Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 113/783 | < Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >

  • XP Mode as a server, Win 7 as a client

    - by Spyro
    I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

    Read the article

  • C Programming Language and UNIX Pioneer Passes Away

    According to a statement given to the New York Times by Ritchie's brother Bill, Dennis Ritchie was living alone at his home in Berkeley Heights, New Jersey, prior to his death. Richie's health had reportedly deteriorated, and his last years were made difficult by the after effects of treatments for prostate cancer and heart disease. In addition to his brother Bill, Ritchie is survived by his sister Lynn and his other brother John. Dennis Ritchie was born in Bronxville, New York, in 1941. His father was an engineer with Bell Labs and his mother was a homemaker. His family eventually moved...

    Read the article

  • Hostname problems in CentOS 5.5

    - by spoon16
    I just set up a CentOS 5.5 machine on my local network and attempted to modify the hostname by editing /etc/sysconfig/network file. When I'm logged in locally the change to the hostname is reflected and seems to be working fine. When I open a SSH session via PuTTY from Windows this is what I see at the prompt: [root@? ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=mini.local [root@? ~]# sysctl kernel.hostname kernel.hostname = ? [root@? ~]# hostname ? [root@? ~]# hostname -f hostname: Unknown server error A couple of other symptoms that may be helpful in troubleshooting this problem. I can ping the CentOS box from my Windows machine via IP but not hostname. Also, my Netgear router does not display the hostname when I view the "Connected Devices", I do see the mac address and the proper IP listed though. How can I make it so that the hostname is properly propagated throughout my network?

    Read the article

  • Community Programming

    - by James Hill
    Background I just began working for a religious non-profit organization. As with most non-profits, the organization is resource-poor and has no IT department to speak of. In my two months here I've received 20 requests for websites, apps, and internal automation. Many of these 20 requests have merit and would benefit the organization. I'm a .net web developer and as such the open source community is relatively foreign to me... Question For the sake of this question, lets say I'm talking about building a single, large, website. Does software (web based, hopefully) exist that would allow me to post requirements and assets (graphics and CSS) for a site, and then invite programmers to participate in the sites development? As a simple example, I could post the requirements and data for the about us page and an individual would indicate that they could/would fulfill the requirement. Upon completion, they could upload the new source code to the shared repository (github).

    Read the article

  • ubuntu server 10 - slow and can't remove desktop environment

    - by Alex
    i'm running ubuntu server 10.10 with the desktop environment. simple page requests are taking over 5 seconds even when connecting to the server through our local network. i believe this is partially related to having the desktop environment installed, as the server worked faster (but not as fast as it should considering that it's on the local network), but tasksel fails every time (aptitude failed 100). my knowledge of networking and linux in general is limited. would really appreciate ideas on how i can troubleshoot this problem. oh also, in the system monitor, one of the processors is almost always around 100%. i doubt this is normal too....

    Read the article

  • Automatically generated /etc/hosts is wrong

    - by Niels Basjes
    I've created a kickstart script to install CentOS 5.5 (32bit) in a fully automated way. The DNS/DHCP setup correctly gives the system the right hostname in both the forward and reverse lookups. dig node4.mydomain.com. +short 10.10.10.64 dig -x 10.10.10.64 +short node4.mydomain.com. In the state the installed system is right after the installation completed is as follows: cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes GATEWAY=10.10.10.1 HOSTNAME=node4.mydomain.com echo ${HOSTNAME} node4.mydomain.com cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 10.10.10.64 node4 My problem is that this automatically generated hosts file is slightly different from the way I want it (or better: the way Hadoop wants it). The last line should look like this: 10.10.10.64 node4.mydomain.com node4 What do I modify where to fix this? Thanks.

    Read the article

  • How can I fix my Virtual PC 2007 network configuration

    - by DanJ
    Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

    Read the article

  • Good text editor for Ruby on Rails programming?

    - by Andrew
    I'm trying to find a text editor that I can use for doing Ruby on Rails development. I have been using TextMate on my Mac and would love to find something that even comes close to that experience. My Ubuntu laptop is a little old, and doesn't have a lot of memory, so I need something lightweight. I don't need/want a bloated IDE because the performance on my slow laptop would be terrible. It would be nice if this text editor had: Syntax highlighting A project/file browser view to be able to open files in my project Keyboard shortcuts (don't need them as much)

    Read the article

  • VPN: What should my Gateway remote ID be?

    - by Lynn Owens
    I have a Netgear ProSafe UTM. I set the Gateway local ID to it's WAN IP. But I'm not sure what to put for it's Remote ID. I want to be able to connect to it from a laptop across the internet. I can chose between: Remote IP FQDN Client FQDN Cert DN Frankly I've tried them messing around with them all but I'm just shooting in the dark, and the help desk docs are worthless. Also, Googling around seems to end up with lots of pages not really related to what I want. A lot of pages on configuring Cisco or Windows home networking or privacy advocates.

    Read the article

  • C Programming matrix

    - by Bilal Khan
    In this program the user enters the # of columns of the matrix and then the entries of the matrix. So, for example, if the user enters 2 for column # and 1 2 3 4 for entries then the program develops a 2 by 2 matrix with 1 2 3 4 as entries. My program works perfectly in such a case. However, if the user for example had only entered 1 2 3 then my program makes a matrix with garbage values. I would like the program in such a case to exit the program. It is a simple question, but it has me baffled. #include<stdio.h> #include<stdlib.h> int main() { int m,x, n, c = 0, d,k, matrix[10][10], transpose[10][10], product[10][10]; printf("Enter the number of columns of matrix "); scanf("%d",&m); if(m<=0){ printf("You entered a invalid value."); exit(0); } else{ printf("Enter the elements of matrix \n"); for( c = 0 ; c < 10 ; c++ ) { for( d = 0 ; d < m ; d++ ) { scanf("%d",&matrix[c][d]); if (matrix[c][d] == 99) // 'x' is character variable I declared to use as a break break; // c = c+1; } if (matrix[c][d] == 99) break; } } printf("\nHere is your matrix:\n"); int i; for(i=0;i<c;i++) { for(d=0;d<m;d++) { printf("%3d ",matrix[i][d]); } printf("\n"); }

    Read the article

  • How to enable printer settings over Jetdirect on HP 4100N

    - by zsero
    I have a HP 4100N printer and I am using it over network. Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want. There should be a supplies, config, print info, etc. page, what are not visible now. Can you tell me what setting should I set to enable this printer config page on the webserver? The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).

    Read the article

  • implementation of text editor in shell programming

    - by Arka Ghosh
    i have made a text editor in C. when i am changing the extension of that file from .c to .sh and compiling the file in the terminal,some error is shown,like for the global variables an external error is shown,and for the functions i have declared errors are shown there also.please help me to solve this. I am sending my code.. include include include int i,j,ec,fg,ec2; char fn[20],e,c,d; FILE *fp1,*fp2,fp; void Create(); void Append(); void Delete(); void Display(); int main() { do { printf("\n\t\t** TEXT EDITOR *"); printf("\n\n\tMENU:\n\t..\n "); printf("\n\t1.CREATE\n\t2.DISPLAY\n\t3.APPEND\n\t4.DELETE\n\t5.EXIT\n"); printf("\n\tEnter your choice: "); scanf("%d",&ec); switch(ec) { case 1: Create(); break; case 2: Display(); break; case 3: Append(); break; case 4: Delete(); break; case 5: exit(1); } }while(1); } void Create() { fp1=fopen("temp.txt","w"); printf("\n\tEnter the text and press '.' to save\n\n\t"); while(1) { c=getchar(); fputc(c,fp1); if(c == '.') { fclose(fp1); printf("\n\tEnter then new filename: "); scanf("%s",fn); fp1=fopen("temp.txt","r"); fp2=fopen(fn,"w"); while(!feof(fp1)) { c=getc(fp1); putc(c,fp2); } fclose(fp2); break; }} } void Display() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end1; } while(!feof(fp1)) { c=getc(fp1); printf("%c",c); } end1: fclose(fp1); printf("\n\n\tPress any key to continue.."); } void Delete() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end2; } fclose(fp1); if(remove(fn)==0) { printf("\n\n\tFile has been deleted successfully!"); goto end2; } else printf("\n\tError!\n"); end2: printf("\n\n\tPress any key to continue.."); getchar(); } void Append() { printf("\n\tEnter the file name: "); scanf("%s",fn); fp1=fopen(fn,"r"); if(fp1==NULL) { printf("\n\tFile not found!"); goto end3; } while(!feof(fp1)) { c=getc(fp1); printf("%c",c); } fclose(fp1); printf("\n\tType the text and press 'Ctrl+s' to append.\n"); fp1=fopen(fn,"a"); while(1) { c=getchar(); if(c==19) goto end3; if(c==13) { d='\n'; fputc(d,fp1); } else { fputc(c,fp1); } } end3: fclose(fp1); }

    Read the article

  • Connect to wired and wireless networks at same time, Ubuntu

    - by Gary Chambers
    Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

    Read the article

  • Use dns suffixes only on certain wireless networks?

    - by eidylon
    Hello all, quick question. I'm a software guy and networking is all black magic to me! I have a laptop which I use at home and at the office. In order to be able to more easily reference our servers at work, I have our domain name in the DNS suffixes on my TCP/IP settings on my wireless connection. This all works beautifully and I can reference our servers simply by name only. Now the problem... When I go home, it still has those suffixes in there, and I cannot access other servers because it appends the DNS suffixes to the server names. Is there a way I can set up DNS suffixes so that they are only applied when connected to a certain wireless network (I'm thinking by SSID).

    Read the article

  • setting up delegate or smtp forwarding

    - by cotiso
    for work we have a remote dedicated server to run our webservice that also runs our email services, at home(comcast residential internet) i cannot send mail using the dedicated server's SMTP, comcast spits back a error saying i can only use their SMTP server for sending mail at work(comcast business internet) we can use our dedicated server for sending mail with no problem so i set up a box at work to forward smtp traffic, i'm new to all this networking stuff by the way i used delegate to forward smtp traffic, can someone point me in the right direction on how to use this program(delegate) to fix our issue the delegate command i used to test is : delegated -P25 SERVER="smtp://dedicated.server.com:25" PERMIT=":::" -v i also opened up port 25 on the router so it points to my boxes ip are there any other ways to fool comcast into thinking im using my works ip to send mail, my coworkers and i are unable to send mail from home for some time now thanks

    Read the article

  • Where to look for a programming partner?

    - by David
    Say that you want to start a new project (I'm talking about a serious project — e.g if you had an idea that seems good and profitable — not about something you start just to learn a new technology or just for your enjoyment) but you don't feel like you can do it alone since, for example, you lack the experience or the technical skills to go through all the phases needed to go from the idea to the final product. Say also that you don't simply want to hire someone. You want someone who can be as passionate as you in the job, that is “proficient” in and enthusiast of the same technologies as you are and that possibly has a background similar to yours (e.g. you both are students, you both come from a prestigious univerity or just you're both Star Trek nerds). So, basically you don't want a person to tell what to do (e.g. “implement this and that, slave!”) but someone who can be inspiring and bring something new and important to your project. Someone to go with you from the earliest stage — from clearly shaping the project's philosophy to drawing mockups etc. Someone who agrees to share the outcome of the project, that strongly believes in the idea behind it and is completely 50-50 with you. Now the question is: how to improve your chances of finding this person (or persons)? Where would you look at first? For example, if you had a lot of funds and were looking for someone to hire, you'd maybe post an ad in SO careers or jobs.73signals; if you already had a team and were looking for funding, you'd start a project on kickstarter or indiegogo, or you'd go to some startup event. But if you had to find a good partner (and programmer, of course) for you're project, where would you start looking? Which strategies would you use?

    Read the article

  • Is `break` and `continue` bad programming practice?

    - by Mikhail
    My boss keeps mentioning nonchalantly that bad programmers use break and continue in loops. I use them all the time because they make sense; let me show you the inspiration: function verify(object) { if (object->value < 0) return false; if (object->value > object->max_value) return false; if (object->name == "") return false; ... } The point here is that first the function checks that the conditions are correct, then executes the actual functionality. IMO same applies with loops: while (primary_condition) { if (loop_count > 1000) break; if (time_exect > 3600) break; if (this->data == "undefined") continue; if (this->skip == true) continue; ... } I think this makes it easier to read & debug; but I also don't see a downside. Please comment.

    Read the article

  • How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

    - by David Siegel
    How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

    Read the article

  • cannot access my own computer through My Network Places

    - by vgv8
    My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

    Read the article

  • Where can I find programming work online ?

    - by explorest
    I have setup an ideal, quiet, non-interrupting environment at home. I am extremely productive here. I dont want to leave my home, not my room, not even my couch. How/where do I find work online so that I don't have to travel to it? Kindly post about your own personal experiences. Have you done it full time from home? Where and how? I am outside United States in a third world country so a lower pay is not an issue. The issue is the work-enviroment.

    Read the article

  • how do we clear new programming concept

    - by Sarang
    In IT world, new latest technologies are generated daily. Every time, every programmer need to learn something & then clear it conceptually to implement. All new technologies are built on some basic concepts. But, these technologies have their own area of development & a developer is supposed to grasp it from very basic. This seems like starting from very beginning to reach till current. What is the best & fast way to learn and grasp a new developed technology ?

    Read the article

  • Resources for Virtual Machine programming

    - by good_computer
    I am a beginner (a little more than that) programmer of C. I am really interested in the field of Virtual Machines. When I read about the Python VM, the PyPy project, the advancements in JVM technology, Google V8, the Erlang VM, I really get excited about these amazing pieces of technology, and really want to get my hands dirty building them or contributing to one of these projects. I need to know.. what are the things (language, concepts, algorithms, math, etc?) I need to know/learn to be able to build a virtual machine any books or other resources that will be helpful career prospects for a virtual machine engineer (but this is least important for me for now) (one more side question: somewhere I'd read something like JVM is on the cutting edge of virtual machine technology -- that it is the most advanced VM so far -- is that true?) Please give me a LONG answer detailing all that you know.

    Read the article

  • Basic Defensive Database Programming Techniques

    We can all recognize good-quality database code: It doesn't break with every change in the server's configuration, or on upgrade. It isn't affected by concurrent usage, or high workload. In an extract from his forthcoming book, Alex explains just how to go about producing resilient TSQL code that works, and carries on working.

    Read the article

< Previous Page | 109 110 111 112 113 114 115 116 117 118 119 120  | Next Page >