Search Results

Search found 73059 results on 2923 pages for 'system string'.

Page 1122/2923 | < Previous Page | 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129  | Next Page >

• CHKDSK always runs on Hyper-V image

  - by Dave

  I am having a problem with one of my VM's. Every time it boots, CHKDSK runs and finds no errors, but it goes into an endless loop (CHKDSK/Reboot/CHKDSK). The only way I can get Windows to boot is by cancelling the chkdsk. Is there any way I can tell windows to not do it? What do you guys suggest? Can't redo server. I guess it's also fair to say I get the following errors in Event Viewer "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2" "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:\" I only have 1 VHD attached, not sure what Volume 2 is. Thanks!

  Read the article

• weird postgresql log entries

  - by hyperboreean

  I am trying to figure out why I get some weird entries in my postgresql log after I do a restart: 2010-05-14 11:30:25 EEST LOG: database system was shut down at 2010-05-14 11:30:22 EEST 2010-05-14 11:30:25 EEST LOG: autovacuum launcher started 2010-05-14 11:30:25 EEST LOG: database system is ready to accept connections 2010-05-14 11:30:25 EEST LOG: incomplete startup packet 2010-05-14 11:30:40 EEST WARNING: there is already a transaction in progress 2010-05-14 11:30:40 EEST LOG: could not receive data from client: Connection reset by peer 2010-05-14 11:30:40 EEST LOG: unexpected EOF on client connection First, there's the 2010-05-14 11:30:25 EEST LOG: incomplete startup packet which bugs me. Anyone has any idea why this happens? And also, this one is very strange: 2010-05-14 11:30:40 EEST WARNING: there is already a transaction in progress ...

  Read the article

• How to change the HUDSON owner on ubuntu:

  - by Anil

  I am working with tomcat6 and HUDSON, when I run the hudson job it is running as tomcat6 user, what I want to know is there any way to change the HUDSON user as my system login user instead of tomcat6 so that I can run hudson job as my system user. I just want to know whether it is possible or not and why and how? I tired editing /etc/init.d/tomcat6 and changed tomcat6 user and grop as my login id, and the restarted the tomcat. Still the hudson jobs are running as tomcat6 user.Am i did the righ thing, if so why it is not working. Thanks in advance

  Read the article

• Where lies the soul of a computer?

  - by Christian

  When you take the system drive and put it in a new box, do you rename it or do you keep the name? And when you put a fresh drive in the old box, do you give it a new name? What is with upgrading? How many of the components do you have to change until a computer loses its identity? So a CPU is often described as the heart or the brain of a computer but where lies its soul? What determines its identity? The data on the system drive? The majority of its components? This might sound like a not-so-serious question and it probably is but whom of you didn't already face this problem?

  Read the article

• Altering policies in policy based management to look at even which happened only in last 24 hours

  - by Manjot

  Hi, I am using SQL server 2008 Standard edition. I am using Policy based management with policies which come with SQL server during installation. I want the policies to only look at events that happened in last 24 hours. For example for "Windows Event Log System Failure Error" policy if system restarted unexpectedly 5 days ago, i don't want to be alerted daily. Is there any way by which I can restrict a policy to look at events which happened in last 24 hours not older? Any help please? Thanks in advance.

  Read the article

• Hyper-V Ubuntu 10.04, Filesystem suddenly becomes Read-Only?

  - by Daniel Upton

  We are running a Ubuntu 10.04 VM on a Hyper-V system, The VM is dedicated to running one of our web applications. We have enabled the Hyper-V drivers in /etc/initramfs-tools/modules like so: hv_vmbus hv_storvsc hv_blkvsc hv_netvsc And updated the kernel image like so: $ update-initramfs -u And all was good... until.. This morning i got a support request that our web application was throwing an error 500, so i checked the logs and nothing was there. Then I remembered that I had seen this on another of our ubuntu servers so I... $ touch foo.txt And my suspicions were confirmed: touch: cannot touch `foo.txt': Read-only file system Why is the filesystem randomly becoming readonly? Is this only in Ubuntu on HV? Is it a problem on RedHat or Cent?

  Read the article

• Overwrite text in Windows Notepad

  - by Mark Miller

  I would like to be able to overwrite text in Windows Notepad. I am using Windows 7 Professional. Ideally I would like to be able to position the cursor next to a string of text and erase that text by pressing the spacebar until the cursor has passed over every character in the string without adding additional spaces to the document. Is that possible? I have tried pressing the 'Insert' key, but that does not help. Nor does using 'Num Lock' and pressing the 'Ins' or '0' key. Unfortunately, I have not been able to find a solution elsewhere on the internet. I do not think I am using notepad++. The application is listed as 'notepad.exe' under 'Properties'. Thank you for any suggestions.

  Read the article

• Is there way to scan a registry hive on an attached USB drive?

  - by johnny

  I have a hard drive with a virus that I removed from a PC. I can scan the file system of it as an attached USB drive. But how do I scan the registry of that USB drive since it is not booted up like a regular hard drive? Thank you EDIT: To clarify, the USB drive was a regular hard drive in a PC that got infected. I cannot boot into the OS to run a scan. I removed it to attach it to a working PC so I can scan its file system. But, I cannot scan the registry of that hard drive because that drive is not booted up. The hard drive was a regular XP hard drive install that I removed to scan as an attached drive (with an adapter to make it a USB drive.)

  Read the article

• Possible capacitor plague - need help identifying

  - by cornjuliox

  I've been having some PC power issues lately, and I think I've tracked it down to a bad power supply. Lately, when I'm on my PC it will often restart without warning, displaying "Hypertransport sync flood error occurred last boot." once POST finishes. I've googled the error, but can't come to a definitive conclusion as to what's causing it. I've seen posts suggesting that it might be a power supply issue, but nothing conclusive. Here's what I've done so far: -I haven't installed anything suspect within the last 3 months. -I do overclock just a tiny bit, so I tried raising the voltages a little. That didn't work so I brought both CPU multiplier and voltages all back to their default settings, but that didn't solve the problem either. The problem still occurs. -AV scanned the whole system, nothing suspect. -I suspected that it might be a bad power supply so I cracked that open and found the following: I think it might be cap plague, but I'm not sure. It looks more like glue TBH. Could someone help me figure out what might be wrong with this PC? EDIT: Sometimes, after these restarts, I noticed that the GPU fan doesn't spin up, and the single rear case fan that just happens to be connected to the same molex Y-cable as the GFX card doesn't spin up either. Anything to that? EDIT 2: I do use the system quite heavily, but I don't know how that will factor into this. I often play Diablo 3 and EVE Online at the same time, frequently alt-tabbing between the two. I also have Firefox open in the background, sometimes with several tabs, and if I feel like it, I'll mute the in-game sound and open foobar2000 for better music. Could it be that I'm just pushing this thing too hard? EDIT 3: I also noticed something odd. Right before I experience these restarts, my monitor would suffer from very faint lines of static moving across the screen. The monitor is still very much useable, but it is very annoying. Following the restart it disappears, and then would gradually re-appear over the next few days, and then restarts again. I find it to be very odd. System specs for good measure: Orion 600 W PSU AMD Athlon II X3 440 (overclocked to 3.14 ghZ, raised the CPU multiplier to x13 from x10) MSI G40-775 motherboard 1 GB inno3D GTX 550 ti 4 GB DDR3 RAM 500 GB Samsung SATA HD

  Read the article

• Resizing mysterious partition written by DDing an ISO file

  - by Jon

  I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Ubuntu: disable udev's persistent-net-generator.rules

  - by Luke404

  I'm using Ubuntu 12.04 LTS server edition and I am modifying /etc/udev/rules.d/70-persistent-net.rules to define my own mappings of ethernet interfaces to MAC addresses; that file is initially generated by rules in /lib/udev/rules.d/75-persistent-net-generator.rules at system installation time (or at the first boot, I actually don't know and it doesn't matter here). How can I be sure that my edited version will never ever be overwritten by anything? Removing the persistent-net-generator, as suggested on some websites, is not the Right Thing™ to do as told by comments in the file itself: it will be overwritten by any update of the udev package. I'm looking for a more formally correct way to disable it. Is it enough to just make sure that /etc/udev/rules.d/70-persistent-net.rules does exist? Maybe there are other events that could trigger its regeneration? (eg. adding or removing ethernet interfaces to the system?)

  Read the article

• How to write in a <array><dict> structure with defaults write?

  - by Hedge

  I've got a .plist-file with a structure like this: <plist version="1.0"> <array> <dict> <key>BundleIsVersionChecked</key> <false/> <key>BundleIsRelocatable</key> <false/> <key>BundleHasStrictIdentifier</key> <false/> <key>RootRelativeBundlePath</key> <string>value</string> </dict> </array> </plist> I want to add or edit the RootRelativeBundlePath-key with the defaults write command. Another possibility would be writing the whole plist-file but it has to be the same exact structure. How can I do this?

  Read the article

• Modifying %HOME% on Emacs 24.3 on Windows causes .emacs to not be found

  - by David

  In order for magit to read my git settings on Emacs 24.3.1 for Windows, I added the following configuration from a stack overflow post: (when (string-equal system-type "windows-nt") (setenv "HOME" (concat (getenv "HOMEDRIVE") (getenv "HOMEPATH"))) Interestingly, after this is added to my .emacs, Emacs thinks .emacs doesn't exist anymore. If I do M-x cd to ~ and then do M-x pwd it says ~ is located at C:\Users\Me\AppData\Roaming. It appears that emacs is reading the .emacs settings file because it loads my custom theme. However, if I try to find ~/.emacs Emacs doesn't see it. The file has all permissions on the file system for any user.

  Read the article

• Why does unpartitioned Hitachi HDS5C3020 drive start consuming 50% more power 15 minutes after boot?

  - by Pro Backup

  In a Debian 6.0.6 system there are 74 pieces of 2TB Toshiba DT01ABA200 drives. These drives are identified as Hitachi HDS5C3020BLE630 drives running firmware revision MZ4OAAB0. 64 Drives attached via HP SAS expander cards to an LSI 2008 SAS controller, another 5 drives are connected directly to the mainboard, 4 drives are connected to a Sil based PCI controller and last 1 drive is only powered and has no data cable connected. The controller LSI and Sil card's their onboard BIOS are both disabled and the mpt2sas and sata_sil modules are removed from the Linux debian 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux kernel. The mpt2sas module is loaded after boot using a modprobe command in /etc/rc.local. These 74 drives are not partitioned, neither formatted and also not mounted. The system consumes: with 0 drives: 70.6 - 70.9 Watt (also 15 minutes after boot); with 74 drives: 330 - 360 Watt, just after boot (is equivalent to 3.5 - 3.9W per drive in idle state); with 74 drives: 420 - 466 Watt, each time in the 15th minute of uptime (is equivalent to 4.7 - 5.3W per drive in idle state). The drive specification lists 4.7W as read/write, and 3.3W as idle power consumption. The increased power consumption is most likely on the 5V line, because after roughly 1 minute an "over current protection" (OCP) of the power supply (PSU) shuts down the power. The used PSU is a single rail model with an OCP of 122A on the 12V line and 55A on the 5V line. Regression: It doesn't matter whether the drive its APM value is set to disabled or 1 (maximum power saving). The operating system records no read/write activity in /proc/diskstats. The values there are identical (28 read, 0 write operations) as immediately after the modprobe operation. Can't test what happens when booting into the mainboard it's BIOS - to exclude any OS intervention - because the Super Micro X8SI6-F mainboard running firmware 06/27/12 has a bug that incorrectly reads a +74.0 C CPU sensor temperature as "High" in BIOS mode, and shuts down the power after 1 minute. What might be causing the drive read/write activity on all drives in the 15th minute after boot and how to prevent it from happening?

  Read the article

• Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

  - by William Hooper

  My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

  Read the article

• OS X Snow Leopard, change file permissions on copy

  - by Francesco K

  I work with OS X, Snow Leopard and need to allow users to make copies of files (templates) located in a read-only repository for subsequent editing. The repository is located on a separate physical drive mounted to the OS X boot volume. As this is a shared computer in a school environment, all users access the machine via a single login ("user_local"). Whether using POSIX permissions or ACLs, the use case requires the file permissions to change from "read" to "read write" as they get copied to the "user_local" home directory. Googling around has not yielded anything that would indicate that this is possible via the Snow Leopard permission system. Question 1: Is this in fact possible via the permission system? If so, how? Question 2: If not possible, how would one go about solving this problem? I imagine this to be a fairly common use case so there must be a workable solution for it out there. Thanks.

  Read the article

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• How to read a Text File Hidden Characters?

  - by balexandre

  I've created a text file from an application that I developed. When I send the text file to a SYSTEM Validation, they (3rd Party System) say that the file is invalid and that the file contains 3 characters in the beginning of the file that are not allowed as well special characters are not correct. They also say I need to use either ISO 8859-1 or PC850 Well, I'm using Notepad++ and I can't see that at all! What is the best text file reader for this kind of problems? EDITED I also have a Mac and just thought I remembered opening in TextMate ... WOW! Now I know what they are talking about! How can I have the same in Windows?

  Read the article

• How can I make gitosis distinguish between two users with the same username

  - by bryan kennedy

  I have a gitosis system that seems to be working correctly except for a common problem we run into where I can't distingush permissions between two users who have the same username, but different hosts. For example: [email protected] 's SSH key is in the key folder. And so is [email protected] 's SSH is also in the key folder. These two jsmith's are two different people on two different computers. However, when I configure them in the gitosis.conf file with the usernames jsmith@computer or jsmith@machine, it seems like each user just gets the same permission. Can gitosis not distinguish the full username (name and host)? If not, how do I deal with multiple users accessing our system with common usernames? Thanks for any help.

  Read the article

• Allow users to view Word documents only and not be able to edit, copy or save them.

  - by Alexander

  Hello In a traditional Windows Server 2003 environment with AD, we have shared a folder for our policy documents (MS Word). These documents get edited/updated now and then by the administrator(principal of college). Users only have read-only access to the folder, but they can still save-as and then change the content. Sharepoint is a possible solution but not easy to implement. We also thought of using a CMS on Linux and installing Joomla to let users only view the docs with a document management system... but is it possible to automatically retrieve the policy folder on the network and convert or put it in a format that users can only view and not copy? We also thought of saving the docs to secure pdf format but the principal wants an automated system. Basically she just wants to work in Word and the policies must be available to staff members on the network. Any ideas? Much appreciated.

  Read the article

• Can't escape single quotes in shell

  - by user13743

  I'm trying to make a command to do a perl substitution on a batch of php files in a directory. The string I want to replace has single quotes in it, and I can't get it to properly escape the in shell. I tried echoing the string with unescaped quotes, to see what perl would be getting: echo 's/require_once('include.constants.php');/require_once('include.constants.php');require_once("./functions/include.session.inc.php");/g' and it doesn't have the single-quotes in the result: s/require_once\(include.constants.php\);/require_once\(include.constants.php\);require_once\("\./functions/include\.session\.inc\.php"\);/g However, when I try to escape the single quotes: echo 's/require_once\(\'include\.constants\.php\'\);/require_once\(\'include\.constants\.php\'\);require_once\("\./functions/include\.session\.inc\.php"\);/g' I get the prompt to complete the command: > What I want it to parse to is this: What am I doing wrong? s/require_once\('include.constants.php'\);/require_once\('include.constants.php'\);require_once\("\./functions/include\.session\.inc\.php"\);/g

  Read the article

• WCF WebService: Client can't connect, as soon as request client cerficate is activated.

  - by Hinek

  I have an .NET 3.5 WCF WebService hostet in IIS 6 and using a SSL certificate. The communication between client and server works. Then I activate "request client certificate" and the client can't connect anymore Exception: System.ServiceModel.Security.SecurityNegotiationException: Could not establish secure channel for SSL/TLS with authority 'polizei-bv.stadt.hamburg.de'. Inner Exception: System.Net.WebException: The request was aborted: Could not create SSL/TLS secure channel. The certificate, the client uses is in the certificate store (local computer), the root ca is int the trusted root certification authorities store. Where can I check for an explanation on the server side? How can I check if the client really supplies it's certificate (client is not on my side)?

  Read the article

• Can I uninstall Qmail when I switch to Gmail Apps

  - by Saif Bechan

  I am not going to run a mail server anymore on my system. I am going to switch to Gmail. Can I then just uninstall Qmail or my previous mail server programm. I want to be able to send email from PHP. And I also want to get the email that Logwatch sends me from within the system. Basically, to have your server send email do you need an email server? Or will Gmail cover all of this.

  Read the article

< Previous Page | 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129  | Next Page >