Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 120/346 | < Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• ubuntu's average load never below "0.00 0.01 0.05"

  - by Karma Fusebox

  I have several ubuntu 12.04 VMs running on a ubuntu 12.04 KVM host. Those of the virtual machines that are totally idle with no services (except syslog and the other "small" standard stuff of a fresh installation) show a constant load of "0.00 0.01 0.05" in top/htop as average 1/5/15. When there are "real" applications running, the load averages behave perfectly normal but they never fall below the mentioned values. While this doesn't affect performance at all and could easily be ignored, it screws up the monitoring graphs in a very annoying way: (Notice how load15 behaves nicely if 0.05 for a short time in the right half of the pic) Unfortunately I don't know what diagnostic outputs might be helpful for you, so here's some default stuff: # top top - 16:31:01 up 1:05, 1 user, load average: 0.00, 0.01, 0.05 Tasks: 62 total, 1 running, 61 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.2%sy, 0.0%ni, 99.2%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1019464k total, 73452k used, 946012k free, 6140k buffers Swap: 0k total, 0k used, 0k free, 22504k cached . # free -m total used free shared buffers cached Mem: 995 72 923 0 6 21 -/+ buffers/cache: 43 951 Swap: 0 0 0 . # iostat -x /dev/vda Linux 3.2.0-32-virtual (vm3) 11/15/2012 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 0.25 0.00 0.65 0.20 0.24 98.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util vda 0.14 0.12 0.51 0.22 6.74 1.46 22.50 0.02 23.26 20.64 29.30 7.63 0.56 Need something else? Has anyone ever seen this behavior? Might this be a bug in kvm/ubuntu/kernel 3.x in the end? Thanks a lot!

  Read the article

• PC in POST loop

  - by Antony Scott

  Hi, I have a custom built PC using a Gigabyte GA-EP35-DS3P motherboard with a Q6600 CPU. For the last 2 days it has got itself stuck into a POST loop. Saying that, I don't think it actually got in to the BIOS. It repeatedly lit up the LEDs and then not much more. Sometimes I could see the CPU fan twitch. Today I re-seated the DIMMs and it powered up straight away. Could this be a sign of an impending hardware failure? The PC is hooked up to a UPS, so I don't think it's a power spike or anything like that, as I have 2 other PCs on the same UPS and they're both fine. Yesterday, the first time this happened, I was getting a message which I think said "Scanning BIOS image on hard drive". I've been building and using PCs for well over 25 years and that's a new one on me! I don't think it's an over heating problem, as when the PC does finally boot up the CPU is running at 35-40C. Any help or suggestions would be greatly appreciated.

  Read the article

• Upgrade or replace?

  - by Felix

  My current PC is about four years old, although I have made upgrades to it throughout its existence. The current specs are: (old) Intel Pentium D 2.80Ghz (32K L1 / 2M L2), Gigabyte 945GCMX-S2 motherboard (old) 2.5GB DDR2 (slot0: 512MB @ 533Mhz; slot1: 2GB @ 667Mhz) (new) HIS Radeon HD 4670 - I think this is limited by the motherboard not supporting PCIe 2.0 (?) (old) WD Caviar 160GB - pretty slow (new) WD Caviar Black 640GB (if any more specs are relevant, let me know and I'll add them) Now, on to my question. I've been having performance issues lately, both in video games and in intensive applications. A couple of examples: Android application development (running Eclipse and the Android emulator) is painfully slow (on Linux). I only realized this when, at my new job as an Android dev, both tools are MUCH quicker. (I'm not sure what CPU I have there) The guys at my new job got me NFS Hot Pursuit, in which I barely get like 5-10FPS, even with graphics options turned all the way down My guess is that the bottleneck in my system is my CPU, so I'm thinking of upgrading to a Quad Core i5 + new motherboard + 4GB DDR3 (or more, 'cause I know you'll all jump and say 8GB minimum). Now: Is that a good idea? Is my CPU really a bottleneck, or is the whole system too old and I should replace it? I run Windows 7 on the old, 160GB HDD (which is on IDE, by the way). Could this slow down games as well? Should I get a new drive for Windows if I want to play new games? I know nothing about power supplies. Could that be a problem / will it be a problem if I upgrade to an i5? How come DiRT2 works on full graphics settings (pretty amazing graphics by the way) and NFS Hot Pursuit pulls only 5-10FPS?

  Read the article

• Laptop freezing every few seconds, including screen + sound

  - by zenstealth

  Just a few days ago, my Windows 7 HP dv4170us (1.76Ghz CPU, 1GB Ram) laptop started to freeze every other second where everything on screen and and sound (such as a song playing in iTunes) would just freeze until I bash it violently (without actually breaking the laptop) or wait for a couple of more seconds. I think it started one night when I noticed that a USB mouse of mine stopped working, and it displayed random "Device was not recognized" errors. I just unplugged the mouse and ignored it. Skip forward to the next day, is started freezing, and as of today I can't get my computer to not keep freezing. I tried to backup my files onto an external hdd, but it almost corrupted the drive. I ran 4 complete virus scans using MSSE and MalwareBytes (both quick and full scans), and they all came up clean. In the Task manager, the CPU usage is on a constant max, and so is the RAM (if I have just a few apps running, I only have like 30Mb of free RAM left). Also, on the outside of my laptop, right above where the CPU is located, it's very, very hot. I suspect that something is wrong internally within inside of the computer, but I'm not sure. It also does the same thing when booted into Ubuntu.Does anyone know what could be wrong with it?

  Read the article

• How to find out which process is hogging the linux server?

  - by user1149518

  We have a RHEL server. Today it suddenly became slow. Symptoms - It was responding slow to ping queries from other server. When I try to login using ssh, it was taking about 10 seconds to login. I was able to resolve the problem by doing some guess work. I killed one process which I thought was culprit. Which resolved the problem. Though I would like to know what's proper approach to detect the culprit in such kind of "slow server" situations. Le me know proper way to resolving such slowness issues and decting the process causing the slowness. These were the conditions when the server was slow - # vmstat 3 3 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 1 176 6730868 285052 4899676 0 0 3 4 0 0 1 1 97 1 0 0 0 176 6751576 285064 4899704 0 0 0 115 15307 37171 1 1 96 3 0 0 0 176 6751948 285068 4899700 0 0 0 23 14813 39559 1 1 98 1 0 # top top - 16:38:18 up 150 days, 19:36, 64 users, load average: 1.68, 1.46, 1.44 Tasks: 1287 total, 2 running, 1284 sleeping, 1 stopped, 0 zombie Cpu(s): 1.3%us, 1.7%sy, 0.1%ni, 95.9%id, 0.7%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 16620824k total, 9867124k used, 6753700k free, 287424k buffers Swap: 8193140k total, 176k used, 8192964k free, 4898996k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 26258 khk 34 19 130m 47m 7088 S 11.2 0.3 385:32.42 edm Though I would like to know what's proper approach to detect the culprit in such kind of "slow server" situations. Le me know proper way to resolving such slowness issues and decting the process causing the slowness.

  Read the article

• Imported Hyper-V VM hangs

  - by BParker

  I have a pair of Hyper-V servers (Server 2008 R2 + Hyper-V role). I have duplicated one VM (exported from the first Hyper-V server to the Second) which seems to keep hanging. The VM is running XP SP3, and has the Virtual Additions installed. The first version runs fine, cpu normally around 0%-2% when idle and responds happily. The second version runs very poorly, and keeps running at an idle of around 8% cpu. I have checked the VM with Process Explorer, and the Idle process is (as expected) taking nearly all the cpu time, but what it's not using doesn't seem to show up in any other process. For example at one point idle dipped to 73%, but i could only account for anoth 4.5% in other processes. After some time (around 1-2 days) the VM seems to become so unresponsive, the only way to resurect it is to power-off the VM and reboot (shutdown via the Hyper- V console of via the VM seems to be impossible). Does anyone have any suggestions on how to trace the source of the problem? Thanks

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• Windows XP VM on VMWare ESXi 4.1 "pausing" / blocked occasionally

  - by FelixD

  We have an issue with Windows XP SP3 VMs on VMWare ESXi 4.1.0 (the free version): They sometimes seem to "pause" for several minutes. This happens rarely (maybe once a month per VM, at least noticed only that often), but still is an issue for us. It happens for three different but similar VMs on three pretty different hosts (different hardware). I have the feeling that the "pausing" is not actually the CPU blocking, but probably the harddisks, but not 100% sure. The servers have one IDE disk (C:) and one SCSI (D:) and it might be either of the two. I have seen scheduled tasks simply not starting for up to 9 minutes and then running normally again with normal speed. They were totally blocked. This is not a load issue, the VMWare hosts have average load and the VMs in question already have reserved CPU resources plus high priorities for CPU and disk. The Windows boxes run mainly MySQL, Tomcat, FileZilla server, Cygwin stuff, Java + R applications, VMWare client, Elusiva Terminal Server pro, Nagios client. Not sure if this might be related with any of that software (e.g. Elusiva). Trying to debug this, there was nothing visible in Windows Event log, other logs in C:\Windows, VMWare events etc. Unfortunately the vmware.log file ends with "Log throttled". We found that we ran into 2 VMWare bugs there: The VMWare client writes lots on bogus messages in the vmware.log, which we now disabled (log level error setting) plus the bug that VMWare does not unthrottle the log (at least so far despite VM reboots). I know there is not much guidance and that may also be the reason why I so far didn't find anything related on the web or on ServerFault, but maybe some of this rings a bell with someone? Or please direct me to what more info to post. I hope that the vmware.logs get unthrottled eventually (can't easily restart the hosts at the moment). Thanks for any input!

  Read the article

• Optimize Apache performance

  - by Phliplip

  I'm looking for ways to optimize our current web server hosted in-house. I'm trying to supply as much relevant information below. Please let me know if you would require additional information in order to assist. Server is running 1 single website, which is an online pizza ordering platform built on Zend Framework (ver1). On traffic stats from the last month aprox 6.000 pageloads per day, concentrated mainly around dinnertime. Around 1500 loads/hour peaks in that period. We recently upgraded from a 2/2mbit aDSL-line to 100/100mbit fiber, and we still have performance issues at dinner time. We assumed the 2mbit was the issue. Website is pretty snappy in low-load periods. Hardware CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (3000.13-MHz K8-class CPU) Mem: 328M Active, 4427M Inact, 891M Wired, 244M Cache, 623M Buf, 33M Free Swap: 16G Total, 468K Used, 16G Free (6GB physical, 16GB swap) Filesystem Type Size Used Avail Capacity Mounted on /dev/ad7s1a ufs 4.8G 768M 3.7G 17% / devfs devfs 1.0K 1.0K 0B 100% /dev /dev/ad7s1g ufs 176G 5.2G 157G 3% /home /dev/ad7s1e ufs 4.8G 2.8M 4.5G 0% /tmp /dev/ad7s1f ufs 19G 3.5G 14G 19% /usr /dev/ad7s1d ufs 4.8G 550M 3.9G 12% /var Server OS FreeBSD 8.2-RELEASE Software apache-2.2.17 php5-5.3.8 mysql-server-5.5 Apache footprint (example, taken from # top) 31140 www 1 45 0 377M 41588K lockf 2 0:00 0.00% httpd 31122 www 1 44 0 375M 35416K lockf 2 0:00 0.00% httpd 31109 www 1 44 0 375M 38188K lockf 2 0:00 0.00% httpd 31113 www 1 44 0 375M 35188K lockf 2 0:00 0.00% httpd Apache is using the prefork MPM, APC (Alternative PHP Cache). SSL module is loaded, but not utilized (as in don't really work, thus not used). There is a file containing settings for MPM modules, but as i see it's not included in the httpd.conf file, the include line is commented out. Thus i would guess that the prefork MPM is working of default values too. Here are some other Apache conf values that i found - which are included in https.conf Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 UseCanonicalName Off HostnameLookups Off

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Which MacBook(Pro) for running Visual Studio 2010 on VMWare Fusion on a Mac?

  - by Greg

  Hi Anyone have experience running Visual Studio 2010 on a MacBook or MacBook Pro? (via VMWare fusion) Any feedback / advice based on your experience re what level of MacBook Pro (i.e. CPU type, CPU speed) you would target to get reasonable/good performance from VS2010 on it? (I'm just concerned about getting a base level MacBook Pro 13" 2.4GHz Core2Duo whether I would be frustrated with performance or not)

  Read the article

• Universal iPad App rejected because of launch crash that I can't reproduce

  - by Enrique R.

  Hello everyone, I'm very frustrated with this problem. After one week of waiting my universal iPad app has been rejected because "is crashing on launch on iPad running iPhone OS 3.2 and iPhone 3GS running iPhone OS 3.1.3 and Mac OS X 10.6.2." Unfortunately I can't replicate the problem, I've tested in debug and release modes and the app works just fine. I even created an ad-hoc configuration and test it in other devices and everything works fine. I should clarify that this is an update to a current iPhone application and I'm using the same distribution profile as the original iPhone app. Also, I checked everything before building the universal app following this entry: http://iphonedevelopment.blogspot.com/2010/04/converting-iphone-apps-to-universal.html Here are the crash logs that Apple sent me: Incident Identifier: 3E0D4A3B-2896-444D-BCBE-6C0CA1A66A90 CrashReporter Key: 18b5124ea5f657227c5f202a27ed707379b3e2e7 Process: Transfer [982] Path: /var/mobile/Applications/E9062465-7EA6-424C-9C61-D9DBCC7C915A/Transfer.app/Transfer Identifier: Transfer Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2010-05-04 15:35:57.399 -0700 OS Version: iPhone OS 3.1.3 (7E18) Report Version: 104 Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x00000001, 0x3eaa2188 Highlighted Thread: 0 Backtrace not available Unknown thread crashed with ARM Thread State: r0: 0x00002f90 r1: 0x00000000 r2: 0x385242d8 r3: 0x0000010d r4: 0x00000000 r5: 0x00000000 r6: 0x00000000 r7: 0x00000000 r8: 0x2ffffba0 r9: 0x2fffef90 r10: 0x00000000 r11: 0x00000000 ip: 0x0000000c sp: 0x2ffffba4 lr: 0x2fe08727 pc: 0x00002f94 cpsr: 0x40000010 Binary Images: 0x1000 - 0x25fff +Transfer armv7 /var/mobile/Applications/E9062465-7EA6-424C-9C61-D9DBCC7C915A/Transfer.app/Transfer 0x2fe00000 - 0x2fe24fff dyld armv7 /usr/lib/dyld .... And the one for the iPad: Incident Identifier: 3B170A28-C8E2-4018-8166-E69432A65070 CrashReporter Key: 4a0194e3f60559127faef2b014df605e4c47b981 Hardware Model: iPad1,1 Process: Transfer [533] Path: /var/mobile/Applications/400EE394-7BEE-45CA-942D-DBDC106360FF/Transfer.app/Transfer Identifier: Transfer Version: ??? (???) Code Type: ARM (Native) Parent Process: launchd [1] Date/Time: 2010-05-04 15:37:17.505 -0700 OS Version: iPhone OS 3.2 (7B367) Report Version: 104 Exception Type: 00000020 Exception Codes: 0x8badf00d Highlighted Thread: 0 Application Specific Information: com.erclab.iphone.photodownload failed to launch in time elapsed total CPU time (seconds): 1.150 (user 0.560, system 0.590), 6% CPU elapsed application CPU time (seconds): 0.150, 1% CPU Thread 0: 0 libobjc.A.dylib 0x33561996 0x33560000 + 6550 1 libobjc.A.dylib 0x33564986 0x33560000 + 18822 2 libobjc.A.dylib 0x33564cb2 0x33560000 + 19634 ... The app does not do anything other than loading a local HTML into a web view after the app it's launched so I don't understand why it says "failed to launch in time" Any help will be very much appreciated.

  Read the article

• How to using Mono for windows to Access WMI to get hardware Id?

  - by guaike

  Hi, folks Recently,I need run my winforms App on mono for windows platform,But i am using WMI to get MAC address and CPU ID in my original code,switch to Mono for Windows,it does not working. I found that "System.Management.dll" APIs is not implemented in Mono. How can i do?How to get CPU ID,MAC Address, Hard Disk Serial Number,and Motherboard Serial Number with out WMI?

  Read the article

• What is the impact of Thread.Sleep(1) in C#?

  - by Justin Tanner

  In a windows form application what is the impact of calling Thread.Sleep(1) as illustrated in the following code: public Constructor() { Thread thread = new Thread(Task); thread.IsBackground = true; thread.Start(); } private void Task() { while (true) { // do something Thread.Sleep(1); } } Will this thread hog all of the available CPU? What profiling techniques can I use to measure this Thread's CPU usage ( other than task manager )?

  Read the article

• What are the recommended BEST CASE hardware requirements for TFS 2010

  - by Doug

  Hi guys, i have installed TFS 2010 in a 2 server setup with an App Tier server and a SQL Server and am not 100% happy with the performance. Both are running in VM's on SAN disks and have been given the following virtual hardware each: Windows 2008 R2 1 CPU @ 2.8Ghz 2gb RAM what should i lift - neither machine is hammered but both do go up to 80% when people are doing things on them - should i add another CPU to each - usually this is now required in a VMWARE setup but i don't know if TFS 2010 takes advantage of an extra core??? thank you in advance :-)

  Read the article

• how can we find that this processor supports how much memory?????

  - by Zia ur Rahman

  I have just started the Assembly language programming and in the first lecture our teacher told us about intel 8080 and intel 8085 and he said there was 64k memory with these processor. Now i want to know that how we find this amount of memory with specific processor, for example i have a processor 1.8 Ghz , now how i can find out the amount of memory that can be used with this processor. what i am trying to ask is tell me the method how we can find out this amount of memory?

  Read the article

• How to open DataSet in Visual Studio 2008 faster?

  - by Ekkapop

  When I open DataSet in Visual Studio 2008 to design or modify it, it always take a very long time (more than five minutes) before I can continue to do my job. While I'm waiting I can't do anything on Visual Studio, moreover CPU and memory usage is growth dramatically. I want to know, Is it has anyway to reduce this waiting time? Hardware - Desktop CPU: Intel Q6600 Memory: 4 GB HDD: 320 GB 7200 rpm OS: Windows XP 32 bit with Service Pack 3

  Read the article

• Tuning MySQL to take advantage of a 4GB VPS

  - by alistair.mp

  Hello, We're running a large site at the moment which has a dedicated VPS for it's database server which is running MySQL and nothing else. At the moment all four CPU cores are running at close to 100% all of the time but the memory usage sticks at around 268MB out of an available 4096MB. I'm wondering what we can do to better utilise the memory and reduce the CPU load by tweaking MySQL's settings? Here is what we currently have in my.cnf: http://pastie.org/private/hxeji9o8n3u9up9mvtinbq Thanks

  Read the article

• memcpy vs assignment in C

  - by SetJmp

  Under what circumstances should I expect memcpys to outperform assignments on modern INTEL/AMD hardware? I am using GCC 4.2.x on a 32 bit Intel platform (but am interested in 64 bit as well).

  Read the article

• About x86 architecture assembly and others

  - by caramel1991

  I have the wisdom to learn assembly language,so I search through the internet for the information about this language,and came across some page telling that assembly is a low level native language and varied from one to another processor,so I just wonder,I'm currently running an intel based processor,I've no idea whether it is x86 or what,but I just wanna know,Does it possible for me to learn other processor arhchitecture assembly on my pc??Besides,is there any good books that could guide me through learning the intel architecture assembly.

  Read the article

• About x86 architecture assembly and others

  - by caramel1991

  I have the wisdom to learn assembly language,so I search through the internet for the information about this language,and came across some page telling that assembly is a low level native language and varied from one to another processor,so I just wonder,I'm currently running an intel based processor,I've no idea whether it is x86 or what,but I just wanna know,Does it possible for me to learn other processor arhchitecture assembly on my pc??Besides,is there any good books that could guide me through learning the intel architecture assembly.

  Read the article

• General confusion with assembler

  - by gnrlcf

  So I took a look at the x86 assembly language; All the commands are pretty clear but: I don't see anything that can actually trigger something in the computer like: Access RAM and not only CPU registers, read from the HDD, etc. How do you go beyond computations in the CPU with assembler?

  Read the article

• When should a uniform be used in shader programming?

  - by Phineas

  In a vertex shader, I calculate a vector using only uniforms. Therefore, the outcome of this calculation is the same for all instantiations of the vertex shader. Should I just do this calculation on the CPU and upload it as a uniform? What if I have ten such calculations? If I upload a lot of uniforms in this way, does CPU-GPU communication ever get so slow that recomputing such values in the vertex shader is actually faster?

  Read the article

< Previous Page | 116 117 118 119 120 121 122 123 124 125 126 127  | Next Page >