Search Results

Search found 6723 results on 269 pages for 'success anil'.

Page 110/269 | < Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >

• Problem setting up DL360G5 with scsi RAID

  - by ernelli

  I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

• Setting up NIS/NFS on Mac OS 10.6

  - by evan

  We have an Ubuntu NIS/NFS server at work and we recently got a few new iMacs. Is there a way to set them up so they can use the linux user accounts and mount the shared nfs files? Are there any guides on how to do this? I've been googling with no success. I tried getting NFS to work by connecting to the server via the Disk Utility but after I run 'sudo automount' from the command line and ls the directory I tried to mount it to (Volumes/nfs) it gives a permissions error. If there isn't a way to do this, anyone know of any not to complicated ways to share user accounts and files between mac and linux computers (and even hypothetically a windows computer one day?) I know its kind a of huge question, but I'll greatly appreciate any advice on the topic. Thanks!

  Read the article

• Efficient PuTTy workflow / configuration

  - by Adrian Ratnapala

  PuTTy is a fine SSH client, but how do you get a workflow managed as slickly as OpenSSH on Unix? My issues with PuTTy's management are: PuTTy tools are not in my PATH (easily fixable) PuTTy seems to have no equivalent of ~/.ssh, so I end have to manually choose locations for my keypairs, and then manually tell all the tools where to find them every time The private key's read permissions seem lax (I might be wrong about this, I a klutz on Windows). Pageant doesn't run by default (easily fixable?) Other programs don't reliably find pageant I suspect all of these problems can be fixed if I just get set my system up properly, and/or organise a nice workflow that fits into PuTTy's way of doing things. So can anyone share some success stories about managing PuTTy?

  Read the article

• Can't Install php5-dev on Ubuntu 12.04 running OpenVZ

  - by MEsch

  I'm trying to fetch the php apc package using pecl and running into a problem that I believe may be caused by OpenVZ. To do so I need php5-dev. When I try to install it via apt-get, I get this: php5-dev : Depends: libssl-dev but it is not going to be installed Depends: libtool (>= 2.2) but it is not going to be installed As I try to manually install dependencies (without success), I believe I've identified libc6-dev as the culprit. libc6-dev : Depends: libc6 (= 2.15-0ubuntu10.2) but 2.15-0ubuntu10+openvz0 is to be installed I have libc6 installed on the system. If it's any help here is my sources.list: deb http://archive.ubuntu.com/ubuntu precise main restricted universe deb http://archive.ubuntu.com/ubuntu precise-updates main restricted universe deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner This is a very frustrating problem, as I have other instances of Ubuntu 12.04 running just fine elsewhere (though not on OpenVZ).

  Read the article

• 284 GiB of data, 217.4 GiB of space

  - by Malfist

  I want to reinstall my OS, but I don't have the hard drive space to backup any more (I have a RAID 1 array, so I haven't done it for a while). In my /home I have 284.8 GiB of data, and I have a spare 250 GB (or 217.4 GiB) hard drive that I've been using for backup. What type of compression algorithm (if any) is capable of this type of compression? I don't care about the time, I have a quad core though, so something that utilizes all 4 cores would be great. I have tried 7zip with no success. Ran on one core for two days and failed because of lack of space. Any ideas?

  Read the article

• Why do I get "General Failure" when pinging host name on a Win 7 node on the network?

  - by hydroparadise

  This is a very peculiar problem with a station on our network. The client pc is running Windows 7 Pro. What makes this problem interesting is that this client is the only node on the network that seems to be experiencing this proglem. When I try to ping a specific Win 08 server by host name, I get an IPv6 address and get General failure. But when I ping it's IPv4 address, it responds just fine. My first thought would check the DNS server the name resolutions to see what would be going on, but the problem begs the quesion, why does the station get an IPv6 address back and fails as opposed to using the IPv4 settings (which are static btw). What gives? I am including a screen shot of trying the one specific server and failing while trying another server with success. All other nodes on the network don't have problems communicating with the server the one station is having issues with.

  Read the article

• Configuring port forwarding on Fortigate 50B

  - by GomoX

  I can't for the life of me get port forwarding to work on my Fortigate 50B. I followed the setup tips described on this other SF thread with no success. The only specific difference I can find is we are using load balancing through 2 different internet uplinks. Is there any caveat specific to this scenario that I might be missing? If you need any specific additional information please ask because I think I have checked everything: Virtual IP mapping on external interface wan1 ACCEPT all from any on wan1 to the corresponding server on internal No seeming offending firewall rules (any specific pitfalls that I might want to check for?)

  Read the article

• Emacs doesn't load gui.

  - by D Connors

  Hi, whenever I run emacs or emacs23 on terminal I just get the following output: ** (emacs:2620): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed And the gui doesn't load, and emacs' window never opens. The emacs process doesn't actually crash (the terminal stays busy, and I can see the emacs23 process running with ps -e). I've tried running it with the -D --debug-init arguments, but the same thing happens and the output is exactly the same. However, if I run emacs -nw it successfully runs emacs in terminal mode as if nothing were wrong. Strangely, this problem only started happening the second time I ran emacs today. The first time it worked perfectly fine. Since then, I've tried rebooting and I've tried purging the emacs installation, to no success. I haven't installed any new packages today, but I might have upgraded some, could that be the reason? Is there a way to find out which packages were installed/upgraded today? Thanks I'm running Ubuntu Lucid

  Read the article

• Reliable Backup Solution for Linux for Complete System Restoration

  - by Chris S

  What's the best backup solution for Linux that can completely restore the entire filesystem to a blank harddrive (including partitioning) after an old harddrive dies? I'm currently running a few Ubuntu machines, some with RAID-1 and others without RAID (mostly laptops). I'd like to implement a backup solution that can take incremental snapshots of the entire filesystem, so that if I were to replace all the harddrives in a machine, I could use the backup to restore a perfect copy of the previous filesystem. Unfortunately, nearly all the backup solutions I've found seem to be glorified rsync scripts, which only backup some files, and have no easy way to restore once the entire filesystem is gone. Some of the more complicated solutions, like Bacula, might do what I need, but require a complicated server/client setup and are notoriously difficult to maintain. I've heard that Apple's TimeMachine utility has this ability, and I've had similar success taking differential disk images with Acronis True Image on Windows, but of course neither of these work on Linux. Is there anything comparable for Ubuntu?

  Read the article

• Which WordPress plugin adds support for Java syntax highlighting? [closed]

  - by Bozho

  In wordpress.com-hosted blogs syntax highlighting is working, but on a newly privately installed WordPress blog it is not. So I assume there is a plugin for this. I tried wp-syntax and bbcode plugins - no success. So, which is this plugin, that allows programming language code to be highlighted: [code language="Java"] public class SomeClass {..} [/code] Update: I'm talking about the WordPress software, not the wordpress.com service. I was just giving an example (wordpress.com) of what is to be achieved.

  Read the article

• Cisco: unable to negotiate IP using IPCP with Windows server

  - by lnk

  I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

  Read the article

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• SQL 2008 publisher -> SQL 2000 subscriber: Is a pull subscription possible for merge replication?

  - by Brian Dunzweiler

  I am trying to synchronize a SQL 2000 SP4 subscriber to a SQL 2008 publisher via a merge pull subscription. When the subscriber tries to run the merge agent, it fails the following error: The process could not connect to Distributor 'OH05DBS002\SAM_SSG_2008'. SQL Server does not exist or access denied. Has anyone had success with this setup? I was able to create and synchronize a push subscription so I know that communication works between the two, at least from 2008-2000. The lack of communication from 2000-2008 also affects the ability to create a linked server on the SQL 2000 subscriber. One other tidbit - I did install the SQL 2008 native client on the the 2000 box but it didn't help either. Before anyone asks, I can't upgrade the subscriber as it still needs to support replication between MS Access 2003. Yeah, I know. :) TIA, Brian

  Read the article

• Outlook pst problem

  - by tking

  I've used outlook pst files in the past with great success. a few weeks ago I exported about 2 years worth of email into a pst file. size is around 1.5 gb. when i try ti import that pst back into my outlook it says its not a pst file. I've tried to repair it using pstscan and it repairs errors and will even mount it in Outlook but Outlook cant see any emails, like its an empty pst file. Is there any other way to recover my emails besides loading up backupexec and recovering my mailbox before i made the pst?

  Read the article

• Calling the LWRP from the Exception Handler

  - by Sarah Haskins

  Is it possible to call out to a Provider (LWRP) from a Chef Exception Handler? I think my Provider is out of scope, but I don't know if what I am trying to do is possible? or advisable? Here is my provider code (cookbooks/config/provider/signal.rb): action :failure do Chef::Log.info("Yeah success") end Here is my exception handler code (exception_handler/handlers/exceptionHandler.rb): require 'chef/handler' config_signal "signal" do action :nothing end class Chef class Handler class LogCollector < Chef::Handler notifies :failure, resources(:config_signal => signal) end end end Also, if anyone has a good recommendation for general reading about scope in the context of Chef I'd appreciate it.

  Read the article

• How can I copy files from a DVD skipping corrupt files?

  - by ujjain

  I have so far tried the following software solutions without success. Windows Explorer Copy (default) TeraCopy Roadkil's Unstoppable Copier Unstoppable Copier stops copying as a whole, it keeps continuing the same file after 20 minutes, despite any settings. I have spent much time Googling, but the one program ("Unstoppable Copier") that people recommended, did not to the trick as it keeps choking on the same file despite a setting of "Fasteset Data Recovery", "Maximum Retries 0" and "Undamaged Files First". The back side of the DVD has some scratches. What options do I have? I have access to both Ubuntu and Windows 7.

  Read the article

• AirPlay over unicast DNS-SD. Anyone got it working?

  - by Moduspwnens

  We set up AirPrint using unicast DNS-SD on our campus about a year ago and it turned out to be a big success, so we're looking at trying to get AirPlay working so our faculty and students can wirelessly show content on our classroom projectors. There are still a couple of other things preventing an ideal implementation (username and password authentication, for starters), but I've been trying to set up a working demo nonetheless. Getting AirPrint working was basically just a matter of advertising the same records over a DNS-SD domain instead of the multicast (.local) one, but doing the same thing for AirPlay doesn't seem to cut it. The devices don't recognize the DNS-SD AirPlay servers as available. I've uploaded a screenshot of my DNS-SD configuration with the original (from AirServer, which works normally for multicast) here. I realize this is still a fairly new feature and documentation is lacking, but has anyone been able to get AirPlay working via DNS-SD? If it simply only works over multicast, I can accept that, but its potential is so appealing for us that I thought it'd be worth asking if anyone else has figured it out.

  Read the article

• Problem in Installing Wordpress

  - by Hajloo

  I try to install Wordpress in a Windows Client with WebPI which provided by Microsoft. I had tostop installation process 3 time and installing PHP and mysql Extention manually. but everytime I continue setup by WebPi andfinally it show me a success message. But when I try to see installed wordpress in my client I see this Your PHP installation appears to be missing the MySQL extension which is required by WordPress. I asked it in StackOverFlow here but I couln't get the right answer. I install everything in **C:\Program files\** so these are the location C:\Program Files\MySQL\MySQL Server 5.1 C:\Program Files\Php C:\Program Files\ext mysql root password: admin wordpress database : wordpress wordpress database password : 123 here is my php.ini

  Read the article

• PHP file gets download instead of getting executed when browsed in any browser

  - by baltusaj

  I have a phpinfo.php file which I am trying to run by browsing to it using browser but the browser downloads the file instead of executing it. phpinfo.php <?php phpinfo(); ?> I followed following this post, added following lines to my /etc/apache2/httpd.conf and restarted apache but invain. phpinfo.php still gets downloaded. AddType application/x-httpd-php .php .phtml AddType application/x-httpd-php-source .phps Have I added these line to the correct file? On an openSuSE forum following was mentioned. I followed this too but still no success. Same problem is persisting. In case the browser wants to save your php files instead of displaying the content, you should enable php support in the /etc/apache2/mod_userdir.conf file. Add the following line to it, just after the line and restart the server. Include /etc/apache2/conf.d/php5.conf

  Read the article

• How can I get black window borders in Windows 8?

  - by sean e

  In Windows 8, when I go into Control Panel\Appearance and Personalization\Personalization\Window Color and Appearance the amount of control over window colors is greatly reduced as compared to Windows 7. The color controls do not allow you to make Window borders display in black. Is there some other way to set the window border color in Windows 8? Edit 1: Clearly the standard way does not work in Windows 8. The question is, is there another way? Perhaps through the registry for example? Edit 2: I tried copying the values in HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM from my Win7 system to the Win8 system without success (killing the 2 DWM processes after each change - they are automatically restarted and do use the new values).

  Read the article

• Inserting Keynote slides into a Pages document

  - by Ian Turner

  I have a number of training documents which are formed from a word processor file and a slideshow. I'd like to be able to keep them together, ideally by inserting the slides from Keynote into Pages. Is there any way of doing this quickly? So far I have tried Applescript with little success. I can drag and drop the slides one at a time but it is a bit slow, and I've tried turning the slideshow into and dragging it into Pages but this only pulls in the first slide. Does anyone have any better ideas?

  Read the article

• Calling LoadLibraryEx on ISAPI filter failed (v4.0.30319)

  - by rob

  I installed .Net 1.1 on a Windows Server 2008 (which already had .NET 4 installed). Afterwards, I started getting the following error: HTTP Error 500.0 - Internal Server Error Calling LoadLibraryEx on ISAPI filter "C:\Windows\Microsoft.NET\Framework\v4.0.30319\\aspnet_filter.dll" failed I have tried running aspnet_regiis without success. I have also tried the suggestions by Rick Strahl but to no avail. I have also removed .NET 4.0.30319 using the cleanup tool. When I reinstalled it, The error was still there. I have already removed 1.1 but still i get that error. Please help.

  Read the article

• 13-inch Macbook Pro Battery Not Charging

  - by hkhalidz

  I have a 13 inch Macbook Pro. From last night on, it says 'Battery Not Charging'. The charger's light is always green and if I remove the charger it turns off(means the battery is completely empty). I tried reseting the PRAM and SMC, but not dice. I also tried using different chargers with out any success. The Macbook Pro is from the new generations and is over a year old. The Power Information section indicates 458 for the Power Cycles. Any help would be greatly appreciated.

  Read the article

• "Play on another device" function not working with Samsung Allshare

  - by Tural Teyyuboglu

  Briefly I can't get work "Play on another device" function More detailed My Samsung TV (which support network) and PC are in the same network. The problem is, I can play PC contents from TV. But when I try to control TV remotely from Allshare software (PC), it shows TV only as connected device: But not as remote player in "players" list The result Tried to turn off firewall completely, reset router, re-install software. No success. Please help. BTW. On this link they kinda explained how to do it, but I software doesn' detect the TV as player in my case: http://www.samsung.com/global/allshare/pcsw/quickguide.html

  Read the article

< Previous Page | 106 107 108 109 110 111 112 113 114 115 116 117  | Next Page >