container) captured from a DVB-S capture card. When I play these videos it's much slower to seek in the video (ie. skip 30 seconds, etc) than with other files. I'm not sure if the problem is the H.264 encoding (reference frame count?) or the MPEG-TS container, or if the MPEG-TS file contains sync errors, etc. Does anybody have a good workflow for converting and repairing these files?

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >