Search Results

Search found 3788 results on 152 pages for 'pure equal'.

Page 122/152 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• SQL Server Index cost

  - by yellowstar

  I have read that one of the tradeoffs for adding table indexes in SQL Server is the increased cost of insert/update/delete queries to benefit the performance of select queries. I can conceptually understand what happens in the case of an insert because SQL Server has to write entries into each index matching the new rows, but update and delete are a little more murky to me because I can't quite wrap my head around what the database engine has to do. Let's take DELETE as an example and assume I have the following schema (pardon the pseudo-SQL) TABLE Foo col1 int ,col2 int ,col3 int ,col4 int PRIMARY KEY (col1,col2) INDEX IX_1 col3 INCLUDE col4 Now, if I issue the statement DELETE FROM Foo WHERE col1=12 AND col2 > 34 I understand what the engine must do to update the table (or clustered index if you prefer). The index is set up to make it easy to find the range of rows to be removed and do so. However, at this point it also needs to update IX_1 and the query that I gave it gives no obvious efficient way for the database engine to find the rows to update. Is it forced to do a full index scan at this point? Does the engine read the rows from the clustered index first and generate a smarter internal delete against the index? It might help me to wrap my head around this if I understood better what is going on under the hood, but I guess my real question is this. I have a database that is spending a significant amount of time in delete and I'm trying to figure out what I can do about it. When I display the execution plan for the deletion, it just shows an entry for "Clustered Index Delete" on table Foo which lists in the details section the other indices that need to be updated but I don't get any indication of the relative cost of these other indices. Are they all equal in this case? Is there some way that I can estimate the impact of removing one or more of these indices without having to actually try it?

  Read the article

• django url user id versus userprofile id problem

  - by dana

  hello there, i have a mini comunity where each user can search and find another user profile. Userprofile is a class model, indexed differently compared to user model class (user id is not equal to userprofile id) But i cannot see a user profile by typing in the url the corresponding id. I only see the profile of the currently logged in user. Why is that? I'd also want to have in my url the username (a primary key of the user table also) and NOT the id (a number). The guilty part of the code is: what can i replace that request.user with so that it wil actually display the user i searched for, and not the currently logged in? def profile_view(request, id): u = UserProfile.objects.get(pk=id) cv = UserProfile.objects.filter(created_by = request.user) blog = New.objects.filter(created_by = request.user) return render_to_response('profile/publicProfile.html', { 'u':u, 'cv':cv, 'blog':blog, }, context_instance=RequestContext(request)) in urls (of the accounts app): url(r'^profile_view/(?P<id>\d+)/$', profile_view, name='profile_view'), and in template: <h3>Recent Entries:</h3> {% load pagination_tags %} {% autopaginate list 10 %} {% paginate %} {% for object in list %} <li>{{ object.post }} <br /> Voted: {{ vote.count }} times.<br /> {% for reply in object.reply_set.all %} {{ reply.reply }} <br /> {% endfor %} <a href=''> {{ object.created_by }}</a> <br /> {{object.date}} <br /> <a href = "/vote/save_vote/{{object.id}}/">Vote this</a> <a href="/replies/save_reply/{{object.id}}/">Comment</a> </li> {% endfor %} thanks in advance!

  Read the article

• how is data stored at bit level according to "Endianness" ?

  - by bakra

  I read about Endianness and understood squat... so I wrote this main() { int k = 0xA5B9BF9F; BYTE *b = (BYTE*)&k; //value at *b is 9f b++; //value at *b is BF b++; //value at *b is B9 b++; //value at *b is A5 } k was equal to "A5 B9 BF 9F" and (byte)pointer "walk" o/p was "9F BF b9 A5" so I get it bytes are stored backwards...ok. ~ so now I thought how is it stored at BIT level... I means is "9f"(1001 1111) stored as "f9"(1111 1001)? so I wrote this int _tmain(int argc, _TCHAR* argv[]) { int k = 0xA5B9BF9F; void *ptr = &k; bool temp= TRUE; cout<<"ready or not here I come \n"< for(int i=0;i<32;i++) { temp = *( (bool*)ptr + i ); if( temp ) cout<<"1 "; if( !temp) cout<<"0 "; if(i==7||i==15||i==23) cout<<" - "; } } I get some random output even for nos. like "32" I dont get anything sensible. why ?

  Read the article

• assigning width to li

  - by badnaam

  I am using jquery ui tabs, which requires the tabs to be <li> elements, by default at least. I only need 2 tabs, but I am not able to size them so that they are both equal and take up 100% of available width of the ul. here is my code. <div id="intro_tabs" class="tabs"> <ul id="intro_nav"> <li> <h3><a href ="#tabs-1" class="null_link"><%= t('home.index.what_is_it') %></a></h3> </li> <li> <h3><a href ="#tabs-2" class="null_link"><%= t('home.index.how_works') %></a></h3> </li> </ul> <div id="tabs-1"> <%= simple_format t 'home.index.what_intro_details' %> </div> <div id="tabs-2"> <div id="intro_accordion"> <h3><a href="#">Users</a></h3> <div> <%= t 'home.index.how_intro_details_user' %> </div> <h3><a href="#">Merchants</a></h3> <div> <%= t 'home.index.how_intro_details_merchant' %> </div> </div> </div> </div> I have tried using css property width:50%, on both li's but it doesn't work. Thanks

  Read the article

• How to scan convert right edges and slopes less than one?

  - by Zachary

  I'm writing a program which will use scan conversion on triangles to fill in the pixels contained within the triangle. One thing that has me confused is how to determine the x increment for the right edge of the triangle, or for slopes less than or equal to one. Here is the code I have to handle left edges with a slope greater than one (obtained from Computer Graphics: Principles and Practice second edition): for(y=ymin;y<=ymax;y++) { edge.increment+=edge.numerator; if(edge.increment>edge.denominator) { edge.x++; edge.increment -= edge.denominator; } } The numerator is set from (xMax-xMin), and the denominator is set from (yMax-yMin)...which makes sense as it represents the slope of the line. As you move up the scan lines (represented by the y values). X is incremented by 1/(denomniator/numerator) ...which results in x having a whole part and a fractional part. If the fractional part is greater than one, then the x value has to be incremented by 1 (as shown in edge.incrementedge.denominator). This works fine for any left handed lines with a slope greater than one, but I'm having trouble generalizing it for any edge, and google-ing has proved fruitless. Does anyone know the algorithm for that?

  Read the article

• Php: Overriding abstract method goes wrong

  - by Lu4

  Hi! I think there is a problem in php's OOP implementation. EDIT: Consider more illustrative example: abstract class Animal { public $name; // public function Communicate(Animal $partner) {} // Works public abstract function Communicate(Animal $partner); // Gives error } class Panda extends Animal { public function Communicate(Panda $partner) { echo "Hi {$partner->name} I'm a Panda"; } } class Human extends Animal { public function Communicate(Human $partner) { echo "Hi {$partner->name} I'm a Human"; } } $john = new Human(); $john->name = 'John'; $mary = new Human(); $mary->name = 'Mary'; $john->Communicate($mary); // should be ok $zuzi = new Panda(); $zuzi->name = 'Zuzi'; $zuzi->Communicate($john); // should give error The problem is that when Animal::Communicate is an abstract method, php tells that the following methods are illegal: "public function Communicate(Panda $partner)" "public function Communicate(Human $partner)" but when Animal::Communicate is non-abstract but has zero-implementation Php thinks that these methods are legal. So in my opinion it's not right because we are doing override in both cases, and these both cases are equal, so it seems like it's a bug... Older part of the post: Please consider the following code: Framework.php namespace A { class Component { ... } abstract class Decorator { public abstract function Decorate(\A\Component $component); } } Implementation.php namespace B { class MyComponent extends \A\Component { ... } } MyDecorator.php namespace A { class MyDecorator extends Decorator { public function Decorate(\B\MyComponent $component) { ... } } } The following code gives error in MyDecorator.php telling Fatal error: Declaration of MyDecorator::Decorate() must be compatible with that of A\Decorator::Decorate() in MyDecorator.php on line ... But when I change the Framework.php::Decorator class to the following implementation: abstract class Decorator { public function Decorate(\A\Component $component) {} } the problem disappears.

  Read the article

• How to perform spatial partitioning in n-dimensions?

  - by kevin42

  I'm trying to design an implementation of Vector Quantization as a c++ template class that can handle different types and dimensions of vectors (e.g. 16 dimension vectors of bytes, or 4d vectors of doubles, etc). I've been reading up on the algorithms, and I understand most of it: here and here I want to implement the Linde-Buzo-Gray (LBG) Algorithm, but I'm having difficulty figuring out the general algorithm for partitioning the clusters. I think I need to define a plane (hyperplane?) that splits the vectors in a cluster so there is an equal number on each side of the plane. [edit to add more info] This is an iterative process, but I think I start by finding the centroid of all the vectors, then use that centroid to define the splitting plane, get the centroid of each of the sides of the plane, continuing until I have the number of clusters needed for the VQ algorithm (iterating to optimize for less distortion along the way). The animation in the first link above shows it nicely. My questions are: What is an algorithm to find the plane once I have the centroid? How can I test a vector to see if it is on either side of that plane?

  Read the article

• Partial Evaluation of ConstantExpression in ExpressionTreeVisitor

  - by Andrew Theken

  Hi all, I am not an Expression Tree master by any stretch of the imagination, what I have is code that looks like this: int external = 10; using(var session = new Session()) { session.Add(new Product { Name = "test1", Price = 20 }); session.Add(new Product {Name = "test", Price = 10}); var product = session.Products.Where(p => p.Price == external).FirstOrDefault(); Assert.Equal(10, product.Price); } Session implements all the IQueryProvider, IQueryable interfaces you'd come to expect from a LINQ Provider. When I execute the query, everything goes to plan until I read the ConstantExpression for "external", at which point, I am at a loss as to how to move forward because: //constant is ConstantExpression for "external" on the right side of the "p.Price == external" expression above. var t = constant.GetType(); //evaluates to class called "<>c__DisplayClass2" - with a member named "external" that has the value 10. The question is basically.. How can I just access the value of the member "external" - is there a way to accomplish this without using reflection? or am I cooked? What am I missing?

  Read the article

• How does the last integer promotion rule ever get applied in C?

  - by SiegeX

  6.3.1.8p1: Otherwise, the integer promotions are performed on both operands. Then the following rules are applied to the promoted operands: If both operands have the same type, then no further conversion is needed. Otherwise, if both operands have signed integer types or both have unsigned integer types, the operand with the type of lesser integer conversion rank is converted to the type of the operand with greater rank. Otherwise, if the operand that has unsigned integer type has rank greater or equal to the rank of the type of the other operand, then the operand with signed integer type is converted to the type of the operand with unsigned integer type. Otherwise, if the type of the operand with signed integer type can represent all of the values of the type of the operand with unsigned integer type, then the operand with unsigned integer type is converted to the type of the operand with signed integer type. Otherwise, both operands are converted to the unsigned integer type corresponding to the type of the operand with signed integer type. For the bolded rule to be applied it would seem to imply you need to have have an unsigned interger type who's rank is less than the signed integer type and the signed integer type cannot hold all the values of the unsigned integer type. Is there a real world example of such a case or is this statement serving as a catch-all to cover all possible permutations?

  Read the article

• Perceptron Classification and Model Training

  - by jake pinedo

  I'm having an issue with understanding how the Perceptron algorithm works and implementing it. cLabel = 0 #class label: corresponds directly with featureVectors and tweets for m in range(miters): for point in featureVectors: margin = answers[cLabel] * self.dot_product(point, w) if margin <= 0: modifier = float(lrate) * float(answers[cLabel]) modifiedPoint = point for x in modifiedPoint: if x != 0: x *= modifier newWeight = [modifiedPoint[i] + w[i] for i in range(len(w))] w = newWeight self._learnedWeight = w This is what I've implemented so far, where I have a list of class labels in answers and a learning rate (lrate) and a list of feature vectors. I run it for the numbers of iterations in miter and then get the final weight at the end. However, I'm not sure what to do with this weight. I've trained the perceptron and now I have to classify a set of tweets, but I don't know how to do that. EDIT: Specifically, what I do in my classify method is I go through and create a feature vector for the data I'm given, which isn't a problem at all, and then I take the self._learnedWeight that I get from the earlier training code and compute the dot-product of the vector and the weight. My weight and feature vectors include a bias in the 0th term of the list so I'm including that. I then check to see if the dotproduct is less than or equal to 0: if so, then I classify it as -1. Otherwise, it's 1. However, this doesn't seem to be working correctly.

  Read the article

• Generate a set of strings with maximum edit distance

  - by Kevin Jacobs

  Problem 1: I'd like to generate a set of n strings of fixed length m from alphabet s such that the minimum Levenshtein distance (edit distance) between any two strings is greater than some constant c. Obviously, I can use randomization methods (e.g., a genetic algorithm), but was hoping that this may be a well-studied problem in computer science or mathematics with some informative literature and an efficient algorithm or three. Problem 2: Same as above except that adjacent characters cannot repeat; the i'th character in each string may not be equal to the i+1'th character. E.g., 'CAT', 'AGA' and 'TAG' are allowed, 'GAA', 'AAT', and 'AAA' are not. Background: The basis for this problem is bioinformatic and involves designing unique DNA tags that can be attached to biologically derived DNA fragments and then sequenced using a fancy second generation sequencer. The goal is to be able to recognize each tag, allowing for random insertion, deletion, and substitution errors. The specific DNA sequencing technology has a relatively low error rate per base (~1%), but is less precise when a single base is repeated 2 or more times (motivating the additional constraints imposed in problem 2).

  Read the article

• Essence of BiMap in Google collections

  - by littleEinstein

  I am still quite puzzled at the BiMap in Google collections/Guava. It was claimed that The two bimaps are backed by the same data; any changes to one will appear in the other. I browsed through the source code, and I found the use of delegate in ForwardingMap. But in any actually subclass of StandardBiMap, I do see the data are put into both the forward and reverse map. So what is the essence, and why it claims to have saved space by keeping only one copy of the data? Is it just the actual objects are one set, but two distinct sets of references to these objects are still needed, one set maintained in forward map, and the other in reverse map? private V putInBothMaps(K key, V value, boolean force) { boolean containedKey = containsKey(key); if (containedKey && Objects.equal(value, get(key))) { return value; } if (force) { inverse().remove(value); } else if (containsValue(value)) { throw new IllegalArgumentException( "value already present: " + value); } V oldValue = super.put(key, value); updateInverseMap(key, containedKey, oldValue, value); return oldValue; }

  Read the article

• Is this a clean way to manage AsyncResults with Generic Methods?

  - by Michael Stum

  I've contributed Async Support to a Project I'm using, but I made a bug which I'm trying to fix. Basically I have this construct: private readonly Dictionary<WaitHandle, object> genericCallbacks = new Dictionary<WaitHandle, object>(); public IAsyncResult BeginExecute<T>(RestRequest request, AsyncCallback callback, object state) where T : new() { var genericCallback = new RequestExecuteCaller<T>(this.Execute<T>); var asyncResult = genericCallback.BeginInvoke(request, callback, state); genericCallbacks[asyncResult.AsyncWaitHandle] = genericCallback; return asyncResult; } public RestResponse<T> EndExecute<T>(IAsyncResult asyncResult) where T : new() { var cb = genericCallbacks[asyncResult.AsyncWaitHandle] as RequestExecuteCaller<T>; genericCallbacks.Remove(asyncResult.AsyncWaitHandle); return cb.EndInvoke(asyncResult); } So I have a generic BeginExecute/EndExecute method pair. As I need to store the delegate that is called on EndExecute somewhere I created a dictionary. I'm unsure about using WaitHandles as keys though, but that seems to be the only safe choice. Does this approach make sense? Are WaitHandles unique or could I have two equal ones? Or should I instead use the State (and wrap any user provided state into my own State value)? Just to add, the class itself is non-generic, only the Begin/EndExecute methods are generic.

  Read the article

• Do you use an architectural framework for Flex/AIR development?

  - by Christophe Herreman

  Given that Flex is still a relatively young technology, there are already a bunch of architectural frameworks available for Flex/AIR (and Flash) development, the main ones being Cairngorm and PureMVC. The amount of architectural frameworks is remarkable compared to other technologies. I was wondering how many of you use an architectural framework for Flex development. If so, why, or why not if you don't use any? To share my own experience and point of view: I have used Cairngorm (and ARP for Flash development) on a variety of projects and found that at times, we needed to write extra code just to fit into the framework, which obviously didn't feel right. Although I haven't used PureMVC on many occasions, I have the same gut feeling after looking at the examples applications. Architectural frameworks equal religion in some way. Most followers are convinced that their framework is THE framework and are not open or very skeptical when it comes to using other frameworks. (I also find myself hesitant and skeptical to check out new frameworks, but that is mainly because I would rather wait until the hype is over.) In conclusion, I'm thinking that it is better to have a sound knowledge of patterns and practices that you can apply in your application instead of choosing a framework and sticking to it. There is simply no right or wrong and I don't believe that there will ever be a framework that is considered the holy grail.

  Read the article

• Unit Testing (xUnit) an ASP.NET Mvc Controller with a custom input model?

  - by Danny Douglass

  I'm having a hard time finding information on what I expect to be a pretty straightforward scenario. I'm trying to unit test an Action on my ASP.NET Mvc 2 Controller that utilizes a custom input model w/ DataAnnotions. My testing framework is xUnit, as mentioned in the title. Here is my custom Input Model: public class EnterPasswordInputModel { [Required(ErrorMessage = "")] public string Username { get; set; } [Required(ErrorMessage = "Password is a required field.")] public string Password { get; set; } } And here is my Controller (took out some logic to simplify for this ex.): [HttpPost] public ActionResult EnterPassword(EnterPasswordInputModel enterPasswordInput) { if (!ModelState.IsValid) return View(); // do some logic to validate input // if valid - next View on successful validation return View("NextViewName"); // else - add and display error on current view return View(); } And here is my xUnit Fact (also simplified): [Fact] public void EnterPassword_WithValidInput_ReturnsNextView() { // Arrange var controller = CreateLoginController(userService.Object); // Act var result = controller.EnterPassword( new EnterPasswordInputModel { Username = username, Password = password }) as ViewResult; // Assert Assert.Equal("NextViewName", result.ViewName); } When I run my test I get the following error on my test fact when trying to retrieve the controller result (Act section): System.NullReferenceException: Object reference not set to an instance of an object. Thanks in advance for any help you can offer!

  Read the article

• Cache Class compilation error using parent-child relationships and cache sql storage

  - by Fred Altman

  I have the global listed below that I'm trying to create a couple of cache classes using sql stoarage for: ^WHEAIPP(1,26,1)=2 ^WHEAIPP(1,26,1,1)="58074^^SMSNARE^58311" 2)="58074^59128^MPHILLIPS^59135" ^WHEAIPP(1,29,1)=2 ^WHEAIPP(1,29,1,1)="58074^^SMSNARE^58311" 2)="58074^59128^MPHILLIPS^59135" ^WHEAIPP(1,93,1)=2 ^WHEAIPP(1,93,1,1)="58884^^SSNARE^58948" 2)="58884^59128^MPHILLIPS^59135" ^WHEAIPP(1,166,1)=2 ^WHEAIPP(1,166,1,1)="58407^^SMSNARE^58420" 2)="58407^59128^MPHILLIPS^59135" ^WHEAIPP(1,324,1)=2 ^WHEAIPP(1,324,1,1)="58884^^SSNARE^58948" 2)="58884^59128^MPHILLIPS^59135" ^WHEAIPP(1,419,1)=3 ^WHEAIPP(1,419,1,1)="59707^^SSNARE^59708" 2)="59707^^MPHILLIPS^59910,58000^^^^" 3)="59707^59981^SSNARE^60117,53241^^^^" The first two subscripts of the global (Hmo and Keen) make a unique entry. The third subscript (Seq) has a property (IppLineCount) which is the number of IppLines in the fourth subscript level (Seq2). I create the class WIppProv below which is the parent class: /// <PRE> /// ============================ /// Generated Class Definition /// Table: WMCA_B_IPP_PROV /// Generated by: FXALTMAN /// Generated on: 05/21/2012 13:46:41 /// Generator: XWESTblClsGenV2 /// ---------------------------- /// </PRE> Class XFXA.MCA.WIppProv Extends (%Persistent, %XML.Adaptor) [ ClassType = persistent, Inheritance = right, ProcedureBlock, StorageStrategy = SQLMapping ] { /// .HMO Property Hmo As %Integer; /// .KEEN Property Keen As %Integer; /// .SEQ Property Seq As %String; Property IppLineCount As %Integer; Index iMaster On (Hmo, Keen, Seq) [ IdKey, Unique ]; Relationship IppLines As XFXA.MCA.WIppProvLine [ Cardinality = many, Inverse = relWIppProv ]; <Storage name="SQLMapping"> <DataLocation>^WHEAIPP</DataLocation> <ExtentSize>1000000</ExtentSize> <SQLMap name="DBMS"> <Data name="IppLineCount"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>1</Piece> </Data> <Global>^WHEAIPP</Global> <PopulationType>full</PopulationType> <Subscript name="1"> <AccessType>Sub</AccessType> <Expression>{Hmo}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="2"> <AccessType>Sub</AccessType> <Expression>{Keen}</Expression> </Subscript> <Subscript name="3"> <AccessType>Sub</AccessType> <LoopInitValue>1</LoopInitValue> <Expression>{Seq}</Expression> </Subscript> <Type>data</Type> </SQLMap> <StreamLocation>^XFXA.MCA.WIppProvS</StreamLocation> <Type>%Library.CacheSQLStorage</Type> </Storage> } This class compiles fine. Next I created the WIppProvLine class listed below and made a parent-child relationship between the two: /// Used to represent a single line of IPP data Class XFXA.MCA.WIppProvLine Extends (%Persistent, %XML.Adaptor) [ ClassType = persistent, Inheritance = right, ProcedureBlock, StorageStrategy = SQLMapping ] { /// .CLM_AMT_ALLOWED node: 0 piece: 6<BR> /// This field should be used in conjunction with the Claim Operator field to /// define a whole claim dollar amount at which a particular claim should be /// flagged with a Pend status. Property ClmAmtAllowed As %String; /// .CLM_LINE_AMT_ALLOWED node: 0 piece: 8<BR> /// This field should be used in conjunction with the Clm Line Operator field to /// define a claim line dollar amount at which a particular claim should be flagged /// with a Pend status. Property ClmLineAmtAllowed As %String; /// .CLM_LINE_OP node: 0 piece: 7<BR> /// A new Table/Column Reference that gives the SIU (Special Investigative Unit) /// the ability to look for claim line dollars above, below, or equal to a set /// amount. Property ClmLineOp As %String; /// .CLM_OP node: 0 piece: 5<BR> /// A new Table/Column Reference that gives the SIU (Special Investigative Unit) /// the ability to look for claim dollars above, below, or equal to a set amount. Property ClmOp As %String; Property EffDt As %Date; Property Hmo As %Integer; /// .IPP_REASON node: 0 piece: 10<BR> /// IPP Reason Code Property IppCode As %Integer; Property Keen As %Integer; /// .LAST_CHG_DT node: 0 piece: 4<BR> /// Last Changed Date Property LastChgDt As %Date; /// .PX_DX_CDE_FLAG node: 0 piece: 9<BR> /// A Flag to indicate whether or not Procedure Codes or Diagnosis Codes are to be /// associated with this SIU Flag Type Entry. If the Flag = Y, then control would /// jump to a new screen where the user can enter the necessary codes. Property PxDxCdeFlag As %String; Property Seq As %String; Property Seq2 As %String; Index iMaster On (Hmo, Keen, Seq, Seq2) [ IdKey, PrimaryKey, Unique ]; /// .TERM_DT node: 0 piece: 2<BR> /// Term Date Property TermDt As %Date; /// .USER_INI node: 0 piece: 3 Property UserIni As %String; Relationship relWIppProv As XFXA.MCA.WIppProv [ Cardinality = one, Inverse = IppLines ]; Index relWIppProvIndex On relWIppProv; //Index NewIndex1 On (RelWIppProv, Seq2) [ IdKey, PrimaryKey, Unique ]; <Storage name="SQLMapping"> <ExtentSize>1000000</ExtentSize> <SQLMap name="DBMS"> <ConditionalWithHostVars></ConditionalWithHostVars> <Data name="ClmAmtAllowed"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>6</Piece> </Data> <Data name="ClmLineAmtAllowed"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>8</Piece> </Data> <Data name="ClmLineOp"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>7</Piece> </Data> <Data name="ClmOp"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>5</Piece> </Data> <Data name="EffDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>1</Piece> </Data> <Data name="Hmo"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>11</Piece> </Data> <Data name="IppCode"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>10</Piece> </Data> <Data name="LastChgDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>4</Piece> </Data> <Data name="PxDxCdeFlag"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>9</Piece> </Data> <Data name="TermDt"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>2</Piece> </Data> <Data name="UserIni"> <Delimiter>"^"</Delimiter> <Node>+0</Node> <Piece>3</Piece> </Data> <Global>^WHEAIPP</Global> <Subscript name="1"> <AccessType>Sub</AccessType> <Expression>{Hmo}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="2"> <AccessType>Sub</AccessType> <Expression>{Keen}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="3"> <AccessType>Sub</AccessType> <Expression>{Seq}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Subscript name="4"> <AccessType>Sub</AccessType> <Expression>{Seq2}</Expression> <LoopInitValue>1</LoopInitValue> </Subscript> <Type>data</Type> </SQLMap> <StreamLocation>^XFXA.MCA.WIppProvLineS</StreamLocation> <Type>%Library.CacheSQLStorage</Type> </Storage> } When I try to compile this one I get the following error: ERROR #5502: Error compiling SQL Table 'XFXA_MCA.WIppProvLine %msg: Table XFXA_MCA.WIppProvLine has the following unmapped (not defined on the data map) fields: relWIppProv' ERROR #5030: An error occurred while compiling class XFXA.MCA.WIppProvLine Detected 1 errors during compilation in 2.745s. What am I doing wrong? Thanks in Advance, Fred

  Read the article

• Microsoft Solver Foundation constraint

  - by emaster70

  Hello, I'm trying to use Microsoft Solver Foundation 2 to solve a fairly complicated situation, however I'm stuck with an UnsupportedModelException even when I dumb down the model as much as possible. Does anyone have an idea of what I'm doing wrong? Following is the least example required to reproduce the problematic behavior. var ctx = SolverContext.GetContext(); var model = ctx.CreateModel(); var someConstant = 1337.0; var decisionA = new Decision(Domain.Real, "decisionA"); var decisionB = new Decision(Domain.Real, "decisionB"); var decisionC = new Decision(Domain.Real, "decisionC"); model.AddConstraint("ca", decisionA <= someConstant); model.AddConstraint("cb", decisionB <= someConstant); model.AddConstraint("cc", decisionC <= someConstant); model.AddConstraint("mainConstraint", Model.Equal(Model.Sum(decisionA, decisionB, decisionC), someConstant)) model.AddGoal("myComplicatedGoal", GoalKind.Minimize, decisionC); var solution = ctx.Solve(); solution.GetReport().WriteTo(Console.Out); Console.ReadKey(); Please consider that my actual model should include, once complete, a few constraints in the form of a*a+b*a <= someValue, so if what I'm willing to do ultimately isn't supported, please let me know in advance. If that's the case I'd also appreciate a suggestion of some other solver with a .NET friendly interface that I could use (only well-known commercial packages, please). Thanks in advance

  Read the article

• Entity Framework 4 overwrite Equals and GetHashCode of an own class property

  - by Zhok

  Hi, I’m using Visual Studio 2010 with .NET 4 and Entity Framework 4. I’m working with POCO Classes and not the EF4 Generator. I need to overwrite the Equals() and GetHashCode() Method but that doesn’t really work. Thought it’s something everybody does but I don’t find anything about the problem Online. When I write my own Classes and Equals Method, I use Equals() of property’s, witch need to be loaded by EF to be filled. Like this: public class Item { public virtual int Id { get; set; } public virtual String Name { get; set; } public virtual List<UserItem> UserItems { get; set; } public virtual ItemType ItemType { get; set; } public override bool Equals(object obj) { Item item = obj as Item; if (obj == null) { return false; } return item.Name.Equals(this.Name) && item.ItemType.Equals(this.ItemType); } public override int GetHashCode() { return this.Name.GetHashCode() ^ this.ItemType.GetHashCode(); } } That Code doesn’t work, the problems are in Equals and GetHashCode where I try to get HashCode or Equal from “ItemType” . Every time I get a NullRefernceException if I try to get data by Linq2Entites. A dirty way to fix it, is to capture the NullReferenceException and return false (by Equals) and return base.GetHashCode() (by GethashCode) but I hope there is a better way to fix this problem. I’ve wrote a little test project, with SQL Script for the DB and POCO Domain, EDMX File and Console Test Main Method. You can download it here: Download

  Read the article

• Custom Jquery slideshow doesn't want to reset?

  - by Jared

  Hello, Under $(document).ready(function(), I have the following code: num = $("#mainContentCategoryLinksWrapper > div").size(); This makes num equal the length of the children of #mainContentCategoryLinksWrapper. Currently, this equals 4. Above the $(document).ready(function( I have this: var timesRun = 0; function slideshow(){ if(timesRun < num){ $(".arrowIn").stop().animate({color: "#a12324", textIndent: "30px", backgroundPosition: '0px 0px'}, 100, function(){ //the first child in the series has a class of "arrowIn" $(".arrowIn").next().addClass("replaceMe"); //Adds the ".replaceMe" placeholder the the next element. $(".arrowIn").removeClass("arrowIn"); //Deletes the class on the current element $(".replaceMe").addClass("arrowIn").removeClass("replaceMe"); //reassigns ".arrowIn" over ".replaceMe" timesRun = timesRun + 1; //increases number of times run }).prev().animate({color: "#000000", textIndent: "25px", backgroundPosition: '0px -25px'}, {duration: 50}); //puts the previous element back to it's original position }else{ timesRun = 0; $(".arrowIn").removeClass("arrowIn"); $("#mainContentCategoryLinksWrapper:first-child").addClass("arrowIn"); //this is supposed to reset timesRun, and set the first child in the series back to the original ".arrowIn" } } setInterval( 'slideshow()', 1000 ); So here is the what the code does: 1) Animates the first in the series of 4 (#1) timesRun = 1 2) Animates the second in the series of 4 (#2) timesRun = 2 3) Animates the third in the series of 4 (#3) timesRun = 3 4) Animates the fourth in the series of 4 (#4) timesRun = 4 5) timesRun is now longer less than num. Reset class names back to original to .arrowIn, set timesRun to 0. However, when the slideshow() is reexectuted, it doesn't start over. Any ideas? See www.raceramps.com/v3 for an example.

  Read the article

• .NET Thread.Abort again

  - by hoodoos

  Again I want to talk about safety of the Thread.Abort function. I was interested to have some way to abort operations which I can't control really and don't want actually, but I want to have my threads free as soon as possible to prevent thread thirsty of my application. So I wrote some test code to see if it's possible to use Thread.Abort and have the aborting thread clean up resources propertly. Here's code: int threadRunCount = 0; int threadAbortCount = 0; int threadFinallyCount = 0; int iterations = 0; while( true ) { Thread t = new Thread( () => { threadRunCount++; try { Thread.Sleep( Random.Next( 45, 55 ) ); } catch( ThreadAbortException ) { threadAbortCount++; } finally { threadFinallyCount++; } } ); t.Start(); Thread.Sleep( 45 ); t.Abort(); iterations++; } So, so far this code worked for about 5 mins, and threadRunCount was always equal to threadFinally and threadAbort was somewhat lower in number, because some threads completed with no abort or probably got aborted in finally. So the question is, do I miss something?

  Read the article

• How to tell if you touched a CCLabel? (Cocos2d Question)

  - by RexOnRoids

  How to tell if you touched a CCLabel? The following code obviously does not work well enough because it only tests for point equality. Naturally touch point will not necessarily be equal to the position property of the CCLabel (CCNode). How to I tell if a Touch point has fallen within the "rectangle?" of the CCLabel? - (void)ccTouchesEnded:(NSSet *)touches withEvent:(UIEvent *)event { for( UITouch *touch in touches ) { CGPoint location = [touch locationInView: [touch view]]; location = [[CCDirector sharedDirector] convertToGL:location]; self.myGraphManager.isSliding = NO; if(CGPointEqualToPoint(location, label1.position)){ NSLog(@"Label 1 Touched"); }else if(CGPointEqualToPoint(location, label2.position)){ NSLog(@"Label 2 Touched"); }else if(CGPointEqualToPoint(location, label3.position)){ NSLog(@"Label 3 Touched"); }else if(CGPointEqualToPoint(location, label4.position)){ NSLog(@"Label 4 Touched"); }else if(CGPointEqualToPoint(location, label5.position)){ NSLog(@"Label 5 Touched"); }else if(CGPointEqualToPoint(location, label6.position)){ NSLog(@"Label 6 Touched"); } NSLog(@"Touch Made!"); } }

  Read the article

• How is conversion of float/double to int handled in printf?

  - by Sandip

  Consider this program int main() { float f = 11.22; double d = 44.55; int i,j; i = f; //cast float to int j = d; //cast double to int printf("i = %d, j = %d, f = %d, d = %d", i,j,f,d); //This prints the following: // i = 11, j = 44, f = -536870912, d = 1076261027 return 0; } Can someone explain why the casting from double/float to int works correctly in the first case, and does not work when done in printf? This program was compiled on gcc-4.1.2 on 32-bit linux machine. EDIT: Zach's answer seems logical, i.e. use of format specifiers to figure out what to pop off the stack. However then consider this follow up question: int main() { char c = 'd'; // sizeof c is 1, however sizeof character literal // 'd' is equal to sizeof(int) in ANSI C printf("lit = %c, lit = %d , c = %c, c = %d", 'd', 'd', c, c); //this prints: lit = d, lit = 100 , c = d, c = 100 //how does printf here pop off the right number of bytes even when //the size represented by format specifiers doesn't actually match //the size of the passed arguments(char(1 byte) & char_literal(4 bytes)) return 0; } How does this work?

  Read the article

• NSFetchedResultsController is driving me crazy

  - by user267980

  Hi everyone. i've been building an app since 1 month using NSFetchedResultsController and i was testing the app on the 3.1.2 SDK. The poblem is that i've been using NSFetchedResultsController everywhere in my app and was working on the 3.1.2 version of the SDK, now my client say that i should make it compatible with the 3.0 version and the deadline is almost there. But is crashing everytime i change an object handled by the contoller, the application is crashing with very weird errors. The problem occure when removing the last object in a section and when a change make an object love to another section. I've been using a sample code from "More iPhone 3 Development Tackling iPhone SDK 3" by Dave Mark and Jeff LaMarche. I've also included some changes from link text Here is a sample output of the console when the application is crashing. * Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Invalid update: invalid number of sections. The number of sections contained in the table view after the update (1) must be equal to the number of sections contained in the table view before the update (2), plus or minus the number of sections inserted or deleted (2 inserted, 0 deleted).' 2010-03-14 16:23:29.758 Instaproofs[5879:207] Stack: ( 807902715, 7364425, 807986683, 811271572, 815059090, 815007323, 211023, 4363331, 810589786, 807635429, 810579728, 3620573, 3620227, 3614682, 3609719, 27337, 810595174, 807686849, 807683624, 839142449, 839142646, 814752238 ) If i knew that NSFetchedResultsController is so buggy, i would never used it. So basicaly i need the my NSFetchedResultsControllerDelegate to work fine on the 3.0 and above SDKs. It would be life saver if someone help me figure out what i'm doing wrong.

  Read the article

• SQL: Need help with query construction.

  - by Geeknidas

  Hi Guys, I am relatively new with sql and I need some help with some basic query construction. Problem: To retrieve the number of orders and the customer id from a table based on a set of parameters. I want to write a query to figure out the number of orders under each customer (Column: Customerid) along with the CustomerID where the number of orders should be greater or equal to 10 and the status of the order should be Active. Moreover, I also want to know the first transaction date of an order belonging to each customerid. Table Description: product_orders Orderid CustomerId Transaction_date Status ------- ---------- ---------------- ------- 1 23 2-2-10 Active 2 22 2-3-10 Active 3 23 2-3-10 Deleted 4 23 2-3-10 Active Query that I have written: select count(*), customerid from product_orders where status = 'Active' GROUP BY customerid ORDER BY customerid; The above statement gives me the sum of all order under a customer id but does not fulfil the condition of atleast 10 orders. I donot know how to display the first transaction date along with the order under a customerid (status: could be active or delelted doesn't matter) Ideal solutions should look like: Total Orders CustomerID Transaction Date (the first transaction date) ------------ ---------- ---------------- 11 23 1-2-10 Thanks in advance. I hope you guys would be kind enough to stop by and help me out. Cheers, Leonidas

  Read the article

• Understanding an interesting array update/replace function

  - by dave

  I'm a PHP amateur. This array function is an adaption of a function I noticed while reading this article. I thought this was an interesting type of array function, but I have a question about the way it works. my_func( array( 'sky' => 'blue' ) ); function my_func( array $settings = array() ) { $settings = $settings + array( 'grass'=>'green','sky'=>'dark' ); print_r( $settings ) ; // outputs: Array ( [sky] => blue [grass] => green ) } but..................... my_func( array( 'sky' => 'blue' ) ); function my_func( array $settings = array() ) { $settings = array( 'clock'=>'time' ) ; $settings = $settings + array( 'grass'=>'green','sky'=>'dark' ); print_r( $settings ) ; // outputs: Array ( [clock] => time [grass] => green [sky] => dark ) } Why does [sky] not equal 'blue' in the second instance? Thanks.

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >