Search Results

Search found 97876 results on 3916 pages for 'user folder'.

Page 1131/3916 | < Previous Page | 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138  | Next Page >

  • Melting plastic around DC-in jack in laptop

    - by Ove
    I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

    Read the article

  • "Automatically Connect" option for Mobile Broadband crashes GNOME Shell, how to remove network configurations?

    - by Kush
    I'm using Fedora 15, in GNOME Shell, my mobile broadband connection was working absolutely fine, until I set the connection type to Connect Automatically using nm-connection-manager. Now, when I start the Fedora, the Top panel network icon shows red exclamation symbol and when I click it, instead of showing me available networks' list, it shows only "Network Settings", and when I open it, it shows GNOME 3's new Network Manager app, and it pops out the dialog saying that, "Current network settings service is incompatible with this version". And after a few seconds of log in, the shell freezes and all I can do is log out using Ctrl+Alt+BackSpace. I'm facing this problem since I opened old network manager app using nm-connection-manager in the run dialog, and editing my connection to connect automatically. After logging in to the shell I somehow managed to delete that connection from the same app and created a new one, but the problem still exists. How can I delete all network preferences (by deleting its configuration files from my home directory or something like that) and reset the GNOME 3's network manager to its default state?

    Read the article

  • NTFS partition size not recognized after disaster recovery clone

    - by djechelon
    I'm in the middle of a disaster recovery of a 250GB hard disk that was "clicking". Obviously I didn't have a backup copy. I managed to salvage all the files thanks to GParted Live that was able to read the disk without a single "click" sound. So I cloned the partition to a new drive sized 500GB. Unfortunately, GParted process went to some kind of infinite loop, disks stopped I/O and after a couple of hours I interrupted the clone process I started. Now the problem is: when cloning the partition I also chose to expand 250GB to the whole 500GB of the target disk. Windows sees the partition sized 500GB in computer management, but Windows Explorer only sees 250. chkdsk e: /f says the filesystem is OK. How can I repair the file system and let Windows see the full 500GB of the new partition? An alternate idea is to deep-copy the files from the backup disk to a newly formatted disk. This should definitely fix. Any other ideas?

    Read the article

  • Recovering a word file (Select the encoding that makes your document readable)

    - by HOY
    My girlfriend requested me to recover a word file which is her 2 months of work :(, and this is her thesis for graduation. It shows the "Select the encoding that makes your document readable" screen when I tried to open it, I tried 2 recovery tools but didn't work. File can be downloaded from the below link. http://s3.dosya.tc/server3/bmu4bi/glava.doc.html I kindly request your help. *The history of the issue*** she said she was copy pasting from other files while creating this file(she copy pasted from a pdf too). 2 days ago she opened the file in company pc and worked on it. Wrote 2 pages and saved. Next morning she could not open it. it is possible that an error occured when saving. the computer she worked freezes sometimes , when she was working there was a file in usb she plug out and in it and continue to work. then saved.

    Read the article

  • Is there a way to unhook a global hotkey in windows?

    - by jonfuller
    I'm running Windows 7, and I installed an application that installed a global hot key (ctrl+shift+space) which conflicts with another application (Visual Studio) that uses that hotkey (though, not globally, only applications specific). The question is, knowing which application it is (ScanSnap Manager) and that it doesn't have a setting to turn off the hot key, is there a way I disable it through Windows somehow? Thanks!

    Read the article

  • batch update SharePoint data

    - by Faiz
    Hi, I need to import user profile information to a sharepoint list. Also, the user profile information will be periodically updated to the list , therefore i think i should use a timer job to update the information. Importing for the first time works without any issues. But can you suggest what can be the best way to update information. The update should take care of updating existing records in profile , mark as orphaned for the records that are deleted from user profile and add new records in user profile to the list. Thanks

    Read the article

  • Is there a mousegestures add-on for Google Chrome?

    - by kgrad
    With the release of chrome 3.0 I am again considering switching to chrome as my default browser. The only thing stopping me, and it has been stopping me since chrome 1 came out, is the lack of the mousegestures add-on that i have in firefox. Mouse Gestures have become so routine for me that I simply can't use another browser that doesn't have them. There are ways to kinda emulate mouse gestures using 3rd party programs like gmote but they are not the same and not quite as good. I know that chrome developer has add-ins but I havent been able to find a mouse-gestures one. I'm fairly confident that many people want one. So, does a mousegestures add-on exist for chrome? bonus points if there is a firebug/xmarks add-in as well! thanks.

    Read the article

  • How to calibrate a HDTV that is being used as monitor?

    - by Mike
    I have a HDTV I am using as a second monitor. The first monitor, is a real computer monitor, not a TV and has a fantastic image. The second one, the HDTV has a good image, but it is a little bit blurred and has the problem you can see on the picture below, a kind of red halo around the edges. I think it has something to do with red contrast. Other colors show this problem too, specially the green. The problem is that the TV has no contrast adjustment. Instead it has something called IRE 10 points and IRE 2 points. Taking IRE 10 for example, it has 4 controls for each of the 10 points: luminosity, R, G and B. I could not find a page where I can understand what this IRE is and how should I adjust this. Can someone tell me how should I proceed to calibrate this TV for best picture? thanks for any help.

    Read the article

  • Drive Genius says: "Invalid catalog btree reverse link in node" is this fixable?

    - by bencnscp
    No obvious problems with my Mac OS X 10.5 system, but Drive Genius 1.5.1 says: "Invalid catalog btree reverse link in node" when doing a "Verify" The "repair" and "rebuild" options fail. I did some googling, and the consensus as: 1- Drive Genius is slightly better than Disk Warrior 2- This problem is likely not fixable. My assumed solution is that I should do a full backup and re-format.

    Read the article

  • alternatives to altaris/symentec SVS

    - by The Journeyman geek
    I use an old copy of altaris SVS (link to lifehacker - symentec gutted the old altaris website) for testing applications - it lets me capture the changes one executable makes, or changes to a whole system into a bundle, and remove the whole bundle once i'm done. However symentec bought over altaris and apparently killed off the product, or merged it into some other bigger product. I'd like the same fine grained control SVS had, something that just does this, and preferably free (for personal use) or not too expensive. I'd like this to run on at least windows XP 32 bit, but windows 7 and 64 bit support would be nice too

    Read the article

  • USB mouse connecting and disconnecting randomly

    - by Kalec
    I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only. To move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts. Sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurrence. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but I can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing. Most I have done is get rid of the 12 disconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing. ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work. Think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open #### EDIT 2 Now it works again, I can't explain this. Still thinking of getting a new one though

    Read the article

  • SkyDrive doesn't sync in Windows 8.1

    - by Zong Li
    After upgrading from Windows 8 Pro to 8.1, I moved many files to the integrated SkyDrive directory. Everything worked just fine, until recently, where SkyDrive has simply refused to sync. The only exceptions are Office documents, which are synced via another mechanism. When I add files to the SkyDrive redirectory, they show up as Pending in the metro app indefinitely. When I try to make them online only I get the following error: Sorry, the action couldn't be completed because the file hasn't finished uploading. Try again later. Of course, the files do not show up online. When I go the other way, and try to upload files online, they are also not synced to my local SkyDrive directory.

    Read the article

  • Linux route add between static LAN and Wifi Gateway

    - by Hamza
    I have two local machines connected to each other via wired ethernet and one of those machines is also connected to a wifi network which provides internet access. A pseudo-graphical representation of the topology is as follows: (PC2)----------(PC1)---------(Wifi Gateway) 192.168.2.x 10.0.0.x The configuration on PC2 is: iface eth0 inet static address 192.168.2.2 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 ...and the configuration on PC1 is: iface eth0 inet static address 192.168.2.1 network 192.168.2.0 netmask 255.255.255.0 gateway 192.168.2.1 On PC1, I've added a default route for wlan0 as I couldn't access the internet otherwise: route add default gw 10.0.0.1 wlan0 And also tried setting the gateway for the 192.168.2.x network using: route add -net 192.168.2.0 netmask 255.255.255.0 gw 10.0.0.1 But I still can't access internet from PC2. Edit I don't have access to the wifi gateway.

    Read the article

  • VMware - I/O error - how to fix?

    - by Maya-G
    I'm running XP pro on VMware - it mounts and runs just fine. However, if I power down the VM and try to copy it, or even if I try to do a simple Mac Backup (using Carbon Copy Cloner), I get an i/o error at one very specific VMDK file. Here's a sample of the error - this from CCC: "12/20 22:49:30 Detected input/output error 12/20 22:49:33 rsync: read errors mapping "/Users/blahblah/Documents/Virtual Machines.localized/WindowsXP-Professional150G.vmwarevm/WindowsXP-Professional150G-000001-s065.vmdk": Input/output error (5)" How can I regain my ability to do backups of my Mac without this I/O error?

    Read the article

  • Can 'screen' grab an existing process and tie itself to it?

    - by warren
    Scenario: Started a process that's going to take "a while" to complete outside of screen. Need to leave the terminal / netowrk hiccups Process lost Would be nice if: Started a process outside of screen Realize error Run screen <magic-goes-here> and it grabs the active process to itself From the man pages and --help info, I don't see a way this can be done. Is this possible directly with screen? If not, is it possible to change the owning shell of a process, so that the bash (or other shell of your choosing) instance inside screen can have a command run which will change the parent shell of the initial process to itself from the originator?

    Read the article

  • Windows 7 SSD optimizations applied when?

    - by Greg Hurlman
    I've got a Windows 7 install running on my laptop, and will be upgrading to an SSD shortly. If I take a Windows system image backup from my current HD, and restore it to my SSD, will I get the SSD optimizations, or does Windows do those checks during the install? If so, is there some way I can force Windows to recheck and/or act accordingly?

    Read the article

  • How to check for duplicate files?

    - by miorel
    I have an external hard drive on which I have backed up files several times. Some files were modified between backups, others were not. Some may have been renamed. Now I'm running out of space, and I'd like to clean up duplicate files. My idea was to md5sum every file on the drive, then look for duplicates, and diff the relevant files (just in case, haha). Is this the best way to do this? What are some other methods of checking for duplicate files?

    Read the article

  • drive not showing in Windows setup

    - by Binu V
    Hi, I accidentally formatted my OEM drive of M DELL Inspiron. After that I could not install Windows 7 on my laptop. Because the partitions of my hard disk are not showing to select an install drive. I downloaded the RAID driver from the Dell Support website for my laptop, but the driver is showing and I loaded the driver from a pen drive. But it's still not showing the drives.

    Read the article

  • What would make a noise in a PC on graphics operations on a passively-cooled system?

    - by T.J. Crowder
    I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

    Read the article

  • Make favorites always visible in Windows Explorer

    - by gix
    Vista introduced the favorites in the navigation pane of Windows Explorer. In Windows 7 I immediately noticed that the favorites don't have a separate pane at the top anymore. See this image for a comparison. So to access the favorites (which I do a lot, I love that feature!) I always have to scroll to the top first which is quite annoying. Is there any way to restore the old behavior? I can't believe that they went a step backwards here.

    Read the article

  • Windows Server 2008 R2 and OSX 10.5/.6/.7, Search, Spotlight

    - by Keith Loughnane
    I'm handling a migration from a on old mac server to a Windows Server 2008 R2 machine running a 12TB(10 usable) RAID5 server. It's using an SMB share and now the OSX 10.5/.6 users can search sometimes it works but takes up to 10 minutes. The OSX 10.7 machine seems to be fine. I've looked in the root of the shared drive for a .Spotlight-V100 file (ls -a) but it doesn't seem to be there. mdutil says indexing is on for that volume and I have cleared the index using mdutil -E /Volumes/MeSharedVolume numerous times. Any ideas?

    Read the article

  • Merging Flash animations

    - by Radu
    If I have a Flash project in which there are multiple movie clips animating, each with its own timeline and other embedded movie clips, again, each with its own timeline, how can I merge everything so that I end up with a single timeline and a single layer? If Flash doesn't support this, maybe there's something else out there that can do this? I'm thinking that such a tool would need to calculate the intermediary tween values and somehow create keyframes with those values, then break everything apart and only animate the correct parts from the calculated keyframe values...

    Read the article

< Previous Page | 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138  | Next Page >