Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 116/346 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

  • Using Ubuntu to recover data from a crashed Windows install

    - by user289391
    I was using Windows on my laptop when suddenly the blue screen of death appeared and then laptop restarted and wrote for me this : Intel UNDI, PXE-2.1 (built 083) Copyright (C) 1997-200 Intel Corporation This Product is covered by one or more of the following patents: US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and US6,327,625 Realtek PCIe FE Family Controller Series v120 (01/26/10) PXE-M0F: ExitingPXEROM. reboot failed I have Ubuntu on an external disk so I have now booted to that. Two questions: Any theories on what happened? How can I use Ubuntu to recovers my data from Windows install?

    Read the article

  • pulseaudio: no microphone configuration

    - by mitsch
    Updated Ubuntu to precise from oneiric on a Dell Inspirion Mini 10 (with an Intel HDA-Soundcard). I can't remember having any issues with the microphone. I didn't need it - I tried ekiga the first time in precise. I couldn't hear any sound in the echo test of ekiga, so I switched to the "System Preferences" and looked for the microphone to boost it. Surprisingly, the microphone input was greyed out - I couldn't mute or unmute, i couldn't even move the volume-slider. On the other hand: I could change the microphone-setting on console with alsamixer, so don't worry about that… :) I just wanted to ask, how to get pulseaudio back to the known, comfortable behaviour. Some newbies won't know the trick to use alsamixer… My soundcard (output of lspci): 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Greets!

    Read the article

  • 12.04 Screen goes OFF and ON and hangs

    - by SKC
    i have installed ubuntu 12.04. while i'm using the screen goes off, comes back on (during which time, the system is not responsive) and this process repeats one more time in immediate succession after which the computer is responsive again. sometimes the system hangs indefinitely. sometimes the windows go blank. only the title bars are seen. i have tried re-installing the OS three times with no improvements. i have tried both 32 bit as well as 64 bit. i have no idea what the problem is and have tried hard to pin point that. i never had this prob till 11.10 my system config is as follow processor - 2nd gen intel core i7 (2660k) graphics - intel onboard HD graphics 3000 (no external graphics card) RAM - 4GB none of my friends seem to experience this problem. it really gets annoying as it happens really often. please advice

    Read the article

  • Ubuntu 12.10 install freezes at configuring hardware

    - by Max Keener
    I'm installing Ubuntu 12.10 (64 bit) from a bootable USB stick. At first I had trouble with a black screen after selecting 'install ubuntu'. I added nomodeset and xforcevesa to the options to fix that problem. Now when installing, it hangs at 'Configuring Hardware', specifically at ubuntu ubiquity: update-initramfs: Generating /boot/initrd.img-3.5.0-17-generic Specs: Asus UX32a DB51 Intel Core i5 3317U 1.7 GHz 4GB DDR3 RAM intel hd 4000 graphics 500 GB harddrive with 25 GB sandisk ssd I'm trying to install Ubuntu by itself right now on the SSD. I made custom partitions (100 mb EFI boot partition, 4GB swap space, 20GB ext4 mounted on '/') I've tried re-downloading the ubuntu iso and creating a new boot image on my flash drive and it results in the same problem. Thanks in advance for the help!

    Read the article

  • Honor titles for outstanding professionals from different companies? [closed]

    - by Alexander Galkin
    If this is an off-topic here, please move or advise a more appropriate forum. Microsoft MVP (most valuable professional) title is well known as an honor title for professionals not working for MS directly but who did a lot to popularize MS technologies. This title does not require any certification or any other proof of knowledge by the nominee and is awarded solely upon the one's contribution to community. As a member of Intel Developer Network I am also aware of Intel Black Belt award, that is in many aspects similar to Microsoft MVP. But this is all I know. Are there any other honor awards from top players in software industry?

    Read the article

  • High temperature on my laptop with Radeon Mobility HD4670

    - by Lorthirk
    As almost everyone here, I guess, in these days I downloaded Quantal Quetzal to give it a try. However I noticed that my laptop runs fairly hot with cooling fans almost always on, even sitting in the desktop doing nothing. I downloaded XSensor to read temperature sensors, and I saw that while CPU stays on about 65°C, so quiet normal I guess, the GPU sits at 75°C. In comparison my actual Windows 7 installation, which dual boots witb Quantal, stays at 59°C CPU and 65°C. So I went reading and learned that AMD dropped support for my video card from fglrx package, and that fglrx-legacy won't support 1.13 Xorg, so I'm basically stuck with OSS drivers. So I was guessing if there's anything I can try, and if it's possible that the OSS drivers could be the cause of the high temperature?

    Read the article

  • Grpahic hardwares

    - by Vanangamudi
    Which vendor provides better GPGPU. my requirements are confined to rendering utilising the GPU for BSDF building for e.g. Intel started providing Ivy Bridge chipset GPU, which are comparably fast to HD5960 cards. I'm not that against nvidia or amd. but I'm a fan of Intel. how it compares to nvidia in price and performance. if possible may I know, how all of them perform with OpenCL?? I'm not sure if it is right to ask it here. but I don't know where to ask.

    Read the article

  • Error mpicc command not found [closed]

    - by skn
    I want to compile hdf5 but I find the following error: /hdf5/hdf5-1.6.9CC=/usr/local/openmpi/bin/mpicc ./configure /home/sknandi/Research/ Simulation/hdf5/parallel_fdf5 CC=/usr/local/openmpi/bin/mpicc: Command not found. The result of echo $PATH is /hdf5/hdf5-1.6.9echo $PATH /priv/myriad3/ayw/research/COALA/visit/bin:/usr/local/bin:/usr/bin:/bin:/pkg/linux/intel/composerxe-2011.3.174/composerxe-2011.3.174/bin/intel64:/pkg/linux/casa/x86_64:/usr/local/bin:/bin:/usr/bin:/usr/local/openmpi/bin:/pkg/linux/intel/composerxe-2011.3.174/composerxe-2011.3.174/mpirt/bin/intel64:/pkg/linux/SS12/solstudio12.2/bin:/usr/local/vanilla-pds/bin and result of which mpicc is /hdf5/hdf5-1.6.9which mpicc /usr/local/openmpi/bin/mpicc

    Read the article

  • VMWare Player pauses often

    - by pascal
    I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

    Read the article

  • Graphics problems: noise-like glitch, and screen freezes in Ubuntu 13.04

    - by user207253
    I have recently upgraded to 13.04 and am using unity. I am experiencing two intermittent problems with the graphics: 1) All or part of the screen is taken up by 'noise', which lasts for about a second, see screenshot: 2) The launcher panel freezes. I can still move the mouse and the keyboard responds to function keys (I can dim the screen), but I cannot select anything. At the moment I recover by ctr-alt-f1, and restarting lightdm. My computer is a Samsung Chronos 7 laptop, model NP700Z5C, with Intel HD 4000 graphics The same problems occur with lightdm and gdm. I have attempted to install the intel drivers (as the screenshot hints) but these are not indicated as additional drivers in software & updates so I'm not sure whether they are in use. Any suggestions?

    Read the article

  • Make public webcam. Which protocol, which codec. (Using VLC)

    - by gsedej
    Hi! I want to use my old (1GHz) PC as webcam video stream server (like you can see those road cameras). I thought of using VLC and already tried using http output but it was not really good. Too cpu hungry, too big stream (kBps), not stable... I been reading VLC how-to's but thre is still a question. Which output should I use? Http, RTSP, UDP? I want to make for more than one computer at the same time (multicast). Which codec should be good? PC is not so fast so it shouldn't be too cpu hungry codec. Mpeg2, mpeg4, xvid? how much video buffer should I use (vb=?)? What about setting IP and ports? So I need some help with ideas, but if someone can make a VLC command line it's even better :) Oh, computer has direct internet connection and own IP.

    Read the article

  • display port on x230 not workgin

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • Distorted text in programs

    - by Teneff
    I've installed Ubuntu 11 with gnome and in some point the text in the programs becomes unreadable like this. It's not only the text, but even the desktop background looks awful. I've tried to add section in xorg.conf, but it didn't helped out. Section "Device" Identifier "g33/X3000" Driver "intel" BusID "PCI:0:2:0" Option "ModeDebug" "on" Option "MonitorLayout" "LCD,VGA" Option "DevicePresence" "true" EndSection And this is what the lshw returns about the VGA *-display description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:dfe00000-dfe7ffff ioport:8800(size=8) memory:e0000000-efffffff memory:dfe80000-d$

    Read the article

  • Unable to boot from USB boot drive for AMD Athlon 64

    - by Nagarjun
    I am trying to install Ubuntu 13.04 ISO for AMD64 Athlon processor using USB drive (8GB). I did create a bootable USB using the USB installer from Win7 intel 32bit processor (followed steps from here: http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows). This USB is unable to boot on my AMD64 bit processor. The bios is able to detect the USB and once I change the boot order to USB and save exit from bios, I get a message saying "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS CONTINUE" and unable to proceed further. However earlier to this I have successfully installed Ubuntu 13.04 on to my laptop which has Intel 32 bit core i5 processor with the same procedure but my desktop which has AMD64 is failing. I also tried to create the USB installer on my desktop which has the AMD64 bit processor and tried booting which also resulted in the same error. (My desktop currently has Win XP) Please help as I have run out of options. thanks, Nagarjun

    Read the article

  • Macbook 8.1 overheating

    - by timse201
    I have a macbook 8.1 with ubuntu 12.04 installed. But my cpu is getting very hot. On Mac my CPU is 50-60°C warm. But on ubuntu my mac is getting very hot and is by about 60°C but with min 3000rpm instead of 2000 on mac and the fan is getting very loud with 4500rpm on ubuntu when im browsing (without flash) or doing something else. i set it to 3000rpm because it is not getting so noisy instead of 2000rpm minimum. But thats not that what im expected. What ive done: i installed lm-sensors to see the temperatures and started the sensors-detect i installed macfancld, jupiter, the newest drivers from x-updates and installed the i965-va-driver oh and i installed mesa - with the default version my sandbridge was displayed as unknown i added GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force drm.vblankoffdelay=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1" ive added rfkill block bluetooth to /etc/rc.local to switch of bluetooth by default on boot my mac is not as noisy as before but it is noisy and sometimes very hot i hope you can help me

    Read the article

  • Why am I stuck at 640x480 on an Optimus hybrid-graphics system?

    - by exilada
    I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

    Read the article

  • Screen tearing (very noticable during video playback) with HD3000 AND HD Radeon 6630m

    - by NilRecurring
    I did not have this issue with Ubuntu 11.10. Well, to be clear, I did, but it was easily remedied with compiz workarounds. I have tried both the propriety and open source ati drivers, and the intel HD 3000 (as far as I know) should be part of the Kernel already. So I am pretty much 100% stumped given my general lack of Linux knowledge. I really enjoy this OS, would hate to have to return to Windows (read: HATE) because of something as trivial as video playback. Some details: Lenovo Thinkpad Edge e520 Intel HD 3000/AMD HD Radeon 6630m Ubuntu 12.04 64bit.

    Read the article

  • Lenovo g510 webcam not detected

    - by user280433
    I have lenvo g510. Cheese and guvcview don't detect my webcam. Its my lsubs: Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub How to fix it?

    Read the article

  • I cannot change the screen brightness

    - by user1793249
    here's my problem: Ever since I installed Ubuntu 12.10 on my computer I haven't been able to change the screen brightness, it was always set to the maximum. I did take a look at this post: Decrease Backlight Below Minimum And it helped me resolved the issue with the unbearable brightness, however one problem persists: I cannot change it through "Brightness & Lock" or the function buttons (F2 and F3), when I press the buttons, the animation shows up but nothing happens. I tried the following: http://www.refreshit.info/2012/08/solved-brightness-increase-and-decrease.html It did nothing... If it helps: I have an HP-dv6 6185la, it has an ATI Radeon 6770M HD card and an Intel HD Integrated Graphics Card It only detects the "Intel® Sandybridge Mobile" Thanks in advance.

    Read the article

  • How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

    - by cfogelberg
    This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

    Read the article

  • USB Port not working for Ubuntu 14.04 LTS

    - by user292125
    I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

    Read the article

  • Amnesia crashes

    - by Phil
    I am able to launch amnesia all the way through the menu. After I click start new game I am able to play a little bit. I hear the guy talk, then the game just closes. I installed the libtxc-dxtn-s2tc0 already as some of the similar problems I found online were fixed by doing so, but did not work for me. My graphics card is Intel GMA 4500MHD. Cpu: Intel Core Duo 2.1 Ghz. RAM: 3GB What else can I do to try and fix this? I'm pretty new to Ubuntu, I just installed it recently. What else (and how) should I post that may help you help me better?

    Read the article

  • No background/wallpaper in Ubuntu 12.04 - what to do?

    - by magnesus
    This is how my desktop looks like after moving Firefox window arround: The background just doesn't redraw, there is no wallpaper. It is like that since update to 12.04 - it was the same in 11.10 but I had special intel drivers then that fixed this problem. Doesn't seem to be fixed in 12.04 even with the ppa I was using then. What can I do? I couldn't find anything about it on Google because results were unrelated. :( I have Samsung RF-511 notebook with Nvidia card turned off - so it's using only Intel from i7.

    Read the article

  • How to debug slow session start of Gnome 3?

    - by user65521
    After Upgrade from 11.10 to 12.04, the login process of Gnome 3 is extremely slow (It takes in the order of 60 seconds when it was in the order of a few seconds before the upgrade (Harddisk is a SSD!)). Running "top" in a VT shows that gnome-shell is producing about 90% CPU load while dbus-daemon is taking roughly 10%. The moment when CPU-load of gnome-shell drops to normal levels (around 2-3%) corresponds to the time the login process is terminated and the desktop is displayed. De-activating the four gnome-shell extensions (Alternative Status Menu, Quit Button, Remove Accessibility, system-monitor) that I have installed does not have any effect on session start up time. Login to Gnome classic does not show the slow session start. The system logs do not show anything suspicious. Thus, what is the best way to identify the underlying problem?

    Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >