Search Results

Search found 13401 results on 537 pages for 'external monitor'.

Page 11/537 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• What happens if I pierce a TFT monitor?

  - by sharptooth

  What happens if I pierce a TFT monitor screen with something sharp (say a nail)? Will only the pierced region malfunction or the whole monitor screen? There's an opinion that in this case the entire screen will "flow out" (more specifically - "liquid crystals will flow out") and stop working completely. Is that truth or an urban legend?

  Read the article

• Solution to tack things up on top or to the side of a monitor

  - by Bela

  I'm trying to find some sort of product that would either go on the top or the side of an lcd monitor and give me space to tape/push-pin/post it note things for myself. For random notes and things I want to keep track of, having them on the top/side of my monitor would keep the space on my desk itself clear, and they would be closer to my field of vision. Does something like this exist? Do I need to rig up something myself?

  Read the article

• Configuring a monitor's contrast/brightess/colours/etc

  - by DMA57361

  I have recently bought myself a new monitor, now I'd had my previous screen well over 5 years now so I'm looking at this one thinking the picture doesn't quite look right (not bad, just different). Rather than just wait until I'm used to the new picture I'd rather get it fine tuned, then get used to it - so I can reap the maximum benefit. So, can you please suggest reliable ways of configuring an LCD monitor's brightness/contrast/colour/etc to provide the optimum possibly quality image?

  Read the article

• Not getting native resolution of external monitor in Ubuntu

  - by darthvader

  Since there us a defect in my laptop screen, I am using an external Dell 1600x1000 monitor. Windows was recognizing the native resolution correctly. But when I installed Ubuntu 10.10, I get only up to 1024x768 in the Monitor preferences. I had a look at this and tried to add resolution by running xrandr --addmode VGA 1600×1000 but I am getting the error xrandr: cannot find output "VGA" What is the way out.

  Read the article

• Monitor not displaing windows 7 correctly

  - by rdt

  I have just got a 15" Digimate TFT LCD monitor. I'm running Windows 7. Now the icons are too big, as are the windows in both browsers and word processing software - and everything has a bit to the left cut off, so for instance I can no longer see the back button in Chrome. I've tried looking at the resolution and adjusting the monitor settings, but no luck. I've also tried updating drivers, but can't find any compatible ones.

  Read the article

• How to dock a window to an inside edge of a dual-monitor setup

  - by Kevin M

  I have a dual monitor setup at work. I am running Windows 7 Ultimate, and I would like to take advantage of the docking feature, whereby you can drag a window to the side of the monitor and have it expand and fill to half the screen. Trouble is, I would like to drag it to the inside edge(adjoining the other screen) and it does not activate. How would I go about activating this for the inside edge?

  Read the article

• Configuring a monitor's constract/brightess/colours/etc

  - by DMA57361

  I have recently bought myself a new monitor, now I'd had my previous screen well over 5 years now so I'm looking at this one thinking the picture doesn't quite look right (not bad, just different). Rather than just wait until I'm used to the new picture I'd rather get it fine tuned, then get used to it - so I can reap the maximum benefit. So, can you please suggest reliable ways of configuring an LCD monitor's brightness/contrast/colour/etc to provide the optimum possibly quality image?

  Read the article

• Second portable monitor for a laptop

  - by user2630

  I'm away from my home office fairly regularly but I find it difficult to really settle to productive coding without my custom 4-screen custom built PC. My laptop (a slightly ageing HP Pavilion with a 1440 x 900 display) would really benefit from a portable monitor to plug into the vga port. Is there any suitable products out there which offer an easily luggable lightweight monitor which would fit in my laptop, offer reasonable resolution and response, and significantly enhance my screen real-estate?

  Read the article

• Laptop connected to external monitor results in desktop overflow

  - by Andrew Fox

  I have a laptop (MSi FX600) connected to an external monitor (Toshiba 19AV500U) with the screen resolution set to the monitors recommended setting of 1440x900. The problem is the desktop is overflowing the display, meaning all edges of the desktop are cut off, so I cannot see the close, minimize buttons on the top and I only see half of the taskbar at the bottom. I have tried many different resolutions but none of them solve the problem. I have had this same problem when connecting to other external monitors in the past, but not all of them, it seems to be fairly random. I have tried to find a way to manually adjust the resolution but I cannot see a way to do this in my settings. All windows updates are up to date, I am connecting through an HDMI cable and I have it set to display only on the external monitor and not extended desktop.

  Read the article

• Dual-monitor Windows XP, monitors are "identified wrong"

  - by Susan

  Trying to use a dual-monitor desktop system with Windows XP.... 1 graphics card... with digital/analog outputs. Picking: Desktop - Properties - Settings - Identify It shows "2" as my left monitor... and "1" as my right. How do I switch them around? Here's what I've tried so far: Switch the cables (I can't. I need the digital cable on the better monitor.) Switch the monitors (I can't. One has a few dead pixels.) Drag the 1+2 graphics around (That doesn't change the IDENTIFY numbers.) Pick "use as primary" or "extend" (That doesn't change the IDENTIFY numbers.) Anything else I can try? What exactly controls/switches the "IDENTIFY numbers" around? I know it can be done. For weeks I ran this exact set-up... with the CORRECT numbers appearing on the monitors.... then just recently... after a few reboots... they now appear "switched around".

  Read the article

• Third Monitor (Mini Display Port, Display Port)

  - by muhsing

  I have got a Hd 6950(2x minidisplay port 2x DVI port 1x HDMI port) graphic cards. And I have got a three monitor. I want to active it all. I learned to need an active minidisplay port to vga or minidisplay port to dvi cable. Here's my problem. I want to buy minidisplay port to dvi but my country doesn't have it but I can find display port to active dvi cable. I have a minidisplay port to display port cable. If I buy Sapphire ACTIVE DP TO SL-DVI CABLE will my third monitor work? I mean I will plug mini display port to display port cable first and after I will plug active dp to dvi cable. Will it work? If someone help me I will be very grateful. I have this And I will buy this After this processing Will my third monitor work with eyefinity? Sorry for my English. I hope you will understand me. Take care.

  Read the article

• Multiple Settings for One Monitor

  - by Lynda

  I have my monitor set to the way I like it, it shows colors accurately and not overly bright (white doesn't blind me). However I edit photos for the web and this is great for my screen but I have noticed when looking at other screens my photos will at times looked washed out and not a good presentation. If I manually change my monitor settings to be brighter (and a few other tweaks) I can replicate the look of other monitors close enough to help prevent washed out/blown out photos. Here is the issue, I need to be able to change settings between the two fairly easily. To manually set my monitor for one then back to the other can be time consuming and a pain to set right every time. I would like to be able to preset certain settings (in software) that I can quickly switch between by pressing hotkeys or clicking shortcut on my desktop. I have an AMD video card and have attempted to use the AMD VISION Engine Control Center to add presets then tweak the settings for each. However when I switch between the presets the settings are the same. How do I build presets using the VISION Engine Control Center that actually works (maybe I misunderstand what it is saving?) or is there a way to do this in Windows 7 or free software that actually works decently for this purpose?

  Read the article

• Which power USB hub uses if it has external power supply as well

  - by Mirage

  I have 7 port USB hub with external supply. I tried turning it off by removing external power but then it takes power from motherboard and is still working. I have many external hardrives connected to it. i was worrying if i turn off the power it may damage the motherboard by withdrawing so much power from that USB

  Read the article

• Partitioning External Hard Drive

  - by Srin

  Is there a way to partition a External Hard drive ? I have a WD 500GB external hard drive with USB interface

  Read the article

• Disable laptop's display on boot when used with external display

  - by Ryan

  I keep my laptop tucked away and solely use an external display with it via HDMI. In Windows 7 display settings, I have it set up to "Show desktop only on 2 [my external display]" This works fine in all cases except when I boot the laptop when the external display is already connected. In that case, the laptop's display stays on and sticks at the Windows 7 boot logo unless I manually shut the display off. (I should mention that while the laptop's display is stuck at the boot logo, the external monitor and computer are running just fine.) The laptop is an Asus N56VZ with Nvidia 650m graphics and the latest drivers. I've checked Nvidia's control panel as well as the BIOS and nothing looked very promising. Any ideas as to how I can get my laptop screen to shut itself off after booting into Windows?

  Read the article

• MySQL unstable behavior with external stroge

  - by onurozcelik

  In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

  Read the article

• Grounded outlet on external hard drive.

  - by goathens

  Is there any value in getting an external hard drive with a grounded power supply? Would grounding the drive protect it from a static jolt from my hand when I pick it up? I've only really ever used the huge 5.25" external housings (they usually have an integrated power supply and use the standard heavy PSU cable with ground), and I need some more but noticed while shopping that the current trend is towards smaller enclosures with the external brick (and hardly ever grounded).

  Read the article

• how to setup sonicwall tz210 to port forward packets received from external ip to another external ip

  - by lplp

  i have a sonicwall tz210 on a fixed ip, say ip1. And then i have, let's say a legacy server, with external ip ip2, which sends data to ip1 (and I have another server on ip1 behind the sonicwall which receives and processes that data). I would like to set up a new server on a different external ip ip3 that will receive and process data from the legacy server. How can I setup the sonicwall so that the packets received from the legacy server (from an external ip) are port forwarded to the external ip address ip3?

  Read the article

• Windows External Harddisk drive letter after cloning boot partition to it

  - by gladiator2345

  I cloned my windows 7 installation on c: to external hard drive. I applied usb patch using pwboot and i could successfully boot into windows. But My problem is even though i am booting in to external hd the file reference and system path is pointing to c: on my internal hard disk. If i remove internal hd and boot it will get stuck at login screen. Is there any way i can force drive letter c: to my boot partition on external hd while booting from it.

  Read the article

• Why are the external IP of my router not the same as the external IP of my computer

  - by Martin

  I have a standard network setup where all my network devices, both WIFI and ethernet, are connected to the same router. Lately, however, I've been experiencing some very strange behavior. It started as a simple connecting error, when I tried to reach an FTP server using the external IP. Of course I went right into one of those CheckMyIP sites, to double check the IP and it turned out to be correct. Then I went into my router setup, which is through a tool called aiport-tool, because I have an Apple Aiport Extreme router. Turns out the router displays a different external IP, and for some reason that external IP works when I try to access the FTP server. Can anyone explain what is going on? Why are the devices connected to the router displaying an incorrect external IP? BTW i have no VPN/proxy setups on any of my devices.

  Read the article

• win 7 back up utility cant detect external drive on a netbook

  - by decoder101

  im trying to image a new HP netbook via the windows 7 BACK UP util. however, it doesnt detect the external drive, although it's seen in my computer and BIOS. i tried using HP recovery manager with recovery disc creation but it says, no burning device installed although there is one... anyone successful in using the win7 back up utility? ive been tinkering this for a while but i cant make it right using an external dvd drive. unless i'll plug in an external hdd/

  Read the article

• securing hard drive when users boot from usb external

  - by eshriek

  I supervise the use of a 'community' desktop computer. I would like to allow the use of the desktop via an external drive to a specific individual. How do I secure the internal hard drive so that no access is possible while using the external drive? Primarily I want to avoid accidental modification of the hard drive. The desktop runs Vista. The external is Ubuntu.

  Read the article

• Working with an external button box

  - by Scott

  I tried this question on Stack Overflow, but I was pointed here, so here goes: For a new project for myself, I am looking for a way to be able to (for example) open a pop-up window on my laptop, by pressing a button on an external device (to be build by myself, or at least bought) connected with USB. Basically I would be looking at something like a Arduino or Raspberry (IF I am looking in the right direction) with buttons on it, and as soon as I hit a button on the external box with physical buttons, a command activates on my laptop and for example opens a popup window in which I can input tekst. Does anyone know: 1) if it is possible to do this at all. 2) What equipment is needed for the external box, what programming is needed. I preffer .net (dot net) but maybe it can only be done with software from the external box. If anyone can point me in the right direction, like make/model of the external box or websites I would be very happy. I have knowledge of Visual Studio/.net but I am willing to learn other languages if .net is not an option for this project. Thanks in advance Scott PS: If anyone knows of some better tags, or at least knows what I mean and needs me to edit the question, please do tell me... I am new on Stack Overflow/Superuser.

  Read the article

• Installing Ubuntu on an External Drive

  - by Dom

  I am trying to install ububtu on an external drive. I am a programmer who wants to start using Linux. I downloaded the usb installer from the ubuntu website and followed all the steps. But when I get to the part where I have to setup the partitioning, it says an error when moving forward "No root file system is defined". I've been doing some research and I think that I have to partition the external drive but do not know how to do so. The problem is that I only want 20gb used from that external drive and let the rest be used for storage. I am also a musician and use Pro tools so I would like to keep all my files there, but I dont want ubuntu on my main hardrive since the external one is portable. I'd appreciate it also if you could provide me the steps.

  Read the article

• How do I prevent an external monitor from shutting off when closing my laptop lid?

  - by Thom

  I've seen this issue on previous versions of Ubuntu, but not on 12.04 and some of those are resolved bugs, so I'm asking again. I've set up power management so that, when plugged in, my laptop does nothing when the lid is closed. I do this so that I can use as a desktop with my external monitor with the screen closed and the laptop scurried away from my desktop. I tried turning off the laptop monitor to see if that made a difference, but it doesn't. The problem is that closing the lid still shuts off my external monitor. What can I do to prevent this?

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >