Search Results

Search found 5469 results on 219 pages for 'compare and swap'.

Page 117/219 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Moving Windows 7 OEM from one hard disk to another but retaining the rest of the hardware

  - by Dane

  I think this should be very easy but it doesn't seem like there's a whole lot of info out there. I've personally never done this exact maneuver because I've never needed to retain the OEM licence before. I have a laptop and I wish to simply swap out the hard disk with a bigger one but keep the Windows installation and files intact. Do I use Windows Backup and Restore and burn DVDs or do I just Acronis or something similar. Or is there an even easier way of doing this involving a third party desktop? Any help much appreciated.

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• HP DL380 G5 Predictive failure of a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• cloud hosting with only root partition

  - by user123198

  We are starting a website possibly with couple of thousands hits every day and few thousands registered users. By our hosting provider we were adviced to go with cloud hosting which we can easily expand later if we need. It is Ubuntu 11 running in WM. The problem we run into is the disk is divided only in root and swap partition which is not advised from security point of view. When consulting this with technical support we got the reply that it is not possible to make more partitions and that it is mainly issue with windows server and linux is generally fine. I'm looking here for an advice if we should switch the hosting for perhaps dedicated server where we have the full control or it is something not too be worried about too much.

  Read the article

• Cloned Windows 7 to new HDD and want to change the drive letter to C

  - by Hoppe

  I used Clonezilla to clone my existing hard drive to a new one I bought. I then changed the BIOS to set the new drive as the first in the boot sequence. I'm pretty sure that I'm still running Windows 7 on the old drive. My old drive is marked as C. Now that I don't have a disk drive any more, how I do I swap the drive letter from J: to C:? I tried to change it in the disk management section of "Manage", but it reports: "the parameter is incorrect".

  Read the article

• Survive a Software Audit

  - by rosepost1150

  I received a letter from Autodesk asking for a "License Assessment". I understand it as a software audit. They plan to do it remotely. The thing is, I'm a freelancer, I don't use any Software Asset Mangment software, and I just recently swap out my hard drive for a new one, and did a complete clean install, and then I received this request from Autodesk. There is almost nothing on my hard drive now. What do software auditors do when they experience this? Will they (are they allowed) to contact my clients (that info is all over the web..) to get information since they found nothing here?

  Read the article

• rsync (or robocopy) from multiple computers - what happens?

  - by TheCleaner

  If a Linux server has two different rsync jobs nightly for the same folder to two different destinations, do both destinations end up with the same end set of files? Or does the first job run, and set something on the source folder/files that would cause the 2nd rsync job to not realize the daily changes/updates to the source? Same for a Windows environment using something like robocopy, or even a "differential" backup using BUE or similar. Does each "sync" compare the destination to the source and update the destination regardless of if it is synced multiple times to different destinations?

  Read the article

• Is there a tool for verifying the contents of a Zip archive against the source directory's contents?

  - by Basil

  Here's the scenario: I create a ZIP archive using some GUI package like WinZip, 7-Zip or whatever by right-clicking on a directory "somename" and selecting "Compress to archive 'somename.zip'" When the archive is completed, I open it and discover that some files don't exist in the archive (for reasons yet unknown). I want to find all files that are missing from the archive without having to extract the archive to another directory, then doing directory diff, etc. So.. Is there a tool (GUI or command-line, standalone or built into a compressor, for Windows or Linux, I don't care) that can walk through an archive and compare its contents against a directory on the filesystem?

  Read the article

• HDDs randomly falling off raid

  - by michael

  I really need help on this it's Saturday long weekend.No customer service help:( .I recently build new server/light duty desktop.Main purpose is only file sharing.Raid configuration :Adaptec 6805 ,8x 3TB HDD WD Red,Intel RES2SV240 expander,Raid 6,set in Intel mobo DZ 77GA-70K.I upgraded firmwares, but I'm having strange problem. During Build Verify segment 7 got missing.I just reinsert drive into hot swap bay and it started to rebuild Array.After rebuild was done another segments 0 and 5 gone missing while build/verify.I reinserted drives and now I'm praying that raid is going to rebuild successfully from remaining 6 drives,because i already transfer some data on it(I know it was bad idea).I checked S.M.A.R.T on missing drives , it only says link failure and aborted commands on one of them.No Errors on HDDs.Connections and cables are good.I added 2 fans blowing on RAID controller because it was getting too hot, so I guess overheating shouldn't be issue.What can be possibly wrong? Thank you for help.

  Read the article

• Applications getting killed automatically

  - by nebi

  I am running httperf client on my m/c and after few seconds it is getting killed. dmesg shows: The command is: httperf --hog --client=0/1 --server=39.0.0.2 --port=80 --uri=/50kb --rate=20000 --send-buffer=4096 --recv-buffer=16384 --num-conns=6000000 --num-calls=1 Although I had done this test no. of times but never faced this error any time. From last two days I am observing this. My Ubuntu version is ubuntu 10.04. and httperf version is httperf-0.9.0 [ 2997.180620] Out of memory: kill process 7977 (apache2) score 70532 or a child [ 2997.180632] Killed process 7977 (apache2) [ 2997.184837] Out of memory: kill process 7971 (rsyslogd) score 8702 or a child [ 2997.184844] Killed process 7971 (rsyslogd) [ 2997.188823] Out of memory: kill process 7978 (apache2) score 1354 or a child [ 2997.188829] Killed process 7978 (apache2) [ 2997.192817] Out of memory: kill process 7973 (atd) score 561 or a child [ 2997.192822] Killed process 7973 (atd) [ 2997.196805] Out of memory: kill process 8102 (httperf) score 471 or a child [ 2997.196811] Killed process 8102 (httperf) Output of free command: total used free shared buffers cached Mem: 3862768 163000 3699768 0 2384 13068 -/+ buffers/cache: 147548 3715220 Swap: 3905528 0 3905528

  Read the article

• How should oracle vbox look like in terms of Memory, CPU and Performance? [duplicate]

  - by Nicholas DiPiazza

  This question already has an answer here: Can you help me with my capacity planning? 2 answers I've got a need for a ton of VMs to simulate some realistic load testing scenarios. I've got a bunch of different host machines that differ in ram, cpu's, etc. What should my resource manager look like? Is there a standard way to know what the CPU, Memory and Disk Utilization should be given your CPUs + Memory available + Disks available? For example, I have a box: MemTotal: 50 Gb CPUs: 8 CPUs are pretty much 100% all day long. Memory is at about 60%. Swap not getting hit. Little bewildered by why the VMs, while doing the exact same test script, are showing different virtual memory consumption. Huh.

  Read the article

• How do I reduce RAM usage on my server?

  - by Abs

  I have recently launched a site that is very popular but I am having trouble with scalability. My site makes heavy use of FFmpeg and at peak times RAM usage hits the 2 GB point quickly and the swap file starts getting used. CPU usage starts rising too. Users complain that the site is slow. They say this because all FFmpeg instances run very slow because of the number running at the same time. Users make use of FFmpeg on my server in real time. Is there anything I can consider or do to ease down the usage of the server and RAM just shooting up? Maybe there is something better than FFmpeg (!). Is the only solution "throwing some cash" at a more powerful server? I have given little information, please ask for more, so this problem can be solved.

  Read the article

• For very beginning startup: home server or EC2?

  - by StCee

  The micro instance of Amazon EC2 only has ram of 613MB, my laptop got 8GB. And I suppose likewise the processing power of my computer would be better than the micro instance. My question is, what are the considerations in deciding to host yourself or on Amazon EC2, especially for a really baby startup? For example, would network speed be a problem? My computer broadband network is 100Mbs up to 1Gbs. What would Amazon compare to this? My site at these moment would just host some images and perform some php requests. I would probably also use cloudflare but seems it increases the dns lookup time considerably... And of course the overall objective is to make the best user experience.

  Read the article

• Which OS should I boot into for virtualization?

  - by acidzombie24

  This might be a silly question. I use windows 7 99% of the time. I run linux 10% of the time and XP 5% of the time. I am thinking about getting a Intel® Core™ i7-2600 Processor which has hardware support for virtualization. I dont think i want more than one partition. May have a swap partition. Which OS should I make my primary (and only) partition? I suspect windows7 if i am always using it as going through a linux layer would slow it down. Does it matter much which OS i use if i have hardware support for virtualization? At the moment I am using VMWare player. I suspect software doesnt effect performance?

  Read the article

• Mystery process crashing machine by using all of the RAM - how to identify?

  - by wd40

  I have a Linux machine which runs ~10 in house written processes. Every other day(!) the machine completely runs out of RAM, goes into swap and becomes unresponsive. This happens quickly over a period of a couple of seconds, so it's not feasible to sit watching the machine until it dies. It's a sudden leak, not a gradual one, so top(1) doesn't give any indications something bad may about to happen. What is the best way of identifying which process(es) are causing the trouble?

  Read the article

• Why Virtualbox VDI doubles the space of the VM hard disk?

  - by logoff

  I have one Xubuntu 12.10 64 bit Virtualbox VM on a Windows 7 64 bit host. It has one dynamic allocated hard disk with VDI format with maximum capacity of 20GB. If I use a command df -h in the VM I get that 5.3GB are in use in th main partition. I have only 2 partitions, one for the ext4 hard disk and another with 512MB of swap. I have no snapshots. The VDI file of this VM has 10.7GB. It is normal this difference of space? It is caused because the VDI format?

  Read the article

• Does multi-platter hard-drive use all of their heads to read simultaneously?

  - by WiSaGaN

  Suppose we have a harddisk with 2 platters with characteristics below: Rotational rate: 10, 000 RPM Avg sectors/track: 1000 Surfaces: 4 Sector size: 512 bytes I was reading "Computer Systems: A Programmer's Perspective 2ed" when I found that it calculates transfer time as if it only uses ONE head to read a sector. If that's the case, why not use 4 heads to write(read) on 4 surfaces? So when I write a 2K bytes file, each head should only need to wait for the platters to rotate just one sector length instead of 4, thus reducing the transfer time by a factor of 4. Or even redesign sector to make each sector on one cylinder but on 4 tracks residing same position respectively on 4 surfaces. Each one of (512/4) bytes. So when the hd needs to read a sector of 512 bytes, we only need the disk to rotate roughly 1/4 compare to original time. The idea looks like RAID 0.

  Read the article

• Understanding RAM usage on Linux

  - by stebbo

  I'm completely new to Linux and I'm just trying to understand where all my RAM is going. I've got a pretty fresh install of Xubuntu running as a VMWare guest, and I've given it 1.5GB RAM to play with. After only running two apps starting up Tomcat servers and also running Firefox, I've got hardly anything left. 160MB according to free -m. Looking at the output from Top, I see Java appearing twice, each stealing about 1/2 Gig resident memory. Both Tomcat instances use the same jdk, I would have thought I'd only see Java there once. What's the story? I had a screenshot but unfortunately couldn't post it being under 10 rep. Update The free -m output requested: total used free shared buffers cached Mem: 1419 1380 39 0 8 111 -/+ buffers/cache: 1259 160 Swap: 509 68 441 Top (coming)

  Read the article

• Saving backup files automatically in (g)Vim after saving a file.

  - by Somebody still uses you MS-DOS

  I had a problem with my gVim. I lost some important modifications after I plugged on my machine after a hibernating process. To avoid this kind of problem, I would like to know if it's possible to add something in my .vimrc (or a plugin) that automatically backups all saving made to my files. Disk space is not an issue, I can delete these files after. I'm already using set backup set backupdir=~/.backup/vim set directory=~/.swap/vim This creates a myfile.extension~ in my .backup/vim. ...but I would like this configuration to add ~ to first save, ~0 to second, ~1 to third, ~2 to fourth, and so on - something that keeps copies from all modifications I made to a file. Is this possible? Do you know if there's a plugin for this?

  Read the article

• Should I upgrade memory for my dedicated server?

  - by mc1000

  My memory usage hangs around 25% (swap is generally 1%) on my dedicated server and load is around 2-5. My host recommended that I upgrade from 2GB of ram to 4GB so that I can increase my innodb_buffer from the default 16MB to 2GB. My innodb table size is 2GB. My question is, given that ram usage is 25% does it make sense to upgrade ram? Queries are hanging sometimes, so I'm thinking that a bigger innodb_buffer could decrease load on the database, just not sure if I really need to upgrade my ram first.

  Read the article

• Find RARs with duplicate content

  - by Scott McClenning

  I need a utility to find RAR files that contain duplicate data (i.e. files within the RAR that hash the same, but could have different names). I can open the RARs and see the CRCs are the same, but I was hoping for a more automated process that would work in bulk (hundreds of files). Hashing the overall RAR won't help because the file contained within could have different names, or the archive could be compressed at different levels. If needed, a utility that would extract the contents of the RARs and then compare would work, but is not preferred. I would prefer a free utility for Windows, but a pay utility or a utility for Linux would be acceptable.

  Read the article

• How can I find out what modifications a program’s installer makes?

  - by Gregory MOUSSAT

  I want to know what some installers do: mainly what files, folders, and registry entries they add, remove, or modify. Lots of “ professional” programs are so poorly documented that it’s difficult to find the proper way to configure them, update them, etc. InstallRite is a program which is able to take a “snapshot” before and after the installation of a program and then compare the snapshots. This allows you to know what was done and even to create a custom uninstaller. Unfortunately InstallRite seems to no longer be maintained and has not been updated since 2008.

  Read the article

• How do I open 2 instances of the same file in notepad++ side by side with their own scrollbars in a single Notepad++ window?

  - by Qlidnaque

  I remember doing this a long time ago and have forgotten how I had done it. I like to do this when I have long html or php files to edit and I need part of the code from further down the file in a place nearer to the top, or when I want to compare different parts of the same file. There was a way to do this without opening two instances of Notepad++ and when I clicked on save, it made the saved changes in both instances of the opened file (whereas if I have 2 windows of Notepad++ opened simultaneously, it will prompt me to either update or not update the second opened instance if the first one was saved midway.)

  Read the article

• Using windows 7 and fedora

  - by vedant1811

  I need to partition my hard disk for windows and fedora (root, swap, users). I thought of creating 3 (primary drives). 2 small ones (~5GB) each for win7 and fedora and a large (~700GB) for common files (pictures, vidoes, documents, etc.) one. Please Tell me which file systems to use in each case and the set-up of primary and extended partitions. Also I want to know, where and on which file system should the Linux Grub (my choice of OS chooser) be installed. I have just a bought a new Asus K53S and using the Fedora Installer Partitioner (Anaconda). Your help is greatly appreciated.

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >