Search Results

Search found 13093 results on 524 pages for 'sixfoot studio'.

Page 1/524 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Coexistence of projects between Visual Studio 2010 and 2012

    - by sreejukg
    Microsoft has released another version of Visual Studio named Visual Studio 2012. As you can see there are user interface (UI) changes in all/most of the Microsoft applications as Microsoft is moving towards Windows 8 and changing the UI scheme for all of the applications. Visual Studio 2012 is a move to adapt the new interface requirements that are in coherent with Windows 8. Not only this Visual Studio 2012 has lots of improvements in several areas and it supports .Net framework 4.5. In the past, whenever a new version of Visual Studio launches, developers needed to upgrade the project to new version of Visual Studio which was a pain, especially when you are working with a team of developers. Once a solution is upgraded to a newer version, it was not possible to going back. With Visual studio 2012, you can avoid the pain of upgrading. Developers will be able to open their project in Visual Studio 2012 along with Visual Studio 2010 SP 1. This means if you create a project using Visual Studio 2012, you will be able to open it with Visual Studio 2010 SP 1 and vice versa. There are some exceptions (as always!). Visual Studio 2012 supports some new project types, which was not there in 2010 version. Such project, you will not be able to open in Visual Studio 2010. For e.g. Visual Studio 2012 brings a new project type named “Windows 8 Modern Applications”, such projects you will not be able to open using the 2010 version of Visual Studio. Just to prove the said subject, I am going to perform some simple operations. I installed Visual Studio 2010 with SP 1 and Visual Studio 2012 on my PC. See the snapshots for both the installations. Visual Studio 2010 Visual Studio 2012 Now I am going to perform two test cases. First create a project in 2010 Version and open it in 2012 version and vice versa. If you are interested, you can continue scrolling down, otherwise just say bye bye to this article. Case 1: Open a solution created using Visual Studio 2010 in 2012 version. I created a project in VS 2010 named TestProject2010 using empty ASP.Net web application template. Once created the project appears in VS 2010 as follows. I closed Visual Studio and opened the solution file using VS 2012 by using the Open Project dialog(File -> Open Project/Solution). Surprisingly, there is not even a warning message, just the project opened fine in Visual Studio 2012. Case 2: Open a solution created using Visual Studio 2012 in 2010 version. I have created a project in Visual Studio 2012 named testProject2012. See the screenshot of the project in VS 2012 below. Now try opening the solution in Visual Studio 2010. The solution loaded successfully, but Visual Studio failed to load project. See the screenshot. At first I was surprised. The Web application project template is available in both versions, So there should not be any problem. What is making the incompatibility? Is it ASP.Net version? Yes it is. VS 2012 assign ASP.Net 4.5 as the default version that was causing the trouble for Visual Studio 2010. I changed the version to .Net framework 4.0 and saved the project after that I was able to open the project in Visual Studio 2010. This as an excellent move from Visual Studio Team and allows enterprises to perform gradual upgrade to the new version. Now developers can work in any version based on availability and preference, simply I can use Visual Studio 2012 as my IDE while my colleague working on the same project can still use Visual Studio 2010.

    Read the article

  • Meet IntelliCommand (Visual Studio 2010/2012 extension)

    - by outcoldman
    How many shortcut keys you know in Visual Studio? Do you want to know all of them? I know how you can learn them very easy. I'd like to introduce you a cool extension for Visual Studio 2010/2012 which I wrote with help of my colleagues Drake Campbell and Aditya Mandaleeka. Let me just copy-paste description from Visual Studio Gallery: IntelliCommand - an extension for Visual Studio 2010 and 2012 which helps to find the short keys. It shows the help windows with all possible combinations when you press Ctrl or Shift or Alt or their combinations (hold it for about 2 seconds to see this window). Also it shows the list of possible combination when you press first combination of chord shortcut keys, like Ctrl+K, Ctrl+C (this combination comments selected text in editor). Read more... (on outcoldman.com)

    Read the article

  • [Visual Studio Extension Of The Day] Test Scribe for Visual Studio Ultimate 2010 and Test Professional 2010

    - by Hosam Kamel
      Test Scribe is a documentation power tool designed to construct documents directly from the TFS for test plan and test run artifacts for the purpose of discussion, reporting etc... . Known Issues/Limitations Customizing the generated report by changing the template, adding comments, including attachments etc… is not supported While opening a test plan summary document in  Office 2007, if you get the warning: “The file Test Plan Summary cannot be opened because there are problems with the contents” (with Details: ‘The file is corrupt and cannot be opened’), click ‘OK’. Then, click ‘Yes’ to recover the contents of the document. This will then open the document in Office 2007. The same problem is not found in Office 2010. Generated documents are stored by default in the “My documents” folder. The output path of the generated report cannot be modified. Exporting word documents for individual test suites or test cases in a test plan is not supported. Download it from Visual Studio Extension Manager Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

    Read the article

  • Visual Studio 2013 Static Code Analysis in depth: What? When and How?

    - by Hosam Kamel
    In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning.       2 Title The title of warning message       3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally.       Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

    Read the article

  • TFS 2008 Web Access Report 100 record limitation

    - by HosamKamel
    By default TFS 2008 Web Access has the limit of 100 record when you open any query in report mode. Even if you tried to export the query to excel or PDF you will only get first 100 record exported. To overcome this issue, you have to reconfigure this count in the web.config file Navigate to web access files C:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Wiwa Open web.config modify maxWorkitemsInReportList count to whatever count you need. You need to do modify the same configuration in web.config located here C:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Web  A full discussion thread exists here Team Foundation Server - Team System Web Access

    Read the article

  • Tip#102: Did you know… How to specify tag specific formatting

    - by The Official Microsoft IIS Site
    Let’s see this with an example.  I have the following html code on my page. Now if I format the document by selecting Edit –> Format document (or Ctrl K, Ctrl D) The document becomes I want the content inside td should remain on the same line after formatting the document. Following steps would show how you can specify tag specific formatting for the Visual Studio editor Right click on the editor in an aspx file and select Formatting and Validation... (or alternatively you can go from Menu...(read more)

    Read the article

  • State management using the Application class in ASP.Net applications

    - by nikolaosk
    I have explained some of the state mechanisms that we have in our disposal for preserving state in ASP.Net applications in various posts in this blog. You can have a look at this post , this post , this post and this one . I have not presented yet an example in using the Application class/object for preserving state within our application. Application state is available globally in an application.The way we access Application State is through the HttpApplication object's Application property. Let...(read more)

    Read the article

  • 17 new features in Visual Studio 2010

    - by vik20000in
    Visual studio 2010 has been released to RTM a few days back. This release of Visual studio 2010 comes with a big number of improvements on many fronts. In this post I will try and point out some of the major improvements in Visual Studio 2010. 1)      Visual studio IDE Improvement. Visual studio IDE has been rewritten in WPF. The look and feel of the studio has been improved for improved readability. Start page has been redesigned and template so that anyone can change the start page as they wish. 2)      Multiple Monitor - Support for Multiple Monitor was already there in Visual studio. But in this edition it has been improved as much that we can now place the document, design and code window outside the IDE in another monitor. 3)      ZOOM in Code Editor – Making the editors in WPF has made significant improvement for them. The best one that I like is the ZOOM feature. We can now zoom in the code editor with the help of the ctrl + Mouse scroll. The zoom feature does not work on the Design surface or windows with icon like solution view and toolbox. 4)      Box Selection - Another Important improvement in the Visual studio 2010 is the box selection. We can select a rectangular by holding down the Alt Key and selecting with mouse.  Now in the rectangular selection we can insert text, Paste same code in different line etc. This is helpful if you want to convert a number of variables from public to private etc… 5)      New Improved Search – One of the best productivity improvements in Visual studio 2010 is its new search as you type support. This has been done in the Navigate To window which can be brought up by pressing (Ctrl + ,). The navigate To windows also take help of the Camel casing and will be able to search with the help of camel casing when character is entered in upper case. For example we can search AOH for AddOrederHeader. 6)      Call Hierarchy – This feature is only available to the Visual C# and Visual C++ editor. The call hierarchy windows displays the calls made to and from (yes both to and from) a selected method property or a constructor. The call hierarchy also shows the implementation of interface and the overrides of virtual or abstract methods. This window is very helpful in understanding the code flow, and evaluating the effect of making changes. The best part is it is available at design time and not at runtime only like a debugger. 7)      Highlighting references – One of the very cool stuff in Visual Studio 2010 is the fact if you select a variable then all the use of that variable will be highlighted alongside. This should work for all the result of symbols returned by Find all reference. This also works for Name of class, objects variable, properties and methods. We can also use the Ctrl + Shift + Down Arrow or Up Arror to move through them. 8)      Generate from usage - The Generate from usage feature lets you use classes and members before you define them. You can generate a stub for any undefined class, constructor, method, property, field, or enum that you want to use but have not yet defined. You can generate new types and members without leaving your current location in code, This minimizes interruption to your workflow.9)      IntelliSense Suggestion Mode - IntelliSense now provides two alternatives for IntelliSense statement completion, completion mode and suggestion mode. Use suggestion mode for situations where classes and members are used before they are defined. In suggestion mode, when you type in the editor and then commit the entry, the text you typed is inserted into the code. When you commit an entry in completion mode, the editor shows the entry that is highlighted on the members list. When an IntelliSense window is open, you can press CTRL+ALT+SPACEBAR to toggle between completion mode and suggestion mode. 10)   Application Lifecycle Management – A client application for management of application lifecycle like version control, work item tracking, build automation, team portal etc is available for free (this is not available for express edition.). 11)   Start Page – The start page has been redesigned with WPF for new functionality and look. Tabbed areas are provided for content from different source including MSDN. Once you open some project the start page closes automatically. The list of recent project also lets you remove project from the list. And above all the start page is customizable enough to be changed as per individual requirement. 12)   Extension Manager – Visual Studio 2010 has provided good ways to be extended. We can also use MEF to extend most of the features of Visual Studio. The new extension manager now can go the visual studio gallery and install the extension without even opening any explorer. 13)   Code snippets – Visual studio 2010 for HTML, Jscript and Asp.net also. 14)   Improved Intelligence for JavaScript has been improved vastly (around 2-5 times). Intelligence now also shows the XML documentation comment on the go. 15)   Web Deployment – Web Deployment has been vastly improved. We can package and publish the web application in one click. Three major supported deployment scenarios are Web packages, one click deployment and Web configuration Transformation. 16)   SharePoint - Visual Studio 2010 also brings vastly improved development experience for SharePoint. We can create, edit, debug, package, deploy and activate SharePoint project from within Visual Studio. Deployment of Site is as easy as hitting F5. 17)   Azure – Visual Studio 2010 also comes with handy improvement for developing on windows Azure environment. Vikram

    Read the article

  • The Visual Studio development environment crashes when you open Visual Studio 2005, Visual Studio 20

    983279 ... The Visual Studio development environment crashes when you open Visual Studio 2005, Visual Studio 2008, or Visual Studio 2010This RSS feed provided by kbAlerz.com.Visit kbAlertz.com to subscribe. It's 100% free and you'll be able to recieve e-mail or RSS updates for the technologies you pick from the Microsoft Knowledge Base....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • The Visual Studio development environment crashes when you open Visual Studio 2005, Visual Studio 20

    983279 ... The Visual Studio development environment crashes when you open Visual Studio 2005, Visual Studio 2008, or Visual Studio 2010This RSS feed provided by kbAlerz.com.Visit kbAlertz.com to subscribe. It's 100% free and you'll be able to recieve e-mail or RSS updates for the technologies you pick from the Microsoft Knowledge Base....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Tips on installing Visual Studio 2010 SP1

    - by Jon Galloway
    Visual Studio SP1 went up on MSDN downloads (here) on March 8, and will be released publicly on March 10 here. Release announcements: Soma: Visual Studio 2010 enhancements Jason Zander: Announcing Visual Studio 2010 Service Pack 1 I started on this post with tips on installing VS2010 SP1 when I realized I’ve been writing these up for Visual Studio and .NET framework SP releases for a while (e.g. VS2008 / .NET 3.5 SP1 post, VS2005 SP1 post). Looking back the years of Visual Studio SP installs (and remembering when we’d get up to SP6 for a Visual Studio release), I’m happy to see that it just keeps getting easier. Service Packs are a lot less finicky about requiring beta software to be uninstalled, install more quickly, and are just generally a lot less scary. If I can’t have a jetpack, at least my future provided me faster, easier service packs. Disclaimer: These tips are just general things I've picked up over the years. I don't have any inside knowledge here. If you see anything wrong, be sure to let me know in the comments. You may want to check the readme file before installing - it's short, and it's in that new-fangled HTML format. On with the tips! Before starting, uninstall Visual Studio features you don't use Visual Studio service packs (and other Microsoft service packs as well) install patches for the specific features you’ve got installed. This is a big reason to always do a custom install when you first install Visual Studio, but it’s not difficult to update your existing installation. Here’s the quick way to do that: Tap the windows key and type “add or remove programs” and press enter (or click on the “Add or remove programs” link if you must).   Type “Visual Studio 2010” in the search box in the upper right corner, click on the Visual Studio program (the one with the VS infinity looking logo) and click on Uninstall/Change. Click on Add or Remove Features The next part’s up to you – what features do you actually use? I’ve been doing primarily ASP.NET MVC development in C# lately, so I selected Visual C# and Visual Web Developer. Remember that you can install features later if needed, and can also install the express versions if you want. Selecting everything just because it’s there - or you paid for it – means that you install updates for everything, every time. When you’ve made your changes, click on the Update button to uninstall unused features. Shut down all instances of Visual Studio It probably goes without saying that you should close a program down before installing it, partly to avoid the file-in-use-reboot-after-install horror. Additional "hunch / works on my machine" quality tip: On one computer I saw a note in the setup log about Visual Studio a prompt for user input to close Visual Studio, although I never saw the prompt. Just to  be sure, I'd personally open up Task Manager and kill any devenv.exe processes I saw running, as it couldn't hurt. Use the web installer I use the Web Installers whenever possible. There’s no point in downloading the DVD unless you’re doing multiple installs or won’t have internet access. The DVD IS is 1.5GB, since it needs to be able to service every possible supported installation option on both x86 and x64. The web installer is 776 KB (smaller than calc.exe), so you can start the installation right away. Like other web installers, the real benefit is that it only installs the updates you need (hence the reason for step 1 – uninstalling unused components). Instead of 1.5GB, my download was roughly 530MB. If you’re installing from MSDN (this link takes you right to the Visual Studio installs), select the first one on the list: The first step in the installation process is to analyze the machine configuration and tell you what needs to be installed. Since I've trimmed down my features, that's a pretty short list. The time's not far off where I may not install SQL Server on my dev machines, just using SQL Server Compact - that would shorten the list further. When I hit next, you can see that the download size has shrunk considerably. When I start the install, note that the installation begins while other components are downloading - another benefit of the web install. On my mid-range desktop machine, the install took 25 minutes. What if it takes longer? According to Heath Stewart (Visual Studio installer guru), average SP1 installs take roughly 45 minutes. An installation which takes hours to complete may be a sign of a problem: see his post Visual Studio 2010 Service Pack 1 installing for over 2 hours could be a sign of a problem. Why so long? Yes, even 25 minutes is a while. Heath's got another blog post explaining why the update can take longer than the initial install (see: A patch may take as long or longer to install than the target product) which explains all the additional steps and complexities a patch needs to deal with, as well as some mitigation steps that deployment authors can take to mitigate the impact. Other things to know about Visual Studio 2010 SP1 Installs over Visual Studio 2010 SP1 Beta That's nice. Previous Visual Studio versions did a number of annoying things when you installed SP's over beta's - fail with weird errors, get part way through and tell you needed to cancel and uninstall first, etc. I've installed this on two machines that had random beta stuff installed without tears. That Readme file you didn't read I mentioned the readme file earlier (http://go.microsoft.com/fwlink/?LinkId=210711 ). Some interesting things I picked up in there: 2.1.3. Visual Studio 2010 Service Pack 1 installation may fail when a USB drive or other removeable drive is connected 2.1.4. Visual Studio must be restarted after Visual Studio 2010 SP1 tooling for SQL Server Compact (Compact) 4.0 is installed 2.2.1. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled to restore certain components 2.2.2. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled before SP1 can be installed again 2.4.3.1. Async CTP If you installed the pre-SP1 version of Async CTP but did not uninstall it before you installed Visual Studio 2010 SP1, then your computer will be in a state in which the version of the C# compiler in the .NET Framework does not match the C# compiler in Visual Studio. To resolve this issue: After you install Visual Studio 2010 SP1, reinstall the SP1 version of the Async CTP from here. Hardware acceleration for Visual Studio is disabled on Windows XP Visual Studio 2010 SP1 disables hardware acceleration when running on Windows XP (only on XP). You can turn it back on in the Visual Studio options, under Environment / General, as shown below. See Jason Zander's post titled Performance Troubleshooting Article and VS2010 SP1 Change.

    Read the article

  • Visual Studio 2012 - Express vs Professional

    - by Dan
    I'm having trouble finding a feature comparison between Visual Studio 2012 express edition and the professional edition. I'm using the trial Profession version at the moment, but it'll run out soon, so I need to make a decision whether to purchase the full version. Obviously I can just try both initially and see if the express edition is suitable, but the problem is that there are that many features in Visual Studio, there might be a really useful feature that was missing in the standard edition that I didn't even know existed! Or I didn't spot was missing until later down the line. I could really do with a feature comparison list like the one for all non-express editions here. It's a shame that page doesn't include the express edition. (as a side note, there doesn't seem to be a visual-studio-2012 tag, so I had to just use visual-studio. Could someone with enough rep to create tags add a visual-studio-2012 tag?)

    Read the article

  • Change default language settings in Visual Studio 2012

    - by sreejukg
    The first thing you need to do after the installation of Visual Studio 2012 is to choose the IDE preferences. Once you select your preferred collection of settings, the IDE will always choose dialogs and other options according to your selection. Nowadays developer’s needs to work with different programming environments and due to this, developers might need to reset the default settings. In this article, I am going to demonstrate how you can change the default settings in Visual Studio 2012. For the purpose of this demonstration, I have installed Visual Studio 2012 and selected C++ as my default environment settings. So now when I go to file -> new project, it will give me C++ templates by default as follows. If you want to select another language, you need to expand Other Languages section and select C# or VB. Now I am going to change these default settings. I am going to change the default language preference to C#. In Visual Studio 2012, go to tools menu and select Import and Export Settings. Here you have 3 options; one is to export the current settings so that the settings are saved for future use. Also you can import previously saved settings. The last option available is to reset it to default. It is a good Idea to export your settings and import it as you need in later stages. To reset the settings to default select the Reset option and click next. Now Visual Studio will ask you to whether you would like to save the settings, which can be used in future to restore. Select any one option and click next. For the purpose of this demo, I have selected not to save the settings. Click Next button to continue. Now Visual Studio will bring you the similar dialog that appears just after installation to select your IDE settings. Select the required settings from the available list and click Finish button. Click Finish once you are done. If everything OK, you will see the success message as below. Now go to file -> new Project, you will see the selected language appear by default. I selected C# in the previous step and the new project dialog appears as follows. Changing IDE settings in Visual Studio 2012 is very easy and straight forward.

    Read the article

  • Top things web developers should know about the Visual Studio 2013 release

    - by Jon Galloway
    ASP.NET and Web Tools for Visual Studio 2013 Release NotesASP.NET and Web Tools for Visual Studio 2013 Release NotesSummary for lazy readers: Visual Studio 2013 is now available for download on the Visual Studio site and on MSDN subscriber downloads) Visual Studio 2013 installs side by side with Visual Studio 2012 and supports round-tripping between Visual Studio versions, so you can try it out without committing to a switch Visual Studio 2013 ships with the new version of ASP.NET, which includes ASP.NET MVC 5, ASP.NET Web API 2, Razor 3, Entity Framework 6 and SignalR 2.0 The new releases ASP.NET focuses on One ASP.NET, so core features and web tools work the same across the platform (e.g. adding ASP.NET MVC controllers to a Web Forms application) New core features include new templates based on Bootstrap, a new scaffolding system, and a new identity system Visual Studio 2013 is an incredible editor for web files, including HTML, CSS, JavaScript, Markdown, LESS, Coffeescript, Handlebars, Angular, Ember, Knockdown, etc. Top links: Visual Studio 2013 content on the ASP.NET site are in the standard new releases area: http://www.asp.net/vnext ASP.NET and Web Tools for Visual Studio 2013 Release Notes Short intro videos on the new Visual Studio web editor features from Scott Hanselman and Mads Kristensen Announcing release of ASP.NET and Web Tools for Visual Studio 2013 post on the official .NET Web Development and Tools Blog Scott Guthrie's post: Announcing the Release of Visual Studio 2013 and Great Improvements to ASP.NET and Entity Framework Okay, for those of you who are still with me, let's dig in a bit. Quick web dev notes on downloading and installing Visual Studio 2013 I found Visual Studio 2013 to be a pretty fast install. According to Brian Harry's release post, installing over pre-release versions of Visual Studio is supported.  I've installed the release version over pre-release versions, and it worked fine. If you're only going to be doing web development, you can speed up the install if you just select Web Developer tools. Of course, as a good Microsoft employee, I'll mention that you might also want to install some of those other features, like the Store apps for Windows 8 and the Windows Phone 8.0 SDK, but they do download and install a lot of other stuff (e.g. the Windows Phone SDK sets up Hyper-V and downloads several GB's of VM's). So if you're planning just to do web development for now, you can pick just the Web Developer Tools and install the other stuff later. If you've got a fast internet connection, I recommend using the web installer instead of downloading the ISO. The ISO includes all the features, whereas the web installer just downloads what you're installing. Visual Studio 2013 development settings and color theme When you start up Visual Studio, it'll prompt you to pick some defaults. These are totally up to you -whatever suits your development style - and you can change them later. As I said, these are completely up to you. I recommend either the Web Development or Web Development (Code Only) settings. The only real difference is that Code Only hides the toolbars, and you can switch between them using Tools / Import and Export Settings / Reset. Web Development settings Web Development (code only) settings Usually I've just gone with Web Development (code only) in the past because I just want to focus on the code, although the Standard toolbar does make it easier to switch default web browsers. More on that later. Color theme Sigh. Okay, everyone's got their favorite colors. I alternate between Light and Dark depending on my mood, and I personally like how the low contrast on the window chrome in those themes puts the emphasis on my code rather than the tabs and toolbars. I know some people got pretty worked up over that, though, and wanted the blue theme back. I personally don't like it - it reminds me of ancient versions of Visual Studio that I don't want to think about anymore. So here's the thing: if you install Visual Studio Ultimate, it defaults to Blue. The other versions default to Light. If you use Blue, I won't criticize you - out loud, that is. You can change themes really easily - either Tools / Options / Environment / General, or the smart way: ctrl+q for quick launch, then type Theme and hit enter. Signing in During the first run, you'll be prompted to sign in. You don't have to - you can click the "Not now, maybe later" link at the bottom of that dialog. I recommend signing in, though. It's not hooked in with licensing or tracking the kind of code you write to sell you components. It is doing good things, like  syncing your Visual Studio settings between computers. More about that here. So, you don't have to, but I sure do. Overview of shiny new things in ASP.NET land There are a lot of good new things in ASP.NET. I'll list some of my favorite here, but you can read more on the ASP.NET site. One ASP.NET You've heard us talk about this for a while. The idea is that options are good, but choice can be a burden. When you start a new ASP.NET project, why should you have to make a tough decision - with long-term consequences - about how your application will work? If you want to use ASP.NET Web Forms, but have the option of adding in ASP.NET MVC later, why should that be hard? It's all ASP.NET, right? Ideally, you'd just decide that you want to use ASP.NET to build sites and services, and you could use the appropriate tools (the green blocks below) as you needed them. So, here it is. When you create a new ASP.NET application, you just create an ASP.NET application. Next, you can pick from some templates to get you started... but these are different. They're not "painful decision" templates, they're just some starting pieces. And, most importantly, you can mix and match. I can pick a "mostly" Web Forms template, but include MVC and Web API folders and core references. If you've tried to mix and match in the past, you're probably aware that it was possible, but not pleasant. ASP.NET MVC project files contained special project type GUIDs, so you'd only get controller scaffolding support in a Web Forms project if you manually edited the csproj file. Features in one stack didn't work in others. Project templates were painful choices. That's no longer the case. Hooray! I just did a demo in a presentation last week where I created a new Web Forms + MVC + Web API site, built a model, scaffolded MVC and Web API controllers with EF Code First, add data in the MVC view, viewed it in Web API, then added a GridView to the Web Forms Default.aspx page and bound it to the Model. In about 5 minutes. Sure, it's a simple example, but it's great to be able to share code and features across the whole ASP.NET family. Authentication In the past, authentication was built into the templates. So, for instance, there was an ASP.NET MVC 4 Intranet Project template which created a new ASP.NET MVC 4 application that was preconfigured for Windows Authentication. All of that authentication stuff was built into each template, so they varied between the stacks, and you couldn't reuse them. You didn't see a lot of changes to the authentication options, since they required big changes to a bunch of project templates. Now, the new project dialog includes a common authentication experience. When you hit the Change Authentication button, you get some common options that work the same way regardless of the template or reference settings you've made. These options work on all ASP.NET frameworks, and all hosting environments (IIS, IIS Express, or OWIN for self-host) The default is Individual User Accounts: This is the standard "create a local account, using username / password or OAuth" thing; however, it's all built on the new Identity system. More on that in a second. The one setting that has some configuration to it is Organizational Accounts, which lets you configure authentication using Active Directory, Windows Azure Active Directory, or Office 365. Identity There's a new identity system. We've taken the best parts of the previous ASP.NET Membership and Simple Identity systems, rolled in a lot of feedback and made big enhancements to support important developer concerns like unit testing and extensiblity. I've written long posts about ASP.NET identity, and I'll do it again. Soon. This is not that post. The short version is that I think we've finally got just the right Identity system. Some of my favorite features: There are simple, sensible defaults that work well - you can File / New / Run / Register / Login, and everything works. It supports standard username / password as well as external authentication (OAuth, etc.). It's easy to customize without having to re-implement an entire provider. It's built using pluggable pieces, rather than one large monolithic system. It's built using interfaces like IUser and IRole that allow for unit testing, dependency injection, etc. You can easily add user profile data (e.g. URL, twitter handle, birthday). You just add properties to your ApplicationUser model and they'll automatically be persisted. Complete control over how the identity data is persisted. By default, everything works with Entity Framework Code First, but it's built to support changes from small (modify the schema) to big (use another ORM, store your data in a document database or in the cloud or in XML or in the EXIF data of your desktop background or whatever). It's configured via OWIN. More on OWIN and Katana later, but the fact that it's built using OWIN means it's portable. You can find out more in the Authentication and Identity section of the ASP.NET site (and lots more content will be going up there soon). New Bootstrap based project templates The new project templates are built using Bootstrap 3. Bootstrap (formerly Twitter Bootstrap) is a front-end framework that brings a lot of nice benefits: It's responsive, so your projects will automatically scale to device width using CSS media queries. For example, menus are full size on a desktop browser, but on narrower screens you automatically get a mobile-friendly menu. The built-in Bootstrap styles make your standard page elements (headers, footers, buttons, form inputs, tables etc.) look nice and modern. Bootstrap is themeable, so you can reskin your whole site by dropping in a new Bootstrap theme. Since Bootstrap is pretty popular across the web development community, this gives you a large and rapidly growing variety of templates (free and paid) to choose from. Bootstrap also includes a lot of very useful things: components (like progress bars and badges), useful glyphicons, and some jQuery plugins for tooltips, dropdowns, carousels, etc.). Here's a look at how the responsive part works. When the page is full screen, the menu and header are optimized for a wide screen display: When I shrink the page down (this is all based on page width, not useragent sniffing) the menu turns into a nice mobile-friendly dropdown: For a quick example, I grabbed a new free theme off bootswatch.com. For simple themes, you just need to download the boostrap.css file and replace the /content/bootstrap.css file in your project. Now when I refresh the page, I've got a new theme: Scaffolding The big change in scaffolding is that it's one system that works across ASP.NET. You can create a new Empty Web project or Web Forms project and you'll get the Scaffold context menus. For release, we've got MVC 5 and Web API 2 controllers. We had a preview of Web Forms scaffolding in the preview releases, but they weren't fully baked for RTM. Look for them in a future update, expected pretty soon. This scaffolding system wasn't just changed to work across the ASP.NET frameworks, it's also built to enable future extensibility. That's not in this release, but should also hopefully be out soon. Project Readme page This is a small thing, but I really like it. When you create a new project, you get a Project_Readme.html page that's added to the root of your project and opens in the Visual Studio built-in browser. I love it. A long time ago, when you created a new project we just dumped it on you and left you scratching your head about what to do next. Not ideal. Then we started adding a bunch of Getting Started information to the new project templates. That told you what to do next, but you had to delete all of that stuff out of your website. It doesn't belong there. Not ideal. This is a simple HTML file that's not integrated into your project code at all. You can delete it if you want. But, it shows a lot of helpful links that are current for the project you just created. In the future, if we add new wacky project types, they can create readme docs with specific information on how to do appropriately wacky things. Side note: I really like that they used the internal browser in Visual Studio to show this content rather than popping open an HTML page in the default browser. I hate that. It's annoying. If you're doing that, I hope you'll stop. What if some unnamed person has 40 or 90 tabs saved in their browser session? When you pop open your "Thanks for installing my Visual Studio extension!" page, all eleventy billion tabs start up and I wish I'd never installed your thing. Be like these guys and pop stuff Visual Studio specific HTML docs in the Visual Studio browser. ASP.NET MVC 5 The biggest change with ASP.NET MVC 5 is that it's no longer a separate project type. It integrates well with the rest of ASP.NET. In addition to that and the other common features we've already looked at (Bootstrap templates, Identity, authentication), here's what's new for ASP.NET MVC. Attribute routing ASP.NET MVC now supports attribute routing, thanks to a contribution by Tim McCall, the author of http://attributerouting.net. With attribute routing you can specify your routes by annotating your actions and controllers. This supports some pretty complex, customized routing scenarios, and it allows you to keep your route information right with your controller actions if you'd like. Here's a controller that includes an action whose method name is Hiding, but I've used AttributeRouting to configure it to /spaghetti/with-nesting/where-is-waldo public class SampleController : Controller { [Route("spaghetti/with-nesting/where-is-waldo")] public string Hiding() { return "You found me!"; } } I enable that in my RouteConfig.cs, and I can use that in conjunction with my other MVC routes like this: public class RouteConfig { public static void RegisterRoutes(RouteCollection routes) { routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapMvcAttributeRoutes(); routes.MapRoute( name: "Default", url: "{controller}/{action}/{id}", defaults: new { controller = "Home", action = "Index", id = UrlParameter.Optional } ); } } You can read more about Attribute Routing in ASP.NET MVC 5 here. Filter enhancements There are two new additions to filters: Authentication Filters and Filter Overrides. Authentication filters are a new kind of filter in ASP.NET MVC that run prior to authorization filters in the ASP.NET MVC pipeline and allow you to specify authentication logic per-action, per-controller, or globally for all controllers. Authentication filters process credentials in the request and provide a corresponding principal. Authentication filters can also add authentication challenges in response to unauthorized requests. Override filters let you change which filters apply to a given action method or controller. Override filters specify a set of filter types that should not be run for a given scope (action or controller). This allows you to configure filters that apply globally but then exclude certain global filters from applying to specific actions or controllers. ASP.NET Web API 2 ASP.NET Web API 2 includes a lot of new features. Attribute Routing ASP.NET Web API supports the same attribute routing system that's in ASP.NET MVC 5. You can read more about the Attribute Routing features in Web API in this article. OAuth 2.0 ASP.NET Web API picks up OAuth 2.0 support, using security middleware running on OWIN (discussed below). This is great for features like authenticated Single Page Applications. OData Improvements ASP.NET Web API now has full OData support. That required adding in some of the most powerful operators: $select, $expand, $batch and $value. You can read more about OData operator support in this article by Mike Wasson. Lots more There's a huge list of other features, including CORS (cross-origin request sharing), IHttpActionResult, IHttpRequestContext, and more. I think the best overview is in the release notes. OWIN and Katana I've written about OWIN and Katana recently. I'm a big fan. OWIN is the Open Web Interfaces for .NET. It's a spec, like HTML or HTTP, so you can't install OWIN. The benefit of OWIN is that it's a community specification, so anyone who implements it can plug into the ASP.NET stack, either as middleware or as a host. Katana is the Microsoft implementation of OWIN. It leverages OWIN to wire up things like authentication, handlers, modules, IIS hosting, etc., so ASP.NET can host OWIN components and Katana components can run in someone else's OWIN implementation. Howard Dierking just wrote a cool article in MSDN magazine describing Katana in depth: Getting Started with the Katana Project. He had an interesting example showing an OWIN based pipeline which leveraged SignalR, ASP.NET Web API and NancyFx components in the same stack. If this kind of thing makes sense to you, that's great. If it doesn't, don't worry, but keep an eye on it. You're going to see some cool things happen as a result of ASP.NET becoming more and more pluggable. Visual Studio Web Tools Okay, this stuff's just crazy. Visual Studio has been adding some nice web dev features over the past few years, but they've really cranked it up for this release. Visual Studio is by far my favorite code editor for all web files: CSS, HTML, JavaScript, and lots of popular libraries. Stop thinking of Visual Studio as a big editor that you only use to write back-end code. Stop editing HTML and CSS in Notepad (or Sublime, Notepad++, etc.). Visual Studio starts up in under 2 seconds on a modern computer with an SSD. Misspelling HTML attributes or your CSS classes or jQuery or Angular syntax is stupid. It doesn't make you a better developer, it makes you a silly person who wastes time. Browser Link Browser Link is a real-time, two-way connection between Visual Studio and all connected browsers. It's only attached when you're running locally, in debug, but it applies to any and all connected browser, including emulators. You may have seen demos that showed the browsers refreshing based on changes in the editor, and I'll agree that's pretty cool. But it's really just the start. It's a two-way connection, and it's built for extensiblity. That means you can write extensions that push information from your running application (in IE, Chrome, a mobile emulator, etc.) back to Visual Studio. Mads and team have showed off some demonstrations where they enabled edit mode in the browser which updated the source HTML back on the browser. It's also possible to look at how the rendered HTML performs, check for compatibility issues, watch for unused CSS classes, the sky's the limit. New HTML editor The previous HTML editor had a lot of old code that didn't allow for improvements. The team rewrote the HTML editor to take advantage of the new(ish) extensibility features in Visual Studio, which then allowed them to add in all kinds of features - things like CSS Class and ID IntelliSense (so you type style="" and get a list of classes and ID's for your project), smart indent based on how your document is formatted, JavaScript reference auto-sync, etc. Here's a 3 minute tour from Mads Kristensen. The previous HTML editor had a lot of old code that didn't allow for improvements. The team rewrote the HTML editor to take advantage of the new(ish) extensibility features in Visual Studio, which then allowed them to add in all kinds of features - things like CSS Class and ID IntelliSense (so you type style="" and get a list of classes and ID's for your project), smart indent based on how your document is formatted, JavaScript reference auto-sync, etc. Lots more Visual Studio web dev features That's just a sampling - there's a ton of great features for JavaScript editing, CSS editing, publishing, and Page Inspector (which shows real-time rendering of your page inside Visual Studio). Here are some more short videos showing those features. Lots, lots more Okay, that's just a summary, and it's still quite a bit. Head on over to http://asp.net/vnext for more information, and download Visual Studio 2013 now to get started!

    Read the article

  • Visual Studio 2013 - Express for Web vs Professional [duplicate]

    - by TimS
    This question already has an answer here: Visual Studio 2012 - Express vs Professional 2 answers What are the main differences and limitations between Visual Studio 2013 Express and Visual Studio 2013 Professional? I'm specifically interested in information related to the Web edition. I need to be able to develop ASP.Net applications, Windows Services and console applications - not Desktop or Phone apps. Microsoft seems to hide this information well and I can only seem to find information relating to 2012 products and earlier.

    Read the article

  • Visual Studio Shortcut: Surround With

    - by Jeff Widmer
    I learned a new Visual Studio keyboard shortcut today that is really awesome; the “Surround With” shortcut.  You can trigger the Surround With context menu by pressing the Ctrl-K, Ctrl-S key combination when on a line of code. Ctrl-K, Ctrl-S means to hold down the Control key and then press K and then while still holding down the Control key press S. Here is where this comes in handy: You type a line of code and then realize you need to put it within an if statement block. So you type “if” and hit tab twice to insert the if statement code snippet.  Then you highlight the previous line of code that you typed, and then either drag and drop it into the if-then block or cut and paste it.  That is not too bad but it is a lot of extra key clicks and mouse moves. Now try the same with the Surround With keyboard shortcut.  Just highlight that line of code that you just typed and press Ctrl-K, Ctrl-S and choose the if statement code snippet, hit tab, and POW!... you are done!  No more code moving/indenting required. Here is what the Surround With context menu looks like: Just up or down arrow inside the drop down list to the code snippet that you want to surround your currently selected text with.  Did I mention this is AWESOME! Now it is so simple to surround lines of code with an if-then block or a try-catch-finally block... things that usually took several key clicks and maybe one or two mouse moves. And this works in both Visual Studio 2008 and Visual Studio 2010 which means it has been around for a long time and I never knew about it.   Technorati Tags: Visual Studio Keyboard Shortcut

    Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >