Search Results

Search found 654 results on 27 pages for 'toshiba satellite'.

Page 12/27 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

  • Alternative Bluetooth Stacks for Windows 7 64bit

    - by Martin
    I have a notebook with an inbuilt Broadcom BCM2046 bluetooth adapter and several bluetooth HID-devices (mice, keyboards etc.) The operating system is Windows 7 64 bit Professional. The HID-devices all work perfectly with other computers, but on the system mentionend above, problems with some power-saving features inside the HID-devices occur (see eg. Amazon reviews for Microsoft Mobile Keyboard 6000 not waking up). I have tried the bluetooth drivers supplied by Windows update and the latest Broadcom drivers directly from the Broadcom updater software. The problems persist (I can rule out any further configuration issues or alternative device drivers, I have tried every possibility). I have tried a trial version of the BlueSoleil Bluetooth stack and it solved the wake-up problem. However the BlueSoleil stack causes some other problems, is relatively expensive and I would prefer not to use it. My question: are there any other alternative bluetooth stacks availible for Windows 7 64bit? To my knowledge there used to be Toshiba Bluetooth stack for non-Toshiba hardware, but the older versions I have found on the internet do not install, they do not seem to recognize the bluetooth hardware when installing the driver.

    Read the article

  • Where did my backup files go? Can they be recovered?

    - by Ken
    I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

    Read the article

  • Same source, multiple targets with different resources (Visual Studio .Net 2008)

    - by Mike Bell
    A set of software products differ only by their resource strings, binary resources, and by the strings / graphics / product keys used by their Visual Studio Setup projects. What is the best way to create, organize, and maintain them? i.e. All the products essentially consist of the same core functionality customized by graphics, strings, and other resource data to form each product. Imagine you are creating a set of products like "Excel for Bankers", Excel for Gardeners", "Excel for CEOs", etc. Each product has the the same functionality, but differs in name, graphics, help files, included templates etc. The environment in which these are being built is: vanilla Windows.Forms / Visual Studio 2008 / C# / .Net. The ideal solution would be easy to maintain. e.g. If I introduce a new string / new resource projects I haven't added the resource to should fail at compile time, not run time. (And subsequent localization of the products should also be feasible). Hopefully I've missed the blindingly-obvious and easy way of doing all this. What is it? ============ Clarification(s) ================ By "product" I mean the package of software that gets installed by the installer and sold to the end user. Currently I have one solution, consisting of multiple projects, (including a Setup project), which builds a set of assemblies and create a single installer. What I need to produce are multiple products/installers, all with similar functionality, which are built from the same set of assemblies but differ in the set of resources used by one of the assemblies. What's the best way of doing this? ------------ The 95% Solution ----------------- Based upon Daminen_the_unbeliever's answer, a resource file per configuration can be achieved as follows: Create a class library project ("Satellite"). Delete the default .cs file and add a folder ("Default") Create a resource file in the folder "MyResources" Properties - set CustomToolNamespace to something appropriate (e.g. "XXX") Make sure the access modifier for the resources is "Public". Add the resources. Edit the source code. Refer to the resources in your code as XXX.MyResources.ResourceName) Create Configurations for each product variant ("ConfigN") For each product variant, create a folder ("VariantN") Copy and Paste the MyResources file into each VariantN folder Unload the "Satellite" project, and edit the .csproj file For each "VariantN/MyResources" <Compile> or <EmbeddedResource> tag, add a Condition="'$(Configuration)' == 'ConfigN'" attribute. Save, Reload the .csproj, and you're done... This creates a per-configuration resource file, which can (presumably) be further localized. Compile error messages are produced for any configuration that where a a resource is missing. The resource files can be localized using the standard method (create a second resources file (MyResources.fr.resx) and edit .csproj as before). The reason this is a 95% solution is that resources used to initialize forms (e.g. Form Titles, button texts) can't be easily handled in the same manner - the easiest approach seems to be to overwrite these with values from the satellite assembly.

    Read the article

  • Programming an IPTV application- Client/Server

    - by Sumit Ghosh
    I am part of a team which has been given a task to deploy an IPTV solution for a company. The system has been architect-ed like this. There is Video capture card , which receives satellite signals from a satellite receiver. This video capture card is part of a windows 7 machine. The signals need to be trans coded here and passed to a streaming server which will be received by end users. The end users will be desktop users having a C#.NET application installed to view the channels. I am confused at the choice of server software as I have multiple choices - Windows Media Server, VideoLan (VLC project), or Flash Media Server, it also supports MPEG-2 HD. My main aim to be able to stream MPEG-2 channels with HD quality and encrypt the channels at the server end so that the streams can be protected. I know reversing is possible but it wont be easy as for every naive user with wireshark snooping my streams. If any of you here has ever done such an implementation please do suggest me the best technologies I should go for. Iam open to C#,C++ and other similar languages. Any help shall be deeply appreciated. edit: End Users shall be part of Internet and not necessarily a lan, reason for this question is internet doesn't support multicast like Lan, so I need some suggestions.

    Read the article

  • Touchpad mouse problem

    - by megatr0n
    Hi all. I have a toshiba satellite and its been behaving weirdly. It only works at the password prompt screen to logon but as soon as I am logged in, it just stops working. Left nor right button clicks are working. I am running vista home. Any pointers on how to go about this? Thanks.

    Read the article

  • OpenVPN, Great on Windows, VERY slow on Mac...

    - by Phsion
    Hello, I'm not really an IT Pro, but this seemed like the best place to ask this question... I have setup VPN networks in the past, for fun, and everything was great, but now I've set one up for my boss, and while my computers all work great, his Mac machines are almost too slow to work with. Its pretty much vanilla configs all around, anyone have any ideas? Its a TUN routing setup over UDP. Back Story: My boss travels a lot, and wants to be able to access all his files from the road, and is also pretty paranoid about security (even though knows almost nothing about computers). SO i figured a VPN would be the answer. I went with OpenVPN, but there are some other issues. The only ISP we can get in our area besides Dial-UP is a crappy Satellite provider, that doesn't offer public IPs unless your willing to pay, so while the computers and VPN setup are pretty vanilla, the routing and structure is strange to get around this limitation. Specs: Its OpenVPN2, and there are six machines using it (only three actually use it, the rest are my test machines), one Windows 7 laptop, two XP Desktops, one OS X 10.5 Desktop, one 10.6 Desktop, and one 10.6 Laptop. One XP Desktop sits at my house and acts as the server (6Mbs/2Mbs FIOS connection). One XP desktop sits at the office and hosts a webpage that will wake up the Main Mac Desktop from sleep, and also ping all the machines on the VPN and show their status. The main office mac (10.6) stays in sleep mode until it gets the Wake-On-Lan packet from the Office XP, and then it auto connects to the VPN and opens itself up. The reason for all this is the Satellite private IP crap means i cant directly access the office machines outside of the LAN, so everyone connects to my house first, then they talk to each other from there. The Wake On Lan weirdness is because my boss doesn't want to leave the main Mac on all the time, and making a quick and dirty webpage was the easiest way to send a Magic Packet from inside the LAN without confusing my boss. The VPN uses Client Config files to make static IPs for the client. The only thing i found in google was some changes to the VPN MTU settings (down to 1400) but no real help. Oh, and i forgot...all the windows machines just have OpenVPN start as a service. The Mac laptop uses tunnelblick (an OpenVPN GUI) and the Mac Desktops use OpenVPN in normal command line mode. Server Config: tun-mtu 1500 fragment 1450 mssfix 1450 management localhost #### port #### proto udp dev tun ca ####### cert ####### key ###### dh ###### server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-config-dir ccd route 10.8.0.0 255.255.255.252 client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status log Client Configs (all are simple variations on this) tun-mtu 1500 fragment 1450 mssfix 1450 client dev tun proto udp remote ######## #### resolv-retry infinite nobind persist-key presist-tun ca ##### cert ##### key ##### ns-cert-type server comp-lzo verb 3

    Read the article

  • Forward all traffic through an ssh tunnel

    - by Eamorr
    I hope someone can follow this and I'll explain as best I can. I'm trying to forward all traffic from port 6999 on x.x.x.224, through an ssh tunnel, and onto port 7000 on x.x.x.218. Here is some ASCII art: |browser|-----|Squid on x.x.x.224|------|ssh tunnel|------<satellite link>-----|Squid on x.x.x.218|-----|www| 3128 6999 7000 80 When I remove the ssh tunnel, everything works fine. The idea is to turn off encryption on the ssh tunnel (to save bandwidth) and turn on maximum compression (to save more bandwidth). This is because it's a satellite link. Here's the ssh tunnel I've been using: ssh -C -f -C -o CompressionLevel=9 -o Cipher=none [email protected] -L 7000:172.16.1.224:6999 -N The trouble is, I don't know how to get data from Squid on x.x.x.224 into the ssh tunnel? Am I going about this the wrong way? Should I create an ssh tunnel on x.x.x.218? I use iptables to stop squid on x.x.x.224 from reading port 80, but to feed from port 6999 instead (i.e. via the ssh tunnel). Do I need another iptables rule? Any comments greatly appreciated. Many thanks in advance, Regarding Eduardo Ivanec's question, here is a netstat -i any port 7000 -nn dump from x.x.x.218: 14:42:15.386462 IP 172.16.1.224.40006 > 172.16.1.218.7000: Flags [S], seq 2804513708, win 14600, options [mss 1460,sackOK,TS val 86702647 ecr 0,nop,wscale 4], length 0 14:42:15.386690 IP 172.16.1.218.7000 > 172.16.1.224.40006: Flags [R.], seq 0, ack 2804513709, win 0, length 0 Update 2: When I run the second command, I get the following error in my browser: ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://109.123.109.205/index.php Zero Sized Reply Squid did not receive any data for this request. Your cache administrator is webmaster. Generated Fri, 01 Jul 2011 16:06:06 GMT by remote-site (squid/2.7.STABLE9) remote-site is 172.16.1.224 When I do a tcpdump -i any port 7000 -nn I get the following: root@remote-site:~# tcpdump -i any port 7000 -nn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused channel 2: open failed: connect failed: Connection refused

    Read the article

  • To make use of 5.1 sound do i need a 5.1 headphone/speaker?

    - by Fellknight
    I recently bought a Toshiba X500 laptop with decent speakers & sound card in it. I want to use headphones but im unsure if they also need to have the same audio channels as the sound card (5.1 in this case). Also The laptop itself only has the two standard sound ports - headphones and microphone, does 5.1 headphones require a special kind of connection?.

    Read the article

  • certain thumbdrives keep a system from going out of the boot screen

    - by The Journeyman geek
    I have an old r51 which i boot off usb. Apparently, if i have a toshiba 2gb thumbdrive similar to this plugged in, or an old imation 1gb drive plugged in, it won't boot at all- it freezes in the bios loading screen until its unplugged. I need to try it on another system but i'm wondering what could be causing it- since i suppose this is at a lower level than filesystem, and the drives work fine otherwise - even being readable if inserted after the system is booted from another source, with neither drive plugged in

    Read the article

  • How to partition a Flash Drive?

    - by Nrew
    Do you know of any way on how to partition a flash drive. Specifically an 8gb toshiba flash drive. I have tried using lexar usb format:http://tinyurl.com/m7qkbw But there was no luck, Do yo know of any application that could do flash drive partitioning. I really wanted to have a bootable flash drive but can still store my files on a different partition.

    Read the article

  • Windows XP blue screen 0x8E error troubleshooting

    - by dotnet-practitioner
    I get following blue screen after running my laptop for an hour... A problem has been detected and windows has been shut down to prevent damage to your computer. [...] Technical Information: *** STOP 0x0000008E (0xc0000005, 0x805B03F5, 0xF703DC7C, 0x00000000) [...] So how can I tell if this is faulty memory or some other hardware problem? My laptop is a Toshiba Satellite A45-S250.

    Read the article

  • Phone system for 55 size firm

    - by Hemal
    Hello, We are in the process of upgrading our 11 years old PBX system and looking for options like Panasonic, Avaya, Toshiba etc. We welcome any suggestions/features/product models to look for 55+ size firm... Thank you in advance for any replies...

    Read the article

  • New laptop, windows 7, Outlook 2007 installed

    - by Bob
    A friend of mine has purchased a new laptop (Toshiba) with Windows 7 installed and has also purchased Outlook 2007 and atttmped to install it - the install worked ok, but I think he may have selected Exchange server when installing the first time - now it will not start, displaying message like "Your Microsoft Exchange Server is unavailable " Outlook 2007 should have been configued for Pop3 as he has a hotmail account, but Outlook will not load "offline" and despite me de-installing, re-installing, running repair, I cannot get it to load to a point where I can add a new email account. If any one has any ideas on this, I would apprecaite the help Thanks, Bob

    Read the article

  • New laptop, windows 7, Outlook 2007 installed

    - by Bob
    A friend of mine has purchased a new laptop (Toshiba) with Windows 7 installed and has also purchased Outlook 2007 and atttmped to install it - the install worked ok, but I think he may have selected Exchange server when installing the first time - now it will not start, displaying message like "Your Microsoft Exchange Server is unavailable " Outlook 2007 should have been configued for Pop3 as he has a hotmail account, but Outlook will not load "offline" and despite me de-installing, re-installing, running repair, I cannot get it to load to a point where I can add a new email account. If any one has any ideas on this, I would apprecaite the help Thanks, Bob

    Read the article

  • Are flash drives always bootable?

    - by user23950
    I have this 8 gb toshiba flash drive and my motherboard also allows booting from removable devices. But I don't know, I've already tried to make the fd bootable and set in the bios to boot from fd. But it doesn't work. Are flash drives always bootable?

    Read the article

  • Very Quiet Sound

    - by radarlistener
    I have a Toshiba Tecra A9 that has very, very quiet sound. This is not only in Windows XP but in Ubuntu too. I have re-installed the drivers but it's still quiet. What can I do to fix this?

    Read the article

  • What hardware combonation is better one with a i7-720QM processor and GeForce 310M graphics or one w

    - by Mason
    I am looking for a new laptop and the two i am deciding between is an Asus with Intel® Core™ i5-430M processor and NVIDIA GeForce GTS 360M graphics. Or a Toshiba with the Intel® Core™ i7-720QM processor and NVIDIA GeForce 310M graphics. I am looking for a computer to use for college and be able to play games on. I want to know what one I should get they are both the same price.

    Read the article

  • How can I find out which service is keeping Vista from restarting?

    - by Jeff
    Running Vista on my Toshiba laptop for several years now. Recently, I noticed it will not restart - I have to power cycle it. I have enabled Verbose Status messages, so I know it's stuck at "Stopping services". Is there a way to figure out which service is not stopping? I'm hoping for some kind of log like the bootlog. I've tried looking through the event viewer - no luck there.

    Read the article

  • Program to set time on local computer using GPS data

    - by dmkerr
    I have a laptop running Windows XP that does not connect to the Internet and I would like to use a USB GPS receiver as a time source to set the clock. Generally, the laptop will not have access to the open sky so getting a strong, multi-satellite connection is not likely. Ideally, I would like to be able to have the program detect the GPS receiver and set the clock without intervention from the user. Is what I'm seeking even feasible?

    Read the article

  • my windows 7 laptop wont load past the windows logo

    - by lilpimp
    my computer wont load past the windows logo, when it finishing loading the logo i see a blue screen quickly flashes on and off just a glimpse of it but i recognise that sreen anywhere i know its a serious error message screen, after that it just shows a black screen with a movable cursor, i've tried to repair, load last good configuration, but nothing seems to work, i'm running windows 7, its a toshiba laptop, 4 GB SDRAM, 320 GB HDD, Intel Pentium Processor T4200, dual core processor.

    Read the article

  • Proper Drivers for 10.10 Realtek RTL8176 Wireless and Synaptic V7.2 Touchpad Devices

    - by av7000
    I have a new Toshiba Satellite L645-S4059. This is an Intel i3 64 bit machine. Two problems have occurred that I would like to fix before transferring my work from my old compaq laptop. First I can't get the wireless driver to work properly. I went to the realtek driver site and couldn't find the 8176. Instead I was shuttled to the 8188 which uses a 8192 software release. I am not sure if the kernel is just missing the name. Second I have a synaptics V7.2 touchpad which is just flaky. It eventually freezes up so I am just using a USB mouse. Appreciate anybody's experience on this.

    Read the article

  • Rob Blackwell on interoperability and Azure

    - by Eric Nelson
    At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

    Read the article

  • Streaming in justin.tv using Ubuntu 11.10

    - by Orlando Gonzales
    I used to streaming videos in justin.tv..using Windows 7 and I had no problems. But a month ago, I installed Ubuntu 11.10 (32 bits) in my notebook and now I can't streaming videos. The problem is that when I click on the button "Go Live!", it´s supposed that the screen where I have to clic on "Allow" it should appear, but it doesn't. The web only displays the message: "You can't start until you click allow below.", but the "allow button" doesn't appear, instead of that I only see a black screen. I guessed that it was a problem with the Adobe Flash Player, but I have the lastest version for Linux installed and I have no problems with Youtube. Also, my webcam works without problem in others Ubuntu's applications. I hope you can help me. This are my notebook's features: Toshiba Satellite C645-SP4135L / 3GB RAM / Intel Core i3-2310M 2.10GHz x 4 / HHD:320GB Thanks!! Orlando

    Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >