Search Results

Search found 5612 results on 225 pages for 'communication protocol'.

Page 110/225 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• L2TP server - site-to-site vpn connection

  - by Pyro

  I am not sure this is the right place for this question but here goes. We want to connect users using an L2TP VPN connection to a users at the other end of a SonicWall site-to-site VPN. Currently we have a SonicWall firewall/router contraption in the home-office that is connected to a far-office over a VPN. Communications with machines in the home-office and far-office is fine. We also have an L2TP server running on the SonicWall that outside users can connect to. This gives them access to machines in the home-office. Communication between outside users and the home-office is fine. However outside users connected to the home-office via the L2TP server can't communicate with machines in the far-office. Will there need to be network bridging or routing needed? Or will this simply be a firewall setting to get this working? Thanks for any help or clues you provide! Rob

  Read the article

• HAProxy with 'backup' failure

  - by A.RG

  I have a simple configuration of 2 MySQL being load balanced by HAProxy. For an unfortunate reason I need to use them in Passive\Active mode. So I thought I'd configure one DB as 'backup' and go to sleep. But I was wrong. Whenever I add the 'backup' to the server line HAProxy throws a communication link error (essentially saying 'no DB available" (with the 'backup' it works great). It just doesnt consider that server as a valid option any more... I have tried this configuration: listen mysql 10.0.0.109:3307 mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup and also this configuration: frontend mysql_proxy bind 10.0.0.109:3307 default_backend mysql backend mysql mode tcp balance roundrobin option httpchk server db01 10.0.0.236:3306 server db02 10.0.0.68:3306 backup Nothing worked! Can anyone point me in the right direction? Thanks

  Read the article

• Firewall issue with multiple SIP PROXY / REGISTRAR servers

  - by MikeBrom

  Hi We have a pair of Internet-facing SIP PROXY/REGISTRAR servers (for resilienced and load-balancing). When a SIP phone registers, it will be handled by one of the REGISTRAR servers (round-robin DNS) - and since this registration is renewed, the firewall port/address translation is maintained. Therefore, when a call is to be sent back to the phone the INVITE message passes successfully through the firewall. However, it is likely that the phone may register with one of the two servers, but the INVITE may come from the other. In this situation, the call fails since there is no translation in place on the firewall. Is there a feature in the SIP protocol to facilitate this? Any other ideas? As our traffic grows, we will no doubt end-up with more than two servers - so the problem will escalate. Thanks, Mike

  Read the article

• SMTP error 503 when sending mail with Windows Mail & Mobile Me:

  - by Marty Pitt

  I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

  Read the article

• Lan, vpn on Amazon EC2, how to?

  The problem is as follows: I have 2 windows2003 server instances running on the cloud. 1) How can I create a local area network from these 2 instances? 2) Assuming that I want to create a VPN network from these 2 instances, how do I do that? (I'm not very good in networking, therefor the above problem description might be incomplete or not very clear.) A detailed answer or clarification would be praised and appreciated! What I tried: 1) Setting up OpenVPN, but I got lost in the process. 2) Creating a VPN from windows2003 server in the following manner: on instance a): set up a dhcp server; set up an "accept income vpn" connection; with the followin tcp ip settings: obtain an ip from the dhcp server; on instance b): created a new vpn connection, tried to connect to intance A, using the instance A static IP but error 806 was thrown, something relate to a GRE protocol.

  Read the article

• How do I force .htaccess authorization to occur over ssl?

  - by kenja

  I'm trying to force a particular directory to require only allowed IPs and a valid username/password through basic authorization. To ensure that the username/password are sent in encrypted form, I want the directory to also force SSL use. Here is what I have in my .htaccess file: # Force HTTPS-Connection RewriteEngine On RewriteCond %{SERVER_PORT} !^443$ RewriteRule (.*) https://www.mywebsite.com%{REQUEST_URI} [R,L] ## password begin ## AuthName "Restricted Access" AuthUserFile /var/www/admin/.htpasswd AuthType Basic Require valid-user Order deny,allow Deny from all Allow from 79.1.231.151 62.123.134.83 Satisfy All Unfortunately, when I access that directory using http protocol, it is asking for the password before it redirects the page to the secure version. This means the password is sent unencrypted. What am I doing wrong? Is there a way to do this?

  Read the article

• Why am I getting this SVN can't move .svn/tmp/x to trunk/x error?

  - by Alex Waters

  I am trying to checkout into the virtualbox shared folder with svn 1.7 in ubuntu 12.04 running as a guest on a windows 7 host. I had read that this error was a 1.6 problem, and updated - but am still receiving the error: svn: E000071: Can't move '/mnt/hostShare/code/www/.svn/tmp/svn-hsOG5X' to '/mnt/hostShare/code/www/trunk/statement.aspx?d=201108': Protocol error I found this blog post about the same error in a mac environment, but am finding that changing the folder/file permissions does nothing. vim .svn/entires just has the number 12 - does this need to be changed? Thank you for any assistance! (just another reason for why I prefer git...)

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• How to set up an FTP user on UBUNTU 9 server using vsftpd utility?

  - by Pavel

  Hi guys. I'm kinda new to this so bear with me. I've set up a server and now I need to create ftp user for it. I'm doing this by typing: useradd pavel passwd pavel And then I'm running iptables -I INPUT 1 -p tcp --dport 21 -j ACCEPT iptables-save > /etc/iptables.rules in order to open ftp ports and lastly, I'm changing the usermod by: usermod -s /bin/sh pavel So now tell me - what I'm doing wrong here? I just want to connect using FTP protocol. Please help...

  Read the article

• Skype companywide global contacts list

  - by Martin

  We are a medium sized company based across several sites and with a number of home workers. We have more or less settled on Skype as our defacto method of communication. At the moment the only pain is ensuring that everybody has all the other employees added to their contact list. Can be a real pain when a new employee starts and they have to send details to everyone else and vice versa. Is there a solution that allows us to manage a central contacts list that we can push out to new/existing users?

  Read the article

• Skype companywide global contacts list

  - by Martin

  We are a medium sized company based across several sites and with a number of home workers. We have more or less settled on Skype as our defacto method of communication. At the moment the only pain is ensuring that everybody has all the other employees added to their contact list. Can be a real pain when a new employee starts and they have to send details to everyone else and vice versa. Is there a solution that allows us to manage a central contacts list that we can push out to new/existing users?

  Read the article

• Websphere SSL handshake with active directory cluster

  - by ring bearer

  We have a WebSphere based application that uses Active Directory(AD) based security configurations. Under WebSphere "Global security" we have configured the active directory server and connection parameters. Active directory server is actually a cluster of four servers, say, serverdc01, serverdc02,serverdc03 and serverdc04. Each of these servers have their own root certificate with CN=serverdc01, CN=serverdc02 ..so on. So to set up SSL communication, I need to retrieve certificate of active directory and save it in WebSphere's trust store. When I retrieve certificate by putting AD server name, port and retrieve certificate I randomly get certificate of one of the serverdc01,serverdc02 ... Then I save that certificate to trust store. Question is : Do I have to save certificate from each of the serverdc01,serverdc02 ...in cluster to WebSphere's trust store? What are general strategies so that each server in the cluster does not require its own root certificate?

  Read the article

• Virtual machine on ubuntu

  - by MITHIYA MOIZ

  I have configured virtual machine on ubuntu with the help of below article, https://help.ubuntu.com/9.04/serverguide/C/libvirt.html I managed to finish all the part except the major portion getting virtual host to talk to real network, Which I guess should be done only via bridge interface. Via virtual machine manager I try to choose any interface it gives me interface not bridged When I try to bridge the interceface eth0 as below auto br0 iface br0 inet static address 192.168.0.223 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off I cannot communicate with this interface to network, host server looses all the communication to network. But when I remote bridge interface from /etc/network/interfaces And configure eth0 as below it works fine The primary network interface auto eth0 iface eth0 inet static address 192.168.0.223 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 dns-nameservers 62.215.6.51 gateway 192.168.0.1 how can i setup bridge interface correctly and how would my /etc/netwrok/interfaces file would look a like.

  Read the article

• Detecting/Reactivating serial port that becomes inactive on Ubuntu Linux 10.10

  - by Tom

  I am using a usb2serial port to communicate with some old equipment (using my code built upon the boost asio library - I think my code is fine because it works almost all of the time). Every so often (maybe once every few days) the communication stops with my device with no error at all - the device just does not respond. I then restart my computer and everything is fine again. Does anyone know where I can start to analyse this problem? My serial port loads up fine (in /dev/ttyUSB0) and the boost library does not throw an error. The device just does not respond. If I restart the device no change - only when I restart my pc does it make a difference. I have also tried unplugging and replugging the usb connector. Does anyone know what gets cleared in the reboot (w.r.t the serial device) or what I can probe when the problem happens again (rather than just restarting with hope)

  Read the article

• In Debian, how can I route rtorrent to a certain network interface, say ppp0?

  - by Timo

  I have purchased a PPTP account from StrongVPN and configured the setup by these (http://pptpclient.sourceforge.net/howto-debian.phtml#configure_by_hand) instructions and now I want to have rtorrent do its communication to the Internet through this VPN tunnel. So I have a ppp0 interface, which has the VPN tunnel. What is the next step? I guess it has something to do with the routing tables? I am new to routing, so please be elementary and precise so that I understand! Thank you!

  Read the article

• Exchange enrypted messages with a single recipient

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• How can I share a Windows 7 library with anonymous access without using a Homegroup?

  - by Triynko

  The "homegroup" feature is useless, because it requires a password, and therefore doesn't support anonymous, no-hassle access to shares from devices such as my Sony Bravia TV and non-Windows7 machines. So I turned off homegroup and reverted to the standard shared folders protocol. I'd like to share my Music "Library", so I can play files from my TV through the Surround Sound System, but there seems to be no option to share a library folder other than through a homegroup. I don't want to have to individually share the folders that belong to the library, because that would defeat the purposes of the library, which is to manage which folders are included in the library while also providing an easily accessible view of them all at once. Does anyone know how to share a Windows 7 library without that useless homegroup feature?

  Read the article

• VPN Error 868 when connecting even if using IP address

  - by Fr33dan

  I am trying to connect to a public VPN from VPNGate. However when I attempt to connect to a VPN from the list using MS-SSTP protocol I get the following error: Error 868: The remote connection was not made because the name of the remote access server did not resolve. If I open a command prompt and ping the address in question it resolves to the IP shown on the listing. If I configure the VPN using that IP address directly I still receive the error even though the name no longer needs to resolve. This was working yesterday but it seems the VPN I was using has been removed from the list. What is happening and how can I fix it?

  Read the article

• Nested RDP and ILO sessions, latency and keystroke repetition.

  - by ewwhite

  I'm working on a remote server installation entirely through ILO. Due to the software application and environment, my access is restricted to a Windows server that I must access through RDP. Going from that system to the target server is accomplished via HP ILO3. I'm trying to run a CentOS installation in an environment where I can't use a kickstart. I'm doing this via text mode, but the keystrokes are repeating randomly and it's difficult to select the proper installation options. I'm doing this using Microsoft's native RDP client (on Mac and Windows). I've also noticed this before when running installations or doing remote work in nested sessions. Is there a nice fix for this, or it it simply a function of the protocol?

  Read the article

• Laptop with internal serial port in 2009 (and 2010)

  - by Vincent Demeester

  Are there any computer vendors (like Dell, Lenovo, or..) that still sell laptops with an internal serial port? We are using several modem and other kind of box at work that have to be used (and/or programmed) with serial port (RS232, DB9, ..). We tried many usb/pcmcia serial adapter which run fine when used to load programs on the boxes but not with modems. The protocol behind the RTC connection (with modem) need timer we are not able to reach when using an adapter (maybe until we find a very good adapter), and that leads to my question..

  Read the article

• Updating Cisco VPN config to add vpnc support

  - by Igor Kuzmitshov

  I have a Cisco 1841 configured for VPN connections of two types: Peer-to-peer for partners' routers (IPsec) — using different crypto isakmp key and crypto map with set peer, set transform-set, match address for every peer (same map name, different priorities). That crypto map name is added to the WAN interface. Client access (PPTP) — using vpdn-group with accept-dialin protocol pptp. Now, a new partner wants to connect using vpnc client. The latter needs IPSec ID (group name) and IPSec secret in addition to username and password. I guess that IPSec secret is pre-shared key that can be specified in crypto isakmp key on Cisco. But I could not find any VPN tutorials involving groups. Hence, my questions: How to add IPSec ID (group name) and IPSec secret on Cisco router for vpnc connections? Should I add a new crypto map matching all addresses as well? Is it possible to add this configuration without breaking the existing setup? Thank you.

  Read the article

• Cisco IOS ACL types

  - by cjavapro

  The built in command help list displays access list types based on which range. router1(config)#access-list ? <1-99> IP standard access list <100-199> IP extended access list <1100-1199> Extended 48-bit MAC address access list <1300-1999> IP standard access list (expanded range) <200-299> Protocol type-code access list <2000-2699> IP extended access list (expanded range) <700-799> 48-bit MAC address access list dynamic-extended Extend the dynamic ACL absolute timer rate-limit Simple rate-limit specific access list router1(config)# What are each of the types? Can multiple types of ACLs be applied to a given interface?

  Read the article

• Microsoft Outlook x Lotus Notes in enterprise environment

  - by Ladislav Mrnka

  I'm working in company (several thousands client computers) using tools like MS Outlook + Exchange + Sharepoint + Communication server. Now our mother company shared the idea that everything should be moved to IBM Lotus Notes + Domino. The reason for this is that Outlook based solution is too expensive (it is the official statement even they don't want to replace MS Office yet). Other reason probably is that they received a lot of licences for Lotus when they bought IBM servers to new data center. My question is: Is this reasonable change or is it just some management game and IBM's marketing? Will it really save money? Other question: Is Lotus better then MS solution? This is serious question, it is not mentioned to open any kind of flame war. I just don't believe the decission and I have never used Lotus tools.

  Read the article

• W2k8 RC1: Windows Media Servers (WMS) as proxy

  - by da_didi

  (fullquote from stackoverflow.com/questions/2690788/w2k8-rc1-windows-media-servers-wms-as-proxy/2690791#2690791) I will have one streaming-server (W2k8, unknown streaming protocol [rtsp, mss, http]) and half dozen streaming-servers as proxies to save bandwidth. I have read the documentation and installed the modules, but I am unsure how I have to configure the proxy's according to http://technet.microsoft.com/de-de/library/ee126142(en-us,WS.10).aspx - as a proxy or reverse proxy and how I minimize the bandwidth needs between origin server and proxy's. What is the best way to realize my setup? Any short how-tos? How can I announce all players to use the proxy? Route all rtsp/mms/http-requests through my proxy? Announce the proxy with DHCP-releases? Thanks!

  Read the article

• Experiences using VLC for video-on-demand streaming? (VLM)

  - by StackedCrooked

  I'm considering my options for implementing a VOD service. Until recently my choices seemed to be either Wowza or Darwin, but now I discovered VLM, which looks really cool. I am going to stream MPEG4 H.264 video with AAC audio. I'm probably going to use the RTSP protocol, but I'm willing to use HTTP as well (after reading this article). Can anyone comment on his or her experiences with VLM? How does it compare to Darwin or Wowza? Is it stable and worthy of production use? Are there any limitations or performance problems?

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >