Search Results

Search found 2513 results on 101 pages for 'scott ryan'.

Page 12/101 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Dock with dual external DVI monitors with Intel + Nvidia Optimus?

  - by Ryan

  I have a Dell Latitude E6420 laptop plugged into a docking station, and the dock has 2 monitors (connected with DVI). Also note that I've installed Ubuntu alongside (dual-boot) Windows 7. I can't get the dual monitors to work both on Ubuntu (either 11.10 or 12.04) and Windows 7. When I run lspci | grep VGA, I get: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF108 [Quadro NVS 4200M] (rev a1) If I then reboot and uncheck Optimus setting in the BIOS during reboot, I'm able to get the dual monitors to work in Ubuntu 12.04 (but I need to configure them every boot in Nvidia Settings). When I run lspci | grep VGA, I get: 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) But then if I reboot into Windows (leaving the Optimus unchecked), Windows can't detect external monitors, and the resolution is unacceptably low. I've seen on many forum posts that this particular graphics card setup causes lots of headaches. I haven't been able to resolve my problem yet. How can I use my external display on my laptop with intel and nvidia video cards? How to use external displays with Intel driver on a NVidia/Intel hybrid system nVidia Optimus , Unity 3D and Dual Monitors "Just use VGA instead of DVI" isn't an option because my dock has only 1 VGA port (and 2 DVI). Switching the BIOS setting on every reboot and then reconfiguring the display settings every time is tedious, time-consuming, and impractical. Do you know how to make this work smoothly? Thanks for your help! P.S. see also: http://superuser.com/questions/434358/dell-latitude-e6420-dual-boot-ubuntu-windows-7-optimus-graphics-problems

  Read the article

• Rotate around the centre of the screen

  - by Dan Scott

  I want my camera to rotate around the centre of screen and I'm not sure how to achieve that. I have a rotation in the camera but I'm not sure what its rotating around. (I think it might be rotating around the position.X of camera, not sure) If you look at these two images: http://imgur.com/E9qoAM7,5qzyhGD#0 http://imgur.com/E9qoAM7,5qzyhGD#1 The first one shows how the camera is normally, and the second shows how I want the level to look when I would rotate the camera 90 degrees left or right. My camera: public class Camera { private Matrix transform; public Matrix Transform { get { return transform; } } private Vector2 position; public Vector2 Position { get { return position; } set { position = value; } } private float rotation; public float Rotation { get { return rotation; } set { rotation = value; } } private Viewport viewPort; public Camera(Viewport newView) { viewPort = newView; } public void Update(Player player) { position.X = player.PlayerPos.X + (player.PlayerRect.Width / 2) - viewPort.Width / 4; if (position.X < 0) position.X = 0; transform = Matrix.CreateTranslation(new Vector3(-position, 0)) * Matrix.CreateRotationZ(Rotation); if (Keyboard.GetState().IsKeyDown(Keys.D)) { rotation += 0.01f; } if (Keyboard.GetState().IsKeyDown(Keys.A)) { rotation -= 0.01f; } } } (I'm assuming you would need to rotate around the centre of the screen to achieve this)

  Read the article

• The Dispose Pattern (and FxCop warnings)

  - by Scott Dorman

  [This is actually a response to Bill’s blog post, but since it isn’t possible to leave this as a comment on his blog it’s a post here.] There are many different ways to implement the Dispose pattern correctly. Some are (in my opinion) better than others. In Bill’s blog post he presents a particular pattern, which is an excerpt from his book (Effective C#). The issue centers around the fact that a reader took the code sample presented in the book and ran FxCop (Code Analysis) on it, which generated a warning: “Ensure that base.Dispose() is always called.” The “lesson learned” that Bill presents is that “tools are there to help us, not control us.” While I completely agree with the belief that tools are there to help us, I think it’s important to understand why FxCop is raising this particular warning. The code presented in Bill’s book looks like: // Have its own disposed flag.private bool disposed = false;protected override void Dispose(bool isDisposing){ // Don't dispose more than once. if (disposed) return; if (isDisposing) { // TODO: free managed resources here. } // TODO: free unmanaged resources here. // Let the base class free its resources. // Base class is responsible for calling // GC.SuppressFinalize( ) base.Dispose(isDisposing); // Set derived class disposed flag: disposed = true;} This code does follow all of the guidelines for implementing the Dispose pattern. In this case, it’s presumably part of a larger example showing how to implement the pattern as part of a base class. The reason FxCop is warning you about this code is the first if statement in the Dispose method, which will cause the method to exit if disposed is true. The problem here is that there is the possibility that if the disposed flag is true, the call to base.Dispose() will never be executed. As Bill points out, it is possible for some other code elsewhere in the class to set this flag. He states that this is an “unlikely occurrence.” While that is probably true, it can be a potentially dangerous assumption to make and is one that can be easily corrected. By changing the code slightly you can remove this assumption and correct the FxCop violation. private bool disposed = false;protected override void Dispose(bool disposing){ if (!disposed) { if (disposing) { // Dispose managed resources. } // Dispose unmanaged resources. disposed = true; } base.Dispose(disposing);} Using this implementation allows the call to base.Dispose() to always occur, which ensures that the the disposal chain is always properly followed. Technorati Tags: .NET,C#,Dispose Pattern

  Read the article

• Google Ads Blocking Other Site Elements From Loading

  - by Scott Schluer

  I'm using Google DFP to serve Adsense ads. In Google Chrome (this doesn't seem to happen in other browsers), the page will get stuck loading pagead2.googlesyndication.com. It will just load for hours if I let it. In the meantime, only about half or slightly more of the dynamic images on my page will have completed loading. It appears this is blocking other elements on my site from loading. Any suggestions on what I can do to fix this?

  Read the article

• /etc/init.d Character Encoding Issue

  - by Ryan Rosario

  I have a script in /etc/init.d on an EC2 image that, on machine startup, pulls in source code via SVN, builds it, and then runs it using Ant. The source code is Java. Within this code is a call to the Weka library which writes a file to disk. On most Ubuntu AMIs, and my home machines' versions of Ubuntu, there is no issue. The problem is that with certain versions/AMIs of Ubuntu, Unicode characters in the file are replaced with question marks ('?'). If I run the job manually on the trouble instance, Unicode is output to file correctly, but not when run from /etc/init.d. What might be causing this problem and how can I fix it so that Unicode characters appear correctly in files written from /etc/init.d processes?

  Read the article

• Tool to search for packages whose installed version does not match any version from a repository?

  - by Ryan Thompson

  I just upgraded from Lucid to Maverick, and as expected, all my PPAs were disabled. I have re-enabled most of the ones that I want, but I would like to get a list of all packages that I installed from PPAs that I no longer have enabled. I feel that the best way to do this would be to search for all packages where the currently installed version of that package does not match any version from a currently-enabled repository. Is there an easy way to search for such packages. Command-line solutions welcome.

  Read the article

• Are there keylogger viruses that affect Ubuntu?

  - by Ryan McClure

  I just within the last few hours had my Amazon and Gmail accounts hijacked. Purchases were made through my Amazon account that I didn't authorize...in fact, I wasn't even in my room. According to Gmail, the IP address of when I got hijacked was where I live. Enough rambling, here's my question: are there keylogger viruses on Ubuntu? I am not sure if either i accidentally let my password out there somewhere, or maybe I have a keylogger. I'm currently installing ClamAV to scan for viruses. Any help would be absolutely appreciated.

  Read the article

• Are there open source alternatives to Bitbucket, Github, Kiln, and similar DVCS browsing and management tools?

  - by Ryan Taylor

  I am aware of several tools/services that provide DVCS browsing and management such as Bitbucket, Github, Kiln, SCM-Manager and Rhodecode. However, the use case I am considering is one such that: Any source code must reside on an employers internal servers. The solution must be open source. It should provide a Bitbucket or Github like experience, including a project wiki, repository browsing and management, and social coding aspects such as code review. The solution should have mercurial support (if not support for other DVCSs). Of these, only SCM-Manager and RhodeCode come close as they can be installed on your own servers and are open source. However they do not have the Bitbucket or Github experience. There is no issue tracker or wiki and the UI, while functional, is not up to par with Github or Bitbucket. I can get close with Trac or Redmine with their repository browsers but unfortunately they do not have any repository management capabilities. Are there other open source tools out there that would provide a similar experience to Bitbucket, Github or Kiln?

  Read the article

• Ubuntu Server Read-Only Filesystem Issue

  - by Scott Deutsch

  We are running a virtual machine server with multiple virtual machines with ubuntu server edition 12.04 and every so often (usually after updates via webmin it seems), the hard-drive turns into read-only filesystem. Only two of the virtual machines get affected by this problem (that I noticed so far). What could be causing this issue? What could we try to fix this problem? Has anyone else had this problem before? If so, what did you do to fix it? If I use Aptitude instead of webmin, it will not turn into into a read-only filesystem. Though this could be a coincidence. Could it be a webmin issue? Thanks. UPDATE 1 Looks like this is not an update/webmin issue at all. How I know this is because one of the virtual servers is a git server and it turned into a read-only filesystem out of the blue today. With this new info provided to you, what should I try? Thanks.

  Read the article

• Disable alt + tab moving windows by itself

  - by Lie Ryan

  Whenever I press Alt + Tab , Unity moves the window I'm switching to so that the whole window is inside the screen. This behavior is excruciatingly annoying because I often move a window (usually text editors) partially outside the current screen so I can view another window below it (usually a browser). Every time I Alt + Tab back to the text editor, I'm getting an unnecessary virtual screen switch, and Unity is rearranging the windows behind my back. For instance, here is a browser and text editor on Virtual Screen 1 (top left), note that the text editor is partially outside the current screen: Then I Alt-Tab to the browser (or clicked on it): Next, I Alt + Tab again to get back to the text editor, but Alt-Tab switched me to Virtual Screen 4 (bottom right) because a larger percentage of the text editor window is on virtual screen 4 than in virtual screen 1; and the browser is no longer in the screen. Also note that the text editor window moves from being on the bottom-right to the top-left, which is very disorienting as I can no longer keep track of where any of my windows are since they all keep moving around by themselves.. How do I disable this behavior? I don't want to have any virtual screen switch when Alt + Tab , especially since Alt + Tab does not list windows that is completely not in the current virtual screen anyway.

  Read the article

• How easily recognized are new TLDs?

  - by Ryan Muller

  I'm interested in purchasing a domain name for a new service I intend to market. I know that .com is instantly recognizable as a domain ending, and if I see stackoverflow.com I know it's a web address. However, I also recognize strings like github.io and mysite.tk as domains, since I've worked with domains like these. To the average member of the public, if one sees an address ending in .io or similar, non-mainstream TLD (e.g. on a billboard or business card) would they immediately know it's a URL and to type it into a browser? Or are these new domains only useful 1) for a technical audience or 2) when you will be primarily promoting your site through links and not print?

  Read the article

• Forwarding a subdomain to main domain using Godaddy

  - by Ryan Hayes

  I have current blog, which was hosted on Tumblr at http://blog.ryanhayes.net. I'm moving it over to http://ryanhayes.net, and have all the 301 redirects set up for the blog entries to map to my new blog, which is hosted using Godaddy (domain included). When I try to set up a subdomain forward, I'm greeted with a nice 403 Forbidden response (as of this writing, you can see it at http://blog.ryanhayes.net. When I try to ping both the subdomain and domain, they point to the same IP address, so I know blog subdomain has at least switched over to point to the same content. I don't really understand why I would get a 403 Forbidden on the same content that I can see perfectly fine via another domain. Currently, I have a CNAME of blog pointing to @, which is how "www" is set up to forward, so I'm assuming it would do the same thing. My question is what is the proper way to set up my DNS to make the blog subdomain forward to my main domain (301) using the GoDaddy DNS manager? Bonus: What is the background on why I am getting a 403 error the current way? Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. UPDATE 12/7/2010 Error on site has been fixed, you can no longer view it from my site.

  Read the article

• On-Demand Webcast: Managing Oracle Exadata with Oracle Enterprise Manager 11g

  - by Scott McNeil

  Watch this on-demand webcast and discover how Oracle Enterprise Manager 11g's unique management capabilities allow you to efficiently manage all stages of Oracle Exadata's lifecycle, from testing applications on Exadata to deployment. You'll learn how to: Maximize and predict database performance Drive down IT operational costs through automation Ensure service quality with proactive management Register today and unlock the potential of Oracle Exadata for your enterprise. Register Now!

  Read the article

• Visual Studio 2010 Short Cut Links!

  - by Dave Noderer

  This week Scott Cate came to South Florida and gave a great talk on his Visual Studio shortcuts and how he uses them. You can find a collection of short video’s he has done at: http://scottcate.com/tricks/ Also you might want to check out Sara Ford’s blog: http://blogs.msdn.com/saraford/default.aspx, she started doing a tip a day but has many more now. Scott covers many of these in the videos. And.. as with past releases, the languages team has provided PDF’s with a lot of keyboard shortcuts, this time for VB, C#, F# and C++. You can find downloads for all of these at the top of the FlaDotNet.com page and are included below: VB: http://www.fladotnet.com/downloads/VS2010VB.pdf C#: http://www.fladotnet.com/downloads/VS2010CSharp.pdf F#: http://www.fladotnet.com/downloads/VS2010FSharp.pdf C++: http://www.fladotnet.com/downloads/VS2010CPP.pdf Happy Keyboarding!!

  Read the article

• What would be the level of effort required to implement a screencapture command on a PS3 game?

  - by Sean Scott

  Looking to see what the level of effort is for implementing a screen capture command into PS3 game by a mid-level PS3 game developer. Bonus for a description of what is involved in the process... EDIT Not sure how to get back my question since it was the first but let me clarify some things. @Nate Bross, nope I am not the actor although i've fielded calls for him on occasion @coderanger my intent was to try and speak to other PS3 developers, however coming from a web development no one in my social circle close or extended develops on the PS3. Additionally i'm interested in hearing the effort required in terms of hours so that this information can be passed on to a client. A client who has a game on the PS3 using the unreal engine. Convo with devs sometimes go something like "can you implement feature a" which gets a response "this will take us 8 weeks and an army". Trying to be educated before the ask. I hope that helps If anyone here is a PS3 game dev and would like to respond off site so as not to break NDA that would be awesome. @Roger it would be from within the game, something that users can use. Something akin to the iphone screencap utility. No need to get fancier than that.

  Read the article

• Thumbnails for certain formats not appearing in Nautilus

  - by Ryan McClure

  The following formats do not have an icon in Nautilus: .odt .odb And, some of my older documents are missing their thumbnails, all of which are either .odt or .odp. I just purged and reinstalled LibreOffice today...could this be the reason why? Edit: Sorry about my vagueness I am on Ubuntu 11.10, using LibreOffice 3.4 340m1(Build:402) that comes by default in the repos. Here's a screenshot of what I see for these formats.

  Read the article

• Network Issues only on one network with a Broadcom BCM4312

  - by Ryan McClure

  My Ubuntu 11.10 laptop is having network connection issues...only on one network. I have a BCM4312 card and I'm using the proprietary driver. Whenever I connect to a network over wireless connection, I have no trouble except for one network. In my dorm, if I try to connect to the wireless network, it stays connected from anywhere to 30 seconds to 30 minutes before it will still be "connected" according to the indicator but there is no incoming/outgoing internet connection. This only happens in this building. Other networks with the same name at other buildings on my campus have no issue whatsoever. I took it to the tech department here and they keep claiming it's my laptop; but, if I can connect to other networks with absolutely no issues, why can't my laptop connect here? So, here's my question: Is it my laptop, or is it the network? As a side note, no one else that I know has issues on this network but one; she's running Windows 7 and I forget what kind of laptop it is. One of the people in my hall runs Ubuntu 12.04 and has no problem with the wireless. What do you all think of this?

  Read the article

• IE6 Support - When to drop it? [closed]

  - by Scott Brown

  Possible Duplicate: Should I bother supporting IE6? I'm thinking about IE6 support and when to give up on it. Do you have a percentage of total visitors figure in mind for when to drop support? Would you let a trend develop past this figure or are you just going take the first opportunity? I've seen a 44% drop in IE6 visitors in the past 12 months from 23%(ish) of visitors down to 13%(ish). Even if it was 5% it still seems too early to drop support to me (it's still 1 in every 20 users). What are people's thoughts on this?

  Read the article

• Favorite Visual Studio 2010 Extensions

  - by Scott Dorman

  Now that Visual Studio 2010 has been released, there are a lot of extensions being written. In fact, as of today (May 1, 2010 at 15:40 UTC) there are 809 results for Visual Studio 2010 in the Visual Studio Gallery. If you filter this list to show just the free items, there are still 251 extensions available. Given that number (and it is currently increasing weekly) it can be difficult to find extensions that are useful. Here is the list of extensions that I currently have installed and find useful: Word Wrap with Auto-Indent Indentation Matcher Extension Structure Adornment This also installs the following extensions: BlockTagger BlockTaggerImpl SettingsStore SettingsStoreImpl Source Outliner Triple Click ItalicComments Go To Definition Spell Checker Remove and Sort Using Format Document Open Folder in Windows Explorer Find Results Highlighter Regular Expressions Margin Indention Matcher Extension Word Wrap with Auto-Indent VSCommands HelpViewerKeywordIndex StyleCop Visual Studio Color Theme Editor PowerCommands for Visual Studio 2010 Extension Analyzer CodeCompare Team Founder Server Power Tools VS10x Selection Popup Color Picker Completion Numbered Bookmarks   Technorati Tags: Visual Studio,Extensions

  Read the article

• Retrieving Custom Attributes Using Reflection

  - by Scott Dorman

  The .NET Framework allows you to easily add metadata to your classes by using attributes. These attributes can be ones that the .NET Framework already provides, of which there are over 300, or you can create your own. Using reflection, the ways to retrieve the custom attributes of a type are: System.Reflection.MemberInfo public abstract object[] GetCustomAttributes(bool inherit); public abstract object[] GetCustomAttributes(Type attributeType, bool inherit); public abstract bool IsDefined(Type attributeType, bool inherit); System.Attribute public static Attribute[] GetCustomAttributes(MemberInfo member, bool inherit); public static bool IsDefined(MemberInfo element, Type attributeType, bool inherit); If you take the following simple class hierarchy: public abstract class BaseClass { private bool result;   [DefaultValue(false)] public virtual bool SimpleProperty { get { return this.result; } set { this.result = value; } } }   public class DerivedClass : BaseClass { public override bool SimpleProperty { get { return true; } set { base.SimpleProperty = value; } } } Given a PropertyInfo object (which is derived from MemberInfo, and represents a propery in reflection), you might expect that these methods would return the same result. Unfortunately, that isn’t the case. The MemberInfo methods strictly reflect the metadata definitions, ignoring the inherit parameter and not searching the inheritance chain when used with a PropertyInfo, EventInfo, or ParameterInfo object. It also returns all custom attribute instances, including those that don’t inherit from System.Attribute. The Attribute methods are closer to the implied behavior of the language (and probably closer to what you would naturally expect). They do respect the inherit parameter for PropertyInfo, EventInfo, and ParameterInfo objects and search the implied inheritance chain defined by the associated methods (in this case, the property accessors). These methods also only return custom attributes that inherit from System.Attribute. This is a fairly subtle difference that can produce very unexpected results if you aren’t careful. For example, to retrieve the custom  attributes defined on SimpleProperty, you could use code similar to this: PropertyInfo info = typeof(DerivedClass).GetProperty("SimpleProperty"); var attributeList1 = info.GetCustomAttributes(typeof(DefaultValueAttribute), true)); var attributeList2 = Attribute.GetCustomAttributes(info, typeof(DefaultValueAttribute), true));   The attributeList1 array will be empty while the attributeList2 array will contain the attribute instance, as expected. Technorati Tags: Reflection,Custom Attributes,PropertyInfo

  Read the article

• Do certain corporations hold more weight on a resume?

  - by Ryan

  Would a developer/tester position at Google, Apple, Microsoft, etc. (any large tech. company of which most people have heard) be more valuable on a resume than working as a developer/tester somewhere where tech. isn't the main objective (shipping company, restaurant chain, insurance company, etc.)? Let's say you have two offers, and you only plan to stay with whichever company for 5 years, before trying to get a better position at a different company. One at Google that has a starting salary of $60,000, and one at some insurance company that has a starting salary of $80,000. I guess what I'm trying to say is... with university's, if someone graduates from MIT or Carnegie Mellon, they can pretty much get a job anywhere. Does someone seem more valuable after having worked at a company like Google, Apple, Microsoft, etc.? In other words, would taking the lower paying job be better in the long run since it's at Google, or would it be better to take the higher paying job at the insurance company?

  Read the article

• Mobile app technology choice - popularity trend data?

  - by Ryan Weir

  I'm familiar with the arguments for HTML5 apps over native, but was looking for some numbers or data to indicate a trend of how popular they are relative to each other for mobile app development. E.g. Surveys among programmers, data collected from the various app stores, number of downloads of development tools for those platforms. Your source could consider new apps, existing apps, categorized by downloads, app downloads weighted by popularity - basically any source you've got I would like to see. In my own personal monkey-sphere of developers, HTML5 seems to be starting to dominate as of about 6 months ago over iOS and Android by a wide margin as the technology stack preference - so I was wondering if this reflects a trend that's been measured globally and if there was objective data to support it.

  Read the article

• What's going on with my wireless?

  - by Mark Scott

  The WiFi on my Acer laptop (it's a 3810TZ, with Intel Corporation Centrino Wireless-N 1000) works flawlessly on Ubuntu 11.04. On 11.10, it's continually up and down, and it fills the system log with messages such as those below. What is going on? It seems to be unable to decide which regulatory domain it's in. Despite the system configuration being quite clearly set to UK it persists in configuring itself as though it was opeating in Taiwan! Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: WPA: 4-Way Handshake failed - pre-shared key may be incorrect Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:50:7f:72:bf:b0 reason=15 Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=3 Nov 22 15:34:37 MES3810 kernel: [18239.240355] cfg80211: All devices are disconnected, going to restore regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240362] cfg80211: Restoring regulatory settings Nov 22 15:34:37 MES3810 kernel: [18239.240368] cfg80211: Calling CRDA to update world regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.240408] wlan0: deauthenticating from 00:50:7f:72:bf:b0 by local choice (reason=3) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: 4-way handshake - disconnected Nov 22 15:34:37 MES3810 kernel: [18239.246556] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Nov 22 15:34:37 MES3810 kernel: [18239.246563] cfg80211: World regulatory domain updated: Nov 22 15:34:37 MES3810 kernel: [18239.246567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.246572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246577] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246587] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.246592] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: disconnected - scanning Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to authenticate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: scanning - authenticating Nov 22 15:34:37 MES3810 kernel: [18239.509877] wlan0: authenticate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Trying to associate with 00:50:7f:72:bf:b0 (SSID='PoplarHouse' freq=2412 MHz) Nov 22 15:34:37 MES3810 kernel: [18239.512276] wlan0: authenticated Nov 22 15:34:37 MES3810 kernel: [18239.512615] wlan0: associate with 00:50:7f:72:bf:b0 (try 1) Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: authenticating - associating Nov 22 15:34:37 MES3810 kernel: [18239.516508] wlan0: RX ReassocResp from 00:50:7f:72:bf:b0 (capab=0x431 status=0 aid=1) Nov 22 15:34:37 MES3810 kernel: [18239.516514] wlan0: associated Nov 22 15:34:37 MES3810 wpa_supplicant[1053]: Associated with 00:50:7f:72:bf:b0 Nov 22 15:34:37 MES3810 kernel: [18239.529097] cfg80211: Calling CRDA for country: TW Nov 22 15:34:37 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associating - associated Nov 22 15:34:37 MES3810 kernel: [18239.535680] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535688] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535692] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535697] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535702] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535711] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535716] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535720] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535730] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535739] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535744] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535748] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535753] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535757] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535763] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535767] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535772] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535777] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: Nov 22 15:34:37 MES3810 kernel: [18239.535782] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535786] cfg80211: Disabling freq 2467 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535789] cfg80211: Disabling freq 2472 MHz Nov 22 15:34:37 MES3810 kernel: [18239.535794] cfg80211: Regulatory domain changed to country: TW Nov 22 15:34:37 MES3810 kernel: [18239.535797] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Nov 22 15:34:37 MES3810 kernel: [18239.535802] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535807] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Nov 22 15:34:37 MES3810 kernel: [18239.535812] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Nov 22 15:34:38 MES3810 NetworkManager[875]: (wlan0): supplicant interface state: associated - 4-way handshake Any ideas?

  Read the article

• Mailbox move issue from Exchange 2003 to Exchange 2010

  - by Ryan Roussel

  Today while moving mailboxes between Exchange 2003 and Exchange 2010, I hit an issue with a couple of mailboxes.  These mailboxes all popped access denied errors or more exactly: Insufficient Access Rights to perform the operation.   The cause was similar to the mail flow issue in that inheritable permissions were not turned on for the user object in Active Directory.  This also presented it’s own unique problem in that since the initial move request failed because of permissions, it had to be cleared before a new move request could be created. On top of that, the request did not show up in the EMC.  I used the following process to clear the request, assign permission, then create a new request:   1. First you need to know the ExchangeGUID of the mailbox for the remove-moverequest command.  To quickly get the GUID for a mailbox simply run:         2. Next we need to clear out the move request using PowerShell by running: [PS] c:\>Remove-moverequest -moverequestqueue "mailbox database 1030639620" -mailboxguid 8525686f-d4d3-42b7-92f1-46d77ea841a3   3. Then to re-establish inheritable permissions. This can be done by using AD Users and Computers, switching to View Advanced Features, then under the Security tab of the object.  Click Advanced, then check “allow inheritable permissions of parent to propagate to this object”   4. Once the Inheritable permissions are restored, we need to create a new move request: NOTE:  The EMC can also be used to initiate the Move Request once the permissions are corrected. [PS] c:\>New-moverequest –identity jyoung  -baditemlimit 100 -targetdatabase "mailbox database 1030639620"   And that’s it.  The mailbox should move over smoothly with no access denied error.

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >