Search Results

Search found 5123 results on 205 pages for 'gateway timeout'.

Page 116/205 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• GNS3 Cannot ping/resolve DNS record

  - by Eldad Cohen

  I set up an internet lab with GNS3, which has 3 routers, in each node there is a computer directly connected. One of the hosts is a DNS server, Windows 2003 Server. The other one is a Windows XP machine. Ping is good between routers and machines but no ability to ping domain.com record on DNS server 2003. I set a static nat on the router to route all traffic from gateway to the DNS server internal ip address, still no answer for the dns request. Any ideas or thoughts will be most welcome.

  Read the article

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• SQL Server 2008 R2 100% availability

  - by Mark Henderson

  Is there any way to provide 100% uptime on SQL Server 2008 R2? From my experience, the downtimes for the different replication methods are: Log Shipping: Lots (for DR only) Mirroring w. NLB: ~ 45 seconds Clustering: ~ 5-15 seconds And all of these solutions involve all of the connections being dropped from the source, so if the downtime is too long or the app's gateway doesn't support reconnection in the middle of task, then you're out of luck. The only way I can think to get around this is to abstract the clustering a level (by virtualising and then enabling VMWare FT. Yuck. Good luck getting this to work on a quad-socket, 32-core system anyway.). Is there any other way of providing 100% uptime of SQL Server?

  Read the article

• How can artificially create a slow query in mysql?

  - by Gray Race

  I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

  Read the article

• How to configure remote access to multiple subnets behind a SonicWALL NSA 2400

  - by Kyle Noland

  I have a client that uses a SonicWALL NSA 2400 as their firewall. I need to setup a second LAN subnet for a handful of PC. Management has decided that there should be a second subnet even though intend to allow access across the two subnets - I know... I'm having trouble getting communication across the 2 subnets. I can ping each gateway, but I cannot ping or seem to route traffic fron subnet A to subnet B. Here is my current setup: X0 Interface: LAN zone with IP addres 192.168.1.1 X1 Interface: WAN zone with WAN IP address X2 Interface: LAN zone with IP address 192.168.75.1 I have configured ARP and routes for the secondar subnet (X2) according to this SonicWALL KB article: http://www.sonicwall.com/downloads/supporting_multiple_firewalled_subnets_on_sonicos_enhanced.pdf using "Example 1". At this point I don't minding if I have to throw the SonicWALL GVC software VPN client into the mix to make it work. It feel like I have an Access Rule issue, but for testing I made LAN LAN, WAN LAN and VPN LAN rules wide open with the same results.

  Read the article

• How can I access the external microphone with Ubuntu?

  - by Charles Merriam

  Sound in Ubuntu, it has its own special joy. I would like my external microphone to work. Symptoms: I can play sound through the speakers I can play sound through the headsets. Plugging and and plugging headphone output correctly switches. I can record from the built-in microphone, using "Sound Recorder" and others. but: I cannot record from the external microphone. My Sound Preferences/Input panel has no option for an external microphone. If the answer is upgrade the ALSA drivers, please say exactly what to type. Thank you. ======== I'm using Ubuntu 9.10 Karmic Koala on a laptop (Gateway W3501), Sigmatel. That is: ~$ head -1 /proc/asound/card0/code* ==> /proc/asound/card0/codec#0 <== Codec: SigmaTel STAC9205 ==> /proc/asound/card0/codec#1 <== Codec: Conexant ID 2c06 ~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)

  Read the article

• How can I log all traffic with its exact length?

  - by Legate

  I want to process all packets with their size going through our gateway server (running Debian 4.0). My idea is to use tcpdump, but I have two questions. The command I'm currently thinking of is tcpdump -i iface -n -t -q. Is it guaranteed that tcpdump will process all packets? What happens if the CPU is working to full capacity? The format of the output lines is IP ddd.ddd.ddd.ddd.port > ddd.ddd.ddd.ddd.port: tcp 1260. What exactly is 1260? I have the suspicion that it is the payload in bytes of the packet, which would be exactly what I need, but I'm not sure. It might be the TCP Window Size. Or perhaps there is an even better way of doing this? I thought about a LOG rule in iptables, but tcpdump seems easier and I don't know whether iptables can log the packet lengths.

  Read the article

• Packet loss with all adapters on one PC only on the LAN

  - by Enigmativity

  I have a Windows 7 64-bit machine that is losing up to 20% of IP packets on both adapters - wireless & LAN. Browser traffic appears to be affected the most, but it is happening to all protocols. All other computers on the network are functioning fine. If I ping from my faulty machine to any machine on the LAN (wired or wirelessly), including the router/gateway and internet sites, I get up to 20% packet loss. If I do the following commands: ipconfig /release ipconfig /renew then I sometimes get my network performance back for a matter of a few seconds to less than a couple of minutes. Rebooting also works for a short period of time. This problem has been occurring for a couple of months and is getting worse. The computer used to work just fine. I updated the wireless adapter firmware the other day with no effect. Does anyone know what is happening?

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Disabling at application level a nic (network interface) on Windows

  - by Leandro

  How can I disable at application level a network interface? The main question is this: If I disable the nic trough wmic (win7) or devcon (XP), the "plug and play" of a wired nic doesn't work any more. For example, if the user put the cable on a disabled nic, the OS doesn't know about it. So I need to persist the enable condition but disabling the networking like a disable nic. There's some API, network configuration (routing, changing ip, changing gateway, any), .NET Framework resource (Only NetFramework 2.0) or do you can think in any workaround to do this? Suggest and ideas also will be treated as a solution. Thanks and kind regards.

  Read the article

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• Mac internet problems

  - by Bradley Herman

  Our office is set up with mostly macs (7 of them) but we do have a windows laptop and a windows desktop on the network as well. The network is configured with a modem going into a switch/router throughout the office to the computers, along with a wireless router. Everything runs fine most of the time, but periodically while using the web, certain sites will stop loading and timeout repeatedly. This usually lasts 20 minutes or so and can be incredibly annoying. Resetting the modem/router and/or rebooting the computer never helps. The weirdest part is that in almost every case, the websites are fine on our Windows machines. I frequently use github, google, Stack Overflow, and jQuery reference and I can count on the sites being unavailable to me at least once a day. While I can't get them to load, I can spin my chair around to the windows server behind me and load the sites just fine. Any idea what the hell could be going on here?

  Read the article

• Nagios Check_hpjd giving me problems!

  - by Mister IT Guru

  When I run the following [root@host plugins]# ./check_hpjd -H printer1.mydomain.com : Timeout from host printer1.mydomain.com I have Net-snmp installed on my system, I noted that i didn't have net-snmp-utils installed, and then I was able to run [root@host plugins]# snmpwalk -Os -c public -v 1 printer1.mydomain.com system sysDescr.0 = STRING: HP ETHERNET MULTI-ENVIRONMENT sysObjectID.0 = OID: enterprises.11.2.3.9.1 sysUpTimeInstance = Timeticks: (325408663) 37 days, 15:54:46.63 sysContact.0 = STRING: sysName.0 = STRING: printer1 sysLocation.0 = STRING: sysServices.0 = INTEGER: 72 So I know that the printer is working as expected, (as far as SNMP is concerned). But when I run [root@host plugins]# ./check_hpjd -H printer1.mydomain.com -C public Error in packet () I get this error - From what I've tried so far, I know my host can communicate via SNMP, I know the printer responds via SNMP, so I guess I'm left to look at the plug-in, which I will be checking up on. I'm new to SNMP, I am investigating this with my good friend Google search, but I am on a learning curve here, so please forgive my questions if they sound stupid,

  Read the article

• CentOS: eth0 not starting on boot

  - by Cameron Aziz

  Whenever I reboot a CentOS Hyper-V VM, eth0 does not start automatically. All I need to do is perform ifup eth0 and all is fixed, but that isn't feasible from ssh! I am starting in runlevel 3. After I perform ifup eth0 on the console: [root@localhost ~]# ifconfig eth0 Link encap:Ethernet HWaddr 00:15:5D:2B:2B:07 inet addr:10.10.0.3 Bcast:10.10.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe2b:2b07/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4656 (4.5 KiB) TX bytes:6399 (6.2 KiB) Interrupt:9 Base address:0xa000 [root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none IPADDR=10.10.0.3 NETMASK=255.255.255.0 GATEWAY=10.10.0.1 USERCTL=no ONBOOT=yes [root@localhost ~]# chkconfig --list | grep network network 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Cascading switches: uplink to uplink?

  - by wuckachucka

  I'm a bit confused as to why I haven't seen any references online to using Switch A's uplink port (1Gbps, 24-port 10/100) to connect to Switch B's uplink port: everything I've seen -- including documentation, forums, articles, etc. -- has Switch A's uplink port going to one of Switch B's 10/100 access ports. As I understand it, the Uplink port (besides greater speed normally) is no different than another port except that it's "internally crossed-over" so that you can use a straight cable with it. I've also seen documentation on using the uplink port to connect a switch to a gateway router, or even a server, as it provides greater bandwidth than the access ports, but yet not sure why nobody seems to be cross-uplinking, even when there's 2 uplink ports available on some higher-end switches. Switch in question is Linksys SRW224P (x2). Am I missing something?

  Read the article

• Weird behaviour with OpenVPN: can not connect to a few websites

  - by Gaby Solis

  My OpenVPN server is Ubuntu 10.04.4 LTS and openvpn version is 2.x My client is on Win 7. He can access most sites but not Youtube, Facebook, Twitter, groups.google.com, etc My server.conf is: local x.x.x.x port 1194 proto udp dev tun ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key dh /etc/openvpn/keys/dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status /etc/openvpn/keys/openvpn-status.log verb 4 I can access Youtube etc using SSH Tunnel + SOCKS Proxy, and the Ubuntu server can access all sites. so nothing is wrong with the Ubuntu server. With little information I can provide, I am not looking for a quck solution. How can I debug?

  Read the article

• SQL Server 7 Transaction Logs Issues

  - by nate

  Over the week my database server transaction log was full. With our app people could select from the database but could not update or insert into the database. In the past we have just truncated the transaction logs. After that, everything was back to normal. This week I truncated the transaction logs, and shrink that database. Now we can select, update, and insert into the database. The only issue is when we do a big job, and to a lot on inserting or updating, we get the following error: Database error: S1008:[Microsft][ODBC]Operation canceled We never had this issue before, I am assuming the that is the same as a timeout error. Has anyone else had this issue before, or know how I resolve this?

  Read the article

• strange behaviour - dhclient needs to be run twice in order to connect to wireless

  - by splicer

  I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

  Read the article

• Scaling up an apache server

  - by pehrs

  I have an Ubuntu server running apache2 which i expect to be hit by around 500-1000 (concurent) users for a limited amount of time. The server serves a mixture of custom (rather light) php pages connected to a postgresql db (around 20 Mb in size) and static content. The hardware is stable and pretty beefy: Intel Xeon E5420 @ 2.5 GHz 12 GB RAM During previous rushes on this server I have increased ServerLimit, the MaxClients for the MPM modules and decreased Timeout and KeepAliveTimeout. It has worked, but been sluggish and I have a feeling more can be done. How would you suggest configuring the Apache server to handle this kind of load?

  Read the article

• Connection timed out exception, why?

  - by Dheeraj Kumar Aggarwal

  I am developing an application which uses embedded tomcat server 7, and deploys a web application on embedded server. My application accesses the embedded webapp through Rest APIs, but my clients are getting Connection Timed Out exceptions and port is also not blocked. I never gets this exception when I install this application on my local machine. Some points: IP address is used in the host name part (They are able to access this IP address on other port) Port is not blocked We are using Apache HttpClient library to access the URL Timeout interval seems not to be an issue. What are the possible reasons for this exception Connection Timed Out? or How can I simulate this problem on my local machine? Any pointers would be helpful.

  Read the article

• How to send connection type (SSH|Telnet) info in Radius Access Requests on Cisco router?

  - by Gianni Costanzi

  I've configured the following on a cisco router: aaa authentication login default group radius local ! radius-server host x.x.x.x auth-port 1012 acct-port 1013 radius-server host y.y.y.y auth-port 1012 acct-port 1013 radius-server retransmit 1 radius-server timeout 3 radius-server key 7 xxxxxxxxx I'd like to be able to specify some radius options in order to add information about the type of connection for which a user is being authenticated, i.e. I'd like the radius server to receive in the Cisco Router's Radius Access Request information about the connection being SSH or Telnet.. I'd like to find something that automatically adds this info in the access request, without specific configurations on VTY lines dedicated to SSH and to Telnet. Any idea about that?

  Read the article

• CentOS openLDAP cert trust issues

  - by 84104

  # LDAPTLS_CACERTDIR=/etc/ssl/certs/ ldapwhoami -x -ZZ -H ldaps://ldap.domain.tld ldap_start_tls: Can't contact LDAP server (-1) additional info: TLS error -8172:Peer's certificate issuer has been marked as not trusted by the user. # openssl s_client -connect ldap.domain.tld:636 -CApath /etc/ssl/certs <... successful tls negotiation stuff ...> Compression: 1 (zlib compression) Start Time: 1349994779 Timeout : 300 (sec) Verify return code: 0 (ok) --- openssl seems to think the certificate is fine, but openldap's libraries (pam_ldap exhibits similar behavior, which is how I got on to this mess) disagree. What am I doing wrong?

  Read the article

• Management VLAN Cisco Catalyst

  - by cha789

  I have configured a couple of VLANs on a Cisco Catalyst switch, i will put all the ports that clients is connected to, into these VLANs. I want to configure the native VLAN [vlan 1] as management VLAN so i can use a telnet client to connect to the switch. How can i block all but one specific IP-address to telnet into the switch? As i understand vlan 1 has many task regarding different protocols and i do not want to break that but only allow one specific IP-address to connect to the switch with a telnet client [actually the gateway ip address of the switch].

  Read the article

• Not all of your nameservers are in different subnets. Single point of failure

  - by user2118559

  Using VPS hosting and dynadot (domain registrar) DNS. Checked domain name with http://www.intodns.com and get some warnings Different subnets WARNING: Not all of your nameservers are in different subnets and Different autonomous systems WARNING: Single point of failure As understand to avoid the warning must have second Ip4 address and both the addresses must point to different servers? If both Ip addresses point to the same server, it does not help? I mean each server has own Ip address. If one server down, then visitors can access website (files) on another server? Is this the reason why need more than one Ip? Tried to point website to 2 ip addresses and after some time get warning from uptimerobot Connection Timeout

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >