Search Results

Search found 46646 results on 1866 pages for 'operating system'.

Page 1156/1866 | < Previous Page | 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163  | Next Page >

• Sonicwall VPN, Domain Controller Issues

  - by durilai

  I am trying to get the domain logon script to execute when I connect to VPN. I have a SonicWall 4060PRO, with the SonicOS Enhanced 4.2.0.0-10e. The VPN connects successfully, but the script does not execute. I am posting the log below, but I see two issues. The first is the inability to connect to domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. The second is the failure of the script. 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found.. I assume the second issue is caused because of the first, also on the second issue it seems to be trying to get the logon script from my local PC, not the server. Finally, the DC can be pinged and reached by its computer name once the VPN is connected. The shares that the script is tring to map can be mapped manually. Any help is appreciated. 2009/12/18 19:49:31:063 Information The connection "GroupVPN_0006B1030980" has been enabled. 2009/12/18 19:49:32:223 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:32:289 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX XAuth has requested a username but one has not yet been specified. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX Sending phase 1 delete. 2009/12/18 19:49:32:336 Information XXX.XXX.XXX.XXX User authentication information is needed to complete the connection. 2009/12/18 19:49:32:393 Information An incoming ISAKMP packet from XXX.XXX.XXX.XXX was ignored. 2009/12/18 19:49:36:962 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 1 negotiation. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Starting aggressive mode phase 1 exchange. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX NAT Detected: Local host is behind a NAT device. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX The SA lifetime for phase 1 is 28800 seconds. 2009/12/18 19:49:37:036 Information XXX.XXX.XXX.XXX Phase 1 has completed. 2009/12/18 19:49:37:094 Information XXX.XXX.XXX.XXX Received XAuth request. 2009/12/18 19:49:37:100 Information XXX.XXX.XXX.XXX Sending XAuth reply. 2009/12/18 19:49:37:110 Information XXX.XXX.XXX.XXX Received initial contact notify. 2009/12/18 19:49:37:153 Information XXX.XXX.XXX.XXX Received XAuth status. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX Sending XAuth acknowledgement. 2009/12/18 19:49:37:154 Information XXX.XXX.XXX.XXX User authentication has succeeded. 2009/12/18 19:49:37:247 Information XXX.XXX.XXX.XXX Received request for policy version. 2009/12/18 19:49:37:253 Information XXX.XXX.XXX.XXX Sending policy version reply. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Received policy change is not required. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX Sending policy acknowledgement. 2009/12/18 19:49:37:303 Information XXX.XXX.XXX.XXX The configuration for the connection is up to date. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting ISAKMP phase 2 negotiation with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP. 2009/12/18 19:49:37:377 Information XXX.XXX.XXX.XXX Starting quick mode phase 2 exchange. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX The SA lifetime for phase 2 is 28800 seconds. 2009/12/18 19:49:37:472 Information XXX.XXX.XXX.XXX Phase 2 with 10.10.10.0/255.255.255.0:BOOTPC:BOOTPS:UDP has completed. 2009/12/18 19:49:37:896 Information Renewing IP address for the virtual interface (00-60-73-4C-3F-45). 2009/12/18 19:49:40:189 Information The virtual interface has been added to the system with IP address 10.10.10.112. 2009/12/18 19:49:40:319 Information The system ARP cache has been flushed. 2009/12/18 19:49:40:576 Information XXX.XXX.XXX.XXX NetWkstaUserGetInfo returned: user: Dustin, logon domain: DT-WIN7, logon server: DT-WIN7 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX NetGetDCName failed: Could not find domain controller for this domain. 2009/12/18 19:49:53:457 Information XXX.XXX.XXX.XXX calling NetUserGetInfo: Server: , User: Dustin, level: 3 2009/12/18 19:49:53:460 Information XXX.XXX.XXX.XXX NetUserGetInfo returned: home dir: , remote dir: , logon script: 2009/12/18 19:49:53:466 Warning XXX.XXX.XXX.XXX Failed to execute script file \DT-WIN7netlogondomain.bat, Last Error: The network name cannot be found..

  Read the article

• WSRM error on Server running SQL databases

  - by Adam

  I have a Server Running Windows Server 2008 Enterprise Edition With SQL 2005. There is no problems with the server in its day to day functions but i am getting a Warning in the Event Log every 5 minutes with the following: Windows System Resource Manager encountered the following error 0x80010117. User Name will not be logged in the subsequent event logs. Error 0x80010117 User Action Address the error condition, and then try again. This has been happening for over 2 weeks now and i cannot find anything online to help! If i could have some help, then it would much appreciated. Thanks

  Read the article

• The Application was unable to start correctly (0xc0000142)

  - by Guy Thomas

  System = Windows 7 64-bit Various programs, notably Regedit, won't start. Instead I get: The Application was unable to start correctly (0xc0000142). Strangly, at least to my thinking, I can launch them via Task Manager. I am also grappling with AVG errors or over-activity, e.g. reports of Broken digital Signature. I am also having problems with Excel Update KB978474 I mention these just incase anyone thinks there is a connection, rather than expecting people to solve 3 problems at once.

  Read the article

• Static IP on FEDORA12 from Virtualbox

  - by Diego Castro

  I'm trying to get my FEDORA12 to have an STATIC IP - inside virtualbox - inside Ubuntu Let me rephrase that. I have an Ubuntu 9.04 system with vitualbox and a FEDORA12 vm there and I would like to put the fedora with an STATIC IP (amahi needs it), but I'm getting stuck... I'm using NAT (if that's any help) I tryid a few tutorials, but no go. I'm kind of new to the *nix world but I'm old school on M$ Edit: Screenshots UBUNTU 9.04 (host that has the vm) hxxp://pic.imagefap.com/images/full/43/154/1548751086.jpg FEDORA hxxp://pic.imagefap.com/images/full/43/205/2050216515.jpg hxxp://pic.imagefap.com/images/full/43/118/1182276176.jpg (sory cant post pics... not enough rep)

  Read the article

• Cannot start serial over lan on iDrac6

  - by Bryan Agee

  I have a couple of Dell R610/R710 servers loaded with iDrac6 system management boards. I figured out how to log into the SM CLP with ssh. According to the dell documentation, I should be able to start a console session by running: start /system1/sol1 but I get the following failure message: cmdstat status : 3 status_tag : COMMAND EXECUTION FAILED job job_id : 12 joberr errtype : 1 errtype_desc : Other cimstat : 6 cimstat_desc : CIM_ERR_NOT_FOUND severity : 2 severity_desc : Low /system1/sol1 started FAILED at Sun Sep 16 00:20:58 2012 I have enabled the serial-over-lan via the web interface and rebooted, but nothing seems to make them available.

  Read the article

• Should I enable "Intel NIC DMA Channels"?

  - by javapowered

  I have HP DL360p Gen8 646902-xx1 I'm trying to optimize my config for low latency trading. Should I enable "Intel NIC DMA Channels"? Will that help/affect my system? From HP doc: Added a new ROM Based Setup Utility (RBSU) Advanced Performance Option menu that allows the user to enable Intel NIC DMA Channels (IOAT). This option is disabled by default. When enabled, certain networking devices may see an improvement in performance by utilizing Intel's DMA engine to offload network activity. Please consult documentation from the network adapter to determine if this feature is supported.

  Read the article

• "No active network adapters found" Hyper-V 2008 R2

  - by mnemosyn

  I fiddled around with the virtual network settings of my Hyper-V server, because Windows Update failed to run in the VMs. I set the flag that makes the NIC exclusively usable by the VM. Now, the host system tells me it has no active network adapters. What does that even mean? According to netsh, there are three enabled network connections. I tried to restart the NICs using devcon.exe (the correct x64 version), but that doesn't make any difference - still, devcon reports the NICs are there and they are activated?! Is there any way I can force the host to re-enable the NICs?

  Read the article

• problem of setting audit rules: Syscall name unknown: stime

  - by zhaojing

  I am setting audit rules in /etc/audit/audit.rules. As the requirement : The audit system should be configured to audit all administrative, privileged, and security actions. So I add one line into /etc/audit/auditd.rules: -a exit,always -S stime -S acct -S reboot -S swapon However, after I restart audit.d by service auditd restart: There is error comeout: Stopping auditd: [ OK ] Starting auditd: [ OK ] Syscall name unknown: stime There was an error in line 14 of /etc/audit/audit.rules It seems stime can't be recognized. Could anybody help me to find out what is wrong with my added rule? Thanks a lot!

  Read the article

• Backup Exec job completed with exceptions: RWS_AttachToDLE

  - by HannesFostie

  2 of this weekend's jobs completed with exceptions, and mention "RWS_AttachToDLE". I get the feeling the job did in fact complete without missing data, but I would like to be 100% sure (and can't verify the backup myself right now - colleague is out of the office and the backup in question is a bit of a black box for me, it works but I am not familiar with its inner workings). Also, how can I prevent this from happening? Google didn't prove to be very helpful, and experts exchange seem to have changed their system so that you can't simply scroll down to see the answers to a particular question ;-)

  Read the article

• Installing SSL Certificate for use in IIS7, installation "works", but cert listing disappears

  - by Matt

  Windows Server 2008 R2, IIS7. We have an SSL cert from Go Daddy. It's a wildcard cert, so it will work across subdomains (e.g. *.domain.com). I followed the instructions located at http://help.godaddy.com/topic/742/article/4801 for installing the certificate. I get to the IIS step, where I: Click on "Security Certificates" feature when the server is selected in the left pane Click on "Complete Certificate Request" Navigate to the .crt file on the file system Give it a "friendly" name, click finish The cert gets listed on the main pane now of this "Server Certificates" panel. But, if I refresh the page, or navigate away and come back, it's gone. And the cert is not listed as a viable binding when trying to bind a site to https. This seems like a pretty straight forward process, but clearly I'm missing something here. Any ideas?

  Read the article

• Can't boot up computer windows 8 installation

  - by danny ramirez

  I wanted to install Windows 8 with a volume partition and when the Windows 8 was installing it rebooted and it gave me an error: The digital signature for this file couldn't be verified. File :windows \system 32\winload.exe error code 0xc0000428. I have tried bootec commands and they didn't seem to fix it. Also my Windows 7 got deleted and I only have to boot with the Windows 8 error, so I can't do anything not even boot to safe mode. I have tried to install Windows 8 from disk later on and it won't let me because it keeps rebooting and starting the installation again, so I took off the disk before it rebooted and it takes me to that error again. Remember that's my only boot option so I'm stuck in the installation disk.

  Read the article

• Remote Desktop fails without error message

  - by Adrian Grigore

  Hi, After rebooting my server Windows 2008 R2 server, I can't log into the remote desktop anymore. When I try to connect, the remote desktop zooms through different status messages, the last of them being "Configuring remote session" and then reverts to the initial Connection dialog again without giving me any error message. The server is seems to be up, since it's still deliverying web pages. Also, it does seem to be accepting my credentials. Is there any way to see why the connection fails? I've browsed through my system's even logs, but could not find anything related to remote desktop. Perhaps there's some hidden troubleshooting mode? Thanks, Adrian Edit: In the meantime the server has come back online. I'm not sure if it did so on it's own or if tech support did because I have not heard from them so far, but the problem is solved for the moment. It's a bit disappointing not to know the cause of thep problem though.

  Read the article

• DB2 upgrade database Fails due to descriptor corruption

  - by Jdcc

  Hi Everyone, I've recently upgraded my DB2 9.5 to DB2 9.7, and I am unable to update my database to v9.7. The error I have been receiving is this: "SQL0901N The SQL statement failed because of a non-severe system error. Subsequent SQL statements can be processed. (Reason "Packed descriptor corruption found. Please run RUNSTATS on this table".) SQLSTATE=58004" I have tried to connect with 9.5 clients that worked before the "upgrade" on other machines, but they complain about the DB not being migrated to the current version. So my DB is now somewhere in limbo between 9.5 and 9.7. Would anyone have any clever ideas on how to execute runstats on this DB without being able to connect to it? I'm not concerned so much about the data inside, as I am about the settings (name,optimization stuff, etc) Please let me know if I there is any information I left out. Thanks, Jdcc

  Read the article

• hp ProLiant DL380 G6 server error code: 347 of array controller

  - by alhaythum

  I have got a bran new hp ProLiant DL380 G6 server with embedded smart array P410i controller, I got 164 GB SATA drives and wanted to change them with 300 GB SATA drives before installation. Now, we replace the drives and begin the configuration with the hp DVD and begin; when we reach the point that we want to save the configurations, an error message appears: "The operation has failed with an unknown error, please restart the application and attempt the operation again" When using Rescan System, this error message appears: "Status Alerts - Smart Array P410i in Embedded Slot Warning Status Message Code Description 347 The cache for Smart Array P410i Embedded Slot is not configured" We return back to the 164 GB SATA drives and the message just keeps appearing again. Any help please.

  Read the article

• mount: cannot remount block device /dev/sda5 read-write, is write-protected

  - by marc.riera

  So, this is it. Everything is working as usual except the disk is read only and dont want to change back. ^_^! thanks. root@NODE02:/tmp# df . Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda5 461490504 179502128 258545928 41% / root@NODE02:/tmp# mount -o rw,remount /dev/sda5 mount: cannot remount block device /dev/sda5 read-write, is write-protected root@NODE02:/tmp# touch helll touch: cannot touch `helll': Read-only file system It's not multipath. It's nothing special. Just a server with ubuntu 9.10. makes no sense for me, does it?

  Read the article

• Redhat Software RAID 1 not syncing

  - by hamstar

  Hey guys, I setup a software RAID 1 on a Redhat server, everything went sweet and it synced the first time. The other day the raid failedover for some reason and the disks hadn't been syncing since that first time, so it went back to 2 weeks ago when we did the first sync. We got the system back up running off the master only. However what would cause the software raid to not sync? I used mdadm to setup the RAID. Any ideas? EDIT: Sorry I don't have the output from /proc/mdstat before the raid failedover, it is now running on only the master... I can put the slave back in no problems but I was wondering how to make it sync all the time instead of only when I add it.

  Read the article

• Dual NIC Networking CentOS 5.3 (losing connection)

  - by Toymakerii

  I have a CentOS System with two NICs on it. One is Ethernet the other is Wireless. The Ethernet has an address of 192.168.1.110 and is tied to a LAN. (The LAN provides DHCP and DNS for its domain of 192.168.1.*) The Wireless card should have an address of 131.238.. and is tied to the WAN. For some evil reason, I can get the WAN to work for a short amount of time then it suddenly dies. I have to turn on/off the connection to get it to work again. Any suggestions?

  Read the article

• Plesk 11: install Apache with SNI support

  - by Ueli

  If I try to update from standard Apache to Apache with SNI support with the Plesk installation program (example.com:8447), I get an error, that I have to remove apr-util-ldap-1.4.1-1.el5.x86_64 It's in german: Informationen über installierte Pakete abrufen... Installation started in background Datei wird heruntergeladen PSA_11.0.9/dist-rpm-CentOS-5-x86_64/build-11.0.9-cos5-x86_64.hdr.gz: 11%..20%..30%..40%..50%..60%..70%..81%..91%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/update-rpm-CentOS-5-x86_64/update-11.0.9-cos5-x86_64.hdr.gz: 10%..20%..30%..40%..50%..60%..70%..80%..90%..100% fertig. Datei wird heruntergeladen PSA_11.0.9/thirdparty-rpm-CentOS-5-x86_64/thirdparty-11.0.9-cos5-x86_64.hdr.gz: 10%..26%..43%..77%..100% fertig. Datei wird heruntergeladen BILLING_11.0.9/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/update-rpm-RedHat-all-all/update-11.0.9-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/thirdparty-rpm-RedHat-all-all/thirdparty-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/dist-rpm-RedHat-all-all/build-11.0.10-rhall-all.hdr.gz: 10%..22%..31%..41%..51%..65%..70%..80%..90%..100% fertig. Datei wird heruntergeladen SITEBUILDER_11.0.10/update-rpm-RedHat-all-all/update-11.0.10-rhall-all.hdr.gz: 100% fertig. Datei wird heruntergeladen APACHE_2.2.22/thirdparty-rpm-CentOS-5-x86_64/thirdparty-2.2.22-rh5-x86_64.hdr.gz: 19%..25%..35%..83%..93%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/update-rpm-CentOS-5-x86_64/update-2.2.22-rh5-x86_64.hdr.gz: 100% fertig. Datei wird heruntergeladen BILLING_11.0.9/dist-rpm-RedHat-all-all/build-11.0.9-rhall-all.hdr.gz: 11%..23%..31%..41%..52%..62%..73%..83%..91%..100% fertig. Datei wird heruntergeladen APACHE_2.2.22/dist-rpm-CentOS-5-x86_64/build-2.2.22-rh5-x86_64.hdr.gz: 36%..50%..100% fertig. Pakete, die installiert werden müssen, werden ermittelt. -> Error: Mit der Installation kann erst fortgefahren werden, wenn das Paket apr-util-ldap-1.4.1-1.el5.x86_64 vom System entfernt wird. Es wurden nicht alle Pakete installiert. Bitte beheben Sie dieses Problem und versuchen Sie, die Pakete erneut zu installieren. Wenn Sie das Problem nicht selbst beheben können, wenden Sie sich bitte an den technischen Support. - «Error: The installation can be continued only if the package apr-util-ldap-1.4.1-1.el5.x86_64 is removed from the system» But I can't uninstall apr-util-ldap-1.4.1-1.el5.x86_64 without removing a lot of important packages: Dependencies Resolved ========================================================================================================================================= Package Arch Version Repository Size ========================================================================================================================================= Removing: apr-util-ldap x86_64 1.4.1-1.el5 installed 9.0 k Removing for dependencies: SSHTerm noarch 0.2.2-10.12012310 installed 4.9 M awstats noarch 7.0-11122114.swsoft installed 3.5 M httpd x86_64 2.2.23-3.el5 installed 3.4 M mailman x86_64 3:2.1.9-6.el5_6.1 installed 34 M mod-spdy-beta x86_64 0.9.3.3-386 installed 2.4 M mod_perl x86_64 2.0.4-6.el5 installed 6.8 M mod_python x86_64 3.2.8-3.1 installed 1.2 M mod_ssl x86_64 1:2.2.23-3.el5 installed 179 k perl-Apache-ASP x86_64 2.59-0.93298 installed 543 k php53 x86_64 5.3.3-13.el5_8 installed 3.4 M php53-sqlite2 x86_64 5.3.2-11041315 installed 366 k plesk-core x86_64 11.0.9-cos5.build110120608.16 installed 79 M plesk-l10n noarch 11.0.9-cos5.build110120827.16 installed 21 M pp-sitebuilder noarch 11.0.10-38572.12072100 installed 181 M psa x86_64 11.0.9-cos5.build110120608.16 installed 473 k psa-awstats-configurator noarch 11.0.9-cos5.build110120606.19 installed 0.0 psa-backup-manager x86_64 11.0.9-cos5.build110120608.16 installed 8.6 M psa-backup-manager-vz x86_64 11.0.0-cos5.build110120123.10 installed 1.6 k psa-fileserver x86_64 11.0.9-cos5.build110120608.16 installed 364 k psa-firewall x86_64 11.0.9-cos5.build110120608.16 installed 550 k psa-health-monitor noarch 11.0.9-cos5.build110120606.19 installed 2.3 k psa-horde noarch 3.3.13-cos5.build110120606.19 installed 20 M psa-hotfix1-9.3.0 x86_64 9.3.0-cos5.build93100518.16 installed 23 k psa-imp noarch 4.3.11-cos5.build110120606.19 installed 12 M psa-ingo noarch 1.2.6-cos5.build110120606.19 installed 5.1 M psa-kronolith noarch 2.3.6-cos5.build110120606.19 installed 6.3 M psa-libxml-proxy x86_64 2.7.8-0.301910 installed 1.2 M psa-mailman-configurator x86_64 11.0.9-cos5.build110120608.16 installed 5.5 k psa-migration-agents x86_64 11.0.9-cos5.build110120608.16 installed 169 k psa-migration-manager x86_64 11.0.9-cos5.build110120608.16 installed 1.1 M psa-mimp noarch 1.1.4-cos5.build110120418.19 installed 2.9 M psa-miva x86_64 1:5.06-cos5.build1013111101.14 installed 4.5 M psa-mnemo noarch 2.2.5-cos5.build110120606.19 installed 4.1 M psa-mod-fcgid-configurator x86_64 2.0.0-cos5.build1013111101.14 installed 0.0 psa-mod_aclr2 x86_64 12021319-9e86c2f installed 8.1 k psa-mod_fcgid x86_64 2.3.6-12050315 installed 222 k psa-mod_rpaf x86_64 0.6-12021310 installed 7.7 k psa-passwd noarch 3.1.3-cos5.build1013111101.14 installed 3.7 M psa-php53-configurator x86_64 1.6.2-cos5.build110120608.16 installed 6.4 k psa-rubyrails-configurator x86_64 1.1.6-cos5.build1013111101.14 installed 0.0 psa-spamassassin x86_64 11.0.9-cos5.build110120608.16 installed 167 k psa-turba noarch 2.3.6-cos5.build110120606.19 installed 6.1 M psa-updates noarch 11.0.9-cos5.build110120704.10 installed 0.0 psa-vhost noarch 11.0.9-cos5.build110120606.19 installed 160 k psa-vpn x86_64 11.0.9-cos5.build110120608.16 installed 1.9 M psa-watchdog x86_64 11.0.9-cos5.build110120608.16 installed 2.9 M webalizer x86_64 2.01_10-30.1 installed 259 k Transaction Summary ========================================================================================================================================= Remove 48 Package(s) Reinstall 0 Package(s) Downgrade 0 Package(s) What should I do?

  Read the article

• Where to export a truly global environment variable?

  - by Socio

  I want to set an environment variable that will be visible to all processes launched by Upstart. This is on a CentOS system, but I presume the same applies to Ubuntu given that they both use Upstart. Somewhere in /etc/init/ perhaps? Note that adding it in /etc/profile.d only applies to login shells. I want all processes (e.g cron, rc.local, etc) to see it. Obviously I'd prefer not to edit existing sys config files if it can be avoided.

  Read the article

• Cannot disable spotlight indexing on volume

  - by jayhendren

  I have a FAT32 partition on my HDD. When using OSX, it is mounted to /Volumes/MEDIA. After a recent upgrade to Mavericks, spotlight is having trouble indexing it, eating up almost all of my system resources, and I cannot get the indexing to stop: [jay-mba-osx ~]% sudo mdutil -v -a -i off /: Indexing disabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -E /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% How to I tell spotlight to "cease and desist" on my MEDIA volume? I only want or need spotlight indexing on my OSX partition.

  Read the article

• 4GB of RAM in MacOSX 10.5, only 3GB in MacOSX 10.6

  - by Albert

  Hi, I was using MacOSX 10.5 on my MacBook until today and I had 4GB of memory there. Now I have updated to MacOSX 10.6 and it only displays 3GB. Why is that? How can I fix it? Also, I am a bit wondering why most people (well, most of the Google hits explained the 3GB issue that way -- leaving out the fact that it has worked earlier) are saying that a 32bit system can under no circumstances access more than 3.2GB. Don't we have PAE nowadays in most systems? Thanks, Albert

  Read the article

• Fonts still missing in Flash after cleaning caches

  - by Anriëtte Combrink

  Hi there I was having missing fonts in Flash CS4, so I cleaned the font caches using the following commands in Terminal: sudo atsutil databases -remove atsutil server -shutdown atsutil server -ping These commands ran fine, so I restarted and opened my Flash file. Now suddenly Verdana is missing in Flash which was previously there. I ran FontNuke, and cleaned caches, and rebooted. Still nothing showed in Flash. I ran Cocktail, and cleaned just the font caches (all users on system), still nothing in Flash. I reinstalled Flash (didn't work) I then uninstalled Flash, rebooted and installed Flash, rebooted. (didn't work) After all this, Verdana still doesn't load in Flash. I validated all fonts in Font Book and removed the erroneous fonts. Is there any other way I can have all the fonts load in Flash (eliminate another cache I am not seeing)? I am so sick of Flash and its font caches and Verdana is pretty much a standard font so what am I doing wrong here?

  Read the article

• Uninstalling Vista from dual boot of Win7/Vista

  - by Alex

  Topic title says it all. Right now I have 2 things I need to do... 1) Remove the windows.old folder. My problem with this is that when I go to disk cleanup, the "Remove Previous Window Installations" option isn't there. Not sure what to do here. EDIT: Solved this part. Didn't hit button clean up system files, was just looking at normal disk cleanup window. 2) The rest.. I've read that I should use EasyBCD, but I'm not sure what to do with it once I get it. Any help is appreciated. Thanks. EDIT: I downloaded EasyBCD, and I see the option to add/delete entries. Do I just need to delete the Vista entry, or is there more to it than that?

  Read the article

• Access Denied using TakeOwn.exe

  - by Magnus

  I have got this file that I can't delete. It happened after a system crash, so the CHKDSK kicked in upon next reboot. After that, I can't delete the file. THis is on Windows Home Server, and the file is one of those hidden Thumbs.db, and my WHS reports a "File conflict" on the file, the reason: Access Denied" What I have tried so far, running as an Administrator: Delete: Access Denied TakeOwn.exe : Access Denied Attrib.exe -s -h : Access Denied Icacls.exe : Access Denied Re-boot in to safe mode and tried the above: Access Denied I have used the CHKDSK /f again, rebooted since some suggestions is that the file has been corrupted, but that didn't change anything. Any suggestions ?

  Read the article

• Configuring Cisco 877W router from scratch for DHCP, WiFi, ADSL2+, NAT

  - by David M Williams

  Hi all, I apologise if this is a BIG question but I am quite lost with the Cisco IOS. I know what I want to achieve just not how to do it :( I have a Cisco 877W router with 4 FastEthernet interfaces, 1 ATM interface and 1 802.11 Radio. I want to set it up for a small network and am trying to construct a configuration below. I was using Google to try and flesh it out but I think I need help and guidance from actual experts! If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software Here's what I have so far, which hopefully outlines clearly enough what I am wanting to do. The bits in angle brackets are placeholders (eg the secret password). ! ! Set router hostname ! hostname Shazam ! ! Set usernames and passwords ! username david privilege 15 secret 0 <PASSWORD> enable secret <SECRETPASSWORD> ! ! Configure SSH and telnet access ! line vty 0 4 privilege level 15 login local transport input telnet ssh ! ! Local logging ! logging buffered 51200 warning ! ! Set date and time for NSW, Australia (GMT +10h) ! ! ! Set router IP address to 192.168.1.1 on FastEthernet0 port ! interface FastEthernet0 ip address 192.168.1.1 255.255.255.0 no shut ip nat inside ! ! Forward any unknown DNS requests to Google ! ip dns server ip name-server 8.8.8.8 ip name-server 8.8.4.4 ! ! Set up DHCP ! DHCP pool covers 192.168.1.100 - .199 ! Set gateway and DNS server to be the router, ie 192.168.1.1 ! service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool <DHCPPOOLNAME> network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ! ! DHCP reservations ! ! Assign IP address 192.168.1.105 to MAC address 00-21-5D-2F-58-04 ! ! Configure ADSL2 connection details ! interface atm dsl operating-mode adsl2+ ! ! Set up NAT rules ! ! Forward port 35394 to 192.168.1.105 ! ! Set up WiFi ! ! SSID visible, WPA2 security, Pre-shared key I'm hoping most of this is boiler-plate stuff to you guys. I'm keen to not just get a working script but to actually understand it also. Unfortunately, I'm finding the Cisco reference material online very complex. Thank you!

  Read the article

< Previous Page | 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163  | Next Page >