Search Results

Search found 11313 results on 453 pages for 'calavera info'.

Page 117/453 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Realtek RTL8111/8168B wired network doesn't work anymore

  - by Radar4002

  This sounds like it's a common problem upgrading 11.04, but I am having trouble finding a common solution, and one that will work for me. I just applied updates via the update manager and now my wired network connection is down. I know Ubuntu network settings is the issue, because I have a dual-boot with Win 7 and my network/internet is fine on Win 7. I don't know too much about networking, so what can I do to trouble shoot this issue? I can choose an older grub version, 2.6.38-8 instead of 2.6.38-11 and this does not resolve the issue. Here is my lspci result: 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B) 00:04.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) 00:05.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port E) 00:06.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port F) 00:07.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port G) 00:09.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port H) 00:0a.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (external gfx1 port A) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] (rev 40) 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 41) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:15.0 PCI bridge: ATI Technologies Inc Device 43a0 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 07:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 07:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 08:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) Here is my sudo lshw -class network: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 03 serial: 6c:f0:49:e7:72:e8 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:9e00(size=256) memory:fceff000-fcefffff memory:fcef8000-fcefbfff memory:fce00000-fce1ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth1 version: 03 serial: 6c:f0:49:e7:72:ea size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:8e00(size=256) memory:fddff000-fddfffff memory:fddf8000-fddfbfff memory:fdd00000-fdd1ffff

  Read the article

• installArchives() failed: perl: warning: Setting locale failed.

  - by Alwin Doss

  I get the following error while updating ubuntu 12.04 LTS installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 430284 files and directories currently installed.) Preparing to replace libxml2-dev 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2-dev_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2-dev ... Preparing to replace libxml2 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2 ... Preparing to replace gstreamer0.10-plugins-bad 0.10.22.3-2ubuntu2 (using .../gstreamer0.10-plugins-bad_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement gstreamer0.10-plugins-bad ... Preparing to replace libgstreamer-plugins-bad0.10-0 0.10.22.3-2ubuntu2 (using .../libgstreamer-plugins-bad0.10-0_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement libgstreamer-plugins-bad0.10-0 ... Preparing to replace ubuntu-keyring 2011.11.21 (using .../ubuntu-keyring_2011.11.21.1_all.deb) ... /var/lib/dpkg/info/samba4.postinst: 14: /var/lib/dpkg/info/samba4.postinst: /usr/share/samba/setoption.pl: Permission denied dpkg: error processing samba4 (--configure): subprocess installed post-installation script returned error exit status 126

  Read the article

• LSI SAS 9240-8i on Ubuntu 12.04 Hangs on Modprobe

  - by Francois Stark

  I used the LSI 9240-8i card on a smaller Intel motherboard with no problems in Ubuntu, with ZFS. However, we rebuilt the server to allow for more disks, using the ASROCK X79 Extreme 11 motherboard. It has 7 PCIe slots, and a LSI 2008 on-board. At first I thought the LSI 9240, when plugged in to PCIe, clashed with the on-board LSI 2008. Every time I plugged in the LSI 9240, modprobe would hang. Then I completely disabled the on-board LSI 2008, and the problem persisted. Last night it booted perfectly ONCE - all LSI cards and connected disks visible... However, all subsequent reboots failed. Both LSI cards' bios scans appear and they both see the disks connected to them, but Ubuntu modprobe hangs. Some selected dmesg lines, with both LSI cards enabled: [ 190.752100] megasas: [ 0]waiting for 1 commands to complete [ 195.772071] megasas: [ 5]waiting for 1 commands to complete [ 200.792079] megasas: [10]waiting for 1 commands to complete [ 205.812078] megasas: [15]waiting for 1 commands to complete [ 210.832037] megasas: [20]waiting for 1 commands to complete [ 215.852077] megasas: [25]waiting for 1 commands to complete [ 220.872072] megasas: [30]waiting for 1 commands to complete [ 225.892078] megasas: [35]waiting for 1 commands to complete [ 230.912086] megasas: [40]waiting for 1 commands to complete [ 235.932075] megasas: [45]waiting for 1 commands to complete [ 240.306157] usb 2-1.5: USB disconnect, device number 7 [ 240.952076] megasas: [50]waiting for 1 commands to complete [ 240.960034] INFO: task modprobe:233 blocked for more than 120 seconds. [ 240.960055] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.960067] modprobe D ffffffff81806200 0 233 146 0x00000004 [ 240.960075] ffff880806ae3b48 0000000000000086 ffff880806ae3ae8 ffffffff8101adf3 [ 240.960083] ffff880806ae3fd8 ffff880806ae3fd8 ffff880806ae3fd8 0000000000013780 [ 240.960090] ffffffff81c0d020 ffff880806acae00 ffff880806ae3b58 ffff880808961720 [ 240.960096] Call Trace: [ 240.960107] [<ffffffff8101adf3>] ? native_sched_clock+0x13/0x80 [ 240.960116] [<ffffffff816579cf>] schedule+0x3f/0x60 [ 240.960137] [<ffffffffa00093f5>] megasas_issue_blocked_cmd+0x75/0xb0 [megaraid_sas] [ 240.960144] [<ffffffff8108aa50>] ? add_wait_queue+0x60/0x60 [ 240.960154] [<ffffffffa000a6c9>] megasas_get_seq_num+0xd9/0x260 [megaraid_sas] [ 240.960164] [<ffffffffa000ab31>] megasas_start_aen+0x31/0x60 [megaraid_sas] [ 240.960174] [<ffffffffa00136f1>] megasas_probe_one+0x69a/0x81c [megaraid_sas] [ 240.960182] [<ffffffff813345bc>] local_pci_probe+0x5c/0xd0 [ 240.960189] [<ffffffff81335e89>] __pci_device_probe+0xf9/0x100 [ 240.960197] [<ffffffff8130ce6a>] ? kobject_get+0x1a/0x30 [ 240.960205] [<ffffffff81335eca>] pci_device_probe+0x3a/0x60 [ 240.960212] [<ffffffff813f5278>] really_probe+0x68/0x190 [ 240.960217] [<ffffffff813f5505>] driver_probe_device+0x45/0x70 [ 240.960223] [<ffffffff813f55db>] __driver_attach+0xab/0xb0 [ 240.960227] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960233] [<ffffffff813f5530>] ? driver_probe_device+0x70/0x70 [ 240.960237] [<ffffffff813f436c>] bus_for_each_dev+0x5c/0x90 [ 240.960243] [<ffffffff813f503e>] driver_attach+0x1e/0x20 [ 240.960248] [<ffffffff813f4c90>] bus_add_driver+0x1a0/0x270 [ 240.960255] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960260] [<ffffffff813f5b46>] driver_register+0x76/0x140 [ 240.960266] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960271] [<ffffffff81335b66>] __pci_register_driver+0x56/0xd0 [ 240.960277] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 240.960286] [<ffffffffa001e09e>] megasas_init+0x9e/0x1000 [megaraid_sas] [ 240.960294] [<ffffffff81002040>] do_one_initcall+0x40/0x180 [ 240.960301] [<ffffffff810a82fe>] sys_init_module+0xbe/0x230 [ 240.960307] [<ffffffff81661ec2>] system_call_fastpath+0x16/0x1b [ 240.960314] INFO: task scsi_scan_7:349 blocked for more than 120 seconds.

  Read the article

• Get Exchange Online Mailbox Size in GB

  - by Brian Jackett

  As mentioned in my previous post I was recently working with a customer to get started with Exchange Online PowerShell commandlets.  In this post I wanted to follow up and show one example of a difference in output from commandlets in Exchange 2010 on-premises vs. Exchange Online.   Problem    The customer was interested in getting the size of mailboxes in GB.  For Exchange on-premises this is fairly easy.  A fellow PFE Gary Siepser wrote an article explaining how to accomplish this (click here).  Note that Gary’s script will not work when remoting from a local machine that doesn’t have the Exchange object model installed.  A similar type of scenario exists if you are executing PowerShell against Exchange Online.  The data type for TotalItemSize  being returned (ByteQuantifiedSize) exists in the Exchange namespace.  If the PowerShell session doesn’t have access to that namespace (or hasn’t loaded it) PowerShell works with an approximation of that data type.    The customer found a sample script on this TechNet article that they attempted to use (minor edits by me to fit on page and remove references to deleted item size.)   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation     The script is targeted to Exchange 2010 but fails for Exchange Online.  In Exchange Online when referencing the TotalItemSize property though it does not have a Split method which ultimately causes the script to fail.   Solution    A simple solution would be to add a call to the ToString method off of the TotalItemSize property (in bold on line 5 below).   Get-Mailbox -ResultSize Unlimited | Get-MailboxStatistics | Select DisplayName,StorageLimitStatus, ` @{name="TotalItemSize (MB)"; expression={[math]::Round( ` ($_.TotalItemSize.ToString().Split("(")[1].Split(" ")[0].Replace(",","")/1MB),2)}}, ` ItemCount | Sort "TotalItemSize (MB)" -Descending | Export-CSV "C:\My Documents\All Mailboxes.csv" -NoTypeInformation      This fixes the script to run but the numerous string replacements and splits are an eye sore to me.  I attempted to simplify the string manipulation with a regular expression (more info on regular expressions in PowerShell click here).  The result is a workable script that does one nice feature of adding a new member to the mailbox statistics called TotalItemSizeInBytes.  With this member you can then convert into any byte level (KB, MB, GB, etc.) that suits your needs.  You can download the full version of this script below (includes commands to connect to Exchange Online session). $UserMailboxStats = Get-Mailbox -RecipientTypeDetails UserMailbox ` -ResultSize Unlimited | Get-MailboxStatistics $UserMailboxStats | Add-Member -MemberType ScriptProperty -Name TotalItemSizeInBytes ` -Value {$this.TotalItemSize -replace "(.*\()|,| [a-z]*\)", ""} $UserMailboxStats | Select-Object DisplayName,@{Name="TotalItemSize (GB)"; ` Expression={[math]::Round($_.TotalItemSizeInBytes/1GB,2)}}   Conclusion    Moving from on-premises to the cloud with PowerShell (and PowerShell remoting in general) can sometimes present some new challenges due to what you have access to.  This means that you must always test your code / scripts.  I still believe that not having to physically RDP to a server is a huge gain over some of the small hurdles you may encounter during the transition.  Scripting is the future of administration and makes you more valuable.  Hopefully this script and the concepts presented help you be a better admin / developer.         -Frog Out     Links The Get-MailboxStatistics Cmdlet, the TotalitemSize Property, and that pesky little “b” http://blogs.technet.com/b/gary/archive/2010/02/20/the-get-mailboxstatistics-cmdlet-the-totalitemsize-property-and-that-pesky-little-b.aspx   View Mailbox Sizes and Mailbox Quotas Using Windows PowerShell http://technet.microsoft.com/en-us/exchangelabshelp/gg576861#ViewAllMailboxes   Regular Expressions with Windows PowerShell http://www.regular-expressions.info/powershell.html   “I don’t always test my code…” image http://blogs.pinkelephant.com/images/uploads/conferences/I-dont-always-test-my-code-But-when-I-do-I-do-it-in-production.jpg   The One Thing: Brian Jackett and SharePoint 2010 http://www.youtube.com/watch?v=Sg_h66HMP9o

  Read the article

• Upgrades in 5 Easy Pieces

  - by Anne R.

  Even though there are a few select tasks that I have to do once or twice a year, I can’t remember how to do them! Or where to find the bits and pieces to complete the task. So I love it when someone consolidates everything under one spot. That’s what the CRM On Demand team has done with the upgrade information. Specifically, they have: Provided a “one-stop” area for managing upgrades at your company. Broken down the upgrade process into 5 (yes, 5) steps. Explained when and how to perform each step with dates specific to your pod. Included details about each step, visible by expanding the step. Translated the steps into 11 languages. Added a list of release-specific resources with links from the page. Now, just head for the Training and Support portal, click the Release Info tab, and walk through the “5 Essential Steps to a Successful Upgrade.” Before you continue, though, select your language from the drop-down list on the Release Info page. CRM On Demand now has the upgrade steps translated into 11 languages. On the Step page, you can expand each section in sequence and follow the more detailed instructions that appear. This will ensure that you’ve covered all your bases for each upgrade. Here’s a shortened version of the information that you’ll find: 1. Verify your Primary Contact Information. Have you checked your primary contact information to make sure you’re being notified of all upgrade information? Or do you want more users to receive upgrade announcements? This section provides you with the navigation path to do that in CRM On Demand. 2. Review your Key Upgrade Dates. If you expand this step, a nice table appears with your critical dates for the various milestones. IMPORTANT: When your CRM On Demand pod has been officially added to the upgrade schedule, closer to the release date itself, this table will display your specific timetable. 3. Migrate your Customizations from the Staging Environment before the Snapshot Date. Oracle refreshes the Staging data with a copy of your Production data made on the Production Snapshot Date. So this section lists considerations relevant to this step. It also reminds you of the 2-week period when you should not be making any changes in your Staging environment.   4. Conduct your Upgrade Validation on the Staging Environment. When the Customer Validation Testing period begins, you need to log in to your Staging Environment to validate that your key business processes and customizations continue to behave as expected. If your company utilizes Web Services, Web Links, Web Applets or Workflow, focus on testing these first. You generally have about two weeks for testing. If you run into problems during this time, follow the instructions shown in this section for logging a service request. It describes exactly how to fill out the fields in the SR for the fastest resolution. 5. Conduct "White Glove" Testing in your Upgraded Production Environment. Before users start using the upgrade, you should access a few tabs and reports. Doing this actually warms up the cache so that frequently used pages and reports will come up at normal speed on Monday morning, when users log in to the upgraded system. Resources listed under this step help you in further preparing for the upgrade. Now there’s also a new Documentation section on the right with links to these release-specific resources.   Very nice, I commented, when discussing these improvements with the “responsible party.” She confirmed that, yes, they tried to consolidate the upgrade information, translate it for better communication, simplify it into 5 easy pieces, and drive admins responsible for handling upgrades to this one site instead of sending out elaborate emails. Yes, I just love it when someone practically reaches out and holds my hand through a process. Next best thing to a wizard!

  Read the article

• wifi hardware switch doesn't work on a Dell 1018

  - by user42566

  I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

  Read the article

• I can't shut down nor reboot without console

  - by jgomo3

  After update from 11.04 to 11.10 an wired conduct appears in my machine: Shutdown GUI methods (including reboot) cause only a log off, and in the login screen, shutdown nor reboot options do anything (if you wonder, reboot appears in the shutdown dialog). The only way i can reboot or shutdown is trough console sudo shutdown -h now or sudo reboot. This is OK for me, but not for the rest of the users. How to fix this? Update The syslog output when select shutdown from my desktop is: AptDaemon: INFO: Quitting due to inactivity AptDaemon: INFO: Quitting was requested CRON[5095]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) CRON[5094]: (root) MAIL (mailed 1 byte of output; but got status 0x00ff, #012) kernel: [17027.614974] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.616510] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.618037] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.619557] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.621046] psmouse.c: TouchPad at isa0060/serio4/input0 lost sync at byte 1 kernel: [17027.621051] psmouse.c: issuing reconnect request acpid: client 1032[0:0] has disconnected acpid: client connected from 1032[0:0] acpid: 1 client rule loaded gnome-session[1836]: WARNING: Unable to stop system: Authorization is required acpid: client 1032[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded rtkit-daemon[1313]: Successfully made thread 6134 of process 6134 (n/a) owned by '119' high priority at nice level -11. rtkit-daemon[1313]: Supervising 4 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6139 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 5 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6140 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 6 threads of 2 processes of 2 users. I suspect that the line gnome-session[1836]: WARNING: Unable to stop system: Authorization is required is related to the issue. When selecting shutdown from the login screen, the output is the same from the line pointed. This is the output: gnome-session[1836]: WARNING: Unable to stop system: Authorization is required acpid: client 1032[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded rtkit-daemon[1313]: Successfully made thread 6134 of process 6134 (n/a) owned by '119' high priority at nice level -11. rtkit-daemon[1313]: Supervising 4 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6139 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 5 threads of 2 processes of 2 users. rtkit-daemon[1313]: Successfully made thread 6140 of process 6134 (n/a) owned by '119' RT at priority 5. rtkit-daemon[1313]: Supervising 6 threads of 2 processes of 2 users. acpid: client 6055[0:0] has disconnected acpid: client connected from 6055[0:0] acpid: 1 client rule loaded

  Read the article

• How does the Trash Can work, and where can I find official documentation, reference, or specification for it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always uses <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, it's annoying: if I have 15 users, I end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why does it never use it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash; it gives an error. Try to delete any file, it says "it can't move to trash". Ok, I know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why the error then? Bug? Why must I change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from the standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find a technical reference for Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what I am doing wrong, especially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for the sticky bit (VFAT, NTFS), it probably doesn't have for permissions either (at least VFAT surely doesn't). So what prevents one user from purging / restoring other users' ./Trash-xxx ? If one can read/write his own Trash, one can do the same for the whole drive, including other's trashes, correct? Or does Gnome have some kind of "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permissions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really prefer to use /.Trash/xxx format... For the root issue: for the / partition, I can use trash as root, and it goes to /root/.local/shate/Trash. But if I click on Nautilus "Trash" (as root), I get an error. Don't you? So files are correctly trashed, but I can't access it. All I can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc.). For non-/ partitions (or at least for VFAT/NTFS), I can not even use trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permanently delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really clutter the desktop and/or Nautilus. I'd rather have it pre-mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives. So, if Ubuntu/Gnome truly follows the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• Using the latest (stable release) of Oracle Developer Tools for Visual Studio 11.1.0.7.20.

  - by mbcrump

  +  = Simple and safe Data connections.   This guide is for someone wanting to use the latest ODP.NET quickly without reading the official documentation. This guide will get you up and running in about 15 minutes. I have reviewed my referral link to my simple Setting up ODP.net with Win7 x64 and noticed most people were searching for one of the following terms: “how to use odp.net with vs” “setup connection odp.net” “query db using odp and vs” While my article provided links and a sample tnsnames.ora file, it really didn’t tell you how to use it. I’m hoping that this brief tutorial will help. So before we get started, you will need the following: Download the following: www.oracle.com/technology/software/tech/dotnet/utilsoft.html from oracle and install it. It is the first one on the page. Visual Studio 2008 or 2010. It should be noted that The System.Data.OracleClient namespace is the OLD .NET Framework Data Provider for Oracle. It should not be used anymore as it has been depreciated. The latest version which is what we are using is Oracle.DataAccess.Client. First things first, Add a reference to the Oracle.DataAccess.Client after you install ODP.NET   Copy and paste the following C# code into your project and replace the relevant info including the query string and you should be able to return data. I have commented several lines of code to assist in understanding what it is doing.   Lambda Expression. using System; using System.Data; using Oracle.DataAccess.Client;   namespace ConsoleApplication1 {     class Program     {         static void Main(string[] args)         {           try         {             //Setup DataSource             string oradb = "Data Source=(DESCRIPTION ="                                    + "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))"                                    + "(CONNECT_DATA = (SERVICE_NAME = SERVICENAME))) ;"                                    + "Persist Security Info=True;User ID=USER;Password=PASSWORD;";                        //Open Connection to Oracle - this could be moved outside the try.             OracleConnection conn = new OracleConnection(oradb);             conn.Open();               //Create cmd and use parameters to prevent SQL injection attacks.             OracleCommand cmd = new OracleCommand();             cmd.Connection = conn;               cmd.CommandText = "select username from table where username = :username";               OracleParameter p1 = new OracleParameter("username", OracleDbType.Varchar2);             p1.Value = username;             cmd.Parameters.Add(p1);               cmd.CommandType = CommandType.Text;               OracleDataReader dr = cmd.ExecuteReader();             dr.Read();               //Contains the value of the datarow             Console.WriteLine(dr["username"].ToString());               //Disposes of objects.             dr.Dispose();             cmd.Dispose();             conn.Dispose();         }           catch (OracleException ex) // Catches only Oracle errors         {             switch (ex.Number)             {                 case 1:                     Console.WriteLine("Error attempting to insert duplicate data.");                     break;                 case 12545:                     Console.WriteLine("The database is unavailable.");                     break;                 default:                     Console.WriteLine(ex.Message.ToString());                     break;             }         }           catch (Exception ex) // Catches any error not previously caught         {                   Console.WriteLine("Unidentified Error: " + ex.Message.ToString());              }         }       }           } At this point, you should have a working Program that returns data from an oracle database. If you are still having trouble then drop me a line and I will be happy to assist. As of this writing, oracle has announced the latest beta release of ODP.NET 11.2.0.1.1 Beta.  This release includes .NET Framework 4 and .NET Framework 4 Client Profile support. You may want to hold off on this version for a while as its BETA, and I wouldn’t want any production code using any BETA software.

  Read the article

• Prefilling an SMS on Mobile Devices with the sms: Uri Scheme

  - by Rick Strahl

  Popping up the native SMS app from a mobile HTML Web page is a nice feature that allows you to pre-fill info into a text for sending by a user of your mobile site. The syntax is a bit tricky due to some device inconsistencies (and quite a bit of wrong/incomplete info on the Web), but it's definitely something that's fairly easy to do.In one of my Mobile HTML Web apps I need to share a current location via SMS. While browsing around a page I want to select a geo location, then share it by texting it to somebody. Basically I want to pre-fill an SMS message with some text, but no name or number, which instead will be filled in by the user.What worksThe syntax that seems to work fairly consistently except for iOS is this:sms:phonenumber?body=messageFor iOS instead of the ? use a ';' (because Apple is always right, standards be damned, right?):sms:phonenumber;body=messageand that works to pop up a new SMS message on the mobile device. I've only marginally tested this with a few devices: an iPhone running iOS 6, an iPad running iOS 7, Windows Phone 8 and a Nexus S in the Android Emulator. All four devices managed to pop up the SMS with the data prefilled.You can use this in a link:<a href="sms:1-111-1111;body=I made it!">Send location via SMS</a>or you can set it on the window.location in JavaScript:window.location ="sms:1-111-1111;body=" + encodeURIComponent("I made it!");to make the window pop up directly from code. Notice that the content should be URL encoded - HTML links automatically encode, but when you assign the URL directly in code the text value should be encoded.Body onlyI suspect in most applications you won't know who to text, so you only want to fill the text body, not the number. That works as you'd expect by just leaving out the number - here's what the URLs look like in that case:sms:?body=messageFor iOS same thing except with the ;sms:;body=messageHere's an example of the code I use to set up the SMS:var ua = navigator.userAgent.toLowerCase(); var url; if (ua.indexOf("iphone") > -1 || ua.indexOf("ipad") > -1) url = "sms:;body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); else url = "sms:?body=" + encodeURIComponent("I'm at " + mapUrl + " @ " + pos.Address); location.href = url;and that also works for all the devices mentioned above.It's pretty cool that URL schemes exist to access device functionality and the SMS one will come in pretty handy for a number of things. Now if only all of the URI schemes were a bit more consistent (damn you Apple!) across devices...© Rick Strahl, West Wind Technologies, 2005-2013Posted in IOS  JavaScript  HTML5   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• NetBeans Java Hints: Quick & Dirty Guide

  - by Geertjan

  In NetBeans IDE 7.2, a new wizard will be found in the "Module Development" category in the New File dialog, for creating new Java Hints. Select a package in a NetBeans module project. Right click, choose New/Other.../Module Development/Java Hint: You'll then see this: Fill in: Class Name: the name of the class that should be generated. E.g. "Example". Hint Display Name: the display name of the hint itself (as will appear in Tools/Options). E.g. "Example Hint". Warning Message: the warning that should be produced by the hint. E.g. "Something wrong is going on". Hint Description: a longer description of the hint, will appear in Tools/Options and eventually some other places. E.g. "This is an example hint that warns about an example problem." Will also provide an Automatic Fix: whether the hint will provide some kind of transformation. E.g. "yes". Fix Display Name: the display name of such a fix/transformation. E.g. "Fix the problem". Click Finish. Should generate "Example.java", the hint itself: import com.sun.source.util.TreePath; import org.netbeans.api.java.source.CompilationInfo; import org.netbeans.spi.editor.hints.ErrorDescription; import org.netbeans.spi.editor.hints.Fix; import org.netbeans.spi.java.hints.ConstraintVariableType; import org.netbeans.spi.java.hints.ErrorDescriptionFactory; import org.netbeans.spi.java.hints.Hint; import org.netbeans.spi.java.hints.HintContext; import org.netbeans.spi.java.hints.JavaFix; import org.netbeans.spi.java.hints.TriggerPattern; import org.openide.util.NbBundle.Messages; @Hint(displayName = "DN_com.bla.Example", description = "DESC_com.bla.Example", category = "general") //NOI18N @Messages({"DN_com.bla.Example=Example Hint", "DESC_com.bla.Example=This is an example hint that warns about an example problem."}) public class Example { @TriggerPattern(value = "$str.equals(\"\")", //Specify a pattern as needed constraints = @ConstraintVariableType(variable = "$str", type = "java.lang.String")) @Messages("ERR_com.bla.Example=Something wrong is going on") public static ErrorDescription computeWarning(HintContext ctx) { Fix fix = new FixImpl(ctx.getInfo(), ctx.getPath()).toEditorFix(); return ErrorDescriptionFactory.forName(ctx, ctx.getPath(), Bundle.ERR_com.bla_Example(), fix); } private static final class FixImpl extends JavaFix { public FixImpl(CompilationInfo info, TreePath tp) { super(info, tp); } @Override @Messages("FIX_com.bla.Example=Fix the problem") protected String getText() { return Bundle.FIX_com_bla_Example(); } @Override protected void performRewrite(TransformationContext ctx) { //perform the required transformation } } } Should also generate "ExampleTest.java", a test for it. Unfortunately, the wizard infrastructure is not capable of handling changes related to test dependencies. So the ExampleTest.java has a todo list at its begining: /* TODO to make this test work:  - add test dependency on Java Hints Test API (and JUnit 4)  - to ensure that the newest Java language features supported by the IDE are available,   regardless of which JDK you build the module with:  -- for Ant-based modules, add "requires.nb.javac=true" into nbproject/project.properties  -- for Maven-based modules, use dependency:copy in validate phase to create   target/endorsed/org-netbeans-libs-javacapi-*.jar and add to endorseddirs   in maven-compiler-plugin configuration  */Warning: if this is a project for which tests never existed before, you may need to close&reopen the project, so that "Unit Test Libraries" node appears - a bug in apisupport projects, as far as I can tell.  Thanks to Jan Lahoda for the above rough guide.

  Read the article

• How does Trash Can works? Where can i find official specification / documentation / reference about it?

  - by MestreLion

  When trying to manage trash can from mounted NTFS volumes, I ended up reading FreeDesktop.org's reference on it. Poking around and doing some tests, I realized Ubuntu/Gnome does not follow the specs 100%. Here's why: For non-/ partitions, it always use <driveroot>/.Trash-<uid>, It never used <driveroot>/.Trash/<uid>, even when i created it in advance. While this works, its annoying: if i have 15 users, i end up with 15 /.Trash-xxx folders in my drive, while the other approach would still give a single folder (with 15 sub-folders). That "pollution" in my drives is very unpleasant. And specs say "If an $topdir/.Trash directory is absent, an $topdir/.Trash-$uid directory is to be used". Well, it IS present, so why it never uses it? root trash does not work, at least not out of the box. Open nautilus as root and click on trash, it gives error. Try to delete any file, it says "it cant move to trash". Ok, i know this can be fixed by creating /root/.local/share. But specs says "A “home trash” directory SHOULD be automatically created for any new user. If this directory is needed for a trashing operation but does not exist, the implementation SHOULD automatically create it, without any warnings or delays.". Why error then? Bug? Why do i must change /etc/fstab entries for mounted volumes, adding options like uid and guid, if the volumes are already mounted as RW for everyone? These are just some examples of deviation from standard. So, the question is: "If Ubuntu does not adhere 100% to the spec, HOW exactly does the trash work? WHERE can i find technical reference about Ubuntu's implementation of the trash?" By the way: if Ubuntu does happen to follow specs, please tell me what am i doing wrong, specially regarding the /.Trash-<uid> vs /.Trash/<uid> issue. Thanks! EDIT: Some more info: If a given fs has no support for sticky bit (VFAT, NTFS), it probably dont have for permitions either (at least VFAT surely doesnt). So what prevents one user for purging / restoring other users ./Trash-xxx ? If one can read/write his own Trash, he can also do the same for the whole drive, including other's trashes, isnt it? Or does Gnome has any "extra" protection on ./Trash-xxx folders on VFAT/NTFS fs? If Linux can "emulate" file permitions on NTFS mounting by editing /fstab uid and gid options, can it also "emulate" the sticky bit? I would really want to use /.Trash/xxx format... For the root issue: for the / partition, i can trash as root, and it goes to /root/.local/shate/Trash. But if i click on Nautilus "Trash" (as root), i get an error. Dont you? So files are correctly trashed, but i cant access it. All i can do is manually "purge" them (by deleting files on /root/.local/shate/Trash), but restoring would be very tricky (opening info files and manually moving, etc) For non-/ partitions (or at least for VFAT/NTFS), I can not even trash as root: it does not create a ./Trash-0 folder, it simply says "Cannot trash, want to permantly delete?" Why? About fstab: i use it for a permanent mount for my NTFS partitions. I have several, and if not "pre-mounted" they really cluttter desktop and/or Nautilus. Id rather have it pre mounted, integrated in my fs, in mounts like /data , /windows/xp , /windows/vista , and so on, and leave /media and its "mount/unmount" flexibility just for truly removable drives Si, if Ubuntu/Gnome truly follow the spec, is there any way to fix the root issues and to "emulate" the sticky bit for (at least) my fstab'ed NTFS fixed partitions?

  Read the article

• How to Open Any Folder as a Project in the NetBeans Platform

  - by Geertjan

  Typically, as described in the NetBeans Project Type Tutorial, you'll define a project type based on the presence of a file (e.g., "project.xml" or "customer.txt" or something like that) in a folder. I.e., if the file is there, then its parent, i.e., the folder that contains the file, is a project and should be opened in your application. However, in some scenarios (as with the HTML5 project type introduced in NetBeans IDE 7.3), the user should be able to open absolutely any folder at all into the application. How to create a project type that is that liberal? Here you go, the only condition that needs to be true is that the selected item in the "Open Project" dialog is a folder, as defined in the "isProject" method below. Nothing else. That's it. If you select a folder, it will be opened in your application, displaying absolutely everything as-is (since below there's no ProjectLogicalView defined): import java.beans.PropertyChangeListener; import java.io.IOException; import javax.swing.Icon; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectInformation; import org.netbeans.spi.project.ProjectFactory; import org.netbeans.spi.project.ProjectState; import org.openide.filesystems.FileObject; import org.openide.loaders.DataFolder; import org.openide.loaders.DataObjectNotFoundException; import org.openide.nodes.FilterNode; import org.openide.util.Exceptions; import org.openide.util.ImageUtilities; import org.openide.util.Lookup; import org.openide.util.lookup.Lookups; import org.openide.util.lookup.ServiceProvider; @ServiceProvider(service = ProjectFactory.class) public class FolderProjectFactory implements ProjectFactory { @Override public boolean isProject(FileObject projectDirectory) { return DataFolder.findFolder(projectDirectory) != null; } @Override public Project loadProject(FileObject dir, ProjectState state) throws IOException { return isProject(dir) ? new FolderProject(dir) : null; } @Override public void saveProject(Project prjct) throws IOException, ClassCastException { // leave unimplemented for the moment } private class FolderProject implements Project { private final FileObject projectDir; private Lookup lkp; private FolderProject(FileObject dir) { this.projectDir = dir; } @Override public FileObject getProjectDirectory() { return projectDir; } @Override public Lookup getLookup() { if (lkp == null) { lkp = Lookups.fixed(new Object[]{ new Info(), }); } return lkp; } private final class Info implements ProjectInformation { @Override public Icon getIcon() { Icon icon = null; try { icon = ImageUtilities.image2Icon( new FilterNode(DataFolder.find( getProjectDirectory()).getNodeDelegate()).getIcon(1)); } catch (DataObjectNotFoundException ex) { Exceptions.printStackTrace(ex); } return icon; } @Override public String getName() { return getProjectDirectory().getName(); } @Override public String getDisplayName() { return getName(); } @Override public void addPropertyChangeListener(PropertyChangeListener pcl) { //do nothing, won't change } @Override public void removePropertyChangeListener(PropertyChangeListener pcl) { //do nothing, won't change } @Override public Project getProject() { return FolderProject.this; } } } } Even the ProjectInformation implementation really isn't needed at all, since it provides nothing more than the icon in the "Open Project" dialog, the rest (i.e., the display name in the "Open Project" dialog) is provided by default regardless of whether you have a ProjectInformation implementation or not.

  Read the article

• Running a WebLogic Portal (WLP) 10.3.4 Domain as a Windows Service

  - by user647124

  To start a WLP server as a Windows service it is simplest to make your own script based on the provided standard script located at WL_HOME\server\bin\installSvc.cmd. The standard script works fine for a plain WLS domain, but lacks some classpath and options necessary for WLP.Start by making a copy of the installSvc.cmd script and naming it something specific to your domain.Next, just under SETLOCAL you will find where WL_HOME is defined. Here you will add the definitions you would normally add in a script that later calls installSvc.cmd (as per the standard documentation). set DOMAIN_NAME=gnma_test_domainset USERDOMAIN_HOME=D:\my_test_domainset SERVER_NAME=AdminServerset WLS_USER=weblogicset WLS_PW=gnmaAdmin01set PRODUCTION_MODE=trueset MEM_ARGS=-Xms512m –Xmx512mset MW_HOME=C:\Oracle\Middleware Note: I had heard of people using this approach who had issues with the length of the command line. This may be due to their use of the default domain path. In the example above, I use a shorter path.At this point, edit the DOMAIN_HOME\bin\startWebLogic.cmd and set it to echo both the classpath and the options. Then start the domain and capture the output of those echoes, then shut the domain back down. Now REM out the existing CLASSPATH definition, then use the outputs you captured earlier to set the CLASSPATH and JAVA_OPTIONS like this: REM set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%; C:\Oracle\Middleware\wlportal_10.3\portal\lib\security\wsrp-security-providers.jarset CLASSPATH=%MW_HOME%\patch_wls1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_wlp1034\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_oepe1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\patch_ocm1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar;%MW_HOME%\JROCKI~1.1-3\lib\tools.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%MW_HOME%\modules\features\weblogic.server.modules_10.3.4.0.jar;%WL_HOME%\server\lib\webservices.jar;%MW_HOME%\modules\ORGAPA~1.1/lib/ant-all.jar;%MW_HOME%\modules\NETSFA~1.0_1/lib/ant-contrib.jar;%WL_HOME%\common\derby\lib\derbyclient.jar;%WL_HOME%\server\lib\xqrl.jar;%WL_HOME%\server\lib\xquery.jar;%WL_HOME%\server\lib\binxml.jarset JAVA_OPTIONS= -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=%WL_HOME% -Dwls.home=%WL_HOME%\server -Dweblogic.home=%WL_HOME%\server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=true -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=%MW_HOME%\patch_wls1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_wlp1034\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_oepe1111\profiles\default\sysext_manifest_classpath;%MW_HOME%\patch_ocm1033\profiles\default\sysext_manifest_classpath;%MW_HOME%\wlportal_10.3\p13n\lib\system;%MW_HOME%\wlportal_10.3\light-portal\lib\system;%MW_HOME%\wlportal_10.3\portal\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\lib\system;%MW_HOME%\wlportal_10.3\analytics\lib\system;%MW_HOME%\wlportal_10.3\apps\lib\system;%MW_HOME%\wlportal_10.3\info-mgmt\deprecated\lib\system;%MW_HOME%\wlportal_10.3\content-mgmt\lib\system -Dweblogic.alternateTypesDirectory=%MW_HOME%\wlportal_10.3\portal\lib\securityAnd that's it. Looks really simple, but it took me quite some time to gather all the necessary pieces in order to make it work. Hopefully you find this before you went through half as much research.The example here uses a domain with only the Admin server and no managed servers. For a variety of reasons I only want the Admin server to be run as a service. The standard documentation along with the example above should allow you to expand this to include managed servers should you feel the need.

  Read the article

• Hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  Read the article

• What is the difference between Workcenters, Dashboards, and the Interaction Hub?

  - by Matthew Haavisto

  Oracle Open World has just concluded.  Over the course of the conference, we presented several sessions covering different aspects of the PeopleSoft user experience, including Workcenters, Dashboards, and the PeopleSoft Interaction Hub (formerly known as the PeopleSoft Applications Portal).  Although we've produced collateral on these features and covered them in sessions, it became apparent at the conference that customers still have many questions about the these products, including how they are licensed, how they are installed, what their various purposes are, and how they can be used together synergistically. Let's Start with Licensing and Installation As you may know, we've extended the restricted use license (RUL) for the Interaction Hub.  This grants customers with PeopleTools 8.52 licenses the right to install the Interaction Hub for free for use as specified in the Tools license notes.  Note that this means customers receive a restricted use license for the Interaction Hub that doesn't cost them an additional license fee, but it is a separate product, not part of PeopleTools or PeopleSoft applications, and is a separate installation.  This means customers must provide the infrastructure to install and run the Hub, just like any other application.  The benefits of using the Hub to unify your PeopleSoft user experience can be great.  PeopleSoft applications have not yet delivered instances of the Hub with their products, though they may in the future. Workcenters and Dashboards, on the other hand, are frameworks provided by PeopleTools.  No other license is required, and no additional installation of a separate product is needed (apart from PeopleTools and PeopleSoft applications).  PeopleSoft applications are delivering instances of the workcenters and dashboards with their products.  Some are available now, and more are coming in future releases.  These delivered workcenter and dashboard instances require no additional licenses, and no additional installations beyond Tools and the applications that provide them.  In addition, the workcenter and dashboard frameworks provided by PeopleTools can be used by customers to build their own workcenters and dashboards, and it's quite easy and simple to do so. What are Their Differences?  What Purposes do they Serve? Workcenters, Dashboards and the Interaction Hub appear somewhat similar.  They all contain pagelets, and have some visual characteristics in common.  However, their strengths and purposes are very different, and they were designed to provide different benefits to your PeopleSoft ecosystem. Workcenters and Dashboards have the following characteristics: Designed for specific roles Focus on the daily tasks of those roles Help to streamline the work performed most often Personal view of my work world Makes navigation and search easier and quicker, particularly for transactions and decision support Reports and data needed for day-to-day work Personalizable, but minimal Delivered by PS Apps, but can be altered by customer for their requirements Customers can create their own Workcenters can be used for guided processes  The Interaction Hub is designed to aggregate content from multiple applications, and is is used to unify the user experience of those applications.  It offers a rich, web site-based user experience, and is often used to provide access to infrequently performed activities like benefits enrollment, payroll inquiries, life event changes, onboarding, and so on. Full-featured and robust Centrally administered Pushed to large audience Broad info like Company News Infrequent activities like benefits, not day-to-day tasks Self-service, access to employer info Central launch point for other activities and can navigate to workcenters and dashboards Deployed by customers or consultants, instances not delivered by PeopleSoft (at this time) Content management Unified PS application navigation Although these products are quite different and serve different purposes in your PeopleSoft environment, they can be used together to provide a richer, more efficient and engaging user experience for your all your user communities.

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• Wireless doesn't work on a Broadcom BCM4312

  - by Boderick

  As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• How to make Ubuntu recognize an unknown external display (so I can adjust its resolution)?

  - by WagnerAA

  I have a Dell laptop with an external monitor attached (a Samsumg SyncMaster 931c). My laptop display was recognized, and I can adjust its optimum resolution. My external display is still unknown, thus I'm stuck at a lower resolution (1024x768): I tried the "Detect Displays" button, but it didn't work, nothing happens. I recently upgraded from Ubuntu 12.04 to 12.10. Things were working before. I don't know if I can actually change this configuration, or if this is a bug. I searched for an answer here and also in Launchpad's website, but found none. I even tried to install Nvidia drivers, and just messed things up. It seems I wasn't even using nvidia before, as I guessed by looking at my additional drivers configuration: My laptop has an Intel chipset, I guess: $ dpkg --get-selections | grep -i -e nvidia -e intel intel-gpu-tools install libdrm-intel1:amd64 install libdrm-intel1:i386 install nvidia-common install xserver-xorg-video-intel install I don't have an xorg.conf file (I think this is nvidia related, am I right?): $ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory $ ls -l /etc/X11/ total 76 drwxr-xr-x 2 root root 4096 Out 19 23:41 app-defaults drwxr-xr-x 2 root root 4096 Abr 25 2012 cursors -rw-r--r-- 1 root root 18 Abr 25 2012 default-display-manager drwxr-xr-x 4 root root 4096 Abr 25 2012 fonts -rw-r--r-- 1 root root 17394 Dez 3 2009 rgb.txt lrwxrwxrwx 1 root root 13 Mai 1 03:33 X -> /usr/bin/Xorg drwxr-xr-x 3 root root 4096 Out 19 23:41 xinit drwxr-xr-x 2 root root 4096 Jan 23 2012 xkb -rw-r--r-- 1 root root 0 Out 24 08:55 xorg.conf.nvidia-xconfig-original -rwxr-xr-x 1 root root 709 Abr 1 2010 Xreset drwxr-xr-x 2 root root 4096 Out 19 10:08 Xreset.d drwxr-xr-x 2 root root 4096 Out 19 10:08 Xresources -rwxr-xr-x 1 root root 3730 Jan 20 2012 Xsession drwxr-xr-x 2 root root 4096 Out 20 00:11 Xsession.d -rw-r--r-- 1 root root 265 Jul 1 2008 Xsession.options -rw-r--r-- 1 root root 13 Ago 15 06:43 XvMCConfig -rw-r--r-- 1 root root 601 Abr 25 2012 Xwrapper.config Here is some information I gathered by looking at other related posts: $ sudo lshw -C display; lsb_release -a; uname -a *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:48 memory:f6800000-f6bfffff memory:d0000000-dfffffff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6100000-f61fffff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:qt4-3.1-amd64:qt4-3.1-noarch Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux Batcave 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ xrandr -q Screen 0: minimum 320 x 200, current 2304 x 800, maximum 32767 x 32767 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 1790mm 1280x800 59.9*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+1280+32 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) If there's anything else I can do, any other information I can post here, to help me configure this external display, please let me know. If this is actually a bug, I apologize (I know bugs are not allowed here), but I really wasn't sure. And I will promptly file a bug report in Launchpad if that's the case. Thanks a lot in advance. ;)

  Read the article

• Rotating WebLogic Server logs to avoid large files using WLST.

  - by adejuanc

  By default, when WebLogic Server instances are started in development mode, the server automatically renames (rotates) its local server log file as SERVER_NAME.log.n.  For the remainder of the server session, log messages accumulate in SERVER_NAME.log until the file grows to a size of 500 kilobytes.Each time the server log file reaches this size, the server renames the log file and creates a new SERVER_NAME.log to store new messages. By default, the rotated log files are numbered in order of creation filenamennnnn, where filename is the name configured for the log file. You can configure a server instance to include a time and date stamp in the file name of rotated log files; for example, server-name-%yyyy%-%mm%-%dd%-%hh%-%mm%.log.By default, when server instances are started in production mode, the server rotates its server log file whenever the file grows to 5000 kilobytes in size. It does not rotate the local server log file when the server is started. For more information about changing the mode in which a server starts, see Change to production mode in the Administration Console Online Help.You can change these default settings for log file rotation. For example, you can change the file size at which the server rotates the log file or you can configure a server to rotate log files based on a time interval. You can also specify the maximum number of rotated files that can accumulate. After the number of log files reaches this number, subsequent file rotations delete the oldest log file and create a new log file with the latest suffix.  Note: WebLogic Server sets a threshold size limit of 500 MB before it forces a hard rotation to prevent excessive log file growth. To Rotate via WLST : #invoke WLSTC:\>java weblogic.WLST#connect WLST to an Administration Serverawls:/offline> connect('username','password')#navigate to the ServerRuntime MBean hierarchywls:/mydomain/serverConfig> serverRuntime()wls:/mydomain/serverRuntime>ls()#navigate to the server LogRuntimeMBeanwls:/mydomain/serverRuntime> cd('LogRuntime/myserver')wls:/mydomain/serverRuntime/LogRuntime/myserver> ls()-r-- Name myserver-r-- Type LogRuntime-r-x forceLogRotation java.lang.Void :#force the immediate rotation of the server log filewls:/mydomain/serverRuntime/LogRuntime/myserver> cmo.forceLogRotation()wls:/mydomain/serverRuntime/LogRuntime/myserver> The server immediately rotates the file and prints the following message: <Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170017> <The log file C:\diablodomain\servers\myserver\logs\myserver.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.><Mar 2, 2012 3:23:01 PM EST> <Info> <Log Management> <BEA-170018> <The log file has been rotated to C:\diablodomain\servers\myserver\logs\myserver.log00001. Log messages will continue to be logged in C:\diablodomain\servers\myserver\logs\myserver.log.> To specify the Location of the archived Log Files The following command specifies the directory location for the archived log files using the -Dweblogic.log.LogFileRotationDir Java startup option: java -Dweblogic.log.LogFileRotationDir=c:\foo-Dweblogic.management.username=installadministrator-Dweblogic.management.password=installadministrator weblogic.Server For more information read the following documentation ; Using the WebLogic Scripting Tool http://download.oracle.com/docs/cd/E13222_01/wls/docs103/config_scripting/using_WLST.html Configuring WebLogic Logging Services http://download.oracle.com/docs/cd/E12840_01/wls/docs103/logging/config_logs.html

  Read the article

• trying to setup wireless

  - by JohnMerlino

  I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• Working with Analytic Workflow Manager (AWM) - Part 8 Cube Metadata Analysis

  - by Mohan Ramanuja

  CUBE SIZEselect dbal.owner||'.'||substr(dbal.table_name,4) awname, sum(dbas.bytes)/1024/1024 as mb, dbas.tablespace_name from dba_lobs dbal, dba_segments dbas where dbal.column_name = 'AWLOB' and dbal.segment_name = dbas.segment_name group by dbal.owner, dbal.table_name, dbas.tablespace_name order by dbal.owner, dbal.table_name SESSION RESOURCES select vses.username||':'||vsst.sid username, vstt.name, max(vsst.value) valuefrom v$sesstat vsst, v$statname vstt, v$session vseswhere vstt.statistic# = vsst.statistic# and vsst.sid = vses.sid andVSES.USERNAME LIKE ('ATTRIBDW_OWN') ANDvstt.name in ('session pga memory', 'session pga memory max', 'session uga memory','session uga memory max', 'session cursor cache count', 'session cursor cache hits', 'session stored procedure space', 'opened cursors current', 'opened cursors cumulative') andvses.username is not null group by vsst.sid, vses.username, vstt.name order by vsst.sid, vses.username, vstt.name OLAP PGA USE select 'OLAP Pages Occupying: '|| round((((select sum(nvl(pool_size,1)) from v$aw_calc)) / (select value from v$pgastat where name = 'total PGA inuse')),2)*100||'%' info from dual union select 'Total PGA Inuse Size: '||value/1024||' KB' info from v$pgastat where name = 'total PGA inuse' union select 'Total OLAP Page Size: '|| round(sum(nvl(pool_size,1))/1024,0)||' KB' info from v$aw_calc order by info desc OLAP PGA USAGE PER USER select vs.username, vs.sid, round(pga_used_mem/1024/1024,2)||' MB' pga_used, round(pga_max_mem/1024/1024,2)||' MB' pga_max, round(pool_size/1024/1024,2)||' MB' olap_pp, round(100*(pool_hits-pool_misses)/pool_hits,2) || '%' olap_ratio from v$process vp, v$session vs, v$aw_calc va where session_id=vs.sid and addr = paddr CUBE LOADING SCRIPT REM The 'set define off' statement is needed only if running this script through SQLPlus.REM If you are using another tool to run this script, the line below may be commented out.set define offBEGIN  DBMS_CUBE.BUILD(    'VALIDATE  ATTRIBDW_OWN.CURRENCY USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNT USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.DATEDIM USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.CUSIP USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNTRETURN',    'CCCCC', -- refresh methodfalse, -- refresh after errors    0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/BEGIN  DBMS_CUBE.BUILD(    '  ATTRIBDW_OWN.CURRENCY USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNT USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.DATEDIM USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.CUSIP USING  (    LOAD NO SYNCH,    COMPILE SORT  ),  ATTRIBDW_OWN.ACCOUNTRETURN',    'CCCCC', -- refresh methodfalse, -- refresh after errors    0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/ VISUALIZATION OBJECT - AW$ATTRIBDW_OWN  CREATE TABLE "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"        (            "PS#"    NUMBER(10,0),            "GEN#"   NUMBER(10,0),            "EXTNUM" NUMBER(8,0),            "AWLOB" BLOB,            "OBJNAME"  VARCHAR2(256 BYTE),            "PARTNAME" VARCHAR2(256 BYTE)        )        PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE        (            BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "AWLOB"        )        STORE AS SECUREFILE        (            TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        )        PARTITION BY RANGE        (            "GEN#"        )        SUBPARTITION BY HASH        (            "PS#",            "EXTNUM"        )        SUBPARTITIONS 8        (            PARTITION "PTN1" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE READS LOGGING NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP661" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP662" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP663" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP664" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP665" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION            "SYS_SUBP666" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP667" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP668" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) ,            PARTITION "PTNN" VALUES LESS THAN (MAXVALUE) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP669" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP670" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP671" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP672" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP673" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION            "SYS_SUBP674" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP675" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP676" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" )        ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."ATTRIBDW_OWN_I$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"    (        "PS#", "GEN#", "EXTNUM"    )    PCTFREE 10 INITRANS 4 MAXTRANS 255 COMPUTE STATISTICS STORAGE    (        INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT    )    TABLESPACE "ATTRIBDW_DATA" ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000406980C00004$$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN"    (        PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOCAL (PARTITION "SYS_IL_P711" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP695" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP696" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP697" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP698" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP699" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP700" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP701" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP702" TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "SYS_IL_P712" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP703" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP704" TABLESPACE        "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP705" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP706" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP707" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP708" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP709" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP710" TABLESPACE "ATTRIBDW_DATA" ) ) PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE BUILD LOG  CREATE TABLE "ATTRIBDW_OWN"."CUBE_BUILD_LOG"        (            "BUILD_ID"          NUMBER,            "SLAVE_NUMBER"      NUMBER,            "STATUS"            VARCHAR2(10 BYTE),            "COMMAND"           VARCHAR2(25 BYTE),            "BUILD_OBJECT"      VARCHAR2(30 BYTE),            "BUILD_OBJECT_TYPE" VARCHAR2(10 BYTE),            "OUTPUT" CLOB,            "AW"            VARCHAR2(30 BYTE),            "OWNER"         VARCHAR2(30 BYTE),            "PARTITION"     VARCHAR2(50 BYTE),            "SCHEDULER_JOB" VARCHAR2(100 BYTE),            "TIME" TIMESTAMP (6)WITH TIME ZONE,        "BUILD_SCRIPT" CLOB,        "BUILD_TYPE"            VARCHAR2(22 BYTE),        "COMMAND_DEPTH"         NUMBER(2,0),        "BUILD_SUB_OBJECT"      VARCHAR2(30 BYTE),        "REFRESH_METHOD"        VARCHAR2(1 BYTE),        "SEQ_NUMBER"            NUMBER,        "COMMAND_NUMBER"        NUMBER,        "IN_BRANCH"             NUMBER(1,0),        "COMMAND_STATUS_NUMBER" NUMBER,        "BUILD_NAME"            VARCHAR2(100 BYTE)        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "OUTPUT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        )        LOB        (            "BUILD_SCRIPT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00013$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00007$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE DIMENSION COMPILE  CREATE TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"        (            "ID"               NUMBER,            "SEQ_NUMBER"       NUMBER,            "ERROR#"           NUMBER(8,0) NOT NULL ENABLE,            "ERROR_MESSAGE"    VARCHAR2(2000 BYTE),            "DIMENSION"        VARCHAR2(100 BYTE),            "DIMENSION_MEMBER" VARCHAR2(100 BYTE),            "MEMBER_ANCESTOR"  VARCHAR2(100 BYTE),            "HIERARCHY1"       VARCHAR2(100 BYTE),            "HIERARCHY2"       VARCHAR2(100 BYTE),            "ERROR_CONTEXT" CLOB        )        SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING TABLESPACE "ATTRIBDW_DATA" LOB        (            "ERROR_CONTEXT"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR#"IS    'Error number being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_MESSAGE"IS    'Error text being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION"IS    'Name of dimension being compiled';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION_MEMBER"IS    'Problem dimension member';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."MEMBER_ANCESTOR"IS    'Problem dimension member''s parent';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY1"IS    'First hierarchy involved in error';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY2"IS    'Second hierarchy involved in error';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_CONTEXT"IS    'Extra information for error';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"IS    'Cube dimension compile log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407307C00010$$" ON "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE( INITIAL 1048576 NEXT 1048576 MAXEXTENTS 2147483645) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE OPERATING LOG  CREATE TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"        (            "INST_ID"    NUMBER NOT NULL ENABLE,            "SID"        NUMBER NOT NULL ENABLE,            "SERIAL#"    NUMBER NOT NULL ENABLE,            "USER#"      NUMBER NOT NULL ENABLE,            "SQL_ID"     VARCHAR2(13 BYTE),            "JOB"        NUMBER,            "ID"         NUMBER,            "PARENT_ID"  NUMBER,            "SEQ_NUMBER" NUMBER,            "TIME" TIMESTAMP (6)WITH TIME ZONE NOT NULL ENABLE,        "LOG_LEVEL"    NUMBER(4,0) NOT NULL ENABLE,        "DEPTH"        NUMBER(4,0),        "OPERATION"    VARCHAR2(15 BYTE) NOT NULL ENABLE,        "SUBOPERATION" VARCHAR2(20 BYTE),        "STATUS"       VARCHAR2(10 BYTE) NOT NULL ENABLE,        "NAME"         VARCHAR2(20 BYTE) NOT NULL ENABLE,        "VALUE"        VARCHAR2(4000 BYTE),        "DETAILS" CLOB        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "DETAILS"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."INST_ID"IS    'Instance ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SID"IS    'Session ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SERIAL#"IS    'Session serial#';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."USER#"IS    'User ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SQL_ID"IS    'Executing SQL statement ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."JOB"IS    'Identifier of job';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."PARENT_ID"IS    'Parent operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."TIME"IS    'Time of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."LOG_LEVEL"IS    'Verbosity level of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DEPTH"IS    'Nesting depth of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."OPERATION"IS    'Current operation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SUBOPERATION"IS    'Current suboperation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."STATUS"IS    'Status of current operation';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."NAME"IS    'Name of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."VALUE"IS    'Value of record';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DETAILS"IS    'Extra information for record';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"IS    'Cube operations log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407301C00018$$" ON "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE REJECTED RECORDS CREATE TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"        (            "ID"            NUMBER,            "SEQ_NUMBER"    NUMBER,            "ERROR#"        NUMBER(8,0) NOT NULL ENABLE,            "ERROR_MESSAGE" VARCHAR2(2000 BYTE),            "RECORD#"       NUMBER(38,0),            "SOURCE_ROW" ROWID,            "REJECTED_RECORD" CLOB        )        SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE        (            INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT        )        TABLESPACE "ATTRIBDW_DATA" LOB        (            "REJECTED_RECORD"        )        STORE AS BASICFILE        (            TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)        ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ID"IS    'Current operation ID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SEQ_NUMBER"IS    'Cube build log sequence number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR#"IS    'Error number being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR_MESSAGE"IS    'Error text being reported';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."RECORD#"IS    'Rejected record number';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SOURCE_ROW"IS    'Rejected record''s ROWID';    COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."REJECTED_RECORD"IS    'Rejected record copy';    COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"IS    'Cube rejected records log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407304C00007$$" ON "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"    (        PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;

  Read the article

• Error while updating

  - by Alwin Doss

  I get the following error while updating ubuntu 12.04 LTS installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 430284 files and directories currently installed.) Preparing to replace libxml2-dev 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2-dev_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2-dev ... Preparing to replace libxml2 2.7.8.dfsg-5.1ubuntu4.1 (using .../libxml2_2.7.8.dfsg-5.1ubuntu4.2_i386.deb) ... Unpacking replacement libxml2 ... Preparing to replace gstreamer0.10-plugins-bad 0.10.22.3-2ubuntu2 (using .../gstreamer0.10-plugins-bad_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement gstreamer0.10-plugins-bad ... Preparing to replace libgstreamer-plugins-bad0.10-0 0.10.22.3-2ubuntu2 (using .../libgstreamer-plugins-bad0.10-0_0.10.22.3-2ubuntu2.1_i386.deb) ... Unpacking replacement libgstreamer-plugins-bad0.10-0 ... Preparing to replace ubuntu-keyring 2011.11.21 (using .../ubuntu-keyring_2011.11.21.1_all.deb) ... /var/lib/dpkg/info/samba4.postinst: 14: /var/lib/dpkg/info/samba4.postinst: /usr/share/samba/setoption.pl: Permission denied dpkg: error processing samba4 (--configure): subprocess installed post-installation script returned error exit status 126

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >