Search Results

Search found 55134 results on 2206 pages for 'argument error'.

Page 1180/2206 | < Previous Page | 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187  | Next Page >

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• lsphp5 memcache extension installation problem

  - by mishu

  I am trying to recompile litespeed php with parameter '--enable-memcache' but getting an error: configure: WARNING: unrecognized options: --enable-memcache how to get it working?

  Read the article

• RHEL server Yum dependencies not working

  - by Tony

  I have a redhat server that isnt resolving dependencies correctly. I want to install httpd via yum "yum install httpd" and it installs correctly, but when i go to start httpd I get the following error: /sbin/service httpd restart Stopping httpd: [FAILED] Starting httpd: /usr/sbin/httpd: error while loading shared libraries: libaprutil-1.so.0: cannot open shared object file: No such file or directory [FAILED] It is missing the dependency for apr-util package. Weirdly the i386 package is installed and not the x86_64 package. Can anyone shed any light on why the dependencies might not be resolved correctly? ldd /usr/sbin/httpd libm.so.6 => /lib64/libm.so.6 (0x00002b02370db000) libpcre.so.0 => /lib64/libpcre.so.0 (0x00002b023735e000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00002b023757a000) libaprutil-1.so.0 => not found libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00002b0237793000) libldap-2.3.so.0 => /usr/lib64/libldap-2.3.so.0 (0x00002b02379cb000) liblber-2.3.so.0 => /usr/lib64/liblber-2.3.so.0 (0x00002b0237c06000) libdb-4.3.so => /lib64/libdb-4.3.so (0x00002b0237e14000) libexpat.so.0 => /lib64/libexpat.so.0 (0x00002b0238109000) libapr-1.so.0 => not found libpthread.so.0 => /lib64/libpthread.so.0 (0x00002b023832c000) libdl.so.2 => /lib64/libdl.so.2 (0x00002b0238547000) libc.so.6 => /lib64/libc.so.6 (0x00002b023874c000) libsepol.so.1 => /lib64/libsepol.so.1 (0x00002b0238aa3000) /lib64/ld-linux-x86-64.so.2 (0x00002b0236ebe000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00002b0238ce9000) libsasl2.so.2 => /usr/lib64/libsasl2.so.2 (0x00002b0238eff000) libssl.so.6 => /lib64/libssl.so.6 (0x00002b0239118000) libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002b0239364000) libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 (0x00002b02396b6000) libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002b02398e4000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002b0239b79000) libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 (0x00002b0239d7c000) libz.so.1 => /usr/lib64/libz.so.1 (0x00002b0239fa1000) libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x00002b023a1b5000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002b023a3be000) yet this is the i386 package apr-util-1.2.7-11.el5.i386 : Apache Portable Runtime Utility library Repo : installed Matched from: Filename : /usr/lib/libaprutil-1.so.0

  Read the article

• Colorize Monitoring of Logs

  - by Ian

  I sometimes monitor apache and php error logs using tail under FreeBSD. Is there any way to get colorized output, either using tail or some other command line app? Alternatively, what is your favorite way to monitor the various web-related logs in realtime?

  Read the article

• Is there a .NET 4.0 offline install?

  - by TrueWill

  I'm trying to install .NET 4.0 on some VMs using dotNetFx40_Full_setup.exe and am getting error 0x800C0005. The issue likely involves the firewall/proxy/security configuration. Rather than dealing with that, does Microsoft have an offline install available yet? I've searched but not found one.

  Read the article

• Creating DOS bootable cd

  - by dotnetdev

  I need to burn a cd which I will boot from to reset a password on Windows Server. I am using Active Password Changer, but I get an error like so: http://www.freeimagehosting.net/image.php?faa4737491.png How can I create a "DOS bootable disk"? I have an ISO on the cd I thought that will work. The manual says I need DOS system files, where do I get these from? Thanks

  Read the article

• Install VMWare workstation 7 on windows 7

  - by maloo

  Hi, when i run the installer on my windows 7 machine i get the error: "bootstrap.lua was not found". It works on windows vista. Any ideas what causes this? Thanks.

  Read the article

• Apache Forbidden: httpd.conf or File Permissions

  - by Alan Storm

  When setting up an Apache virtual host, I'll occasionally get the following error when attempting to access the site. Forbidden You don't have permission to access / on this server. Is there any method to (or tool that will) tell me why Apache is denying access? (local rule in httpd.conf, file permissions, etc. I'm not looking for help with a specific configuration, instead I'm looking for a way to have the computer tell me what's wrong with my system and/or configuration.

  Read the article

• Why does the MSDN library constantly say "Information Not Found"?

  - by Zian Choy

  Environment: VS 2008 Pro SP1 MSDN Library for VS2008SP1 Sample Code: Dim userDataset = New DataSet Dim myDataAdapter = New SqlDataAdapter("SELECT UserName FROM tblwebUsers WHERE name = @person", connect) myDataAdapter.SelectCommand.Parameters.Add("@person", SqlDbType.NVarChar) When I put my cursor on the "d" in "Add" and press F1, I get an "Information Not Found" error from the MSDN Library. Does anyone have any suggestions for addressing the issue?

  Read the article

• Unable to view data in notepad.

  - by Saran

  I have a java code that reads an excel file and writes it to a text file. When i get the output text file, I can see only symbols like this in the notepad. "????????????????????????????" But if i open the text file in wordpad or ms-word, the data is correctly displayed. What could be the error?

  Read the article

• Restart mysql keeping the data

  - by sitonico

  Hi all, I'm quite new using mysql, so let me know if I'm missing something. I took some holidays, and when I got back to work and I tried to log in phpmyadmin I got a ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I never had this problem, so I was browsing to look for a solution. I tried some things, and I'm afraid I touched too much. I couldn't solve the problem, and the I realized that I had some actualizations to be done, and I thought that they may be helpful for mysql. Then I also realized that when I was doing this actualizations first day, they stopped because I had a lack of space, so I restarted then. Then,when the system was configuring mysql, it didn't advance. I waited for a long time and then I just stopped it and restarted the computer. After it, I just tried to uninstall mysql with sudo apt-get remove mysql-server-5.1, and install it again, but it didn't work. Now I have 2 questions: What do you think it is happening? Should I remove mysql completely? What should I do? I'm afraid of losing my databases, is there anyway to recover the data? Thank you very much in advance. -----------EDIT------- These are the messages: alfonso@alfonso-laptop:/$ tail -F /var/log/syslog | grep Feb 15 15:08:01 alfonso-laptop init: mysql post-start process (15192) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process (15263) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process ended, Feb 15 15:08:31 alfonso-laptop init: mysql post-start process (15264) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process (15358) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process ended, Feb 15 15:09:01 alfonso-laptop init: mysql post-start process (15359) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process (15447) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process ended, Feb 15 15:09:32 alfonso-laptop init: mysql post-start process (15448) terminated with status 1 This is the content of error.log-old 110128 13:17:20 [Note] /usr/sbin/mysqld: Normal shutdown 110128 13:17:20 [Note] Event Scheduler: Purging the queue. 0 events 110128 13:17:20 InnoDB: Starting shutdown... 110128 13:17:22 InnoDB: Shutdown completed; log sequence number 0 590872 110128 13:17:22 [Note] /usr/sbin/mysqld: Shutdown complete 110214 2:08:18 [Note] Plugin 'FEDERATED' is disabled. 110214 2:08:19 InnoDB: Started; log sequence number 0 590872 110214 2:08:19 [Note] Event Scheduler: Loaded 0 events 110214 2:08:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.41-3ubuntu12.8' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu)

  Read the article

• Centos does not open port/s after the rule/s are appended

  - by Charlie Dyason

  So after some battling and struggling with the firewall, i see that I may be doing something or the firewall isnt responding correctly there is has a port filter that is blocking certain ports. by the way, I have combed the internet, posted on forums, done almost everything and now hence the website name "serverfault", is my last resort, I need help What I hoped to achieve is create a pptp server to connect to with windows/linux clients UPDATED @ bottom Okay, here is what I did: I made some changes to my iptables file, giving me endless issues and so I restored the iptables.old file contents of iptables.old: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT after iptables.old restore(back to stock), nmap scan shows: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:54 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 997 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.95 seconds if I append rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 13:58 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.77 seconds *notice it allows and opens port 443 but no other ports, and it removes port 113...? removing previous rule and if I append rule: (allow and open port 80 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:01 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.014s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.12 seconds *notice it removes port 443 and allows 80 but is closed without removing previous rule and if I append rule: (allow and open port 1723 incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:05 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 996 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http 113/tcp closed ident 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 5.16 seconds *notice no change in ports opened or closed??? after removing rules: iptables -A INPUT -i eth0 -m tcp -p tcp --dport 80 -j ACCEPT iptables -A INPUT -i eth0 -m tcp -p tcp --dport 1723 -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.015s latency). Not shown: 998 filtered ports PORT STATE SERVICE 22/tcp open ssh 113/tcp closed ident Nmap done: 1 IP address (1 host up) scanned in 5.15 seconds and returning rule: (to accept all tcp ports incoming to server on interface eth0) iptables -A INPUT -i eth0 -m tcp -j ACCEPT nmap output: nmap [server ip] Starting Nmap 6.00 ( nmap.org ) at 2013-11-01 14:07 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 3.87 seconds notice the eth0 changes the 999 filtered ports to 858 filtered ports, 139 closed ports QUESTION: why cant I allow and/or open a specific port, eg. I want to allow and open port 443, it doesnt allow it, or even 1723 for pptp, why am I not able to??? sorry for the layout, the editor was give issues (aswell... sigh) UPDATE @Madhatter comment #1 thank you madhatter in my iptables file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT # ----------all rules mentioned in post where added here ONLY!!!---------- -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT if I want to allow and open port 1723 (or edit iptables to allow a pptp connection from remote pc), what changes would I make? (please bear with me, my first time working with servers, etc.) Update MadHatter comment #2 iptables -L -n -v --line-numbers Chain INPUT (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 9 660 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 3 0 0 ACCEPT all -- eth0 * 0.0.0.0/0 0.0.0.0/0 4 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 6 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT 6 packets, 840 bytes) num pkts bytes target prot opt in out source destination just on a personal note, madhatter, thank you for the support , I really appreciate it! UPDATE MadHatter comment #3 here are the interfaces ifconfig eth0 Link encap:Ethernet HWaddr 00:1D:D8:B7:1F:DC inet addr:[server ip] Bcast:[server ip x.x.x].255 Mask:255.255.255.0 inet6 addr: fe80::21d:d8ff:feb7:1fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36692 errors:0 dropped:0 overruns:0 frame:0 TX packets:4247 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2830372 (2.6 MiB) TX bytes:427976 (417.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) remote nmap nmap -p 1723 [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-11-01 16:17 SAST Nmap scan report for server.address.net ([server ip]) Host is up (0.017s latency). PORT STATE SERVICE 1723/tcp filtered pptp Nmap done: 1 IP address (1 host up) scanned in 0.51 seconds local nmap nmap -p 1723 localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-01 16:19 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000058s latency). Other addresses for localhost (not scanned): 127.0.0.1 PORT STATE SERVICE 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.11 seconds UPDATE MadHatter COMMENT POST #4 I apologize, if there might have been any confusion, i did have the rule appended: (only after 3rd post) iptables -A INPUT -p tcp --dport 1723 -j ACCEPT netstat -apn|grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1142/pptpd There are not VPN's and firewalls between the server and "me" UPDATE MadHatter comment #5 So here is an intersting turn of events: I booted into windows 7, created a vpn connection, went through the verfication username & pword - checking the sstp then checking pptp (went through that very quickly which meeans there is no problem), but on teh verfication of username and pword (before registering pc on network), it got stuck, gave this error Connection failed with error 2147943625 The remote computer refused the network connection netstat -apn | grep -w 1723 before connecting: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd after the error came tried again: netstat -apn |grep -w 1723 tcp 0 0 0.0.0.0:1723 0.0.0.0:* LISTEN 1137/pptpd tcp 0 0 41.185.26.238:1723 41.13.212.47:49607 TIME_WAIT - I do not know what it means but seems like there is progress..., any thoughts???

  Read the article

• sqlite3 support on centos with PECL?

  - by shadow_of__soul

  i just realized that the rpm version of php that i have installed on the server don't have sqlite support (well it have the PDO support but for some reason don't work) so i installed as a PECL extension, and now it show the support on the phpinfo() but still the open inviter script give me the error of: Call to undefined function sqlite_open() and i already restarted httpd also any hint where i can find a solution or guide?

  Read the article

• Pidgin To Shoretel Call Manager IM

  - by ocatenac

  Is anyone out there using Pidgin to connect with Shoretel's Instant Messaging? Shoretel 9.2. According to one of the docs I found on Shoretel's website, it should be connecting as a SIMPLE client but so far no dice. It keeps getting an error resolving the server. There's no proxy involved that I know of. I was just wondering if anyone else had this particular configuration and if they'd made it work correctly.

  Read the article

• XP Pro SP3: DRIVER_IRQL_NOT_LESS_OR_EQUAL on hibernate

  - by Margaret

  Hey all I'm running XP Pro SP3 on a Late 2007-era 2.2Ghz Macbook. Unfortunately, it's recently started giving me a Blue Screen of Death when I try to hibernate it. It gives me the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL", and at the bottom says that it's in "hiber_atapi.sys". Most of the Googling I've done thus far turns up things referring to Windows Server 2003, which is obviously less than useful. Anyone know any way to fix this short of a full re-install?

  Read the article

• avconv - not working with movflags

  - by MarKa

  With the Parameter "-movflags frag_custom" my avconv says [mp4 muxer @ 0x8d05f60] [Eval @ 0x7fffcc763f00] Undefined constant or missing '(' in 'frag_custom' [mp4 muxer @ 0x8d05f60] Unable to parse option value "frag_custom" [mp4 muxer @ 0x8d05f60] Error setting option movflags to value frag_custom. But with avconv is compiled with a mp4 muxer, so whats the problem ? Version is avconv 0.8.1-4:0.8.1-0ubuntu1

  Read the article

• Unable to open an ra_local session to URL

  - by AntonAL

  I have repository on my Windows machine, using VisualSVN + TortoiseSVN I want to use this repositories on my Mac with Versions.app I create a new Repository bookmark, choose a repository directory and after clicking "Create", get following error: Unable to open an ra_local session to URL Unable to open repository 'file://localhost/Path/to/my/repositories/MyRepo' Expected FS format '2'; found format '4' I can surf through the repository, using svn ls file://localhost/Path/to/my/repositories/MyRepo Also, when i create local repository, using Versions.app, the bookmark is created well and i can work with it Help!

  Read the article

• Spring MVC configuration problems

  - by Smek

  i have some problems with configuring Spring MVC. I made a maven multi module project with the following modules: /api /domain /repositories /webapp I like to share the domain and the repositories between the api and the webapp (both web projects). First i want to configure the webapp to use the repositories module so i added the dependencies in the xml file like this: <dependency> <groupId>${project.groupId}</groupId> <artifactId>domain</artifactId> <version>1.0-SNAPSHOT</version> </dependency> <dependency> <groupId>${project.groupId}</groupId> <artifactId>repositories</artifactId> <version>1.0-SNAPSHOT</version> </dependency> And my controller in the webapp module looks like this: package com.mywebapp.webapp; import com.mywebapp.domain.Person; import com.mywebapp.repositories.services.PersonService; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; import org.springframework.stereotype.Controller; import org.springframework.ui.ModelMap; import org.springframework.web.bind.annotation.RequestMapping; import org.springframework.web.bind.annotation.RequestMethod; @Controller @RequestMapping("/") @Configuration @ComponentScan("com.mywebapp.repositories") public class PersonController { @Autowired PersonService personservice; @RequestMapping(method = RequestMethod.GET) public String printWelcome(ModelMap model) { Person p = new Person(); p.age = 23; p.firstName = "John"; p.lastName = "Doe"; personservice.createNewPerson(p); model.addAttribute("message", "Hello world!"); return "index"; } } In my webapp module i try to load configuration files in my web.xml like this: <context-param> <param-name>contextConfigLocation</param-name> <param-value>classpath:/META-INF/persistence-context.xml, classpath:/META-INF/service-context.xml</param-value> </context-param> These files cannot be found so i get the following error: org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [META-INF/persistence-context.xml]; nested exception is java.io.FileNotFoundException: class path resource [META-INF/persistence-context.xml] cannot be opened because it does not exist These files are in the repositories module so my first question is how can i make Spring to find these files? I also have trouble Autowiring the PersonService to my Controller class did i forget to configure something in my XML? Here is the error message: [INFO] [talledLocalContainer] SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener [INFO] [talledLocalContainer] org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'personServiceImpl': Injection of autowired dependencies failed; nested exception is org.springframework.beans.factory.BeanCreationException: Could not autowire field: private com.mywebapp.repositories.repository.PersonRepository com.mywebapp.repositories.services.PersonServiceImpl.personRepository; nested exception is org.springframework.beans.factory.NoSuchBeanDefinitionException: No matching bean of type [com.mywebapp.repositories.repository.PersonRepository] found for dependency: expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {@org.springframework.beans.factory.annotation.Autowired(required=true)} PersonServiceImple.java: package com.mywebapp.repositories.services; import com.mywebapp.domain.Person; import com.mywebapp.repositories.repository.PersonRepository; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.data.mongodb.core.MongoTemplate; import org.springframework.stereotype.Service; @Service public class PersonServiceImpl implements PersonService{ @Autowired public PersonRepository personRepository; @Autowired public MongoTemplate personTemplate; @Override public Person createNewPerson(Person person) { return personRepository.save(person); } } PersonService.java package com.mywebapp.repositories.services; import com.mywebapp.domain.Person; public interface PersonService { Person createNewPerson(Person person); } PersonRepository.java: package com.mywebapp.repositories.repository; import com.mywebapp.domain.Person; import org.springframework.data.mongodb.repository.MongoRepository; import org.springframework.stereotype.Repository; import java.math.BigInteger; @Repository public interface PersonRepository extends MongoRepository<Person, BigInteger> { } persistance-context.xml <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:context="http://www.springframework.org/schema/context" xmlns:mongo="http://www.springframework.org/schema/data/mongo" xsi:schemaLocation= "http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd http://www.springframework.org/schema/data/mongo http://www.springframework.org/schema/data/mongo/spring-mongo-1.0.xsd http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd"> <context:property-placeholder location="classpath:mongo.properties"/> <mongo:mongo host="${mongo.host}" port="${mongo.port}" id="mongo"> <mongo:options connections-per-host="${mongo.connectionsPerHost}" threads-allowed-to-block-for-connection-multiplier="${mongo.threadsAllowedToBlockForConnectionMultiplier}" connect-timeout="${mongo.connectTimeout}" max-wait-time="${mongo.maxWaitTime}" auto-connect-retry="${mongo.autoConnectRetry}" socket-keep-alive="${mongo.socketKeepAlive}" socket-timeout="${mongo.socketTimeout}" slave-ok="${mongo.slaveOk}" write-number="1" write-timeout="0" write-fsync="true"/> </mongo:mongo> <mongo:db-factory dbname="person" mongo-ref="mongo" id="mongoDbFactory"/> <bean id="personTemplate" name="personTemplate" class="org.springframework.data.mongodb.core.MongoTemplate"> <constructor-arg name="mongoDbFactory" ref="mongoDbFactory"/> </bean> <mongo:repositories base-package="com.mywebapp.repositories.repository" mongo-template-ref="personTemplate"> <mongo:repository id="personRepository" repository-impl-postfix="PersonRepository" mongo-template-ref="personTemplate" create-query-indexes="true"/> </mongo:repositories> Thanks

  Read the article

• How do you fix the command-not-found issue on Ubuntu 10.04?

  - by Thierry Lam

  I type some command which does not exist at the terminal and I get: $ asd /usr/bin/python: can't find '__main__.py' in '/usr/share/command-not-found' How do I fix the above to display the correct error message? The Ubuntu version I'm using is 10.04, 2.6.32-22

  Read the article

• Using Chinese Characters With Mod_Rewrite

  - by Moak

  I'm trying to create a rule using Chinese characters #RewriteRule ^zh(.*) /???$1 [L,R=301] creates error 500 when i change the file to UTF-8 #RewriteRule ^zh(.*) /%E4%B8%AD%E6%96%87%E7%89%88$1 [L,R=301] redirects to /%25E4%25B8%25AD%25E6%2596%2587%25E7%2589%2588 (basically replacing % with %25) Anybody familiar with this problem?

  Read the article

• Copying files with SSH

  - by Deniz Zoeteman

  I am trying to copy a file from my other computer, to another computer. (both running Ubuntu 9.10) So say: I've ssh'ed into the other computer; i 'cd' to the directory; and i entered cp File.zip /home/me/Desktop as file.zip is located in the directory i just used cd with. Now, it gives me the following error message: cannot create regular file '/home/me/Desktop': no such file or directory What do i have to do?

  Read the article

• Bash if statement equal output from last command

  - by mYzk

  I am trying to equal something from last command with bash if statement: #!/bin/bash monit status if [ "status" != "error" ]; then echo -e "hostname\ttest\t0\t0" | /usr/sbin/send_nsca -H hostname -c /etc/send_nsca.cfg exit 1; fi Even if the monit status gives out status = online with all services it runs the echo command. I can not figure out how to make the if statement match the status of monit status output.

  Read the article

• nginx crashes on ssl after about a minute

  - by Scott

  Here are my configuration files ssl.conf # HTTPS server # server { listen 443 ssl; server_name api.domain.com; error_log /var/log/nginx/api.error.log; location / { root /var/www/api.domain.com; index index.html index.php index.php; try_files $uri $uri/ /index.php?$args; } ssl on; ssl_certificate /etc/nginx/api.domain.com.crt; ssl_certificate_key /etc/nginx/api.domain.com.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5; ssl_prefer_server_ciphers on; # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { # root html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_param SCRIPT_FILENAME /var/www/api.domain.com$fastcgi_script_name; fastcgi_param HTTPS on; include fastcgi_params; } location ~ /\.ht { deny all; } } nginx.conf user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; gzip on; include /etc/nginx/conf.d/*.conf; } I have a server running on port 80 that runs with no issues. As soon as I turn on this api server running on ssl, it works for about a minute and then crashes and gives a 504 Gateway Time-out. Running nginx/1.2.3

  Read the article

• DNS Problems (NIGHTMARES!) with BIND and Virtualmin

  - by Nyxynyx

  I have a webserver (Ubuntu 12.04 with LAMP) using Virtualmin / Webmin. Because I just moved from a Cpanel system, I am having a nightmare configuring the DNS! Using intoDNS.com, the failed reports are: Mismatched NS records WARNING: One or more of your nameservers did not return any of your NS records. DNS servers responded ERROR: One or more of your nameservers did not respond: The ones that did not respond are: 123.123.123.123 213.251.188.141x Multiple Nameservers ERROR: Looks like you have less than 2 nameservers. According to RFC2182 section 5 you must have at least 3 nameservers, and no more than 7. Having 2 nameservers is also ok by me. Missing nameservers reported by your nameserver You should already know that your NS records at your nameservers are missing, so here it is again: ns1.mydomain.com. sdns2.ovh.net. SOA record No valid SOA record came back! MX Records WWW A Record ERROR: I could not get any A records for www.mydomain.com! Step-by-Step of my Attempt In my domain registrar (Namecheap), I registered ns1.mydomain.com as a nameserver, pointing to the IP address of my web server which is running bind9. The domain is setup with DNS ns1.mydomain.com and sdns2.ovh.net. sdns2.ovh.net is a secondary DNS server (SLAVE and pointing mydomain.com to the IP address of my web server) Webserver domain: mydomain.com Webserver hostname: ns4000000.ip-123-123-123.net Webserver IP: 123.123.123.123 Under Virtualmin, I edited the default Virtual server template, BIND DNS records for new domains: ns1.mydomain.com Master DNS server hostname: ns1.mydomain.com Next I created a Virtual server using that server template. This is what I've done but its still not working! Any ideas? I've been stuck for days, thank you for all your help! service bind9 status * bind9 is running lsof -i :53 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME named 6966 bind 20u IPv6 338583 0t0 TCP *:domain (LISTEN) named 6966 bind 21u IPv4 338588 0t0 TCP localhost.localdomain:domain (LISTEN) named 6966 bind 22u IPv4 338590 0t0 TCP ns4000000.ip-123-123-123.net:domain (LISTEN) named 6966 bind 512u IPv6 338582 0t0 UDP *:domain named 6966 bind 513u IPv4 338587 0t0 UDP localhost.localdomain:domain named 6966 bind 514u IPv4 338589 0t0 UDP ns4000000.ip-123-123-123.net:domain /etc/resolv.con (Not sure how 213.186.33.99 got here) nameserver 127.0.0.1 nameserver 213.186.33.99 search ovh.net host 123.123.123.123 (my web server's IP) 13.60.245.198.in-addr.arpa domain name pointer ns4000000.ip-123-123-123.net. nslookup 213.186.33.99 Server: 127.0.0.1 Address: 127.0.0.1#53 Non-authoritative answer: 99.33.186.213.in-addr.arpa name = cdns.ovh.net. Authoritative answers can be found from: 33.186.213.in-addr.arpa nameserver = ns.ovh.net. 33.186.213.in-addr.arpa nameserver = dns.ovh.net. nslookup ns1.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup ns2.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached nslookup www.mydomain.com ;; Got SERVFAIL reply from 127.0.0.1, trying next server ;; connection timed out; no servers could be reached dig mydomain.com ; <<>> DiG 9.8.1-P1 <<>> mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 43540 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:09 2012 ;; MSG SIZE rcvd: 30 dig ns1.mydomain.com ; <<>> DiG 9.8.1-P1 <<>> ns1.mydomain.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 31254 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ns1.mydomain.com. IN A ;; Query time: 0 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Thu Oct 11 11:30:16 2012 ;; MSG SIZE rcvd: 34 /etc/bind/named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; /etc/bind/named.conf.default-zones zone "." { type hint; file "/etc/bind/db.root"; }; zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; /etc/bind/named.conf.local zone "mydomain.com" { type master; file "/var/lib/bind/mydomain.com.hosts"; allow-transfer { 127.0.0.1; localnets; }; }; /etc/bind/named.conf.options options { directory "/var/cache/bind"; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; // allow-recursion { 127.0.0.1; }; // transfer-source; }; named-checkconf -z dns_master_load: /var/lib/bind/mydomain.com.hosts:21: unexpected end of line dns_master_load: /var/lib/bind/mydomain.com.hosts:20: unexpected end of input /var/lib/bind/mydomain.com.hosts: file does not end with newline zone mydomain.com/IN: loading from master file /var/lib/bind/mydomain.com.hosts failed: unexpected end of input zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: unexpected end of input zone localhost/IN: loaded serial 2 zone 127.in-addr.arpa/IN: loaded serial 1 zone 0.in-addr.arpa/IN: loaded serial 1 zone 255.in-addr.arpa/IN: loaded serial 1 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:http ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:submission ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• broken apache .htaccess (mod_rewrite)

  - by Tim

  Hey there, I'm running into an apache mod_rewrite configuration issue on one of our machines. Has anyone encountered / overcome anyone of these issues. URL1 ( http://www.uppereast.com ) is not being redirected to URL2 ( http://www.nyclocalliving.com ). This definitely worked in my test environment where a localhost address was rewritten to URL2 ( RewriteRule ^http://upe.localhost$ http://www.nyclocalliving.com ). I'm trying to get the all of the redirect rules working ( 2200 + ), but the 'http://www.nyclocalliving.com' site encounters a server error if I use more that 1000 or more rules. A) .htaccess file - I've tried the simplest approach which worked in a local environment 75 # Various rewrite rules. 76 <IfModule mod_rewrite.c> 77 RewriteEngine on 78 79 # BEGIN new URL Mapping rules 80 #RewriteRule ^http://www.uppereast.com/$ http://www.nyclocalliving.com ... 2307 #RewriteRule ^http://www.uppereast.com/zipcodechange.html$ http://www.nyclocalliving.com/zip-code-change fig. 1 B) /var/log/httpd/error_log file - there are these seg. fault errors when I enable the first rule ( line 80 ). no error logs otherwise. 1893 [Fri Sep 25 17:53:46 2009] [notice] Digest: generating secret for digest authentication ... 1894 [Fri Sep 25 17:53:46 2009] [notice] Digest: done 1895 [Fri Sep 25 17:53:46 2009] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations 1896 [Fri Sep 25 17:53:47 2009] [notice] child pid 29774 exit signal Segmentation fault (11) 1897 [Fri Sep 25 17:53:47 2009] [notice] child pid 29775 exit signal Segmentation fault (11) 1898 [Fri Sep 25 17:53:47 2009] [notice] child pid 29776 exit signal Segmentation fault (11) 1899 [Fri Sep 25 17:53:47 2009] [notice] child pid 29777 exit signal Segmentation fault (11) 1900 [Fri Sep 25 17:53:47 2009] [notice] child pid 29778 exit signal Segmentation fault (11) 1901 [Fri Sep 25 17:53:47 2009] [notice] child pid 29779 exit signal Segmentation fault (11) fig. 2 C) Some more debug information from the shell; the mod_rewrite is turned on and this is the machine architecture 1 # apachectl -t -D DUMP_MODULES | more 2 Loaded Modules: 3 core_module (static) 4 ... 5 rewrite_module (shared) 1 # uname -a 2 Linux RegionalWeb 2.6.24-23-xen #1 SMP Mon Jan 26 03:09:12 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux fig. 3 I looked into some previous posts (http://serverfault.com/questions/18744/htaccess-not-working-modrewrite), but didn't find a solution for this. I'm sure there's a small switch somewhere that I'm missing. Thanks in advance Tim

  Read the article

< Previous Page | 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187  | Next Page >