Search Results

Search found 1046 results on 42 pages for 'forth'.

Page 11/42 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • Puppet, Nagios, Munin on cPanel based hosts

    - by WinkyWolly
    I've been managing 20-30~ cPanel based hosts over the past year with Puppet, Nagios and Munin for general monitoring / trending however a lot of the methods I've had to use to deploy / manage things such as configurations a pain. For those of you who aren't familiar with cPanel - it adds a few things to yum exclude such as perl*, ruby* and so forth. This causes issues with me being able to bootstrap monitoring on a new server via Puppet (well via the Package type) due to a bunch of conflicts with installing via Yum. Now I could create a custom RPM for everything and remove certain dependencies from the spec file however I would like to avoid this if possible. Does anyone have any proposed functional ways to manage this sort of environment? Currently I install Puppet, Facter and Munin via RPM's and force install using --nodeps and such (since they're installed, just no the ones Yum wants). Nagios I installed manually from source at this time (likely will create RPM's however I want to tackle this general issue first).

    Read the article

  • Mouse Icon Distorted on Secondary Display

    - by Nathan Taylor
    I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

    Read the article

  • Easiest Driver Back Up solution ?

    - by mgpyone
    I've to faced kinda of missing drivers after formatted Windows .. Especially, Graphic Drivers, Touch-pad driver, finger print driver and so forth are sensitive . They do not work without installing drivers. I can even download at its official website . But some drivers are not found in the website. .. Thus, I'm looking for a solution ( may be a software ) that can backup my drivers effectively ( if it can do with schedule, it'll be great) and can restore easily locally . Espcially, for Win XP and Vista. Any suggestions will be appreciated really.

    Read the article

  • How can I restore Outlook 2007 from a PST file without having to import everything?

    - by schnapple
    I recently upgraded to Windows 7 and went the "format from scratch" route. I backed up my C:\ drive to the free space on my D:\ drive. So now I have Outlook 2007 reinstalled and I have my .pst files and so forth from the previous installation. If memory serves the answer on getting all those emails back into Outlook again is "create a new .pst file for the account and then reimport everything". What I'd like to do is be able to just put the .pst file where it's supposed to go and then have Outlook 2007 just "remember" everything. But I'm pretty sure this doesn't work. Is there a way to restore Outlook from a pst file without having to re-import everything?

    Read the article

  • Monitoring bandwidth/latency/jitter between 2 sites?

    - by TheCleaner
    I have 2 sites connected via an MPLS network and I'd like to do the following: setup a host on each end that can "talk" back and forth between each other and somehow report/log what kind of throughput, jitter, latency, etc. they are experiencing between each other in 5 minute intervals. Something similar to Qcheck but that can be automated. Bottom line is I'm trying to determine if the WAN network is "stable" throughout the day or if something is wrong. We have video conferences between these sites and even at 1024kbps calls we are experiencing delays and jitter. I'm hoping to exonerate the network with some testing.

    Read the article

  • Google products are excessively slow

    - by Sixfoot Studio
    Hi, We're running Windows 2000 for our office server. For years now we have had the problem where everthing Google takes an excessively long time to do anything. Gmail hangs, Analytics takes forever, Google docs times out. I have been back and forth with our ISP on this matter and they are convinced it has something to do with our server. This does not happen when I am at home so the problem either lays with our server or with the ISP. Here is a screencast to show you what I mean. http://www.screencast.com/users/jamesvanderhoven/folders/Jing/media/f7ffce9a-0250-4112-b79d-7dc58c2c8b0a Has anyone else experienced this kind of problem and is there a way to resolve this please? Many thanks!

    Read the article

  • How to scan and annotate documents and receipts so metadata is searchable and embeddeded in document

    - by Precipitous
    I'm getting tired of living in the modern age and still having a messy filing cabinet full of paper. I have a nice cheap scanner and want to scan receipts, warrenties, and so forth. To make it possible to find these, I'd like to make them searchable via Windows Search (or google desktop search). Because I'm lazy with backups, I want a file format that embeds metadata into the file. Backups should be as simple as coping a bunch of image files around. I'm also cheap, and am not going to install an expensive solution. I'm hoping one of the basic formats can do this. So, what common scannable format satisfies: searchable and and metadata embedded in image generated. The more "open" and portable the better.

    Read the article

  • Indexing text file content with command line query

    - by Drew Carlton
    I take daily notes in a plaintext file labeled with date in the YYYYMMDD format. These files are no more than 100 lines long, and are written in a blog style format. I'd like to be able search these files as if they were blog posts indexed by google, with some phrase query returning the most relevant/recent date filenames, with a snippet containing the relevant part. Ideally it would be something like this: #searchindex "laptop no sound" returns: 20100909.txt: ... laptop sound isn't working... 20100101.txt ... sound is too loud... debating what laptop to buy... and so on and so forth. I'm working on a linux platform (Debian with GNOME). I've looked at beagle and tracker, but they just seem complete overkill for what I want.

    Read the article

  • 1 VoIP Conversation but 2 RTP Streams?

    - by pepito
    I'm testing a VoIP system based on OpenSIPS. It has no RTPproxy, so calls do not pass through OpenSIPS. I tried to make a call between two smartphones, and it succeeded. I also turned on Wireshark, and got this result. Is that mean that voice call from 1st phone to 2nd phone went through 1st RTP stream and voice call from 2nd phone to 1st phone went through 2nd RTP stream? Why couldn't it only used one RTP stream? It could just go back and forth :)

    Read the article

  • set tap0 using virt-manager for bridged wireless

    - by DaveO
    After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

    Read the article

  • Why doesn't Windows 7 allow me to format?

    - by hydroparadise
    Dell support can be fun to deal with right? Ultimately, I have been going back and forth with Dell on an issue and came to reinstalling Windows 7 32-Bit Pro. The problem is that Windows Setup will not let me format. I've read other posts that say Windows 7 must installed on first partition here. But now that confuses me because the computer came shipped with the installation on the third partion as shown in the picture below? Is there a real problem? Or is this a Microsoftism? Should I obliterate the "OEM" partition to make this work? Please note that the format, delete, new, and extend options are grayed out.

    Read the article

  • How can I format a USB drive as FAT from a MacBook Pro?

    - by Edward Tanguay
    I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

    Read the article

  • Why can't I open my Access application in design mode?

    - by mmyers
    I have been given an Access 2007 application (mainly VB code) that I need to modify. It has been locked down for production, so the toolbars and so forth are not visible. However, it is a .mdb file, not .mde, so in theory it should be possible to get into design mode by holding Shift while opening it. But that method has only worked a total of three times out of the (probably) 60 or 70 times I've tried. I realize now that I should have enabled the toolbars while I had it open, but unfortunately hindsight doesn't get me anywhere now. Does anyone know what might be causing the problem? Is it my own fault, or the application's, or Access's?

    Read the article

  • set tap0 using virt-manager for bridged wireless

    - by DaveO
    After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

    Read the article

  • Instructions to setup domain controller

    - by Robert Koritnik
    Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

    Read the article

  • Having to Toggle Between Two Sets of Video Drivers

    - by Maarx
    So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

    Read the article

  • Cinema4D for game development tutorials anyone ?

    - by George Profenza
    Hi, I started to learn Cinema 4D. I've noticed it's really easy to use for motion graphics, but I want to use it for modeling for games/realtime 3d engines. Before I used 3dsmax and it was easy to estimate how a model would look/behave in a 3d engine. The two main things I did was displaying Polygon triangles and displaying the Polygon Count. I've found the Total Polygons tick in HUD settings in Cinema 4D, but I can't find any display mode that will show triangles. Is there there a way to display triangle faces/not quads in Cinema4D ? If so how ? There is a Triangulate function, but I'd rather not Triangulate/Untriangulate all the time, especially since it's converting back and forth between the two doesn't always produce the same result.

    Read the article

  • Anybody know how to get podcasts sorted correctly on a Zune?

    - by Will
    If I could understand the logic behind it I could actually manage to get my stuff sorted correctly on the device. It doesn't matter how things are sorted on disk, or in the software itself. As items are added to the sync list they end up sorted in some weird manner which, quite frankly, brings out an anger in me that scares me. A primitive, misshapen and unthinking anger. Kind of like the lumpy guy in Altered States. Frankly, I'm afraid one day its going to burst forth and I will track down the entire Zune team and make them pay for their failures. Help me prevent this from happening. Help me understand what I need to do to ensure my podcasts end up in the order I wish them to be in, not some obscure random order that makes no sense.

    Read the article

  • HAPROXY per domain redirection

    - by SecondThought
    I'm trying to redirect requests to my load balancer by domain name with acl and hdr_dom, to a separate backend. The redirection works ok with the first request - 'GET /' (the destination server is a WordPress site) but when the client asks for the assets ('GET /blablabla/style.css' for example) the haproxy doesn't redirect it to the right backend anymore, but to the default one, with . In the haproxy log I can see the correct host that the request is for (the one that I defined in hdr_dom) but it's like that since the GET request itself is relative (I mean not containing the domain but only from the /blablabla and forth), haproxy doesn't recognize it with the hdr_dom. I'm just guessing here.. Please help...

    Read the article

  • Proper way to connect SATA and IDE Hard drives together?

    - by Bartek
    I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

    Read the article

  • Will Windows Barf on Constant Video Driver Overwrite?

    - by Maarx
    So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

    Read the article

  • Analyse frequencies of date ranges in Google Spreadsheet

    - by wnstnsmth
    I have a Google Spreadsheet where I would like to compute occurrences of date ranges. As you can see in my sheet, there is a column date_utc+1 which contains almost random date data. What I would like to do is put the date values into bins of 6 hours each, i.e., 12/5/2012 23:57:04 until 12/6/2012 0:03:17 would be in the first bin, 12/6/2012 11:20:53 until 12/6/2012 17:17:07 in the second bin, and so forth. Then, I would like to count the occurrence of those bins, such as bin_from bin_to freq ----------------------------------------------- 12/5/2012 23:57:04 12/6/2012 0:03:17 2 12/6/2012 11:20:53 12/6/2012 17:17:07 19 ... ... ... Hope it is clear what I mean. Partial hints are very welcome as well since I am pretty new to spreadsheeting.

    Read the article

  • I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

    - by Christopher Galpin
    I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

    Read the article

  • Language bar switched input types on me.

    - by Elijah
    I learned Japanese, but I'm not native to Japan, so I never had a Japanese keyboard. I used to use the language bar to go back and forth between English and Japanese, simply typing the words in romaji and having windows convert it into either hiragana, katakana and sometimes Kanji. Suddenly, my input type changes. I am no longer able to simply type in English, it changed my keyboard into a native Japanese keyboard, and what's worse it doesn't even allow me to write in hiragana, which I would need way more than katakana. Can anyone tell me how to restore it to the old setting where I simply chose what the output dialect would be, and typed the words phonetically in english and have it translate the sounds for me into japanese characters?

    Read the article

  • Kindle for PC - page loading problems

    - by Andrew Heath
    When viewing books in Kindle for PC, often going to the next page will change the line count at the bottom of the screen but not refresh the page view. Then, if you hit next again, you end up on the next next page (+2 rather than +1). This happens to me going backwards as well. Using arrow keys, or mouse clicks, or page down/up all creates this error. There doesn't seem to be any pattern to the occurrence other than "frequently". It happens on my Win7 64 bit and Win XP machines. I've only one Kindle book at the moment, PHP Object-Oriented Solutions by David Powers, so I suppose it could be a problem specific to that book. Does anyone else have this issue? It is extremely irritating to be constantly flipping back and forth just to get the page view to show the proper page.

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >