Search Results

Search found 86974 results on 3479 pages for 'visualsvn server'.

Page 1186/3479 | < Previous Page | 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193  | Next Page >

• Failover of mirrored webservice

  - by eflat

  We are using a webservice (over http) which has 2 mirrored servers, accessible as, say www.blah.com and www2.blah.com. Is there a software solution that would help us handle failover? Currently if one server becomes unavailable, I need to manually edit our config to point at the other server. Failover on their side is "in the works", so I don't want to do checking for server availability in code. On our side, we use a mix of linux and windows boxes, so we have both os's in the cage.

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Get OpenVPN clients names to resolve through dnsmasq

  - by Fake Name

  I have a PFSense box running as an OpenVPN server. There are several remote devices that connect through the VPN (as tap devices). The VPN stuff is working, I can access the remote hardware by looking up the IP assigned to each device on the PFSense router. What I'd like is to have it so I can resolve the remote hardware addresses via DNS while on the local network. Note that this is only local-network - remote-device (they're backup boxes). I don't need to have the remote devices resolve using the local DNS forwarding agent. I have the rest of the devices on the network that need to be accessible via DNS report their name during the DHCP process. However, the IP assignment for OpenVPN tap clients, while it is dynamic (which is why I need DNS), does not seem to use the local DHCP server. How can I have my openvpn server add information for it's clients to the dnsmask resolver? Is this setup even reasonable (I'm not familiar with openVPN at all)?

  Read the article

• Copy an Amazon EC2 Instance to use locally

  - by Excolo

  Ok, so we have a spare server I have installed Debian Wheezy on, and setup Xen on for virtual machines. It has better performance than all our ec2 instances combined, and will cost less to run (for a few various reasons) I would like to get the EC2 instances downloaded to my server, and converted to run for Xen, but im having difficulty finding anything specific. I did not setup the EC2 instances myself, and am not very familiar with them. Everything I have found (which isnt much) just says "Do XYZ" and I have no idea how to do those. So being as specific as possible would be helpful. Also, confusingly I see people writing in forums saying you can only export linux images (which mine are, Ubuntu images) but then I see on amazons export tool saying you can only export Windows server? Am I missing something here? Is that not the right place to be looking? Thanks

  Read the article

• xenserver: xe command never returns?

  - by ethrbunny

  I'm trying to port a xen server 6.2 pool to a new IP address range. I've got three servers total: 2 currently at their new IP but no longer in the pool and one remaining. I'm trying to set IP address information on the two disconnected ones using the xe command and all of its variants. Oddly enough, it never returns with any values. xe host-list It just sits there until I ctrl-c it. The server is still awake and responding though. I can enter other commands (EG ifconfig) and they work fine. If I enter this same command on the remaining server in the pool it works ok. I've tried restarting the toolstack and even rebooting. No change. What am I doing wrong?

  Read the article

• who delete my files?

  - by akalter

  I have some linux server. on two of our server we have mysql. we have daily backup on both machine. but the script different. i saw both scripts. on one of them i saw the "delete older files" algorithm, but in the other this is happening but not from the script. i trying to know who dletes my files, because of that i want to use same script on both machine because of that in the script with the deletion i also copy the files to the another server, and i want to do that in both servers. Who have an idea who delete my older backups? Thank you!

  Read the article

• Web application access different between Domain Name and IP

  - by h82

  in our office, we have a web application running. When we access the application by the domain name, http://server.domain.com/application/name it will display the current version of application. However, when we go by the IP address, http://192.168.1.111/application/name it will display the old version of that application. One thing is that we can access that application either by http://server.domain.com/ (it will be redirected to the long URL automatically) or http://server.domain.com/application/name when we are using domain name. But only accessible via the exact URL when we use IP address. Why is it showing the old version and how can it be corrected? It is running JRun4, Apache on Red hat. I've checked in httpd.conf a bit but could not find any. Please advice what should be done to display the same (updated version) when we access using domain name or IP address. Thank you.

  Read the article

• Is virtual machine slower than the underlying physical machine?

  - by Michal Illich

  This question is quite general, but most specifically I'm interested in knowing if virtual machine running Ubuntu Enterprise Cloud will be any slower than the same physical machine without any virtualization. How much (1%, 5%, 10%)? Did anyone measure performance difference of web server or db server (virtual VS physical)? If it depends on configuration, let's imagine two quad core processors, 12 GB of memory and a bunch of SSD disks, running 64-bit ubuntu enterprise server. On top of that, just 1 virtual machine allowed to use all resources available.

  Read the article

• What are possible reasons why a calendar entry in OWA is at a different time than in Outlook?

  - by Ken Pespisa

  We have two Exchange 2003 servers, our primary server and a front-end server that hosts Outlook Web Access (OWA). When I open my boss' calendar via Outlook 2007 (from my Outlook client as well as hers) I see the event scheduled for 10:30 am. When I open her calendar via Outlook Web Access, the same event is scheduled for 4:30 am. I don't understand Exchange well-enough to imagine how this is possible. If you have any ideas why this could be happening, I greatly appreciate it. I'd also very much appreciate any insight you have to how this could be possible. There must be some cached data on the front-end server that causes the calendar entry to appear at a different time, I suppose. Any insight into how Exchange manages that cache and where I could look for an issue would be very helpful. Thank you!

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• Random TCP Resets

  - by allenwei

  We got randomly TCP "reset" error when we send request to remote server. Log from remote server Cisco TCP Connection Terminated,Nov 05 14:43:39 EST: %ASA-session-6-302014: Teardown TCP connection 640068283 for Outside:xxxx to xxxx duration 0:00:00 bytes 4160 TCP Reset-O One my local machine I saw when I use netstat 100703 connections reset due to unexpected data 324186 connections reset due to early user close I also use tcpdump to see what's wrong with it, I saw xxxx.https: Flags [R.], seq 290, ack 1369, win 136, options [nop,nop,TS val 2871790533 ecr 1897173283], length 0 The problem just happened today, we didn't change anything on our server. Anyone know what's wrong with it? Is it related to code we wrote send out request or related to linux configuration?

  Read the article

• close ssh sessions

  - by egor7

  I'm using ~/.ssh/config for logging to the internal.local corporate server: Host internal.local ProxyCommand ssh -e none corporate.proxy nc %h %p But after closing session (typing exit), my sshd session on server stays still active (I see it through different connection). Hot do I close session or change my config in the appropriate way, to eleminate hang sessions? First check from the second, root session: ps -fu user_name user_name 861 855 0 16:58:16 pts/3 0:00 -bash user_name 855 854 0 16:58:13 ? 0:00 /usr/lib/ssh/sshd After logging out: user_name 855 854 0 16:58:13 ? 0:00 /usr/lib/ssh/sshd Just after scp files to/from the internal.local a new scp sessions still hangs on the server.

  Read the article

• Mount a remote Linux hard drive as another Windows 7 partition during boot?

  - by zhuanyi

  I would like to mount a hard drive on a remote computer (running on CentOS 6) as a Windows drive so that I can install programs to that drive. The primary hard drive for my Windows machine (which is at home) is pretty small, I have a Linux server sitting in a remote data center with a much larger hard drive and allow me to install more stuff. I know most of you are going to say Samba, unfortunately the biggest problem for me in this case is that I can not mount Samba as a network share unless I start OpenVPN or SSH tunneling first, which is not good for my case because I will install some startup programs to the remote drive as well. Therefore, the remote drive has to be ready and work just like another drive BEFORE any of the startup programs start to load. Is that possible? My home PC has Windows 7 Professional 32 bit installed and the remote server is a Xen virtual server running on CentOS 6. I have admin/root permissions for both. Thanks a lot!

  Read the article

• Locale setting on a Red Hat box

  - by sasuke

  Hi all, Recently our organization got a couple of server boxes which are I guess present in some data-center in UK. The problem is that for some reason the default Locale representation in Java on that server returns en_US instead of the expected en_GB (I confirmed this by running a code on that server which simply outputs Locale.default()). I am pretty sure this has got something to do the way in which the boxes were set up. My question is: what would be the approach to fix this issue now that the OS has been installed? Is there any way I can for a given SSH session set the locale as en_GB instead of the current en_US? TIA, sasuke

  Read the article

• Port forwarding using IP Tables

  - by Darider

  I have a server with a LAN facing address of 192.168.5.100 (eth0) and another LAN facing address of 192.168.6.6 (eth1). On this server I have a Virtualbox instance of fedora running an apache webserver (on port 8080) with a bridged interface to eth1 on the host server with address of 192.168.6.7 Users on the 192.168.6.x network can access the Webserver on the Vbox instance (192.168.6.7) with no problems. My question is what kind of iptables entries or commands should be made/executed so as to allow for users on the 192.168.5.x network to access the webserver on the vbox instance. (I'm hoping their url can be something like: http://192.168.5.100:8080)

  Read the article

• SSRS report font problem on deployed reports

  - by Cylindric

  I have created several reports for my SQL Server Reporting Services 2008 SP2 server, using Visual Studio 2008 on my machine. The reports objects all use Arial as their font, in various sizes and weights. When I test them in VS, all looks fine, and I can print them and export them okay. When I deploy them to the server though, they look fine on-screen and if exported to PDF, but when printed directly from the web viewer, the fonts seem to go 'missing' - all the characters are squashed together as if there was a slight negative character-offset.

  Read the article

• Different behaviour of script locally and over ssh

  - by neorg

  I have a script on a server-A Script-A #!/bin/bash -l echo "script-A.sh" | change-environment.sh When I ssh onto server-A and execute it, it works fine. However, when I ssh user@server-A ./script-A.sh Script-A executes, but throws an undefined variable error in change-environment.sh. change-environment.sh runs in the c shell(I have no control over the script so the method I have used is about the only way I can use it), but everything else is in bash. Had found a similar question at I can run a script locally, but cannot do "ssh HOSTNAME /path/to/script.sh". However, there was no solution to the issue and it was a year old.

  Read the article

• Exchange 2007 OWA not listening on SSL port

  - by krs1

  I have an Exchange 2007 server that went down after a power failure. It has OWA access via SSL both externally and internally. OWA is working fine from the internal notwork, however I am getting a timeout when I attempt to connect externally. I pulled up wireshark and noticed that the server actually redirects to SSL. For some reason the server is not listening on the SSL port, and this seems to be causing the timeout. I normally do only development work, but I'm stuck with this since my sysadmin took off for the week and isn't answering my phone calls. As far as I know it shouldn't be a firewall issue. Aside from me not wanting to work on the damn thing, what should I look for?

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Mirrored servers in data centers nationwide -- how?

  - by Sysadmin Evstar

  Mirrored servers in data centers nationwide -- how? I flunked my IT interview by getting this question wrong. I thought that in the various metropolitan areas, an "http://google.com" request goes to the ISP's DNS server, which somehow returns an IP address for one of several geographically-nearby http servers, and then something internally rolls over to the next available local Google server. But then, I could not explain where the table of available local Google servers is actually cached, or the details of the IP address rollover. Or how they could manually take some server out of the rotation, from anywhere. So, what should I be reading now so I can ace this question next time? Also, what daemons run on these machines 24/7 to keep all those mirrored database disks synchronized?

  Read the article

• Apache spawning one process a day, what causes it?

  - by xtrimsky

  I have a PHP server running, with cron jobs etc... And once a day (between midnight and 3am), apache spawns one process that never ends. The server is a virtual server, so in a couple of days it eats up the whole memory. Is there a way to figure out what is crashing ? What php script isn't finishing ? Or what url via apache was triggered ? I have tried looking on the access logs, errors logs, but didn't find anything unusual. Thank you

  Read the article

• Tools to manage bunches of servers

  - by Stan

  Platform: most of them are Windows Server 2003, some are CentOS 5 Say if there're many game servers, is there any tools for engineers to easily manage? Below are some requirements. allow RDP (remote desktop) to servers. has group/permission setting. Classify by different functionality. So for people has permission to access certain group, they don't need further enter pwd to RDP servers, the tool will automatically log on the server. log activities: history about who has log on what server. Thanks.

  Read the article

• Amazon EC2 IPSEC

  - by John Qualis

  I have configured a ubuntu 12.04 64-bit server machine on Amazon AWS to act as a strongswan IPSEC server. I want to connect to it from my MAC OSX Lion's inbuilt IPSEC client. The OSX machine is in my home network. I log into the AWS machine using a ssh to ubuntu@public-ip and I provide the private RSA key in form of .pem file which I downloaded when the machine instance was created. The ssh connection works file but the IPSEC connection fails. What credentials/configurations should I provide for an IPSEC connection from my OSX client to AWS ubuntu server? My OSX machine is behind an ISP provided modem/router. Appreciate any help and thanks in advance

  Read the article

• HTTPS load balancing based on some component of the URL

  - by user38118

  We have an existing application that we wish to split across multiple servers (for example: 1000 users total, 100 users split across 10 servers). Ideally, we'd like to be able relay the HTTPS requests to a particular server based on some component of the URL. For example: Users 1 through 100 go to http://server1.domain.com/ Users 2 through 200 go to http://server2.domain.com/ etc. etc. etc. Where the incoming requests look like this: https://secure.domain.com/user/{integer user # goes here}/path/to/file Does anyone know of an easy way to do this? Pound looks promising... but it doesn't look like it supports routing based on URL like this. Even better would be if it didn't need to be hard-coded- The load balancer could make a separate HTTP request to another server to ask "Hey, what server should I relay to for a request to URL {the URL that was requested goes here}?" and relay to the hostname returned in the HTTP response.

  Read the article

• What does VNC reflectors basically do?

  - by honeybadger

  I am confused about what vnc reflector does. From the documentation http://sourceforge.net/projects/vnc-reflector/ I got that it's proxysitting between real VNC server (a host) and a number of VNC clients. My confusion is : 1. Does it make any changes to the coming stream from server 2. Does it make 1 connection with server to connect to many client or the connections are proportionate. Documentation is not clear in this. If anyone can help me?

  Read the article

< Previous Page | 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193  | Next Page >