Search Results

Search found 17621 results on 705 pages for 'just my correct opinion'.

Page 116/705 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Resolution Chart Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

• How do photoshop slices and layer comps interact?

  - by Steve314

  I'm interested in using Photoshop (I have CS2) for some user interface design. I was hoping to be able to use slices and layer comps to mark out particular elements, and use Javascript scripting to export multiple graphics files and text descriptions (positions and sizes of slices mainly) that will be used by my program. My problem is that I've never used Photoshop for web design, or otherwise used slices, and I'm not confident that I understand how they interact with layer comps. This is what I believe (and hope) is correct... Manual slices aren't affected by layer comps in any way - they aren't saved as part of a layer comp. The same manual slices will be active irrespective of which layer comp is selected. Layer-based slices aren't directly affected by layer comps, but they are indirectly affected in that the layer comp saves details of layer position and style. Thus selecting a layer comp may move a layer and change its style, affecting the location and size of its layer-based slice, or may effectively disable the slice by hiding the layer. Automatic slices aren't directly affected by layer comps, but are indirectly affected due to changes to the layer-based slices. So, layer based slices (which are my main interest) may move, may change size (to accomodate a style such as a drop shadow), and may be effectively disabled by the layer being hidden. Other details (and all details of manual slices) will remain constant irrespective of which layer comp is active. Is that correct?

  Read the article

• Networking Problem MrxSmb event 50 "Delayed Write Failed" errors occurring all of the sudden

  - by Johnny Musso

  JUST THIS MONTH, we have started getting reports from a number of very stable clients that MrxSmb event id 50 errors keep appearing in their system event logs. Otherwise, they do not appear to have any networking problems except that there is a critical legacy application which seems to either be generating the MrxSmb errors or having errors occur because of them. The legacy application is comprised of 16 bit and 32 bit code and has not been changed or recompiled in many years. It has always been stable on Windows XP systems. The customers that have the problem usually have a small (5 clients or less) peer to peer network with all Windows XP systems. All service packs are loaded on the XP machines. Note: The only thing that seems to correct the problem is disabling opportunistic locking. I don't like this solution because it seems to slow down the network and sometimes causes record locking issues between users (on some networks). Also, this seems to have just started happening - as if a Windows update for XP has caused it? However, I have removed recent updates and it did not correct the issue. Thanks in advance for any help you can provide.

  Read the article

• Domain joined computer unable to access servers through VPN

  - by kscott

  Our servers are in a virtual off site hosting center, our office has a vpn connection to the data center, but for reasons I don't understand we also have to connect to the Citrix Access Gateway (CAG) client in order to access the servers. I am a programmer with rather limited ops knowledge including a weak grasp of networking and terminology. Bear with me. I was just given a new laptop, which is a 64 bit Windows 7 system unlike my previous 32 bit Windows XP desktop which was able to connect without issue. My laptop has been joined to the domain so that I login with my AD credentials, I am able to connect to the CAG and get authenticated, and after doing this I can ping our servers and they resolve to the correct internal IP addresses, but I am unable to use remote desktop to the servers, connect to SQL servers through my local SQL Management Studio, navigate to them through the file system, or view any of our internal intranet websites. All of which I was able to do previously. I have tried turning off my Windows firewall and the problem remains, the DNS servers are set to the correct IPs of our domain controllers, and the ops guys here are a little stumped. Does any one have any suggestions?

  Read the article

• Serving only certain files from a directory to users on IIS7

  - by HarbingTarbl

  I'm have a need to show the most up to date version of a certain file in a directory to users who access a folder on my site (lets call this folder logs). I can't just move the file into the folder as another process relies on being able to find and edit this file while it is running. At first I had thought I could just create a folder on my site, give it the correct permissions and then create a symbolic link to the file. However it seems IIS7 does not follow symlinks. Another solution would be to create a phpscript that pulls the correct file and displays it, but that felt like over-engineering the solution. I know that on Apache this would be simple, but I can't figure out how to do it with IIS7. To give an idea of the folder structure I'm working with. The directory looks like this. Root --File I need to serve. --File containing plain text passwords. --Other folders/files. I can't move any of these files. If I just serve the entire directory using Virtual Directories in IIS I'll also be sharing files and folders containing configuration and other sensitive information.

  Read the article

• Total newb having SSH and remote MySQL access problems

  - by kscott

  I don't often work with linux or need to SSH into remote MySQL databases, so pardon my ignorance. For months I had been using the HeidiSQL client application to remotely access a MySQL database. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 MySQL host: theHostnameOfTheRemoteServer.com MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

  Read the article

• Mac OSX and root login enabled

  - by reza

  All I am running OSX 10.6.8 I have enabled root login through Directory Utility. I have assigned a password. I get an error when I try to ssh root@localhost. ssh -v root@localhost OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/rrazavipour-lp/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/rrazavipour-lp/.ssh/identity type -1 debug1: identity file /Users/rrazavipour-lp/.ssh/id_rsa type 1 debug1: identity file /Users/rrazavipour-lp/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.2 debug1: match: OpenSSH_5.2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /Users/rrazavipour-lp/.ssh/known_hosts:47 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /Users/rrazavipour-lp/.ssh/id_dsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /Users/rrazavipour-lp/.ssh/identity debug1: Offering public key: /Users/rrazavipour-lp/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: keyboard-interactive Password: debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Authentications that can continue: publickey,keyboard-interactive debug1: No more authentication methods to try. Permission denied (publickey,keyboard-interactive). What I am doing wrong? I know I have the password correct.

  Read the article

• Leopard mail.app quoted-printable weirdness

  - by pehrs

  I am not sure if this is a bug in mail.app, or a configuration I just can't find. It might also be a strange sideffect of GPGmail. Mail.app correctly displays all e-mails on my IMAP server, except for the e-mails in my "Sent Messages" folder. In the sent messages folder it messes up åäö, in typical quoted-printable with wrong char-set fashion. They become ‰ˆ. When looking at the source of the e-mails it seems like the header generated by mail.app is correct: Message-Id: <> From: To: In-Reply-To: <> Content-Type: multipart/signed; protocol="application/pgp-signature"; micalg=pgp-sha1; boundary="Apple-Mail-4--741321197" X-Smtp-Server: smtp.example.com Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (Apple Message framework v936) Subject: Example subject Date: Fri, 26 Mar 2010 10:14:14 +0100 References: <> X-Pgp-Agent: GPGMail 1.2.0 (v56) This is an OpenPGP/MIME signed message (RFC 2440 and 3156) --Apple-Mail-4--741321197 Content-Type: text/plain; charset=ISO-8859-1; format=flowed; delsp=yes Content-Transfer-Encoding: quoted-printable <Text here with =E5=E4=F6> --Apple-Mail-4--741321197 content-type: application/pgp-signature; x-mac-type=70674453; name=PGP.sig content-description: This is a digitally signed message part content-disposition: inline; filename=PGP.sig content-transfer-encoding: 7bit -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.12 (Darwin) iEYEARECAAYFAkus62kACgkQlIRLofxhDjYnnwCcDmCXuMGsKlh3a418s12coJgn 36sAoKMdkP3+g/OMK+Ps7AbjQq4Nbqzv =XMko -----END PGP SIGNATURE----- --Apple-Mail-4--741321197-- Thunderbird has no problem displaying the messages. So, how can I get mail.app to use the correct charset?

  Read the article

• Extending home network using multiple access point originating from another access point

  - by cyberjar09

  I have a home network with the current setup (RJ45 running from main router to access point) : +-------------+ +--------------+ | 192.168.2.1 | |192.168.2.2 | | router +--------------->access point 1| +-----^-------+ +--------------+ | | +-----+--------+ | 192.168.1.1 | | modem | +-----^--------+ | | | | +--+--+ | ISP | +-----+ However I would like to extend the network to two more floors in the house via the existing Access Point (router is too far and not reachable using a network cable, hence I need to extend using current access point). Please see diagram below : +-------------+ +--------------+ +----------------+ | 192.168.2.1 | |192.168.2.2 | | 192.168.2.3 | | router +--------------->access point 1+----------> access point 2 | +-----^-------+ +--------+-----+ +----------------+ | | | | +-----+--------+ | | 192.168.1.1 | | | modem | | +-----^--------+ | +----------------+ | +----------------> 192.168.2.4 | | | access point 3 | | +----------------+ | +--+--+ | ISP | +-----+ Q1 : is this setup possible? Q2 : if possible, will I have to do anything different from what I did to setup access point 1? edit 1 : I am trying to study the dd-wrt documentation to see which would be the correct mode of operation for me Linking Routers but Im confused because I dont see any info on how to use an existing Access point to extend the signal of the SSID. If anyone could point me to the correct wiki for how I should setup AP2 and AP3 based on AP1, it would be very helpful. For AP1, I did the following Use static IP and setup same SSID as primary wireless router use same security as primary wireless router make AP1 point to 192.168.2.1 (primary router) for DHCP Thanks in advance.

  Read the article

• Exchange Online SMTP Not Working With Any Email Client

  - by emre nevayeshirazi

  I am trying to switch our company mail server to exchange online. I have successfully added my domain and users and can send and receive mails through Outlook Web App. I can also send and receive if I configure my Outlook 2013 client using Exchange protocol. However, some folks in company are using Thunderbird and some old Outlook Clients. For those, I tried to connect to Exchange via IMAP/SMTP. This is what I use, For incoming, IMAP / Port : 993 with SSL / Host : outlook.office365.com For outgoing, SMTP / Port : 589 with TSL / Host : smtp.office365.com I can receive emails, however I could not be able to send emails. I keep getting An error occurred while sending mail. The mail server responded: 4.3.2 Service not active. Please verify that your email address is correct in your Mail preferences and try again. My username and password are correct, I am using my mail address as my username to mailbox. I also tried sending mail via C# application which was working for outlook.com and gmail.com SMTP settings. It also fails to send emails and returns the same error code. I thought TB and other old clients such as Office 2003 might not support Exc. Online so I tried same settings in Office 2013. It successfully connected my mailbox when checking for configuration but failed in sending test message and returned the same error code. Configuration for incoming and outgoing mailbox are taken from here. They are also available on Office 365 user page and they are same. What could be the reason for error ?

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• NETKEY IPsec and ARP

  - by Shawn J. Goff

  I'm wondering if I have the correct routing setup for an IPsec tunnel. I have control over the IPsec endpoints and the hosts connected to one side. These hosts are connecting to the tunnel so that they have access to the network on the other side of what I will call the IPsec server. I don't have control of the network upstream of this server. Normally, the IPsec server will not respond to ARP requests for the hosts on the other side of the tunnel. So when a packet arrives for one of my hosts the server gets ARP requests, but the upstream router gets no response, and cannot construct the ethernet frame to send me the packets. If I was using one of the swan stacks, I would have a separate interface, and I'd probably just need to turn on proxyarp, but I'm using NETKEY, which doesn't use a separate interface for the tunnel. To solve the problem for now, I have added an eth0.5 vlan to the IPsec server, turned on proxyarp for that interface, and added all routes my hosts addresses to that interface so that it will respond to those ARP requests (and will therefore get relevant packets routed to it). This works, but it feels wrong. What is the correct way to get the upstream router to send me the traffic for these hosts?

  Read the article

• Basic Apache setup is not seeing my site

  - by Jakobud

  Sorry that is a horrible thread subject, but I cannot think of a better more descriptive subject. We are running a Fedora 11 server that is currently hosting some CRM on it. I want to use a VirtualHost directive to add another site to the server. So I created this conf: /etc/httpd/conf.d/mysite.ourdomain.com.conf And here is the content: <VirtualHost *:80> ServerName mysite.ourdomain.com DocumentRoot /www/mysite ServerAdmin [email protected] ErrorLog /var/log/mysite.ourdomain.com-error.log CustomLog /var/log/mysite.ourdomain.com-access.log common </VirtualHost> I restarted apache, getting the following warning: [warn] NameVirtualHost *:80 has no VirtualHosts From what I read, this warning is not related and I can ignore it and my site should still be up and running, correct? (I'll troubleshoot this error later if so) Well I have our DNS server setup to point mysite.ourdomain.com to goto this server. I can ping it and it points to the correct LAN IP, etc.. Now when I try to access it in the browswer I get nothing. It just says Connecting... and never gets there. If I try mysite.ourdomain.com or the IP address, neither one doesn't get there. It's a very simple and basic apache setup so I'm not sure what I'm doing wrong... Like I said, the other thing that is running on this server is a crm and it's .conf looks something like this: Listen x.x.x.x:443 <VirtualHost x.x.x.x:443> ServerAdmin [email protected] ServerName crm.ourdomain.com ErrorLog /var/log/httpd/ourdomain/crm-error.log CustomLog /var/log/httpd/ourdomain/crm-access.log common DocumentRoot /www/ourdomain/crm <IfModule mod_dir.c> DirectoryIndex /index.php </IfModule> </VirtualHost> There is also some LDAP authentication stuff in that config but I left it out cause I assumed it wasn't necessary to post. Anyone have any clue where I should start or what settings I can post from httpd.conf that would help?

  Read the article

• Asterisk, IAXModem & Hylafax how-tos?

  - by Brian Postow

  I'm trying to set up Asterisk and IAXModem to send faxes via T38 (Yes, I know I'm swatting a fly with a Buick...) However, since I'm trying to do something so small with a product so large, I'm having trouble finding samples or how-tos that show me how to set this up. I've got all three installed, and I THINK I have my IAXModem config correct. I'm pretty sure that I have Hylafax correct (I've used it with T38Modem) so, I need to know which of the Asterisk samples I need to use, and how to use them. I think I want to use some combination of iax.conf, iaxprov.conf, sip.conf and sip_notify.conf. But I'm not sure where to put them, or what to change... I'm sure that the answer is RTFM, but I'm not sure WHICH M, or where in it to R... thanks. EDIT On a mailing list, someone told me that this actually WON'T WORK because IAX doesn't do T38. So, is there some other way to get Asterisk to work with Hylafax and send T38? I know that Asterisk does T38, the question is how to get the data from Hylafax and back...

  Read the article

• Providing high availability and failover using MySQL on EC2

  - by crb

  I would like to have a highly-available MySQL system, with automatic failover, running on Amazon EC2 instances. The standard approach to solving this is problem Heartbeat + DRBD, but I've found a lot of posts suggesting DRBD doesn't work on EC2, though none saying exactly why. Obviously, a serial heartbeat or distinct network is out of the question in the virtualised environment. It would also be good to have the different servers be in different availability zones, but we're getting into a much harder problem there. What are peoples' opinion on having a high uptime solution in "the cloud"?

  Read the article

• MAC OS for Intel based PCs

  - by Maven

  I have an Intel dual core PC with 4GB of RAM and Graphics card. For on of my student Assignment I need to install Latest possible MAC OS on my system as a secondary OS. Like on boot it asks me that which OS i want to boot with Win 8.1 or Mac Os.. I searched on the internet and found two conflicting opinion some people said there are few MAC OS Version which can be directly installed on Intel PCs some says there aren't? I am here to get rid of the confusion that is an official latest possible MAC OS version for Intel based PCs? If not what are my options if I want to run MAC OS on my PC. Please not that Virtualization options won’t work for me, it has to be working as full OS not an os inside another.

  Read the article

• Formula to calculate probability of unrecoverable read error during RAID rebuild

  - by OlafM

  I need to compare the reliability of different RAID systems with either consumer or enterprise drives. The formula to have the probability of success of a rebuild, ignoring mechanical problems, is simple: error_probability = 1 - (1-per_bit_error_rate)^bit_read and with 3 TB drives I get 38% probability to experience an URE (unrecoverable read error) for a 2+1 disks RAID5 (4.7% for enterprise drives) 21% for a RAID1 (2.4% for enterprise drives) 51% probability of error during recovery for the 3+1 RAID5 often used by users of SOHO products like Synologys. Most people don't know about this. Calculating the error for single disk tolerance is easy, my question concerns systems tolerant to multiple disks failures (RAID6/Z2, RAIDZ3 and RAID1 with multiple disks). If only the first disk is used for rebuild and the second one is read again from the beginning in case or an URE, then the error probability is the one calculated above squared (14.5% for consumer RAID5 2+1, 4.5% for consumer RAID1 1+2). However, I suppose (at least in ZFS that has full checksums!) that the second parity/available disk is read only where needed, meaning that only few sectors are needed: how many UREs can possibly happen in the first disk? not many, otherwise the error probability for single-disk tolerance systems would skyrocket even more than I calculated. If I'm correct, a second parity disk would practically lower the risk to extremely low values. Am I correct?

  Read the article

• Which e-reader for O'Reilly books?

  - by Tim

  Most of my programming books are from O'Reilly. Several of them need to be updated, and I'm thinking of going for an e-reader this time. O'Reilly sell their e-books as a multi-format bundle (PDF, EPUB and Mobipocket (Kindle)). Has anyone done a comparison of the formats as for suitability on a small e-reader screen? In Europe, the Kindle DX is not (yet?) available, so I'm not sure whether a Kindle or a Sony (or some other reader) is best suited for these books. Disregarding other advantages/disadvantages of the different readers for now, which one in your opinion gives the best experience with O'Reilly books in particular (or programming books in general)?

  Read the article

• A minimal Linux distribution for my ASUS EEE PC

  - by Andrioid

  I recently bought myself a ASUS EEE 1000HE and I intend to use it for note-taking and light browsing at the University. The machine has a 10" screen so the interface needs to be very compact. I've already tried: EEEbuntu: Very nice driver support and out of the box experience. But I feel that it is too slow booting and the general experience is too heavy in my opinion. Moblin 2: Looks very cool, boots just fine but is way too unstable to use. Also find it annoying that I can't find hotkey documentation anywhere. Any Netbook OS recommendation welcome (although those specific to my model would be great). There is an entire jungle of distributions out there, so if you've been on a safari, please share your experience.

  Read the article

• Processing-time billing in Amazon EC2

  - by Rafael Almeida

  Hi all! I think my question is fairly basic, but I would like a clarification: in the Pricing part of AWS we can see that Amazon charges people around .10 by the 'instance computing hour'. I've seen in a blog post somewhere (can't remember where exactly, and even if I did I think it was in Portuguese anyway) that this way your minimum monthly payment would be $72 (= .10 $s/hour x 24 hours x 30 days). Is this correct? (I don't think it is!) In my understanding is that this 'virtual computing time' is only used when your machine is actually doing something (serving pages, serving the admin via ssh, whatever), so real billable usage would be less than 720 hours/month in most webserver scenarios. Is my view correct? If it is, then it leads me to another question: is it economically interesting to buy access to one of these instances for testing? I mean, would I have the 'freedom' to 'forget' about it for a month and receive a very-close-to-zero (as in, a few cents) bill? Do you do it/know of anybody who does? Any thoughts on the matter (as in, "yes, it's a good idea", or "yes, but there's this 'gotcha': ...", or "no, nobody does it because of...")? PS: sorry for the loong question text. I highlighted the main questions for easy view. Also, I'm not sure if this question is actually more than one and if it's desirable for the community, so, sorry if it is too! Thanks in advance!

  Read the article

• SQL Server Instancing: Should I use multiple instances or databases?

  - by Spence

  I have a reasonable server connected to a SAN which will be running SQL servers for multiples of the same application. There are no security issues with one application being able to read anothers database. We are unfortunately in 32 bit windows as well. I'm of the opinion that it would be better to use one instance on the server, enable AWE so that the server instance can use almost all of the ram we have and then run each of the databases in the one instance. However I've been overruled by the gods of the IT department on this one, so I'm really curious to hear your thoughts on this. From a performance point of view, am I incorrect that one instance of SQL is better than two? I know that we could do some failover stuff, but doing that on one blade only seems like overkill to me..

  Read the article

• Unix: Files starting with a dash, -

  - by Svish

  Ok, I have a bunch of files starting with a dash, -. Which is not so good... and I want to rename them. In my particular case I would just like to put a character in front of them. I found the following line that should work, but because of it dash it doesn't: for file in -N*.ext; do mv $file x$file; done If I put an echo in front of the mv I get a bunch of mv -N1.ext x-f1.ext mv -N2.ext x-f2.ext Which is correct, except of course it will think the first filename is options. So when I remove the echo and run it I just get a bunch of mv: illegal option -- N I have tried to change it to for file in -N*.ext; do mv "$file" "x$file"; done but the quotes are just ignored it seems. Tried to use single quotes, but then the variable wasn't expanded... What do I do here? Update: I have now also tried to quote the quotes. Like this: for file in -N*.ext; do mv '"'$file'"' '"'x$file'"'; done And when I echo that, it looks correct, but when I actually run it I just get mv: rename "-N1.ext" to "x-n1.ext":: No such file or directory I have just no clue how to do this now... sigh

  Read the article

• Apache2.2 not responding on Windows 7 desktop

  - by Adam

  Afternoon! I'm having some trouble with Apache2.2 on Windows 7. For over a year it's been running no problem, but all of a sudden requests have just stopped responding. They don't ever time out, the browser just keeps on waiting for a response, which makes me think it's something blocking communication with Apache. Interestingly though, if I stop Apache the requests fail immediately. The Apache service is running, and using netstat I can see it listening on port 80 as configured: TCP 127.0.0.1:80 0.0.0.0:0 LISTENING If I stop the Apache service, that line disappears. I have an entry within my hosts file for each VHost I'm trying, all pointing to 127.0.0.1. Each VHost is configured to *:80. Nothing however is getting recorded in the access or error (at debug level) log files. I've verified the file paths are correct, even though they were never changed. Neither is anything getting recorded within Windows' Event Log. The problem showed up when I added a new VHost and restarted, however I hadn't been using it for a couple of days prior so I don't believe it's the config change. I have performed a syntax check to be sure, and when starting from the command prompt no errors are reported there. I do have Windows Firewall running, however I've verified the Apache rule is correct and tried turning it off to ensure that wasn't the problem. I've reinstalled Apache, in the hope it might magically fix something using the default config, but still no joy. I've also tried using a different port. I'm completely lost for ideas now. Can anybody help? Cheers Adam

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• Unix Interview Question

  - by Rachel

  I am giving some interviews right now and recently I was asked this questions in Interview and I was not sure of the answer, in your opinion are this kind of questions worthwhile for Interview process and if yes than how would you go about approaching this kind of questions. How to get number of files in directory without using wc ? How to get all files in descending order on size ? What is the significance of ? in file searching ? Would appreciate if you can provide answers for this questions so that I could learn something about them as I am not sure for this questions.

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >