Search Results

Search found 2143 results on 86 pages for 'vpn'.

Page 12/86 | < Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >

• Cisco ASA Site-to-Site VPN Dropping

  - by ScottAdair

  I have three sites, Toronto (1.1.1.1), Mississauga (2.2.2.2) and San Francisco (3.3.3.3). All three sites have ASA 5520. All the sites are connected together with two site-to-site VPN links between each other location. My issue is that the tunnel between Toronto and San Francisco is very unstable, dropping every 40 min to 60 mins. The tunnel between Toronto and Mississauga (which is configured in the same manner) is fine with no drops. I also noticed that my pings with drop but the ASA thinks that the tunnel is still up and running. Here is the configuration of the tunnel. Toronto (1.1.1.1) crypto map Outside_map 1 match address Outside_cryptomap crypto map Outside_map 1 set peer 3.3.3.3 crypto map Outside_map 1 set ikev1 transform-set ESP-AES-256-MD5 ESP-AES-256-SHA crypto map Outside_map 1 set ikev2 ipsec-proposal AES256 group-policy GroupPolicy_3.3.3.3 internal group-policy GroupPolicy_3.3.3.3 attributes vpn-idle-timeout none vpn-tunnel-protocol ikev1 ikev2 tunnel-group 3.3.3.3 type ipsec-l2l tunnel-group 3.3.3.3 general-attributes default-group-policy GroupPolicy_3.3.3.3 tunnel-group 3.3.3.3 ipsec-attributes ikev1 pre-shared-key ***** isakmp keepalive disable ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** San Francisco (3.3.3.3) crypto map Outside_map0 2 match address Outside_cryptomap_1 crypto map Outside_map0 2 set peer 1.1.1.1 crypto map Outside_map0 2 set ikev1 transform-set ESP-AES-256-MD5 ESP-AES-256-SHA crypto map Outside_map0 2 set ikev2 ipsec-proposal AES256 group-policy GroupPolicy_1.1.1.1 internal group-policy GroupPolicy_1.1.1.1 attributes vpn-idle-timeout none vpn-tunnel-protocol ikev1 ikev2 tunnel-group 1.1.1.1 type ipsec-l2l tunnel-group 1.1.1.1 general-attributes default-group-policy GroupPolicy_1.1.1.1 tunnel-group 1.1.1.1 ipsec-attributes ikev1 pre-shared-key ***** isakmp keepalive disable ikev2 remote-authentication pre-shared-key ***** ikev2 local-authentication pre-shared-key ***** I'm at a loss. Any ideas?

  Read the article

• VPN and Bonjour conflicting

  - by JW.

  Does anyone know why a VPN connection might interfere with Apple's Bonjour? I've noticed that my Mac and various iDevices have trouble finding each other on my local network, when I have VPN connections open. Things like Home Sharing and Wi-Fi Sync work some of the time, but sometimes fail to find the other device. The VPN connections are made using IPSecuritas, which is a GUI around raccoon. I have the local "endpoint mode" set to Host. Apple mentions that Home Sharing may conflict with VPNs, but they don't specify why, or how to fix it. I'm using a Mac with OS 10.7.3 and IPSecuritas to connect to the VPN, an iPhone, and an iPad.

  Read the article

• Windows Server 2008 R2 - VPN Folder Sharing Permissions

  - by daveywc

  I have setup VPN access to my Windows Server 2008 R2 server using RRAS. Clients can connect, run applications, view shares etc. My problem is that one of the applications that they use relies on some network shares. The application is not able to access the shares unless the user first goes into Windows Explorer and accesses the share, providing their user name and password (the same one that they use to connect via the VPN). Previously on a different Windows Server 2008 (not R2) this was not necessary i.e. the application and user could access the share without providing another user name and password. I have tried giving the Everyone group full control over the shared folder - both on the Security tab and in the Permissions area under Advanced Sharing on the Sharing tab. This still did not resolve the issue. (I don't really want to give Everyone access anyway - I was hoping that granting access to a group that the VPN users had membership of would be enough). I have also turned off password protected sharing in the Advanced Sharing Settings area of the Network and Sharing Center (under both Home or Work and Public). So my question is what is preventing my VPN users from having access to these folders without having to re-supply the same login and password that they use to access the VPN? And what is the best practice in this type of scenario?

  Read the article

• Need to have access to my office PC from my laptop hopping through two VPN servers

  - by Andriy Yurchuk

  Here's the illustration of what I have ( http://clip2net.com/s/2fvar ): My office PC with it's IP of 123.45.e.f. Office VPN, which I will connect to from my VPS to get to my office PC. My own VPS, which I use as a: client to connect to office VPN (through vpnc, which creates a tun0 with 123.45.c.d IP address); VPN server my laptop can connect to (OpenVPN, tun1, 10.8.0.1) My own laptop I will use as a VPN client to connect to VPS OpenVPN server (will create a tun0 with 10.8.0.2 IP address) Now what I have to do is to allow my laptop to connect to at least my office PC, but preferably to all the 123.45.x.x subnet. Please advice on how to best configure OpenVPN, routing, iptables or whatever else is needed on my VPS so that my laptop could gain access to my office PC. P.S. The reason I'm hopping through my VPS is that being connected to the office WiFi I cannot access my office PC and I cannot connect to office VPN (which is another way to access my office PC). The only way to access my PC from office WiFi I have is hopping though an outside network.

  Read the article

• VPN trace route

  - by Jake

  I am inside an Active Directory (AD) domain and trying to trace route to another AD domain at a remote site, but supposedly connected by VPN in between. the local domain can be accessed at 192.168.3.x and the remote location 192.168.2.x. When I do a tracert, I am suprised to see that the results did not show the intermediate ISP nodes. If I used the public IP of the remote location, then a normal tracert going through every intermediate node would show. 1 <1 ms <1 ms <1 ms 192.168.3.1 2 1 ms <1 ms <1 ms 192.168.3.254 3 7 ms 7 ms 7 ms 212.31.2xx.xx 4 197 ms 201 ms 196 ms 62.6.1.2xx 5 201 ms 201 ms 210 ms vacc27.norwich.vpn-acc.bt.net [62.6.192.87] 6 209 ms 209 ms 209 ms 81.146.xxx.xx 7 209 ms 209 ms 209 ms COMPANYDOMAIN [192.168.2.6] Can someone explain how does this VPN tunnelling works? Does this mean VPN is technically faster than without?

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• IPSec tunnelling with ISA Server 2000...

  - by Izhido

  Believe it or not, our corporate network still uses ISA Server 2000 (in a Windows Server 2003 machine) to enable / control Internet access to / from it. I was asked recently to configure that ISA Server to create a site-to-site VPN for a new branch in a office about 25 km. away from it. The idea is basically to enable not only computers, but also Palm devices (WiFi-enabled, of course), to be able to see other computers in both sites. I was also told that a simple VPN-enabled wireless AP/router (in this case, a Cisco WRV210 unit) should be enough to establish communications with the main office. To be fair, the router looks easy to configure; it was confusing at first, but further understanding of how site-to-site VPNs work cleared all doubts about it. Now I need to make modifications to our ISA Server in order to recognize the newly installed & configured "remote" VPN site. Thing is, either my Googling skills are pathethically horrible, or there doesn't seem to be much (or any, at all) information about how to configure an ISA Server 2000 for this purpose. Lots of stuff on 2004, of course; also, I think I saw something for 2006. But nothing I could find about 2000. Reading about 2004, it seems that the only way I can do site-on-site with a Cisco router (read: a non-ISA-Server machine) is through something they call a "IPSec tunnel". Fair enough. However, I can't figure for the life of me how could I even start to find, leave alone configure, such a thing. Do you, people, happen to know how to do IPSec tunelling on a ISA Server 2000, so I can connect to a Cisco WRV210 VPN-enabled router, and build a site-to-site VPN for both networks? Or is this not possible at all? (Meaning I should change anything in this configuration to make it work...)

  Read the article

• Juniper SSG 5 VPN

  - by Ethabelle

  I have a host who set up our Juniper SSG 5 VPN with Firmware version-6.2.0r5.0 I've been trying to set up VPN on it using this guide: http://kb.juniper.net/InfoCenter/index?page=content&id=KB4094 I've followed the steps and on my Mac, whenever I try to connect using L2TP over IPSec I get the following error; Summary of Steps: Create User (give them L2TP auth ability), Create Group, Place User in Group, Create VPN Gateway, Create VPN, create IP Pool, change default L2TP settings, create Untrust Trust Policy. The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator. I looked in my Firewall's logs, but I don't even see anything under Reports Logs Events. I'm.. obviously missing something, I just don't know what I'm missing at this point. I'm just starting networking and this is sort of Step 101 and I'm getting annoyed and just want to throw up OpenVPN, but I've read that has problems with Juniper Firewalls. Hooray.

  Read the article

• VPN Setup: Mac OS X and SonicWall

  - by noloader

  I'm trying to get VPN access up and running. The company has a SonicWall firewall/concentrator and I'm working on a Mac. I'm not sure of the SonicWall's hardware or software level. My MacBook Pro is OS X 10.8, x64, fully patched. The Mac Networking applet claims the remote server is not responding. The connection attempt subsequently fails: This is utter bullshit, as a Wireshark trace shows the Protected Mode negotiation, and then the fallback to Quick Mode: I have two questions (1) does Mac OS X VPN work in real life? (2) Are there any trustworthy (non-Apple) tools to test and diagnose the connection problem (Wireshark is a cannon and I have to interpret the results)? And a third question (off topic): what is broken in Cupertino such that so much broken software gets past their QA department? EDIT (12/14/2012): The network guy sent me "VPN Configuration Guide" (Equinox document SonicOS_Standard-6-EN). It seems an IPSec VPN now requires a Firewall Unique Identifier. Just to be sure, I revisited RFC 2409, where Main Mode, Aggressive Mode, and Quick Mode are discussed. I cannot find a reference to Firewall Unique Identifier. I think I am screwed here: I am trying to connect to a broken (non-standard) firewall, with a broken Mac OS X client. Fortunately, I can purchase VPN Tracker Personal (a {SonicWall|Equinox}-authored client) for $129US from Equinox. So much for standards....

  Read the article

• Emulate a VPN through ssh

  - by Ian

  I have a Linux server running ubuntu 10.04 server. I would like to tunnel my iPhone traffic through this server using ssh, but that's not such an easy solution. Is there a way to simulate a VPN over ssh so that I can configure my iPhone to connect to this VPN and protect my traffic? I know I could set up a real VPN server but it looks kind of complicated and "expensive" (resources I mean). Any ideas? Thanks!

  Read the article

• Why the VPN Network Shake-Up?

  - by Brent Arias

  I can RDP to another machine on my home network, only if I'm not also hooked up to my employer's VPN with the Cisco VPN client. Indeed, I can't even ping the other machine by name in this mode, because ICMP suddenly thinks that ( ping myMachine ) now means ( ping myMachine.myEmployer.com ). Of course there is no machine by that latter name, and so it fails. Even weirder, once I disconnect from the VPN I can again ping myMachine successfully, but ICMP reports the machine by its MAC address instead of its IP address. I don't think I've ever seen ping identify another machine by its MAC address. So two questions: How can I access via RDP/ping the other machine BY NAME on my local network while also connected to the VPN? Why is ping identifying a MAC address for the machine on my home network, instead of an IP address? And how can I change this so that an IP address is reported instead? For question #1, I can indeed access the other machine on my home network by IP address. I suspect if I put the name-IP pair into my HOSTS file, then I would be able to access it even when connected to the VPN. But I wonder if there is another (more elegant) solution?

  Read the article

• RDP over VPN only

  - by shiva

  I know this question has been asked many a times here. But i want to gain certain perspective here. I have enabled VPN on certain systems and then can access remote system using rdp. However they can access the remote system without rdp as well. Is this because all these systems are in same lan group? How can i ensure that rdp works only when connected to vpn? I am looking at one vpn system and people should log into that system and then connect to vpn and then access remote system using rdp. I know that this can be achieved but i am not sure how to go about it. please guide me

  Read the article

• Avoid blocked URL's when on VPN from home

  - by Marcus

  When I'm on my home PC and on my company VPN I can't get to sites that my company blocks. Is there a way to get around this? Why do my requests to facebook.com go through the VPN? Can you configure your system to, for instance, not go through the VPN for HTTP traffic?

  Read the article

• Is it possible to nest VPN connections?

  - by Tie-fighter

  Is it possible to create an VPN connection while using site-to-site VPN? Also see: http://serverfault.com/questions/126537/is-it-possible-to-use-microsofts-secure-connection-rules-ipsec-with-vpn

  Read the article

• VPN connection sharing for Ubuntu guest

  - by pzico

  I have Ubuntu 10.04 guest on Windows XP host. I need to use a specific VPN software that works only on Windows. How should I configure virtualbox/guest so that the VPN connection would be visible on guest? I already tried NAT and bridged network settings. With both of these options I get only normal internet connection to work, but sites requiring VPN don't work on guest, only on host.

  Read the article

• How do I remove/uninstall a corporate VPN?

  - by Metro Smurf

  I have a corporate VPN installed on one of my Windows XP systems that I'd like to completely uninstall. There are no programs listed in the add/remove programs dialog matching the corporate VPN name or similar. I can find the VPN being launched from here: C:\Documents and Settings\All Users\Application Data\Microsoft\Network\Connections\Cm\<Company Name> I can see the VPN connection under network connections: Name Type Device Name Connection Manager ------------------- Connection to <Company Name> Connection Manger WAM Miniport (PPTP) Do I just need to delete the connection from Network Connections? And delete the directory? Or?

  Read the article

• iptables to block non-VPN-traffic if not through tun0

  - by dacrow

  I have a dedicated Webserver running Debian 6 and some Apache, Tomcat, Asterisk and Mail-stuff. Now we needed to add VPN support for a special program. We installed OpenVPN and registered with a VPN provider. The connection works well and we have a virtual tun0 interface for tunneling. To archive the goal for only tunneling a single program through VPN, we start the program with sudo -u username -g groupname command and added a iptables rule to mark all traffic coming from groupname iptables -t mangle -A OUTPUT -m owner --gid-owner groupname -j MARK --set-mark 42 Afterwards we tell iptables to to some SNAT and tell ip route to use special routing table for marked traffic packets. Problem: if the VPN failes, there is a chance that the special to-be-tunneled program communicates over the normal eth0 interface. Desired solution: All marked traffic should not be allowed to go directly through eth0, it has to go through tun0 first. I tried the following commands which didn't work: iptables -A OUTPUT -m owner --gid-owner groupname ! -o tun0 -j REJECT iptables -A OUTPUT -m owner --gid-owner groupname -o eth0 -j REJECT It might be the problem, that the above iptable-rules didn't work due to the fact, that the packets are first marked, then put into tun0 and then transmitted by eth0 while they are still marked.. I don't know how to de-mark them after in tun0 or to tell iptables, that all marked packet may pass eth0, if they where in tun0 before or if they going to the gateway of my VPN provider. Does someone has any idea to a solution? Some config infos: iptables -nL -v --line-numbers -t mangle Chain OUTPUT (policy ACCEPT 11M packets, 9798M bytes) num pkts bytes target prot opt in out source destination 1 591K 50M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 MARK set 0x2a 2 82812 6938K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 CONNMARK save iptables -nL -v --line-numbers -t nat Chain POSTROUTING (policy ACCEPT 393 packets, 23908 bytes) num pkts bytes target prot opt in out source destination 1 15 1052 SNAT all -- * tun0 0.0.0.0/0 0.0.0.0/0 mark match 0x2a to:VPN_IP ip rule add from all fwmark 42 lookup 42 ip route show table 42 default via VPN_IP dev tun0

  Read the article

• No Internet access while being connected to VPN using Cisco VPN Client 5.

  - by szeldon

  Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• iptables to block VPN-traffic if not through tun0

  - by dacrow

  I have a dedicated Webserver running Debian 6 and some Apache, Tomcat, Asterisk and Mail-stuff. Now we needed to add VPN support for a special program. We installed OpenVPN and registered with a VPN provider. The connection works well and we have a virtual tun0 interface for tunneling. To archive the goal for only tunneling a single program through VPN, we start the program with sudo -u username -g groupname command and added a iptables rule to mark all traffic coming from groupname iptables -t mangle -A OUTPUT -m owner --gid-owner groupname -j MARK --set-mark 42 Afterwards we tell iptables to to some SNAT and tell ip route to use special routing table for marked traffic packets. Problem: if the VPN failes, there is a chance that the special to-be-tunneled program communicates over the normal eth0 interface. Desired solution: All marked traffic should not be allowed to go directly through eth0, it has to go through tun0 first. I tried the following commands which didn't work: iptables -A OUTPUT -m owner --gid-owner groupname ! -o tun0 -j REJECT iptables -A OUTPUT -m owner --gid-owner groupname -o eth0 -j REJECT It might be the problem, that the above iptable-rules didn't work due to the fact, that the packets are first marked, then put into tun0 and then transmitted by eth0 while they are still marked.. I don't know how to de-mark them after in tun0 or to tell iptables, that all marked packet may pass eth0, if they where in tun0 before or if they going to the gateway of my VPN provider. Does someone has any idea to a solution? Some config infos: iptables -nL -v --line-numbers -t mangle Chain OUTPUT (policy ACCEPT 11M packets, 9798M bytes) num pkts bytes target prot opt in out source destination 1 591K 50M MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 MARK set 0x2a 2 82812 6938K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner GID match 1005 CONNMARK save iptables -nL -v --line-numbers -t nat Chain POSTROUTING (policy ACCEPT 393 packets, 23908 bytes) num pkts bytes target prot opt in out source destination 1 15 1052 SNAT all -- * tun0 0.0.0.0/0 0.0.0.0/0 mark match 0x2a to:VPN_IP ip rule add from all fwmark 42 lookup 42 ip route show table 42 default via VPN_IP dev tun0

  Read the article

• Auto login CISCO VPN client on linux [closed]

  - by user70704

  Hi, I have installed Cisco vpn client on my linux system (Fedora core 8). After login, every time, i need to run the following command VPNC to connect the VPN server. VPNC command request the input data from the user, IPSec gateway : IPSec ID: IPSec Secret: Username: Password: So, my requirement is, can i connect the VPN server through any single command?. I feel so lazy to enter the above requirements at every time. I want to connect the VPN Server on boot startup. I was try using expect script, but i can't. Thanks in advance.

  Read the article

• Windows 7 VPN stops web browser

  - by cantabilesoftware

  Hi, I've just installed Windows 7 RTM and setup Windows VPN to work office. It all works fine except, when the VPN is connected, regular web access stops working eg: local web browser can't connect to anything. Disconnect VPN and web works again. I've tried re-ordering the priorities of network adaptors with no luck. I'm not sure where to look next. Any ideas? Brad

  Read the article

• iPhone VPN to iTunes Home Sharing

  - by Philip Crumpton

  my goal is to set up a VPN on a Windows machine that contains my iTunes library then connect to that VPN with my iPhone and be able to utilize Home Sharing remotely. I have read that this can easily be set up if the iTunes library is on a Mac (Network Beacon and YazSoft ShareTool are two products I quickly found). I can't find anyone who has had success on a Windows machine, though. In my thinking, there are two options (aside from buying a Mac): 1.) Existing utility that takes care of this for me (like the Mac-only options listed above) and is compatible with iPhone (Hamachi is NOT compatible with iPhone VPN) 2.) Manually configure a VPN to allow Bonjour multicast (can't find any information on this) FYI my router is a Linksys WRT54GL running Tomato 1.28

  Read the article

• OpenSwan + xl2tpd VPN: How can I share Internet connection

  - by Michael

  I have an OpenSwan IPSec + L2TP VPN on Linux setup working from off of my server so I can connect to it from my laptop (roadwarrior setup). I am able to connect to the VPN remotely just fine, however the internet connection is not shared. I'm assuming there is some sort of masquerading I am supposed to be doing, but I have no idea how to go about doing that (iptables?). Any help getting this working so I can essentially use my VPN connection as a proxy would be great. Thanks

  Read the article

• Getting VPN to work from Virtual PC

  - by strobaek

  Setup: Host is running Windows7. Virtual PC is a Windows Server 2008 running under VMWare workstation 6.5. From the Host I have a VPN to e.g. TFS and other resources. From the VPC I need to connect to e.g. a SQL server via the VPN. My problem is, that I cannot get a connection from the VPC. If I'm sitting on the corporate network, all is working fine (but then I don't have the VPN). From home - where the VPN is required - it does not work. I have two network adapters defined/configued. One as BRIDGED and one as Host Only. IF I change the one being BRIDTED to NATS I have no connectivity at all from the VPC. I have no problems connecting from my host to the VPC. Thanks.

  Read the article

< Previous Page | 8 9 10 11 12 13 14 15 16 17 18 19  | Next Page >