Search Results

Search found 7875 results on 315 pages for 'wired networking'.

Page 122/315 | < Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >

• TCP Tweaking options and Results: Any suggestions?

  - by krishnakumar

  I first tried with the default windows XP TCP option(It doesn't have TCPWindowSize option and TCP1323 in its Registry setting). I dynamically set those options using TCP optimizer. Here I list out the result with and without TCP Tweaking option. I see no major improvements in TCP after increasing window size optimally too. What value should I set to increase the performance? Results: Without any window size and MTU setting from server to client (receiving) TCPWindowSize : MTU : TTL: Size:586 MB total duration : 03:47 With window size extension from server to client (receiving) Bandwidth :100 Mbps Latency: 100ms BDP :1250000 TCPWindowSize : 1250000 MTU :1500 TTL:128 Size:586MB total duration : 03:44 With window size extension from server to client (receiving) TCPWindowSize :64240 MTU :1500 TTL :112 Size: 586MB total duration : 03:49

  Read the article

• "Request not supported" in IPCONFIG (WinXP SP3)

  - by pablog

  In a customer PC (Windows XP SP3), suddenly the network went down: the network adapter appears with an error mark. I replaced the network card, but the new one does the same thing. When I enter IPCONFIG, XP shows this error (in standard and safe mode): Internal error occurred Request not supported Unable to query host name If I start the system with a boot cd the PC runs fine, so the problem seems to be in the XP installation. I tried: uninstalling and reinstalling the network card in the Device Manager disabling and reenabling the card netsh int ip reset netsh winsock reset catalog and a couple of "reset" programs (WinsockxpFix.exe, etc) with no luck. Is there any way to fix it without reinstalling XP? TIA, Pablo

  Read the article

• Which subnet masks are valid for a subnetted Class B address?

  - by Daddy Warbox

  Yes, this is a school question, and yes I already know the correct possible answers (supposedly), so I'm not going to bother posting them. Instead, I just want to understand the meaning of this question. I know what class B addresses are, and what valid class B subnet addresses are. I guess one way to define my question is to ask why the answer "255.255.0.0" is wrong, necessarily? That seems to defy my understanding, or else some part of my brain is just not registering the question correctly. Thanks in advance.

  Read the article

• How to setup a Wi-Fi 2-computer network with Internet sharing?

  - by Narek

  I have the following devices: Desktop Computer (Windows XP Professional) Laptop Computer (Windows Vista Home Premium) A USB modem that I want to connect to my Desktop computer (so my Desktop has Internet) And a Wi-Fi router (D-Link, model: DIR-300) that I want to use in order to create a connection between mentioned two computers to be able to share files and what is the most important thing to make my laptop to have access to the Internet. What steps I should do to have this system?

  Read the article

• Any software that draws my network layout?

  - by claws

  Hello, I'm looking for some tool on windows/linux which draws the layout of the network I'm in. Btw, don't think I'm just a user in this network. I don't have any admin controls.

  Read the article

• Why maximum 1.0 Gbit Ethernet connection an old notebook, and only 100 Mbit on newer faster computer

  - by Sam

  Strange problem about Ethernet speed: recently we bought an i7 core computer running Win7 64 bit with an onboard Gigabit Ethernet controller (Realtek PCIe Gbit Ethernet Family controller). Connecting this new fast pc directly to our brand new ASUS Gigabit Ethernet router via CAT6 cable(!) shows up the adapter status (see picture attached) only 100mbit, while the router is capable of 1000 mbit. More facts: Connecting an 8 year old IBM notebook with gigabit ethernet to the same cable end shows 1.0 Gbit connection in its adapter status. Speedtest.net shows 35 mbit/s down on the new computer Speedtest.net shows 78 mbit/s down on the old rusty IBM notebook. We have an 120 mbit down internet connection, which we we truly receive on another pc (also directly connected to the router) How to get the 1.0 Gbit going in the new pc ?

  Read the article

• What is a good custom MAC address? [closed]

  - by rausch

  My new notebook has been dropping the WiFi connection infrequently. The reason was, that my PS3 had the same MAC address. I changed the MAC address of my notebook and the WiFi is now stable. At first I just reduced the address' last block by 1, which happened to be the MAC address of another device. I reduced it again and for now it's fine. In order to avoid conflicts in the future, is there an address range that is safe to use for custom/non-vendor MAC addresses?

  Read the article

• How Can I Disable CRL Checks For A Windows 2008 App Using WinHTTP?

  - by Mike B

  I've got a Windows 2008 server with an app that uses WinHTTP for SSL sessions. The server is isolated from the internet but still tries to connect to CRL distribution points, which leads to some timeouts. Since the server has no access to the internet whatsoever, I'd like to disable CRL checks. I had a similar issue on a Windows 2003 server and resolved it by adjusting the following registry keys: HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Http/Parameters/SslBindiongInfo/0.0.0.0:443/DefaultSslCertCheckMode (DWORD=1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRevocationCheck (DWORD = 1) HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/Rasman/PPP/EAP/13/NoRootRevocationCheck (DWORD = 1) That doesn't seem to be working in 2008. I've also tried disabling the CRL check from IE under Tools Internet Options Advanced. Is there anything else I can try here?

  Read the article

• Campus VLAN Segmentation - By OS?

  - by Moduspwnens

  We've been thinking through re-arranging our network and VLAN configuration. Here's the situation. We already have our servers, VoIP phones, and printers on their own VLANs, but our problem lies with end user devices. There are just too many to lump on the same VLAN without being hammered with broadcasts! Our current segmentation strategy has them split into VLANs like this: Student iPads Staff iPads Student Macbooks Staff Macbooks Gaming devices Staff (Other) Student (Other) *Note that our network has many more iPads and MacBooks than most. Since the primary reason we're splitting them is just to put them in smaller groups, this has been working for us (for the most part). However, this required our staff to maintain access control lists (MAC addresses) of all devices belonging in these groups. It also has the unfortunate side effect of illogically grouping broadcast traffic. For example, using this setup, students on opposite ends of campus using iPads will share broadcasts, but two devices belonging to the same user (in the same room) will likely be on completely separate VLANs. I feel like there must be a better way of doing this. I've done a lot of research and I'm having trouble finding instances of this kind of segmentation being recommended. The feedback on the most relevant SO question seems to point toward VLAN segmentation by building/physical location. I feel like that makes sense because logically, at least among miscellaneous end users, broadcasts will typically be intended for nearby devices. Are there other campuses/large-scale networks out there segmenting VLANs based on end-system OS? Is this a typical configuration? Would VLAN segmentation based on physical location (or some other criteria) be more effective? EDIT: I've been told that we will soon be able to dynamically determine device OS without maintaining access lists, although I'm not sure how much that affects the answers to the questions.

  Read the article

• I've inherited a rat's nest of cabling. What now?

  - by hydroparadise

  You know, you see pictures like below and sort of chuckle until you actually have to deal with it. I have just inherited something that looks like the picture below. The culture of the organization does not tolerate down time very well, yet I have been tasked to 'clean it up'. The network functions as it is, and there doesn't seem to be rush to get it done, but I will have to tackle the bear at some point. I get the ugly eye when I mention anything about weekends. So my question goes, is there sort of a structured approach to this problem? My Ideas thus far: Label, Label, Label Make up my patch cables of desired length ahead of time Do each subnet at a time (appears that each subnet are for different physical locations) Replace one cable at a time for each subnet It's easier to get forgiveness than permision?

  Read the article

• How to bypass vpn talking to VMWare Guest?

  - by marc esher

  Greetings. Network/VPN n00b question here. I'm running VMWare Workstation with a Guest Windows 2003 Server. It has SQL Server 2000 installed. The sole purpose for this Guest is to house SQL Server... it needn't have internet access or access to any other resources on the network other than the host. When launch Check Point VPN software, the host routes through the company network before it connects to the guest ... i.e. it's no longer a direct connection. I assume this is just how things are supposed to work. However, what's happening is that the connection between my host and the SQL Server instance on the guest intermittently drops. It's not consistent, and some databases on the server will be responsive while others aren't. It appears that the databases with the most traffic on the guest (the ones I'm hitting with load tests) are the ones that become intermittently unresponsive. This problem only manifests when VPN is on; when it's off, I can pound away on this database with no troubles. Thanks for any advice!

  Read the article

• Multiple IP's using one NIC connectivity problem - Windows

  - by Vincent

  I have a frame relay network that is directly connected to a GPRS network. I also have a ADSL high speed network and recently I have been trying to achieve the following network configuration using windows 7 (Also tried XP) with no success to date. On one server I have two NIC's NIC1 I would like the following two static IP address's 10.0.1.110 and 10.0.1.200 the cisco router has a default gateway of 10.0.1.1 the ADSL is DHCP. NIC1 and the cisco router do not have access to the internet. NIC2 is setup for DHCP with a primary DNS and secondary DNS configured to enable internet connectivity. With NIC1 all incoming TCP connections are from IP address's starting with 10.192.x.x I cannot establish a TCP connection to both 10.0.1.110 and 10.0.1.200. Its either one or the other. I have a static route implemented in windows of: route -p 10.192.0.0 mask 255.255.0.0 10.0.1.1 metric 1 I have tried leaving out the gateway in the NIC1 and many other combinations with no success. Can anyone please help? What am I doing wrong?

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Windows host MIA on network

  - by andrewbadera

  I've had a machine effectively disappear off my home office network. 192.168.1.100 - Windows 7 laptop (on domain) - problem machine 192.168.1.42 - Windows 2008 server (domain controller) 192.168.1.101 - Windows 7 laptop (guest; not on domain) For some reason I am unable to ping, tracert or remote desktop to 192.168.1.100 from .42 or .101. I can remote between .42 and .101 no problem however. .100 cannot ping nor remote desktop to .42 or .101. Remote Desktop access is enabled on .100. I've opened the firewall rules. I've disabled the firewall domain profile. I've turned the firewall service off entirely. No matter what I do, the .100 host is unreachable by any other host on the network. I'm at my wit's end. Thanks in advance for any debug advice!

  Read the article

• Test server on a local network with XAMPP

  - by hopscotch1978

  Hi, I'm not very proficient with networks and could use some help. I've got a Win 7 desktop with XAMPP which acts as my local dev machine. I've configured a virtual host on the desktop which I'm able to access fine. If I'm understanding things correctly, the virtual host uses port 80 (<VirtualHost 127.0.0.1:80>). I've just tried to configure a separate Win XP laptop on the local wireless network to connect to the main desktop for testing purposes. I've added the IP address and virtual host name to my Hosts file on the laptop. My virtual host is imaginatively named "virtualhost1". When I type this into my laptop browser, it connects correctly to the main desktop and I get the XAMPP welcome screen. But I can't seem to get to the actual site, just the XAMPP welcome screen. It kind of jumps the browser to http://virtualhost1/xampp/. I think it's a port issue of some sort but I have no idea how to resolve it. I would get the same XAMPP welcome screen on my desktop if I omitted ":80" from the virtual host declaration. On my main desktop, typing "virtualhost1" to the browser address bar gives me the site correctly, not the XAMPP welcome screen. Help would be appreciated. Thank you.

  Read the article

• My DNS cannot resolve an web site address?

  - by ipkiss

  Hello all, Recently, I could not access the webpage bbc.co.uk anymore, while I can access other websites smoothly. Ar first, I though there may be some problem with my laptop. However, if I use my laptop through my company network, I can load the page bbc.co.uk normally. Then, I though maybe my ADSL at home blocks that web address. However, I tried another laptop with my home ADSL and it can load the page bbc.co.uk very fast. Now I do not know what could be the problem. Can anyone tell me please? Thank you.

  Read the article

• msi netbook refuses to connect to home wireless network (windows xp)

  - by sa125

  Hi - I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• How do I know how many bandwidth an individual application are consuming on Mac OS X?

  - by overboming

  I mean for individual application, if it doesn't provide this kind of functionality.

  Read the article

• Epson Artisan 800 on Ubuntu/Linux

  - by Tim Lytle

  Update for Ubuntu 10.04: Printing should work 'out-of-box', scanning still needs the newer sane backend. Looking for a known good way to setup an Epson Artisan 800 on Ubuntu specifically or any linux box in general. It is a printer/scanner with ethernet/wifi/usb. I'd like to use it as a network printer/scanner being able to do both from my Windows and Ubuntu machines; however, if it needs to be physically connected to a computer (preferably the Ubuntu machine) that is doable (again, then sharing print/scan functions to the network). Basically, I'm looking for someone who has used this printer/scanner (or similar) in a multi-platform environment to share how the set it up and how well it worked. Updated: A little more information, like most printers (I expect) the documentation for the printer basically says, "don't use plug-n-play, run our setup CD from your Windows/Mac system", to do anything (set it up for network use even). I guess that's to make it easy for anyone else to setup, but when you're looking to use it with an unsupported (by Epson's documentation) OS, you're just stuck on your own. What I was hoping for was someone who could say, "Forget the bundled software, do [this] to set it up on wifi manually, install [this] to connect to the scanner from [os], printing works with [this] driver - at least that's how I set it up." I'll will (and have so far) use the information here, and post my own setup when I'm done, if there's no one else out there with that experience.

  Read the article

• How to find the real IP to which IPVS is routing a virtual IP

  - by Wayne Conrad

  I'm trying to find a problem server hiding behind a virtual IP (using LVS/ipvs). I've got a test program that sends requests to the virtual IP until it gets the bad response, but how can I tell to which real IP a request to the virtual IP got routed? On the box doing the virtual IP magic, here's the virtual IP configuration (for the service I care about): IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn ... TCP 10.1.0.254:5025 nq -> 10.1.0.5:5025 Route 1 0 1 -> 10.1.0.6:5025 Route 1 0 5 -> 10.1.0.7:5025 Route 1 0 2 -> 10.1.0.9:5025 Local 1 0 3 -> 10.1.0.11:5025 Route 1 0 3 ... My client program is sending TCP requests to 10.1.0.254:5025, usually getting a good response but sometimes a bad response. With this few servers, I could send my request to each server in turn until I discover the culprit, but I wonder if that technique will scale as we add servers. What means exist for me to find out where requests got routed? Kernel: Linux 2.6.32 OS: Debian testing (whatever that's called these days). ipvsadm is version 1.25, compiled with ipvs v1.2.1

  Read the article

• HAProxy causing delay

  - by user1221444

  I am trying to configure HAProxy to do load balancing for a custom webserver I created. Right now I am noticing an increasing delay with HAProxy as the size of the return message increases. For example, I ran four different tests, here are the results: Response 15kb through HAProxy: Avg. response time: .34 secs Transacation rate: 763 trans/sec Throughput: 11.08 MB/sec Response 2kb through HAProxy: Avg. response time: .08 secs Transaction rate: 1171 trans / sec Throughput: 2.51 MB/sec Response 15kb directly to server: Avg. response time: .11 sec Transaction rate: 1046 trans/sec throughput: 15.20 MB/sec Response 2kb directly to server: Avg. Response time: .05 secs Transaction rate: 1158 trans/sec Throughput: 2.48 MB/sec All transactions are HTTP requests. As you can see, there seems to be a much bigger difference between response times for when the response is bigger, than when it is smaller. I understand there will be a slight delay when using HAProxy. Not sure if it matters, but the test itself was run using siege. And during the test there was only one server behind the HAProxy(the same that was used in the direct to server tests). Here is my haproxy.config file: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 10000 user haproxy group haproxy daemon #debug defaults log global mode http option httplog option dontlognull retries 3 option redispatch option httpclose maxconn 10000 contimeout 10000 clitimeout 50000 srvtimeout 50000 balance roundrobin stats enable stats uri /stats listen lb1 10.1.10.26:80 maxconn 10000 server app1 10.1.10.200:8080 maxconn 5000 I couldn't find much in terms of options in this file that would help my problem. I have heard suggestions that I may have to adjust a few of my sysctl settings. I could not find a lot of information on this however, most documentation is for Linux 2.4 and 2.6 on the sysctl stuff, I am running 3.2(Ubuntu server 12.04), which seems to auto tuning, so I have no clue what I should or shouldn't be changing. Most settings changes I tried had no effect or a negative effect on performance. Just a notice, this is a very preliminary test, and my hope is that at deployment time, my HAProxy will be able to balance 10k-20k requests/sec to many servers, so if anyone could provide information to help me reach that goal, it would be much appreciated. Thank you very much for any information you can provide. And if you need anymore information from me please let me know, I will get you anything I can.

  Read the article

• Unable to compile netmap on Fedora 32 bit

  - by John Elf

  This is the error everytime I try to install netmap: Can someone let me know how to isntall the same on e1000e or ixgbe. I have kernel header and source installed. [root@localhost e1000]# make KSRC=/usr/src/kernels/2.6.35.6-45.fc14.i686/ make -C /usr/src/kernels/2.6.35.6-45.fc14.i686/ M=/media/sf_Shared/netmap-linux/net/e1000 modules make[1]: Entering directory /usr/src/kernels/2.6.35.6-45.fc14.i686' CC [M] /media/sf_Shared/netmap-linux/net/e1000/e1000_main.o /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_tx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:2: error: implicit declaration of function ‘vzalloc’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1485:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_setup_rx_resources’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:1680:20: warning: assignment makes pointer from integer without a cast /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_tx_csum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:2780:2: error: implicit declaration of function ‘skb_checksum_start_offset’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_rx_checksum’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:3689:2: error: implicit declaration of function ‘skb_checksum_none_assert’ /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c: In function ‘e1000_restore_vlan’: /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: error: ‘VLAN_N_VID’ undeclared (first use in this function) /media/sf_Shared/netmap-linux/net/e1000/e1000_main.c:4617:23: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [/media/sf_Shared/netmap-linux/net/e1000/e1000_main.o] Error 1 make[1]: *** [_module_/media/sf_Shared/netmap-linux/net/e1000] Error 2 make[1]: Leaving directory/usr/src/kernels/2.6.35.6-45.fc14.i686' make: * [all] Error 2

  Read the article

• OpenVPN/Tunnelblick through wireless router, no connection.

  - by Oscar

  I'm using OpenVPN with Tunneblick on my Macbook Pro to access a server on my job. I't works fine, but i can't get it working with my Netgear WGT624v3 wireless router. I get this warning: WARNING: potential route subnet conflict between local LAN [192.168.1.0/255.255.255.0] and remote VPN [192.168.1.0/255.255.255.0] Someone told me that i should "port forward" on my router, but i can't figure out the right settings. Also not shure i'm doing it right.

  Read the article

• Vaio Laptop wireless connectivity loss after some minute

  - by Mehran Meidani

  I have a big problem with my laptop, My laptop loss it's connectivity to internet randomly! for Example sometimes it's ok up to 1h but usually the problem occurred after 5 min. When I run these command, i can continue working with internet : ipconfig /release ipconfig /renew If i turn wireless off and on, the problem don't solved I have another laptop (Macbook pro) and it doesn't have any problem I use Linksys E2000 as an wireless access point Model : Sony vaio sa21gx OS : Windows 7 SP1 Thank you for your help and sorry for my bad english :)

  Read the article

• OS X will not register newly installed network adapters

  - by Chris

  I have purchased an Edimax 7318USg and tested it on a Windows machine (works). The installation process for the software for this adapter runs smoothly. However, OS X simply does not recognize new network adapters. When you go to System Preferences/Network, a new network adapter should be present/there should be an alert. This is not the case. Why might this be? Is there a setting I may reset to force the operating system to recognize this? Thanks!

  Read the article

< Previous Page | 118 119 120 121 122 123 124 125 126 127 128 129  | Next Page >