Search Results

Search found 31421 results on 1257 pages for 'software performance'.

Page 1174/1257 | < Previous Page | 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181  | Next Page >

• Commercial Website architecture question

  - by Maxime ARNSTAMM

  Hello everyone, I have to write an architecture case study but there are some things that i don't know, so i'd like some pointers on the following : The website must handle 5k simultaneous users. The backend is composed by a commercial software, some webservices, some message queues, and a database. I want to recommend to use Spring for the backend, to deal with the different elements, and to expose some Rest services. I also want to recommend wicket for the front (not the point here). What i don't know is : must i install the front and the back on the same tomcat server or two different ? and i am tempted to put two servers for the front, with a load balancer (no need for session replication in this case). But if i have two front servers, must i have two back servers ? i don't want to create some kind of bottleneck. Based on what i read on this blog a really huge charge is handle by one tomcat only for the first website mentionned. But i cannot find any info on this, so i can't tell if it seems plausible. If you can enlight me, so i can go on in my case study, that would be really helpful. Thanks :)

  Read the article

• Help Me With This Access Query

  - by yae

  I have 2 tables: "products" and "pieces" PRODUCTS idProd product price PIECES id idProdMain idProdChild quant idProdMain and idProdChild are related with the table: "products". Other considerations is that 1 product can have some pieces and 1 product can be a piece. Price product equal a sum of quantity * price of all their pieces. "Products" table contains all products (p EXAMPLE: TABLE PRODUCTS (idProd - product - price) 1 - Computer - 300€ 2 - Hard Disk - 100€ 3 - Memory - 50€ 4 - Main Board - 100€ 5 - Software - 50€ 6 - CDroms 100 un. - 30€ TABLE PIECES (id - idProdMain - idProdChild - Quant.) 1 - 1 - 2 - 1 2 - 1 - 3 - 2 3 - 1 - 4 - 1 WHAT I NEED? I need update the price of the main product when the price of the product child (piece) is changed. Following the previous example, if I change the price of this product "memory" (is a piece too) to 60€, then product "Computer" will must change his price to 320€ How I can do it using queries? Already I have tried this to obatin the price of the main product, but not runs. This query not returns any value: SELECT Sum(products.price*pieces.quant) AS Expr1 FROM products LEFT JOIN pieces ON (products.idProd = pieces.idProdChild) AND (products.idProd = pieces.idProdChild) AND (products.idProd = pieces.idProdMain) WHERE (((pieces.idProdMain)=5)); MORE INFO The table "products" contains all the products to sell that it is in the shop. The table "pieces" is to take a control of the compound products. To know those who are the products children. For example of compound product: computers. This product is composed by other products (motherboard, hard disk, memory, cpu, etc.)

  Read the article

• Using a string inside the DocumentBuilder parse method (need it for parsing XML using XPath)

  - by dierre

  Hi guys! I'm trying to create a RESTful webservice using a Java Servlet. The problem is I have to pass via POST method to a webserver a request. The content of this request is not a parameter but the body itself. So I basically send from ruby something like this: url = URI.parse(@host) req = Net::HTTP::Post.new('/WebService/WebServiceServlet') req['Content-Type'] = "text/xml" # req.basic_auth 'account', 'password' req.body = data response = Net::HTTP.start(url.host, url.port){ |http| puts http.request(req).body } Then I have to retrieve the body of this request in my servlet. I use the classic readline, so I have a string. The problem is when I have to parse it as XML: private void useXML( final String soft, final PrintWriter out) throws ParserConfigurationException, SAXException, IOException, XPathExpressionException, FileNotFoundException { DocumentBuilderFactory domFactory = DocumentBuilderFactory.newInstance(); domFactory.setNamespaceAware(true); // never forget this! DocumentBuilder builder = domFactory.newDocumentBuilder(); Document doc = builder.parse(soft); XPathFactory factory = XPathFactory.newInstance(); XPath xpath = factory.newXPath(); XPathExpression expr = xpath.compile("//software/text()"); Object result = expr.evaluate(doc, XPathConstants.NODESET); NodeList nodes = (NodeList) result; for (int i = 0; i < nodes.getLength(); i++) { out.println(nodes.item(i).getNodeValue()); } } The problem is that builder.parse() accepts: parse(File f), parse(InputSource is), parse(InputStream is). Is there any way I can transform my xml string in an InputSource or something like that? I know it could be a dummy question but Java is not my thing, I'm forced to use it and I'm not very skilled.

  Read the article

• AnyCPU/x86/x64 for C# application and it's C++/CLI dependency

  - by Soonts

  I'm Windows developer, I'm using Microsoft visual studio 2008 SP1. My developer machine is 64 bit. The software I'm currently working on is managed .exe written in C#. Unfortunately, I was unable to solve the whole problem solely in C#. That's why I also developed a small managed DLL in C++/CLI. Both projects are in the same solution. My C# .exe build target is "Any CPU". When my C++ DLL build target is "x86", the DLL is not loaded. As far as I understood when I googled, the reason is C++/CLI language, unlike other .NET languages, compiles to the native code, not managed code. I switched the C++ DLL build target to x64, and everything works now. However, AFAIK everything will stop working as soon as my client will install my product on a 32-bit OS. I have to support Windows Vista and 7, both 32 and 64 bit versions of each of them. I don't want to fall back to 32 bits. That 250 lines of C++ code in my DLL is only 2% of my codebase. And that DLL is only used in several places, so in the typical usage scenario it's not even loaded. My DLL implements two COM objects with ATL, so I can't use "/clr:safe" project setting. Is there way to configure the solution and the projects so that C# project builds "Any CPU" version, the C++ project builds both 32 bit and 64 bit versions, then in the runtime when the managed .EXE is starting up, it uses either 32-bit DLL or 64-bit DLL depending on the OS? Or maybe there's some better solution I'm not aware of? Thanks in advance!

  Read the article

• Creating Emulated iSCSI Target in a Lab/Testing Environment using Windows Server 2008 R2

  - by Brian McCleary

  We have a single server running Windows Server 2008 with Hyper-V installed running 5 virtual machines. I have purchased a second DELL R805 Server so that we can create a fail-over cluster to our current R805 that is currently in production. Right now, our R805 connects via iSCSI to a MD3000i iSCSI SAN. Before we try to roll out the second server and clustering to our production environment, I want to be able to test and "play with" the clustering features in our lab before rolling it out. The problem is that I don't want to spend a couple thousand dollars on another iSCSI SAN server just for testing. I already have two servers in my lab that are installed with Windows Server 2008 R2 64bit (one is the R805 and another spare desktop that was laying around) and with the Hyper-V roll enabled that should be ready to test with, but I don't have an iSCSI target to use as the Cluster Shared Volume. Is there anyway to install, either on a Hyper-V image or on a external spare computer that we have some sort of emulated iSCSI target? In our lab, we obviously don't need a real SAN, just something that we can test out how to setup the clustering properly outside of our production environment. Any advise is appreciated. FYI - I have read Jose Barret's blog on WUDSS at http://blogs.technet.com/josebda/archive/2008/01/07/installing-the-evaluation-version-of-wudss-2003-refresh-and-the-microsoft-iscsi-software-target-version-3-1-on-a-vm.aspx, but it seems awfully complex. I'm hoping for an easier solution.

  Read the article

• Tablet interface for the physically disabled?

  - by Glenn

  My sister has Cerebral Palsy, which in her case means she has only gross motor control and her speech is slurred. Implications should be obvious: traditional computer/phone/tablet interfaces won't work for her and she can't speak clearly enough for speech recognition software to help her at all. She enjoys reading but has difficulty holding the book and/or turning a page. There are a few options for helping her use a computer, but nothing for tablets or eReaders. That's where you come in. I would like to make (or buy, if such a thing exists) a better interface to an Android tablet that would work for someone with little to no physical dexterity or speech ability. I'd also be interested in work on the Kindle or iPad, but I'm most familiar with Android so I'm starting there. I know Android has Bluetooth capability. Is it possible to interface a joystick to control the Android device? By "control", I mean the entire operating system - selecting an app, launching it, controlling the menus, etc. I want to give her control over the whole thing, not just a specific app. On a PC this can be accomplished by creating a generic USB HID interface and an arcade joystick to move the mouse over the screen and click on thigns. Is it possible to do something like that in Android? Any help you can offer would be greatly appreciated. Thanks!

  Read the article

• Variable lenght arguments in log4cxx LOG4CXX_ macros

  - by Horacio

  I am using log4cxx in a big C++ project but I really don't like how log4cxx handles multiple variables when logging: LOG4CXX_DEBUG(logger, "test " << var1 << " and " << var3 " and .....) I prefer using printf like variable length arguments: LOG4CXX_DEBUG(logger, "test %d and %d", var1, var3) So I implemented this small wrapper on top of log4cxx #include <string.h> #include <stdio.h> #include <stdarg.h> #include <log4cxx/logger.h> #include "log4cxx/basicconfigurator.h" const char * log_format(const char *fmt, ...); #define MYLOG_TRACE(logger, fmt, ...) LOG4CXX_TRACE(logger, log_format(fmt, ## __VA_ARGS__)) #define MYLOG_DEBUG(logger, fmt, ...) LOG4CXX_DEBUG(logger, log_format(fmt, ## __VA_ARGS__)) #define MYLOG_INFO(logger, fmt, ...) LOG4CXX_INFO(logger, log_format(fmt, ## __VA_ARGS__)) #define MYLOG_WARN(logger, fmt, ...) LOG4CXX_WARN(logger, log_format(fmt, ## __VA_ARGS__)) #define MYLOG_ERROR(logger, fmt, ...) LOG4CXX_ERROR(logger, log_format(fmt, ## __VA_ARGS__)) #define MYLOG_FATAL(logger, fmt, ...) LOG4CXX_FATAL(logger, log_format(fmt, ## __VA_ARGS__)) static log4cxx::LoggerPtr logger(log4cxx::Logger::getRootLogger()); int main(int argc, char **argv) { log4cxx::BasicConfigurator::configure(); MYLOG_INFO(logger, "Start "); MYLOG_WARN(logger, log_format("In running this in %d threads safe?", 1000)); MYLOG_INFO(logger, "End "); return 0; } const char *log_format(const char *fmt, ...) { va_list va; static char formatted[1024]; va_start(va, fmt); vsprintf(formatted, 1024, fmt, va); va_end(va); return formatted; } And this works perfectly but I know using that static variable (formatted) can become problematic if I start using threads and each thread logging to the same place. I am no expert in log4cxx so I was wondering if the LOG4CXX macros are handling concurrent thread access automatically? or do I have to implement some sort of locking around the log_format method? something that I wan't to avoid due to performance implications. Also I would like to ask why if I replace the vsprintf inside the log_format method with vsnprintf (that is more secure) then I get nothing printed? To compile and test this program (in Ubuntu) use : g++ -o loggertest loggertest.cpp -llog4cxx

  Read the article

• Alternative to 'Dispatch for ASP' deployment plug-in?

  - by Django Reinhardt

  Hi there, we've recently stumbled across the excellent Dispatch for ASP deployment plug in. It looks great apart from one thing: It doesn't work with Visual Studio 2010, at least for us, anyway. (It's supposed to work fine.) (Yes, we've tried everything: We've managed to get Dispatch working for another FTP site, but not the main one we regularly deploy to. We have managed to connect to our main site through FileZilla FTP, so the site itself is configured correctly. All settings have been triple checked, but the software still throws up weird errors (always to do with its internal libraries).) So does anyone know of any other comparable FTP-based, deployment plug-ins for Visual Studio? Here's what Dispatch does (and so any suggested replacement must do): Monitor any altered files in the project. When a file is changed, it's added to a list of files to be deployed. To deploy these files to the live site, all we need to do is click "Upload" and the plugin will connect via FTP to our live site and upload all the files. We can filter out any filenames we don't want to be monitored/uploaded (e.g. .cs or web.config or /Images/, etc.) I think that's all the features that we need. Thanks for any suggestions!

  Read the article

• With logback not able to send mail..? any body please help.....with is

  - by Urvish

  please go through following.... <appender name="stdout" class="ch.qos.logback.core.ConsoleAppender"> <layout class="ch.qos.logback.classic.PatternLayout"> <Pattern>%d %p %c - %m%n</Pattern> </layout> </appender> <!-- --> <!-- Declare the SMTPAppender --> <!-- --> <appender name="EMAIL" class="ch.qos.logback.classic.net.SMTPAppender"> <SMTPHost>smtp.gmail.com</SMTPHost> <To>[email protected]</To> <From>[email protected]</From> <Subject>ERROR: %logger{20} - %m</Subject> <Username>******</Username> <Password>******</Password> <layout class="ch.qos.logback.classic.PatternLayout"> <Pattern>%date %-5level %logger{35} - %message%n</Pattern> </layout> </appender> <appender name="R" class="ch.qos.logback.core.rolling.RollingFileAppender"> <!--See also http://logback.qos.ch/manual/appenders.html#RollingFileAppender--> <File>example.log</File> <layout class="ch.qos.logback.classic.PatternLayout"> <Pattern>%d %p - %m%n</Pattern> </layout> <rollingPolicy class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy"> <maxIndex>4</maxIndex> <FileNamePattern>example.log.%i</FileNamePattern> </rollingPolicy> <triggeringPolicy class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy"> <MaxFileSize>500KB</MaxFileSize> </triggeringPolicy> </appender> <logger name="org.springframework" level="WARN"/> <logger name="org.springframework.jdbc.core.JdbcTemplate" level="WARN"/> <logger name="org.springframework.jdbc.core.StatementCreatorUtils" level="WARN"/> <logger name="org.springframework.security.web.FilterChainProxy" level="WARN"/> <logger name="com.logicwind" level="INFO"/> <logger name="performance" level="INFO"/> <!--<logger name="org.apache.struts2" level="DEBUG"/> -- -- </root>

  Read the article

• Unable to set up ODBC after installing ODAC (Xcopy)

  - by rwilson513

  We are trying to use ODAC Xcopy to minimize the footprint of installing Oracle 11g Client. Currently, we use the Oracle 11g Admin install (~700mb). I've tried using the ODAC Xcopy, and that works. However, the only issue I now have is that I cannot set up an ODBC on the target system by just installing the ODAC Xcopy. After installing ODAC (Windows XP fyi), I go to Control Panel--Admin Tools--Data Sources (ODBC)--System DSN--Add--Microsoft ODBC for Oracle. I get the following error: "The Oracle(tm) client and networking components were not found. These components are supplied by Oracle and are part of the Oracle Version 7.3 (or greater) client software installation. You will be unable to use this driver until these components have been installed." I've tried editing the registry and creating the same keys that the Oracle Admin install creates, but still no luck. I'm not sure how to get past this. Any suggestions? Thanks in advance.

  Read the article

• Null Pointer Exception in Primavera P6 8.1

  - by gwrichard

  I am getting a null pointer exception in a Primavera P6 8.1 installation. The exception only occurs in one section of the web-client: Application settings.P6 web and the P6 API are deployed on the same WebLogic (10.3.5) node running on a Windows Server 2008 R2 installation. I have done this installation using this same software stack a dozen times and don't have this issue on any of the other installs. Exact error below: Match: beginTraversal Match: digest selected JREDesc: JREDesc[version 1.6.0_20+, heap=-1--1, args=null, href=http://java.sun.com/products/autodl/j2se, sel=false, null, null], JREInfo: JREInfo for index 0: platform is: 1.7 product is: 1.7.0_17 location is: http://java.sun.com/products/autodl/j2se path is: C:\Program Files (x86)\Java\jre7\bin\javaw.exe args is: null native platform is: Windows, x86 [ x86, 32bit ] JavaFX runtime is: JavaFX 2.2.7 found at C:\Program Files (x86)\Java\jre7\ enabled is: true registered is: true system is: true Match: ignoring maxHeap: -1 Match: ignoring InitHeap: -1 Match: digesting vmargs: null Match: digested vmargs: [JVMParameters: isSecure: true, args: ] Match: JVM args after accumulation: [JVMParameters: isSecure: true, args: ] Match: digest LaunchDesc: http://localhost:7001/p6/action/jnlp/appletsjnlp.jnlp?mainClass=com.primavera.pvapplets.adminpreferences.AdminPreferencesApplet&classPath=adminpreferences.jar,prm-applets-common.jar,forms-1.0.7.jar,prm-guisupport.jar,prm-to.jar,jide.jar,tablesupport.jar,formsupport.jar,applets-bo.jar,commons-lang.jar,prm-common.jar,resource_strings.jar,prm-img.jar,commons-logging.jar&name=AdminPreferences&version=8.1.2.0.0602 Match: digest properties: [] Match: JVM args: [JVMParameters: isSecure: true, args: ] Match: endTraversal .. Match: JVM args final: Match: Running JREInfo Version match: 1.7.0.17 == 1.7.0.17 Match: Running JVM args match: have:<> satisfy want:<> Java Plug-in 10.17.2.02 Using JRE version 1.7.0_17-b02 Java HotSpot(TM) Client VM User home directory = C:\Users\gwrichard ---------------------------------------------------- c: clear console window f: finalize objects on finalization queue g: garbage collect h: display this help message l: dump classloader list m: print memory usage o: trigger logging q: hide console r: reload policy configuration s: dump system and deployment properties t: dump thread list v: dump thread stack x: clear classloader cache 0-5: set trace level to <n> ----------------------------------------------------

  Read the article

• Password hashing, salt and storage of hashed values

  - by Jonathan Leffler

  Suppose you were at liberty to decide how hashed passwords were to be stored in a DBMS. Are there obvious weaknesses in a scheme like this one? To create the hash value stored in the DBMS, take: A value that is unique to the DBMS server instance as part of the salt, And the username as a second part of the salt, And create the concatenation of the salt with the actual password, And hash the whole string using the SHA-256 algorithm, And store the result in the DBMS. This would mean that anyone wanting to come up with a collision should have to do the work separately for each user name and each DBMS server instance separately. I'd plan to keep the actual hash mechanism somewhat flexible to allow for the use of the new NIST standard hash algorithm (SHA-3) that is still being worked on. The 'value that is unique to the DBMS server instance' need not be secret - though it wouldn't be divulged casually. The intention is to ensure that if someone uses the same password in different DBMS server instances, the recorded hashes would be different. Likewise, the user name would not be secret - just the password proper. Would there be any advantage to having the password first and the user name and 'unique value' second, or any other permutation of the three sources of data? Or what about interleaving the strings? Do I need to add (and record) a random salt value (per password) as well as the information above? (Advantage: the user can re-use a password and still, probably, get a different hash recorded in the database. Disadvantage: the salt has to be recorded. I suspect the advantage considerably outweighs the disadvantage.) There are quite a lot of related SO questions - this list is unlikely to be comprehensive: Encrypting/Hashing plain text passwords in database Secure hash and salt for PHP passwords The necessity of hiding the salt for a hash Clients-side MD5 hash with time salt Simple password encryption Salt generation and Open Source software I think that the answers to these questions support my algorithm (though if you simply use a random salt, then the 'unique value per server' and username components are less important).

  Read the article

• What can be the reason for Windows error ERROR_DISK_FULL (112) when opening a NTFS alternate data st

  - by ur

  My application writes some bytes of data to an alternate data stream. This works fine on all but one machine (Windows Server 2003 SP2). Instead, CreateFile returns ERROR_DISK_FULL when I try to create an alternate data stream (on the root directory). I don't find the reason for this result, because... There's plenty of space on that drive. The drive is NTFS formatted (due to GetVolumeInformation). The drive supports altenate data streams (due to GetVolumeInformation). Edit: I can provide some more information about what the reason not is: I added many streams on a test system which didn't show the error and wondered if the error might occur. It didn't. Instead after about 2000 Streams with long file names another error occurred and persisted: 1450 (ERROR_NO_SYSTEM_RESOURCES). EDIT: Here is an example for one of the used file names: char szStreamFileName[] = "C:\\:abcdefghijklmnopqrstuvwxyz1234567890abcdefghijklmnoqrstuvwxyz012345"; EDIT: Our customer uses some corporate antivirus software from Avira on this server. Maybe this is the reason (Alternate data streams can be abused by malware).

  Read the article

• Is my objective possible using WCF (and is it the right way to do things?)

  - by David

  I'm writing some software that modifies a Windows Server's configuration (things like MS-DNS, IIS, parts of the filesystem). My design has a server process that builds an in-memory object graph of the server configuration state and a client which requests this object graph. The server would then serialize the graph, send it to the client (presumably using WCF), the server then makes changes to this graph and sends it back to the server. The server receives the graph and proceeds to make modifications to the server. However I've learned that object-graph serialisation in WCF isn't as simple as I first thought. My objects have a hierarchy and many have parametrised-constructors and immutable properties/fields. There are also numerous collections, arrays, and dictionaries. My understanding of WCF serialisation is that it requires use of either the XmlSerializer or DataContractSerializer, but DCS places restrictions on the design of my object-graph (immutable data seems right-out, it also requires parameter-less constructors). I understand XmlSerializer lets me use my own classes provided they implement ISerializable and have the de-serializer constructor. That is fine by me. I spoke to a friend of mine about this, and he advocates going for a Data Transport Object-only route, where I'd have to maintain a separate DataContract object-graph for the transport of data and re-implement my server objects on the client. Another friend of mine said that because my service only has two operations ("GetServerConfiguration" and "PutServerConfiguration") it might be worthwhile just skipping WCF entirely and implementing my own server that uses Sockets. So my questions are: Has anyone faced a similar problem before and if so, are there better approaches? Is it wise to send an entire object graph to the client for processing? Should I instead break it down so that the client requests a part of the object graph as it needs it and sends only bits that have changed (thus reducing concurrency-related risks?)? If sending the object-graph down is the right way, is WCF the right tool? And if WCF is right, what's the best way to get WCF to serialise my object graph?

  Read the article

• C++0x Overload on reference, versus sole pass-by-value + std::move?

  - by dean

  It seems the main advice concerning C++0x's rvalues is to add move constructors and move operators to your classes, until compilers default-implement them. But waiting is a losing strategy if you use VC10, because automatic generation probably won't be here until VC10 SP1, or in worst case, VC11. Likely, the wait for this will be measured in years. Here lies my problem. Writing all this duplicate code is not fun. And it's unpleasant to look at. But this is a burden well received, for those classes deemed slow. Not so for the hundreds, if not thousands, of smaller classes. ::sighs:: C++0x was supposed to let me write less code, not more! And then I had a thought. Shared by many, I would guess. Why not just pass everything by value? Won't std::move + copy elision make this nearly optimal? Example 1 - Typical Pre-0x constructor OurClass::OurClass(const SomeClass& obj) : obj(obj) {} SomeClass o; OurClass(o); // single copy OurClass(std::move(o)); // single copy OurClass(SomeClass()); // single copy Cons: A wasted copy for rvalues. Example 2 - Recommended C++0x? OurClass::OurClass(const SomeClass& obj) : obj(obj) {} OurClass::OurClass(SomeClass&& obj) : obj(std::move(obj)) {} SomeClass o; OurClass(o); // single copy OurClass(std::move(o)); // zero copies, one move OurClass(SomeClass()); // zero copies, one move Pros: Presumably the fastest. Cons: Lots of code! Example 3 - Pass-by-value + std::move OurClass::OurClass(SomeClass obj) : obj(std::move(obj)) {} SomeClass o; OurClass(o); // single copy, one move OurClass(std::move(o)); // zero copies, two moves OurClass(SomeClass()); // zero copies, one move Pros: No additional code. Cons: A wasted move in cases 1 & 2. Performance will suffer greatly if SomeClass has no move constructor. What do you think? Is this correct? Is the incurred move a generally acceptable loss when compared to the benefit of code reduction?

  Read the article

• Advanced SQL query with lots of joins

  - by lund.mikkel

  Hey fellow programmers Okay, first let me say that this is a hard one. I know the presentation may be a little long. But I how you'll bare with me and help me through anyway :D So I'm developing on an advanced search for bicycles. I've got a lot of tables I need to join to find all, let's say, red and brown bikes. One bike may come in more then one color! I've made this query for now: SELECT DISTINCT p.products_id, #simple product id products_name, #product name products_attributes_id, #color id pov.products_options_values_name #color name FROM products p LEFT JOIN products_description pd ON p.products_id = pd.products_id INNER JOIN products_attributes pa ON pa.products_id = p.products_id LEFT JOIN products_options_values pov ON pov.products_options_values_id = pa.options_values_id LEFT JOIN products_options_search pos ON pov.products_options_values_id = pos.products_options_values_id WHERE pos.products_options_search_id = 4 #code for red OR pos.products_options_search_id = 5 #code for brown My first concern is the many joins. The Products table mainly holds product id and it's image and the Products Description table holds more descriptive info such as name (and product ID of course). I then have the Products Options Values table which holds all the colors and their IDs. Products Options Search is containing the color IDs along with a color group ID (products_options_search_id). Red has the color group code 4 (brown is 5). The products and colors have a many-to-many relationship managed inside Products Attributes. So my question is first of all: Is it okay to make so many joins? Is i hurting the performance? Second: If a bike comes in both red and brown, it'll show up twice even though I use SELECT DISTINCT. Think this is because of the INNER JOIN. Is this possible to avoid and do I have to remove the doubles in my PHP code? Third: Bikes can be double colored (i.e. black and blue). This means that there are two rows for that bike. One where it says the color is black and one where is says its blue. (See second question). But if I replace the OR in the WHERE clause it removes both rows, because none of them fulfill the conditions - only the product. What is the workaround for that? I really hope you will and can help me. I'm a little desperate right now :D Regards Mikkel Lund

  Read the article

• How to retain canvas state and use it in onDraw() method

  - by marqss

  I want to make a measure tape component for my app. It should look something like this with values from 0cm to 1000cm: Initially I created long bitmap image with repeated tape background. I drew that image to canvas in onDraw() method of my TapeView (extended ImageView). Then I drew a set of numbers with drawText() on top of the canvas. public TapeView(Context context, AttributeSet attrs){ ImageView imageView = new ImageView(mContext); LayoutParams params = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.FILL_PARENT); imageView.setLayoutParams(params); mBitmap = createTapeBitmap(); imageView.setImageBitmap(mBitmap); this.addView(imageView); } private Bitmap createTapeBitmap(){ Bitmap mBitmap = Bitmap.createBitmap(5000, 100, Config.ARGB_8888); //size of the tape Bitmap tape = BitmapFactory.decodeResource(getResources(),R.drawable.tape);//the image size is 100x100px Bitmap scaledTape = Bitmap.createScaledBitmap(tape, 100, 100, false); Canvas c = new Canvas(mBitmap); Paint paint = new Paint(); paint.setColor(Color.WHITE); paint.setFakeBoldText(true); paint.setAntiAlias(true); paint.setTextSize(30); for(int i=0; i<=500; i++){ //draw background image c.drawBitmap(scaledTape,(i * 200), 0, null); //draw number in the middle of that background String text = String.valueOf(i); int textWidth = (int) paint.measureText(text); int position = (i * 100) + 100 - (textWidth / 2); c.drawText(text, position, 20, paint); } return mBitmap; } Finally I added this view to HorizontalScrollView. At the beginning everything worked beautifully but I realised that the app uses a Lot of memory and sometimes crashed with OutOfMemory exception. It was obvious because a size of the bitmap image was ~4mb! In order to increase the performance, instead of creating the bitmap I use Drawable (with the yellow tape strip) and set the tile mode to REPEAT: setTileModeX(TileMode.REPEAT); The view now is very light but I cannot figure out how to add numbers. There are too many of them to redraw them each time the onDraw method is called. Is there any way that I can draw these numbers on canvas and then save that canvas so it can be reused in onDraw() method?

  Read the article

• How can I tackle 'profoundly found elsewhere' syndrome (inverse of NIH)?

  - by Alistair Knock

  How can I encourage colleagues to embrace small-scale innovation within our team(s), in order to get things done quicker and to encourage skills development? (the term 'profoundly found elsewhere' comes from Wikipedia, although it is scarcely used anywhere else apart from a reference to Proctor & Gamble) I've worked in both environments where there is a strong opposition to software which hasn't been developed in-house (usually because there's a large community of developers), and more recently (with far fewer central developers) where off-the-shelf products are far more favoured for the usual reasons: maintenance, total cost over product lifecycle, risk management and so on. I think the off the shelf argument works in the majority of cases for the majority of users, even though as a developer the product never quite does what I'd like it to do. However, in some cases there are clear gaps where the market isn't able to provide specifically what we would need, or at least it isn't able to without charging astronomical consultancy rates for a bespoke solution. These can be small web applications which provide a short-term solution to a particular need in one specific department, or could be larger developments that have the potential to serve a wider audience, both across the organisation and into external markets. The problem is that while development of these applications would be incredibly cheap in terms of developer hours, and delivered very quickly without the need for glacial consultation, the proposal usually falls flat because of risk: 'Who'll maintain the project tracker that hasn't had any maintenance for the past 7 years while you're on holiday for 2 weeks?' 'What if one of our systems changes and the connector breaks?' 'How can you guarantee it's secure/better/faster/cheaper/holier than Company X's?' With one developer behind these little projects, the answers are invariably: 'Nobody, but...' 'It will break, just like any other application would...' 'I, uh...' How can I better answer these questions and encourage people to take a little risk in order to stimulate creativity and fast-paced, short-lifecycle development instead of using that 6 months to consult about what tender process we might use?

  Read the article

• AI navigation around a 2d map - Avoiding obstacles.

  - by Curt Walker

  Hey there, I know my question seems pretty vague but I can't think of a better way to put it so I'll start off by explaining what I'm trying to do. I'm currently working on a project whereby I've been given a map and I'm coding a 'Critter' that should be able to navigate it's way around the map, the critter has various other functions but are not relevant to the current question. The whole program and solution is being written in C#. I can control the speed of the critter, and retrieve it's current location on the map by returning it's current X and Y position, I can also set it's direction when it collides with the terrain that blocks it. The only problem I have is that I can't think of a way to intelligently navigate my way around the map, so far I've been basing it around what direction the critter is facing when it collides with the terrain, and this is in no way a good way of moving around the map! I'm not a games programmer, and this is for a software assignment, so I have no clue on AI techniques. All I am after is a push in the right direction on how I could go about getting this critter to find it's way around any map given to me. Here's an image of the map and critters to give you an idea of what i'm talking about. Here's a link to an image of what the maps and critters look like. Map and Critter image I'm in no way looking for anyone to give me a full solution, just a push in the general direction on map navigation. Thanks in advance!

  Read the article

• Am I a discoverer of a bug in the WPF engine?

  - by bitbonk

  We have a MFC 8 application compiled with /CLR that contains a larger amount of Windows Forms UserControls wich again contain WPF user controls using ElementHost. Due to the architecture of our software we can not use HwndHost directly. We observed an extremely strange behavior here that we can not make any sense of: When the CPU load is very high during startup of the application and there are a lot live of ElementHost instances, the whole property engine completely stops working. For example animations that usually just work fine now never update the values of the bound properties, they just stay at some random value after startup. When I set a property that is not bound to anything the value is correctly stored in the dependency property (calling the getter returns the new value) but the visual representation never reflects that. I set the background to red but the background color does not change. We tested this on a lot of different machines all running Windows XP SP2 and it is pretty reproducible. The funny thing here is, that there is in fact one situation where the bound properties actually pickup a new value from the animation and the visual gets updated based on the property values. It is when I resize the ElementHost or when I hide and reshow the parent native control. As soon as I do this, properties that are bound to an animation pickup a new value and the visuals rerender based on the new property values - but just once - if I want to see another update I have to resize the ElementHost. Do you have any explanation of what could be happening here or how I could approach this problem to find it out? What can I do to debug this? Is there a way I can get more information about what WPF actually does or where WPF might have crashed? To me it currently seems like a bug in WPF itself since it only happens at high CPU load at startup.

  Read the article

• sharepoint custom aspx page with database connection

  - by Megini

  hi there i have created a custom aspx page whithin my sharepoint site with a sql server connection to a database on that server to select data when i view the page it works but when another user tries to view it it gives the following error : Server Error in '/' Application. Login failed for user 'GRINCOR\GuguK'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'GRINCOR\GuguK'. Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL: Add a "Debug=true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" % or: 2) Add the following section to the configuration file of your application: Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode. Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario. Stack Trace: [SqlException (0x80131904): Login failed for user 'GRINCOR\GuguK'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +248 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +245 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2811 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +53 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +327 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +2445370 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +2445224 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +354 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +703 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +54 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +2414776 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +92 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +1657 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +84 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +1645767 System.Data.SqlClient.SqlConnection.Open() +258 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa__233736835.DisplayData() in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:151 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa_233736835._RenderMain(HtmlTextWriter __w, Control parameterContainer) in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:346 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240 Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3601 can someone give me a solution to this problem ? i am using sharepoint services 3.0

  Read the article

• Requirements for connecting to Oracle with JDBC?

  - by Lord Torgamus

  I'm a newbie to Java-related web development, and I can't seem to get a simple program with JDBC working. I'm using off-the-shelf Oracle 10g XE and the Eclipse EE IDE. From the books and web pages I've checked so far, I've narrowed the problem down to either an incorrectly written database URL or a missing JAR file. I'm getting the following error: java.sql.SQLException: No suitable driver found for jdbc:oracle://127.0.0.1:8080 with the following code: import java.sql.*; public class DatabaseTestOne { public static void main(String[] args) { String url = "jdbc:oracle://127.0.0.1:8080"; String username = "HR"; String password = "samplepass"; String sql = "SELECT EMPLOYEE_ID FROM EMPLOYEES WHERE LAST_NAME='King'"; Connection connection; try { connection = DriverManager.getConnection(url, username, password); Statement statement = connection.createStatement(); System.out.println(statement.execute(sql)); connection.close(); } catch (SQLException e) { System.err.println(e); } } } What is the proper format for a database URL, anyways? They're mentioned a lot but I haven't been able to find a description. Thanks! EDIT (the answer): Based on duffymo's answer, I got ojdbc14.jar from http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_10201.html and dropped it in the Eclipse project's Referenced Libraries. Then I changed the start of the code to ... try { Class.forName("oracle.jdbc.driver.OracleDriver"); } catch (ClassNotFoundException e) { System.err.println(e); } // jdbc:oracle:thin:@<hostname>:<port>:<sid> String url = "jdbc:oracle:thin:@GalacticAC:1521:xe"; ... and it worked.

  Read the article

• c++ callback syntax in a class

  - by Mr Bell

  I am trying to figure out the syntax to register a callback with this 3rd party software. I think it is probably a basic question, I just am not too familiar with c++. They have a method for registering a callback function so their code can call a function in my code when an event happens. They provided a working example that registers the callback from the main file, but I want to know how to do it when working inside a class Their method signature: smHTRegisterHeadPoseCallback(smEngineHandle engine_handle, void *user_data, smHTHeadPoseCallback callback_fun); Working example from the main file: void STDCALL receiveHeadPose(void *,smEngineHeadPoseData head_pose, smCameraVideoFrame video_frame) { ... } void main() { ... smHTRegisterHeadPoseCallback(engine_handle,0,receiveHeadPose) ... } But I want to use this from my class MyClass.h class FaceEngine { public: void STDCALL receiveFaceData(void *, smEngineFaceData face_data, smCameraVideoFrame video_frame); ... MyClass.cpp void FaceEngine::Start(void) { rc = smHTRegisterFaceDataCallback(hFaceAPIEngine,0,&FaceEngine::receiveFaceData); ... Results in this compiler error: Error 1 error C2664: 'smHTRegisterFaceDataCallback' : cannot convert parameter 3 from 'void (__stdcall FaceEngine::* )(void *,smEngineFaceData,smCameraVideoFrame)' to 'smHTFaceDataCallback' d:\stuff\programming\visual studio 2008\projects\tut02_vertices\faceengine.cpp 43 Beard If my question isn't clear please let me know how I can clarify.

  Read the article

• JSON feed to Java Object

  - by mnml

  Hi, I would like to know if there is a webpage/software that can "translate" a Json feed object to a Java object with attributes. For example : { 'firstName': 'John', 'lastName': 'Smith', 'address': { 'streetAddress': '21 2nd Street', 'city': 'New York' } } Would become: class Person { private String firstName; private String lastName; private Address address; public String getFirstName() { return firstName; } public String getLastName() { return lastName; } public Address getAddress() { return address; } public void setFirstName(String firstName) { this.firstName = firstName; } public void setLastName(String lastName) { this.lastName = lastName; } public void setAddress(Address address) { this.address = address; } public String toString() { return String.format("firstName: %s, lastName: %s, address: [%s]", firstName, lastName, address); } } class Address { private String streetAddress; private String city; public String getStreetAddress() { return streetAddress; } public String getCity() { return city; } public void setStreetAddress(String streetAddress) { this.streetAddress = streetAddress; } public void setCity(String city) { this.city = city; } public String toString() { return String.format("streetAddress: %s, city: %s", streetAddress, city); } } I'm not asking that because I'm lazy, but the JSON I would like to parse has quite a lot of attribute.

  Read the article

• Detecting one point's location compared to two other points.

  - by WizardOfOdds

  Hi all, you can check my profile, this is not homework. I've got an interesting little problem to solve in a very real software and I'm looking for an easy way to solve it. I've got two fixed points on screen (they're fixed, but I don't know beforehand their position) that are not at the same location. These two fixed points form an imaginary line. Now I've got a third point that is "on one side" of that line (it cannot be on the line). The user can grab the point (the user actually grab an object, whose I track by its center, which is the point I'm interested in) and drag it. But it cannot "cross" the imaginary line. What is the easiest way to detect if the user is crossing the imaginary line? Example: a c / / (c cannot be dragged here) / b Or: c b -------------- a (c cannot be dragged here) So what is an easy to detect if c is staying on the correct "side" of the line (I draw segments here, but it really can be thought of as a line). One way to detect this is to take the destination point d and see if segment (c,d) intersects with line (a,b), but isn't there an easier way? Can't I just do some 2D dot-product magic here and have basically a one or two liner solving my issue?

  Read the article

< Previous Page | 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181  | Next Page >