Search Results

Search found 11288 results on 452 pages for 'git status'.

Page 124/452 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Invoking mercurial commands for all directories in a given directory

  - by sasuke

  Hi folks! Let's say I have around 10 hg repositories cloned in a parent directory (let's call it "parent"). Is there any way I can invoke a mercurial command like hg status on all of the sub-directories rather than performing the laborious act of cding into each directory and then invoking hg status. JFTR, I did try out the good old xargs but for some reason it fails to work. The commands which I used are: find . -maxdepth 1 -type d -print | xargs -t "hg status" and ls | xargs -t "hg status" Any help would be appreciated, TIA. -Sasuke

  Read the article

• Ubuntu 10.04: OpenVZ Kernel and pure-ftpd issues on HOST (no guest setup yet)

  - by Seidr

  After compiling and installing the OpenVZ flavour of kernel under Ubuntu 10.04, I am unable to browse to certain directories when connecting to the pure-ftpd server. The clients are dropping into PASSIVE mode, which is fine. This behaviour was happening before the change of kernel, however now when I browse to certain directories the connection just gets dropped. This only happens with a few directories under one login (web in specific), where as with another login it happens as soon as I connect. I've got the nf_conntrack_ftp kernel module installed (required to keep track of passive FTP connections as I understand, and an alias of the ip_conntrack_ftp module), however this has provided no alleviation of my problem. This module was actually required upon initial setup of my OS to get passive FTP working correctly, however when I compiled the OpenVZ kernel a lot of these modules were missing (iptables, conntrack etc). I recompiled the kernel with the missing modules, but to no effect. I've turned verbosity for the pure-ftpd server up, and still no clues have been spotted in either syslog or the transfer log. Neither did an strace provide any clues (that I could discern anyway) - although one strange thing is both in the output to the client and in the strace I notice that it does infact probe the directory and return the number of matches - it just fails after that. One more thing to mention is that if I FTP using the same credentials locally, everything works fine. This suggests that it is in fact an issue with either the conntrack_ftp module not functioning as expected, or a deeper networking issue. The Kernel was compiled and installed following the instructions at https://help.ubuntu.com/community/OpenVZ - bar the changes to the Kernel configuration (such as add iptables as a module). Below is an example of the log sent to the data (under FileZilla). Status: Resolving address of xxxx.co.uk Status: Connecting to 78.46.xxx.xxx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 4 of 10 allowed. Response: 220-Local time is now 08:52. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER xxx Response: 331 User xxx OK. Password required Command: PASS ******** Response: 230-User xxx has group access to: client1 sshusers Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Status: Directory listing successful Status: Retrieving directory listing... Command: CWD /web Response: 250 OK. Current directory is /web Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PORT 10,0,2,30,14,143 Response: 500 I won't open a connection to 10.0.2.30 (only to 188.220.xxx.xxx) Command: PASV Response: 227 Entering Passive Mode (78,46,79,147,234,110) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 57 matches total Error: Could not read from transfer socket: ECONNRESET - Connection reset by peer Error: Failed to retrieve directory listing Any suggestions please? I'm willing to try anything!

  Read the article

• Unable to connect to FTP server using Filezilla with router in-between

  - by pkswatch

  While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

  Read the article

• Mail server not sending or receiving after removal from barracuda blacklist to white list

  - by user137765

  Mail server not sending or receiving after removal from barracuda blacklist to white list. I've checked against black lists and the ip and domain are clean. 1and1 are saying its Barracuda black list and barracuda are saying its not blacklisted and that its somethign with 1and1 server. section from log file... Sep 20 04:29:25 vegaserve postfix/smtpd[16906]: connect from mta860.chtah.net[63.236.31.146] Sep 20 04:29:25 vegaserve postfix/smtpd[16070]: connect from host81-136-144-117.in-addr.btopenworld.com[81.136.144.117] Sep 20 04:29:27 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: raidon - short names not allowed from @ [201.80.253.153]ERR: 1348111767.185119 LOGOUT, [email protected], ip=[86.143.136.249], top=0, retr=0, time=151, rcvd=18, sent=283, maildir=/var/qmail/mailnames/mbelectrics.net/mb/Maildir Sep 20 04:29:28 vegaserve pop3d: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:28 vegaserve postfix/smtpd[15388]: connect from mta965.emails.itv.com[8.30.201.55] Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:29 vegaserve postfix/cleanup[24879]: 95CB31E87556C: message-id=<[email protected] Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: from=, size=975, nrcpt=1 (queue active) Sep 20 04:29:29 vegaserve postfix/smtpd[18194]: disconnect from uspmta172097.emarsys.net[195.54.172.97] Sep 20 04:29:29 vegaserve postfix/smtp[25748]: 95CB31E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:29 vegaserve postfix/bounce[25897]: warning: 95CB31E87556C: undeliverable postmaster notification discarded Sep 20 04:29:29 vegaserve postfix/qmgr[14378]: 95CB31E87556C: removed Sep 20 04:29:32 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:37 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rei - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:38 vegaserve postfix/smtpd[19328]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[18331]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:40 vegaserve postfix/cleanup[24825]: BD1A71E87556C: message-id=<[email protected] Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: from=, size=673, nrcpt=1 (queue active) Sep 20 04:29:40 vegaserve postfix/smtpd[24464]: disconnect from unknown[118.97.212.190] Sep 20 04:29:40 vegaserve postfix/smtp[25748]: BD1A71E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:40 vegaserve postfix/bounce[25995]: warning: BD1A71E87556C: undeliverable postmaster notification discarded Sep 20 04:29:40 vegaserve postfix/qmgr[14378]: BD1A71E87556C: removed Sep 20 04:29:41 vegaserve postfix/cleanup[24879]: 0A42B1E87556C: message-id=<[email protected] Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: from=, size=961, nrcpt=1 (queue active) Sep 20 04:29:41 vegaserve postfix/smtpd[18331]: disconnect from bay0-omc4-s10.bay0.hotmail.com[65.54.190.212] Sep 20 04:29:41 vegaserve postfix/smtp[25748]: 0A42B1E87556C: to=, orig_to=, relay=none, delay=0.03, delays=0.03/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:41 vegaserve postfix/bounce[25897]: warning: 0A42B1E87556C: undeliverable postmaster notification discarded Sep 20 04:29:41 vegaserve postfix/qmgr[14378]: 0A42B1E87556C: removed Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:43 vegaserve postfix/cleanup[24825]: 8F8991E87556C: message-id=<[email protected] Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: from=, size=946, nrcpt=1 (queue active) Sep 20 04:29:43 vegaserve postfix/smtpd[17511]: disconnect from blu0-omc4-s22.blu0.hotmail.com[65.55.111.161] Sep 20 04:29:43 vegaserve postfix/smtp[25748]: 8F8991E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.02/0/0.02/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:43 vegaserve postfix/bounce[25995]: warning: 8F8991E87556C: undeliverable postmaster notification discarded Sep 20 04:29:43 vegaserve postfix/qmgr[14378]: 8F8991E87556C: removed Sep 20 04:29:44 vegaserve postfix/cleanup[24879]: 088641E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: from=, size=1078, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[19328]: disconnect from smtp10.bis7.eu.blackberry.com[178.239.85.15] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 088641E87556C: to=, orig_to=, relay=none, delay=0.05, delays=0.03/0/0.01/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25995]: warning: 088641E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 088641E87556C: removed Sep 20 04:29:44 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rin - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:44 vegaserve postfix/cleanup[24825]: 946F51E87556C: message-id=<[email protected] Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: from=, size=1173, nrcpt=1 (queue active) Sep 20 04:29:44 vegaserve postfix/smtpd[18965]: disconnect from hubrelay-rd.bt.com[62.239.224.99] Sep 20 04:29:44 vegaserve postfix/smtp[25748]: 946F51E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:44 vegaserve postfix/bounce[25897]: warning: 946F51E87556C: undeliverable postmaster notification discarded Sep 20 04:29:44 vegaserve postfix/qmgr[14378]: 946F51E87556C: removed Sep 20 04:29:45 vegaserve postfix/smtpd[14816]: connect from col0-omc2-s12.col0.hotmail.com[65.55.34.86] Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:29:47 vegaserve postfix/cleanup[24879]: 961721E87556C: message-id=<[email protected] Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: from=, size=1082, nrcpt=1 (queue active) Sep 20 04:29:47 vegaserve postfix/smtpd[16900]: disconnect from mta-35d2.livingsocial.com[199.91.53.210] Sep 20 04:29:47 vegaserve postfix/smtp[25748]: 961721E87556C: to=, orig_to=, relay=none, delay=0.04, delays=0.04/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:29:47 vegaserve postfix/bounce[25995]: warning: 961721E87556C: undeliverable postmaster notification discarded Sep 20 04:29:47 vegaserve postfix/qmgr[14378]: 961721E87556C: removed Sep 20 04:29:50 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: rini - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:50 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:29:52 vegaserve postfix/smtpd[24478]: connect from col0-omc2-s13.col0.hotmail.com[65.55.34.87] Sep 20 04:29:52 vegaserve postfix/smtpd[18923]: connect from www.idbwplan.com[193.181.254.21] Sep 20 04:29:55 vegaserve postfix/smtpd[15968]: connect from 105-48.mta.dotmailer.com[94.143.105.48] Sep 20 04:29:56 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ringo - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:29:56 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:00 vegaserve postfix/smtpd[18772]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:01 vegaserve postfix/cleanup[24825]: 1DAD71E87556C: message-id=<[email protected] Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: from=, size=1022, nrcpt=1 (queue active) Sep 20 04:30:01 vegaserve postfix/smtpd[18772]: disconnect from mail95.us2.mcsv.net[173.231.139.95] Sep 20 04:30:01 vegaserve postfix/smtp[25748]: 1DAD71E87556C: to=, orig_to=, relay=none, delay=0.06, delays=0.05/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself) Sep 20 04:30:01 vegaserve postfix/bounce[25897]: warning: 1DAD71E87556C: undeliverable postmaster notification discarded Sep 20 04:30:01 vegaserve postfix/qmgr[14378]: 1DAD71E87556C: removed Sep 20 04:30:02 vegaserve pop3d: IMAP connect from @ [201.80.253.153]checkmailpasswd: FAILED: ritsuko - short names not allowed from @ [201.80.253.153]ERR: LOGIN FAILED, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: warning: connect to proxy service 127.0.0.1:10025: Connection timed out Sep 20 04:30:02 vegaserve pop3d: Connection, ip=[201.80.253.153] Sep 20 04:30:02 vegaserve postfix/cleanup[24879]: 8AADD1E87556C: message-id=<[email protected] Sep 20 04:30:02 vegaserve postfix/qmgr[14378]: 8AADD1E87556C: from=, size=1003, nrcpt=1 (queue active) Sep 20 04:30:02 vegaserve postfix/smtpd[16911]: disconnect from mr133.createsend.com[184.106.86.133] Sep 20 04:30:02 vegaserve postfix/smtp[25748]: 8AADD1E87556C: to=, orig_to=, relay=none, delay=0.02, delays=0.02/0/0/0, dsn=5.4.6, status=bounced (mail for vegaserve.com loops back to myself)

  Read the article

• Is there a way I can use $PATH as defined by my bash profile?

  - by Adam Backstrom

  I spend most of my day ssh'd into servers. I have a series of aliases/functions/scripts that allow me to type p hostname from the terminal and execute GNU screen(1) on the remote side, using the following command: exec ssh hostname -t 'screen -RD'` I've only recently noticed that ssh -t does not get my custom $PATH. Here's some terminal output: adam@workstation:~:0$ sh server 'echo $PATH' /home/adam/bin:/usr/local/bin:/bin:/usr/bin:/opt/git/bin:/opt/git/libexec/git-core adam@workstation:~:0$ ssh server -t 'echo $PATH' /usr/local/bin:/bin:/usr/bin Connection to uranus.plymouth.edu closed. My biggest problem is my custom aliases only try to execute screen, since I can't guarantee an absolute path, and my $PATH is structured so the shell should find the correct one. If my $PATH settings aren't honored, my scripts don't work. Is there a way I can use $PATH as defined by my .bashrc/.bash_profile? I believe PermitUserEnvironment is disabled.

  Read the article

• Identifying Httpd error log in Fedora 16

  - by Cerin

  How do you find the cause of httpd errors in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

  Read the article

• homebrew in mac lion

  - by user975352

  I'm beginner of mac lion(10.7.2). I don't know well about mac but ubuntu. I installed homebrew to my mac, and I did command below. $ brew install git and then $ brew update error: Could not resolve host: github.com; nodename nor servname provided, or not known while accessing https://github.com/mxcl/homebrew.git/info/refs fatal: HTTP request failed Error: Failed while executing git pull origin refs/heads/master:refs/remotes/origin/master What's happen in my mac? How to resolve this? Would you help me?

  Read the article

• "unrecognized options" while installing php

  - by user1692333

  I want to compile php 5.4.8 on my mac 10.8.2, but get some errors which cant solve by my self, so need your help. Firstly i get default php options with php -i | head, after it do this command ./configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --disable-dependency-tracking --sysconfdir=/private/etc --with-apxs2=/usr/sbin/apxs --enable-cli --with-config-file-path=/etc --with-libxml-dir=/usr --with-openssl=/usr --with-kerberos=/usr --with-zlib=/usr --enable-bcmath --with-bz2=/usr --enable-calendar --disable-cgi --with-curl=/usr --enable-dba --enable-ndbm=/usr --enable-exif --enable-fpm --enable-ftp --with-gd --with-freetype-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-jpeg-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --with-png-dir=/BinaryCache/apache_mod_php/apache_mod_php-79~4/Root/usr/local --enable-gd-native-ttf --with-icu-dir=/usr --with-iodbc=/usr --with-ldap=/usr --with-ldap-sasl=/usr --with-libedit=/usr --enable-mbstring --enable-mbregex --with-mysql=mysqlnd --with-mysqli=mysqlnd --without-pear --with-pdo-mysql=mysqlnd --with-mysql-sock=/var/mysql/mysql.sock --with-readline=/usr --enable-shmop --with-snmp=/usr --enable-soap --enable-sockets --enable-sqlite-utf8 --enable-suhosin --enable-sysvmsg --enable-sysvsem --enable-sysvshm --with-tidy --enable-wddx --with-xmlrpc --with-iconv-dir=/usr --with-xsl=/usr --enable-zend-multibyte --enable-zip --with-pcre-regex --with-pgsql=/usr --with-pdo-pgsql=/usr But get this error config.status: creating Makefile config.status: creating jconfig.h config.status: jconfig.h is unchanged config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --enable-cli, --with-config-file-path, --with-libxml-dir, --with-openssl, --with-kerberos, --with-zlib, --enable-bcmath, --with-bz2, --enable-calendar, --disable-cgi, --with-curl, --enable-dba, --enable-ndbm, --enable-exif, --enable-fpm, --enable-ftp, --with-gd, --with-freetype-dir, --with-jpeg-dir, --with-png-dir, --enable-gd-native-ttf, --with-icu-dir, --with-iodbc, --with-ldap, --with-ldap-sasl, --with-libedit, --enable-mbstring, --enable-mbregex, --with-mysql, --with-mysqli, --without-pear, --with-pdo-mysql, --with-mysql-sock, --with-readline, --enable-shmop, --with-snmp, --enable-soap, --enable-sockets, --enable-sqlite-utf8, --enable-suhosin, --enable-sysvmsg, --enable-sysvsem, --enable-sysvshm, --with-tidy, --enable-wddx, --with-xmlrpc, --with-iconv-dir, --with-xsl, --enable-zend-multibyte, --enable-zip, --with-pcre-regex, --with-pgsql, --with-pdo-pgsql Maybe someone have some suggestions on this?

  Read the article

• Filezilla connection error

  - by Kumar P

  I have RHEL 5 lan server with squid 2.6 stable proxy settings, Under this have some windows xp desktops Now i installed filezilla ftp client in windows xp, for give services to my client's websites But i can't connect ftp servers throw filezilla , I set generic proxy too. ( HTTP/1.1 USING CONNECT method ) I get error message like this, Status: Connecting to (ftp hostname) through proxy Status: Connecting to hostname:port... Status: Connection with proxy established, performing handshake... Response: Proxy reply: HTTP/1.0 403 Forbidden How can i solve this problem ?

  Read the article

• CARP: two machines think they're the master, but only on one interface

  - by Conor McDermottroe

  I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

  Read the article

• Error when starting qpidd as a service

  - by Sparks

  I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

  Read the article

• SQL Server 2008 R2 cluster on Windows Server 20008 R2 issue

  - by Yousui

  I have a SQL Server 2008 R2 cluster on Windows Server 20008 R2. There are 2 nodes node1 and node2 in the cluster. When I start node1 and node2, I get the following statue information from them: From node1: C:\>cluster node Listing status for all available nodes: Node Node ID Status -------------- ------- --------------------- node1 1 Joining node2 2 Down C:\> From node2: C:\>cluster node Listing status for all available nodes: Node Node ID Status -------------- ------- --------------------- node1 1 Down node2 2 Joining C:\> I tried to use the cluster manager to investigate, but it seems it just can't connect to the cluster. How to investigate this issue? Thanks.

  Read the article

• Starting nginx with systemctl fails, but running the command manually doesn't

  - by Ivan

  On Arch Linux, for some reason, when I try to start nginx with the command "systemctl start nginx", it fails, with this being the output of "systemctl status nginx": Loaded: loaded (/etc/systemd/system/nginx.service; enabled) Active: failed (Result: exit-code) since Wed 2013-10-30 16:22:17 EDT; 5s ago Process: 9835 ExecStop=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g pid /run/nginx.pid; -s quit (code=exited, status=126) Process: 3982 ExecStart=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=0/SUCCESS) Process: 10967 ExecStartPre=/usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -t -q -g pid /run/nginx.pid; daemon on; master_process on; (code=exited, status=126) Main PID: 3984 (code=exited, status=0/SUCCESS) CGroup: /system.slice/nginx.service ...but when I run /usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -t -q -g "pid /run/nginx.pid; daemon on; master_process on;" and then /usr/bin/chroot --userspec=http:http /home/nginx /usr/bin/nginx -g "pid /run/nginx.pid; daemon on; master_process on;" as root, all it does is return a warning, but works just fine: nginx: [warn] the "user" directive makes sense only if the master process runs with super-user privileges, ignored in /etc/nginx/nginx.conf:1 Why is it doing that?

  Read the article

• SSH Port Forward 22

  - by j1199dm

  I'm trying to set up the following: At work I want to create a local port that will forward to port 22 on my home server. ssh -L 56879:home:22 username@home -p 443 right now I'm testing this on my two machines at home, my ubuntu server and the other my iMac. iMac: 192.168.1.104 ubuntu: 192.168.1.103 iMac - ssh -p 443 -L 56879:192.168.1.103:22 [email protected] in my ~/.ssh/config on my iMac I have port set to 56879. so when I do git pull remoteserver:/path/to/repo.git on my iMac git will use ssh client on my iMac and use port 56879 since setup in config which should forward to 22 on my ubuntu machine. I keep getting connection refused? Any ideas?

  Read the article

• Where is the read/unread field in Outlook 2010 custom search?

  - by Ken

  I am trying to create a custom search folder in outlook 2010. I am using the "advanced" tab in the "search folder criteria" dialog. One of the criteria I need is the read/unread status of an message. But the "field" dropdown does not contain a field corresponding to read/unread status (see screen shot below). This is odd because the read/unread status is available in the "More Choices" tab, but seemingly not in the "advanced" tab. How do I create an advanced search folder criteria which incorporates the read/unread status of a message?

  Read the article

• Troubleshooting an NFS server hanging after authenticated mount request

  - by Christoph

  I need some advice on troubleshooting an NFS server problem on Scientific Linux (RHEL) 6.1. The log on the server shows that an authenticated mount request was made: Jan 13 16:30:02 ??? rpc.mountd[3996]: authenticated mount request from ????:784 for /shared-storage/cm/shared (/shared-storage/cm/shared) But after that, it does not continue. On the client, it is also hanging. The interesting thing now is that I have two NFS servers, which should be identical, and the one is working perfectly, but the other exhibits the above mentioned behaviour. The problem is also not completely persistent, i. e. sometimes the mount request succeeds. I assume that the problem must be related to the server rather than to the client, because it is working perfectly on the other server. My question is where I should search the problem. I have already re-created the exports using exportfs -r, I have restarted the NFS server, I have compared the rpcinfo outputs of both server - no success. The problem even survives a reboot. Any other ideas are appreciated. As answer to Tim's question: I have sporadically the following in dmesg, but do not know whether it is related e1000e 0000:0c:00.0: eth4: Detected Hardware Unit Hang: TDH <24> TDT <25> next_to_use <25> next_to_clean <24> buffer_info[next_to_clean]: time_stamp <1c3d12940> next_to_watch <24> jiffies <1c3d12940> next_to_watch.status <0> MAC Status <80383> PHY Status <792d> PHY 1000BASE-T Status <7800> PHY Extended Status <3000> PCI Status <10> Further edit: The problem above does not occur on the machine that is working, so it probably is related. Again an edit: The error is not on the (software) device that is used for NFS, but on another one. The NFS mount also does not trigger the message.

  Read the article

• Integrating Nagios with a ticketing system/incident mnagement system

  - by sektor

  Is there a free ticketing system/incident management system which will help me in achieving the following? 1) If a service goes down then Nagios alerts the on-duty staff and pushes the status to some backend or DB as a ticket, say the initial status is "New". 2) The on-duty staff logs in through a frontend and acknowledges the new ticket by marking it as "In progress", so now the status of the ticket changes from "New" to "In progress". 3) If even after "n" number of minutes no person from on-duty staff has changed the ticket status to "In progress" then Nagios alerts the next level of contacts. Although if the on-duty staff has acknowledged the ticket then there is no need to alert the next level. 4) When the service comes up Nagios closes the ticket by marking it "Closed" Now I already have Nagios monitoring set up and currently it alerts by sending text messages and mails, what I'm looking for is some framework which only escalates the issue(alerts the second level) if the first level(on-duty staff) fails to respond to the initial alert. By "responding to the alert" I mean, the on-duty staff can login via some frontend and basically change the status to something like "Acknowledged" or "In progress".

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• What Are All the Variables Necessary to Create Blackbox Logs for Nginx?

  - by Alan Gutierrez

  There's an article out there, Profiling LAMP Applications with Apache's Blackbox Logs, that describes how to create a log that records a lot of detailed information missing in the common and combined log formats. This information is supposed to help you resolve performance issues. As the author notes "While the common log-file format (and the combined format) are great for hit tracking, they aren't suitable for getting hardcore performance data." The article describes a "blackbox" log format, like a blackbox flight recorder on an aircraft, that gathers information used to profile server performance, missing from the hit tracking log formats: Keep alive status, remote port, child processes, bytes sent, etc. LogFormat "%a/%S %X %t \"%r\" %s/%>s %{pid}P/%{tid}P %T/%D %I/%O/%B" blackbox I'm trying to recreate as much of the format for Nginx, and would like help filling in the blanks. Here's what Nginx blackbox format would look like, the unmapped Apache directives have question marks after their names. access_log blackbox '$remote_addr/$remote_port X? [$time_local] "$request"' 's?/$status $pid/0 T?/D? I?/O?/B?' Here's a table of the variables I've been able to map from the Nginx documentation. %a = $remote_addr - The IP address of the remote client. %S = $remote_port - The port of the remote client. %X = ? - Keep alive status. %t = $time_local - The start time of the request. %r = $request - The first line of request containing method verb, path and protocol. %s = ? - Status before any redirections. %>s = $status - Status after any redirections. %{pid}P = $pid - The process id. %{tid}P = N/A - The thread id, which is non-applicable to Nignx. %T = ? - The time in seconds to handle the request. %D = ? - The time in milliseconds to handle the request. %I = ? - The count of bytes received including headers. %O = ? - The count of bytes sent including headers. %B = ? - The count of bytes sent excluding headers, but with a 0 for none instead of '-'. Looking for help filling in the missing variables, or confirmation that the missing variables are in fact, unavailable in Nginx.

  Read the article

• Allowing non-admin users to unstick the print spooler

  - by Reafidy

  I currently have an issue where the print que is getting stuck on a central print server (windows server 2008). Using the "Clear all documents" function does not clear it and gets stuck too. I need non-admin users to be able to clear the print cue from there work stations. I have tried using the following winforms program which I created and allows a user to stop the print spooler, delete printer files in the "C:\Windows\System32\spool\PRINTERS folder" and then start the print spooler but this functionality requires the program to be runs as an administrator, how can I allow my normal users to execute this program without giving them admin privileges? Or is there another way I can allow normal user to clear the print que on the server? Imports System.ServiceProcess Public Class Form1 Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click ClearJammedPrinter() End Sub Public Sub ClearJammedPrinter() Dim tspTimeOut As TimeSpan = New TimeSpan(0, 0, 5) Dim controllerStatus As ServiceControllerStatus = ServiceController1.Status Try If ServiceController1.Status <> ServiceProcess.ServiceControllerStatus.Stopped Then ServiceController1.Stop() End If Try ServiceController1.WaitForStatus(ServiceProcess.ServiceControllerStatus.Stopped, tspTimeOut) Catch Throw New Exception("The controller could not be stopped") End Try Dim strSpoolerFolder As String = "C:\Windows\System32\spool\PRINTERS" Dim s As String For Each s In System.IO.Directory.GetFiles(strSpoolerFolder) System.IO.File.Delete(s) Next s Catch ex As Exception MsgBox(ex.Message) Finally Try Select Case controllerStatus Case ServiceControllerStatus.Running If ServiceController1.Status <> ServiceControllerStatus.Running Then ServiceController1.Start() Case ServiceControllerStatus.Stopped If ServiceController1.Status <> ServiceControllerStatus.Stopped Then ServiceController1.Stop() End Select ServiceController1.WaitForStatus(controllerStatus, tspTimeOut) Catch MsgBox(String.Format("{0}{1}", "The print spooler service could not be returned to its original setting and is currently: ", ServiceController1.Status)) End Try End Try End Sub End Class

  Read the article

• How Can We Create Blackbox Logs for Nginx?

  - by Alan Gutierrez

  There's an article out there, Profiling LAMP Applications with Apache's Blackbox Logs, that describes how to create a log that records a lot of detailed information missing in the common and combined log formats. This information is supposed to help you resolve performance issues. As the author notes "While the common log-file format (and the combined format) are great for hit tracking, they aren't suitable for getting hardcore performance data." The article describes a "blackbox" log format, like a blackbox flight recorder on an aircraft, that gathers information used to profile server performance, missing from the hit tracking log formats: Keep alive status, remote port, child processes, bytes sent, etc. LogFormat "%a/%S %X %t \"%r\" %s/%>s %{pid}P/%{tid}P %T/%D %I/%O/%B" blackbox I'm trying to recreate as much of the format for Nginx, and would like help filling in the blanks. Here's what Nginx blackbox format would look like, the unmapped Apache directives have question marks after their names. access_log blackbox '$remote_addr/$remote_port X? [$time_local] "$request"' 's?/$status $pid/0 T?/D? I?/$bytes_sent/$body_bytes_sent' Here's a table of the variables I've been able to map from the Nginx documentation. %a = $remote_addr - The IP address of the remote client. %S = $remote_port - The port of the remote client. %X = ? - Keep alive status. %t = $time_local - The start time of the request. %r = $request - The first line of request containing method verb, path and protocol. %s = ? - Status before any redirections. %>s = $status - Status after any redirections. %{pid}P = $pid - The process id. %{tid}P = N/A - The thread id, which is non-applicable to Nignx. %T = ? - The time in seconds to handle the request. %D = $request_time - The time in milliseconds to handle the request. %I = ? - The count of bytes received including headers. %O = $bytes_sent - The count of bytes sent including headers. %B = $body_bytes_sent - The count of bytes sent excluding headers, but with a 0 for none instead of '-'. Looking for help filling in the missing variables, or confirmation that the missing variables are in fact, unavailable in Nginx.

  Read the article

• Zpool disk failure - Where am I at?

  - by JT.WK

  After checking the status of one of my zpools today, I was faced with the following: root@server: zpool status -v myPool pool: myPool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://www.sun.com/msg/ZFS-8000-9P scrub: resilver completed after 3h6m with 0 errors on Tue Sep 28 11:15:11 2010 config: NAME STATE READ WRITE CKSUM myPool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c6t7d0 ONLINE 0 0 0 c6t8d0 ONLINE 0 0 0 spare ONLINE 0 0 0 c6t9d0 ONLINE 54 0 0 c6t36d0 ONLINE 0 0 0 c6t10d0 ONLINE 0 0 0 c6t11d0 ONLINE 0 0 0 c6t12d0 ONLINE 0 0 0 spares c6t36d0 INUSE currently in use c6t37d0 AVAIL c6t38d0 AVAIL errors: No known data errors From what I can see, c6t9d0 has encountered 54 write errors. It seems as though it has automatically resilvered with the spare disk c6t36d0, which is now currently in use. My question is, where exactly am I at? Yes the 'action' tells me to determine whether or not the disk needs replacing, but is this disk currently still in use? Can I replace / remove it? Any explanation would be much appreciated as I'm quite new to this stuff :) update: After following the advice from C10k Consulting, ie detaching: zpool detach myPool c6t9d0 and adding as a spare: zpool add myPool spare c6t9d0 It appears as though all is well. The new status of my zpool is: root@server: zpool status -v myPool pool: myPool state: ONLINE scrub: resilver completed after 3h6m with 0 errors on Tue Sep 28 11:15:11 2010 config: NAME STATE READ WRITE CKSUM muPool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c6t7d0 ONLINE 0 0 0 c6t8d0 ONLINE 0 0 0 c6t36d0 ONLINE 0 0 0 c6t10d0 ONLINE 0 0 0 c6t11d0 ONLINE 0 0 0 c6t12d0 ONLINE 0 0 0 spares c6t37d0 AVAIL c6t38d0 AVAIL c6t9d0 AVAIL errors: No known data errors Thanks for your help c10k consulting :)

  Read the article

• Identifying Service Error in Fedora 16

  - by Cerin

  How do you find the cause of a failed service start in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• How to remove a package I compiled and installed manually?

  - by macek

  I recently compiled and installed Git on a new install of Mac OS 10.6 but it didn't install the documentation. I now realize I should've used the precompiled package offered here: http://code.google.com/p/git-osx-installer/downloads/list How do I remove all the files that I added to my system using make install with the Git source code? Edit: I've had similar problems in the past with other packages, too. For example, ./configure with the incorrect --prefix= or something. What's the general practice for removing unix packages?

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >