Search Results

Search found 4141 results on 166 pages for 'router'.

Page 118/166 | < Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >

• Why subnet mask for IP 10.0.1.4 is 255.255.255.0?

  - by Rohit Kandhal

  Well I'm not sure whether I'm missing something here. But all I've read is that if first octet of IP is within 0 - 127 then it is categorized as Class A subnet and correspondingly Subnet Mask for this is 255.0.0.0 but when I connect my system to Apple airport then my system gets IP as 10.0.1.4 however subnet mask is 255.255.255.0 not 255.0.0.0. Please explain what I'm missing here. If there is something like for apple router subnet mask is calculated on some different flags then please let me know.

  Read the article

• How to access internet from 2 laptops with data card plugged-in in one of the machine?

  - by learnerforever

  Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

  Read the article

• How to access internet from 2 laptops with data card plugged-in in one of the machine?

  - by learnerforever

  Hi, I have 2 laptops - one running Windows XP and other running Vista. Both have wifi card.I have one Reliance broadband data card. I want to be able to access internet on both the machines simultaneously using this one data card. Please help. I think, there would be many many ways to do it. I do have some linksys router but any simple quick way without any extra hardware? like we could set up p2p or WLAN between these 2 machines, because both have wifi card so we shouldn't compulsorily need any extra hardware(?) I am fine with connecting data card to either of the machines. Thanks,

  Read the article

• Windows 7 Connection Sharing unable to access some sites

  - by Kristopher Ives

  I have a pretty sad networking situation that involves connecting to an open Wireless network and sharing that connection to an Ethernet that is plugged into a Linksys router. This has been done with XP and Windows 7, and it works great with XP. The problem with Windows 7 is that only some DNS will work. I don't know if it's been poisoned on the network above us (which we have no control over), but we've tried clearing the DNS cache as well as moving to using Google's DNS servers (8.8.8.8, 8.8.4.4). Here is a really quick list of sites that won't respond to DNS requests at all via dig, although if I get the IP address I can ping them: facebook.com yuilibrary.com twitter.com A lot of sites do work though. Anyone have an idea? It may be a subnet problem? If anyone wants more info let me know.

  Read the article

• Turnkeylinux lampp guest doesn't have internet connection

  - by dave08

  I've set up a turnkeylinux lampp server in virtualbox with two network bridged connections, one for when I'm plugged in to my router, and one for when I'm using a wireless connection. This allowed me to pull up the turnkey control panel on the host machine's browser, but when I try going into the command prompt in the guest and run an apt-get update, it doesn't seem to have an internet connection, even though it seems to have a connection with the host. What could be wrong? Thank you very much in advance for any answers...!

  Read the article

• Acer Aspire 7739G-6647 won't connect to the internet

  - by Nux

  Acer Aspire 7739G-6647, it belongs to a family member. I reinstalled the chipset, LAN drivers, ethernet controllers, etc. I'm positive it's not my router or modem or anything like that. I have other laptops running on the network, this one just has some strange issue. For some reason, it's saying "Work Offline" is enabled when I open Windows Media Player, and the PC seems to be connected to the network, but on the graphic in networking, it doesn't show the connection between the network and the internet. Could anyone try to state any possible reason for this issue? Any help is appreciated.

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• Freenas 8 email setup

  - by atrueresistance

  I'm struggling with setting up email reporting in Freenas. My build is FreeNAS-8.0.4-RELEASE-x64 (10351). I have my IPv4 Default gateway set to 192.168.2.1 (my router) and Nameserver 1 as 8.8.8.8 (google's public). Under my email tab I have from email ***@gmail.com outgoing mail server smtp.google.com port to connect to 465 tls/ssl SSL use smtp auth checked username ***@gmail.com password **** I then went into accounts and changed the root email to ***@gmail.com. When I try and send a test email, I get Your test email could not be sent: timed out So what am I doing wrong?

  Read the article

• How to set up server/domain name correctly in hosts file with HTTPS

  - by Byakugan

  I am trying to do local network and I am using these kind of types of network. 1) Main server which connects to internet with static IP 2) Second computer connected to first one locally with address like 192.168.0.2 - when I write this address to address line it is like i wrote localhost in original main server - so it should show my local web browser etc ... It has domain name this IP and connected router for it ... example www.domain.com so I added to my main server hosts file (linux powered) lines like these: 192.168.0.2 domain.com www.domain.com It was working ok when I entered my domain name in local computer it showed my site ... But after some time I added HTTPS cerfiticate and added this line to my apatche server: Redirect permanent / https://www.domain.com/ And now it does not work even when i add something like this to my hosts file: 192.168.0.2 https://www.domain.com So any idea how do do this thing work? Thank you.

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

• Windows Vista to Windows 7 Gbit LAN slow file copy

  - by ashgromnies

  I have two computers with gigabit LAN, one running Windows 7 and the other running Vista. I have a D-Link DIR-655 router, with gigabit LAN ports. I created a shared directory on the Vista computer, mapped it as a network drive on the Win 7 computer, and tried copying a 2 GB file... and it's going at 900 KB/s Yep... 900 kilobytes per second, about 7 Mb/s. Why so slow? Any ideas?

  Read the article

• Linux clients and Windows Servers can connect but not windows clients

  - by Mustafa Ismail Mustafa

  This is driving me insane because I can't make head or tails of it. We have two DCs (W2K3 SP1) and I'v tried this once on each machine as a sanity check. DHCP is being served by either one of the machines and all machines get an address no problem. The servers can connect/ping/browse to the www and so can all our linux clients. But NONE of our windows clients (all windows 7). I can do anything within the network, I can even ping the firewall/router but nothing from the windows clients is leaving the confines of our subnet. I don't get it. The linux and windows clients are both served from the same DHCP server, the gateway is the same, everything is the same. Anyone care to take a shot at how to resolve this? I tried adding explicit routes at the clients, but still no go. TIA SMIM

  Read the article

• my windows xp sp3 diagnostick:windows could not detect any wired or wireless network cards installed on your machine

  - by Yosef

  Problem: cant connect to internet with my new installation of windows xp sp3. Details: I have ubuntu in pc that worked with wired internet. i format all disk and install windows xp sp3. i have auto internet that defined in my router - other computers have internet. I run diagnoze of ie and get: windows could not detect any wired or wireless network cards installed on your machine In Device Manager i have only 1394 Adapter I dont see any internet adapters. Edit: I find with ubuntu livecd that i have hardware:82566dc gigabit network connection Thanks

  Read the article

• How can I speed up my Windows Server 2008 VPN Connection?

  - by Pure.Krome

  So I've installed VPN service that comes with Windows Server 2008. Works perfectly, etc. When a client remote desktops to one of the private servers at the office, via VPN .. it's pretty slow. Now - how long is a piece of string? So before I get all the obligatory checks, I'll list the things from Mr. Obvious: Our modem/router (fritz!box) has a data/graph that shows incoming and outbound bandwidth. Both directions are barely getting used when a client has RDP'd via VPN. Our office internet connection is running at 21,9 Mbit/s download 1,3 Mbit/s upload. I feel like it's maxing at .. modem speeds ?? Is there any tricks I can do to confirm this and possibly even fix this?

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• MikroTik ipv6 Tunnel

  - by MikeSmitty

  I've got a MikroTik router set up with the latest stable OS on it, and I just set up an ipv6 tunnel with Hurricane Electric, but I'm having an odd issue with it. I can't ping anything until I first ping the tunnel endpoint on HE's side. After that I can ping any ipv6 address fine, but give it a little time (say, maybe 30 sec) and I can't ping any ipv6 addresses again. Whenever it stops allowing ping to go through I notice the counter on my firewall rule that drops invalid connections goes up. this is my ipv6 firewall config: add action=accept chain=input comment="" connection-state=established \ disabled=no in-interface=sit1 add action=accept chain=input comment="" connection-state=related disabled=no \ in-interface=sit1 add action=accept chain=input comment="" disabled=no in-interface=bridge \ src-address=ipv6_address_here/64 add action=drop chain=input comment="" connection-state=invalid disabled=no \ in-interface=sit1 add action=drop chain=input comment="" disabled=no in-interface=sit1 Any ideas on what it could be?

  Read the article

• Two identical fiber optic broadband lines working as one

  - by Katafalkas

  I have been trying to find an answer to this, but all I can find is hobbyists trying to connect their Linksys devices to get some magic out of them. I am looking for a way I could combine two 100Mbit fiber optic lines into a single connection for our office. I assume it involves some Cisco learning or something similar. Do I need to configure some big router to load-balance the NATing in some way? I assume that many of you have done something similar and hope someone could share their knowledge or at least provide me some tips on how to do this.

  Read the article

• Slower than expected 802.11n wireless network speeds

  - by Ian

  I have two ASUS laptops running Windows 7 connected wirelessly via 802.11n at 150 Mbit, as reported by Task Manager. The router is Netgear WNDR3700. When testing the wireless connection speed using iperf, I'm not getting nearly 150 Mbit: C:\>iperf -c 10.0.0.123 -t 30 ------------------------------------------------------------ Client connecting to 10.0.0.123, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 10.0.0.116 port 53819 connected with 10.0.0.123 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-30.0 sec 41.2 MBytes 11.5 Mbits/sec That's a typical result. Running parallel client threads does not increase the overall total speed. Why would I only be getting 11.5 Mbit on a 150 Mbit connection?

  Read the article

• DNS resolution over DHCP

  - by Eric

  I have a m0n0wall router a VMWare workstation running ubuntu a windows 7 workstation running the VM The ubuntu hostname is "renraku" From the windows machine I can't resolve dns automatically for this host. For example, when I ping renraku Ping request could not find host renraku. Please check the name and try again. However nslookup seems to work nslookup renraku Server: m0n0wall.local Address: 192.168.123.254 Name: renraku Address: 192.168.123.248 I don't get how to have ping to work with hostnames. The main goal behind this is to have my web server to work with hostnames instead of ip addresses EDIT : ping 192.168.123.248 works

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• How to set up DHCP-configured access through a Linux box?

  - by marcusw

  I would like an old desktop box to use my laptop as a router to access the internet. Here is my setup: I have one ethernet port in the side of my laptop which I want to use to get internet access to my desktop computer. The laptop is connected to the LAN via a wireless link. Both systems run Linux. The desktop autoconfigures itself using DHCP. The laptop is a Kubuntu system. I do not have any crossover cables, though wireshark on the laptop sees the DHCP requests from the desktop just fine, so I doubt that I need one. What do I have to do to make this work?

  Read the article

• ICS as guest in Ubuntu 12.04 host

  - by oshirowanen

  I have installed Android as per this guide as a guess os via VirtualBox: http://www.android-x86.org/documents/virtualboxhowto Using the following ISO: android-x86-4.0-RC1-eeepc.iso But I am unable to connect to the internet from within the android virtual machine. The host OS is Ubuntu 12.04 where the internet works fine. I have internet access via a usb wireless connection to the home router. All this is fine. If I install Ubuntu 12.04 as a guest, where the host is also Ubuntu 12.04. The guest os'es internet works fine out of the box. But for some reason, I can't get the above androids internet to work out of the box as the guest os. Anyone know what I am doing wrong?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• How can I route packets from one application to a virtual machine in windows 7?

  - by user836045

  I am trying to test an application running in windows 7, and I would like to send the packets it generates to a server VM (I am using virtualbox) on the local machine which will act as a simulation for when packets will be really sent over the internet to a distant server. I need to check for correctness of the packets in certain situations. Is there a way on windows to take packets produced by an application and instead of passing it to my router, pass it along to another process, i.e. my virtual machine. I'd prefer not to change any of the code on my application and would rather find an outside solution. Is there such a solution for windows 7?

  Read the article

< Previous Page | 114 115 116 117 118 119 120 121 122 123 124 125  | Next Page >