Search Results

Search found 32459 results on 1299 pages for 'internet connection'.

Page 113/1299 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

• Sharing a wifi connection between different user profiles on Windows XP

  - by crowne

  I've set-up two separate user profiles on an old laptop running Windows-XP, and noted the following strange behaviour. When the wireless network is setup using WEP both user profiles can connect to the internet and I can switch between user profiles, without network connectivity issues. However when I changed the wireless security to WPA2, the first user to connect gets access to the internet, when switching to the second profile the connection fails. The behaviour is the same regardless of which of the two profiles logs on first. I also tried this with one user with admin rights and one without, and got the same result. I'm not too concerned about a fix for this other than forcing the users to log-off when sharing the laptop, but I'd be interested to know if anyone can corroborate my findings. The network config was done using Intel® PROSet/Wireless.

  Read the article

• VPN within a VM to allow for internet access on the host

  - by David Durrant

  I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

  Read the article

• Keep lan connection alive while going to sleep

  - by user18151

  Is it possible to keep lan connection alive when going to sleep? Although I would like a laptop independent(in general) answer, my laptop is Thinkpad T500 and the power manager shows in PCI options, the following three option regarding saving link state power: Off, moderate, maximum. Also instant resume apparently does something different, so that isn't much help either. I'm on Windows-7. Here's why: I'm a student, and currently I keep my laptop on almost all the time, but sometimes I sleep it and then I require to check something, so I turn it on. But then internet starts in at least a minute. So I avoid even putting it to sleep. I want that the internet connection should persist, so that I can put it to sleep to avoid power consumption.

  Read the article

• hyper-v server 2003 instance using internet connection sharing disconnects remote desktop to hyper-v host

  - by Joseph Southwell

  I have a windows server 2003 R2 instance running in a hyper-v instance on windows 8. I have setup an internal switch that uses internet connection sharing to get out to the internet. It works fine except for when I try to do windows update on the server 2003 instance it disconnects my remote desktop session to the windows 8 hyper-v host. When I reconnect it says windows update failed. I know that sounds crazy but I have tested it over and over again. If I change the instance to use my external switch (I have an external switch defined on another network adapter) windows update works fine.

  Read the article

• Mac: Script application downloaded from the Internet

  - by Svish

  I downloaded a php framework and has started to make a website using that. Sometimes I need to look at the source of that framework and every time I open a file I haven't opened before I get this message: “somefile.php” is a script application which was downloaded from the Internet. Are you sure you want to open it? That is ok and nice I suppose, but I am getting tired of it. Is there a way I can fix all the files in my web directory so that the os somehow forgets the files are from the Internet or something like that?

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• Ubuntu VPN Server (PPTPD) Configuration - Pass Traffic to Internet

  - by SnAzBaZ

  I am trying to configure PPTPD on my Ubuntu box to pass all VPN traffic through to it's internet connection, so I essentially want it to work like a Proxy. I think the problem is that no default gateway is being assigned to my PPTP client (Windows 7). I can connect to the VPN fine, I get an IP address and DNS servers but no default gateway. Do I need to configure a specific option to tell the VPN server to forward all traffic it receives down it's eth0 port and out to the internet. Thanks!

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

  - by jensendarren

  I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

  Read the article

• Suphp connection reset by peer in error logs

  - by trante

  In my Linux server's logs I have this record nearly every 5 minutes. I couldn't find the reason for two weeks and I would be very happy if you can recommend me a way to diagnose the problem. It is inside error_log file. I use php 5.3.8 and litespeed. 2012-09-03 16:01:28.399 [INFO] [95.7.223.91:63814-0#APVH_example.com] connection to [/tmp/lshttpd/ APVH_example.com_Suphp.sock. 781] on request #151, confirmed, 0, associated process: 845244, running: 0, error: Connection reset by peer!

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• After virus, Chrome & Internet Explorer won't connect to the internet, but Firefox works fine.

  - by Zack

  I cannot connect to the internet with Chrome or Internet Explorer. Firefox works fine. It seems it happens when I was infected by a "Trojan Horse Generic 17.BWIK", "Trojan Horse SHeur.UHL" and "Fake_Antispyware.FAH". I have removed the threats using AVG anti-virus security. I got Firefox working, but Chrome and IE still cannot connect. I do not want to loose Chrome History so re-setting would be my last option and uninstall and install will be out of the question. Is there a way around this? I am using XP Pro on a desktop and DSL connection.

  Read the article

• Wireless very slow on one laptop on network, all other machines normal?

  - by th3dude19

  My new laptop (Acer Aspire Timeine 3810TZ running Windows 7 Home Premium 64bit) is acting very strange on my wireless network. Below are the issues I'm noticing... The connection frequently drops. I see the icon change from 'full bars' to 'empty bars with yellow star (meaning no connection)' occasionally. Almost every website I visit (Firefox) hangs for a long time on 'Looking up www.amazon.com' for example. After a long pause, it finally starts loading the website. Neither of these problems exist on any other machines on my network. I also have a desktop running the same OS wirelessly and it works fine. I've run several Speedtest.net tests and the speeds are great (20MBit down/4 up). Results from pingtest.net are as follows: Line quality: D Ping: 46ms Jitter: 65ms Packet Loss: 9% These results are to a server that is less than 10 miles from my residence. The results on the other machines in my house are normal. Any suggestions? This is becoming very annoying as I purchased this machine primarily for browsing.

  Read the article

• Windows server 2008 R2 nas connection

  - by Msmit1993

  I am a student and i'm experimenting with my own home server running windows server 2008 R2. Now i have a NAS in my network an i can connect with it trough my server but only if i am on the administrator account. My own account is in the administrators group but can't establish a connection with the NAS unless the administrator account has already connected. How do i make my own account connect with the NAS without first connecting with the admin account. The error message on my account: An error occurred while reconnecting Y: to \NAS\Download Microsoft Windows Network: The user name could not be found. This connection has not been restored.

  Read the article

• tcpview cannot kill connection/process

  - by Stig

  I have a program that sometime misses to close a tcp connection. After the program has ended I can see that the port is taken. TCPViewer shows "non-existent" in the "Process" column. If i try to "End process" or "Close connection" nothing happens. If i reboot the server the port is released. But how can I tell Windows to release this port without a reboot? SOLUTION: It was dw20.exe (Microsoft Error Reporting) that was holding it back.

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• Internet Time tab has disappeared from the Date and Time applet of the Control Panel

  - by Robert Thornton

  Previously, there was an Internet Time tab on the Date and Time applet of the Control Panel, wherein one could force a query of an internet time server and also type in a different server from the ones supplied. However, this tab has now disappeared, and I need to have it back. I should mention that this machine has never been part of a domain, since it seems that machines that are such do not have such a tab. I should be obliged to anyone who can help me restore the missing tab. Windows 7 Home Premium Service Pack 1

  Read the article

• SSH connection falling down

  - by kappa

  I've set up a connection with autossh that creates some tunnels at system startup, but if I try to connect, after successful login (with RSA key) connection fall down, here a trace: debug1: Authentication succeeded (publickey). debug1: Remote connections from LOCALHOST:5006 forwarded to local address localhost:22 debug1: Remote connections from LOCALHOST:6006 forwarded to local address localhost:80 debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: remote forward success for: listen 5006, connect localhost:22 debug1: remote forward success for: listen 6006, connect localhost:80 debug1: All remote forwarding requests processed debug1: Sending environment. debug1: Sending env LANG = it_IT.UTF-8 debug1: Sending env LC_CTYPE = en_US.UTF-8 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Transferred: sent 2400, received 2312 bytes, in 1.3 seconds Bytes per second: sent 1904.2, received 1834.4 debug1: Exit status 1 What can be the problem? All this stuff is managed by a script already running on another machine (creating reverse tunnels on the same machine but with different ports)

  Read the article

• HDMI connection does not support HDCP

  - by mroggi

  Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

  Read the article

• Server not accepting uploads

  - by Tatu Ulmanen

  I'm having a strange problem with my VPS: I can download files from it, I can use PuTTy to connect to it and all behaves normally. But sometimes, when I try to upload a file to the server or save a file via SFTP, the connection inexplicably fails. I am using jEdit to edit files remotely via SFTP. When it works, it works fine. When it doesn't, I get an error message: Cannot save: java.io.IOException: inputstream is closed Cannot save: java.io.IOException: 4: I can see that a temporary save file (#file.php#save#) is created on the server with a filesize of 0. So the connection works, but when it comes to sending the actual data, something fails. The same thing with WinSCP, but the error is different: Copying file fatally failed. Copying files to remote side failed. And I can always browse the server with PuTTy without a problem. I see nothing abnormal in any log files. Auth.log shows this when I try to save: sshd[32638]: Accepted password for - from - port 62272 ssh2 sshd[32638]: pam_unix(sshd:session): session opened for user - by (uid=0) sshd[32640]: subsystem request for sftp sshd[32638]: pam_unix(sshd:session): session closed for user - When I wait for a while (say, an hour), everything works fine again. It can't be a temporary ban, as I am still allowed to connect to the server, right? I know this may not be enough info to solve the problem, but I am grateful for any clues or bits of information that might help me. What are the possible causes for this kind of behaviour, what log files can I check for clues etc.. I'm running out of ideas!

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

  - by Gary

  I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

  Read the article

• Ubuntu 11.10 firewall/gateway - no client internet access

  - by Siriss

  I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

  Read the article

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• How to reinstall OS X 10.8 without internet?

  - by Sam

  I had a crash on my Macbook Air MD231 - Mid 2012, and my system won't boot, and unfortunately my friend erase my partition from disk utility. Now I have three question 1)my internet speed is very low, for re-installing I have to download all of the OS X 10.8 from internet? or I can download it and install it via USB port?(how??) 2)I have to select this option ? "re-install OS X" , and what about size of that? (for example 4.2 Gb) 3)after installing , is there anyway to restore my dada? unfortunately I have not any backup right now, after I turning my Mac on, it's automatically going to repair mode... thnx for your kind

  Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >