Search Results

Search found 335 results on 14 pages for 'mirroring'.

Page 12/14 | < Previous Page | 8 9 10 11 12 13 14  | Next Page >

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Is there a screen sharing/remote desktop app for mac that lets you use a different host screen resolution?

  - by MarqueIV

  Ok, there are tons and tons of questions about remote desktop for mac and they're all being closed as duplicates. I however am specifically looking for one that will let me use a different resolution than the host, the way you can with Remote Desktop for Windows. For instance, when I connect to my 11" Macbook Air booted into Windows7 from my quad-screen desktop, also booted into Win7 using Microsoft's Remote Desktop Client, it blanks out the screen on the notebook, then virtualizes the video across all four of my desktop's monitors at their native resolutions (2560x1600, 2 x 1920x1200 and 1600x1200) and the notebook now acts as if it has four physical monitors connected to it. All of this from a notebook that only has a 1366 x 768 native resolution. Even when running OS X on the client running RDC, while it doesn't support multi-monitors like its Win counterpart, it still lets me run at the native resolution of the client screen of 2560x1600. Again, it just blanks out the host screen while doing so. However when using Mac's screen sharing, since that is just glorified VNC, it just mirrors what's already on the host's screen, meaning it will always be a single screen with the resolution of 1366x768. This of course makes sense since VNC is a mirroring solution, not a video-virtualizing one like RDC, but it means that on my quad-monitor setup, the remote window isn't even large enough to fill up a single monitor, let alone four (unless you have a client that can scale it up, but that's video scaling. It's still only 1366x768.) So what I'm looking for is if there is a solution on the Mac that lets me do the same thing as RDC in a Win environment. Don't care if I have to pay. I'd gladly pay several hundred dollars for this. I just need that specific feature. Note: People have suggested various VNC clients, but the VNC host still runs at 1366x768 so that will not work here. Ever. Also, people have suggested Synergy/Synergy+/Teleport and such which share the keyboard and mouse, not video. Completely different animal unrelated to what I'm looking for.

  Read the article

• Why can't I get out of display mirror mode?

  - by Roy Smith

  I've been running Ubuntu (10.04.1 LTS, 64-bit) for a while and just replaced my hardware with a faster machine with an ATI Radeon HD 5700 video card. I've got twin 1920 x 1080 displays. I downloaded the latest driver (ati-driver-installer-10-9-x86.x86_64.run) from the ATI web site and installed that. I've gone through a few rounds of playing with /etc/X11/xorg.conf, and can't get things right. At the moment, it's in display mirroring mode, and I can't figure out how to get it out of mirror mode. If I run Monitor Preferences, there's a "Same image in all monitors" checkbox. If I uncheck that, the little preview window switches to show two monitors. When I click Apply, it asks me to log out and log back in again. When I do that, I'm right back to mirrored mode. What's really weird is that I'm currently running a copy of xorg.conf from a coworker's machine. He's got identical hardware, and his display works fine. So, I'm inclined to think there's something else going on other than the conf file. Any ideas what might be wrong?

  Read the article

• Please help to find a solution for two way, real-time synchronization on Centos 5.5 64Bit

  - by Vipul Limbachiya

  I am in need of a real time, two way synchronization software for Centos 5.5 / 64Bit. Here's little explanation: It needs to be able to perform: Two way synchronization. It must be realtime. By realtime means it can be almost realtime, i.e. a delay of 1 second for example is fine. And the folders are on the same server. I am currently using GlusterFS across two webservers. However, it has extremely poor small file read performance and it's slowing down my website. There's nothing more that can be done to improve this, I have already tested many configurations. As a solution, I was going to mount a RAM drive (tmpfs) that mirrors the GlusterFS web files but get the webserver to use the RAM drive. The issue is that I need two way realtime mirroring or replication between glusterfs and the RAM drive. I need this is as Apache writes files as wells. As I said, realtime two way synchronization across two folders. Which are in fact 2 different mounts points. The RAM (tmpfs) mount poing and the GlusterFS mount point. I already know about: Rsync - Which is one way Unison - Which is not realtime Please suggest me any solution free or paid. Thanks in advance

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• Windows Home Server 2011, No disks "suitable for a backup destination"

  - by Scott Beeson

  I recently installed Windows Home Server 2011 and love it. However, when I try to set up server backups, it says no suitable disks are available. Initially, before I set up my RAID, it found one of my twin drives and said it would work. Once I set up the mirroring, that one is no longer available (obviously). However, I have an internal SATA 1TB drive and an external USB2.0 1TB drive hooked up. Both are recognized by Disk Management. WHS11 still says nothing suitable for backups. The two drives details are as follows: Edit to clarify: The system partition is on Disk 0, not listed below. The two below are the two that SHOULD be available for system backups. Disk 1: Dynamic "Data" (D:) 931.51 GB NTFS, Healthy Disk 3: Basic 200 MB Healthy (EFI System Partition) "Backup" 930.66 GB NTFS, Healthy (Primary Partition) What's a bit odd is that in Disk Management the "Backup" volume does not show a drive letter, even though I assigned Z: (which is reflected in "My Computer". I also cannot make this a dynamic disk as it says it's unsupported by the device.

  Read the article

• Network Sniffing and Hubs

  - by Chris_K

  This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

  Read the article

• Is there a learnable filter in Thunderbird for non-spam messages (as in Opera Mail)?

  - by Debilski

  One feature I like very much about Opera Mail is that you can have learnable filters for any purpose. So not only can you filter spam messages but also messages that your friends sent you or info mails from web platforms without having to enter each and every mail address you want to filter. It actually works quite satisfying and you can combine it with string filtering, too. It does a few mistakes in the beginning but then improves quickly after you have removed some of the false positives. However, there are a couple of drawbacks with the Opera Mail module. The filters are only ‘virtual’. So, with IMAP there is no easy way of mirroring the filtered structure back on the server and when I’m using webmail I’ll see the whole unfiltered mess in the inbox folder. Opera’s not using the OS X address book — and neither does it use ldap (which is not too important for me at the moment). So, I’m not specifically looking for a Thunderbird solution here, a way to fix things in Opera or Apple Mail should do as well. Or some other E-Mail program I don’t even know about yet. (So, to be clear, I’d like to have: OS X Address Book integration, Learnable filters for any type of filtering, Ability to push filtered folder structure to the IMAP server) But I thought like, if it is possible then most probably there would be an add-on for Thunderbird available. Any ideas?

  Read the article

• How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

  - by Rich Shealer

  My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

  Read the article

• Organization &amp; Architecture UNISA Studies &ndash; Chap 6

  - by MarkPearl

  Learning Outcomes Discuss the physical characteristics of magnetic disks Describe how data is organized and accessed on a magnetic disk Discuss the parameters that play a role in the performance of magnetic disks Describe different optical memory devices Magnetic Disk The way data is stored on and retried from magnetic disks Data is recorded on and later retrieved form the disk via a conducting coil named the head (in many systems there are two heads) The writ mechanism exploits the fact that electricity flowing through a coil produces a magnetic field. Electric pulses are sent to the write head, and the resulting magnetic patterns are recorded on the surface below with different patterns for positive and negative currents The physical characteristics of a magnetic disk   Summarize from book   The factors that play a role in the performance of a disk Seek time – the time it takes to position the head at the track Rotational delay / latency – the time it takes for the beginning of the sector to reach the head Access time – the sum of the seek time and rotational delay Transfer time – the time it takes to transfer data RAID The rate of improvement in secondary storage performance has been considerably less than the rate for processors and main memory. Thus secondary storage has become a bit of a bottleneck. RAID works on the concept that if one disk can be pushed so far, additional gains in performance are to be had by using multiple parallel components. Points to note about RAID… RAID is a set of physical disk drives viewed by the operating system as a single logical drive Data is distributed across the physical drives of an array in a scheme known as striping Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure (not supported by RAID 0 or RAID 1) Interesting to note that the increase in the number of drives, increases the probability of failure. To compensate for this decreased reliability RAID makes use of stored parity information that enables the recovery of data lost due to a disk failure.   The RAID scheme consists of 7 levels…   Category Level Description Disks Required Data Availability Large I/O Data Transfer Capacity Small I/O Request Rate Striping 0 Non Redundant N Lower than single disk Very high Very high for both read and write Mirroring 1 Mirrored 2N Higher than RAID 2 – 5 but lower than RAID 6 Higher than single disk Up to twice that of a signle disk for read Parallel Access 2 Redundant via Hamming Code N + m Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Parallel Access 3 Bit interleaved parity N + 1 Much higher than single disk Highest of all listed alternatives Approximately twice that of a single disk Independent Access 4 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, significantly lower than single disk for write Similar to RAID 0 for read, significantly lower than single disk for write Independent Access 5 Block interleaved parity N + 1 Much higher than single disk Similar to RAID 0 for read, lower than single disk for write Similar to RAID 0 for read, generally  lower than single disk for write Independent Access 6 Block interleaved parity N + 2 Highest of all listed alternatives Similar to RAID 0 for read; lower than RAID 5 for write Similar to RAID 0 for read, significantly lower than RAID 5  for write   Read page 215 – 221 for detailed explanation on RAID levels Optical Memory There are a variety of optical-disk systems available. Read through the table on page 222 – 223 Some of the devices include… CD CD-ROM CD-R CD-RW DVD DVD-R DVD-RW Blue-Ray DVD Magnetic Tape Most modern systems use serial recording – data is lade out as a sequence of bits along each track. The typical recording used in serial is referred to as serpentine recording. In this technique when data is being recorded, the first set of bits is recorded along the whole length of the tape. When the end of the tape is reached the heads are repostioned to record a new track, and the tape is again recorded on its whole length, this time in the opposite direction. That process continued back and forth until the tape is full. To increase speed, the read-write head is capable of reading and writing a number of adjacent tracks simultaneously. Data is still recorded serially along individual tracks, but blocks in sequence are stored on adjacent tracks as suggested. A tape drive is a sequential access device. Magnetic tape was the first kind of secondary memory. It is still widely used as the lowest-cost, slowest speed member of the memory hierarchy.

  Read the article

• Traverse 2D Array (Matrix) Diagonally

  - by jonobr1

  So I found this thread that was extremely helpful in traversing an array diagonally. I'm stuck though on mirroring it. For example: var m = 3; var n = 4; var a = new Array(); var b = 0; for(var i = 0; i < m; i++) { a[i] = new Array(n); for(var j = 0; j < n; j++) { a[i][j] = b; b++; } } for (var i = 0; i < m + n - 1; i++) { var z1 = (i < n) ? 0 : i - n + 1; var z2 = (i < m) ? 0 : i - m + 1; for (var j = i - z2; j >= z1; j--) { console.log(a[j][i - j]); } } Console reads [[0],[4,1],[8,5,2],[9,6,3],[10,7],[11]] I'd like it to read [[8],[4,9],[0,5,10],[1,6,11],[2,7],[3]] Been stumped for awhile, it's like a rubik's cube _<

  Read the article

• How do you construct an array suitable for numpy sorting?

  - by Alex

  I need to sort two arrays simultaneously, or rather I need to sort one of the arrays and bring the corresponding element of its associated array with it as I sort. That is if the array is [(5, 33), (4, 44), (3, 55)] and I sort by the first axis (labeled below dtype='alpha') then I want: [(3.0, 55.0) (4.0, 44.0) (5.0, 33.0)]. These are really big data sets and I need to sort first ( for nlog(n) speed ) before I do some other operations. I don't know how to merge my two separate arrays though in the proper manner to get the sort algorithm working. I think my problem is rather simple. I tried three different methods: import numpy x=numpy.asarray([5,4,3]) y=numpy.asarray([33,44,55]) dtype=[('alpha',float), ('beta',float)] values=numpy.array([(x),(y)]) values=numpy.rollaxis(values,1) #values = numpy.array(values, dtype=dtype) #a=numpy.array(values,dtype=dtype) #q=numpy.sort(a,order='alpha') print "Try 1:\n", values values=numpy.empty((len(x),2)) for n in range (len(x)): values[n][0]=y[n] values[n][1]=x[n] print "Try 2:\n", values #values = numpy.array(values, dtype=dtype) #a=numpy.array(values,dtype=dtype) #q=numpy.sort(a,order='alpha') ### values = [(x[0], y[0]), (x[1],y[1]) , (x[2],y[2])] print "Try 3:\n", values values = numpy.array(values, dtype=dtype) a=numpy.array(values,dtype=dtype) q=numpy.sort(a,order='alpha') print "Result:\n",q I commented out the first and second trys because they create errors, I knew the third one would work because that was mirroring what I saw when I was RTFM. Given the arrays x and y (which are very large, just examples shown) how do I construct the array (called values) that can be called by numpy.sort properly? *** Zip works great, thanks. Bonus question: How can I later unzip the sorted data into two arrays again?

  Read the article

• Is their a definitive list for the differences between the current version of SQL Azure and SQL Serv

  - by Aim Kai

  I am a relative newbie when it comes to SQL Azure!! I was wondering if there was a definitive list somewhere regarding what is and is not supported by SQL Azure in regards to SQL Server 2008? I have had a look through google but I've noticed some of the blog posts are missing things which I have found through my own testing: For example, quite a lot is summarised in this blog entry http://www.keepitsimpleandfast.com/2009/12/main-differences-between-sql-azure-and.html Common Language Runtime (CLR) Database file placement Database mirroring Distributed queries Distributed transactions Filegroup management Global temporary tables Spatial data and indexes SQL Server configuration options SQL Server Service Broker System tables Trace Flags which is a repeat of the MSDN page http://msdn.microsoft.com/en-us/library/ff394115.aspx I've noticed from my own testing that the following seem to have issues when migrating from SQL Server 2008 to the Azure: XML Types (the msdn does mention large custom types - I guess it may include this?? even if the data schema is really small?) Multi-part views I've been using SQL Azure Migration Wizard v3.1.8 to migrate local databases into the cloud. I was wondering if anyone could point to a list or give me any information till when these features are likely to be included in SQL Azure.

  Read the article

• Ruby Fileutils.cp_r Permission Denied when :preserve => true

  - by slawley

  Hello, I am trying to implement a poor-man's backup/mirroring script and am having some trouble. I am on Windows-XP, using Ruby's FileUtils module to recursively copy files. So long as I don't set the :preserve flag to true, everything works fine. Works: FileUtils.cp_r('Source_dir', 'Dest_dir', :verbose => true) Doesn't work: FileUtils.cp_r('Source_dir', 'Dest_dir', :verbose => true, :preserve => true) I have full permissions on the Dest_dir as it's on the desktop of my local machine and I just created it. I can copy and delete files and folders, but apparently changing, or maintaining the file attributes with :preserve isn't working. I haven't had a chance to try this on a Mac or linux box, but from reading around online the :preserve flag is a normal stumbling block to come up against in a Windows environment. In a similar line of questioning, what is the default behavior for FileUtils.cp_r when it encounters an existing file at the destination directory? Simply overwrite and replace everything in Destination with whatever is in Source, or can I skip a file with conflicts and just log it for resolution later? (If this should be a separate question, just let me know and I'll make it one.) Thanks, Spencer

  Read the article

• Module based web project directory layout with git and symlinks

  - by karlthorwald

  I am planning my directory structure for a linux/apache/php web project like this: Only www.example.com/webroot/ will be exposed in apache www.example.com/ webroot/ index.php module1/ module2/ modules/ module1/ module1.class.php module1.js module2/ module2.class.php module2.css lib/ lib1/ lib1.class.php the modules/ and lib/ directory will only be in the php path. To make the css and js files visible in the webroot directory I am planning to use symlinks. webroot/ index.php module1/ module1.js (symlinked) module2/ module2.css (symlinked) I tried following these principles: layout by modules and libraries, not by file type and not by "public' or 'non public', index.php is an exception. This is for easier development. symlinking files that need to be public for the modules and libs to a public location, but still mirroring the layout. So the module structure is also visible in the resulting html code in the links, which might help development. How will git handle the symlinking of the single files correctly, is there something to consider? When it comes to images I will need to link directories, how to handle that with git? modules/ module3/ module3.class.php img/ img1.jpg img2.jpg img3.jpg They should be linked here: webroot/ module3/ img/ (symlinked ?) So this is a git and symlink question. But I would be interested to hear comments about the php layout, maybe you want to use the comment function for this.

  Read the article

• php user authentication libraries / frameworks ... what are the options?

  - by es11

  I am using PHP and the codeigniter framework for a project I am working on, and require a user login/authentication system. For now I'd rather not use SSL (might be overkill and the fact that I am using shared hosting discourages this). I have considered using openID but decided that since my target audience is generally not technical, it might scare users away (not to mention that it requires mirroring of login information etc.). I know that I could write a hash based authentication (such as sha1) since there is no sensitive data being passed (I'd compare the level of sensitivity to that of stackoverflow). That being said, before making a custom solution, it would be nice to know if there are any good libraries or packages out there that you have used to provide semi-secure authentication? I am new to codeigniter, but something that integrates well with it would be preferable. Any ideas? (i'm open to criticism on my approach and open to suggestions as to why I might be crazy not to just use ssl). Thanks in advance. Update: I've looked into some of the suggestions. I am curious to try out zend-auth since it seems well supported and well built. Does anyone have experience with using zend-auth in codeigniter (is it too bulky?) and do you have a good reference on integrating it with CI? I do not need any complex authentication schemes..just a simple login/logout/password-management authorization system. Also, dx_auth seems interesting as well, however I am worried that it is too buggy. Has anybody else had success with this? I realized that I would also like to manage guest users (i.e. users that do not login/register) in a similar way to stackoverflow..so any suggestions that have this functionality would be great

  Read the article

• Select all points in a matrix within 30m of another point

  - by pinnacler

  So if you look at my other posts, it's no surprise I'm building a robot that can collect data in a forest, and stick it on a map. We have algorithms that can detect tree centers and trunk diameters and can stick them on a cartesian XY plane. We're planning to use certain 'key' trees as natural landmarks for localizing the robot, using triangulation and trilateration among other methods, but programming this and keeping data straight and efficient is getting difficult using just Matlab. Is there a technique for sub-setting an array or matrix of points? Say I have 1000 trees stored over 1km (1000m), is there a way to say, select only points within 30m radius of my current location and work only with those? I would just use a GIS, but I'm doing this in Matlab and I'm unaware of any GIS plugins for Matlab. I forgot to mention, this code is going online, meaning it's going on a robot for real-time execution. I don't know if, as the map grows to several miles, using a different data structure will help or if calculating every distance to a random point is what a spatial database is going to do anyway. I'm thinking of mirroring two arrays, one sorted by X and the other by Y. Then bubble sorting to determine the 30m range in that. I do the same for both arrays, X and Y, and then have a third cross link table that will select the individual values. But I don't know, what that's called, how to program that and I'm sure someone already has so I don't want to reinvent the wheel. Cartesian Plane GIS

  Read the article

• Advice needed: cold backup for SQL Server 2008 Express?

  - by Mikey Cee

  What are my options for achieving a cold backup server for SQL Server Express instance running a single database? I have an SQL Server 2008 Express instance in production that currently represents a single point of failure for my application. I have a second physical box sitting at the installation that is currently doing nothing. I want to somehow replicate my database in near real time (a little bit of data loss is acceptable) to the second box. The database is very small and resources are utilized very lightly. In the case that the production server dies, I would manually reconfigure my application to point to the backup server instead. Although Express doesn't support log shipping, I am thinking that I could manually script a poor man's version of it, where I use batch files to take the logs and copy them across the network and apply them to the second server at 5 minute intervals. Does anyone have any advice on whether this is technically achievable, or if there is a better way to do what I am trying to do? Note that I want to avoid having to pay for the full version of SQL Server and configure mirroring as I think it is an overkill for this application. I understand that other DB platforms may present suitable options (eg. a MySQL Cluster), but for the purposes of this discussion, let's assume we have to stick to SQL Server.

  Read the article

• Component based web project directory layout with git and symlinks

  - by karlthorwald

  I am planning my directory structure for a linux/apache/php web project like this: Only www.example.com/webroot/ will be exposed in apache www.example.com/ webroot/ index.php comp1/ comp2/ component/ comp1/ comp1.class.php comp1.js comp2/ comp2.class.php comp2.css lib/ lib1/ lib1.class.php the component/ and lib/ directory will only be in the php path. To make the css and js files visible in the webroot directory I am planning to use symlinks. webroot/ index.php comp1/ comp1.js (symlinked) comp2/ comp2.css (symlinked) I tried following these principles: layout by components and libraries, not by file type and not by "public' or 'non public', index.php is an exception. This is for easier development. symlinking files that need to be public for the components and libs to a public location, but still mirroring the layout. So the component and library structure is also visible in the resulting html code in the links, which might help development. git usage should be safe and always work. it would be ok to follow some procedure to add a symlink to git, but after that checking them out or changing branches should be handled safely and clean How will git handle the symlinking of the single files correctly, is there something to consider? When it comes to images I will need to link directories, how to handle that with git? component/ comp3/ comp3.class.php img/ img1.jpg img2.jpg img3.jpg They should be linked here: webroot/ comp3/ img/ (symlinked ?) If using symlinks for that has disadvantages maybe I could move images to the webroot/ tree directly, which would break the first principle for the third (git practicability). So this is a git and symlink question. But I would be interested to hear comments about the php layout, maybe you want to use the comment function for this.

  Read the article

• C++ Program Flow: Sockets in an Object and the Main Function

  - by jfm429

  I have a rather tricky problem regarding C++ program flow using sockets. Basically what I have is this: a simple command-line socket server program that listens on a socket and accepts one connection at a time. When that connection is lost it opens up for further connections. That socket communication system is contained in a class. The class is fully capable of receiving the connections and mirroring the data received to the client. However, the class uses UNIX sockets, which are not object-oriented. My problem is that in my main() function, I have one line - the one that creates an instance of that object. The object then initializes and waits. But as soon as a connection is gained, the object's initialization function returns, and when that happens, the program quits. How do I somehow wait until this object is deleted before the program quits? Summary: main() creates instance of object Object listens Connection received Object's initialization function returns main() exits (!) What I want is for main() to somehow delay until that object is finished with what it's doing (aka it will delete itself) before it quits. Any thoughts?

  Read the article

• Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

  - by Sean Killeen

  The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

  Read the article

• How to use Hardware RAID in Ubuntu Server

  - by user2071938

  I have an Adaptec RAID-Controller and created an RAID-1(Mirroring) succesfully. Now I have installed Ubuntu Server 12.04.3. When I type fdisk -l I get this output: bf@fileserver:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c454 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 499711 248832 83 Linux /dev/sdc2 501758 156301311 77899777 5 Extended /dev/sdc5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/fileserver--vg-root: 75.6 GB, 75606523904 bytes 255 heads, 63 sectors/track, 9191 cylinders, total 147668992 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-root doesn't contain a valid partition table Disk /dev/mapper/ddf1_Data: 1000.1 GB, 1000065728512 bytes 255 heads, 63 sectors/track, 121584 cylinders, total 1953253376 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ddf1_Data doesn't contain a valid partition table Disk /dev/mapper/fileserver--vg-swap_1: 4160 MB, 4160749568 bytes 255 heads, 63 sectors/track, 505 cylinders, total 8126464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-swap_1 doesn't contain a valid partition table The 80 GB HDD is for the System The 1000.2 GB HDD should be for my data. But I'm a bit confused becauser there are listed two 1000.2 GB HDDs, due the Hardware RAID shoudln't there be only one HDD vissible to the OS? (I have two 1000.2 GB HDDs in an Raid-1 Array) dmraid gives me bf@fileserver:~$ sudo dmraid -r /dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 /dev/sda: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 so It seems to be ok? But how do I partitionate this disks and which one should I mount(sdb or sda?) Hope you can help me thx Florian

  Read the article

• Windows 7 file-based backup service

  - by Ben Voigt

  I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

  Read the article

• Areca 1280ml RAID6 volume set failed

  - by Richard

  Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

  Read the article

• Windows Server 2008 Migration - Did I miss something?

  - by DevNULL

  I'm running in to a few complications in my migration process. My main role has been a Linux / Sun administrator for 15 yrs so Windows server 2008 environment is a bit new to me, but understandable. Here's our situation and reason for migrating... We have a group of developers that develop VERY low-level software in Visual C with some inline assembler. All the workstations were separate from each other which cased consistency problems with development libraries, versions, etc... Our goal was to throw them all on to a Windows domain were we can control workstation installations, hot fixes (which can cause enormous problems), software versions, etc... All Development Workstations are running Windows XP x32 (sp3) and x64 (sp2) I running in to user permission problems and I was wondering maybe I missed one, tWO or a handful of things during my deployment. Here is what I have currently done: Installed and Activated Windows Server 2008 Added Roles for DNS and Active Directory Configured DNS with WINS for netbios name usage Added developers to AD and mapped their shared folders to their profile Added roles for IIS7 and configured the developers SVN Installed MySQL Enterprise Edition for development usage Not having a firm understanding of Group Policy I haven't delved deeply in to that realm yet. Problems I'm encountering: 1. When I configure any XP workstations to logon our domain, once a user uses their new AD login, everything goes well, except they have very restrictive permissions. (Eg: If a user opens any existing file, they don't have write access, except in their documents folder.) Since these guys are working on low system level events, they need to r/w all files. All I'm looking to restrict in software installations. Am I correct to assume that I can use WSUS to maintain the domains hot fixes and updates pushed to the workstations? I need to map a centralized shared development drive upon the users login. This is open to EVERYONE. Right now I have the users folders mapped upon login through their AD profile. But how do I map a share if I've already defined one within their profile in AD? Any responses would be very grateful. Do I have to configure and define a group policy for the domain users? Can I use Volume Mirroring to mirror / sync two drives on two separate servers or should I just script a rsync or MS Synctool? The drives simply store nightly system images.

  Read the article

< Previous Page | 8 9 10 11 12 13 14  | Next Page >